| ############################################################################## |
| # ## |
| ############################################################################## # |
| # # # |
| # Generic Policy file # # |
| # V1.2.0rh # # |
| # August 9, 2001 # # |
| # ## |
| ############################################################################## |
| |
| |
| ############################################################################## |
| # ## |
| ############################################################################## # |
| # # # |
| # This is the example Tripwire Policy file. It is intended as a place to # # |
| # start creating your own custom Tripwire Policy file. Referring to it as # # |
| # well as the Tripwire Policy Guide should give you enough information to # # |
| # make a good custom Tripwire Policy file that better covers your # # |
| # configuration and security needs. A text version of this policy file is # # |
| # called twpol.txt. # # |
| # # # |
| # Note that this file is tuned to an 'everything' install of Red Hat Linux. # # |
| # If run unmodified, this file should create no errors on database # # |
| # creation, or violations on a subsiquent integrity check. However, it is # # |
| # impossible for there to be one policy file for all machines, so this # # |
| # existing one errs on the side of security. Your Linux configuration will # # |
| # most likey differ from the one our policy file was tuned to, and will # # |
| # therefore require some editing of the default Tripwire Policy file. # # |
| # # # |
| # The example policy file is best run with 'Loose Directory Checking' # # |
| # enabled. Set LOOSEDIRECTORYCHECKING=TRUE in the Tripwire Configuration # # |
| # file. # # |
| # # # |
| # Email support is not included and must be added to this file. # # |
| # Add the 'emailto=' to the rule directive section of each rule (add a comma # # |
| # after the 'severity=' line and add an 'emailto=' and include the email # # |
| # addresses you want the violation reports to go to). Addresses are # # |
| # semi-colon delimited. # # |
| # ## |
| ############################################################################## |
| |
| |
| |
| ############################################################################## |
| # ## |
| ############################################################################## # |
| # # # |
| # Global Variable Definitions # # |
| # # # |
| # These are defined at install time by the installation script. You may # # |
| # Manually edit these if you are using this file directly and not from the # # |
| # installation script itself. # # |
| # ## |
| ############################################################################## |
| |
| @@section GLOBAL |
| TWROOT=/usr/sbin; |
| TWBIN=/usr/sbin; |
| TWPOL="/etc/tripwire"; |
| TWDB="/var/lib/tripwire"; |
| TWSKEY="/etc/tripwire"; |
| TWLKEY="/etc/tripwire"; |
| TWREPORT="/var/lib/tripwire/report"; |
| HOSTNAME=localhost; |
| |
| @@section FS |
| SEC_CRIT = $(IgnoreNone)-SHa ; # Critical files that cannot change |
| SEC_SUID = $(IgnoreNone)-SHa ; # Binaries with the SUID or SGID flags set |
| SEC_BIN = $(ReadOnly) ; # Binaries that should not change |
| SEC_CONFIG = $(Dynamic) ; # Config files that are changed infrequently but accessed often |
| SEC_LOG = $(Growing) ; # Files that grow, but that should never change ownership |
| SEC_INVARIANT = +tpug ; # Directories that should never change permission or ownership |
| SIG_LOW = 33 ; # Non-critical files that are of minimal security impact |
| SIG_MED = 66 ; # Non-critical files that are of significant security impact |
| SIG_HI = 100 ; # Critical files that are significant points of vulnerability |
| |
| |
| # Tripwire Binaries |
| ( |
| rulename = "Tripwire Binaries", |
| severity = $(SIG_HI) |
| ) |
| { |
| $(TWBIN)/siggen -> $(SEC_BIN) ; |
| $(TWBIN)/tripwire -> $(SEC_BIN) ; |
| $(TWBIN)/twadmin -> $(SEC_BIN) ; |
| $(TWBIN)/twprint -> $(SEC_BIN) ; |
| } |
| |
| # Tripwire Data Files - Configuration Files, Policy Files, Keys, Reports, Databases |
| ( |
| rulename = "Tripwire Data Files", |
| severity = $(SIG_HI) |
| ) |
| { |
| # NOTE: We remove the inode attribute because when Tripwire creates a backup, |
| # it does so by renaming the old file and creating a new one (which will |
| # have a new inode number). Inode is left turned on for keys, which shouldn't |
| # ever change. |
| |
| # NOTE: The first integrity check triggers this rule and each integrity check |
| # afterward triggers this rule until a database update is run, since the |
| # database file does not exist before that point. |
| |
| $(TWDB) -> $(SEC_CONFIG) -i ; |
| $(TWPOL)/tw.pol -> $(SEC_BIN) -i ; |
| $(TWPOL)/tw.cfg -> $(SEC_BIN) -i ; |
| $(TWLKEY)/$(HOSTNAME)-local.key -> $(SEC_BIN) ; |
| $(TWSKEY)/site.key -> $(SEC_BIN) ; |
| |
