| #!/bin/bash -e |
| # |
| |
| script_dir="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )" |
| obmc_dir=${script_dir}/../../ |
| |
| cd "$obmc_dir" |
| |
| # openbmc doesn't control what upstream poky, or any of the other layers do, |
| # which do use patches as part of their upstreaming process. |
| # meta-phosphor is also included such that patches that the community agrees to |
| # hold onto will be allowed in that layer. |
| |
| patch_files_tmp=$(mktemp) |
| allowed_patches_tmp=$(mktemp) |
| trap 'rm $patch_files_tmp $allowed_patches_tmp' exit |
| |
| git ls-files -- \ |
| '*.patch' \ |
| ':!:poky/**' \ |
| ':!:meta-arm/**' \ |
| ':!:meta-security/**' \ |
| ':!:meta-raspberrypi/**' \ |
| ':!:meta-openembedded/**' \ |
| ':!:meta-phosphor/**' \ |
| | sort > "$patch_files_tmp" |
| |
| |
| # The following patches were present on master at the time this test was |
| # written. Their presence in this list should not be acknowlegement that they |
| # are now allowed, but ignoring them is required in the intermediate time |
| # between when this test was created, and when the maintainers of these repos |
| # clean them up. |
| # |
| # https://github.com/openbmc/docs/blob/master/meta-layer-guidelines.md |
| echo "\ |
| meta-aspeed/recipes-bsp/u-boot/files/default-gcc.patch |
| meta-bytedance/meta-g220a/recipes-kernel/linux/linux-aspeed/0005-ARM-dts-aspeed-Enable-g220a-uart-route.patch |
| meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed-sdk/0001-board-aspeed-Add-Mux-for-yosemitev2.patch |
| meta-facebook/meta-yosemitev2/recipes-bsp/u-boot/u-boot-aspeed-sdk/0002-spl-host-console-handle.patch |
| meta-google/dynamic-layers/nuvoton-layer/recipes-bsp/images/npcm7xx-igps/0001-Set-FIU0_DRD_CFG-and-FIU_Clk_divider-for-gbmc-hoth.patch |
| meta-google/recipes-extended/libconfig/files/0001-conf2struct-Use-the-right-perl.patch |
| meta-google/recipes-extended/libconfig/files/0001-makefile-Add-missing-LDFLAGS.patch |
| meta-google/recipes-phosphor/initrdscripts/obmc-phosphor-initfs/rwfs-clean-dev.patch |
| meta-ingrasys/meta-zaius/recipes-bsp/u-boot/u-boot-aspeed/0001-board-aspeed-Add-reset_phy-for-Zaius.patch |
| meta-nuvoton/recipes-bsp/images/npcm7xx-igps/0001-Adjust-paths-for-use-with-Bitbake.patch |
| meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0001-Add-system-reset-status-support.patch |
| meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0002-config-ast-common-set-fieldmode-to-true.patch |
| meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0003-aspeed-add-gpio-support.patch |
| meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0004-aspeed-add-bmc-position-support.patch |
| meta-yadro/meta-nicole/recipes-kernel/linux/linux-aspeed/0001-Add-NCSI-channel-selector.patch |
| meta-yadro/meta-nicole/recipes-phosphor/host/op-proc-control/0001-Stop-and-send-SRESET-for-one-thread-only.patch |
| meta-yadro/recipes-phosphor/dbus/phosphor-dbus-interfaces/0001-Add-boot-initiator-mailbox-interface.patch |
| meta-yadro/recipes-phosphor/ipmi/phosphor-ipmi-host/0001-Add-support-for-persistent-only-settings.patch |
| meta-yadro/recipes-phosphor/ipmi/phosphor-ipmi-host/0002-Add-support-for-boot-initiator-mailbox.patch |
| meta-yadro/recipes-phosphor/ipmi/phosphor-ipmi-host/0003-Fix-version-parsing-update-AUX-revision-info.patch |
| " | sort > "$allowed_patches_tmp" |
| |
| files_diff=$(comm -23 "$patch_files_tmp" "$allowed_patches_tmp") |
| |
| files_count=$(echo -n "$files_diff" | grep -c '^' || true) |
| if [[ $files_count -ne 0 ]]; then |
| echo "Patch files found not in allow list" |
