poky/meta-poky/conf/local.conf.sample.extended - mdmillerii/openbmc - Gitiles

 # BBMASK contains regular expressions that can be used to tell BitBake to ignore
 # certain recipes.
 #BBMASK = ""

 #
 # Parallelism Options
 #
 # These two options control how much parallelism BitBake should use. The first
 # option determines how many tasks bitbake should run in parallel:
 #
 #BB_NUMBER_THREADS ?= "4"
 #
 # Default to setting automatically based on cpu count
 #BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}"
 #
 # The second option controls how many processes make should run in parallel when
 # running compile tasks:
 #
 #PARALLEL_MAKE ?= "-j 4"
 #
 # Default to setting automatically based on cpu count
 #PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
 #
 # For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
 # be appropriate for example.
 #
 # Some users are behind firewalls or use servers where the number of parallel connections
 # is limited. In such cases you can limit the number of fetch tasks which run in parallel by
 # setting the option below, in this case limiting to a maximum of 4 fetch tasks in parallel:
 #
 #do_fetch[number_threads] = "4"
 #

 # If you want to get an image based on directfb without x11 alter
 # DISTRO_FEATURES:
 DISTRO_FEATURES:append = " directfb"
 DISTRO_FEATURES:remove = "x11"

 # ENABLE_BINARY_LOCALE_GENERATION controls the generation of binary locale
 # packages at build time using qemu-native. Disabling it (by setting it to 0)
 # will save some build time at the expense of breaking i18n on devices with
 # less than 128MB RAM.
 #ENABLE_BINARY_LOCALE_GENERATION = "1"

 # If GLIBC_SPLIT_LC_PACKAGES is set to a non-zero value, convert
 # glibc-binary-localedata-XX-YY to be a meta package depending on
 # glibc-binary-localedata-XX-YY-lc-address and so on. This enables
 # saving quite some space if someone doesn't need LC_COLLATE for
 # example.
 #GLIBC_SPLIT_LC_PACKAGES = "1"

 # Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not
 # wish to perform the time-consuming step of generating all LIBC locales.
 # NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set
 # appropriate value for IMAGE_LINGUAS.
 # WARNING: this may break localisation!
 # WARNING: some recipes expect certain localizations to be enabled, e.g.
 # bash-ptest: fr-fr, de-de
 # glib-2.0-ptest: tr-tr, lt-lt, ja-jp.euc-jp, fa-ir, ru-ru, de-de, hr-hr, el-gr, fr-fr, es-es, en-gb
 # if you remove some of these and enable ptest, you'll get QA warning like:
 # ERROR: glib-2.0-1_2.58.0-r0 do_package_qa: QA Issue: glib-2.0-ptest rdepends on locale-base-de-de, but it isn't a build dependency? [build-deps]
 #GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8"
 #IMAGE_LINGUAS ?= "en-gb"

 # The following are used to control options related to debugging.
 #
 # Uncomment this to change the optimization to make debugging easer, at the
 # possible cost of performance.
 # DEBUG_BUILD = "1"
 #
 # Uncomment this to disable the stripping of the installed binaries
 # INHIBIT_PACKAGE_STRIP = "1"
 #
 # Uncomment this to disable the split of the debug information into -dbg files
 # INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
 #
 # When splitting debug information, the following controls the results of the
 # file splitting.
 #
 #  .debug (default):
 #    When splitting the debug information will be placed into
 #    a .debug directory in the same dirname of the binary produced:
 #      /bin/foo -> /bin/.debug/foo
 #
 #  debug-file-directory:
 #    When splitting the debug information will be placed into
 #    a central debug-file-directory, /usr/lib/debug:
 #      /bin/foo -> /usr/lib/debug/bin/foo.debug
 #
 #    Any source code referenced in the debug symbols will be copied
 #    and made available within the /usr/src/debug directory
 #
 #PACKAGE_DEBUG_SPLIT_STYLE = '.debug'
 # PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'