| #don't scan the individual reports |
| $(TWREPORT) -> $(SEC_CONFIG) (recurse=0) ; |
| } |
| |
| |
| # Tripwire HQ Connector Binaries |
| #( |
| # rulename = "Tripwire HQ Connector Binaries", |
| # severity = $(SIG_HI) |
| #) |
| #{ |
| # $(TWBIN)/hqagent -> $(SEC_BIN) ; |
| #} |
| # |
| # Tripwire HQ Connector - Configuration Files, Keys, and Logs |
| |
| ############################################################################## |
| # ## |
| ############################################################################## # |
| # # # |
| # Note: File locations here are different than in a stock HQ Connector # # |
| # installation. This is because Tripwire 2.3 uses a different path # # |
| # structure than Tripwire 2.2.1. # # |
| # # # |
| # You may need to update your HQ Agent configuation file (or this policy # # |
| # file) to correct the paths. We have attempted to support the FHS standard # # |
| # here by placing the HQ Agent files similarly to the way Tripwire 2.3 # # |
| # places them. # # |
| # ## |
| ############################################################################## |
| |
| #( |
| # rulename = "Tripwire HQ Connector Data Files", |
| # severity = $(SIG_HI) |
| #) |
| #{ |
| # ############################################################################# |
| # ############################################################################## |
| # # NOTE: Removing the inode attribute because when Tripwire creates a backup ## |
| # # it does so by renaming the old file and creating a new one (which will ## |
| # # have a new inode number). Leaving inode turned on for keys, which ## |
| # # shouldn't ever change. ## |
| # ############################################################################# |
| # |
| # $(TWBIN)/agent.cfg -> $(SEC_BIN) -i ; |
| # $(TWLKEY)/authentication.key -> $(SEC_BIN) ; |
| # $(TWDB)/tasks.dat -> $(SEC_CONFIG) ; |
| # $(TWDB)/schedule.dat -> $(SEC_CONFIG) ; |
| # |
| # # Uncomment if you have agent logging enabled. |
| # #/var/log/tripwire/agent.log -> $(SEC_LOG) ; |
| #} |
| |
| |
| |
| # Commonly accessed directories that should remain static with regards to owner and group |
| ( |
| rulename = "Invariant Directories", |
| severity = $(SIG_MED) |
| ) |
| { |
| / -> $(SEC_INVARIANT) (recurse = 0) ; |
| /home -> $(SEC_INVARIANT) (recurse = 0) ; |
| /etc -> $(SEC_INVARIANT) (recurse = 0) ; |
| } |
| ################################################ |
| # ## |
| ################################################ # |
| # # # |
| # File System and Disk Administration Programs # # |
| # ## |
| ################################################ |
| |
| ( |
| rulename = "File System and Disk Administraton Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /sbin/accton -> $(SEC_CRIT) ; |
| /sbin/badblocks -> $(SEC_CRIT) ; |
| /sbin/busybox -> $(SEC_CRIT) ; |
| /sbin/busybox.anaconda -> $(SEC_CRIT) ; |
| /sbin/convertquota -> $(SEC_CRIT) ; |
| /sbin/dosfsck -> $(SEC_CRIT) ; |
| /sbin/debugfs -> $(SEC_CRIT) ; |
| /sbin/debugreiserfs -> $(SEC_CRIT) ; |
| /sbin/dumpe2fs -> $(SEC_CRIT) ; |
| /sbin/dump -> $(SEC_CRIT) ; |
| /sbin/dump.static -> $(SEC_CRIT) ; |
| # /sbin/e2fsadm -> $(SEC_CRIT) ; tune2fs? |
| /sbin/e2fsck -> $(SEC_CRIT) ; |
| /sbin/e2label -> $(SEC_CRIT) ; |
| /sbin/fdisk -> $(SEC_CRIT) ; |
| /sbin/fsck -> $(SEC_CRIT) ; |
| /sbin/fsck.ext2 -> $(SEC_CRIT) ; |
| /sbin/fsck.ext3 -> $(SEC_CRIT) ; |
| /sbin/fsck.minix -> $(SEC_CRIT) ; |
| /sbin/fsck.msdos -> $(SEC_CRIT) ; |
| /sbin/fsck.vfat -> $(SEC_CRIT) ; |
| /sbin/ftl_check -> $(SEC_CRIT) ; |
| /sbin/ftl_format -> $(SEC_CRIT) ; |
| /sbin/hdparm -> $(SEC_CRIT) ; |
| #/sbin/lvchange -> $(SEC_CRIT) ; |
| #/sbin/lvcreate -> $(SEC_CRIT) ; |
| #/sbin/lvdisplay -> $(SEC_CRIT) ; |
| #/sbin/lvextend -> $(SEC_CRIT) ; |
| #/sbin/lvmchange -> $(SEC_CRIT) ; |
| #/sbin/lvmcreate_initrd -> $(SEC_CRIT) ; |
| #/sbin/lvmdiskscan -> $(SEC_CRIT) ; |
| #/sbin/lvmsadc -> $(SEC_CRIT) ; |
| #/sbin/lvmsar -> $(SEC_CRIT) ; |
| #/sbin/lvreduce -> $(SEC_CRIT) ; |
| #/sbin/lvremove -> $(SEC_CRIT) ; |
| #/sbin/lvrename -> $(SEC_CRIT) ; |
| #/sbin/lvscan -> $(SEC_CRIT) ; |
| /sbin/mkbootdisk -> $(SEC_CRIT) ; |
| /sbin/mkdosfs -> $(SEC_CRIT) ; |
| /sbin/mke2fs -> $(SEC_CRIT) ; |
| /sbin/mkfs -> $(SEC_CRIT) ; |
| /sbin/mkfs.bfs -> $(SEC_CRIT) ; |
| /sbin/mkfs.ext2 -> $(SEC_CRIT) ; |
| /sbin/mkfs.minix -> $(SEC_CRIT) ; |
| /sbin/mkfs.msdos -> $(SEC_CRIT) ; |
| /sbin/mkfs.vfat -> $(SEC_CRIT) ; |
| /sbin/mkinitrd -> $(SEC_CRIT) ; |
| #/sbin/mkpv -> $(SEC_CRIT) ; |
| /sbin/mkraid -> $(SEC_CRIT) ; |
| /sbin/mkreiserfs -> $(SEC_CRIT) ; |
| /sbin/mkswap -> $(SEC_CRIT) ; |
| #/sbin/mtx -> $(SEC_CRIT) ; |
| /sbin/pam_console_apply -> $(SEC_CRIT) ; |
| /sbin/parted -> $(SEC_CRIT) ; |
| /sbin/pcinitrd -> $(SEC_CRIT) ; |
| #/sbin/pvchange -> $(SEC_CRIT) ; |
| #/sbin/pvcreate -> $(SEC_CRIT) ; |
| #/sbin/pvdata -> $(SEC_CRIT) ; |
