poky/documentation/ref-manual/migration-1.3.rst - mdmillerii/openbmc - Gitiles

 .. SPDX-License-Identifier: CC-BY-SA-2.0-UK

 Moving to the Yocto Project 1.3 Release
 =======================================

 This section provides migration information for moving to the Yocto
 Project 1.3 Release from the prior release.

 .. _1.3-local-configuration:

 Local Configuration
 -------------------

 Differences include changes for
 :term:`SSTATE_MIRRORS` and ``bblayers.conf``.

 .. _migration-1.3-sstate-mirrors:

 SSTATE_MIRRORS
 ~~~~~~~~~~~~~~

 The shared state cache (sstate-cache), as pointed to by
 :term:`SSTATE_DIR`, by default now has two-character
 subdirectories to prevent issues arising from too many files in the same
 directory. Also, native sstate-cache packages, which are built to run on
 the host system, will go into a subdirectory named using the distro ID
 string. If you copy the newly structured sstate-cache to a mirror
 location (either local or remote) and then point to it in
 :term:`SSTATE_MIRRORS`, you need to append "PATH"
 to the end of the mirror URL so that the path used by BitBake before the
 mirror substitution is appended to the path used to access the mirror.
 Here is an example: ::

    SSTATE_MIRRORS = "file://.* http://someserver.tld/share/sstate/PATH"

 .. _migration-1.3-bblayers-conf:

 bblayers.conf
 ~~~~~~~~~~~~~

 The ``meta-yocto`` layer consists of two parts that correspond to the
 Poky reference distribution and the reference hardware Board Support
 Packages (BSPs), respectively: ``meta-yocto`` and ``meta-yocto-bsp``.
 When running BitBake for the first time after upgrading, your
 ``conf/bblayers.conf`` file will be updated to handle this change and
 you will be asked to re-run or restart for the changes to take effect.

 .. _1.3-recipes:

 Recipes
 -------

 Differences include changes for the following:

 .. _migration-1.3-python-function-whitespace:

 Python Function Whitespace
 ~~~~~~~~~~~~~~~~~~~~~~~~~~

 All Python functions must now use four spaces for indentation.
 Previously, an inconsistent mix of spaces and tabs existed, which made
 extending these functions using ``_append`` or ``_prepend`` complicated
 given that Python treats whitespace as syntactically significant. If you
 are defining or extending any Python functions (e.g.
 ``populate_packages``, ``do_unpack``, ``do_patch`` and so forth) in
 custom recipes or classes, you need to ensure you are using consistent
 four-space indentation.

 .. _migration-1.3-proto=-in-src-uri:

 proto= in SRC_URI
 ~~~~~~~~~~~~~~~~~

 Any use of ``proto=`` in :term:`SRC_URI` needs to be
 changed to ``protocol=``. In particular, this applies to the following
 URIs:

 -  ``svn://``

 -  ``bzr://``

 -  ``hg://``

 -  ``osc://``

 Other URIs were already using ``protocol=``. This change improves
 consistency.

 .. _migration-1.3-nativesdk:

 nativesdk
 ~~~~~~~~~

 The suffix ``nativesdk`` is now implemented as a prefix, which
 simplifies a lot of the packaging code for ``nativesdk`` recipes. All
 custom ``nativesdk`` recipes, which are relocatable packages that are
 native to :term:`SDK_ARCH`, and any references need to
 be updated to use ``nativesdk-*`` instead of ``*-nativesdk``.

 .. _migration-1.3-task-recipes:

 Task Recipes
 ~~~~~~~~~~~~

 "Task" recipes are now known as "Package groups" and have been renamed
 from ``task-*.bb`` to ``packagegroup-*.bb``. Existing references to the
 previous ``task-*`` names should work in most cases as there is an
 automatic upgrade path for most packages. However, you should update
 references in your own recipes and configurations as they could be
 removed in future releases. You should also rename any custom ``task-*``
 recipes to ``packagegroup-*``, and change them to inherit
 ``packagegroup`` instead of ``task``, as well as taking the opportunity
 to remove anything now handled by ``packagegroup.bbclass``, such as
 providing ``-dev`` and ``-dbg`` packages, setting
 :term:`LIC_FILES_CHKSUM`, and so forth. See the
 ":ref:`packagegroup.bbclass <ref-classes-packagegroup>`" section for
 further details.

