| package Bastille::API::FileContent; |
| use strict; |
| |
| use Bastille::API; |
| |
| require Exporter; |
| our @ISA = qw(Exporter); |
| our @EXPORT_OK = qw( |
| B_blank_file |
| B_insert_line_after |
| B_insert_line_before |
| B_insert_line |
| B_append_line |
| B_prepend_line |
| B_replace_line |
| B_replace_lines |
| B_replace_pattern |
| B_match_line |
| B_match_line_only |
| B_match_chunk |
| B_return_matched_lines |
| B_hash_comment_line |
| B_hash_uncomment_line |
| B_delete_line |
| B_chunk_replace |
| B_print |
| B_getValueFromFile |
| B_getValueFromString |
| |
| B_TODO |
| B_TODOFlags |
| ); |
| our @EXPORT = @EXPORT_OK; |
| |
| |
| |
| ########################################################################### |
| # &B_blank_file ($filename,$pattern) blanks the file $filename, unless the |
| # pattern $pattern is present in the file. This lets us completely redo |
| # a file, if it isn't the one we put in place on a previous run... |
| # |
| # B_blank_file respects $GLOBAL_LOGONLY and uses B_open_plus and B_close_plus |
| # so that it makes backups and only modifies files when we're not in "-v" |
| # mode... |
| # |
| # If the file does not exist, the function does nothing, and gives an error |
| # to the Error Log |
| # |
| ########################################################################### |
| |
| sub B_blank_file($$) { |
| |
| my ($filename,$pattern) = @_; |
| my $retval; |
| |
| # If this variable is true, we won't blank the file... |
| |
| my $found_pattern=0; |
| |
| if ($retval=&B_open_plus (*BLANK_NEW,*BLANK_OLD,$filename) ) { |
| |
| my @lines; |
| |
| while (my $line = <BLANK_OLD>) { |
| |
| push @lines,$line; |
| if ($line =~ $pattern) { |
| $found_pattern=1; |
| } |
| } |
| |
| # Only copy the old file if the new one didn't match. |
| if ($found_pattern) { |
| while ( my $line = shift @lines ) { |
| &B_print(*BLANK_NEW,$line); |
| } |
| } |
| else { |
| &B_log("ACTION","Blanked file $filename\n"); |
| } |
| &B_close_plus(*BLANK_NEW,*BLANK_OLD,$filename); |
| } |
| else { |
| &B_log("ERROR","Couldn't blank file $filename since we couldn't open it or its replacement\n"); |
| } |
| |
| return $retval; |
| |
| } |
| |
| ########################################################################### |
| # &B_insert_line_after ($filename,$pattern,$line_to_insert,$line_to_follow) |
| # modifies $filename, inserting $line_to_insert unless one or more lines |
| # in the file matches $pattern. The $line_to_insert will be placed |
| # immediately after $line_to_follow, if it exists. If said line does not |
| # exist, the line will not be inserted and this routine will return 0. |
| # |
| # B_insert_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| # Here's examples of where you might use this: |
| # |
| # You'd like to insert a line in Apache's configuration file, in a |
| # particular section. |
| # |
| ########################################################################### |
| |
| sub B_insert_line_after($$$$) { |
| |
| my ($filename,$pattern,$line_to_insert,$line_to_follow) = @_; |
| |
| my @lines; |
| my $found_pattern=0; |
| my $found_line_to_follow=0; |
| |
| my $retval=1; |
| |
| if ( &B_open_plus (*INSERT_NEW,*INSERT_OLD,$filename) ) { |
| |
| # Read through the file looking for a match both on the $pattern |
| # and the line we are supposed to be inserting after... |
| |
| my $ctr=1; |
| while (my $line=<INSERT_OLD>) { |
| push (@lines,$line); |
| if ($line =~ $pattern) { |
| $found_pattern=1; |
| } |
| if ( ($found_line_to_follow < 1) and ($line =~ $line_to_follow)) { |
| $found_line_to_follow=$ctr; |
| } |
| $ctr++; |
| } |
| |
| # Log an error if we never found the line we were to insert after |
| unless ($found_line_to_follow ) { |
| $retval=0; |
| &B_log("ERROR","Never found the line that we were supposed to insert after in $filename\n"); |
| } |
| |
| # Now print the file back out, inserting our line if we should... |
| |
| $ctr=1; |
| while (my $line = shift @lines) { |
| &B_print(*INSERT_NEW,$line); |
| if ( ($ctr == $found_line_to_follow) and ($found_pattern == 0) ) { |
| &B_print(*INSERT_NEW,$line_to_insert); |
| &B_log("ACTION","Inserted the following line in $filename:\n"); |
| &B_log("ACTION","$line_to_insert"); |
| } |
| $ctr++; |
| } |
| |
| &B_close_plus (*INSERT_NEW,*INSERT_OLD,$filename); |
| |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't insert line to $filename, since open failed."); |
| } |
| |
| return $retval; |
| |
| } |
| ########################################################################### |