 # Uncomment these to build a package such that you can use gprof to profile it.
 # NOTE: Don't build glibc itself with these flags, or it'll fail to build.
 #
 # PROFILE_OPTIMIZATION = "-pg"
 # SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
 # LDFLAGS =+ "-pg"

 # TCMODE controls the characteristics of the generated packages/images by
 # telling poky which toolchain 'profile' to use.
 #
 # The default is "default" which uses the internal toolchain. With
 # additional layers, it is possible to set this to use a precompiled
 # external toolchain. One example is the Sourcery G++ Toolchain, support
 # for which is now in the separate meta-sourcery layer:
 #
 #  http://github.com/MentorEmbedded/meta-sourcery/
 #
 # meta-sourcery can be used as a template for adding support for other
 # external toolchains. See the link above for further details.
 #
 # TCMODE points the system to a file in conf/distro/include/tcmode-${TCMODE}.inc,
 # so for meta-sourcery which has conf/distro/include/tcmode-external-sourcery.inc
 # you would set it as follows:
 #
 # TCMODE ?= "external-sourcery"

 # This value is currently used by pseudo to determine if the recipe should
 # build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system.
 #
 # Pseudo will attempt to determine if a 32-bit wrapper is necessary, but
 # it doesn't always guess properly.  If you have 32-bit executables on
 # your 64-bit build system, you likely want to set this to "0",
 # otherwise you could end up with incorrect file attributes on the
 # target filesystem.
 #
 # Default is to not build 32 bit libs on 64 bit systems, uncomment this
 # if you need the 32 bits libs
 #NO32LIBS = "0"

 # Uncomment the following lines to enable multilib builds
 #require conf/multilib.conf
 #MULTILIBS = "multilib:lib32"
 #DEFAULTTUNE_virtclass-multilib-lib32 = "x86"

 # Set RPM_PREFER_ELF_ARCH to configure preferred ABI when using rpm packaging
 # backend to generate a rootfs, choices are:
 # 1: ELF32 wins
 # 2: ELF64 wins
 # 4: ELF64 N32 wins (for mips64 or mips64el only)
 #RPM_PREFER_ELF_ARCH ?= "2"

 # The network based PR service host and port
 # Uncomment the following lines to enable PRservice.
 # Set PRSERV_HOST to 'localhost:0' to automatically
 # start local PRService.
 # Set to other values to use remote PRService.
 #PRSERV_HOST = "localhost:0"

 # Additional image generation features
 #
 # The following is a list of classes to import to use in the generation of images
 # currently an example class is image_types_uboot
 # IMAGE_CLASSES = " image_types_uboot"

 # The following options will build a companion 'debug filesystem' in addition
 # to the normal deployable filesystem.  This companion system allows a
 # debugger to know the symbols and related sources.  It can be used to
 # debug a remote 'production' system without having to add the debug symbols
 # and sources to remote system.  If IMAGE_FSTYPES_DEBUGFS is not defined, it
 # defaults to IMAGE_FSTYPES.
 #IMAGE_GEN_DEBUGFS = "1"
 #IMAGE_FSTYPES_DEBUGFS = "tar.gz"

 # Incremental rpm image generation, the rootfs would be totally removed
 # and re-created in the second generation by default, but with
 # INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will
 # do update(remove/add some pkgs) on it.  NOTE: This is not suggested
 # when you want to create a productive rootfs
 #INC_RPM_IMAGE_GEN = "1"

 # This is a list of packages that require a commercial license to ship
 # product. If shipped as part of an image these packages may have
 # implications so they are disabled by default.  To enable them,
 # un-comment the below as appropriate.
 #LICENSE_FLAGS_WHITELIST = "commercial_gst-fluendo-mp3 \
 #                           commercial_gst-openmax \
 #                           commercial_gst-plugins-ugly \
 #                           commercial_lame \
 #                           commercial_libmad \
 #                           commercial_libomxil \
 #                           commercial_mpeg2dec \
 #                           commercial_qmmp"