| #/sbin/pvdisplay -> $(SEC_CRIT) ; |
| #/sbin/pvmove -> $(SEC_CRIT) ; |
| #/sbin/pvscan -> $(SEC_CRIT) ; |
| /sbin/quotacheck -> $(SEC_CRIT) ; |
| /sbin/quotaon -> $(SEC_CRIT) ; |
| /sbin/raidstart -> $(SEC_CRIT) ; |
| /sbin/reiserfsck -> $(SEC_CRIT) ; |
| /sbin/resize2fs -> $(SEC_CRIT) ; |
| /sbin/resize_reiserfs -> $(SEC_CRIT) ; |
| /sbin/restore -> $(SEC_CRIT) ; |
| /sbin/restore.static -> $(SEC_CRIT) ; |
| /sbin/scsi_info -> $(SEC_CRIT) ; |
| /sbin/sfdisk -> $(SEC_CRIT) ; |
| /sbin/stinit -> $(SEC_CRIT) ; |
| #/sbin/tapeinfo -> $(SEC_CRIT) ; |
| /sbin/tune2fs -> $(SEC_CRIT) ; |
| /sbin/unpack -> $(SEC_CRIT) ; |
| /sbin/update -> $(SEC_CRIT) ; |
| #/sbin/vgcfgbackup -> $(SEC_CRIT) ; |
| #/sbin/vgcfgrestore -> $(SEC_CRIT) ; |
| #/sbin/vgchange -> $(SEC_CRIT) ; |
| #/sbin/vgck -> $(SEC_CRIT) ; |
| #/sbin/vgcreate -> $(SEC_CRIT) ; |
| #/sbin/vgdisplay -> $(SEC_CRIT) ; |
| #/sbin/vgexport -> $(SEC_CRIT) ; |
| #/sbin/vgextend -> $(SEC_CRIT) ; |
| #/sbin/vgimport -> $(SEC_CRIT) ; |
| #/sbin/vgmerge -> $(SEC_CRIT) ; |
| #/sbin/vgmknodes -> $(SEC_CRIT) ; |
| #/sbin/vgreduce -> $(SEC_CRIT) ; |
| #/sbin/vgremove -> $(SEC_CRIT) ; |
| #/sbin/vgrename -> $(SEC_CRIT) ; |
| #/sbin/vgscan -> $(SEC_CRIT) ; |
| #/sbin/vgsplit -> $(SEC_CRIT) ; |
| /bin/chgrp -> $(SEC_CRIT) ; |
| /bin/chmod -> $(SEC_CRIT) ; |
| /bin/chown -> $(SEC_CRIT) ; |
| /bin/cp -> $(SEC_CRIT) ; |
| /bin/cpio -> $(SEC_CRIT) ; |
| /bin/mount -> $(SEC_CRIT) ; |
| /bin/umount -> $(SEC_CRIT) ; |
| /bin/mkdir -> $(SEC_CRIT) ; |
| /bin/mknod -> $(SEC_CRIT) ; |
| /bin/mktemp -> $(SEC_CRIT) ; |
| /bin/rm -> $(SEC_CRIT) ; |
| /bin/rmdir -> $(SEC_CRIT) ; |
| /bin/touch -> $(SEC_CRIT) ; |
| } |
| |
| ################################## |
| # ## |
| ################################## # |
| # # # |
| # Kernel Administration Programs # # |
| # ## |
| ################################## |
| |
| ( |
| rulename = "Kernel Administration Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /sbin/adjtimex -> $(SEC_CRIT) ; |
| /sbin/ctrlaltdel -> $(SEC_CRIT) ; |
| /sbin/depmod -> $(SEC_CRIT) ; |
| /sbin/insmod -> $(SEC_CRIT) ; |
| /sbin/insmod.static -> $(SEC_CRIT) ; |
| /sbin/insmod_ksymoops_clean -> $(SEC_CRIT) ; |
| /sbin/klogd -> $(SEC_CRIT) ; |
| /sbin/ldconfig -> $(SEC_CRIT) ; |
| /sbin/minilogd -> $(SEC_CRIT) ; |
| /sbin/modinfo -> $(SEC_CRIT) ; |
| #/sbin/nuactlun -> $(SEC_CRIT) ; |
| #/sbin/nuscsitcpd -> $(SEC_CRIT) ; |
| /sbin/pivot_root -> $(SEC_CRIT) ; |
| /sbin/sndconfig -> $(SEC_CRIT) ; |
| /sbin/sysctl -> $(SEC_CRIT) ; |
| } |
| |
| ####################### |
| # ## |
| ####################### # |
| # # # |
| # Networking Programs # # |
| # ## |
| ####################### |
| |
| ( |
| rulename = "Networking Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /etc/sysconfig/network-scripts/ifdown -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-cipcb -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-ippp -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-ipv6 -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-isdn -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-post -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-ppp -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-sit -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifdown-sl -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-aliases -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-cipcb -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-ippp -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-ipv6 -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-isdn -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-plip -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-plusb -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-post -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-ppp -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-routes -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-sit -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-sl -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/ifup-wireless -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/network-functions -> $(SEC_CRIT) ; |
| /etc/sysconfig/network-scripts/network-functions-ipv6 -> $(SEC_CRIT) ; |
| /bin/ping -> $(SEC_CRIT) ; |
| /sbin/agetty -> $(SEC_CRIT) ; |
| /sbin/arp -> $(SEC_CRIT) ; |
| /sbin/arping -> $(SEC_CRIT) ; |
| /sbin/dhcpcd -> $(SEC_CRIT) ; |
| /sbin/ether-wake -> $(SEC_CRIT) ; |
| #/sbin/getty -> $(SEC_CRIT) ; |
| /sbin/ifcfg -> $(SEC_CRIT) ; |
| /sbin/ifconfig -> $(SEC_CRIT) ; |
| /sbin/ifdown -> $(SEC_CRIT) ; |
| /sbin/ifenslave -> $(SEC_CRIT) ; |
| /sbin/ifport -> $(SEC_CRIT) ; |
| /sbin/ifup -> $(SEC_CRIT) ; |
| /sbin/ifuser -> $(SEC_CRIT) ; |
| /sbin/ip -> $(SEC_CRIT) ; |
| /sbin/ip6tables -> $(SEC_CRIT) ; |
| /sbin/ipchains -> $(SEC_CRIT) ; |
| /sbin/ipchains-restore -> $(SEC_CRIT) ; |