| echo "$files_diff" |
| echo "Patches are not allowed on OpenBMC in these layers. Please upstream your changes and see \ |
| https://github.com/openbmc/docs/blob/master/meta-layer-guidelines.md" |
| exit 1 |
| fi |
| |
| # Now verify there are no kernel dts files being added in a patch |
| # All dts files should be sent upstream and can be carried in the openbmc/linux |
| # tree until they are accepted upstream |
| dts_files_tmp=$(mktemp) |
| allowed_dts_tmp=$(mktemp) |
| trap 'rm $dts_files_tmp $allowed_dts_tmp' exit |
| |
| git ls-files -- \ |
| '*.dts' \ |
| ':!:poky/**' \ |
| ':!:meta-arm/**' \ |
| ':!:meta-security/**' \ |
| ':!:meta-raspberrypi/**' \ |
| ':!:meta-openembedded/**' \ |
| | sort > "$dts_files_tmp" |
| |
| # There is a single dts currently in the tree that we will exempt for now |
| echo "\ |
| meta-hpe/meta-dl360poc/recipes-kernel/linux/linux-obmc/gxp.dts |
| " | sort > "$allowed_dts_tmp" |
| |
| files_diff=$(comm -23 "$dts_files_tmp" "$allowed_dts_tmp") |
| |
| files_count=$(echo -n "$files_diff" | grep -c '^' || true) |
| if [[ $files_count -ne 0 ]]; then |
| echo "Dts files found not in allow list" |
| echo "$files_diff" |
| echo "Dts files are not allowed on OpenBMC in these layers. Please upstream your changes and see \ |
| https://github.com/openbmc/docs/blob/master/kernel-development.md" |
| exit 1 |
| fi |
| |
| lint_exempt="\ |
| meta-google/recipes-google/gpio/gpio-ctrl/lib.sh |
| meta-google/recipes-google/host-power-ctrl/gpio-host-pwr/host_isoff.sh |
| meta-google/recipes-google/host-power-ctrl/gpio-host-pwr/host_powercycle.sh |
| meta-google/recipes-google/host-power-ctrl/gpio-host-pwr/host_poweroff.sh |
| meta-google/recipes-google/host-power-ctrl/gpio-host-pwr/host_poweron.sh |
| meta-google/recipes-google/host-power-ctrl/gpio-host-pwr/host_reset.sh |
| meta-google/recipes-google/host-power-ctrl/gpio-host-pwr/lib.sh |
| meta-google/recipes-google/ipmi/ipmi-fru-sh/lib.sh |
| meta-google/recipes-google/ncsi/files/gbmc-ncsi-ip-from-ra.sh.in |
| meta-google/recipes-google/networking/files/gbmc-ip-monitor-test.sh |
| meta-google/recipes-google/networking/files/gbmc-ip-monitor.sh |
| meta-google/recipes-google/networking/files/gbmc-mac-config.sh.in |
| meta-google/recipes-google/networking/gbmc-bridge/gbmc-br-from-ra.sh |
| meta-google/recipes-google/networking/gbmc-bridge/gbmc-br-gw-src.sh |
| meta-google/recipes-google/networking/gbmc-bridge/gbmc-br-nft.sh |
| meta-google/recipes-google/networking/gbmc-bridge/gbmc-br-ula.sh |
| meta-google/recipes-google/networking/google-usb-network/usb_network.sh |
| meta-google/recipes-google/networking/google-usb-network/usb_network_test.sh |
| meta-google/recipes-google/networking/network-sh/lib.sh |
| meta-google/recipes-google/networking/network-sh/test.sh |
| meta-google/recipes-google/nftables/files/nft-configure.sh |
| meta-google/recipes-google/ssh/authorized-keys-comp/authorized-keys-comp.sh |
| meta-google/recipes-google/test/test-sh/test.sh |
| meta-google/recipes-phosphor/flash/google-key/verify-bmc-image.sh |
| meta-google/recipes-phosphor/flash/inplace-gbmc-update/inplace-gbmc-verify.sh |
| meta-ibm/meta-romulus/recipes-phosphor/chassis/vrm-control/vrm-control.sh |
| meta-ibm/recipes-phosphor/chassis/vrm-control/vrm-control.sh |
| meta-inventec/meta-transformers/recipes-phosphor/init/transformers-init/transformers-init.sh |
| meta-openpower/recipes-bsp/pdata/files/power-target.sh |
| meta-openpower/recipes-phosphor/network/first-boot-set-hostname/first-boot-set-hostname.sh |
