poky/documentation/migration-guides/migration-1.5.rst - mdmillerii/openbmc - Gitiles

 Release 1.5 (dora)
 ==================

 This section provides migration information for moving to the Yocto
 Project 1.5 Release (codename "dora") from the prior release.

 .. _migration-1.5-host-dependency-changes:

 Host Dependency Changes
 -----------------------

 The OpenEmbedded build system now has some additional requirements on
 the host system:

 -  Python 2.7.3+

 -  Tar 1.24+

 -  Git 1.7.8+

 -  Patched version of Make if you are using 3.82. Most distributions
    that provide Make 3.82 use the patched version.

 If the Linux distribution you are using on your build host does not
 provide packages for these, you can install and use the Buildtools
 tarball, which provides an SDK-like environment containing them.

 For more information on this requirement, see the
 ":ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`"
 section.

 .. _migration-1.5-atom-pc-bsp:

 ``atom-pc`` Board Support Package (BSP)
 ---------------------------------------

 The ``atom-pc`` hardware reference BSP has been replaced by a
 ``genericx86`` BSP. This BSP is not necessarily guaranteed to work on
 all x86 hardware, but it will run on a wider range of systems than the
 ``atom-pc`` did.

 .. note::

    Additionally, a ``genericx86-64`` BSP has been added for 64-bit Atom
    systems.

 .. _migration-1.5-bitbake:

 BitBake
 -------

 The following changes have been made that relate to BitBake:

 -  BitBake now supports a ``_remove`` operator. The addition of this
    operator means you will have to rename any items in recipe space
    (functions, variables) whose names currently contain ``_remove_`` or
    end with ``_remove`` to avoid unexpected behavior.

 -  BitBake's global method pool has been removed. This method is not
    particularly useful and led to clashes between recipes containing
    functions that had the same name.

 -  The "none" server backend has been removed. The "process" server
    backend has been serving well as the default for a long time now.

 -  The ``bitbake-runtask`` script has been removed.

 -  ``${``\ :term:`P`\ ``}`` and
    ``${``\ :term:`PF`\ ``}`` are no longer added to
    :term:`PROVIDES` by default in ``bitbake.conf``.
    These version-specific :term:`PROVIDES` items were seldom used.
    Attempting to use them could result in two versions being built
    simultaneously rather than just one version due to the way BitBake
    resolves dependencies.

 .. _migration-1.5-qa-warnings:

 QA Warnings
 -----------

 The following changes have been made to the package QA checks:

 -  If you have customized :term:`ERROR_QA` or
    :term:`WARN_QA` values in your configuration, check
    that they contain all of the issues that you wish to be reported.
    Previous Yocto Project versions contained a bug that meant that any
    item not mentioned in :term:`ERROR_QA` or :term:`WARN_QA` would be treated as
    a warning. Consequently, several important items were not already in
    the default value of :term:`WARN_QA`. All of the possible QA checks are
    now documented in the ":ref:`insane.bbclass <ref-classes-insane>`"
    section.

 -  An additional QA check has been added to check if
    ``/usr/share/info/dir`` is being installed. Your recipe should delete
    this file within :ref:`ref-tasks-install` if "make
    install" is installing it.

 -  If you are using the ``buildhistory`` class, the check for the package
    version going backwards is now controlled using a standard QA check.
    Thus, if you have customized your :term:`ERROR_QA` or :term:`WARN_QA` values
    and still wish to have this check performed, you should add
    "version-going-backwards" to your value for one or the other
    variables depending on how you wish it to be handled. See the
    documented QA checks in the
    ":ref:`insane.bbclass <ref-classes-insane>`" section.

 .. _migration-1.5-directory-layout-changes:

 Directory Layout Changes
 ------------------------

 The following directory changes exist:

 -  Output SDK installer files are now named to include the image name
    and tuning architecture through the :term:`SDK_NAME`
    variable.

 -  Images and related files are now installed into a directory that is
    specific to the machine, instead of a parent directory containing
    output files for multiple machines. The
    :term:`DEPLOY_DIR_IMAGE` variable continues
    to point to the directory containing images for the current
    :term:`MACHINE` and should be used anywhere there is a
    need to refer to this directory. The ``runqemu`` script now uses this
    variable to find images and kernel binaries and will use BitBake to
    determine the directory. Alternatively, you can set the
    :term:`DEPLOY_DIR_IMAGE` variable in the external environment.

 -  When buildhistory is enabled, its output is now written under the
    :term:`Build Directory` rather than
    :term:`TMPDIR`. Doing so makes it easier to delete
    :term:`TMPDIR` and preserve the build history. Additionally, data for
    produced SDKs is now split by :term:`IMAGE_NAME`.

 -  The ``pkgdata`` directory produced as part of the packaging process
    has been collapsed into a single machine-specific directory. This
    directory is located under ``sysroots`` and uses a machine-specific
    name (i.e. ``tmp/sysroots/machine/pkgdata``).