| /sbin/ipchains-save -> $(SEC_CRIT) ; |
| /sbin/ipfwadm -> $(SEC_CRIT) ; |
| /sbin/ipmaddr -> $(SEC_CRIT) ; |
| /sbin/iptables -> $(SEC_CRIT) ; |
| /sbin/iptables-restore -> $(SEC_CRIT) ; |
| /sbin/iptables-save -> $(SEC_CRIT) ; |
| /sbin/iptunnel -> $(SEC_CRIT) ; |
| #/sbin/ipvsadm -> $(SEC_CRIT) ; |
| #/sbin/ipvsadm-restore -> $(SEC_CRIT) ; |
| #/sbin/ipvsadm-save -> $(SEC_CRIT) ; |
| /sbin/ipx_configure -> $(SEC_CRIT) ; |
| /sbin/ipx_interface -> $(SEC_CRIT) ; |
| /sbin/ipx_internal_net -> $(SEC_CRIT) ; |
| /sbin/iwconfig -> $(SEC_CRIT) ; |
| /sbin/iwgetid -> $(SEC_CRIT) ; |
| /sbin/iwlist -> $(SEC_CRIT) ; |
| /sbin/iwpriv -> $(SEC_CRIT) ; |
| /sbin/iwspy -> $(SEC_CRIT) ; |
| /sbin/mgetty -> $(SEC_CRIT) ; |
| /sbin/mingetty -> $(SEC_CRIT) ; |
| /sbin/nameif -> $(SEC_CRIT) ; |
| /sbin/netreport -> $(SEC_CRIT) ; |
| /sbin/plipconfig -> $(SEC_CRIT) ; |
| /sbin/portmap -> $(SEC_CRIT) ; |
| /sbin/ppp-watch -> $(SEC_CRIT) ; |
| #/sbin/rarp -> $(SEC_CRIT) ; |
| /sbin/route -> $(SEC_CRIT) ; |
| /sbin/slattach -> $(SEC_CRIT) ; |
| /sbin/tc -> $(SEC_CRIT) ; |
| #/sbin/uugetty -> $(SEC_CRIT) ; |
| /sbin/vgetty -> $(SEC_CRIT) ; |
| /sbin/ypbind -> $(SEC_CRIT) ; |
| } |
| |
| ################################## |
| # ## |
| ################################## # |
| # # # |
| # System Administration Programs # # |
| # ## |
| ################################## |
| |
| ( |
| rulename = "System Administration Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /sbin/chkconfig -> $(SEC_CRIT) ; |
| /sbin/fuser -> $(SEC_CRIT) ; |
| /sbin/halt -> $(SEC_CRIT) ; |
| /sbin/init -> $(SEC_CRIT) ; |
| /sbin/initlog -> $(SEC_CRIT) ; |
| /sbin/install-info -> $(SEC_CRIT) ; |
| /sbin/killall5 -> $(SEC_CRIT) ; |
| #/sbin/linuxconf -> $(SEC_CRIT) ; |
| #/sbin/linuxconf-auth -> $(SEC_CRIT) ; |
| /sbin/pam_tally -> $(SEC_CRIT) ; |
| /sbin/pwdb_chkpwd -> $(SEC_CRIT) ; |
| #/sbin/remadmin -> $(SEC_CRIT) ; |
| /sbin/rescuept -> $(SEC_CRIT) ; |
| /sbin/rmt -> $(SEC_CRIT) ; |
| /sbin/rpc.lockd -> $(SEC_CRIT) ; |
| /sbin/rpc.statd -> $(SEC_CRIT) ; |
| /sbin/rpcdebug -> $(SEC_CRIT) ; |
| /sbin/service -> $(SEC_CRIT) ; |
| /sbin/setsysfont -> $(SEC_CRIT) ; |
| /sbin/shutdown -> $(SEC_CRIT) ; |
| /sbin/sulogin -> $(SEC_CRIT) ; |
| /sbin/swapon -> $(SEC_CRIT) ; |
| /sbin/syslogd -> $(SEC_CRIT) ; |
| /sbin/unix_chkpwd -> $(SEC_CRIT) ; |
| /bin/pwd -> $(SEC_CRIT) ; |
| /bin/uname -> $(SEC_CRIT) ; |
| } |
| |
| ######################################## |
| # ## |
| ######################################## # |
| # # # |
| # Hardware and Device Control Programs # # |
| # ## |
| ######################################## |
| ( |
| rulename = "Hardware and Device Control Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /bin/setserial -> $(SEC_CRIT) ; |
| /bin/sfxload -> $(SEC_CRIT) ; |
| /sbin/blockdev -> $(SEC_CRIT) ; |
| /sbin/cardctl -> $(SEC_CRIT) ; |
| /sbin/cardmgr -> $(SEC_CRIT) ; |
| /sbin/cbq -> $(SEC_CRIT) ; |
| /sbin/dump_cis -> $(SEC_CRIT) ; |
| /sbin/elvtune -> $(SEC_CRIT) ; |
| /sbin/hotplug -> $(SEC_CRIT) ; |
| /sbin/hwclock -> $(SEC_CRIT) ; |
| /sbin/ide_info -> $(SEC_CRIT) ; |
| #/sbin/isapnp -> $(SEC_CRIT) ; |
| /sbin/kbdrate -> $(SEC_CRIT) ; |
| /sbin/losetup -> $(SEC_CRIT) ; |
| /sbin/lspci -> $(SEC_CRIT) ; |
| /sbin/lspnp -> $(SEC_CRIT) ; |
| /sbin/mii-tool -> $(SEC_CRIT) ; |
| /sbin/pack_cis -> $(SEC_CRIT) ; |
| #/sbin/pnpdump -> $(SEC_CRIT) ; |
| /sbin/probe -> $(SEC_CRIT) ; |
| /sbin/pump -> $(SEC_CRIT) ; |
| /sbin/setpci -> $(SEC_CRIT) ; |
| /sbin/shapecfg -> $(SEC_CRIT) ; |
| } |
| |
| ############################### |
| # ## |
| ############################### # |
| # # # |
| # System Information Programs # # |
| # ## |
| ############################### |
| ( |
| rulename = "System Information Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /sbin/consoletype -> $(SEC_CRIT) ; |
| /sbin/kernelversion -> $(SEC_CRIT) ; |
| /sbin/runlevel -> $(SEC_CRIT) ; |
| } |
| |
| #################################### |
| # ## |
| #################################### # |
| # # # |
| # Application Information Programs # # |
| # ## |
| #################################### |
| |
| ( |
| rulename = "Application Information Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /sbin/genksyms -> $(SEC_CRIT) ; |
| #/sbin/genksyms.old -> $(SEC_CRIT) ; |
| /sbin/rtmon -> $(SEC_CRIT) ; |
| } |
| |
| ########################## |
| # ## |
| ########################## # |
| # # # |
| # Shell Related Programs # # |
| # ## |
| ########################## |
| ( |
| rulename = "Shell Related Programs", |
| severity = $(SIG_HI) |
| ) |
| { |
| /sbin/getkey -> $(SEC_CRIT) ; |
| /sbin/nash -> $(SEC_CRIT) ; |
| /sbin/sash -> $(SEC_CRIT) ; |
| } |
| |
| |
| ################ |
| # ## |
| ################ # |
| # # # |
| # OS Utilities # # |
| # ## |
| ################ |
| ( |
| rulename = "Operating System Utilities", |