| # &B_insert_line_before ($filename,$pattern,$line_to_insert,$line_to_preceed) |
| # modifies $filename, inserting $line_to_insert unless one or more lines |
| # in the file matches $pattern. The $line_to_insert will be placed |
| # immediately before $line_to_preceed, if it exists. If said line does not |
| # exist, the line will not be inserted and this routine will return 0. |
| # |
| # B_insert_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| # Here's examples of where you might use this: |
| # |
| # You'd like to insert a line in Apache's configuration file, in a |
| # particular section. |
| # |
| ########################################################################### |
| |
| sub B_insert_line_before($$$$) { |
| |
| my ($filename,$pattern,$line_to_insert,$line_to_preceed) = @_; |
| |
| my @lines; |
| my $found_pattern=0; |
| my $found_line_to_preceed=0; |
| |
| my $retval=1; |
| |
| if ( &B_open_plus (*INSERT_NEW,*INSERT_OLD,$filename) ) { |
| |
| # Read through the file looking for a match both on the $pattern |
| # and the line we are supposed to be inserting after... |
| |
| my $ctr=1; |
| while (my $line=<INSERT_OLD>) { |
| push (@lines,$line); |
| if ($line =~ $pattern) { |
| $found_pattern=1; |
| } |
| if ( ($found_line_to_preceed < 1) and ($line =~ $line_to_preceed)) { |
| $found_line_to_preceed=$ctr; |
| } |
| $ctr++; |
| } |
| |
| # Log an error if we never found the line we were to preceed |
| unless ($found_line_to_preceed ) { |
| $retval=0; |
| &B_log("ERROR","Never found the line that we were supposed to insert before in $filename\n"); |
| } |
| |
| # Now print the file back out, inserting our line if we should... |
| |
| $ctr=1; |
| while (my $line = shift @lines) { |
| if ( ($ctr == $found_line_to_preceed) and ($found_pattern == 0) ) { |
| &B_print(*INSERT_NEW,$line_to_insert); |
| &B_log("ACTION","Inserted the following line in $filename:\n"); |
| &B_log("ACTION","$line_to_insert"); |
| } |
| &B_print(*INSERT_NEW,$line); |
| $ctr++; |
| } |
| |
| &B_close_plus (*INSERT_NEW,*INSERT_OLD,$filename); |
| |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't insert line to $filename, since open failed."); |
| } |
| |
| return $retval; |
| |
| } |
| |
| ########################################################################### |
| # &B_insert_line ($filename,$pattern,$line_to_insert,$line_to_follow) |
| # |
| # has been renamed to B_insert_line_after() |
| # |
| # This name will continue to work, as a shim for code that has not been |
| # transitioned. |
| ########################################################################### |
| |
| sub B_insert_line($$$$) { |
| |
| my $rtn_value = &B_insert_line_after(@_); |
| |
| return ($rtn_value); |
| } |
| |
| |
| ########################################################################### |
| # &B_append_line ($filename,$pattern,$line_to_append) modifies $filename, |
| # appending $line_to_append unless one or more lines in the file matches |
| # $pattern. This is an enhancement to the append_line_if_no_such_line_exists |
| # idea. |
| # |
| # Additionally, if $pattern is set equal to "", the line is always appended. |
| # |
| # B_append_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| # Here's examples of where you might use this: |
| # |
| # You'd like to add a root line to /etc/ftpusers if none exists. |
| # You'd like to add a Options Indexes line to Apache's config. file, |
| # after you delete all Options lines from said config file. |
| # |
| ########################################################################### |
| |
| sub B_append_line($$$) { |
| |
| my ($filename,$pattern,$line_to_append) = @_; |
| |
| my $found_pattern=0; |
| my $retval=1; |
| |
| if ( &B_open_plus (*APPEND_NEW,*APPEND_OLD,$filename) ) { |
| while (my $line=<APPEND_OLD>) { |
| &B_print(*APPEND_NEW,$line); |
| if ($line =~ $pattern) { |
| $found_pattern=1; |
| } |
| } |
| # Changed != 0 to $pattern so that "" works instead of 0 and perl |
| # does not give the annoying |
| # Argument "XX" isn't numeric in ne at ... |
| if ( $pattern eq "" or ! $found_pattern ) { |
| &B_print(*APPEND_NEW,$line_to_append); |
| &B_log("ACTION","Appended the following line to $filename:\n"); |
| &B_log("ACTION","$line_to_append"); |
| } |
| &B_close_plus (*APPEND_NEW,*APPEND_OLD,$filename); |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","# Couldn't append line to $filename, since open failed."); |
| } |
| |
| return $retval; |
| |
| } |
| |
| ########################################################################### |
