| # tinfoil: a simple wrapper around cooker for bitbake-based command-line utilities |
| # |
| # Copyright (C) 2012-2017 Intel Corporation |
| # Copyright (C) 2011 Mentor Graphics Corporation |
| # Copyright (C) 2006-2012 Richard Purdie |
| # |
| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| |
| import logging |
| import os |
| import sys |
| import time |
| import atexit |
| import re |
| from collections import OrderedDict, defaultdict |
| from functools import partial |
| |
| import bb.cache |
| import bb.cooker |
| import bb.providers |
| import bb.taskdata |
| import bb.utils |
| import bb.command |
| import bb.remotedata |
| from bb.main import setup_bitbake, BitBakeConfigParameters |
| import bb.fetch2 |
| |
| |
| # We need this in order to shut down the connection to the bitbake server, |
| # otherwise the process will never properly exit |
| _server_connections = [] |
| def _terminate_connections(): |
| for connection in _server_connections: |
| connection.terminate() |
| atexit.register(_terminate_connections) |
| |
| class TinfoilUIException(Exception): |
| """Exception raised when the UI returns non-zero from its main function""" |
| def __init__(self, returncode): |
| self.returncode = returncode |
| def __repr__(self): |
| return 'UI module main returned %d' % self.returncode |
| |
| class TinfoilCommandFailed(Exception): |
| """Exception raised when run_command fails""" |
| |
| class TinfoilDataStoreConnectorVarHistory: |
| def __init__(self, tinfoil, dsindex): |
| self.tinfoil = tinfoil |
| self.dsindex = dsindex |
| |
| def remoteCommand(self, cmd, *args, **kwargs): |
| return self.tinfoil.run_command('dataStoreConnectorVarHistCmd', self.dsindex, cmd, args, kwargs) |
| |
| def emit(self, var, oval, val, o, d): |
| ret = self.tinfoil.run_command('dataStoreConnectorVarHistCmdEmit', self.dsindex, var, oval, val, d.dsindex) |
| o.write(ret) |
| |
| def __getattr__(self, name): |
| if not hasattr(bb.data_smart.VariableHistory, name): |
| raise AttributeError("VariableHistory has no such method %s" % name) |
| |
| newfunc = partial(self.remoteCommand, name) |
| setattr(self, name, newfunc) |
| return newfunc |
| |
| class TinfoilDataStoreConnectorIncHistory: |
| def __init__(self, tinfoil, dsindex): |
| self.tinfoil = tinfoil |
| self.dsindex = dsindex |
| |
| def remoteCommand(self, cmd, *args, **kwargs): |
| return self.tinfoil.run_command('dataStoreConnectorIncHistCmd', self.dsindex, cmd, args, kwargs) |
| |
| def __getattr__(self, name): |
| if not hasattr(bb.data_smart.IncludeHistory, name): |
| raise AttributeError("IncludeHistory has no such method %s" % name) |
| |
| newfunc = partial(self.remoteCommand, name) |
| setattr(self, name, newfunc) |
| return newfunc |
| |
| class TinfoilDataStoreConnector: |
| """ |
| Connector object used to enable access to datastore objects via tinfoil |
| Method calls are transmitted to the remote datastore for processing, if a datastore is |
| returned we return a connector object for the new store |
| """ |
| |
| def __init__(self, tinfoil, dsindex): |
| self.tinfoil = tinfoil |
| self.dsindex = dsindex |
| self.varhistory = TinfoilDataStoreConnectorVarHistory(tinfoil, dsindex) |
| self.inchistory = TinfoilDataStoreConnectorIncHistory(tinfoil, dsindex) |
| |
| def remoteCommand(self, cmd, *args, **kwargs): |
| ret = self.tinfoil.run_command('dataStoreConnectorCmd', self.dsindex, cmd, args, kwargs) |
| if isinstance(ret, bb.command.DataStoreConnectionHandle): |
| return TinfoilDataStoreConnector(self.tinfoil, ret.dsindex) |
| return ret |
| |
| def __getattr__(self, name): |
| if not hasattr(bb.data._dict_type, name): |
| raise AttributeError("Data store has no such method %s" % name) |
| |
| newfunc = partial(self.remoteCommand, name) |
| setattr(self, name, newfunc) |
| return newfunc |
| |
| def __iter__(self): |
| keys = self.tinfoil.run_command('dataStoreConnectorCmd', self.dsindex, "keys", [], {}) |
| for k in keys: |
| yield k |
| |
| class TinfoilCookerAdapter: |
| """ |