 #
 # Disk space monitor, take action when the disk space or the amount of
 # inode is running low, it is enabled when BB_DISKMON_DIRS is set.
 #
 # Set the directory for the monitor, the format is:
 # "action,directory,minimum_space,minimum_free_inode"
 #
 # The "action" must be set and should be one of:
 # ABORT: Immediately abort
 # STOPTASKS: The new tasks can't be executed any more, will stop the build
 #           when the running tasks have been done.
 # WARN: show warnings (see BB_DISKMON_WARNINTERVAL for more information)
 #
 # The "directory" must be set, any directory is OK.
 #
 # Either "minimum_space" or "minimum_free_inode" (or both of them)
 # should be set, otherwise the monitor would not be enabled,
 # the unit can be G, M, K or none, but do NOT use GB, MB or KB
 # (B is not needed).
 #BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K"
 #
 # Set disk space and inode interval (only works when the action is "WARN",
 # the unit can be G, M, or K, but do NOT use the GB, MB or KB
 # (B is not needed), the format is:
 # "disk_space_interval,disk_inode_interval", the default value is
 # "50M,5K" which means that it would warn when the free space is
 # lower than the minimum space(or inode), and would repeat the warning
 # when the disk space reduces 50M (or the amount of inode reduces 5k).
 #BB_DISKMON_WARNINTERVAL = "50M,5K"

 # Archive the source and put them to ${DEPLOY_DIR}/sources/.
 #
 #INHERIT += "archiver"
 #
 # The tarball for the patched source will be created by default, and you
 # can configure the archiver as follow:
 #
 # Create archive for:
 # 1) original (or unpacked) source:
 #ARCHIVER_MODE[src] = "original"
 # 2) patched source: (default)
 #ARCHIVER_MODE[src] = "patched"
 # 3) configured source:
 #ARCHIVER_MODE[src] = "configured"
 #
 # 4) the patches between do_unpack and do_patch:
 #ARCHIVER_MODE[diff] = "1"
 # set the files that you'd like to exclude from the diff:
 #ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
 #
 # 5) the environment data, similar to 'bitbake -e recipe':
 #ARCHIVER_MODE[dumpdata] = "1"
 #
 # 6) the recipe (.bb and .inc):
 #ARCHIVER_MODE[recipe] = "1"
 #
 # 7) Whether output the .src.rpm package:
 #ARCHIVER_MODE[srpm] = "1"
 #
 # 8) Filter the license, the recipe whose license in
 #    COPYLEFT_LICENSE_INCLUDE will be included, and in
 #    COPYLEFT_LICENSE_EXCLUDE will be excluded.
 #COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*'
 #COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary'
 #
 # 9) Config the recipe type that will be archived, the type can be
 #    target, native, nativesdk, cross, crosssdk and cross-canadian,
 #    you can set one or more types. Archive all types by default.
 #COPYLEFT_RECIPE_TYPES = 'target'
 #

 #
 # GCC/LD FLAGS to enable more secure code generation
 #
 # By including the security_flags include file you enable flags
 # to the compiler and linker that cause them to generate more secure
 # code.
 # This does affect compile speed slightly.
 #
 # Use the following line to enable the security compiler and linker flags to your build
 #require conf/distro/include/security_flags.inc

 # Image level user/group configuration.
 # Inherit extrausers to make the setting of EXTRA_USERS_PARAMS effective.
 #IMAGE_CLASSES += "extrausers"
 # User / group settings
 # The settings are separated by the ; character.
 # Each setting is actually a command. The supported commands are useradd,
 # groupadd, userdel, groupdel, usermod and groupmod.
 #EXTRA_USERS_PARAMS = "\
 #    useradd -p '' tester; \
 #    groupadd developers; \
 #    userdel nobody; \
 #    groupdel video; \
 #    groupmod -g 1020 developers; \
 #    usermod -s /bin/sh tester; \
 #"

