| .. SPDX-License-Identifier: CC-BY-SA-2.0-UK |
| |
| ************************************************ |
| Board Support Packages (BSP) - Developer's Guide |
| ************************************************ |
| |
| A Board Support Package (BSP) is a collection of information that |
| defines how to support a particular hardware device, set of devices, or |
| hardware platform. The BSP includes information about the hardware |
| features present on the device and kernel configuration information |
| along with any additional hardware drivers required. The BSP also lists |
| any additional software components required in addition to a generic |
| Linux software stack for both essential and optional platform features. |
| |
| This guide presents information about BSP layers, defines a structure |
| for components so that BSPs follow a commonly understood layout, |
| discusses how to customize a recipe for a BSP, addresses BSP licensing, |
| and provides information that shows you how to create a BSP |
| Layer using the :ref:`bitbake-layers <bsp-guide/bsp:Creating a new BSP Layer Using the \`\`bitbake-layers\`\` Script>` |
| tool. |
| |
| BSP Layers |
| ========== |
| |
| A BSP consists of a file structure inside a base directory. |
| Collectively, you can think of the base directory, its file structure, |
| and the contents as a BSP layer. Although not a strict requirement, BSP |
| layers in the Yocto Project use the following well-established naming |
| convention: :: |
| |
| meta-bsp_root_name |
| |
| The string "meta-" is prepended to the |
| machine or platform name, which is bsp_root_name in the above form. |
| |
| .. note:: |
| |
| Because the BSP layer naming convention is well-established, it is |
| advisable to follow it when creating layers. Technically speaking, a |
| BSP layer name does not need to start with |
| meta-. However, various scripts and tools in the Yocto Project development |
| environment assume this convention. |
| |
| To help understand the BSP layer concept, consider the BSPs that the |
| Yocto Project supports and provides with each release. You can see the |
| layers in the |
| :ref:`overview-manual/overview-manual-development-environment:yocto project source repositories` |
| through |
| a web interface at :yocto_git:`/`. If you go to that interface, |
| you will find a list of repositories under "Yocto Metadata Layers". |
| |
| .. note:: |
| |
| Layers that are no longer actively supported as part of the Yocto |
| Project appear under the heading "Yocto Metadata Layer Archive." |
| |
| Each repository is a BSP layer supported by the Yocto Project (e.g. |
| ``meta-raspberrypi`` and ``meta-intel``). Each of these layers is a |
| repository unto itself and clicking on the layer name displays two URLs |
| from which you can clone the layer's repository to your local system. |
| Here is an example that clones the Raspberry Pi BSP layer: :: |
| |
| $ git clone git://git.yoctoproject.org/meta-raspberrypi |
| |
| In addition to BSP layers, the ``meta-yocto-bsp`` layer is part of the |
| shipped ``poky`` repository. The ``meta-yocto-bsp`` layer maintains |
| several "reference" BSPs including the ARM-based Beaglebone, MIPS-based |
| EdgeRouter, and generic versions of both 32-bit and 64-bit IA machines. |
| |
| For information on typical BSP development workflow, see the |
| :ref:`bsp-guide/bsp:developing a board support package (bsp)` |
| section. For more |
| information on how to set up a local copy of source files from a Git |
| repository, see the |
| :ref:`dev-manual/dev-manual-start:locating yocto project source files` |
| section in the Yocto Project Development Tasks Manual. |
| |
| The BSP layer's base directory (``meta-bsp_root_name``) is the root |
| directory of that Layer. This directory is what you add to the |
| :term:`BBLAYERS` variable in the |
| ``conf/bblayers.conf`` file found in your |
| :term:`Build Directory`, which is |
| established after you run the OpenEmbedded build environment setup |
| script (i.e. :ref:`ref-manual/ref-structure:\`\`oe-init-build-env\`\`` ). |
| Adding the root directory allows the :term:`OpenEmbedded Build System` |
| to recognize the BSP |
| layer and from it build an image. Here is an example: :: |
| |
| BBLAYERS ?= " \ |
| /usr/local/src/yocto/meta \ |
| /usr/local/src/yocto/meta-poky \ |
| /usr/local/src/yocto/meta-yocto-bsp \ |
| /usr/local/src/yocto/meta-mylayer \ |
| " |
| |
| .. note:: |
| |
| Ordering and ``BBFILE_PRIORITY`` for the layers listed in BBLAYERS matter. For |
| example, if multiple layers define a machine configuration, the OpenEmbedded |
| build system uses the last layer searched given similar layer priorities. The |
| build system works from the top-down through the layers listed in ``BBLAYERS``. |
| |
| Some BSPs require or depend on additional layers beyond the BSP's root |
| layer in order to be functional. In this case, you need to specify these |
| layers in the ``README`` "Dependencies" section of the BSP's root layer. |
| Additionally, if any build instructions exist for the BSP, you must add |
| them to the "Dependencies" section. |
| |
| Some layers function as a layer to hold other BSP layers. These layers |
| are knows as ":term:`container layers <Container Layer>`". An example of |
| this type of layer is OpenEmbedded's |
| `meta-openembedded <https://github.com/openembedded/meta-openembedded>`__ |
| layer. The ``meta-openembedded`` layer contains many ``meta-*`` layers. |
| In cases like this, you need to include the names of the actual layers |
| you want to work with, such as: :: |
| |
| BBLAYERS ?= " \ |
| /usr/local/src/yocto/meta \ |
| /usr/local/src/yocto/meta-poky \ |
| /usr/local/src/yocto/meta-yocto-bsp \ |
| /usr/local/src/yocto/meta-mylayer \ |
| .../meta-openembedded/meta-oe \ |
| .../meta-openembedded/meta-perl \ |
| .../meta-openembedded/meta-networking \ |
| " |
| |
| and so on. |
| |
| For more information on layers, see the |
| ":ref:`dev-manual/dev-manual-common-tasks:understanding and creating layers`" |
| section of the Yocto Project Development Tasks Manual. |
| |
| Preparing Your Build Host to Work With BSP Layers |
| ================================================= |
| |
| This section describes how to get your build host ready to work with BSP |
| layers. Once you have the host set up, you can create the layer as |
| described in the |
| ":ref:`bsp-guide/bsp:creating a new bsp layer using the \`\`bitbake-layers\`\` script`" |
| section. |
| |
| .. note:: |
| |
| For structural information on BSPs, see the Example Filesystem Layout |
| section. |
| |
| #. *Set Up the Build Environment:* Be sure you are set up to use BitBake |
| in a shell. See the ":ref:`dev-manual/dev-manual-start:preparing the build host`" |
| section in the Yocto Project Development Tasks Manual for information on how |
| to get a build host ready that is either a native Linux machine or a machine |
| that uses CROPS. |
| |
| #. *Clone the ``poky`` Repository:* You need to have a local copy of the |
| Yocto Project :term:`Source Directory` (i.e. a local |
| ``poky`` repository). See the |
| "ref:`dev-manual/dev-manual-start:cloning the ``poky`` repository`" and |
| possibly the |
| ":ref:`dev-manual/dev-manual-start:checking out by branch in poky`" or |
| ":ref:`dev-manual/dev-manual-start:checking out by tag in poky`" |
| sections |
| all in the Yocto Project Development Tasks Manual for information on |
| how to clone the ``poky`` repository and check out the appropriate |
| branch for your work. |
| |
| #. *Determine the BSP Layer You Want:* The Yocto Project supports many |
| BSPs, which are maintained in their own layers or in layers designed |
| to contain several BSPs. To get an idea of machine support through |
| BSP layers, you can look at the `index of |
| machines <&YOCTO_RELEASE_DL_URL;/machines>`__ for the release. |
| |
| #. *Optionally Clone the ``meta-intel`` BSP Layer:* If your hardware is |
| based on current Intel CPUs and devices, you can leverage this BSP |
| layer. For details on the ``meta-intel`` BSP layer, see the layer's |
| `README <http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/README>`__ |
| file. |
| |
| #. *Navigate to Your Source Directory:* Typically, you set up the |
| ``meta-intel`` Git repository inside the :term:`Source Directory` (e.g. |
| ``poky``). :: |
| |
| $ cd /home/you/poky |
| |
| #. *Clone the Layer:* :: |
| |
| $ git clone git://git.yoctoproject.org/meta-intel.git |
| Cloning into 'meta-intel'... |
| remote: Counting objects: 15585, done. |
| remote: Compressing objects: 100% (5056/5056), done. |
| remote: Total 15585 (delta 9123), reused 15329 (delta 8867) |
| Receiving objects: 100% (15585/15585), 4.51 MiB | 3.19 MiB/s, done. |
| Resolving deltas: 100% (9123/9123), done. |
| Checking connectivity... done. |
| |