| # &B_prepend_line ($filename,$pattern,$line_to_prepend) modifies $filename, |
| # pre-pending $line_to_prepend unless one or more lines in the file matches |
| # $pattern. This is an enhancement to the prepend_line_if_no_such_line_exists |
| # idea. |
| # |
| # B_prepend_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| # Here's examples of where you might use this: |
| # |
| # You'd like to insert the line "auth required pam_deny.so" to the top |
| # of the PAM stack file /etc/pam.d/rsh to totally deactivate rsh. |
| # |
| ########################################################################### |
| |
| sub B_prepend_line($$$) { |
| |
| my ($filename,$pattern,$line_to_prepend) = @_; |
| |
| my @lines; |
| my $found_pattern=0; |
| my $retval=1; |
| |
| if ( &B_open_plus (*PREPEND_NEW,*PREPEND_OLD,$filename) ) { |
| while (my $line=<PREPEND_OLD>) { |
| push (@lines,$line); |
| if ($line =~ $pattern) { |
| $found_pattern=1; |
| } |
| } |
| unless ($found_pattern) { |
| &B_print(*PREPEND_NEW,$line_to_prepend); |
| } |
| while (my $line = shift @lines) { |
| &B_print(*PREPEND_NEW,$line); |
| } |
| |
| &B_close_plus (*PREPEND_NEW,*PREPEND_OLD,$filename); |
| |
| # Log the action |
| &B_log("ACTION","Pre-pended the following line to $filename:\n"); |
| &B_log("ACTION","$line_to_prepend"); |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't prepend line to $filename, since open failed.\n"); |
| } |
| |
| return $retval; |
| |
| } |
| |
| |
| ########################################################################### |
| # &B_replace_line ($filename,$pattern,$line_to_switch_in) modifies $filename, |
| # replacing any lines matching $pattern with $line_to_switch_in. |
| # |
| # It returns the number of lines it replaced (or would have replaced, if |
| # LOGONLY mode wasn't on...) |
| # |
| # B_replace_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| # Here an example of where you might use this: |
| # |
| # You'd like to replace any Options lines in Apache's config file with: |
| # Options Indexes FollowSymLinks |
| # |
| ########################################################################### |
| |
| sub B_replace_line($$$) { |
| |
| my ($filename,$pattern,$line_to_switch_in) = @_; |
| my $retval=0; |
| |
| if ( &B_open_plus (*REPLACE_NEW,*REPLACE_OLD,$filename) ) { |
| while (my $line=<REPLACE_OLD>) { |
| unless ($line =~ $pattern) { |
| &B_print(*REPLACE_NEW,$line); |
| } |
| else { |
| # Don't replace the line if it's already there. |
| unless ($line eq $line_to_switch_in) { |
| &B_print(*REPLACE_NEW,$line_to_switch_in); |
| |
| $retval++; |
| &B_log("ACTION","File modification in $filename -- replaced line\n" . |
| "$line\n" . |
| "with:\n" . |
| "$line_to_switch_in"); |
| } |
| # But if it is there, make sure it stays there! (by Paul Allen) |
| else { |
| &B_print(*REPLACE_NEW,$line); |
| } |
| } |
| } |
| &B_close_plus (*REPLACE_NEW,*REPLACE_OLD,$filename); |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't replace line(s) in $filename because open failed.\n"); |
| } |
| |
| return $retval; |
| } |
| |
| ########################################################################### |
| # &B_replace_lines ($filename,$patterns_and_substitutes) modifies $filename, |
| # replacing the line matching the nth $pattern specified in $patterns_and_substitutes->[n]->[0] |
| # with the corresponding substitutes in $patterns_and_substitutes->[n]->-[1] |
| # |
| # It returns the number of lines it replaced (or would have replaced, if |
| # LOGONLY mode wasn't on...) |
| # |
| # B_replace_lines uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| # Here an example of where you might use this: |
| # |
| # You'd like to replace /etc/opt/ssh/sshd_config file |
| # (^#|^)Protocol\s+(.*)\s*$ ==> Protocol 2 |
| # (^#|^)X11Forwarding\s+(.*)\s*$ ==> X11Forwarding yes |
| # (^#|^)IgnoreRhosts\s+(.*)\s*$ ==> gnoreRhosts yes |
| # (^#|^)RhostsAuthentication\s+(.*)\s*$ ==> RhostsAuthentication no |
| # (^#|^)RhostsRSAAuthentication\s+(.*)\s*$ ==> RhostsRSAAuthentication no |
| # (^#|^)PermitRootLogin\s+(.*)\s*$ ==> PermitRootLogin no |
| # (^#|^)PermitEmptyPasswords\s+(.*)\s*$ ==> PermitEmptyPasswords no |
| # my $patterns_and_substitutes = [ |
| # [ '(^#|^)Protocol\s+(.*)\s*$' => 'Protocol 2'], |
| # ['(^#|^)X11Forwarding\s+(.*)\s*$' => 'X11Forwarding yes'], |
| # ['(^#|^)IgnoreRhosts\s+(.*)\s*$' => 'gnoreRhosts yes'], |
| # ['(^#|^)RhostsAuthentication\s+(.*)\s*$' => 'RhostsAuthentication no'], |
