| <!-- SPDX-License-Identifier: GPL-2.0 |
| # |
| # Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC |
| # |
| # Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved |
| #---------------------------------------------------------------------------> |
| |
| <?xml version="1.0" encoding="UTF-8"?> |
| |
| <Bin_Ecc_Map> |
| <!-- BMC mandatory fields --> |
| <ImageProperties> |
| <BinSize>0</BinSize> <!-- If 0 the binary size will be calculated by the tool --> |
| <PadValue>0xFF</PadValue> <!-- Byte value to pad the empty areas, default is 0 --> |
| </ImageProperties> |
| |
| <BinField> |
| <!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or |
| uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) --> |
| <name>StartTag</name> <!-- name of field --> |
| <config> |
| <offset>0</offset> |
| <size>0x8</size> |
| </config> |
| <content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content> <!-- content the user should fill --> |
| </BinField> |
| |
| <BinField> |
| <!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for --> |
| <name>DestAddr</name> <!-- name of field --> |
| <config> |
| <offset>0x140</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0xFFFD5E00</content> <!-- content the user should fill --> |
| </BinField> |
| |
| <BinField> |
| <!-- BootBlock or u-boot Code size --> |
| <name>CodeSize</name> <!-- name of field --> |
| <config> |
| <offset>0x144</offset> |
| <size>0x4</size> |
| </config> |
| <content format='FileSize'>Poleg_bootblock.bin</content> <!-- content the user should fill --> |
| </BinField> |
| |
| <BinField> |
| <!-- The BootBlock or u-boot binary file --> |
| <name>Code</name> <!-- name of field --> |
| <config> |
| <offset>0x200</offset> |
| <size format='FileSize'>Poleg_bootblock.bin</size> <!-- size in the header calculated by tool--> |
| </config> |
| <content format='FileContent'>Poleg_bootblock.bin</content> <!-- content the user should fill --> |
| </BinField> |
| |
| <!-- BMC optional fields --> |
| <BinField> |
| <!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register --> |
| <name>FIU0_DRD_CFG_Set</name> <!-- name of field --> |
| <config> |
| <offset>0x108</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0x030011BB</content> <!-- content the user should fill --> |
| </BinField> |
| |
| <BinField> |
| <!-- Defines the clock divide ratio from AHB to FIU0 clock --> |
| <name>FIU_Clk_Divider</name> <!-- name of field --> |
| <config> |
| <offset>0x10C</offset> |
| <size>0x1</size> |
| </config> |
| <content format='bytes'>4</content> <!-- content the user should fill --> |
| </BinField> |
| |
| <BinField> |
| <!-- Version (Major.Minor) --> |
| <name>Version</name> <!-- name of field --> |
| <config> |
| <offset>0x148</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0x0201</content> <!-- content the user should fill --> |
| </BinField> |
| |
| <BinField> |
| <!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) --> |
| <name>BOARD_VENDOR</name> <!-- name of field --> |
| <config> |
| <offset>0x14C</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>100</content> <!--Board_manufacturer: Nuvoton--> |
| </BinField> |
| <BinField> |
| <!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) --> |
| <!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. --> |
| <name>BOARD_TYPE</name> <!-- name of field --> |
| <config> |
| <offset>0x150</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0x02</content> <!--Board_type: EB--> |
| </BinField> |
| |
| <!-- the next two fields are available since version 10.7.0 --> |
| <BinField> |
| <!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 --> |
| <name>MC_FREQ_IN_MHZ</name> <!-- name of field --> |
| <config> |
| <offset>0x11C</offset> |
| <size>0x2</size> |
| </config> |
| <content format='32bit'>800</content> |
| </BinField> |
| <BinField> |
| <!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 --> |