| #. *Check Out the Proper Branch:* The branch you check out for |
| ``meta-intel`` must match the same branch you are using for the |
| Yocto Project release (e.g. &DISTRO_NAME_NO_CAP;): :: |
| |
| $ cd meta-intel |
| $ git checkout -b &DISTRO_NAME_NO_CAP; remotes/origin/&DISTRO_NAME_NO_CAP; |
| Branch &DISTRO_NAME_NO_CAP; set up to track remote branch |
| &DISTRO_NAME_NO_CAP; from origin. |
| Switched to a new branch '&DISTRO_NAME_NO_CAP;' |
| |
| .. note:: |
| |
| To see the available branch names in a cloned repository, use the ``git |
| branch -al`` command. See the |
| ":ref:`dev-manual/dev-manual-start:checking out by branch in poky`" |
| section in the Yocto Project Development Tasks Manual for more |
| information. |
| |
| #. *Optionally Set Up an Alternative BSP Layer:* If your hardware can be |
| more closely leveraged to an existing BSP not within the |
| ``meta-intel`` BSP layer, you can clone that BSP layer. |
| |
| The process is identical to the process used for the ``meta-intel`` |
| layer except for the layer's name. For example, if you determine that |
| your hardware most closely matches the ``meta-raspberrypi``, clone |
| that layer: :: |
| |
| $ git clone git://git.yoctoproject.org/meta-raspberrypi |
| Cloning into 'meta-raspberrypi'... |
| remote: Counting objects: 4743, done. |
| remote: Compressing objects: 100% (2185/2185), done. |
| remote: Total 4743 (delta 2447), reused 4496 (delta 2258) |
| Receiving objects: 100% (4743/4743), 1.18 MiB | 0 bytes/s, done. |
| Resolving deltas: 100% (2447/2447), done. |
| Checking connectivity... done. |
| |
| #. *Initialize the Build Environment:* While in the root directory of |
| the Source Directory (i.e. ``poky``), run the |
| :ref:`ref-manual/ref-structure:\`\`oe-init-build-env\`\`` environment |
| setup script to define the OpenEmbedded build environment on your |
| build host. :: |
| |
| $ source &OE_INIT_FILE; |
| |
| Among other things, the script creates the :term:`Build Directory`, which is |
| ``build`` in this case and is located in the :term:`Source Directory`. After |
| the script runs, your current working directory is set to the ``build`` |
| directory. |
| |
| .. _bsp-filelayout: |
| |
| Example Filesystem Layout |
| ========================= |
| |
| Defining a common BSP directory structure allows end-users to understand |
| and become familiar with that standard. A common format also encourages |
| standardization of software support for hardware. |
| |
| The proposed form described in this section does have elements that are |
| specific to the OpenEmbedded build system. It is intended that |
| developers can use this structure with other build systems besides the |
| OpenEmbedded build system. It is also intended that it will be be simple |
| to extract information and convert it to other formats if required. The |
| OpenEmbedded build system, through its standard :ref:`layers mechanism |
| <overview-manual/overview-manual-yp-intro:the yocto project layer model>`, can |
| directly accept the format described as a layer. The BSP layer captures |
| all the hardware-specific details in one place using a standard format, |
| which is useful for any person wishing to use the hardware platform |
| regardless of the build system they are using. |
| |
| The BSP specification does not include a build system or other tools - |
| the specification is concerned with the hardware-specific components |
| only. At the end-distribution point, you can ship the BSP layer combined |
| with a build system and other tools. Realize that it is important to |
| maintain the distinction that the BSP layer, a build system, and tools |
| are separate components that could be combined in certain end products. |
| |
| Before looking at the recommended form for the directory structure |
| inside a BSP layer, you should be aware that some requirements do exist |
| in order for a BSP layer to be considered compliant with the Yocto |
| Project. For that list of requirements, see the |
| ":ref:`bsp-guide/bsp:released bsp requirements`" section. |
| |
| Below is the typical directory structure for a BSP layer. While this |
| basic form represents the standard, realize that the actual layout for |
| individual BSPs could differ. :: |
| |
| meta-bsp_root_name/ |
| meta-bsp_root_name/bsp_license_file |
| meta-bsp_root_name/README |
| meta-bsp_root_name/README.sources |
| meta-bsp_root_name/binary/bootable_images |
| meta-bsp_root_name/conf/layer.conf |
| meta-bsp_root_name/conf/machine/*.conf |
| meta-bsp_root_name/recipes-bsp/* |
| meta-bsp_root_name/recipes-core/* |
| meta-bsp_root_name/recipes-graphics/* |
| meta-bsp_root_name/recipes-kernel/linux/linux-yocto_kernel_rev.bbappend |
| |
| Below is an example of the Raspberry Pi BSP layer that is available from |
| the :yocto_git:`Source Respositories <>`: :: |
| |
| meta-raspberrypi/COPYING.MIT |
| meta-raspberrypi/README.md |
| meta-raspberrypi/classes |
| meta-raspberrypi/classes/sdcard_image-rpi.bbclass |
| meta-raspberrypi/conf/ |
| meta-raspberrypi/conf/layer.conf |
| meta-raspberrypi/conf/machine/ |
| meta-raspberrypi/conf/machine/raspberrypi-cm.conf |
| meta-raspberrypi/conf/machine/raspberrypi-cm3.conf |
| meta-raspberrypi/conf/machine/raspberrypi.conf |
| meta-raspberrypi/conf/machine/raspberrypi0-wifi.conf |
| meta-raspberrypi/conf/machine/raspberrypi0.conf |
| meta-raspberrypi/conf/machine/raspberrypi2.conf |
| meta-raspberrypi/conf/machine/raspberrypi3-64.conf |
| meta-raspberrypi/conf/machine/raspberrypi3.conf |
| meta-raspberrypi/conf/machine/include |
| meta-raspberrypi/conf/machine/include/rpi-base.inc |
| meta-raspberrypi/conf/machine/include/rpi-default-providers.inc |
| meta-raspberrypi/conf/machine/include/rpi-default-settings.inc |
| meta-raspberrypi/conf/machine/include/rpi-default-versions.inc |
| meta-raspberrypi/conf/machine/include/tune-arm1176jzf-s.inc |
| meta-raspberrypi/docs |
| meta-raspberrypi/docs/Makefile |
| meta-raspberrypi/docs/conf.py |
| meta-raspberrypi/docs/contributing.md |
| meta-raspberrypi/docs/extra-apps.md |
| meta-raspberrypi/docs/extra-build-config.md |
| meta-raspberrypi/docs/index.rst |
| meta-raspberrypi/docs/layer-contents.md |
| meta-raspberrypi/docs/readme.md |
| meta-raspberrypi/files |
| meta-raspberrypi/files/custom-licenses |
| meta-raspberrypi/files/custom-licenses/Broadcom |
| meta-raspberrypi/recipes-bsp |
| meta-raspberrypi/recipes-bsp/bootfiles |
| meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb |
| meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb |
| meta-raspberrypi/recipes-bsp/common |
| meta-raspberrypi/recipes-bsp/common/firmware.inc |
| meta-raspberrypi/recipes-bsp/formfactor |
| meta-raspberrypi/recipes-bsp/formfactor/formfactor |
| meta-raspberrypi/recipes-bsp/formfactor/formfactor/raspberrypi |
| meta-raspberrypi/recipes-bsp/formfactor/formfactor/raspberrypi/machconfig |
| meta-raspberrypi/recipes-bsp/formfactor/formfactor_0.0.bbappend |
| meta-raspberrypi/recipes-bsp/rpi-u-boot-src |
| meta-raspberrypi/recipes-bsp/rpi-u-boot-src/files |
| meta-raspberrypi/recipes-bsp/rpi-u-boot-src/files/boot.cmd.in |
| meta-raspberrypi/recipes-bsp/rpi-u-boot-src/rpi-u-boot-scr.bb |
| meta-raspberrypi/recipes-bsp/u-boot |
| meta-raspberrypi/recipes-bsp/u-boot/u-boot |
| meta-raspberrypi/recipes-bsp/u-boot/u-boot/*.patch |
| meta-raspberrypi/recipes-bsp/u-boot/u-boot_%.bbappend |
| meta-raspberrypi/recipes-connectivity |
| meta-raspberrypi/recipes-connectivity/bluez5 |
| meta-raspberrypi/recipes-connectivity/bluez5/bluez5 |
| meta-raspberrypi/recipes-connectivity/bluez5/bluez5/*.patch |
| meta-raspberrypi/recipes-connectivity/bluez5/bluez5/BCM43430A1.hcd |
| meta-raspberrypi/recipes-connectivity/bluez5/bluez5brcm43438.service |
| meta-raspberrypi/recipes-connectivity/bluez5/bluez5_%.bbappend |
| meta-raspberrypi/recipes-core |
| meta-raspberrypi/recipes-core/images |
| meta-raspberrypi/recipes-core/images/rpi-basic-image.bb |
| meta-raspberrypi/recipes-core/images/rpi-hwup-image.bb |
| meta-raspberrypi/recipes-core/images/rpi-test-image.bb |
| meta-raspberrypi/recipes-core/packagegroups |
| meta-raspberrypi/recipes-core/packagegroups/packagegroup-rpi-test.bb |
| meta-raspberrypi/recipes-core/psplash |
| meta-raspberrypi/recipes-core/psplash/files |
| meta-raspberrypi/recipes-core/psplash/files/psplash-raspberrypi-img.h |
| meta-raspberrypi/recipes-core/psplash/psplash_git.bbappend |
| meta-raspberrypi/recipes-core/udev |
| meta-raspberrypi/recipes-core/udev/udev-rules-rpi |
| meta-raspberrypi/recipes-core/udev/udev-rules-rpi/99-com.rules |
| meta-raspberrypi/recipes-core/udev/udev-rules-rpi.bb |
| meta-raspberrypi/recipes-devtools |
| meta-raspberrypi/recipes-devtools/bcm2835 |
| meta-raspberrypi/recipes-devtools/bcm2835/bcm2835_1.52.bb |
| meta-raspberrypi/recipes-devtools/pi-blaster |