 # Various packages dynamically add users and groups to the system at package
 # install time.  For programs that do not care what the uid/gid is of the
 # resulting users/groups, the order of the install will determine the final
 # uid/gid.  This can lead to non-deterministic uid/gid values from one build
 # to another.  Use the following settings to specify that all user/group adds
 # should be created based on a static passwd/group file.
 #
 # Note, if you enable or disable the useradd-staticids in a configured system,
 # the TMPDIR may contain incorrect uid/gid values.  Clearing the TMPDIR
 # will correct this condition.
 #
 # By default the system looks in the BBPATH for files/passwd and files/group
 # the default can be overridden by specifying USERADD_UID/GID_TABLES.
 #
 #USERADDEXTENSION = "useradd-staticids"
 #USERADD_UID_TABLES = "files/passwd"
 #USERADD_GID_TABLES = "files/group"
 #
 # In order to prevent generating a system where a dynamicly assigned uid/gid
 # can exist, you should enable the following setting.  This will force the
 # system to error out if the user/group name is not defined in the
 # files/passwd or files/group (or specified replacements.)
 #USERADD_ERROR_DYNAMIC = "1"

 # Enabling FORTRAN
 # Note this is not officially supported and is just illustrated here to
 # show an example of how it can be done
 # You'll also need your fortran recipe to depend on libgfortran
 #FORTRAN_forcevariable = ",fortran"

 #
 # Kernel image features
 #
 # The INITRAMFS_IMAGE image variable will cause an additional recipe to
 # be built as a dependency to the what ever rootfs recipe you might be
 # using such as core-image-sato.  The initramfs might be needed for
 # the initial boot of the target system such as to load kernel
 # modules prior to mounting the root file system.
 #
 # INITRAMFS_IMAGE_BUNDLE variable controls if the image recipe
 # specified by the INITRAMFS_IMAGE will be run through an extra pass
 # through the kernel compilation in order to build a single binary
 # which contains both the kernel image and the initramfs.  The
 # combined binary will be deposited into the tmp/deploy directory.
 # NOTE: You can set INITRAMFS_IMAGE in an image recipe, but
 #       INITRAMFS_IMAGE_BUNDLE can only be set in a conf file.
 #
 #INITRAMFS_IMAGE = "core-image-minimal-initramfs"
 #INITRAMFS_IMAGE_BUNDLE = "1"

 #
 # IPK Hierarchical feed
 #
 # In some cases it may be desirable not to have all package files in the same
 # directory. An example would be when package feeds are to be uploaded to a
 # shared webhosting service or transferred to a Windows machine which may have
 # problems with directories containing multiple thousands of files.
 #
 # If the IPK_HIERARCHICAL_FEED variable is set to "1", packages will be split
 # between subdirectories in a similar way to how Debian package feeds are
 # organised. In the hierarchical feed, package files are written to
 # <outdir>/<arch>/<pkg_prefix>/<pkg_subdir>, where pkg_prefix is the first
 # letter of the package file name for non-lib packages or "lib" plus the 4th
 # letter of the package file name for lib packages (eg, 'l' for less, 'libc' for
 # libc6).  pkg_subdir is the root of the package file name, discarding the
 # version and architecture parts and the common suffixes '-dbg', '-dev', '-doc',
 # '-staticdev', '-locale' and '-locale-*' which are listed in
 # meta/conf/bitbake.conf.
 #
 # If IPK_HIERARCHICAL_FEED is unset or set to any other value, the traditional
 # feed layout is used where package files are placed in <outdir>/<arch>/.
 #
 #IPK_HIERARCHICAL_FEED = "1"
 #

 #
 # System initialization
 #
 #INIT_MANAGER = "none"
 #INIT_MANAGER = "sysvinit"
 #INIT_MANAGER = "systemd"
 #INIT_MANAGER = "mdev-busybox"

 #
 # Use a full set of packages instead of busybox for base utils
 #
 #PREFERRED_PROVIDER_base-utils = "packagegroup-core-base-utils"
 #VIRTUAL-RUNTIME_base-utils = "packagegroup-core-base-utils"
 #VIRTUAL-RUNTIME_base-utils-hwclock = "util-linux-hwclock"
 #VIRTUAL-RUNTIME_base-utils-syslog = "syslog"

