| #@TYPE: Machine |
| #@NAME: qemu-zynq7 |
| #@DESCRIPTION: Zynq QEMU machine support ('xilinx-zynq-a9' model) |
| |
| require conf/machine/include/soc-zynq.inc |
| require conf/machine/include/machine-xilinx-default.inc |
| require conf/machine/include/machine-xilinx-qemu.inc |
| |
| MACHINE_FEATURES = "ext2 vfat" |
| |
| SERIAL_CONSOLES ?= "115200;ttyPS0" |
| |
| MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree" |
| |
| HDF_MACHINE = "zc702-zynq7" |
| |
| # Use the networking setup from qemuarm |
| MACHINEOVERRIDES_prepend_pn-init-ifupdown = "qemuall:" |
| FILESOVERRIDES_append_pn-init-ifupdown = ":qemuarm" |
| |
| QB_MEM = "-m 1024" |
| QB_NETWORK_DEVICE = "-net nic,netdev=eth0 -netdev user,id=eth0,tftp=/tftpboot -net nic" |
| QB_DEFAULT_KERNEL_qemuboot-xilinx = "zImage" |
| |
| QB_SYSTEM_NAME ?= "${@qemu_target_binary(d)}" |
| QB_DEFAULT_FSTYPE = "cpio.gz.u-boot" |
| QB_DTB = "system.dtb" |
| QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw" |
| |
| # Replicate BootROM like behaviour, having loaded SPL and PMU(ROM+FW) |
| QB_OPT_APPEND = " \ |
| -nographic -serial null -serial mon:stdio \ |
| -initrd ${DEPLOY_DIR_IMAGE}/petalinux-image-minimal-qemu-zynq7.cpio.gz.u-boot \ |
| -gdb tcp::9000 \ |
| -device loader,addr=0xf8000008,data=0xDF0D,data-len=4 \ |
| -device loader,addr=0xf8000140,data=0x00500801,data-len=4 \ |
| -device loader,addr=0xf800012c,data=0x1ed044d,data-len=4 \ |
| -device loader,addr=0xf8000108,data=0x0001e008,data-len=4 \ |
| -device loader,addr=0xF8000910,data=0xF,data-len=0x4 \ |
| " |