meta-security/recipes-scanners/clamav/files/freshclam-native.conf - mdmillerii/openbmc - Gitiles

 # Path to the database directory.
 # WARNING: It must match clamd.conf's directive!
 # Default: hardcoded (depends on installation options)
 #DatabaseDirectory /var/lib/clamav

 # Path to the log file (make sure it has proper permissions)
 # Default: disabled
 #UpdateLogFile /var/log/clamav/freshclam.log

 # Maximum size of the log file.
 # Value of 0 disables the limit.
 # You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
 # and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
 # in bytes just don't use modifiers. If LogFileMaxSize is enabled,
 # log rotation (the LogRotate option) will always be enabled.
 # Default: 1M
 LogFileMaxSize 2M

 # Log time with each message.
 # Default: no
 LogTime yes

 # Enable verbose logging.
 # Default: no
 #LogVerbose yes

 # Use system logger (can work together with UpdateLogFile).
 # Default: no
 #LogSyslog yes

 # Specify the type of syslog messages - please refer to 'man syslog'
 # for facility names.
 # Default: LOG_LOCAL6
 #LogFacility LOG_MAIL

 # Enable log rotation. Always enabled when LogFileMaxSize is enabled.
 # Default: no
 #LogRotate yes

 # This option allows you to save the process identifier of the daemon
 # Default: disabled
 #PidFile /var/run/freshclam.pid

 # By default when started freshclam drops privileges and switches to the
 # "clamav" user. This directive allows you to change the database owner.
 # Default: clamav (may depend on installation options)
 DatabaseOwner clamav

 # Initialize supplementary group access (freshclam must be started by root).
 # Default: no
 #AllowSupplementaryGroups yes

 # Use DNS to verify virus database version. Freshclam uses DNS TXT records
 # to verify database and software versions. With this directive you can change
 # the database verification domain.
 # WARNING: Do not touch it unless you're configuring freshclam to use your
 # own database verification domain.
 # Default: current.cvd.clamav.net
 #DNSDatabaseInfo current.cvd.clamav.net

 # Uncomment the following line and replace XY with your country
 # code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
 # You can use db.XY.ipv6.clamav.net for IPv6 connections.
 #DatabaseMirror db.XY.clamav.net

 # database.clamav.net is a round-robin record which points to our most
 # reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
 # not working. DO NOT TOUCH the following line unless you know what you
 # are doing.
 DatabaseMirror database.clamav.net

 # How many attempts to make before giving up.
 # Default: 3 (per mirror)
 #MaxAttempts 5

 # With this option you can control scripted updates. It's highly recommended
 # to keep it enabled.
 # Default: yes
 #ScriptedUpdates yes

 # By default freshclam will keep the local databases (.cld) uncompressed to
 # make their handling faster. With this option you can enable the compression;
 # the change will take effect with the next database update.
 # Default: no
 #CompressLocalDatabase no

 # With this option you can provide custom sources (http:// or file://) for
 # database files. This option can be used multiple times.
 # Default: no custom URLs
 #DatabaseCustomURL http://myserver.com/mysigs.ndb
 #DatabaseCustomURL file:///mnt/nfs/local.hdb

 # This option allows you to easily point freshclam to private mirrors.
 # If PrivateMirror is set, freshclam does not attempt to use DNS
 # to determine whether its databases are out-of-date, instead it will
 # use the If-Modified-Since request or directly check the headers of the
 # remote database files. For each database, freshclam first attempts
 # to download the CLD file. If that fails, it tries to download the
 # CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo
 # and ScriptedUpdates. It can be used multiple times to provide
 # fall-back mirrors.
 # Default: disabled
 #PrivateMirror mirror1.mynetwork.com
 #PrivateMirror mirror2.mynetwork.com

 # Number of database checks per day.
 # Default: 12 (every two hours)
 #Checks 24

 # Proxy settings
 # Default: disabled
 #HTTPProxyServer myproxy.com
 #HTTPProxyPort 1234
 #HTTPProxyUsername myusername
 #HTTPProxyPassword mypass