| severity = $(SIG_HI) |
| ) |
| { |
| /bin/arch -> $(SEC_CRIT) ; |
| /bin/ash -> $(SEC_CRIT) ; |
| /bin/ash.static -> $(SEC_CRIT) ; |
| /bin/aumix-minimal -> $(SEC_CRIT) ; |
| /bin/basename -> $(SEC_CRIT) ; |
| /bin/cat -> $(SEC_CRIT) ; |
| /bin/consolechars -> $(SEC_CRIT) ; |
| /bin/cut -> $(SEC_CRIT) ; |
| /bin/date -> $(SEC_CRIT) ; |
| /bin/dd -> $(SEC_CRIT) ; |
| /bin/df -> $(SEC_CRIT) ; |
| /bin/dmesg -> $(SEC_CRIT) ; |
| /bin/doexec -> $(SEC_CRIT) ; |
| /bin/echo -> $(SEC_CRIT) ; |
| /bin/ed -> $(SEC_CRIT) ; |
| /bin/egrep -> $(SEC_CRIT) ; |
| /bin/false -> $(SEC_CRIT) ; |
| /bin/fgrep -> $(SEC_CRIT) ; |
| /bin/gawk -> $(SEC_CRIT) ; |
| /bin/gawk-3.1.0 -> $(SEC_CRIT) ; |
| /bin/gettext -> $(SEC_CRIT) ; |
| /bin/grep -> $(SEC_CRIT) ; |
| /bin/gunzip -> $(SEC_CRIT) ; |
| /bin/gzip -> $(SEC_CRIT) ; |
| /bin/hostname -> $(SEC_CRIT) ; |
| /bin/igawk -> $(SEC_CRIT) ; |
| /bin/ipcalc -> $(SEC_CRIT) ; |
| /bin/kill -> $(SEC_CRIT) ; |
| /bin/ln -> $(SEC_CRIT) ; |
| /bin/loadkeys -> $(SEC_CRIT) ; |
| /bin/login -> $(SEC_CRIT) ; |
| /bin/ls -> $(SEC_CRIT) ; |
| /bin/mail -> $(SEC_CRIT) ; |
| /bin/more -> $(SEC_CRIT) ; |
| /bin/mt -> $(SEC_CRIT) ; |
| /bin/mv -> $(SEC_CRIT) ; |
| /bin/netstat -> $(SEC_CRIT) ; |
| /bin/nice -> $(SEC_CRIT) ; |
| /bin/pgawk -> $(SEC_CRIT) ; |
| /bin/ps -> $(SEC_CRIT) ; |
| /bin/rpm -> $(SEC_CRIT) ; |
| /bin/sed -> $(SEC_CRIT) ; |
| /bin/sleep -> $(SEC_CRIT) ; |
| /bin/sort -> $(SEC_CRIT) ; |
| /bin/stty -> $(SEC_CRIT) ; |
| /bin/su -> $(SEC_CRIT) ; |
| /bin/sync -> $(SEC_CRIT) ; |
| /bin/tar -> $(SEC_CRIT) ; |
| /bin/true -> $(SEC_CRIT) ; |
| /bin/usleep -> $(SEC_CRIT) ; |
| /bin/vi -> $(SEC_CRIT) ; |
| /bin/zcat -> $(SEC_CRIT) ; |
| /bin/zsh -> $(SEC_CRIT) ; |
| #/bin/zsh-4.0.2 -> $(SEC_CRIT) ; |
| /sbin/sln -> $(SEC_CRIT) ; |
| /usr/bin/vimtutor -> $(SEC_CRIT) ; |
| } |
| |
| ############################## |
| # ## |
| ############################## # |
| # # # |
| # Critical Utility Sym-Links # # |
| # ## |
| ############################## |
| ( |
| rulename = "Critical Utility Sym-Links", |
| severity = $(SIG_HI) |
| ) |
| { |
| #/sbin/askrunlevel -> $(SEC_CRIT) ; |
| /sbin/clock -> $(SEC_CRIT) ; |
| #/sbin/fixperm -> $(SEC_CRIT) ; |
| /sbin/fsck.reiserfs -> $(SEC_CRIT) ; |
| #/sbin/fsconf -> $(SEC_CRIT) ; |
| /sbin/ipfwadm-wrapper -> $(SEC_CRIT) ; |
| /sbin/kallsyms -> $(SEC_CRIT) ; |
| /sbin/ksyms -> $(SEC_CRIT) ; |
| /sbin/lsmod -> $(SEC_CRIT) ; |
| #/sbin/mailconf -> $(SEC_CRIT) ; |
| /sbin/mkfs.reiserfs -> $(SEC_CRIT) ; |
| #/sbin/modemconf -> $(SEC_CRIT) ; |
| /sbin/modprobe -> $(SEC_CRIT) ; |
| /sbin/mount.ncp -> $(SEC_CRIT) ; |
| /sbin/mount.ncpfs -> $(SEC_CRIT) ; |
| /sbin/mount.smb -> $(SEC_CRIT) ; |
| /sbin/mount.smbfs -> $(SEC_CRIT) ; |
| #/sbin/netconf -> $(SEC_CRIT) ; |
| /sbin/pidof -> $(SEC_CRIT) ; |
| /sbin/poweroff -> $(SEC_CRIT) ; |
| /sbin/quotaoff -> $(SEC_CRIT) ; |
| /sbin/raid0run -> $(SEC_CRIT) ; |
| /sbin/raidhotadd -> $(SEC_CRIT) ; |
| /sbin/raidhotgenerateerror -> $(SEC_CRIT) ; |
| /sbin/raidhotremove -> $(SEC_CRIT) ; |
| /sbin/raidstop -> $(SEC_CRIT) ; |
| /sbin/rdump -> $(SEC_CRIT) ; |
| /sbin/rdump.static -> $(SEC_CRIT) ; |
| /sbin/reboot -> $(SEC_CRIT) ; |
| /sbin/rmmod -> $(SEC_CRIT) ; |
| /sbin/rrestore -> $(SEC_CRIT) ; |
| /sbin/rrestore.static -> $(SEC_CRIT) ; |
| /sbin/swapoff -> $(SEC_CRIT) ; |
| /sbin/telinit -> $(SEC_CRIT) ; |
| #/sbin/userconf -> $(SEC_CRIT) ; |
| #/sbin/uucpconf -> $(SEC_CRIT) ; |
| #/sbin/vregistry -> $(SEC_CRIT) ; |
| /bin/awk -> $(SEC_CRIT) ; |
| /bin/bash2 -> $(SEC_CRIT) ; |
| /bin/bsh -> $(SEC_CRIT) ; |
| /bin/csh -> $(SEC_CRIT) ; |
| /bin/dnsdomainname -> $(SEC_CRIT) ; |
| /bin/domainname -> $(SEC_CRIT) ; |
| /bin/ex -> $(SEC_CRIT) ; |
| /bin/gtar -> $(SEC_CRIT) ; |
| /bin/nisdomainname -> $(SEC_CRIT) ; |
| /bin/red -> $(SEC_CRIT) ; |
| /bin/rvi -> $(SEC_CRIT) ; |
| /bin/rview -> $(SEC_CRIT) ; |
| /bin/view -> $(SEC_CRIT) ; |
| /bin/ypdomainname -> $(SEC_CRIT) ; |
| } |
| |
| |
| ######################### |
| # ## |
| ######################### # |
| # # # |
| # Temporary directories # # |
| # ## |
| ######################### |
| ( |
| rulename = "Temporary directories", |
| recurse = false, |
| severity = $(SIG_LOW) |
| ) |
| { |
| /usr/tmp -> $(SEC_INVARIANT) ; |
| /var/tmp -> $(SEC_INVARIANT) ; |
| /tmp -> $(SEC_INVARIANT) ; |
| } |
| |
| ############### |
| # ## |
| ############### # |
| # # # |
| # Local files # # |
| # ## |
| ############### |
| ( |
| rulename = "User binaries", |
| severity = $(SIG_MED) |
| ) |
| { |
| /sbin -> $(SEC_BIN) (recurse = 1) ; |
| /usr/bin -> $(SEC_BIN) (recurse = 1) ; |
| /usr/sbin -> $(SEC_BIN) (recurse = 1) ; |
| /usr/local/bin -> $(SEC_BIN) (recurse = 1) ; |
| } |
| |
| ( |
| rulename = "Shell Binaries", |
| severity = $(SIG_HI) |
| ) |
| { |
| /bin/bash -> $(SEC_BIN) ; |
| /bin/ksh -> $(SEC_BIN) ; |
| # /bin/psh -> $(SEC_BIN) ; # No longer used? |