 .. _migration-1.3-image-features:

 IMAGE_FEATURES
 ~~~~~~~~~~~~~~

 Image recipes that previously included ``apps-console-core`` in
 :term:`IMAGE_FEATURES` should now include ``splash``
 instead to enable the boot-up splash screen. Retaining
 ``apps-console-core`` will still include the splash screen but generates a
 warning. The ``apps-x11-core`` and ``apps-x11-games`` ``IMAGE_FEATURES``
 features have been removed.

 .. _migration-1.3-removed-recipes:

 Removed Recipes
 ~~~~~~~~~~~~~~~

 The following recipes have been removed. For most of them, it is
 unlikely that you would have any references to them in your own
 :term:`Metadata`. However, you should check your metadata
 against this list to be sure:

 -  ``libx11-trim``: Replaced by ``libx11``, which has a negligible
    size difference with modern Xorg.

 -  ``xserver-xorg-lite``: Use ``xserver-xorg``, which has a negligible
    size difference when DRI and GLX modules are not installed.

 -  ``xserver-kdrive``: Effectively unmaintained for many years.

 -  ``mesa-xlib``: No longer serves any purpose.

 -  ``galago``: Replaced by telepathy.

 -  ``gail``: Functionality was integrated into GTK+ 2.13.

 -  ``eggdbus``: No longer needed.

 -  ``gcc-*-intermediate``: The build has been restructured to avoid
    the need for this step.

 -  ``libgsmd``: Unmaintained for many years. Functionality now
    provided by ``ofono`` instead.

 -  *contacts, dates, tasks, eds-tools*: Largely unmaintained PIM
    application suite. It has been moved to ``meta-gnome`` in
    ``meta-openembedded``.

 In addition to the previously listed changes, the ``meta-demoapps``
 directory has also been removed because the recipes in it were not being
 maintained and many had become obsolete or broken. Additionally, these
 recipes were not parsed in the default configuration. Many of these
 recipes are already provided in an updated and maintained form within
 the OpenEmbedded community layers such as ``meta-oe`` and
 ``meta-gnome``. For the remainder, you can now find them in the
 ``meta-extras`` repository, which is in the
 :yocto_git:`Source Repositories <>` at
 :yocto_git:`/cgit/cgit.cgi/meta-extras/`.

 .. _1.3-linux-kernel-naming:

 Linux Kernel Naming
 -------------------

 The naming scheme for kernel output binaries has been changed to now
 include :term:`PE` as part of the filename:
 ::

    KERNEL_IMAGE_BASE_NAME ?= "${KERNEL_IMAGETYPE}-${PE}-${PV}-${PR}-${MACHINE}-${DATETIME}"

 Because the ``PE`` variable is not set by default, these binary files
 could result with names that include two dash characters. Here is an
 example: ::

    bzImage--3.10.9+git0+cd502a8814_7144bcc4b8-r0-qemux86-64-20130830085431.bin
	.. SPDX-License-Identifier: CC-BY-SA-2.0-UK

	Moving to the Yocto Project 1.3 Release
	=======================================

	This section provides migration information for moving to the Yocto
	Project 1.3 Release from the prior release.

	.. _1.3-local-configuration:

	Local Configuration
	-------------------

	Differences include changes for
	:term:`SSTATE_MIRRORS` and ``bblayers.conf``.

	.. _migration-1.3-sstate-mirrors:

	SSTATE_MIRRORS
	~~~~~~~~~~~~~~

	The shared state cache (sstate-cache), as pointed to by
	:term:`SSTATE_DIR`, by default now has two-character
	subdirectories to prevent issues arising from too many files in the same
	directory. Also, native sstate-cache packages, which are built to run on
	the host system, will go into a subdirectory named using the distro ID
	string. If you copy the newly structured sstate-cache to a mirror
	location (either local or remote) and then point to it in
	:term:`SSTATE_MIRRORS`, you need to append "PATH"
	to the end of the mirror URL so that the path used by BitBake before the
	mirror substitution is appended to the path used to access the mirror.
	Here is an example: ::

	SSTATE_MIRRORS = "file://.* http://someserver.tld/share/sstate/PATH"

	.. _migration-1.3-bblayers-conf:

	bblayers.conf
	~~~~~~~~~~~~~

	The ``meta-yocto`` layer consists of two parts that correspond to the
	Poky reference distribution and the reference hardware Board Support
	Packages (BSPs), respectively: ``meta-yocto`` and ``meta-yocto-bsp``.
	When running BitBake for the first time after upgrading, your
	``conf/bblayers.conf`` file will be updated to handle this change and
	you will be asked to re-run or restart for the changes to take effect.