| Provide an adapter for existing code that expects to access a cooker object via Tinfoil, |
| since now Tinfoil is on the client side it no longer has direct access. |
| """ |
| |
| class TinfoilCookerCollectionAdapter: |
| """ cooker.collection adapter """ |
| def __init__(self, tinfoil, mc=''): |
| self.tinfoil = tinfoil |
| self.mc = mc |
| def get_file_appends(self, fn): |
| return self.tinfoil.get_file_appends(fn, self.mc) |
| def __getattr__(self, name): |
| if name == 'overlayed': |
| return self.tinfoil.get_overlayed_recipes(self.mc) |
| elif name == 'bbappends': |
| return self.tinfoil.run_command('getAllAppends', self.mc) |
| else: |
| raise AttributeError("%s instance has no attribute '%s'" % (self.__class__.__name__, name)) |
| |
| class TinfoilRecipeCacheAdapter: |
| """ cooker.recipecache adapter """ |
| def __init__(self, tinfoil, mc=''): |
| self.tinfoil = tinfoil |
| self.mc = mc |
| self._cache = {} |
| |
| def get_pkg_pn_fn(self): |
| pkg_pn = defaultdict(list, self.tinfoil.run_command('getRecipes', self.mc) or []) |
| pkg_fn = {} |
| for pn, fnlist in pkg_pn.items(): |
| for fn in fnlist: |
| pkg_fn[fn] = pn |
| self._cache['pkg_pn'] = pkg_pn |
| self._cache['pkg_fn'] = pkg_fn |
| |
| def __getattr__(self, name): |
| # Grab these only when they are requested since they aren't always used |
| if name in self._cache: |
| return self._cache[name] |
| elif name == 'pkg_pn': |
| self.get_pkg_pn_fn() |
| return self._cache[name] |
| elif name == 'pkg_fn': |
| self.get_pkg_pn_fn() |
| return self._cache[name] |
| elif name == 'deps': |
| attrvalue = defaultdict(list, self.tinfoil.run_command('getRecipeDepends', self.mc) or []) |
| elif name == 'rundeps': |
| attrvalue = defaultdict(lambda: defaultdict(list), self.tinfoil.run_command('getRuntimeDepends', self.mc) or []) |
| elif name == 'runrecs': |
| attrvalue = defaultdict(lambda: defaultdict(list), self.tinfoil.run_command('getRuntimeRecommends', self.mc) or []) |
| elif name == 'pkg_pepvpr': |
| attrvalue = self.tinfoil.run_command('getRecipeVersions', self.mc) or {} |
| elif name == 'inherits': |
| attrvalue = self.tinfoil.run_command('getRecipeInherits', self.mc) or {} |
| elif name == 'bbfile_priority': |
| attrvalue = self.tinfoil.run_command('getBbFilePriority', self.mc) or {} |
| elif name == 'pkg_dp': |
| attrvalue = self.tinfoil.run_command('getDefaultPreference', self.mc) or {} |
| elif name == 'fn_provides': |
| attrvalue = self.tinfoil.run_command('getRecipeProvides', self.mc) or {} |
| elif name == 'packages': |
| attrvalue = self.tinfoil.run_command('getRecipePackages', self.mc) or {} |
| elif name == 'packages_dynamic': |
| attrvalue = self.tinfoil.run_command('getRecipePackagesDynamic', self.mc) or {} |
| elif name == 'rproviders': |
| attrvalue = self.tinfoil.run_command('getRProviders', self.mc) or {} |
| else: |
| raise AttributeError("%s instance has no attribute '%s'" % (self.__class__.__name__, name)) |
| |
| self._cache[name] = attrvalue |
| return attrvalue |
| |
| def __init__(self, tinfoil): |
| self.tinfoil = tinfoil |
| self.multiconfigs = [''] + (tinfoil.config_data.getVar('BBMULTICONFIG') or '').split() |
| self.collections = {} |
| self.recipecaches = {} |
| for mc in self.multiconfigs: |
| self.collections[mc] = self.TinfoilCookerCollectionAdapter(tinfoil, mc) |
| self.recipecaches[mc] = self.TinfoilRecipeCacheAdapter(tinfoil, mc) |
| self._cache = {} |
| def __getattr__(self, name): |
| # Grab these only when they are requested since they aren't always used |
| if name in self._cache: |
| return self._cache[name] |
| elif name == 'skiplist': |
| attrvalue = self.tinfoil.get_skipped_recipes() |
| elif name == 'bbfile_config_priorities': |
| ret = self.tinfoil.run_command('getLayerPriorities') |
| bbfile_config_priorities = [] |
| for collection, pattern, regex, pri in ret: |
| bbfile_config_priorities.append((collection, pattern, re.compile(regex), pri)) |
| |
| attrvalue = bbfile_config_priorities |
| else: |
| raise AttributeError("%s instance has no attribute '%s'" % (self.__class__.__name__, name)) |
| |