 # If your servers are behind a firewall/proxy which applies User-Agent
 # filtering you can use this option to force the use of a different
 # User-Agent header.
 # Default: clamav/version_number
 #HTTPUserAgent SomeUserAgentIdString

 # Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
 # multi-homed systems.
 # Default: Use OS'es default outgoing IP address.
 #LocalIPAddress aaa.bbb.ccc.ddd

 # Send the RELOAD command to clamd.
 # Default: no
 #NotifyClamd /path/to/clamd.conf

 # Run command after successful database update.
 # Default: disabled
 #OnUpdateExecute command

 # Run command when database update process fails.
 # Default: disabled
 #OnErrorExecute command

 # Run command when freshclam reports outdated version.
 # In the command string %v will be replaced by the new version number.
 # Default: disabled
 #OnOutdatedExecute command

 # Don't fork into background.
 # Default: no
 #Foreground yes

 # Enable debug messages in libclamav.
 # Default: no
 #Debug yes

 # Timeout in seconds when connecting to database server.
 # Default: 30
 #ConnectTimeout 60

 # Timeout in seconds when reading from database server.
 # Default: 30
 #ReceiveTimeout 60

 # With this option enabled, freshclam will attempt to load new
 # databases into memory to make sure they are properly handled
 # by libclamav before replacing the old ones.
 # Default: yes
 #TestDatabases yes

 # When enabled freshclam will submit statistics to the ClamAV Project about
 # the latest virus detections in your environment. The ClamAV maintainers
 # will then use this data to determine what types of malware are the most
 # detected in the field and in what geographic area they are.
 # Freshclam will connect to clamd in order to get recent statistics.
 # Default: no
 #SubmitDetectionStats /path/to/clamd.conf

 # Country of origin of malware/detection statistics (for statistical
 # purposes only). The statistics collector at ClamAV.net will look up
 # your IP address to determine the geographical origin of the malware
 # reported by your installation. If this installation is mainly used to
 # scan data which comes from a different location, please enable this
 # option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
 # of the country of origin.
 # Default: disabled
 #DetectionStatsCountry country-code

 # This option enables support for our "Personal Statistics" service.
 # When this option is enabled, the information on malware detected by
 # your clamd installation is made available to you through our website.
 # To get your HostID, log on http://www.stats.clamav.net and add a new
 # host to your host list. Once you have the HostID, uncomment this option
 # and paste the HostID here. As soon as your freshclam starts submitting
 # information to our stats collecting service, you will be able to view
 # the statistics of this clamd installation by logging into
 # http://www.stats.clamav.net with the same credentials you used to
 # generate the HostID. For more information refer to:
 # http://www.clamav.net/documentation.html#cctts
 # This feature requires SubmitDetectionStats to be enabled.
 # Default: disabled
 #DetectionStatsHostID unique-id

 # This option enables support for Google Safe Browsing. When activated for
 # the first time, freshclam will download a new database file (safebrowsing.cvd)
 # which will be automatically loaded by clamd and clamscan during the next
 # reload, provided that the heuristic phishing detection is turned on. This
 # database includes information about websites that may be phishing sites or
 # possible sources of malware. When using this option, it's mandatory to run
 # freshclam at least every 30 minutes.
 # Freshclam uses the ClamAV's mirror infrastructure to distribute the
 # database and its updates but all the contents are provided under Google's
 # terms of use. See http://www.google.com/transparencyreport/safebrowsing
 # and http://www.clamav.net/documentation.html#safebrowsing
 # for more information.
 # Default: disabled
 #SafeBrowsing yes

 # This option enables downloading of bytecode.cvd, which includes additional
 # detection mechanisms and improvements to the ClamAV engine.
 # Default: enabled
 #Bytecode yes