	.. _1.3-recipes:

	Recipes
	-------

	Differences include changes for the following:

	.. _migration-1.3-python-function-whitespace:

	Python Function Whitespace
	~~~~~~~~~~~~~~~~~~~~~~~~~~

	All Python functions must now use four spaces for indentation.
	Previously, an inconsistent mix of spaces and tabs existed, which made
	extending these functions using ``_append`` or ``_prepend`` complicated
	given that Python treats whitespace as syntactically significant. If you
	are defining or extending any Python functions (e.g.
	``populate_packages``, ``do_unpack``, ``do_patch`` and so forth) in
	custom recipes or classes, you need to ensure you are using consistent
	four-space indentation.

	.. _migration-1.3-proto=-in-src-uri:

	proto= in SRC_URI
	~~~~~~~~~~~~~~~~~

	Any use of ``proto=`` in :term:`SRC_URI` needs to be
	changed to ``protocol=``. In particular, this applies to the following
	URIs:

	- ``svn://``

	- ``bzr://``

	- ``hg://``

	- ``osc://``

	Other URIs were already using ``protocol=``. This change improves
	consistency.

	.. _migration-1.3-nativesdk:

	nativesdk
	~~~~~~~~~

	The suffix ``nativesdk`` is now implemented as a prefix, which
	simplifies a lot of the packaging code for ``nativesdk`` recipes. All
	custom ``nativesdk`` recipes, which are relocatable packages that are
	native to :term:`SDK_ARCH`, and any references need to
	be updated to use ``nativesdk-`` instead of ``-nativesdk``.

	.. _migration-1.3-task-recipes:

	Task Recipes
	~~~~~~~~~~~~

	"Task" recipes are now known as "Package groups" and have been renamed
	from ``task-.bb`` to ``packagegroup-.bb``. Existing references to the
	previous ``task-*`` names should work in most cases as there is an
	automatic upgrade path for most packages. However, you should update
	references in your own recipes and configurations as they could be
	removed in future releases. You should also rename any custom ``task-*``
	recipes to ``packagegroup-*``, and change them to inherit
	``packagegroup`` instead of ``task``, as well as taking the opportunity
	to remove anything now handled by ``packagegroup.bbclass``, such as
	providing ``-dev`` and ``-dbg`` packages, setting
	:term:`LIC_FILES_CHKSUM`, and so forth. See the
	":ref:`packagegroup.bbclass <ref-classes-packagegroup>`" section for
	further details.

	.. _migration-1.3-image-features:

	IMAGE_FEATURES
	~~~~~~~~~~~~~~

	Image recipes that previously included ``apps-console-core`` in
	:term:`IMAGE_FEATURES` should now include ``splash``
	instead to enable the boot-up splash screen. Retaining
	``apps-console-core`` will still include the splash screen but generates a
	warning. The ``apps-x11-core`` and ``apps-x11-games`` ``IMAGE_FEATURES``
	features have been removed.

	.. _migration-1.3-removed-recipes:

	Removed Recipes
	~~~~~~~~~~~~~~~

	The following recipes have been removed. For most of them, it is
	unlikely that you would have any references to them in your own
	:term:`Metadata`. However, you should check your metadata
	against this list to be sure:

	- ``libx11-trim``: Replaced by ``libx11``, which has a negligible
	size difference with modern Xorg.

	- ``xserver-xorg-lite``: Use ``xserver-xorg``, which has a negligible
	size difference when DRI and GLX modules are not installed.

	- ``xserver-kdrive``: Effectively unmaintained for many years.

	- ``mesa-xlib``: No longer serves any purpose.

	- ``galago``: Replaced by telepathy.

	- ``gail``: Functionality was integrated into GTK+ 2.13.

	- ``eggdbus``: No longer needed.

	- ``gcc-*-intermediate``: The build has been restructured to avoid
	the need for this step.

	- ``libgsmd``: Unmaintained for many years. Functionality now
	provided by ``ofono`` instead.

	- contacts, dates, tasks, eds-tools: Largely unmaintained PIM
	application suite. It has been moved to ``meta-gnome`` in
	``meta-openembedded``.

	In addition to the previously listed changes, the ``meta-demoapps``
	directory has also been removed because the recipes in it were not being
	maintained and many had become obsolete or broken. Additionally, these
	recipes were not parsed in the default configuration. Many of these
	recipes are already provided in an updated and maintained form within
	the OpenEmbedded community layers such as ``meta-oe`` and
	``meta-gnome``. For the remainder, you can now find them in the
	``meta-extras`` repository, which is in the
	:yocto_git:`Source Repositories <>` at
	:yocto_git:`/cgit/cgit.cgi/meta-extras/`.

	.. _1.3-linux-kernel-naming:

	Linux Kernel Naming
	-------------------

	The naming scheme for kernel output binaries has been changed to now
	include :term:`PE` as part of the filename:
	::

	KERNEL_IMAGE_BASE_NAME ?= "${KERNEL_IMAGETYPE}-${PE}-${PV}-${PR}-${MACHINE}-${DATETIME}"

	Because the ``PE`` variable is not set by default, these binary files
	could result with names that include two dash characters. Here is an
	example: ::

	bzImage--3.10.9+git0+cd502a8814_7144bcc4b8-r0-qemux86-64-20130830085431.bin