| self._cache[name] = attrvalue |
| return attrvalue |
| |
| def findBestProvider(self, pn): |
| return self.tinfoil.find_best_provider(pn) |
| |
| |
| class TinfoilRecipeInfo: |
| """ |
| Provides a convenient representation of the cached information for a single recipe. |
| Some attributes are set on construction, others are read on-demand (which internally |
| may result in a remote procedure call to the bitbake server the first time). |
| Note that only information which is cached is available through this object - if |
| you need other variable values you will need to parse the recipe using |
| Tinfoil.parse_recipe(). |
| """ |
| def __init__(self, recipecache, d, pn, fn, fns): |
| self._recipecache = recipecache |
| self._d = d |
| self.pn = pn |
| self.fn = fn |
| self.fns = fns |
| self.inherit_files = recipecache.inherits[fn] |
| self.depends = recipecache.deps[fn] |
| (self.pe, self.pv, self.pr) = recipecache.pkg_pepvpr[fn] |
| self._cached_packages = None |
| self._cached_rprovides = None |
| self._cached_packages_dynamic = None |
| |
| def __getattr__(self, name): |
| if name == 'alternates': |
| return [x for x in self.fns if x != self.fn] |
| elif name == 'rdepends': |
| return self._recipecache.rundeps[self.fn] |
| elif name == 'rrecommends': |
| return self._recipecache.runrecs[self.fn] |
| elif name == 'provides': |
| return self._recipecache.fn_provides[self.fn] |
| elif name == 'packages': |
| if self._cached_packages is None: |
| self._cached_packages = [] |
| for pkg, fns in self._recipecache.packages.items(): |
| if self.fn in fns: |
| self._cached_packages.append(pkg) |
| return self._cached_packages |
| elif name == 'packages_dynamic': |
| if self._cached_packages_dynamic is None: |
| self._cached_packages_dynamic = [] |
| for pkg, fns in self._recipecache.packages_dynamic.items(): |
| if self.fn in fns: |
| self._cached_packages_dynamic.append(pkg) |
| return self._cached_packages_dynamic |
| elif name == 'rprovides': |
| if self._cached_rprovides is None: |
| self._cached_rprovides = [] |
| for pkg, fns in self._recipecache.rproviders.items(): |
| if self.fn in fns: |
| self._cached_rprovides.append(pkg) |
| return self._cached_rprovides |
| else: |
| raise AttributeError("%s instance has no attribute '%s'" % (self.__class__.__name__, name)) |
| def inherits(self, only_recipe=False): |
| """ |
| Get the inherited classes for a recipe. Returns the class names only. |
| Parameters: |
| only_recipe: True to return only the classes inherited by the recipe |
| itself, False to return all classes inherited within |
| the context for the recipe (which includes globally |
| inherited classes). |
| """ |
| if only_recipe: |
| global_inherit = [x for x in (self._d.getVar('BBINCLUDED') or '').split() if x.endswith('.bbclass')] |
| else: |
| global_inherit = [] |
| for clsfile in self.inherit_files: |
| if only_recipe and clsfile in global_inherit: |
| continue |
| clsname = os.path.splitext(os.path.basename(clsfile))[0] |
| yield clsname |
| def __str__(self): |
| return '%s' % self.pn |
| |
| |
| class Tinfoil: |
| """ |
| Tinfoil - an API for scripts and utilities to query |
| BitBake internals and perform build operations. |
| """ |
| |
| def __init__(self, output=sys.stdout, tracking=False, setup_logging=True): |
| """ |
| Create a new tinfoil object. |
| Parameters: |
| output: specifies where console output should be sent. Defaults |
| to sys.stdout. |
| tracking: True to enable variable history tracking, False to |
| disable it (default). Enabling this has a minor |
| performance impact so typically it isn't enabled |
| unless you need to query variable history. |
| setup_logging: True to setup a logger so that things like |
| bb.warn() will work immediately and timeout warnings |
| are visible; False to let BitBake do this itself. |
| """ |
| self.logger = logging.getLogger('BitBake') |
| self.config_data = None |
| self.cooker = None |
| self.tracking = tracking |
| self.ui_module = None |
| self.server_connection = None |
| self.recipes_parsed = False |