| meta-raspberrypi/recipes-devtools/pi-blaster/files |
| meta-raspberrypi/recipes-devtools/pi-blaster/files/*.patch |
| meta-raspberrypi/recipes-devtools/pi-blaster/pi-blaster_git.bb |
| meta-raspberrypi/recipes-devtools/python |
| meta-raspberrypi/recipes-devtools/python/python-rtimu |
| meta-raspberrypi/recipes-devtools/python/python-rtimu/*.patch |
| meta-raspberrypi/recipes-devtools/python/python-rtimu_git.bb |
| meta-raspberrypi/recipes-devtools/python/python-sense-hat_2.2.0.bb |
| meta-raspberrypi/recipes-devtools/python/rpi-gpio |
| meta-raspberrypi/recipes-devtools/python/rpi-gpio/*.patch |
| meta-raspberrypi/recipes-devtools/python/rpi-gpio_0.6.3.bb |
| meta-raspberrypi/recipes-devtools/python/rpio |
| meta-raspberrypi/recipes-devtools/python/rpio/*.patch |
| meta-raspberrypi/recipes-devtools/python/rpio_0.10.0.bb |
| meta-raspberrypi/recipes-devtools/wiringPi |
| meta-raspberrypi/recipes-devtools/wiringPi/files |
| meta-raspberrypi/recipes-devtools/wiringPi/files/*.patch |
| meta-raspberrypi/recipes-devtools/wiringPi/wiringpi_git.bb |
| meta-raspberrypi/recipes-graphics |
| meta-raspberrypi/recipes-graphics/eglinfo |
| meta-raspberrypi/recipes-graphics/eglinfo/eglinfo-fb_%.bbappend |
| meta-raspberrypi/recipes-graphics/eglinfo/eglinfo-x11_%.bbappend |
| meta-raspberrypi/recipes-graphics/mesa |
| meta-raspberrypi/recipes-graphics/mesa/mesa-gl_%.bbappend |
| meta-raspberrypi/recipes-graphics/mesa/mesa_%.bbappend |
| meta-raspberrypi/recipes-graphics/userland |
| meta-raspberrypi/recipes-graphics/userland/userland |
| meta-raspberrypi/recipes-graphics/userland/userland/*.patch |
| meta-raspberrypi/recipes-graphics/userland/userland_git.bb |
| meta-raspberrypi/recipes-graphics/vc-graphics |
| meta-raspberrypi/recipes-graphics/vc-graphics/files |
| meta-raspberrypi/recipes-graphics/vc-graphics/files/egl.pc |
| meta-raspberrypi/recipes-graphics/vc-graphics/files/vchiq.sh |
| meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics-hardfp.bb |
| meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics.bb |
| meta-raspberrypi/recipes-graphics/vc-graphics/vc-graphics.inc |
| meta-raspberrypi/recipes-graphics/wayland |
| meta-raspberrypi/recipes-graphics/wayland/weston_%.bbappend |
| meta-raspberrypi/recipes-graphics/xorg-xserver |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/10-evdev.conf |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/98-pitft.conf |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config/rpi/xorg.conf.d/99-calibration.conf |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend |
| meta-raspberrypi/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend |
| meta-raspberrypi/recipes-kernel |
| meta-raspberrypi/recipes-kernel/linux-firmware |
| meta-raspberrypi/recipes-kernel/linux-firmware/files |
| meta-raspberrypi/recipes-kernel/linux-firmware/files/brcmfmac43430-sdio.bin |
| meta-raspberrypi/recipes-kernel/linux-firmware/files/brcfmac43430-sdio.txt |
| meta-raspberrypi/recipes-kernel/linux-firmware/linux-firmware_%.bbappend |
| meta-raspberrypi/recipes-kernel/linux |
| meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb |
| meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc |
| meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb |
| meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.9.bb |
| meta-raspberrypi/recipes-multimedia |
| meta-raspberrypi/recipes-multimedia/gstreamer |
| meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx |
| meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx/*.patch |
| meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx_%.bbappend |
| meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_%.bbappend |
| meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx-1.12 |
| meta-raspberrypi/recipes-multimedia/gstreamer/gstreamer1.0-omx-1.12/*.patch |
| meta-raspberrypi/recipes-multimedia/omxplayer |
| meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer |
| meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer/*.patch |
| meta-raspberrypi/recipes-multimedia/omxplayer/omxplayer_git.bb |
| meta-raspberrypi/recipes-multimedia/x264 |
| meta-raspberrypi/recipes-multimedia/x264/x264_git.bbappend |
| meta-raspberrypi/wic meta-raspberrypi/wic/sdimage-raspberrypi.wks |
| |
| The following sections describe each part of the proposed BSP format. |
| |
| .. _bsp-filelayout-license: |
| |
| License Files |
| ------------- |
| |
| You can find these files in the BSP Layer at: :: |
| |
| meta-bsp_root_name/bsp_license_file |
| |
| These optional files satisfy licensing requirements for the BSP. The |
| type or types of files here can vary depending on the licensing |
| requirements. For example, in the Raspberry Pi BSP, all licensing |
| requirements are handled with the ``COPYING.MIT`` file. |
| |
| Licensing files can be MIT, BSD, GPLv*, and so forth. These files are |
| recommended for the BSP but are optional and totally up to the BSP |
| developer. For information on how to maintain license compliance, see |
| the ":ref:`dev-manual/dev-manual-common-tasks:maintaining open source license compliance during your product's lifecycle`" |
| section in the Yocto Project Development Tasks Manual. |
| |
| .. _bsp-filelayout-readme: |
| |
| README File |
| ----------- |
| |
| You can find this file in the BSP Layer at: :: |
| |
| meta-bsp_root_name/README |
| |
| This file provides information on how to boot the live images that are |
| optionally included in the ``binary/`` directory. The ``README`` file |
| also provides information needed for building the image. |
| |
| At a minimum, the ``README`` file must contain a list of dependencies, |
| such as the names of any other layers on which the BSP depends and the |
| name of the BSP maintainer with his or her contact information. |
| |
| .. _bsp-filelayout-readme-sources: |
| |
| README.sources File |
| ------------------- |
| |
| You can find this file in the BSP Layer at: :: |
| |
| meta-bsp_root_name/README.sources |
| |
| This file provides information on where to locate the BSP source files |
| used to build the images (if any) that reside in |
| ``meta-bsp_root_name/binary``. Images in the ``binary`` would be images |
| released with the BSP. The information in the ``README.sources`` file |
| also helps you find the :term:`Metadata` |
| used to generate the images that ship with the BSP. |
| |
| .. note:: |
| |
| If the BSP's ``binary`` directory is missing or the directory has no images, an |
| existing ``README.sources`` file is meaningless and usually does not exist. |
| |
| .. _bsp-filelayout-binary: |
| |
| Pre-built User Binaries |
| ----------------------- |
| |
| You can find these files in the BSP Layer at: :: |
| |
| meta-bsp_root_name/binary/bootable_images |
| |
| This optional area contains useful pre-built kernels and user-space |
| filesystem images released with the BSP that are appropriate to the |
| target system. This directory typically contains graphical (e.g. Sato) |
| and minimal live images when the BSP tarball has been created and made |
| available in the :yocto_home:`Yocto Project <>` website. You can |
| use these kernels and images to get a system running and quickly get |
| started on development tasks. |
| |
| The exact types of binaries present are highly hardware-dependent. The |
| :ref:`README <bsp-guide/bsp:readme file>` file should be present in the |
| BSP Layer and it explains how to use the images with the target |
| hardware. Additionally, the |
| :ref:`README.sources <bsp-guide/bsp:readme.sources file>` file should be |
| present to locate the sources used to build the images and provide |
| information on the Metadata. |
| |
| .. _bsp-filelayout-layer: |
| |
| Layer Configuration File |
| ------------------------ |
| |
| You can find this file in the BSP Layer at: :: |
| |
| meta-bsp_root_name/conf/layer.conf |
| |
| The ``conf/layer.conf`` file identifies the file structure as a layer, |
| identifies the contents of the layer, and contains information about how |
| the build system should use it. Generally, a standard boilerplate file |
| such as the following works. In the following example, you would replace |
| bsp with the actual name of the BSP (i.e. bsp_root_name from the example |
| template). :: |
| |
| # We have a conf and classes directory, add to BBPATH |
| BBPATH .= ":${LAYERDIR}" |
| |
| # We have a recipes directory, add to BBFILES |
| BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ |
| ${LAYERDIR}/recipes-*/*/*.bbappend" |
| |
| BBFILE_COLLECTIONS += "bsp" |
| BBFILE_PATTERN_bsp = "^${LAYERDIR}/" |
| BBFILE_PRIORITY_bsp = "6" |
| LAYERDEPENDS_bsp = "intel" |
| |
| To illustrate the string substitutions, here are the corresponding |
| statements from the Raspberry Pi ``conf/layer.conf`` file: :: |
| |
| # We have a conf and classes directory, append to BBPATH |
| BBPATH .= ":${LAYERDIR}" |