| # ['(^#|^)RhostsRSAAuthentication\s+(.*)\s*$' => 'RhostsRSAAuthentication no'], |
| # ['(^#|^)PermitRootLogin\s+(.*)\s*$' => 'PermitRootLogin no'], |
| # ['(^#|^)PermitEmptyPasswords\s+(.*)\s*$' => 'PermitEmptyPasswords no'] |
| #] |
| # B_replaces_lines($sshd_config,$patterns_and_substitutes); |
| ########################################################################### |
| |
| sub B_replace_lines($$){ |
| my ($filename, $pairs) = @_; |
| my $retval = 0; |
| if ( &B_open_plus (*REPLACE_NEW,*REPLACE_OLD,$filename) ) { |
| while (my $line = <REPLACE_OLD>) { |
| my $switch; |
| my $switch_before = $line; |
| chomp($line); |
| foreach my $pair (@$pairs) { |
| $switch = 0; |
| |
| my $pattern = $pair->[0] ; |
| my $replace = $pair->[1]; |
| my $evalstr = '$line' . "=~ s/$pattern/$replace/"; |
| eval $evalstr; |
| if ($@) { |
| &B_log("ERROR", "eval $evalstr failed.\n"); |
| } |
| #if ( $line =~ s/$pair->[0]/$pair->[1]/) { |
| # $switch = 1; |
| # last; |
| #} |
| } |
| &B_print(*REPLACE_NEW,"$line\n"); |
| if ($switch) { |
| $retval++; |
| B_log("ACTION","File modification in $filename -- replaced line\n" . |
| "$switch_before\n" . |
| "with:\n" . |
| "$line\n"); |
| } |
| } |
| &B_close_plus (*REPLACE_NEW,*REPLACE_OLD,$filename); |
| return 1; |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't replace line(s) in $filename because open failed.\n"); |
| } |
| } |
| |
| ################################################################################################ |
| # &B_replace_pattern ($filename,$pattern,$pattern_to_remove,$text_to_switch_in) |
| # modifies $filename, acting on only lines that match $pattern, replacing a |
| # string that matches $pattern_to_remove with $text_to_switch_in. |
| # |
| # Ex: |
| # B_replace_pattern('/etc/httpd.conf','^\s*Options.*\bIncludes\b','Includes','IncludesNoExec') |
| # |
| # replaces all "Includes" with "IncludesNoExec" on Apache Options lines. |
| # |
| # It returns the number of lines it altered (or would have replaced, if |
| # LOGONLY mode wasn't on...) |
| # |
| # B_replace_pattern uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| ################################################################################################# |
| |
| sub B_replace_pattern($$$$) { |
| |
| my ($filename,$pattern,$pattern_to_remove,$text_to_switch_in) = @_; |
| my $retval=0; |
| |
| if ( &B_open_plus (*REPLACE_NEW,*REPLACE_OLD,$filename) ) { |
| while (my $line=<REPLACE_OLD>) { |
| unless ($line =~ $pattern) { |
| &B_print(*REPLACE_NEW,$line); |
| } |
| else { |
| my $orig_line =$line; |
| $line =~ s/$pattern_to_remove/$text_to_switch_in/; |
| |
| &B_print(*REPLACE_NEW,$line); |
| |
| $retval++; |
| &B_log("ACTION","File modification in $filename -- replaced line\n" . |
| "$orig_line\n" . |
| "via pattern with:\n" . |
| "$line\n\n"); |
| } |
| } |
| &B_close_plus (*REPLACE_NEW,*REPLACE_OLD,$filename); |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't pattern-replace line(s) in $filename because open failed.\n"); |
| } |
| |
| return $retval; |
| } |
| |
| |
| ########################################################################### |
| # &B_match_line($file,$pattern); |
| # |
| # This subroutine will return a 1 if the pattern specified can be matched |
| # against the file specified. It will return a 0 otherwise. |
| # |
| # return values: |
| # 0: pattern not in file or the file is not readable |
| # 1: pattern is in file |
| ########################################################################### |
| sub B_match_line($$) { |
| # file to be checked and pattern to check for. |
| my ($file,$pattern) = @_; |
| # if the file is readable then |
| if(-r $file) { |
| # if the file can be opened then |
| if(open FILE,"<$file") { |
| # look at each line in the file |
| while (my $line = <FILE>) { |
| # if a line matches the pattern provided then |
| if($line =~ $pattern) { |
| # return the pattern was found |
| B_log('DEBUG','Pattern: ' . $pattern . ' matched in file: ' . |
| $file . "\n"); |
| return 1; |
| } |
| } |
| } |
| # if the file cann't be opened then |
| else { |
| # send a note to that affect to the errorlog |
| &B_log("ERROR","Unable to open file for read.\n$file\n$!\n"); |
| } |
| } |
| B_log('DEBUG','Pattern: ' . $pattern . ' not matched in file: ' . |
| $file . "\n"); |
| # the provided pattern was not matched against a line in the file |
| return 0; |
| } |
| |
| ########################################################################### |
| # &B_match_line_only($file,$pattern); |
| # |