 #
 # Enable LTO system-wide
 #
 #require conf/distro/include/lto.inc
 #DISTRO_FEATURES:append = " lto"

 #
 # Set PS1 for SDK
 #
 #SDK_PS1 ?= "${SDK_NAME}${SDK_VENDOR}:\$ "
	# BBMASK contains regular expressions that can be used to tell BitBake to ignore
	# certain recipes.
	#BBMASK = ""

	#
	# Parallelism Options
	#
	# These two options control how much parallelism BitBake should use. The first
	# option determines how many tasks bitbake should run in parallel:
	#
	#BB_NUMBER_THREADS ?= "4"
	#
	# Default to setting automatically based on cpu count
	#BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}"
	#
	# The second option controls how many processes make should run in parallel when
	# running compile tasks:
	#
	#PARALLEL_MAKE ?= "-j 4"
	#
	# Default to setting automatically based on cpu count
	#PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
	#
	# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
	# be appropriate for example.
	#
	# Some users are behind firewalls or use servers where the number of parallel connections
	# is limited. In such cases you can limit the number of fetch tasks which run in parallel by
	# setting the option below, in this case limiting to a maximum of 4 fetch tasks in parallel:
	#
	#do_fetch[number_threads] = "4"
	#

	# If you want to get an image based on directfb without x11 alter
	# DISTRO_FEATURES:
	DISTRO_FEATURES:append = " directfb"
	DISTRO_FEATURES:remove = "x11"

	# ENABLE_BINARY_LOCALE_GENERATION controls the generation of binary locale
	# packages at build time using qemu-native. Disabling it (by setting it to 0)
	# will save some build time at the expense of breaking i18n on devices with
	# less than 128MB RAM.
	#ENABLE_BINARY_LOCALE_GENERATION = "1"

	# If GLIBC_SPLIT_LC_PACKAGES is set to a non-zero value, convert
	# glibc-binary-localedata-XX-YY to be a meta package depending on
	# glibc-binary-localedata-XX-YY-lc-address and so on. This enables
	# saving quite some space if someone doesn't need LC_COLLATE for
	# example.
	#GLIBC_SPLIT_LC_PACKAGES = "1"

	# Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not
	# wish to perform the time-consuming step of generating all LIBC locales.
	# NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set
	# appropriate value for IMAGE_LINGUAS.
	# WARNING: this may break localisation!
	# WARNING: some recipes expect certain localizations to be enabled, e.g.
	# bash-ptest: fr-fr, de-de
	# glib-2.0-ptest: tr-tr, lt-lt, ja-jp.euc-jp, fa-ir, ru-ru, de-de, hr-hr, el-gr, fr-fr, es-es, en-gb
	# if you remove some of these and enable ptest, you'll get QA warning like:
	# ERROR: glib-2.0-1_2.58.0-r0 do_package_qa: QA Issue: glib-2.0-ptest rdepends on locale-base-de-de, but it isn't a build dependency? [build-deps]
	#GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8"
	#IMAGE_LINGUAS ?= "en-gb"

	# The following are used to control options related to debugging.
	#
	# Uncomment this to change the optimization to make debugging easer, at the
	# possible cost of performance.
	# DEBUG_BUILD = "1"
	#
	# Uncomment this to disable the stripping of the installed binaries
	# INHIBIT_PACKAGE_STRIP = "1"
	#
	# Uncomment this to disable the split of the debug information into -dbg files
	# INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
	#
	# When splitting debug information, the following controls the results of the
	# file splitting.
	#
	# .debug (default):
	# When splitting the debug information will be placed into
	# a .debug directory in the same dirname of the binary produced:
	# /bin/foo -> /bin/.debug/foo
	#
	# debug-file-directory:
	# When splitting the debug information will be placed into
	# a central debug-file-directory, /usr/lib/debug:
	# /bin/foo -> /usr/lib/debug/bin/foo.debug
	#
	# Any source code referenced in the debug symbols will be copied
	# and made available within the /usr/src/debug directory
	#
	#PACKAGE_DEBUG_SPLIT_STYLE = '.debug'
	# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'

	# Uncomment these to build a package such that you can use gprof to profile it.
	# NOTE: Don't build glibc itself with these flags, or it'll fail to build.
	#
	# PROFILE_OPTIMIZATION = "-pg"
	# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
	# LDFLAGS =+ "-pg"