| |
| # We have a recipes directory containing .bb and .bbappend files, add to BBFILES |
| BBFILES += "${LAYERDIR}/recipes*/*/*.bb \ |
| ${LAYERDIR}/recipes*/*/*.bbappend" |
| |
| BBFILE_COLLECTIONS += "raspberrypi" |
| BBFILE_PATTERN_raspberrypi := "^${LAYERDIR}/" |
| BBFILE_PRIORITY_raspberrypi = "9" |
| |
| # Additional license directories. |
| LICENSE_PATH += "${LAYERDIR}/files/custom-licenses" |
| . |
| . |
| . |
| |
| This file simply makes :term:`BitBake` aware of the recipes and configuration |
| directories. The file must exist so that the OpenEmbedded build system can |
| recognize the BSP. |
| |
| .. _bsp-filelayout-machine: |
| |
| Hardware Configuration Options |
| ------------------------------ |
| |
| You can find these files in the BSP Layer at: :: |
| |
| meta-bsp_root_name/conf/machine/*.conf |
| |
| The machine files bind together all the information contained elsewhere |
| in the BSP into a format that the build system can understand. Each BSP |
| Layer requires at least one machine file. If the BSP supports multiple |
| machines, multiple machine configuration files can exist. These |
| filenames correspond to the values to which users have set the |
| :term:`MACHINE` variable. |
| |
| These files define things such as the kernel package to use |
| (:term:`PREFERRED_PROVIDER` of |
| :ref:`virtual/kernel <dev-manual/dev-manual-common-tasks:using virtual providers>`), |
| the hardware drivers to include in different types of images, any |
| special software components that are needed, any bootloader information, |
| and also any special image format requirements. |
| |
| This configuration file could also include a hardware "tuning" file that |
| is commonly used to define the package architecture and specify |
| optimization flags, which are carefully chosen to give best performance |
| on a given processor. |
| |
| Tuning files are found in the ``meta/conf/machine/include`` directory |
| within the :term:`Source Directory`. |
| For example, many ``tune-*`` files (e.g. ``tune-arm1136jf-s.inc``, |
| ``tune-1586-nlp.inc``, and so forth) reside in the |
| ``poky/meta/conf/machine/include`` directory. |
| |
| To use an include file, you simply include them in the machine |
| configuration file. For example, the Raspberry Pi BSP |
| ``raspberrypi3.conf`` contains the following statement: :: |
| |
| include conf/machine/include/rpi-base.inc |
| |
| .. _bsp-filelayout-misc-recipes: |
| |
| Miscellaneous BSP-Specific Recipe Files |
| --------------------------------------- |
| |
| You can find these files in the BSP Layer at: :: |
| |
| meta-bsp_root_name/recipes-bsp/* |
| |
| This optional directory contains miscellaneous recipe files for the BSP. |
| Most notably would be the formfactor files. For example, in the |
| Raspberry Pi BSP, there is the ``formfactor_0.0.bbappend`` file, which |
| is an append file used to augment the recipe that starts the build. |
| Furthermore, there are machine-specific settings used during the build |
| that are defined by the ``machconfig`` file further down in the |
| directory. Here is the ``machconfig`` file for the Raspberry Pi BSP: :: |
| |
| HAVE_TOUCHSCREEN=0 |
| HAVE_KEYBOARD=1 |
| |
| DISPLAY_CAN_ROTATE=0 |
| DISPLAY_ORIENTATION=0 |
| DISPLAY_DPI=133 |
| |
| .. note:: |
| |
| If a BSP does not have a formfactor entry, defaults are established |
| according to the formfactor configuration file that is installed by |
| the main formfactor recipe |
| ``meta/recipes-bsp/formfactor/formfactor_0.0.bb``, which is found in |
| the :term:`Source Directory`. |
| |
| .. _bsp-filelayout-recipes-graphics: |
| |
| Display Support Files |
| --------------------- |
| |
| You can find these files in the BSP Layer at: :: |
| |
| meta-bsp_root_name/recipes-graphics/* |
| |
| This optional directory contains recipes for the BSP if it has special |
| requirements for graphics support. All files that are needed for the BSP |
| to support a display are kept here. |
| |
| .. _bsp-filelayout-kernel: |
| |
| Linux Kernel Configuration |
| -------------------------- |
| |
| You can find these files in the BSP Layer at: :: |
| |
| meta-bsp_root_name/recipes-kernel/linux/linux*.bbappend |
| meta-bsp_root_name/recipes-kernel/linux/*.bb |
| |
| Append files (``*.bbappend``) modify the main kernel recipe being used |
| to build the image. The ``*.bb`` files would be a developer-supplied |
| kernel recipe. This area of the BSP hierarchy can contain both these |
| types of files although, in practice, it is likely that you would have |
| one or the other. |
| |
| For your BSP, you typically want to use an existing Yocto Project kernel |
| recipe found in the :term:`Source Directory` |
| at |
| ``meta/recipes-kernel/linux``. You can append machine-specific changes |
| to the kernel recipe by using a similarly named append file, which is |
| located in the BSP Layer for your target device (e.g. the |
| ``meta-bsp_root_name/recipes-kernel/linux`` directory). |
| |
| Suppose you are using the ``linux-yocto_4.4.bb`` recipe to build the |
| kernel. In other words, you have selected the kernel in your |
| bsp_root_name\ ``.conf`` file by adding |
| :term:`PREFERRED_PROVIDER` and :term:`PREFERRED_VERSION` |
| statements as follows: :: |
| |
| PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" |
| PREFERRED_VERSION_linux-yocto ?= "4.4%" |
| |
| .. note:: |
| |
| When the preferred provider is assumed by default, the ``PREFERRED_PROVIDER`` |
| statement does not appear in the ``bsp_root_name`` .conf file. |
| |
| You would use the ``linux-yocto_4.4.bbappend`` file to append specific |
| BSP settings to the kernel, thus configuring the kernel for your |
| particular BSP. |
| |
| You can find more information on what your append file should contain in |
| the ":ref:`kernel-dev/kernel-dev-common:creating the append file`" section |
| in the Yocto Project Linux Kernel Development Manual. |
| |
| An alternate scenario is when you create your own kernel recipe for the |
| BSP. A good example of this is the Raspberry Pi BSP. If you examine the |
| ``recipes-kernel/linux`` directory you see the following: :: |
| |
| linux-raspberrypi-dev.bb |
| linux-raspberrypi.inc |
| linux-raspberrypi_4.14.bb |
| linux-raspberrypi_4.9.bb |
| |
| The directory contains three kernel recipes and a common include file. |
| |
| Developing a Board Support Package (BSP) |
| ======================================== |
| |
| This section describes the high-level procedure you can follow to create |
| a BSP. Although not required for BSP creation, the ``meta-intel`` |
| repository, which contains many BSPs supported by the Yocto Project, is |
| part of the example. |
| |
| For an example that shows how to create a new layer using the tools, see |
| the ":ref:`bsp-guide/bsp:creating a new bsp layer using the \`\`bitbake-layers\`\` script`" |
| section. |
| |
| The following illustration and list summarize the BSP creation general |
| workflow. |
| |
| .. image:: figures/bsp-dev-flow.png |
| :align: center |
| |
| #. *Set up Your Host Development System to Support Development Using the |
| Yocto Project*: See the ":ref:`dev-manual/dev-manual-start:preparing the build host`" |
| section in the Yocto Project Development Tasks Manual for options on how to |
| get a system ready to use the Yocto Project. |
| |
| #. *Establish the meta-intel Repository on Your System:* Having |
| local copies of these supported BSP layers on your system gives you |
| access to layers you might be able to leverage when creating your |
| BSP. For information on how to get these files, see the |
| ":ref:`bsp-guide/bsp:preparing your build host to work with bsp layers`" |
| section. |
| |
| #. *Create Your Own BSP Layer Using the bitbake-layers Script:* |
| Layers are ideal for isolating and storing work for a given piece of |
| hardware. A layer is really just a location or area in which you |
| place the recipes and configurations for your BSP. In fact, a BSP is, |
| in itself, a special type of layer. The simplest way to create a new |
| BSP layer that is compliant with the Yocto Project is to use the |
| ``bitbake-layers`` script. For information about that script, see the |
| ":ref:`bsp-guide/bsp:creating a new bsp layer using the \`\`bitbake-layers\`\` script`" |
| section. |
| |
| Another example that illustrates a layer is an application. Suppose |
| you are creating an application that has library or other |
| dependencies in order for it to compile and run. The layer, in this |
| case, would be where all the recipes that define those dependencies |
| are kept. The key point for a layer is that it is an isolated area |
| that contains all the relevant information for the project that the |
| OpenEmbedded build system knows about. For more information on |
| layers, see the ":ref:`overview-manual/overview-manual-yp-intro:the yocto project layer model`" |