| # This subroutine checks if the specified pattern can be matched and if |
| # it's the only content in the file. The only content means it's only but |
| # may have several copies in the file. |
| # |
| # return values: |
| # 0: pattern not in file or pattern is not the only content |
| # or the file is not readable |
| # 1: pattern is in file and it's the only content |
| ############################################################################ |
| sub B_match_line_only($$) { |
| my ($file,$pattern) = @_; |
| |
| # if matched, set to 1 later |
| my $retval = 0; |
| |
| # if the file is readable then |
| if(-r $file) { |
| # if the file can be opened then |
| if(&B_open(*FILED, $file)) { |
| # pattern should be matched at least once |
| # pattern can not be mismatched |
| while (my $line = <FILED>) { |
| if ($line =~ $pattern) { |
| $retval = 1; |
| } |
| else { |
| &B_close(*FILED); |
| return 0; |
| } |
| } |
| } |
| &B_close(*FILED); |
| } |
| |
| return $retval; |
| } |
| |
| ########################################################################### |
| # &B_return_matched_lines($file,$pattern); |
| # |
| # This subroutine returns lines in a file matching a given regular |
| # expression, when called in the default list mode. When called in scalar |
| # mode, returns the number of elements found. |
| ########################################################################### |
| sub B_return_matched_lines($$) |
| { |
| my ($filename,$pattern) = @_; |
| my @lines = (); |
| |
| open(READFILE, $filename); |
| while (<READFILE>) { |
| chomp; |
| next unless /$pattern/; |
| push(@lines, $_); |
| } |
| if (wantarray) |
| { |
| return @lines; |
| } |
| else |
| { |
| return scalar (@lines); |
| } |
| } |
| |
| ########################################################################### |
| # &B_match_chunk($file,$pattern); |
| # |
| # This subroutine will return a 1 if the pattern specified can be matched |
| # against the file specified on a line-agnostic form. This allows for |
| # patterns which by necessity must match against a multi-line pattern. |
| # This is the natural analogue to B_replace_chunk, which was created to |
| # provide multi-line capability not provided by B_replace_line. |
| # |
| # return values: |
| # 0: pattern not in file or the file is not readable |
| # 1: pattern is in file |
| ########################################################################### |
| |
| sub B_match_chunk($$) { |
| |
| my ($file,$pattern) = @_; |
| my @lines; |
| my $big_long_line; |
| my $retval=1; |
| |
| open CHUNK_FILE,$file; |
| |
| # Read all lines into one scalar. |
| @lines = <CHUNK_FILE>; |
| close CHUNK_FILE; |
| |
| foreach my $line ( @lines ) { |
| $big_long_line .= $line; |
| } |
| |
| # Substitution routines get weird unless last line is terminated with \n |
| chomp $big_long_line; |
| $big_long_line .= "\n"; |
| |
| # Exit if we don't find a match |
| unless ($big_long_line =~ $pattern) { |
| $retval = 0; |
| } |
| |
| return $retval; |
| } |
| |
| ########################################################################### |
| # &B_hash_comment_line ($filename,$pattern) modifies $filename, replacing |
| # any lines matching $pattern with a "hash-commented" version, like this: |
| # |
| # |
| # finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd |
| # becomes: |
| # #finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd |
| # |
| # Also: |
| # tftp dgram udp wait root /usr/lbin/tftpd tftpd\ |
| # /opt/ignite\ |
| # /var/opt/ignite |
| # becomes: |
| # #tftp dgram udp wait root /usr/lbin/tftpd tftpd\ |
| # # /opt/ignite\ |
| # # /var/opt/ignite |
| # |
| # |
| # B_hash_comment_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| ########################################################################### |
| |
| sub B_hash_comment_line($$) { |
| |
| my ($filename,$pattern) = @_; |
| my $retval=1; |
| |
| if ( &B_open_plus (*HASH_NEW,*HASH_OLD,$filename) ) { |
| my $line; |
| while ($line=<HASH_OLD>) { |
| unless ( ($line =~ $pattern) and ($line !~ /^\s*\#/) ) { |
| &B_print(*HASH_NEW,$line); |
| } |
| else { |
| &B_print(*HASH_NEW,"#$line"); |
| &B_log("ACTION","File modification in $filename -- hash commented line\n" . |
| "$line\n" . |
| "like this:\n" . |
| "#$line\n\n"); |
| # while the line has a trailing \ then we should also comment out the line below |
| while($line =~ m/\\\n$/) { |
| if($line=<HASH_OLD>) { |
| &B_print(*HASH_NEW,"#$line"); |
| &B_log("ACTION","File modification in $filename -- hash commented line\n" . |
| "$line\n" . |