| # /bin/Rsh -> $(SEC_BIN) ; # No longer used? |
| /bin/sh -> $(SEC_BIN) ; |
| # /bin/shell -> $(SEC_SUID) ; # No longer used? |
| # /bin/tsh -> $(SEC_BIN) ; # No longer used? |
| /bin/tcsh -> $(SEC_BIN) ; |
| /sbin/nologin -> $(SEC_BIN) ; |
| } |
| |
| ( |
| rulename = "Security Control", |
| severity = $(SIG_HI) |
| ) |
| { |
| /etc/group -> $(SEC_CRIT) ; |
| /etc/security -> $(SEC_CRIT) ; |
| #/var/spool/cron/crontabs -> $(SEC_CRIT) ; # Uncomment when this file exists |
| } |
| |
| #( |
| # rulename = "Boot Scripts", |
| # severity = $(SIG_HI) |
| #) |
| #{ |
| # /etc/rc -> $(SEC_CONFIG) ; |
| # /etc/rc.bsdnet -> $(SEC_CONFIG) ; |
| # /etc/rc.dt -> $(SEC_CONFIG) ; |
| # /etc/rc.net -> $(SEC_CONFIG) ; |
| # /etc/rc.net.serial -> $(SEC_CONFIG) ; |
| # /etc/rc.nfs -> $(SEC_CONFIG) ; |
| # /etc/rc.powerfail -> $(SEC_CONFIG) ; |
| # /etc/rc.tcpip -> $(SEC_CONFIG) ; |
| # /etc/trcfmt.Z -> $(SEC_CONFIG) ; |
| #} |
| |
| ( |
| rulename = "Login Scripts", |
| severity = $(SIG_HI) |
| ) |
| { |
| /etc/bashrc -> $(SEC_CONFIG) ; |
| /etc/csh.cshrc -> $(SEC_CONFIG) ; |
| /etc/csh.login -> $(SEC_CONFIG) ; |
| /etc/inputrc -> $(SEC_CONFIG) ; |
| # /etc/tsh_profile -> $(SEC_CONFIG) ; #Uncomment when this file exists |
| /etc/profile -> $(SEC_CONFIG) ; |
| } |
| |
| # Libraries |
| ( |
| rulename = "Libraries", |
| severity = $(SIG_MED) |
| ) |
| { |
| /usr/lib -> $(SEC_BIN) ; |
| /usr/local/lib -> $(SEC_BIN) ; |
| } |
| |
| |
| ###################################################### |
| # ## |
| ###################################################### # |
| # # # |
| # Critical System Boot Files # # |
| # These files are critical to a correct system boot. # # |
| # ## |
| ###################################################### |
| |
| ( |
| rulename = "Critical system boot files", |
| severity = $(SIG_HI) |
| ) |
| { |
| /boot -> $(SEC_CRIT) ; |
| #/sbin/devfsd -> $(SEC_CRIT) ; |
| /sbin/grub -> $(SEC_CRIT) ; |
| /sbin/grub-install -> $(SEC_CRIT) ; |
| /sbin/grub-md5-crypt -> $(SEC_CRIT) ; |
| /sbin/installkernel -> $(SEC_CRIT) ; |
| /sbin/lilo -> $(SEC_CRIT) ; |
| /sbin/mkkerneldoth -> $(SEC_CRIT) ; |
| !/boot/System.map ; |
| !/boot/module-info ; |
| /usr/share/grub/i386-redhat/e2fs_stage1_5 -> $(SEC_CRIT) ; |
| /usr/share/grub/i386-redhat/fat_stage1_5 -> $(SEC_CRIT) ; |
| /usr/share/grub/i386-redhat/ffs_stage1_5 -> $(SEC_CRIT) ; |
| /usr/share/grub/i386-redhat/minix_stage1_5 -> $(SEC_CRIT) ; |
| /usr/share/grub/i386-redhat/reiserfs_stage1_5 -> $(SEC_CRIT) ; |
| /usr/share/grub/i386-redhat/stage1 -> $(SEC_CRIT) ; |
| /usr/share/grub/i386-redhat/stage2 -> $(SEC_CRIT) ; |
| /usr/share/grub/i386-redhat/vstafs_stage1_5 -> $(SEC_CRIT) ; |
| # other boot files may exist. Look for: |
| #/ufsboot -> $(SEC_CRIT) ; |
| } |
| ################################################## |
| ################################################### |
| # These files change every time the system boots ## |
| ################################################## |
| ( |
| rulename = "System boot changes", |
| severity = $(SIG_HI) |
| ) |
| { |
| !/var/run/ftp.pids-all ; # Comes and goes on reboot. |
| !/root/.enlightenment ; |
| /dev/log -> $(SEC_CONFIG) ; |
| /dev/cua0 -> $(SEC_CONFIG) ; |
| # /dev/printer -> $(SEC_CONFIG) ; # Uncomment if you have a printer device |
| /dev/console -> $(SEC_CONFIG) -u ; # User ID may change on console login/logout. |
| /dev/tty1 -> $(SEC_CONFIG) ; # tty devices |
| /dev/tty2 -> $(SEC_CONFIG) ; # tty devices |
| /dev/tty3 -> $(SEC_CONFIG) ; # are extremely |
| /dev/tty4 -> $(SEC_CONFIG) ; # variable |
| /dev/tty5 -> $(SEC_CONFIG) ; |
| /dev/tty6 -> $(SEC_CONFIG) ; |
| /dev/urandom -> $(SEC_CONFIG) ; |
| /dev/initctl -> $(SEC_CONFIG) ; |
| /var/lock/subsys -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/amd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/anacron -> $(SEC_CONFIG) ; |
| /var/lock/subsys/apmd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/arpwatch -> $(SEC_CONFIG) ; |
| /var/lock/subsys/atd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/autofs -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/bcm5820 -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/bgpd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/bootparamd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/canna -> $(SEC_CONFIG) ; |
| /var/lock/subsys/crond -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/cWnn -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/dhcpd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/firewall -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/freeWnn -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/gated -> $(SEC_CONFIG) ; |