| section in the Yocto Project Overview and Concepts Manual. You can also |
| reference the ":ref:`dev-manual/dev-manual-common-tasks:understanding and creating layers`" |
| section in the Yocto Project Development Tasks Manual. For more |
| information on BSP layers, see the ":ref:`bsp-guide/bsp:bsp layers`" |
| section. |
| |
| .. note:: |
| |
| - Five hardware reference BSPs exist that are part of the Yocto |
| Project release and are located in the ``poky/meta-yocto-bsp`` |
| BSP layer: |
| |
| - Texas Instruments Beaglebone (``beaglebone-yocto``) |
| |
| - Ubiquiti Networks EdgeRouter Lite (``edgerouter``) |
| |
| - Two general IA platforms (``genericx86`` and ``genericx86-64``) |
| |
| - Three core Intel BSPs exist as part of the Yocto Project |
| release in the ``meta-intel`` layer: |
| |
| - ``intel-core2-32``, which is a BSP optimized for the Core2 |
| family of CPUs as well as all CPUs prior to the Silvermont |
| core. |
| |
| - ``intel-corei7-64``, which is a BSP optimized for Nehalem |
| and later Core and Xeon CPUs as well as Silvermont and later |
| Atom CPUs, such as the Baytrail SoCs. |
| |
| - ``intel-quark``, which is a BSP optimized for the Intel |
| Galileo gen1 & gen2 development boards. |
| |
| When you set up a layer for a new BSP, you should follow a standard |
| layout. This layout is described in the ":ref:`bsp-guide/bsp:example filesystem layout`" |
| section. In the standard layout, notice |
| the suggested structure for recipes and configuration information. |
| You can see the standard layout for a BSP by examining any supported |
| BSP found in the ``meta-intel`` layer inside the Source Directory. |
| |
| #. *Make Configuration Changes to Your New BSP Layer:* The standard BSP |
| layer structure organizes the files you need to edit in ``conf`` and |
| several ``recipes-*`` directories within the BSP layer. Configuration |
| changes identify where your new layer is on the local system and |
| identifies the kernel you are going to use. When you run the |
| ``bitbake-layers`` script, you are able to interactively configure |
| many things for the BSP (e.g. keyboard, touchscreen, and so forth). |
| |
| #. *Make Recipe Changes to Your New BSP Layer:* Recipe changes include |
| altering recipes (``*.bb`` files), removing recipes you do not use, |
| and adding new recipes or append files (``.bbappend``) that support |
| your hardware. |
| |
| #. *Prepare for the Build:* Once you have made all the changes to your |
| BSP layer, there remains a few things you need to do for the |
| OpenEmbedded build system in order for it to create your image. You |
| need to get the build environment ready by sourcing an environment |
| setup script (i.e. ``oe-init-build-env``) and you need to be sure two |
| key configuration files are configured appropriately: the |
| ``conf/local.conf`` and the ``conf/bblayers.conf`` file. You must |
| make the OpenEmbedded build system aware of your new layer. See the |
| ":ref:`dev-manual/dev-manual-common-tasks:enabling your layer`" |
| section in the Yocto Project Development Tasks Manual for information |
| on how to let the build system know about your new layer. |
| |
| #. *Build the Image:* The OpenEmbedded build system uses the BitBake |
| tool to build images based on the type of image you want to create. |
| You can find more information about BitBake in the |
| :doc:`BitBake User Manual <bitbake:index>`. |
| |
| The build process supports several types of images to satisfy |
| different needs. See the |
| ":ref:`ref-manual/ref-images:Images`" chapter in the Yocto |
| Project Reference Manual for information on supported images. |
| |
| Requirements and Recommendations for Released BSPs |
| ================================================== |
| |
| Certain requirements exist for a released BSP to be considered compliant |
| with the Yocto Project. Additionally, recommendations also exist. This |
| section describes the requirements and recommendations for released |
| BSPs. |
| |
| Released BSP Requirements |
| ------------------------- |
| |
| Before looking at BSP requirements, you should consider the following: |
| |
| - The requirements here assume the BSP layer is a well-formed, "legal" |
| layer that can be added to the Yocto Project. For guidelines on |
| creating a layer that meets these base requirements, see the |
| ":ref:`bsp-guide/bsp:bsp layers`" section in this manual and the |
| ":ref:`dev-manual/dev-manual-common-tasks:understanding and creating layers`" |
| section in the Yocto Project Development Tasks Manual. |
| |
| - The requirements in this section apply regardless of how you package |
| a BSP. You should consult the packaging and distribution guidelines |
| for your specific release process. For an example of packaging and |
| distribution requirements, see the "`Third Party BSP Release |
| Process <https://wiki.yoctoproject.org/wiki/Third_Party_BSP_Release_Process>`__" |
| wiki page. |
| |
| - The requirements for the BSP as it is made available to a developer |
| are completely independent of the released form of the BSP. For |
| example, the BSP Metadata can be contained within a Git repository |
| and could have a directory structure completely different from what |
| appears in the officially released BSP layer. |
| |
| - It is not required that specific packages or package modifications |
| exist in the BSP layer, beyond the requirements for general |
| compliance with the Yocto Project. For example, no requirement exists |
| dictating that a specific kernel or kernel version be used in a given |
| BSP. |
| |
| Following are the requirements for a released BSP that conform to the |
| Yocto Project: |
| |
| - *Layer Name:* The BSP must have a layer name that follows the Yocto |
| Project standards. For information on BSP layer names, see the |
| ":ref:`bsp-guide/bsp:bsp layers`" section. |
| |
| - *File System Layout:* When possible, use the same directory names in |
| your BSP layer as listed in the ``recipes.txt`` file, which is found |
| in ``poky/meta`` directory of the :term:`Source Directory` |
| or in the OpenEmbedded-Core Layer (``openembedded-core``) at |
| http://git.openembedded.org/openembedded-core/tree/meta. |
| |
| You should place recipes (``*.bb`` files) and recipe modifications |
| (``*.bbappend`` files) into ``recipes-*`` subdirectories by |
| functional area as outlined in ``recipes.txt``. If you cannot find a |
| category in ``recipes.txt`` to fit a particular recipe, you can make |
| up your own ``recipes-*`` subdirectory. |
| |
| Within any particular ``recipes-*`` category, the layout should match |
| what is found in the OpenEmbedded-Core Git repository |
| (``openembedded-core``) or the Source Directory (``poky``). In other |
| words, make sure you place related files in appropriately-related |
| ``recipes-*`` subdirectories specific to the recipe's function, or |
| within a subdirectory containing a set of closely-related recipes. |
| The recipes themselves should follow the general guidelines for |
| recipes used in the Yocto Project found in the "`OpenEmbedded Style |
| Guide <http://openembedded.org/wiki/Styleguide>`__". |
| |
| - *License File:* You must include a license file in the |
| ``meta-bsp_root_name`` directory. This license covers the BSP |
| Metadata as a whole. You must specify which license to use since no |
| default license exists when one is not specified. See the |
| :yocto_git:`COPYING.MIT </cgit.cgi/meta-raspberrypi/tree/COPYING.MIT>` |
| file for the Raspberry Pi BSP in the ``meta-raspberrypi`` BSP layer |
| as an example. |
| |
| - *README File:* You must include a ``README`` file in the |
| ``meta-bsp_root_name`` directory. See the |
| :yocto_git:`README.md </cgit.cgi/meta-raspberrypi/tree/README.md>` |
| file for the Raspberry Pi BSP in the ``meta-raspberrypi`` BSP layer |
| as an example. |
| |
| At a minimum, the ``README`` file should contain the following: |
| |
| - A brief description of the target hardware. |
| |
| - A list of all the dependencies of the BSP. These dependencies are |
| typically a list of required layers needed to build the BSP. |
| However, the dependencies should also contain information |
| regarding any other dependencies the BSP might have. |
| |
| - Any required special licensing information. For example, this |
| information includes information on special variables needed to |
| satisfy a EULA, or instructions on information needed to build or |
| distribute binaries built from the BSP Metadata. |
| |
| - The name and contact information for the BSP layer maintainer. |
| This is the person to whom patches and questions should be sent. |
| For information on how to find the right person, see the |
| ":ref:`dev-manual/dev-manual-common-tasks:submitting a change to the yocto project`" |