 # Download an additional 3rd party signature database distributed through
 # the ClamAV mirrors.
 # This option can be used multiple times.
 #ExtraDatabase dbname1
 #ExtraDatabase dbname2
	# Path to the database directory.
	# WARNING: It must match clamd.conf's directive!
	# Default: hardcoded (depends on installation options)
	#DatabaseDirectory /var/lib/clamav

	# Path to the log file (make sure it has proper permissions)
	# Default: disabled
	#UpdateLogFile /var/log/clamav/freshclam.log

	# Maximum size of the log file.
	# Value of 0 disables the limit.
	# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
	# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
	# in bytes just don't use modifiers. If LogFileMaxSize is enabled,
	# log rotation (the LogRotate option) will always be enabled.
	# Default: 1M
	LogFileMaxSize 2M

	# Log time with each message.
	# Default: no
	LogTime yes

	# Enable verbose logging.
	# Default: no
	#LogVerbose yes

	# Use system logger (can work together with UpdateLogFile).
	# Default: no
	#LogSyslog yes

	# Specify the type of syslog messages - please refer to 'man syslog'
	# for facility names.
	# Default: LOG_LOCAL6
	#LogFacility LOG_MAIL

	# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
	# Default: no
	#LogRotate yes

	# This option allows you to save the process identifier of the daemon
	# Default: disabled
	#PidFile /var/run/freshclam.pid

	# By default when started freshclam drops privileges and switches to the
	# "clamav" user. This directive allows you to change the database owner.
	# Default: clamav (may depend on installation options)
	DatabaseOwner clamav

	# Initialize supplementary group access (freshclam must be started by root).
	# Default: no
	#AllowSupplementaryGroups yes

	# Use DNS to verify virus database version. Freshclam uses DNS TXT records
	# to verify database and software versions. With this directive you can change
	# the database verification domain.
	# WARNING: Do not touch it unless you're configuring freshclam to use your
	# own database verification domain.
	# Default: current.cvd.clamav.net
	#DNSDatabaseInfo current.cvd.clamav.net

	# Uncomment the following line and replace XY with your country
	# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
	# You can use db.XY.ipv6.clamav.net for IPv6 connections.
	#DatabaseMirror db.XY.clamav.net

	# database.clamav.net is a round-robin record which points to our most
	# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
	# not working. DO NOT TOUCH the following line unless you know what you
	# are doing.
	DatabaseMirror database.clamav.net

	# How many attempts to make before giving up.
	# Default: 3 (per mirror)
	#MaxAttempts 5

	# With this option you can control scripted updates. It's highly recommended
	# to keep it enabled.
	# Default: yes
	#ScriptedUpdates yes

	# By default freshclam will keep the local databases (.cld) uncompressed to
	# make their handling faster. With this option you can enable the compression;
	# the change will take effect with the next database update.
	# Default: no
	#CompressLocalDatabase no

	# With this option you can provide custom sources (http:// or file://) for
	# database files. This option can be used multiple times.
	# Default: no custom URLs
	#DatabaseCustomURL http://myserver.com/mysigs.ndb
	#DatabaseCustomURL file:///mnt/nfs/local.hdb

	# This option allows you to easily point freshclam to private mirrors.
	# If PrivateMirror is set, freshclam does not attempt to use DNS
	# to determine whether its databases are out-of-date, instead it will
	# use the If-Modified-Since request or directly check the headers of the
	# remote database files. For each database, freshclam first attempts
	# to download the CLD file. If that fails, it tries to download the
	# CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo
	# and ScriptedUpdates. It can be used multiple times to provide
	# fall-back mirrors.
	# Default: disabled
	#PrivateMirror mirror1.mynetwork.com
	#PrivateMirror mirror2.mynetwork.com

	# Number of database checks per day.
	# Default: 12 (every two hours)
	#Checks 24

	# Proxy settings
	# Default: disabled
	#HTTPProxyServer myproxy.com
	#HTTPProxyPort 1234
	#HTTPProxyUsername myusername
	#HTTPProxyPassword mypass