| /var/lock/subsys/gpm -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/httpd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/identd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/innd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/ipchains -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/iptables -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ipvsadm -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/irda -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/iscsi -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/isdn -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/junkbuster -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/kadmin -> $(SEC_CONFIG) ; |
| /var/lock/subsys/keytable -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/kprop -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/krb524 -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/krb5kdc -> $(SEC_CONFIG) ; |
| /var/lock/subsys/kudzu -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/kWnn -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ldap -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/linuxconf -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/lpd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/mars_nwe -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/mcserv -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/mysqld -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/named -> $(SEC_CONFIG) ; |
| /var/lock/subsys/netfs -> $(SEC_CONFIG) ; |
| /var/lock/subsys/network -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/nfs -> $(SEC_CONFIG) ; |
| /var/lock/subsys/nfslock -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/nscd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ntpd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ospf6d -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ospfd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/pcmcia -> $(SEC_CONFIG) ; |
| /var/lock/subsys/portmap -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/postgresql -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/pxe -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/radvd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/random -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/rarpd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/reconfig -> $(SEC_CONFIG) ; |
| /var/lock/subsys/rhnsd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ripd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ripngd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/routed -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/rstatd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/rusersd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/rwalld -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/rwhod -> $(SEC_CONFIG) ; |
| /var/lock/subsys/sendmail -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/smb -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/snmpd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/squid -> $(SEC_CONFIG) ; |
| /var/lock/subsys/sshd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/syslog -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/tux -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/tWnn -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ups -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/vncserver -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/wine -> $(SEC_CONFIG) ; |
| /var/lock/subsys/xfs -> $(SEC_CONFIG) ; |
| /var/lock/subsys/xinetd -> $(SEC_CONFIG) ; |
| /var/lock/subsys/ypbind -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/yppasswdd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ypserv -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/ypxfrd -> $(SEC_CONFIG) ; |
| #/var/lock/subsys/zebra -> $(SEC_CONFIG) ; |
| /var/run -> $(SEC_CONFIG) ; |
| /var/log -> $(SEC_CONFIG) ; |
| /etc/ioctl.save -> $(SEC_CONFIG) ; |
| /etc/issue.net -> $(SEC_CONFIG) -i ; # Inode number changes |
| /etc/issue -> $(SEC_CONFIG) ; |
| /etc/mtab -> $(SEC_CONFIG) -i ; # Inode number changes on any mount/unmount |
| /lib/modules -> $(SEC_CONFIG) ; |
| /etc/.pwd.lock -> $(SEC_CONFIG) ; |
| # /lib/modules/preferred -> $(SEC_CONFIG) ; #Uncomment when this file exists |
| } |
| |
| # These files change the behavior of the root account |
| ( |
| rulename = "Root config files", |
| severity = 100 |
| ) |
| { |
| /root -> $(SEC_CRIT) ; # Catch all additions to /root |
| #/root/.Xresources -> $(SEC_CONFIG) ; |
| /root/.bashrc -> $(SEC_CONFIG) ; |
| /root/.bash_profile -> $(SEC_CONFIG) ; |
| /root/.bash_logout -> $(SEC_CONFIG) ; |
| /root/.cshrc -> $(SEC_CONFIG) ; |
| /root/.tcshrc -> $(SEC_CONFIG) ; |
| /root/Mail -> $(SEC_CONFIG) ; |
| #/root/mail -> $(SEC_CONFIG) ; |
| #/root/.amandahosts -> $(SEC_CONFIG) ; |
| #/root/.addressbook.lu -> $(SEC_CONFIG) ; |
| #/root/.addressbook -> $(SEC_CONFIG) ; |
| /root/.bash_history -> $(SEC_CONFIG) ; |
| /root/.elm -> $(SEC_CONFIG) ; |