| section in the Yocto Project Development Tasks Manual. |
| |
| - Instructions on how to build the BSP using the BSP layer. |
| |
| - Instructions on how to boot the BSP build from the BSP layer. |
| |
| - Instructions on how to boot the binary images contained in the |
| ``binary`` directory, if present. |
| |
| - Information on any known bugs or issues that users should know |
| about when either building or booting the BSP binaries. |
| |
| - *README.sources File:* If your BSP contains binary images in the |
| ``binary`` directory, you must include a ``README.sources`` file in |
| the ``meta-bsp_root_name`` directory. This file specifies exactly |
| where you can find the sources used to generate the binary images. |
| |
| - *Layer Configuration File:* You must include a ``conf/layer.conf`` |
| file in the ``meta-bsp_root_name`` directory. This file identifies |
| the ``meta-bsp_root_name`` BSP layer as a layer to the build |
| system. |
| |
| - *Machine Configuration File:* You must include one or more |
| ``conf/machine/bsp_root_name.conf`` files in the |
| ``meta-bsp_root_name`` directory. These configuration files define |
| machine targets that can be built using the BSP layer. Multiple |
| machine configuration files define variations of machine |
| configurations that the BSP supports. If a BSP supports multiple |
| machine variations, you need to adequately describe each variation in |
| the BSP ``README`` file. Do not use multiple machine configuration |
| files to describe disparate hardware. If you do have very different |
| targets, you should create separate BSP layers for each target. |
| |
| .. note:: |
| |
| It is completely possible for a developer to structure the working |
| repository as a conglomeration of unrelated BSP files, and to possibly |
| generate BSPs targeted for release from that directory using scripts or |
| some other mechanism (e.g. ``meta-yocto-bsp`` layer). Such considerations |
| are outside the scope of this document. |
| |
| Released BSP Recommendations |
| ---------------------------- |
| |
| Following are recommendations for released BSPs that conform to the |
| Yocto Project: |
| |
| - *Bootable Images:* Released BSPs can contain one or more bootable |
| images. Including bootable images allows users to easily try out the |
| BSP using their own hardware. |
| |
| In some cases, it might not be convenient to include a bootable |
| image. If so, you might want to make two versions of the BSP |
| available: one that contains binary images, and one that does not. |
| The version that does not contain bootable images avoids unnecessary |
| download times for users not interested in the images. |
| |
| If you need to distribute a BSP and include bootable images or build |
| kernel and filesystems meant to allow users to boot the BSP for |
| evaluation purposes, you should put the images and artifacts within a |
| ``binary/`` subdirectory located in the ``meta-bsp_root_name`` |
| directory. |
| |
| .. note:: |
| |
| If you do include a bootable image as part of the BSP and the |
| image was built by software covered by the GPL or other open |
| source licenses, it is your responsibility to understand and meet |
| all licensing requirements, which could include distribution of |
| source files. |
| |
| - *Use a Yocto Linux Kernel:* Kernel recipes in the BSP should be based |
| on a Yocto Linux kernel. Basing your recipes on these kernels reduces |
| the costs for maintaining the BSP and increases its scalability. See |
| the ``Yocto Linux Kernel`` category in the |
| :yocto_git:`Source Repositories <>` for these kernels. |
| |
| Customizing a Recipe for a BSP |
| ============================== |
| |
| If you plan on customizing a recipe for a particular BSP, you need to do |
| the following: |
| |
| - Create a ``*.bbappend`` file for the modified recipe. For information on using |
| append files, see the ":ref:`dev-manual/dev-manual-common-tasks:using |
| .bbappend files in your layer`" section in the Yocto Project Development |
| Tasks Manual. |
| |
| - Ensure your directory structure in the BSP layer that supports your |
| machine is such that the OpenEmbedded build system can find it. See |
| the example later in this section for more information. |
| |
| - Put the append file in a directory whose name matches the machine's |
| name and is located in an appropriate sub-directory inside the BSP |
| layer (i.e. ``recipes-bsp``, ``recipes-graphics``, ``recipes-core``, |
| and so forth). |
| |
| - Place the BSP-specific files in the proper directory inside the BSP |
| layer. How expansive the layer is affects where you must place these |
| files. For example, if your layer supports several different machine |
| types, you need to be sure your layer's directory structure includes |
| hierarchy that separates the files according to machine. If your |
| layer does not support multiple machines, the layer would not have |
| that additional hierarchy and the files would obviously not be able |
| to reside in a machine-specific directory. |
| |
| Following is a specific example to help you better understand the |
| process. This example customizes customizes a recipe by adding a |
| BSP-specific configuration file named ``interfaces`` to the |
| ``init-ifupdown_1.0.bb`` recipe for machine "xyz" where the BSP layer |
| also supports several other machines: |
| |
| #. Edit the ``init-ifupdown_1.0.bbappend`` file so that it contains the |
| following: :: |
| |
| FILESEXTRAPATHS_prepend := "${THISDIR}/files:" |
| |
| The append file needs to be in the ``meta-xyz/recipes-core/init-ifupdown`` |
| directory. |
| |
| #. Create and place the new ``interfaces`` configuration file in the |
| BSP's layer here: :: |
| |
| meta-xyz/recipes-core/init-ifupdown/files/xyz-machine-one/interfaces |
| |
| .. note:: |
| |
| If the meta-xyz layer did not support multiple machines, you would place |
| the interfaces configuration file in the layer here: :: |
| |
| meta-xyz/recipes-core/init-ifupdown/files/interfaces |
| |
| The :term:`FILESEXTRAPATHS` variable in the append files extends the search |
| path the build system uses to find files during the build. Consequently, for |
| this example you need to have the ``files`` directory in the same location as |
| your append file. |
| |
| BSP Licensing Considerations |
| ============================ |
| |
| In some cases, a BSP contains separately-licensed Intellectual Property |
| (IP) for a component or components. For these cases, you are required to |
| accept the terms of a commercial or other type of license that requires |
| some kind of explicit End User License Agreement (EULA). Once you accept |
| the license, the OpenEmbedded build system can then build and include |
| the corresponding component in the final BSP image. If the BSP is |
| available as a pre-built image, you can download the image after |
| agreeing to the license or EULA. |
| |
| You could find that some separately-licensed components that are |
| essential for normal operation of the system might not have an |
| unencumbered (or free) substitute. Without these essential components, |
| the system would be non-functional. Then again, you might find that |
| other licensed components that are simply 'good-to-have' or purely |
| elective do have an unencumbered, free replacement component that you |
| can use rather than agreeing to the separately-licensed component. Even |
| for components essential to the system, you might find an unencumbered |
| component that is not identical but will work as a less-capable version |
| of the licensed version in the BSP recipe. |
| |
| For cases where you can substitute a free component and still maintain |
| the system's functionality, the "DOWNLOADS" selection from the |
| "SOFTWARE" tab on the :yocto_home:`Yocto Project Website <>` makes |
| available de-featured BSPs that are completely free of any IP |
| encumbrances. For these cases, you can use the substitution directly and |
| without any further licensing requirements. If present, these fully |
| de-featured BSPs are named appropriately different as compared to the |
| names of their respective encumbered BSPs. If available, these |
| substitutions are your simplest and most preferred options. Obviously, |
| use of these substitutions assumes the resulting functionality meets |
| system requirements. |
| |
| .. note:: |
| |
| If however, a non-encumbered version is unavailable or it provides |
| unsuitable functionality or quality, you can use an encumbered |
| version. |
| |
| A couple different methods exist within the OpenEmbedded build system to |
| satisfy the licensing requirements for an encumbered BSP. The following |
| list describes them in order of preference: |
| |
| #. *Use the LICENSE_FLAGS Variable to Define the Recipes that Have Commercial or |