	# TCMODE controls the characteristics of the generated packages/images by
	# telling poky which toolchain 'profile' to use.
	#
	# The default is "default" which uses the internal toolchain. With
	# additional layers, it is possible to set this to use a precompiled
	# external toolchain. One example is the Sourcery G++ Toolchain, support
	# for which is now in the separate meta-sourcery layer:
	#
	# http://github.com/MentorEmbedded/meta-sourcery/
	#
	# meta-sourcery can be used as a template for adding support for other
	# external toolchains. See the link above for further details.
	#
	# TCMODE points the system to a file in conf/distro/include/tcmode-${TCMODE}.inc,
	# so for meta-sourcery which has conf/distro/include/tcmode-external-sourcery.inc
	# you would set it as follows:
	#
	# TCMODE ?= "external-sourcery"

	# This value is currently used by pseudo to determine if the recipe should
	# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system.
	#
	# Pseudo will attempt to determine if a 32-bit wrapper is necessary, but
	# it doesn't always guess properly. If you have 32-bit executables on
	# your 64-bit build system, you likely want to set this to "0",
	# otherwise you could end up with incorrect file attributes on the
	# target filesystem.
	#
	# Default is to not build 32 bit libs on 64 bit systems, uncomment this
	# if you need the 32 bits libs
	#NO32LIBS = "0"

	# Uncomment the following lines to enable multilib builds
	#require conf/multilib.conf
	#MULTILIBS = "multilib:lib32"
	#DEFAULTTUNE_virtclass-multilib-lib32 = "x86"

	# Set RPM_PREFER_ELF_ARCH to configure preferred ABI when using rpm packaging
	# backend to generate a rootfs, choices are:
	# 1: ELF32 wins
	# 2: ELF64 wins
	# 4: ELF64 N32 wins (for mips64 or mips64el only)
	#RPM_PREFER_ELF_ARCH ?= "2"

	# The network based PR service host and port
	# Uncomment the following lines to enable PRservice.
	# Set PRSERV_HOST to 'localhost:0' to automatically
	# start local PRService.
	# Set to other values to use remote PRService.
	#PRSERV_HOST = "localhost:0"

	# Additional image generation features
	#
	# The following is a list of classes to import to use in the generation of images
	# currently an example class is image_types_uboot
	# IMAGE_CLASSES = " image_types_uboot"

	# The following options will build a companion 'debug filesystem' in addition
	# to the normal deployable filesystem. This companion system allows a
	# debugger to know the symbols and related sources. It can be used to
	# debug a remote 'production' system without having to add the debug symbols
	# and sources to remote system. If IMAGE_FSTYPES_DEBUGFS is not defined, it
	# defaults to IMAGE_FSTYPES.
	#IMAGE_GEN_DEBUGFS = "1"
	#IMAGE_FSTYPES_DEBUGFS = "tar.gz"

	# Incremental rpm image generation, the rootfs would be totally removed
	# and re-created in the second generation by default, but with
	# INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will
	# do update(remove/add some pkgs) on it. NOTE: This is not suggested
	# when you want to create a productive rootfs
	#INC_RPM_IMAGE_GEN = "1"

	# This is a list of packages that require a commercial license to ship
	# product. If shipped as part of an image these packages may have
	# implications so they are disabled by default. To enable them,
	# un-comment the below as appropriate.
	#LICENSE_FLAGS_WHITELIST = "commercial_gst-fluendo-mp3 \
	# commercial_gst-openmax \
	# commercial_gst-plugins-ugly \
	# commercial_lame \
	# commercial_libmad \
	# commercial_libomxil \
	# commercial_mpeg2dec \
	# commercial_qmmp"


