| From ce27f7e22b2cd7453a425e08780a338a71301961 Mon Sep 17 00:00:00 2001 |
| From: Leon Anavi <leon.anavi@konsulko.com> |
| Date: Mon, 20 Nov 2023 15:19:15 +0200 |
| Subject: [PATCH] config.txt: reintroduce start_x |
| |
| Reintroduce configuration "start_x". Based on the experience with |
| Yocto/OpenEmbedded layer meta-raspberrypi, it has been observed |
| that Raspberry Pi 4B 4GB may fail to enable the camera if |
| "start_x=1" is at the end of the file. Therefore, "start_x=1" |
| is expected in config.txt template and it has been set to replace |
| the original occurrence, which is at the middle of the file. |
| Also update revision and date stamp. |
| |
| GitHub pull request: https://github.com/Evilpaul/RPi-config/pull/8 |
| |
| Upstream-Status: Submitted |
| |
| Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> |
| --- |
| config.txt | 12 +++++++++++- |
| 1 file changed, 11 insertions(+), 1 deletion(-) |
| |
| diff --git a/config.txt b/config.txt |
| index 1cf7b29..e28ed02 100644 |
| --- a/config.txt |
| +++ b/config.txt |
| @@ -1,7 +1,7 @@ |
| ################################################################################ |
| ## Raspberry Pi Configuration Settings |
| ## |
| -## Revision 17, 2021/08/15 |
| +## Revision 18, 2023/11/20 |
| ## |
| ## Details taken from the eLinux wiki and official Raspberry Pi documentation. |
| ## For up-to-date information please refer to links below. |
| @@ -760,6 +760,16 @@ |
| ## Camera Settings |
| ################################################################################ |
| |
| +## start_x |
| +## Set to "1" to enable the camera module. |
| +## |
| +## Enabling the camera requires gpu_mem option to be specified with a value |
| +## of at least 128. |
| +## |
| +## Default 0 |
| +## |
| +#start_x=0 |
| + |
| ## disable_camera_led |
| ## Turn off the red camera led when recording video or taking a still |
| ## picture. |
| -- |
| 2.39.2 |
| |