| <name>CPU_FREQ_IN_MHZ</name> <!-- name of field --> |
| <config> |
| <offset>0x154</offset> |
| <size>0x2</size> |
| </config> |
| <content format='32bit'>800</content> |
| </BinField> |
| |
| <BinField> |
| <!-- MC_CONFIG. |
| Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01) |
| Bit 1: MC_CAPABILITY_IGNORE_ECC_DEVICE (0x02) --> |
| <name>MC_CONFIG</name> <!-- name of field --> |
| <config> |
| <offset>0x156</offset> |
| <size>0x1</size> |
| </config> |
| <content format='32bit'>0x00</content> |
| </BinField> |
| |
| <BinField> |
| <!-- HOST_IF. |
| 0xFF: LPC backward compatible |
| 0x00: LPC. |
| 0x01: eSPI |
| 0x02: GPIOs TRIS. --> |
| <name>HOST_IF</name> <!-- name of field --> |
| <config> |
| <offset>0x157</offset> |
| <size>0x1</size> |
| </config> |
| <content format='32bit'>0x00</content> |
| </BinField> |
| |
| <BinField> |
| <!-- SECURITY_LEVEL_T. |
| 0xFF: SECURITY_LEVEL_UNKNOWN: backward compatible |
| 0x00: SECURITY_LEVEL_NONE. |
| 0x01: SECURITY_LEVEL_STANDARD |
| 0x02: SECURITY_LEVEL_NIST. (require BootBlock with NIST support) --> |
| <name>SECURITY_LEVEL_T</name> <!-- name of field --> |
| <config> |
| <offset>0x15C</offset> |
| <size>0x1</size> |
| </config> |
| <content format='32bit'>0xFF</content> |
| </BinField> |
| |
| <BinField> |
| <!-- Key revoke (bitwise). Set bit 0 to revoke key 0 etc. --> |
| <name>SECURITY_REVOKE_KEYS</name> <!-- name of field --> |
| <config> |
| <offset>0x1D7</offset> |
| <size>0x1</size> |
| </config> |
| <content format='bytes'>0x00</content> |
| </BinField> |
| |
| <BinField> |
| <!-- security log offset --> |
| <name>SECURITY_LOG</name> <!-- name of field --> |
| <config> |
| <offset>0x1D8</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0x090000</content> |
| </BinField> |
| <BinField> |
| <!-- hole 0 size: used for NIST security. --> |
| <name>SECURITY_LOG_SIZE</name> <!-- name of field --> |
| <config> |
| <offset>0x1DC</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0x3000</content> |
| </BinField> |
| |
| |
| <BinField> |
| <!-- hole 0: used for NIST security. --> |
| <name>HOLE0</name> <!-- name of field --> |
| <config> |
| <offset>0x1E0</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0x0A0000</content> |
| </BinField> |
| <BinField> |
| <!-- hole 0 size: used for NIST security. --> |
| <name>HOLE0_SIZE</name> <!-- name of field --> |
| <config> |
| <offset>0x1E4</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0xF70000</content> |
| </BinField> |
| |
| <BinField> |
| <!-- hole 1: used for NIST security. --> |
| <name>HOLE1</name> <!-- name of field --> |
| <config> |
| <offset>0x1E8</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0</content> |
| </BinField> |
| <BinField> |
| <!-- hole 1 size: used for NIST security. --> |
| <name>HOLE1_SIZE</name> <!-- name of field --> |
| <config> |
| <offset>0x1EC</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0</content> |
| </BinField> |
| |
| |
| <BinField> |
| <!-- hole 2: used for NIST security. --> |
| <name>HOLE2</name> <!-- name of field --> |
| <config> |
| <offset>0x1F0</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0xFFFFFFFF</content> |
| </BinField> |
| <BinField> |
| <!-- hole 2 size: used for NIST security. --> |
| <name>HOLE2_SIZE</name> <!-- name of field --> |
| <config> |
| <offset>0x1F4</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0</content> |
| </BinField> |
| |
| <BinField> |
| <!-- hole 3: used for NIST security. --> |
| <name>HOLE3</name> <!-- name of field --> |
| <config> |
| <offset>0x1F8</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0</content> |
| </BinField> |
| <BinField> |
| <!-- hole 3 size: used for NIST security. --> |
| <name>HOLE3_SIZE</name> <!-- name of field --> |
| <config> |
| <offset>0x1FC</offset> |
| <size>0x4</size> |
| </config> |
| <content format='32bit'>0</content> |
| </BinField> |
| |
| </Bin_Ecc_Map> |