| self.quiet = 0 |
| self.oldhandlers = self.logger.handlers[:] |
| if setup_logging: |
| # This is the *client-side* logger, nothing to do with |
| # logging messages from the server |
| bb.msg.logger_create('BitBake', output) |
| self.localhandlers = [] |
| for handler in self.logger.handlers: |
| if handler not in self.oldhandlers: |
| self.localhandlers.append(handler) |
| |
| def __enter__(self): |
| return self |
| |
| def __exit__(self, type, value, traceback): |
| self.shutdown() |
| |
| def prepare(self, config_only=False, config_params=None, quiet=0, extra_features=None): |
| """ |
| Prepares the underlying BitBake system to be used via tinfoil. |
| This function must be called prior to calling any of the other |
| functions in the API. |
| NOTE: if you call prepare() you must absolutely call shutdown() |
| before your code terminates. You can use a "with" block to ensure |
| this happens e.g. |
| |
| with bb.tinfoil.Tinfoil() as tinfoil: |
| tinfoil.prepare() |
| ... |
| |
| Parameters: |
| config_only: True to read only the configuration and not load |
| the cache / parse recipes. This is useful if you just |
| want to query the value of a variable at the global |
| level or you want to do anything else that doesn't |
| involve knowing anything about the recipes in the |
| current configuration. False loads the cache / parses |
| recipes. |
| config_params: optionally specify your own configuration |
| parameters. If not specified an instance of |
| TinfoilConfigParameters will be created internally. |
| quiet: quiet level controlling console output - equivalent |
| to bitbake's -q/--quiet option. Default of 0 gives |
| the same output level as normal bitbake execution. |
| extra_features: extra features to be added to the feature |
| set requested from the server. See |
| CookerFeatures._feature_list for possible |
| features. |
| """ |
| self.quiet = quiet |
| |
| if self.tracking: |
| extrafeatures = [bb.cooker.CookerFeatures.BASEDATASTORE_TRACKING] |
| else: |
| extrafeatures = [] |
| |
| if extra_features: |
| extrafeatures += extra_features |
| |
| if not config_params: |
| config_params = TinfoilConfigParameters(config_only=config_only, quiet=quiet) |
| |
| if not config_only: |
| # Disable local loggers because the UI module is going to set up its own |
| for handler in self.localhandlers: |
| self.logger.handlers.remove(handler) |
| self.localhandlers = [] |
| |
| self.server_connection, ui_module = setup_bitbake(config_params, extrafeatures) |
| |
| self.ui_module = ui_module |
| |
| # Ensure the path to bitbake's bin directory is in PATH so that things like |
| # bitbake-worker can be run (usually this is the case, but it doesn't have to be) |
| path = os.getenv('PATH').split(':') |
| bitbakebinpath = os.path.abspath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', '..', 'bin')) |
| for entry in path: |
| if entry.endswith(os.sep): |
| entry = entry[:-1] |
| if os.path.abspath(entry) == bitbakebinpath: |
| break |
| else: |
| path.insert(0, bitbakebinpath) |
| os.environ['PATH'] = ':'.join(path) |
| |
| if self.server_connection: |
| _server_connections.append(self.server_connection) |
| if config_only: |
| config_params.updateToServer(self.server_connection.connection, os.environ.copy()) |
| self.run_command('parseConfiguration') |
| else: |
| self.run_actions(config_params) |
| self.recipes_parsed = True |
| |
| self.config_data = TinfoilDataStoreConnector(self, 0) |
| self.cooker = TinfoilCookerAdapter(self) |
| self.cooker_data = self.cooker.recipecaches[''] |
| else: |
| raise Exception('Failed to start bitbake server') |
| |
| def run_actions(self, config_params): |
| """ |
| Run the actions specified in config_params through the UI. |
| """ |
| ret = self.ui_module.main(self.server_connection.connection, self.server_connection.events, config_params) |
| if ret: |
| raise TinfoilUIException(ret) |
| |
| def parseRecipes(self): |
| """ |
| Legacy function - use parse_recipes() instead. |
| """ |
| self.parse_recipes() |
| |