| "like this:\n" . |
| "#$line\n\n"); |
| } |
| else { |
| $line = ""; |
| } |
| } |
| |
| } |
| } |
| &B_close_plus (*HASH_NEW,*HASH_OLD,$filename); |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't hash-comment line(s) in $filename because open failed.\n"); |
| } |
| |
| return $retval; |
| } |
| |
| |
| ########################################################################### |
| # &B_hash_uncomment_line ($filename,$pattern) modifies $filename, |
| # removing any commenting from lines that match $pattern. |
| # |
| # #finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd |
| # becomes: |
| # finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd |
| # |
| # |
| # B_hash_uncomment_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| ########################################################################### |
| |
| sub B_hash_uncomment_line($$) { |
| |
| my ($filename,$pattern) = @_; |
| my $retval=1; |
| |
| if ( &B_open_plus (*HASH_NEW,*HASH_OLD,$filename) ) { |
| my $line; |
| while ($line=<HASH_OLD>) { |
| unless ( ($line =~ $pattern) and ($line =~ /^\s*\#/) ) { |
| &B_print(*HASH_NEW,$line); |
| } |
| else { |
| $line =~ /^\s*\#+(.*)$/; |
| $line = "$1\n"; |
| |
| &B_print(*HASH_NEW,"$line"); |
| &B_log("ACTION","File modification in $filename -- hash uncommented line\n"); |
| &B_log("ACTION",$line); |
| # while the line has a trailing \ then we should also uncomment out the line below |
| while($line =~ m/\\\n$/) { |
| if($line=<HASH_OLD>) { |
| $line =~ /^\s*\#+(.*)$/; |
| $line = "$1\n"; |
| &B_print(*HASH_NEW,"$line"); |
| &B_log("ACTION","File modification in $filename -- hash uncommented line\n"); |
| &B_log("ACTION","#$line"); |
| &B_log("ACTION","like this:\n"); |
| &B_log("ACTION","$line"); |
| } |
| else { |
| $line = ""; |
| } |
| } |
| } |
| } |
| &B_close_plus (*HASH_NEW,*HASH_OLD,$filename); |
| } |
| else { |
| $retval=0; |
| &B_log("ERROR","Couldn't hash-uncomment line(s) in $filename because open failed.\n"); |
| } |
| |
| return $retval; |
| } |
| |
| |
| |
| ########################################################################### |
| # &B_delete_line ($filename,$pattern) modifies $filename, deleting any |
| # lines matching $pattern. It uses B_replace_line to do this. |
| # |
| # B_replace_line uses B_open_plus and B_close_plus, so that the file |
| # modified is backed up... |
| # |
| # Here an example of where you might use this: |
| # |
| # You'd like to remove any timeout= lines in /etc/lilo.conf, so that your |
| # delay=1 modification will work. |
| |
| # |
| ########################################################################### |
| |
| |
| sub B_delete_line($$) { |
| |
| my ($filename,$pattern)=@_; |
| my $retval=&B_replace_line($filename,$pattern,""); |
| |
| return $retval; |
| } |
| |
| |
| ########################################################################### |
| # &B_chunk_replace ($file,$pattern,$replacement) reads $file replacing the |
| # first occurrence of $pattern with $replacement. |
| # |
| ########################################################################### |
| |
| sub B_chunk_replace($$$) { |
| |
| my ($file,$pattern,$replacement) = @_; |
| |
| my @lines; |
| my $big_long_line; |
| my $retval=1; |
| |
| &B_open (*OLDFILE,$file); |
| |
| # Read all lines into one scalar. |
| @lines = <OLDFILE>; |
| &B_close (*OLDFILE); |
| foreach my $line ( @lines ) { |
| $big_long_line .= $line; |
| } |
| |
| # Substitution routines get weird unless last line is terminated with \n |
| chomp $big_long_line; |
| $big_long_line .= "\n"; |
| |
| # Exit if we don't find a match |
| unless ($big_long_line =~ $pattern) { |
| return 0; |
| } |
| |
| $big_long_line =~ s/$pattern/$replacement/s; |
| |
| $retval=&B_open_plus (*NEWFILE,*OLDFILE,$file); |
| if ($retval) { |
| &B_print (*NEWFILE,$big_long_line); |
| &B_close_plus (*NEWFILE,*OLDFILE,$file); |
| } |
| |
| return $retval; |
| } |
| |
| ########################################################################### |
| # &B_print ($handle,@list) prints the items of @list to the file handle |
| # $handle. It logs the action and respects the $GLOBAL_LOGONLY variable. |
| # |
| ########################################################################### |
| |
| sub B_print { |
| my $handle=shift @_; |
| |
| my $result=1; |
| |
| unless ($GLOBAL_LOGONLY) { |
| $result=print $handle @_; |
| } |
| |
| ($handle) = "$handle" =~ /[^:]+::[^:]+::([^:]+)/; |
| |
| $result; |
| } |
| |
| |
| ########################################################################## |