| Other Types of Specially-Licensed Packages:* For each of those recipes, you can |
| specify a matching license string in a ``local.conf`` variable named |
| :term:`LICENSE_FLAGS_WHITELIST`. |
| Specifying the matching license string signifies that you agree to |
| the license. Thus, the build system can build the corresponding |
| recipe and include the component in the image. See the |
| ":ref:`dev-manual/dev-manual-common-tasks:enabling commercially licensed recipes`" |
| section in the Yocto Project Development Tasks Manual for details on |
| how to use these variables. |
| |
| If you build as you normally would, without specifying any recipes in |
| the ``LICENSE_FLAGS_WHITELIST``, the build stops and provides you |
| with the list of recipes that you have tried to include in the image |
| that need entries in the ``LICENSE_FLAGS_WHITELIST``. Once you enter |
| the appropriate license flags into the whitelist, restart the build |
| to continue where it left off. During the build, the prompt will not |
| appear again since you have satisfied the requirement. |
| |
| Once the appropriate license flags are on the white list in the |
| ``LICENSE_FLAGS_WHITELIST`` variable, you can build the encumbered |
| image with no change at all to the normal build process. |
| |
| #. *Get a Pre-Built Version of the BSP:* You can get this type of BSP by |
| selecting the "DOWNLOADS" item from the "SOFTWARE" tab on the |
| :yocto_home:`Yocto Project website <>`. You can download BSP tarballs |
| that contain proprietary components after agreeing to the licensing |
| requirements of each of the individually encumbered packages as part |
| of the download process. Obtaining the BSP this way allows you to |
| access an encumbered image immediately after agreeing to the |
| click-through license agreements presented by the website. If you |
| want to build the image yourself using the recipes contained within |
| the BSP tarball, you will still need to create an appropriate |
| ``LICENSE_FLAGS_WHITELIST`` to match the encumbered recipes in the |
| BSP. |
| |
| .. note:: |
| |
| Pre-compiled images are bundled with a time-limited kernel that runs |
| for a predetermined amount of time (10 days) before it forces the |
| system to reboot. This limitation is meant to discourage direct |
| redistribution of the image. You must eventually rebuild the image if |
| you want to remove this restriction. |
| |
| Creating a new BSP Layer Using the ``bitbake-layers`` Script |
| ============================================================ |
| |
| The ``bitbake-layers create-layer`` script automates creating a BSP |
| layer. What makes a layer a "BSP layer" is the presence of at least one |
| machine configuration file. Additionally, a BSP layer usually has a |
| kernel recipe or an append file that leverages off an existing kernel |
| recipe. The primary requirement, however, is the machine configuration. |
| |
| Use these steps to create a BSP layer: |
| |
| - *Create a General Layer:* Use the ``bitbake-layers`` script with the |
| ``create-layer`` subcommand to create a new general layer. For |
| instructions on how to create a general layer using the |
| ``bitbake-layers`` script, see the |
| ":ref:`dev-manual/dev-manual-common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script`" |
| section in the Yocto Project Development Tasks Manual. |
| |
| - *Create a Layer Configuration File:* Every layer needs a layer |
| configuration file. This configuration file establishes locations for |
| the layer's recipes, priorities for the layer, and so forth. You can |
| find examples of ``layer.conf`` files in the Yocto Project |
| :yocto_git:`Source Repositories <>`. To get examples of what you need |
| in your configuration file, locate a layer (e.g. "meta-ti") and |
| examine the |
| :yocto_git:`local.conf </cgit/cgit.cgi/meta-ti/tree/conf/layer.conf>` |
| file. |
| |
| - *Create a Machine Configuration File:* Create a |
| ``conf/machine/bsp_root_name.conf`` file. See |
| :yocto_git:`meta-yocto-bsp/conf/machine </cgit/cgit.cgi/poky/tree/meta-yocto-bsp/conf/machine>` |
| for sample ``bsp_root_name.conf`` files. Other samples such as |
| :yocto_git:`meta-ti </cgit/cgit.cgi/meta-ti/tree/conf/machine>` |
| and |
| :yocto_git:`meta-freescale </cgit/cgit.cgi/meta-freescale/tree/conf/machine>` |
| exist from other vendors that have more specific machine and tuning |
| examples. |
| |
| - *Create a Kernel Recipe:* Create a kernel recipe in |
| ``recipes-kernel/linux`` by either using a kernel append file or a |
| new custom kernel recipe file (e.g. ``yocto-linux_4.12.bb``). The BSP |
| layers mentioned in the previous step also contain different kernel |
| examples. See the ":ref:`kernel-dev/kernel-dev-common:modifying an existing recipe`" |
| section in the Yocto Project Linux Kernel Development Manual for |
| information on how to create a custom kernel. |
| |
| The remainder of this section provides a description of the Yocto |
| Project reference BSP for Beaglebone, which resides in the |
| :yocto_git:`meta-yocto-bsp </cgit/cgit.cgi/poky/tree/meta-yocto-bsp>` |
| layer. |
| |
| BSP Layer Configuration Example |
| ------------------------------- |
| |
| The layer's ``conf`` directory contains the ``layer.conf`` configuration |
| file. In this example, the ``conf/layer.conf`` is the following: :: |
| |
| # We have a conf and classes directory, add to BBPATH |
| BBPATH .= ":${LAYERDIR}" |
| |
| # We have recipes-\* directories, add to BBFILES |
| BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ |
| ${LAYERDIR}/recipes-*/*/*.bbappend" |
| |
| BBFILE_COLLECTIONS += "yoctobsp" |
| BBFILE_PATTERN_yoctobsp = "^${LAYERDIR}/" |
| BBFILE_PRIORITY_yoctobsp = "5" |
| LAYERVERSION_yoctobsp = "4" |
| LAYERSERIES_COMPAT_yoctobsp = "&DISTRO_NAME_NO_CAP;" |
| |
| The variables used in this file configure the layer. A good way to learn about layer |
| configuration files is to examine various files for BSP from the |
| :yocto_git:`Source Repositories <>`. |
| |
| For a detailed description of this particular layer configuration file, |
| see ":ref:`step 3 <dev-manual/dev-manual-common-tasks:creating your own layer>`" |
| in the discussion that describes how to create layers in the Yocto |
| Project Development Tasks Manual. |
| |
| BSP Machine Configuration Example |
| --------------------------------- |
| |
| As mentioned earlier in this section, the existence of a machine |
| configuration file is what makes a layer a BSP layer as compared to a |
| general or kernel layer. |
| |
| One or more machine configuration files exist in the |
| ``bsp_layer/conf/machine/`` directory of the layer: :: |
| |
| bsp_layer/conf/machine/machine1\.conf`` |
| bsp_layer/conf/machine/machine2\.conf`` |
| bsp_layer/conf/machine/machine3\.conf`` |
| ... more ... |
| |
| For example, the machine configuration file for the `BeagleBone and |
| BeagleBone Black development boards <http://beagleboard.org/bone>`__ is |
| located in the layer ``poky/meta-yocto-bsp/conf/machine`` and is named |
| ``beaglebone-yocto.conf``: :: |
| |
| #@TYPE: Machine |
| #@NAME: Beaglebone-yocto machine |
| #@DESCRIPTION: Reference machine configuration for http://beagleboard.org/bone and http://beagleboard.org/black boards |
| |
| PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" |
| XSERVER ?= "xserver-xorg \ |
| xf86-video-modesetting \ |
| " |
| |
| MACHINE_EXTRA_RRECOMMENDS = "kernel-modules kernel-devicetree" |
| |
| EXTRA_IMAGEDEPENDS += "u-boot" |
| |
| DEFAULTTUNE ?= "cortexa8hf-neon" |
| include conf/machine/include/tune-cortexa8.inc |
| |
| IMAGE_FSTYPES += "tar.bz2 jffs2 wic wic.bmap" |
| EXTRA_IMAGECMD_jffs2 = "-lnp " |
| WKS_FILE ?= "beaglebone-yocto.wks" |
| IMAGE_INSTALL_append = " kernel-devicetree kernel-image-zimage" |
| do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot" |
| |
| SERIAL_CONSOLES ?= "115200;ttyS0 115200;ttyO0" |
| SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" |
| |
| PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" |
| PREFERRED_VERSION_linux-yocto ?= "5.0%" |
| |
| KERNEL_IMAGETYPE = "zImage" |
| KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb" |
| KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" |
| |
| SPL_BINARY = "MLO" |
| UBOOT_SUFFIX = "img" |
| UBOOT_MACHINE = "am335x_evm_defconfig" |
| UBOOT_ENTRYPOINT = "0x80008000" |
| UBOOT_LOADADDRESS = "0x80008000" |
| |
| MACHINE_FEATURES = "usbgadget usbhost vfat alsa" |
| |
| IMAGE_BOOT_FILES ?= "u-boot.${UBOOT_SUFFIX} MLO zImage am335x-bone.dtb am335x-boneblack.dtb am335x-bonegreen.dtb" |
| |
| The variables used to configure the machine define machine-specific properties; for |
| example, machine-dependent packages, machine tunings, the type of kernel |
| to build, and U-Boot configurations. |
| |