| def parse_recipes(self): |
| """ |
| Load information on all recipes. Normally you should specify |
| config_only=False when calling prepare() instead of using this |
| function; this function is designed for situations where you need |
| to initialise Tinfoil and use it with config_only=True first and |
| then conditionally call this function to parse recipes later. |
| """ |
| config_params = TinfoilConfigParameters(config_only=False, quiet=self.quiet) |
| self.run_actions(config_params) |
| self.recipes_parsed = True |
| |
| def run_command(self, command, *params, handle_events=True): |
| """ |
| Run a command on the server (as implemented in bb.command). |
| Note that there are two types of command - synchronous and |
| asynchronous; in order to receive the results of asynchronous |
| commands you will need to set an appropriate event mask |
| using set_event_mask() and listen for the result using |
| wait_event() - with the correct event mask you'll at least get |
| bb.command.CommandCompleted and possibly other events before |
| that depending on the command. |
| """ |
| if not self.server_connection: |
| raise Exception('Not connected to server (did you call .prepare()?)') |
| |
| commandline = [command] |
| if params: |
| commandline.extend(params) |
| try: |
| result = self.server_connection.connection.runCommand(commandline) |
| finally: |
| while handle_events: |
| event = self.wait_event() |
| if not event: |
| break |
| if isinstance(event, logging.LogRecord): |
| if event.taskpid == 0 or event.levelno > logging.INFO: |
| self.logger.handle(event) |
| if result[1]: |
| raise TinfoilCommandFailed(result[1]) |
| return result[0] |
| |
| def set_event_mask(self, eventlist): |
| """Set the event mask which will be applied within wait_event()""" |
| if not self.server_connection: |
| raise Exception('Not connected to server (did you call .prepare()?)') |
| llevel, debug_domains = bb.msg.constructLogOptions() |
| ret = self.run_command('setEventMask', self.server_connection.connection.getEventHandle(), llevel, debug_domains, eventlist) |
| if not ret: |
| raise Exception('setEventMask failed') |
| |
| def wait_event(self, timeout=0): |
| """ |
| Wait for an event from the server for the specified time. |
| A timeout of 0 means don't wait if there are no events in the queue. |
| Returns the next event in the queue or None if the timeout was |
| reached. Note that in order to receive any events you will |
| first need to set the internal event mask using set_event_mask() |
| (otherwise whatever event mask the UI set up will be in effect). |
| """ |
| if not self.server_connection: |
| raise Exception('Not connected to server (did you call .prepare()?)') |
| return self.server_connection.events.waitEvent(timeout) |
| |
| def get_overlayed_recipes(self, mc=''): |
| """ |
| Find recipes which are overlayed (i.e. where recipes exist in multiple layers) |
| """ |
| return defaultdict(list, self.run_command('getOverlayedRecipes', mc)) |
| |
| def get_skipped_recipes(self): |
| """ |
| Find recipes which were skipped (i.e. SkipRecipe was raised |
| during parsing). |
| """ |
| return OrderedDict(self.run_command('getSkippedRecipes')) |
| |
| def get_all_providers(self, mc=''): |
| return defaultdict(list, self.run_command('allProviders', mc)) |
| |
| def find_providers(self, mc=''): |
| return self.run_command('findProviders', mc) |
| |
| def find_best_provider(self, pn): |
| return self.run_command('findBestProvider', pn) |
| |
| def get_runtime_providers(self, rdep): |
| return self.run_command('getRuntimeProviders', rdep) |
| |
| def get_recipe_file(self, pn): |
| """ |
| Get the file name for the specified recipe/target. Raises |
| bb.providers.NoProvider if there is no match or the recipe was |
| skipped. |
| """ |
| best = self.find_best_provider(pn) |
| if not best or (len(best) > 3 and not best[3]): |
| skiplist = self.get_skipped_recipes() |
| taskdata = bb.taskdata.TaskData(None, skiplist=skiplist) |
| skipreasons = taskdata.get_reasons(pn) |
| if skipreasons: |