| meta-openpower/recipes-phosphor/network/first-boot-set-mac/first-boot-set-mac.sh |
| meta-openpower/recipes-phosphor/occ/openpower-occ-control/occ-active.sh |
| meta-phosphor/recipes-support/nss-pam-ldapd/files/nslcd.init |
| meta-quanta/meta-common/recipes-quanta/network/usb-network/usb-network.sh |
| meta-quanta/meta-gbs/recipes-gbs/gbs-bios-update/files/bios-update.sh |
| meta-quanta/meta-gbs/recipes-gbs/gbs-bios-update/files/bios-verify.sh |
| meta-quanta/meta-gbs/recipes-gbs/gbs-bmc-update/files/bmc-verify.sh |
| meta-quanta/meta-gbs/recipes-gbs/gbs-detect-gpio-present/files/detect-gpio-present.sh |
| meta-quanta/meta-gbs/recipes-gbs/gbs-sysinit/files/gbs-sysinit.sh |
| meta-quanta/meta-gbs/recipes-gbs/hotswap-power-cycle/files/tray_powercycle.sh |
| meta-quanta/meta-gbs/recipes-google/acpi-power-state/acpi-power-state-daemon/gbs-check-host-state.sh |
| meta-quanta/meta-gbs/recipes-google/acpi-power-state/acpi-power-state-daemon/gbs-set-failsafe.sh |
| meta-quanta/meta-gbs/recipes-phosphor/fans/phosphor-pid-control/fan-table-init.sh |
| meta-quanta/meta-gbs/recipes-phosphor/sensors/phosphor-nvme/nvme_json_rewrite.sh |
| meta-quanta/meta-gsj/recipes-gsj/detect-fan-fail/files/detect-fan-fail.sh |
| meta-quanta/meta-gsj/recipes-gsj/gsj-hotswap-change-setting/files/gsj-hotswap-change-setting.sh |
| meta-quanta/meta-gsj/recipes-gsj/quanta-nvme-powerctrl/files/init_once.sh |
| meta-quanta/meta-gsj/recipes-gsj/quanta-nvme-powerctrl/files/nvme_powerctrl_library.sh |
| meta-quanta/meta-gsj/recipes-gsj/quanta-nvme-powerctrl/files/nvme_powermanager.sh |
| meta-quanta/meta-gsj/recipes-gsj/usb-network/files/usb_network.sh |
| meta-quanta/meta-gsj/recipes-phosphor/fans/phosphor-pid-control/fan-control.sh |
| meta-quanta/meta-gsj/recipes-phosphor/fans/phosphor-pid-control/fan-default-speed.sh |
| meta-quanta/meta-olympus-nuvoton/recipes-olympus-nuvoton/power/first-boot-set-psu/first-boot-set-psu.sh |
| meta-quanta/meta-olympus-nuvoton/recipes-phosphor/fans/phosphor-pid-control/fan-full-speed.sh |
| meta-quanta/meta-q71l/recipes-phosphor/quanta-powerctrl/files/init_once.sh |
| meta-quanta/meta-q71l/recipes-phosphor/quanta-powerctrl/files/poweroff.sh |
| meta-quanta/meta-q71l/recipes-phosphor/quanta-powerctrl/files/poweron.sh |
| " |
| |
| types=(json shell) |
| # shellcheck disable=SC2034 |
| check_json="eslint --resolve-plugins-relative-to /usr/local/lib/node_modules" |
| # shellcheck disable=SC2034 |
| check_shell="shellcheck -x" |
| |
| for t in "${types[@]}"; do |
| check_cmd="check_${t}" |
| if ! which "${!check_cmd%% *}" > /dev/null 2>&1; then |
| eval "${check_cmd}=\"echo WARNING: Skipping $t due to missing command:\"" |
| echo "${!check_cmd}" |
| fi |
| done |
| |
| non_bbfiles=$(git ls-files -- \ |
| ':!:poky/**' \ |
| ':!:meta-arm/**' \ |
| ':!:meta-security/**' \ |
| ':!:meta-raspberrypi/**' \ |
| ':!:meta-openembedded/**' \ |
| | grep -v -e "\.patch$" -e "\.bb$" -e "\.bbappend$") |
| |
| for f in $non_bbfiles; do |
| unset file_type |
| file_info=$(file "$f") |
| case $file_info in |
| *shell\ script*) |
| file_type="shell" |
| ;; |
| |
| *JSON\ data*) |
| file_type="json" |
| ;; |
| |
| *) |
| case $f in |
| *.sh) |
| file_type="shell" |
| ;; |
| |
| *.json) |
| file_type="json" |
| ;; |
| esac |
| esac |
| |
| if [ -n "$file_type" ]; then |
| check_cmd="check_${file_type}" |
| if ! eval "${!check_cmd} $f"; then |
| if [[ $lint_exempt == *$f* ]]; then |
| echo "EXEMPT: $f" |
| else |
| echo "FAILED: $f" |
| false |
| fi |
| fi |
| fi |
| |
| done |
| |
| echo "Repo test passed" |