| # &B_getValueFromFile($regex,$file); |
| # Takes a regex with a single group "()" and returns the unique value |
| # on any non-commented lines |
| # This (and B_return_matched_lines are only used in this file, though are |
| # probably more generally useful. For now, leaving these here serve the following |
| #functions: |
| # a) still gets exported/associated as part of the Test_API package, and |
| # is still availble for a couple operations that can't be deferred to the |
| # main test loop, as they save values so that individual tests don't have to |
| # recreate (copy / paste) the logic to get them. |
| # |
| # It also avoids the circular "use" if we incldued "use Test API" at the top |
| # of this file (Test API "uses" this file. |
| # Returns the uncommented, unique values of a param=value pair. |
| # |
| # Return values: |
| # 'Not Defined' if the value is not present or not uniquely defined. |
| # $value if the value is present and unique |
| # |
| ########################################################################### |
| sub B_getValueFromFile ($$){ |
| my $inputRegex=$_[0]; |
| my $file=$_[1]; |
| my ($lastvalue,$value)=''; |
| |
| my @lines=&B_return_matched_lines($file, $inputRegex); |
| |
| return &B_getValueFromString($inputRegex,join('/n',@lines)); |
| } |
| |
| ########################################################################## |
| # &B_getValueFromString($param,$string); |
| # Takes a regex with a single group "()" and returns the unique value |
| # on any non-commented lines |
| # This (and B_return_matched_lines are only used in this file, though are |
| # probably more generally useful. For now, leaving these here serve the following |
| #functions: |
| # a) still gets exported/associated as part of the Test_API package, and |
| # is still availble for a couple operations that can't be deferred to the |
| # main test loop, as they save values so that individual tests don't have to |
| # recreate (copy / paste) the logic to get them. |
| # |
| # It also avoids the circular "use" if we incldued "use Test API" at the top |
| # of this file (Test API "uses" this file. |
| # Returns the uncommented, unique values of a param=value pair. |
| # |
| # Return values: |
| # 'Not Unique' if the value is not uniquely defined. |
| # undef if the value isn't defined at all |
| # $value if the value is present and unique |
| # |
| ########################################################################### |
| sub B_getValueFromString ($$){ |
| my $inputRegex=$_[0]; |
| my $inputString=$_[1]; |
| my $lastValue=''; |
| my $value=''; |
| |
| my @lines=split(/\n/,$inputString); |
| |
| &B_log("DEBUG","B_getvaluefromstring called with regex: $inputRegex and input: " . |
| $inputString); |
| foreach my $line (grep(/$inputRegex/,@lines)) { |
| $line =~ /$inputRegex/; |
| $value=$1; |
| if (($lastValue eq '') and ($value ne '')) { |
| $lastValue = $value; |
| } elsif (($lastValue ne $value) and ($value ne '')) { |
| B_log("DEBUG","getvaluefromstring returned Not Unique"); |
| return 'Not Unique'; |
| } |
| } |
| if ((not(defined($value))) or ($value eq '')) { |
| &B_log("DEBUG","Could not find regex match in string"); |
| return undef; |
| } else { |
| &B_log("DEBUG","B_getValueFromString Found: $value ; using: $inputRegex"); |
| return $value; |
| } |
| } |
| |
| ############################################################### |
| # This function adds something to the To Do List. |
| # Arguments: |
| # 1) The string you want to add to the To Do List. |
| # 2) Optional: Question whose TODOFlag should be set to indicate |
| # A pending manual action in subsequent reports. Only skip this |
| # If there's no security-audit relevant action you need the user to |
| # accomplish |
| # Ex: |
| # &B_TODO("------\nInstalling IPFilter\n----\nGo get Ipfilter","IPFilter.install_ipfilter"); |
| # |
| # |
| # Returns: |
| # 0 - If error condition |
| # True, if sucess, specifically: |
| # "appended" if the append operation was successful |
| # "exists" if no change was made since the entry was already present |
| ############################################################### |
| sub B_TODO ($;$) { |
| my $text = $_[0]; |
| my $FlaggedQuestion = $_[1]; |
| my $multilineString = ""; |
| |
| # trim off any leading and trailing new lines, regexes separated for "clarity" |
| $text =~ s/^\n+(.*)/$1/; |
| $text =~ s/(.*)\n+$/$1/; |
| |
| if ( ! -e &getGlobal('BFILE',"TODO") ) { |
| # Make the TODO list file for HP-UX Distro |