| raise bb.providers.NoProvider('%s is unavailable:\n %s' % (pn, ' \n'.join(skipreasons))) |
| else: |
| raise bb.providers.NoProvider('Unable to find any recipe file matching "%s"' % pn) |
| return best[3] |
| |
| def get_file_appends(self, fn, mc=''): |
| """ |
| Find the bbappends for a recipe file |
| """ |
| return self.run_command('getFileAppends', fn, mc) |
| |
| def all_recipes(self, mc='', sort=True): |
| """ |
| Enable iterating over all recipes in the current configuration. |
| Returns an iterator over TinfoilRecipeInfo objects created on demand. |
| Parameters: |
| mc: The multiconfig, default of '' uses the main configuration. |
| sort: True to sort recipes alphabetically (default), False otherwise |
| """ |
| recipecache = self.cooker.recipecaches[mc] |
| if sort: |
| recipes = sorted(recipecache.pkg_pn.items()) |
| else: |
| recipes = recipecache.pkg_pn.items() |
| for pn, fns in recipes: |
| prov = self.find_best_provider(pn) |
| recipe = TinfoilRecipeInfo(recipecache, |
| self.config_data, |
| pn=pn, |
| fn=prov[3], |
| fns=fns) |
| yield recipe |
| |
| def all_recipe_files(self, mc='', variants=True, preferred_only=False): |
| """ |
| Enable iterating over all recipe files in the current configuration. |
| Returns an iterator over file paths. |
| Parameters: |
| mc: The multiconfig, default of '' uses the main configuration. |
| variants: True to include variants of recipes created through |
| BBCLASSEXTEND (default) or False to exclude them |
| preferred_only: True to include only the preferred recipe where |
| multiple exist providing the same PN, False to list |
| all recipes |
| """ |
| recipecache = self.cooker.recipecaches[mc] |
| if preferred_only: |
| files = [] |
| for pn in recipecache.pkg_pn.keys(): |
| prov = self.find_best_provider(pn) |
| files.append(prov[3]) |
| else: |
| files = recipecache.pkg_fn.keys() |
| for fn in sorted(files): |
| if not variants and fn.startswith('virtual:'): |
| continue |
| yield fn |
| |
| |
| def get_recipe_info(self, pn, mc=''): |
| """ |
| Get information on a specific recipe in the current configuration by name (PN). |
| Returns a TinfoilRecipeInfo object created on demand. |
| Parameters: |
| mc: The multiconfig, default of '' uses the main configuration. |
| """ |
| recipecache = self.cooker.recipecaches[mc] |
| prov = self.find_best_provider(pn) |
| fn = prov[3] |
| if fn: |
| actual_pn = recipecache.pkg_fn[fn] |
| recipe = TinfoilRecipeInfo(recipecache, |
| self.config_data, |
| pn=actual_pn, |
| fn=fn, |
| fns=recipecache.pkg_pn[actual_pn]) |
| return recipe |
| else: |
| return None |
| |
| def parse_recipe(self, pn): |
| """ |
| Parse the specified recipe and return a datastore object |
| representing the environment for the recipe. |
| """ |
| fn = self.get_recipe_file(pn) |
| return self.parse_recipe_file(fn) |
| |
| def parse_recipe_file(self, fn, appends=True, appendlist=None, config_data=None): |
| """ |
| Parse the specified recipe file (with or without bbappends) |
| and return a datastore object representing the environment |
| for the recipe. |
| Parameters: |
| fn: recipe file to parse - can be a file path or virtual |
| specification |
| appends: True to apply bbappends, False otherwise |
| appendlist: optional list of bbappend files to apply, if you |
| want to filter them |
| """ |
| if self.tracking: |
| # Enable history tracking just for the parse operation |
| self.run_command('enableDataTracking') |
| try: |
| if appends and appendlist == []: |
| appends = False |
| if config_data: |
| config_data = bb.data.createCopy(config_data) |
| dscon = self.run_command('parseRecipeFile', fn, appends, appendlist, config_data.dsindex) |
| else: |
| dscon = self.run_command('parseRecipeFile', fn, appends, appendlist) |
| if dscon: |
| return self._reconvert_type(dscon, 'DataStoreConnectionHandle') |
| else: |
| return None |
| finally: |
| if self.tracking: |
| self.run_command('disableDataTracking') |
| |
| def build_file(self, buildfile, task, internal=True): |
| """ |
| Runs the specified task for just a single recipe (i.e. no dependencies). |
