| #!/bin/sh |
| |
| findmtd() { |
| m=$(grep -xl "$1" /sys/class/mtd/*/name) |
| m=${m%/name} |
| m=${m##*/} |
| echo "$m" |
| } |
| |
| hostPrime=$(findmtd host-prime) |
| if test -z "$hostPrime" |
| then |
| echo "Unable to find mtd partition for ${hostPrime}" |
| exit 1 |
| fi |
| |
| hostSecond=$(findmtd host-second) |
| if test -z "$hostSecond" |
| then |
| echo "Unable to find mtd partition for ${hostSecond}" |
| exit 1 |
| fi |
| |
| vromPrime=$(findmtd vrom-prime) |
| if test -z "$vromPrime" |
| then |
| echo "Unable to find mtd partition for ${vromPrime}" |
| exit 1 |
| fi |
| |
| vromSecond=$(findmtd vrom-second) |
| if test -z "$vromSecond" |
| then |
| echo "Unable to find mtd partition for ${vromSecond}" |
| exit 1 |
| fi |
| |
| |
| #enable vrom |
| # host-prime to vrom-prime |
| dd if=/dev/"${hostPrime}" of=/dev/"${vromPrime}" |
| # host-second to vrom-second |
| dd if=/dev/"${hostSecond}" of=/dev/"${vromSecond}" |
| |
| # enable UART on rl300 |
| systemctl start obmc-console@ttyS3.service |
| |
| echo 0x1800008a > /sys/class/soc/srom/vromoff |
| |
| devmem 0xd1000008 8 128 |
| devmem 0xd1000009 8 36 |
| devmem 0xd1000041 8 255 |
| devmem 0xd100004b 8 8 |
| # setup PCIe ID |
| devmem 0x802f002e 16 0x03d8 |
| #enable debug vsp output |
| devmem 0x80fc0230 8 0x1 |
| |
| # Check the current power status |
| |
| currentstate=$(busctl get-property xyz.openbmc_project.State.Chassis0 /xyz/openbmc_project/state/chassis0 xyz.openbmc_project.State.Chassis CurrentPowerState | awk '{ print $2 }') |
| |
| |
| if [ "$currentstate" = "\"xyz.openbmc_project.State.Chassis.PowerState.On\"" ] |
| then |
| systemctl stop phosphor-virtual-sensor.service |
| sleep 2 |
| devmem 0x80fc0230 8 0x1 |
| systemctl start phosphor-virtual-sensor.service |
| fi |
| |
| while 'true' |
| do |
| sleep 1 |
| done |