| &B_create_file(&getGlobal('BFILE', "TODO")); |
| &B_append_line(&getGlobal('BFILE', "TODO"),'a$b', |
| "Please take the steps below to make your system more secure,\n". |
| "then delete the item from this file and record what you did along\n". |
| "with the date and time in your system administration log. You\n". |
| "will need that information in case you ever need to revert your\n". |
| "changes.\n\n"); |
| } |
| |
| |
| if (open(TODO,"<" . &getGlobal('BFILE', "TODO"))) { |
| while (my $line = <TODO>) { |
| # getting rid of all meta characters. |
| $line =~ s/(\\|\||\(|\)|\[|\]|\{|\}|\^|\$|\*|\+|\?|\.)//g; |
| $multilineString .= $line; |
| } |
| chomp $multilineString; |
| $multilineString .= "\n"; |
| |
| close(TODO); |
| } |
| else { |
| &B_log("ERROR","Unable to read TODO.txt file.\n" . |
| "The following text could not be appended to the TODO list:\n" . |
| $text . |
| "End of TODO text\n"); |
| return 0; #False |
| } |
| |
| my $textPattern = $text; |
| |
| # getting rid of all meta characters. |
| $textPattern =~ s/(\\|\||\(|\)|\[|\]|\{|\}|\^|\$|\*|\+|\?|\.)//g; |
| |
| if( $multilineString !~ "$textPattern") { |
| my $datestamp = "{" . localtime() . "}"; |
| unless ( &B_append_line(&getGlobal('BFILE', "TODO"), "", $datestamp . "\n" . $text . "\n\n\n") ) { |
| &B_log("ERROR","TODO Failed for text: " . $text ); |
| } |
| #Note that we only set the flag on the *initial* entry in the TODO File |
| #Not on subsequent detection. This is to avoid the case where Bastille |
| #complains on a subsequent Bastille run of an already-performed manual |
| #action that the user neglected to delete from the TODO file. |
| # It does, however lead to a report of "nonsecure" when the user |
| #asked for the TODO item, performed it, Bastille detected that and cleared the |
| # Item, and then the user unperformed the action. I think this is proper behavior. |
| # rwf 06/06 |
| |
| if (defined($FlaggedQuestion)) { |
| &B_TODOFlags("set",$FlaggedQuestion); |
| } |
| return "appended"; #evals to true, and also notes what happened |
| } else { |
| return "exists"; #evals to true, and also |
| } |
| |
| } |
| |
| |
| ##################################################################### |
| # &B_TODOFlags() |
| # |
| # This is the interface to the TODO flags. Test functions set these when they |
| # require a TODO item to be completed to get to a "secure" state. |
| # The prune/reporting function checks these to ensure no flags are set before |
| # reporting an item "secure" |
| # "Methods" are load | save | isSet <Question> | set <Question> | unset <Question> |
| # |
| ###################################################################### |
| |
| sub B_TODOFlags($;$) { |
| my $action = $_[0]; |
| my $module = $_[1]; |
| |
| use File::Spec; |
| |
| my $todo_flag = &getGlobal("BFILE","TODOFlag"); |
| |
| &B_log("DEBUG","B_TODOFlags action: $action , module: $module"); |
| |
| if ($action eq "load") { |
| if (-e $todo_flag ) { |
| &B_open(*TODO_FLAGS, $todo_flag); |
| my @lines = <TODO_FLAGS>; |
| foreach my $line (@lines) { |
| chomp($line); |
| $GLOBAL_CONFIG{"$line"}{"TODOFlag"}="yes"; |
| } |
| return (&B_close(*TODO_FLAGS)); #return success of final close |
| } else { |
| return 1; #No-op is okay |
| } |
| } elsif ($action eq "save") { |
| # Make sure the file exists, else create |
| #Note we use open_plus and and create file, so if Bastille is |
| #reverted, all the flags will self-clear (file deleted) |
| my $flagNumber = 0; |
| my $flagData = ''; |
| foreach my $key (keys %GLOBAL_CONFIG) { |
| if ($GLOBAL_CONFIG{$key}{"TODOFlag"} eq "yes") { |
| ++$flagNumber; |
| $flagData .= "$key\n"; |
| } |
| } |
| if (not( -e $todo_flag)) { |
| &B_log("DEBUG","Initializing TODO Flag file: $todo_flag"); |
| &B_create_file($todo_flag); # Make sure it exists |
| } |
| &B_blank_file($todo_flag, |
| "This will not appear in the file; ensures blanking"); |
| return &B_append_line($todo_flag, "", "$flagData"); #return success of save |
| } elsif (($action eq "isSet") and ($module ne "")) { |
| if ($GLOBAL_CONFIG{"$module"}{"TODOFlag"} eq "yes") { |
| return 1; #TRUE |
| } else { |
| return 0; #FALSE |
| } |
| } elsif (($action eq "set") and ($module ne "")) { |
| $GLOBAL_CONFIG{"$module"}{"TODOFlag"} = "yes"; |
| } elsif (($action eq "clear") and ($module ne "")) { |
| $GLOBAL_CONFIG{"$module"}{"TODOFlag"} = ""; |
| } else { |
| &B_log("ERROR","TODO_Flag Called with invalid parameters: $action , $module". |
| "audit report may be incorrect."); |
| return 0; #FALSE |
| } |
| } |
| |
| 1; |
| |
| |