	#
	# Disk space monitor, take action when the disk space or the amount of
	# inode is running low, it is enabled when BB_DISKMON_DIRS is set.
	#
	# Set the directory for the monitor, the format is:
	# "action,directory,minimum_space,minimum_free_inode"
	#
	# The "action" must be set and should be one of:
	# ABORT: Immediately abort
	# STOPTASKS: The new tasks can't be executed any more, will stop the build
	# when the running tasks have been done.
	# WARN: show warnings (see BB_DISKMON_WARNINTERVAL for more information)
	#
	# The "directory" must be set, any directory is OK.
	#
	# Either "minimum_space" or "minimum_free_inode" (or both of them)
	# should be set, otherwise the monitor would not be enabled,
	# the unit can be G, M, K or none, but do NOT use GB, MB or KB
	# (B is not needed).
	#BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K"
	#
	# Set disk space and inode interval (only works when the action is "WARN",
	# the unit can be G, M, or K, but do NOT use the GB, MB or KB
	# (B is not needed), the format is:
	# "disk_space_interval,disk_inode_interval", the default value is
	# "50M,5K" which means that it would warn when the free space is
	# lower than the minimum space(or inode), and would repeat the warning
	# when the disk space reduces 50M (or the amount of inode reduces 5k).
	#BB_DISKMON_WARNINTERVAL = "50M,5K"

	# Archive the source and put them to ${DEPLOY_DIR}/sources/.
	#
	#INHERIT += "archiver"
	#
	# The tarball for the patched source will be created by default, and you
	# can configure the archiver as follow:
	#
	# Create archive for:
	# 1) original (or unpacked) source:
	#ARCHIVER_MODE[src] = "original"
	# 2) patched source: (default)
	#ARCHIVER_MODE[src] = "patched"
	# 3) configured source:
	#ARCHIVER_MODE[src] = "configured"
	#
	# 4) the patches between do_unpack and do_patch:
	#ARCHIVER_MODE[diff] = "1"
	# set the files that you'd like to exclude from the diff:
	#ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
	#
	# 5) the environment data, similar to 'bitbake -e recipe':
	#ARCHIVER_MODE[dumpdata] = "1"
	#
	# 6) the recipe (.bb and .inc):
	#ARCHIVER_MODE[recipe] = "1"
	#
	# 7) Whether output the .src.rpm package:
	#ARCHIVER_MODE[srpm] = "1"
	#
	# 8) Filter the license, the recipe whose license in
	# COPYLEFT_LICENSE_INCLUDE will be included, and in
	# COPYLEFT_LICENSE_EXCLUDE will be excluded.
	#COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*'
	#COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary'
	#
	# 9) Config the recipe type that will be archived, the type can be
	# target, native, nativesdk, cross, crosssdk and cross-canadian,
	# you can set one or more types. Archive all types by default.
	#COPYLEFT_RECIPE_TYPES = 'target'
	#

	#
	# GCC/LD FLAGS to enable more secure code generation
	#
	# By including the security_flags include file you enable flags
	# to the compiler and linker that cause them to generate more secure
	# code.
	# This does affect compile speed slightly.
	#
	# Use the following line to enable the security compiler and linker flags to your build
	#require conf/distro/include/security_flags.inc

	# Image level user/group configuration.
	# Inherit extrausers to make the setting of EXTRA_USERS_PARAMS effective.
	#IMAGE_CLASSES += "extrausers"
	# User / group settings
	# The settings are separated by the ; character.
	# Each setting is actually a command. The supported commands are useradd,
	# groupadd, userdel, groupdel, usermod and groupmod.
	#EXTRA_USERS_PARAMS = "\
	# useradd -p '' tester; \
	# groupadd developers; \
	# userdel nobody; \
	# groupdel video; \
	# groupmod -g 1020 developers; \
	# usermod -s /bin/sh tester; \
	#"