| #/root/.esd_auth -> $(SEC_CONFIG) ; |
| /root/.gnome_private -> $(SEC_CONFIG) ; |
| /root/.gnome-desktop -> $(SEC_CONFIG) ; |
| /root/.gnome -> $(SEC_CONFIG) ; |
| /root/.ICEauthority -> $(SEC_CONFIG) ; |
| #/root/.mc -> $(SEC_CONFIG) ; |
| #/root/.pinerc -> $(SEC_CONFIG) ; |
| /root/.sawfish -> $(SEC_CONFIG) ; |
| /root/.Xauthority -> $(SEC_CONFIG) -i ; # Changes Inode number on login |
| #/root/.xauth -> $(SEC_CONFIG) ; |
| /root/.xsession-errors -> $(SEC_CONFIG) ; |
| } |
| |
| ################################ |
| # ## |
| ################################ # |
| # # # |
| # Critical configuration files # # |
| # ## |
| ################################ |
| ( |
| rulename = "Critical configuration files", |
| severity = $(SIG_HI) |
| ) |
| { |
| #/etc/conf.linuxconf -> $(SEC_BIN) ; |
| /etc/crontab -> $(SEC_BIN) ; |
| /etc/cron.hourly -> $(SEC_BIN) ; |
| /etc/cron.daily -> $(SEC_BIN) ; |
| /etc/cron.weekly -> $(SEC_BIN) ; |
| /etc/cron.monthly -> $(SEC_BIN) ; |
| /etc/default -> $(SEC_BIN) ; |
| /etc/fstab -> $(SEC_BIN) ; |
| /etc/exports -> $(SEC_BIN) ; |
| /etc/group- -> $(SEC_BIN) ; # changes should be infrequent |
| /etc/host.conf -> $(SEC_BIN) ; |
| /etc/hosts.allow -> $(SEC_BIN) ; |
| /etc/hosts.deny -> $(SEC_BIN) ; |
| /etc/httpd/conf -> $(SEC_BIN) ; # changes should be infrequent |
| /etc/protocols -> $(SEC_BIN) ; |
| /etc/services -> $(SEC_BIN) ; |
| /etc/rc.d/init.d -> $(SEC_BIN) ; |
| /etc/rc.d -> $(SEC_BIN) ; |
| /etc/mail.rc -> $(SEC_BIN) ; |
| /etc/modules.conf -> $(SEC_BIN) ; |
| /etc/motd -> $(SEC_BIN) ; |
| /etc/named.conf -> $(SEC_BIN) ; |
| /etc/passwd -> $(SEC_CONFIG) ; |
| /etc/passwd- -> $(SEC_CONFIG) ; |
| /etc/profile.d -> $(SEC_BIN) ; |
| /var/lib/nfs/rmtab -> $(SEC_BIN) ; |
| /usr/sbin/fixrmtab -> $(SEC_BIN) ; |
| /etc/rpc -> $(SEC_BIN) ; |
| /etc/sysconfig -> $(SEC_BIN) ; |
| /etc/samba/smb.conf -> $(SEC_CONFIG) ; |
| #/etc/gettydefs -> $(SEC_BIN) ; |
| /etc/nsswitch.conf -> $(SEC_BIN) ; |
| /etc/yp.conf -> $(SEC_BIN) ; |
| /etc/hosts -> $(SEC_CONFIG) ; |
| /etc/xinetd.conf -> $(SEC_CONFIG) ; |
| /etc/inittab -> $(SEC_CONFIG) ; |
| /etc/resolv.conf -> $(SEC_CONFIG) ; |
| /etc/syslog.conf -> $(SEC_CONFIG) ; |
| } |
| |
| #################### |
| # ## |
| #################### # |
| # # # |
| # Critical devices # # |
| # ## |
| #################### |
| ( |
| rulename = "Critical devices", |
| severity = $(SIG_HI), |
| recurse = false |
| ) |
| { |
| /dev/kmem -> $(Device) ; |
| /dev/mem -> $(Device) ; |
| /dev/null -> $(Device) ; |
| /dev/zero -> $(Device) ; |
| /proc/devices -> $(Device) ; |
| /proc/net -> $(Device) ; |
| /proc/sys -> $(Device) ; |
| /proc/cpuinfo -> $(Device) ; |
| /proc/modules -> $(Device) ; |
| /proc/mounts -> $(Device) ; |
| /proc/dma -> $(Device) ; |
| /proc/filesystems -> $(Device) ; |
| /proc/pci -> $(Device) ; |
| /proc/interrupts -> $(Device) ; |
| /proc/driver/rtc -> $(Device) ; |
| /proc/ioports -> $(Device) ; |
| #/proc/scsi -> $(Device) ; |
| /proc/kcore -> $(Device) ; |
| /proc/self -> $(Device) ; |
| /proc/kmsg -> $(Device) ; |
| /proc/stat -> $(Device) ; |
| /proc/ksyms -> $(Device) ; |
| /proc/loadavg -> $(Device) ; |
| /proc/uptime -> $(Device) ; |
| /proc/locks -> $(Device) ; |
| /proc/version -> $(Device) ; |
| /proc/mdstat -> $(Device) ; |
| /proc/meminfo -> $(Device) ; |
| /proc/cmdline -> $(Device) ; |
| /proc/misc -> $(Device) ; |
| } |
| |
| # Rest of critical system binaries |
| ( |
| rulename = "OS executables and libraries", |
| severity = $(SIG_HI) |
| ) |
| { |
| /bin -> $(SEC_BIN) ; |
| /lib -> $(SEC_BIN) ; |
| } |
| |
| #============================================================================= |
| # |
| # Copyright 2000 Tripwire, Inc. Tripwire is a registered trademark of Tripwire, |
| # Inc. in the United States and other countries. All rights reserved. |
| # |
| # Linux is a registered trademark of Linus Torvalds. |
| # |
| # UNIX is a registered trademark of The Open Group. |
| # |
| #============================================================================= |
| # |
| # Permission is granted to make and distribute verbatim copies of this document |
| # provided the copyright notice and this permission notice are preserved on all |
| # copies. |
| # |
| # Permission is granted to copy and distribute modified versions of this |
| # document under the conditions for verbatim copying, provided that the entire |
| # resulting derived work is distributed under the terms of a permission notice |
| # identical to this one. |
| # |
| # Permission is granted to copy and distribute translations of this document |
| # into another language, under the above conditions for modified versions, |
| # except that this permission notice may be stated in a translation approved by |
| # Tripwire, Inc. |
| # |
| # DCM |
| # |
| # $Id: twpol-GENERIC.txt,v 1.1 2003/06/08 02:00:06 pherman Exp $ |
| # |