| This is equivalent to bitbake -b, except with the default internal=True |
| no warning about dependencies will be produced, normal info messages |
| from the runqueue will be silenced and BuildInit, BuildStarted and |
| BuildCompleted events will not be fired. |
| """ |
| return self.run_command('buildFile', buildfile, task, internal) |
| |
| def build_targets(self, targets, task=None, handle_events=True, extra_events=None, event_callback=None): |
| """ |
| Builds the specified targets. This is equivalent to a normal invocation |
| of bitbake. Has built-in event handling which is enabled by default and |
| can be extended if needed. |
| Parameters: |
| targets: |
| One or more targets to build. Can be a list or a |
| space-separated string. |
| task: |
| The task to run; if None then the value of BB_DEFAULT_TASK |
| will be used. Default None. |
| handle_events: |
| True to handle events in a similar way to normal bitbake |
| invocation with knotty; False to return immediately (on the |
| assumption that the caller will handle the events instead). |
| Default True. |
| extra_events: |
| An optional list of events to add to the event mask (if |
| handle_events=True). If you add events here you also need |
| to specify a callback function in event_callback that will |
| handle the additional events. Default None. |
| event_callback: |
| An optional function taking a single parameter which |
| will be called first upon receiving any event (if |
| handle_events=True) so that the caller can override or |
| extend the event handling. Default None. |
| """ |
| if isinstance(targets, str): |
| targets = targets.split() |
| if not task: |
| task = self.config_data.getVar('BB_DEFAULT_TASK') |
| |
| if handle_events: |
| # A reasonable set of default events matching up with those we handle below |
| eventmask = [ |
| 'bb.event.BuildStarted', |
| 'bb.event.BuildCompleted', |
| 'logging.LogRecord', |
| 'bb.event.NoProvider', |
| 'bb.command.CommandCompleted', |
| 'bb.command.CommandFailed', |
| 'bb.build.TaskStarted', |
| 'bb.build.TaskFailed', |
| 'bb.build.TaskSucceeded', |
| 'bb.build.TaskFailedSilent', |
| 'bb.build.TaskProgress', |
| 'bb.runqueue.runQueueTaskStarted', |
| 'bb.runqueue.sceneQueueTaskStarted', |
| 'bb.event.ProcessStarted', |
| 'bb.event.ProcessProgress', |
| 'bb.event.ProcessFinished', |
| ] |
| if extra_events: |
| eventmask.extend(extra_events) |
| ret = self.set_event_mask(eventmask) |
| |
| includelogs = self.config_data.getVar('BBINCLUDELOGS') |
| loglines = self.config_data.getVar('BBINCLUDELOGS_LINES') |
| |
| ret = self.run_command('buildTargets', targets, task) |
| if handle_events: |
| lastevent = time.time() |
| result = False |
| # Borrowed from knotty, instead somewhat hackily we use the helper |
| # as the object to store "shutdown" on |
| helper = bb.ui.uihelper.BBUIHelper() |
| helper.shutdown = 0 |
| parseprogress = None |
| termfilter = bb.ui.knotty.TerminalFilter(helper, helper, self.logger.handlers, quiet=self.quiet) |
| try: |
| while True: |
| try: |
| event = self.wait_event(0.25) |
| if event: |
| lastevent = time.time() |
| if event_callback and event_callback(event): |
| continue |
| if helper.eventHandler(event): |
| if isinstance(event, bb.build.TaskFailedSilent): |
| self.logger.warning("Logfile for failed setscene task is %s" % event.logfile) |
| elif isinstance(event, bb.build.TaskFailed): |
| bb.ui.knotty.print_event_log(event, includelogs, loglines, termfilter) |
| continue |
| if isinstance(event, bb.event.ProcessStarted): |
| if self.quiet > 1: |
| continue |
| parseprogress = bb.ui.knotty.new_progress(event.processname, event.total) |
| parseprogress.start(False) |
| continue |
| if isinstance(event, bb.event.ProcessProgress): |
| if self.quiet > 1: |
| continue |
| if parseprogress: |
| parseprogress.update(event.progress) |
| else: |
| bb.warn("Got ProcessProgress event for something that never started?") |
| continue |
| if isinstance(event, bb.event.ProcessFinished): |
| if self.quiet > 1: |