	# Various packages dynamically add users and groups to the system at package
	# install time. For programs that do not care what the uid/gid is of the
	# resulting users/groups, the order of the install will determine the final
	# uid/gid. This can lead to non-deterministic uid/gid values from one build
	# to another. Use the following settings to specify that all user/group adds
	# should be created based on a static passwd/group file.
	#
	# Note, if you enable or disable the useradd-staticids in a configured system,
	# the TMPDIR may contain incorrect uid/gid values. Clearing the TMPDIR
	# will correct this condition.
	#
	# By default the system looks in the BBPATH for files/passwd and files/group
	# the default can be overridden by specifying USERADD_UID/GID_TABLES.
	#
	#USERADDEXTENSION = "useradd-staticids"
	#USERADD_UID_TABLES = "files/passwd"
	#USERADD_GID_TABLES = "files/group"
	#
	# In order to prevent generating a system where a dynamicly assigned uid/gid
	# can exist, you should enable the following setting. This will force the
	# system to error out if the user/group name is not defined in the
	# files/passwd or files/group (or specified replacements.)
	#USERADD_ERROR_DYNAMIC = "1"

	# Enabling FORTRAN
	# Note this is not officially supported and is just illustrated here to
	# show an example of how it can be done
	# You'll also need your fortran recipe to depend on libgfortran
	#FORTRAN_forcevariable = ",fortran"

	#
	# Kernel image features
	#
	# The INITRAMFS_IMAGE image variable will cause an additional recipe to
	# be built as a dependency to the what ever rootfs recipe you might be
	# using such as core-image-sato. The initramfs might be needed for
	# the initial boot of the target system such as to load kernel
	# modules prior to mounting the root file system.
	#
	# INITRAMFS_IMAGE_BUNDLE variable controls if the image recipe
	# specified by the INITRAMFS_IMAGE will be run through an extra pass
	# through the kernel compilation in order to build a single binary
	# which contains both the kernel image and the initramfs. The
	# combined binary will be deposited into the tmp/deploy directory.
	# NOTE: You can set INITRAMFS_IMAGE in an image recipe, but
	# INITRAMFS_IMAGE_BUNDLE can only be set in a conf file.
	#
	#INITRAMFS_IMAGE = "core-image-minimal-initramfs"
	#INITRAMFS_IMAGE_BUNDLE = "1"

	#
	# IPK Hierarchical feed
	#
	# In some cases it may be desirable not to have all package files in the same
	# directory. An example would be when package feeds are to be uploaded to a
	# shared webhosting service or transferred to a Windows machine which may have
	# problems with directories containing multiple thousands of files.
	#
	# If the IPK_HIERARCHICAL_FEED variable is set to "1", packages will be split
	# between subdirectories in a similar way to how Debian package feeds are
	# organised. In the hierarchical feed, package files are written to
	# <outdir>/<arch>/<pkg_prefix>/<pkg_subdir>, where pkg_prefix is the first
	# letter of the package file name for non-lib packages or "lib" plus the 4th
	# letter of the package file name for lib packages (eg, 'l' for less, 'libc' for
	# libc6). pkg_subdir is the root of the package file name, discarding the
	# version and architecture parts and the common suffixes '-dbg', '-dev', '-doc',
	# '-staticdev', '-locale' and '-locale-*' which are listed in
	# meta/conf/bitbake.conf.
	#
	# If IPK_HIERARCHICAL_FEED is unset or set to any other value, the traditional
	# feed layout is used where package files are placed in <outdir>/<arch>/.
	#
	#IPK_HIERARCHICAL_FEED = "1"
	#

	#
	# System initialization
	#
	#INIT_MANAGER = "none"
	#INIT_MANAGER = "sysvinit"
	#INIT_MANAGER = "systemd"
	#INIT_MANAGER = "mdev-busybox"

	#
	# Use a full set of packages instead of busybox for base utils
	#
	#PREFERRED_PROVIDER_base-utils = "packagegroup-core-base-utils"
	#VIRTUAL-RUNTIME_base-utils = "packagegroup-core-base-utils"
	#VIRTUAL-RUNTIME_base-utils-hwclock = "util-linux-hwclock"
	#VIRTUAL-RUNTIME_base-utils-syslog = "syslog"

	#
	# Enable LTO system-wide
	#
	#require conf/distro/include/lto.inc
	#DISTRO_FEATURES:append = " lto"

	#
	# Set PS1 for SDK
	#
	#SDK_PS1 ?= "${SDK_NAME}${SDK_VENDOR}:\$ "