| The following list provides some explanation for the statements found in |
| the example reference machine configuration file for the BeagleBone |
| development boards. Realize that much more can be defined as part of a |
| machine's configuration file. In general, you can learn about related |
| variables that this example does not have by locating the variables in |
| the ":ref:`ref-manual/ref-variables:variables glossary`" in the Yocto |
| Project Reference Manual. |
| |
| - :term:`PREFERRED_PROVIDER_virtual/xserver <PREFERRED_PROVIDER>`: |
| The recipe that provides "virtual/xserver" when more than one |
| provider is found. In this case, the recipe that provides |
| "virtual/xserver" is "xserver-xorg", which exists in |
| ``poky/meta/recipes-graphics/xorg-xserver``. |
| |
| - :term:`XSERVER`: The packages that |
| should be installed to provide an X server and drivers for the |
| machine. In this example, the "xserver-xorg" and |
| "xf86-video-modesetting" are installed. |
| |
| - :term:`MACHINE_EXTRA_RRECOMMENDS`: |
| A list of machine-dependent packages not essential for booting the |
| image. Thus, the build does not fail if the packages do not exist. |
| However, the packages are required for a fully-featured image. |
| |
| .. tip:: |
| |
| Many ``MACHINE\*`` variables exist that help you configure a particular piece |
| of hardware. |
| |
| - :term:`EXTRA_IMAGEDEPENDS`: |
| Recipes to build that do not provide packages for installing into the |
| root filesystem but building the image depends on the recipes. |
| Sometimes a recipe is required to build the final image but is not |
| needed in the root filesystem. In this case, the U-Boot recipe must |
| be built for the image. |
| |
| - :term:`DEFAULTTUNE`: Machines |
| use tunings to optimize machine, CPU, and application performance. |
| These features, which are collectively known as "tuning features", |
| exist in the :term:`OpenEmbedded-Core (OE-Core)` layer (e.g. |
| ``poky/meta/conf/machine/include``). In this example, the default |
| tunning file is "cortexa8hf-neon". |
| |
| .. note:: |
| |
| The include statement that pulls in the |
| conf/machine/include/tune-cortexa8.inc file provides many tuning |
| possibilities. |
| |
| - :term:`IMAGE_FSTYPES`: The |
| formats the OpenEmbedded build system uses during the build when |
| creating the root filesystem. In this example, four types of images |
| are supported. |
| |
| - :term:`EXTRA_IMAGECMD`: |
| Specifies additional options for image creation commands. In this |
| example, the "-lnp " option is used when creating the |
| `JFFS2 <https://en.wikipedia.org/wiki/JFFS2>`__ image. |
| |
| - :term:`WKS_FILE`: The location of |
| the :ref:`Wic kickstart <ref-manual/ref-kickstart:openembedded kickstart (\`\`.wks\`\`) reference>` file used |
| by the OpenEmbedded build system to create a partitioned image |
| (image.wic). |
| |
| - :term:`IMAGE_INSTALL`: |
| Specifies packages to install into an image through the |
| :ref:`image <ref-classes-image>` class. Recipes |
| use the ``IMAGE_INSTALL`` variable. |
| |
| - ``do_image_wic[depends]``: A task that is constructed during the |
| build. In this example, the task depends on specific tools in order |
| to create the sysroot when buiding a Wic image. |
| |
| - :term:`SERIAL_CONSOLES`: |
| Defines a serial console (TTY) to enable using getty. In this case, |
| the baud rate is "115200" and the device name is "ttyO0". |
| |
| - :term:`PREFERRED_PROVIDER_virtual/kernel <PREFERRED_PROVIDER>`: |
| Specifies the recipe that provides "virtual/kernel" when more than |
| one provider is found. In this case, the recipe that provides |
| "virtual/kernel" is "linux-yocto", which exists in the layer's |
| ``recipes-kernel/linux`` directory. |
| |
| - :term:`PREFERRED_VERSION_linux-yocto <PREFERRED_VERSION>`: |
| Defines the version of the recipe used to build the kernel, which is |
| "5.0" in this case. |
| |
| - :term:`KERNEL_IMAGETYPE`: |
| The type of kernel to build for the device. In this case, the |
| OpenEmbedded build system creates a "zImage" image type. |
| |
| - :term:`KERNEL_DEVICETREE`: |
| The names of the generated Linux kernel device trees (i.e. the |
| ``*.dtb``) files. All the device trees for the various BeagleBone |
| devices are included. |
| |
| - :term:`KERNEL_EXTRA_ARGS`: |
| Additional ``make`` command-line arguments the OpenEmbedded build |
| system passes on when compiling the kernel. In this example, |
| ``LOADADDR=${UBOOT_ENTRYPOINT}`` is passed as a command-line argument. |
| |
| - :term:`SPL_BINARY`: Defines the |
| Secondary Program Loader (SPL) binary type. In this case, the SPL |
| binary is set to "MLO", which stands for Multimedia card LOader. |
| |
| The BeagleBone development board requires an SPL to boot and that SPL |
| file type must be MLO. Consequently, the machine configuration needs |
| to define ``SPL_BINARY`` as ``MLO``. |
| |
| .. note:: |
| |
| For more information on how the SPL variables are used, see the u-boot.inc |
| include file. |
| |
| - :term:`UBOOT_* <UBOOT_ENTRYPOINT>`: Defines |
| various U-Boot configurations needed to build a U-Boot image. In this |
| example, a U-Boot image is required to boot the BeagleBone device. |
| See the following variables for more information: |
| |
| - :term:`UBOOT_SUFFIX`: |
| Points to the generated U-Boot extension. |
| |
| - :term:`UBOOT_MACHINE`: |
| Specifies the value passed on the make command line when building |
| a U-Boot image. |
| |
| - :term:`UBOOT_ENTRYPOINT`: |
| Specifies the entry point for the U-Boot image. |
| |
| - :term:`UBOOT_LOADADDRESS`: |
| Specifies the load address for the U-Boot image. |
| |
| - :term:`MACHINE_FEATURES`: |
| Specifies the list of hardware features the BeagleBone device is |
| capable of supporting. In this case, the device supports "usbgadget |
| usbhost vfat alsa". |
| |
| - :term:`IMAGE_BOOT_FILES`: |
| Files installed into the device's boot partition when preparing the |
| image using the Wic tool with the ``bootimg-partition`` or |
| ``bootimg-efi`` source plugin. |
| |
| BSP Kernel Recipe Example |
| ------------------------- |
| |
| The kernel recipe used to build the kernel image for the BeagleBone |
| device was established in the machine configuration: :: |
| |
| PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" |
| PREFERRED_VERSION_linux-yocto ?= "5.0%" |
| |
| The ``meta-yocto-bsp/recipes-kernel/linux`` directory in the layer contains |
| metadata used to build the kernel. In this case, a kernel append file |
| (i.e. ``linux-yocto_5.0.bbappend``) is used to override an established |
| kernel recipe (i.e. ``linux-yocto_5.0.bb``), which is located in |
| https://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-kernel/linux. |
| |
| Following is the contents of the append file: :: |
| |
| KBRANCH_genericx86 = "v5.0/standard/base" |
| KBRANCH_genericx86-64 = "v5.0/standard/base" |
| KBRANCH_edgerouter = "v5.0/standard/edgerouter" |
| KBRANCH_beaglebone-yocto = "v5.0/standard/beaglebone" |
| |
| KMACHINE_genericx86 ?= "common-pc" |
| KMACHINE_genericx86-64 ?= "common-pc-64" |
| KMACHINE_beaglebone-yocto ?= "beaglebone" |
| |
| SRCREV_machine_genericx86 ?= "3df4aae6074e94e794e27fe7f17451d9353cdf3d" |
| SRCREV_machine_genericx86-64 ?= "3df4aae6074e94e794e27fe7f17451d9353cdf3d" |
| SRCREV_machine_edgerouter ?= "3df4aae6074e94e794e27fe7f17451d9353cdf3d" |
| SRCREV_machine_beaglebone-yocto ?= "3df4aae6074e94e794e27fe7f17451d9353cdf3d" |
| |
| COMPATIBLE_MACHINE_genericx86 = "genericx86" |
| COMPATIBLE_MACHINE_genericx86-64 = "genericx86-64" |
| COMPATIBLE_MACHINE_edgerouter = "edgerouter" |
| COMPATIBLE_MACHINE_beaglebone-yocto = "beaglebone-yocto" |
| |
| LINUX_VERSION_genericx86 = "5.0.3" |
| LINUX_VERSION_genericx86-64 = "5.0.3" |
| LINUX_VERSION_edgerouter = "5.0.3" |
| LINUX_VERSION_beaglebone-yocto = "5.0.3" |
| |
| This particular append file works for all the machines that are |
| part of the ``meta-yocto-bsp`` layer. The relevant statements are |
| appended with the "beaglebone-yocto" string. The OpenEmbedded build |
| system uses these statements to override similar statements in the |
| kernel recipe: |
| |
| - :term:`KBRANCH`: Identifies the |
| kernel branch that is validated, patched, and configured during the |
| build. |
| |
| - :term:`KMACHINE`: Identifies the |
| machine name as known by the kernel, which is sometimes a different |
| name than what is known by the OpenEmbedded build system. |
| |
| - :term:`SRCREV`: Identifies the |
| revision of the source code used to build the image. |
| |
| - :term:`COMPATIBLE_MACHINE`: |
| A regular expression that resolves to one or more target machines |
| with which the recipe is compatible. |
| |
| - :term:`LINUX_VERSION`: The |
| Linux version from kernel.org used by the OpenEmbedded build system |
| to build the kernel image. |