| continue |
| if parseprogress: |
| parseprogress.finish() |
| parseprogress = None |
| continue |
| if isinstance(event, bb.command.CommandCompleted): |
| result = True |
| break |
| if isinstance(event, (bb.command.CommandFailed, bb.command.CommandExit)): |
| self.logger.error(str(event)) |
| result = False |
| break |
| if isinstance(event, logging.LogRecord): |
| if event.taskpid == 0 or event.levelno > logging.INFO: |
| self.logger.handle(event) |
| continue |
| if isinstance(event, bb.event.NoProvider): |
| self.logger.error(str(event)) |
| result = False |
| break |
| elif helper.shutdown > 1: |
| break |
| termfilter.updateFooter() |
| if time.time() > (lastevent + (3*60)): |
| if not self.run_command('ping', handle_events=False): |
| print("\nUnable to ping server and no events, closing down...\n") |
| return False |
| except KeyboardInterrupt: |
| termfilter.clearFooter() |
| if helper.shutdown == 1: |
| print("\nSecond Keyboard Interrupt, stopping...\n") |
| ret = self.run_command("stateForceShutdown") |
| if ret and ret[2]: |
| self.logger.error("Unable to cleanly stop: %s" % ret[2]) |
| elif helper.shutdown == 0: |
| print("\nKeyboard Interrupt, closing down...\n") |
| interrupted = True |
| ret = self.run_command("stateShutdown") |
| if ret and ret[2]: |
| self.logger.error("Unable to cleanly shutdown: %s" % ret[2]) |
| helper.shutdown = helper.shutdown + 1 |
| termfilter.clearFooter() |
| finally: |
| termfilter.finish() |
| if helper.failed_tasks: |
| result = False |
| return result |
| else: |
| return ret |
| |
| def shutdown(self): |
| """ |
| Shut down tinfoil. Disconnects from the server and gracefully |
| releases any associated resources. You must call this function if |
| prepare() has been called, or use a with... block when you create |
| the tinfoil object which will ensure that it gets called. |
| """ |
| try: |
| if self.server_connection: |
| try: |
| self.run_command('clientComplete') |
| finally: |
| _server_connections.remove(self.server_connection) |
| bb.event.ui_queue = [] |
| self.server_connection.terminate() |
| self.server_connection = None |
| |
| finally: |
| # Restore logging handlers to how it looked when we started |
| if self.oldhandlers: |
| for handler in self.logger.handlers: |
| if handler not in self.oldhandlers: |
| self.logger.handlers.remove(handler) |
| |
| def _reconvert_type(self, obj, origtypename): |
| """ |
| Convert an object back to the right type, in the case |
| that marshalling has changed it (especially with xmlrpc) |
| """ |
| supported_types = { |
| 'set': set, |
| 'DataStoreConnectionHandle': bb.command.DataStoreConnectionHandle, |
| } |
| |
| origtype = supported_types.get(origtypename, None) |
| if origtype is None: |
| raise Exception('Unsupported type "%s"' % origtypename) |
| if type(obj) == origtype: |
| newobj = obj |
| elif isinstance(obj, dict): |
| # New style class |
| newobj = origtype() |
| for k,v in obj.items(): |
| setattr(newobj, k, v) |
| else: |
| # Assume we can coerce the type |
| newobj = origtype(obj) |
| |
| if isinstance(newobj, bb.command.DataStoreConnectionHandle): |
| newobj = TinfoilDataStoreConnector(self, newobj.dsindex) |
| |
| return newobj |
| |
| |
| class TinfoilConfigParameters(BitBakeConfigParameters): |
| |
| def __init__(self, config_only, **options): |
| self.initial_options = options |
| # Apply some sane defaults |
| if not 'parse_only' in options: |
| self.initial_options['parse_only'] = not config_only |
| #if not 'status_only' in options: |
| # self.initial_options['status_only'] = config_only |
| if not 'ui' in options: |
| self.initial_options['ui'] = 'knotty' |
| if not 'argv' in options: |
| self.initial_options['argv'] = [] |
| |
| super(TinfoilConfigParameters, self).__init__() |
| |
| def parseCommandLine(self, argv=None): |
| # We don't want any parameters parsed from the command line |
| opts = super(TinfoilConfigParameters, self).parseCommandLine([]) |
| for key, val in self.initial_options.items(): |
| setattr(opts[0], key, val) |
| return opts |