	# If your servers are behind a firewall/proxy which applies User-Agent
	# filtering you can use this option to force the use of a different
	# User-Agent header.
	# Default: clamav/version_number
	#HTTPUserAgent SomeUserAgentIdString

	# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
	# multi-homed systems.
	# Default: Use OS'es default outgoing IP address.
	#LocalIPAddress aaa.bbb.ccc.ddd

	# Send the RELOAD command to clamd.
	# Default: no
	#NotifyClamd /path/to/clamd.conf

	# Run command after successful database update.
	# Default: disabled
	#OnUpdateExecute command

	# Run command when database update process fails.
	# Default: disabled
	#OnErrorExecute command

	# Run command when freshclam reports outdated version.
	# In the command string %v will be replaced by the new version number.
	# Default: disabled
	#OnOutdatedExecute command

	# Don't fork into background.
	# Default: no
	#Foreground yes

	# Enable debug messages in libclamav.
	# Default: no
	#Debug yes

	# Timeout in seconds when connecting to database server.
	# Default: 30
	#ConnectTimeout 60

	# Timeout in seconds when reading from database server.
	# Default: 30
	#ReceiveTimeout 60

	# With this option enabled, freshclam will attempt to load new
	# databases into memory to make sure they are properly handled
	# by libclamav before replacing the old ones.
	# Default: yes
	#TestDatabases yes

	# When enabled freshclam will submit statistics to the ClamAV Project about
	# the latest virus detections in your environment. The ClamAV maintainers
	# will then use this data to determine what types of malware are the most
	# detected in the field and in what geographic area they are.
	# Freshclam will connect to clamd in order to get recent statistics.
	# Default: no
	#SubmitDetectionStats /path/to/clamd.conf

	# Country of origin of malware/detection statistics (for statistical
	# purposes only). The statistics collector at ClamAV.net will look up
	# your IP address to determine the geographical origin of the malware
	# reported by your installation. If this installation is mainly used to
	# scan data which comes from a different location, please enable this
	# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
	# of the country of origin.
	# Default: disabled
	#DetectionStatsCountry country-code

	# This option enables support for our "Personal Statistics" service.
	# When this option is enabled, the information on malware detected by
	# your clamd installation is made available to you through our website.
	# To get your HostID, log on http://www.stats.clamav.net and add a new
	# host to your host list. Once you have the HostID, uncomment this option
	# and paste the HostID here. As soon as your freshclam starts submitting
	# information to our stats collecting service, you will be able to view
	# the statistics of this clamd installation by logging into
	# http://www.stats.clamav.net with the same credentials you used to
	# generate the HostID. For more information refer to:
	# http://www.clamav.net/documentation.html#cctts
	# This feature requires SubmitDetectionStats to be enabled.
	# Default: disabled
	#DetectionStatsHostID unique-id

	# This option enables support for Google Safe Browsing. When activated for
	# the first time, freshclam will download a new database file (safebrowsing.cvd)
	# which will be automatically loaded by clamd and clamscan during the next
	# reload, provided that the heuristic phishing detection is turned on. This
	# database includes information about websites that may be phishing sites or
	# possible sources of malware. When using this option, it's mandatory to run
	# freshclam at least every 30 minutes.
	# Freshclam uses the ClamAV's mirror infrastructure to distribute the
	# database and its updates but all the contents are provided under Google's
	# terms of use. See http://www.google.com/transparencyreport/safebrowsing
	# and http://www.clamav.net/documentation.html#safebrowsing
	# for more information.
	# Default: disabled
	#SafeBrowsing yes

	# This option enables downloading of bytecode.cvd, which includes additional
	# detection mechanisms and improvements to the ClamAV engine.
	# Default: enabled
	#Bytecode yes

	# Download an additional 3rd party signature database distributed through
	# the ClamAV mirrors.
	# This option can be used multiple times.
	#ExtraDatabase dbname1
	#ExtraDatabase dbname2