 .. _migration-1.5-shortened-git-srcrev-values:

 Shortened Git ``SRCREV`` Values
 -------------------------------

 BitBake will now shorten revisions from Git repositories from the normal
 40 characters down to 10 characters within :term:`SRCPV`
 for improved usability in path and file names. This change should be
 safe within contexts where these revisions are used because the chances
 of spatially close collisions is very low. Distant collisions are not a
 major issue in the way the values are used.

 .. _migration-1.5-image-features:

 ``IMAGE_FEATURES``
 ------------------

 The following changes have been made that relate to
 :term:`IMAGE_FEATURES`:

 -  The value of :term:`IMAGE_FEATURES` is now validated to ensure invalid
    feature items are not added. Some users mistakenly add package names
    to this variable instead of using
    :term:`IMAGE_INSTALL` in order to have the
    package added to the image, which does not work. This change is
    intended to catch those kinds of situations. Valid :term:`IMAGE_FEATURES`
    are drawn from ``PACKAGE_GROUP`` definitions,
    :term:`COMPLEMENTARY_GLOB` and a new
    "validitems" varflag on :term:`IMAGE_FEATURES`. The "validitems" varflag
    change allows additional features to be added if they are not
    provided using the previous two mechanisms.

 -  The previously deprecated "apps-console-core" :term:`IMAGE_FEATURES` item
    is no longer supported. Add "splash" to :term:`IMAGE_FEATURES` if you
    wish to have the splash screen enabled, since this is all that
    apps-console-core was doing.

 .. _migration-1.5-run:

 ``/run``
 --------

 The ``/run`` directory from the Filesystem Hierarchy Standard 3.0 has
 been introduced. You can find some of the implications for this change
 :oe_git:`here </openembedded-core/commit/?id=0e326280a15b0f2c4ef2ef4ec441f63f55b75873>`.
 The change also means that recipes that install files to ``/var/run``
 must be changed. You can find a guide on how to make these changes
 `here <https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg31649.html>`__.

 .. _migration-1.5-removal-of-package-manager-database-within-image-recipes:

 Removal of Package Manager Database Within Image Recipes
 --------------------------------------------------------

 The image ``core-image-minimal`` no longer adds
 ``remove_packaging_data_files`` to
 :term:`ROOTFS_POSTPROCESS_COMMAND`.
 This addition is now handled automatically when "package-management" is
 not in :term:`IMAGE_FEATURES`. If you have custom
 image recipes that make this addition, you should remove the lines, as
 they are not needed and might interfere with correct operation of
 postinstall scripts.

 .. _migration-1.5-images-now-rebuild-only-on-changes-instead-of-every-time:

 Images Now Rebuild Only on Changes Instead of Every Time
 --------------------------------------------------------

 The :ref:`ref-tasks-rootfs` and other related image
 construction tasks are no longer marked as "nostamp". Consequently, they
 will only be re-executed when their inputs have changed. Previous
 versions of the OpenEmbedded build system always rebuilt the image when
 requested rather when necessary.

 .. _migration-1.5-task-recipes:

 Task Recipes
 ------------

 The previously deprecated ``task.bbclass`` has now been dropped. For
 recipes that previously inherited from this class, you should rename
 them from ``task-*`` to ``packagegroup-*`` and inherit packagegroup
 instead.

 For more information, see the
 ":ref:`packagegroup.bbclass <ref-classes-packagegroup>`" section.

 .. _migration-1.5-busybox:

 BusyBox
 -------

 By default, we now split BusyBox into two binaries: one that is suid
 root for those components that need it, and another for the rest of the
 components. Splitting BusyBox allows for optimization that eliminates
 the ``tinylogin`` recipe as recommended by upstream. You can disable
 this split by setting
 :term:`BUSYBOX_SPLIT_SUID` to "0".

 .. _migration-1.5-automated-image-testing:

 Automated Image Testing
 -----------------------

 A new automated image testing framework has been added through the
 :ref:`testimage.bbclass <ref-classes-testimage*>` class. This
 framework replaces the older ``imagetest-qemu`` framework.

 You can learn more about performing automated image tests in the
 ":ref:`dev-manual/common-tasks:performing automated runtime testing`"
 section in the Yocto Project Development Tasks Manual.

 .. _migration-1.5-build-history:

 Build History
 -------------

 Following are changes to Build History:

 -  Installed package sizes: ``installed-package-sizes.txt`` for an image
    now records the size of the files installed by each package instead
    of the size of each compressed package archive file.

 -  The dependency graphs (``depends*.dot``) now use the actual package
    names instead of replacing dashes, dots and plus signs with
    underscores.

 -  The ``buildhistory-diff`` and ``buildhistory-collect-srcrevs``
    utilities have improved command-line handling. Use the ``--help``
    option for each utility for more information on the new syntax.

 For more information on Build History, see the
 ":ref:`dev-manual/common-tasks:maintaining build output quality`"
 section in the Yocto Project Development Tasks Manual.

 .. _migration-1.5-udev:

 ``udev``
 --------

 Following are changes to ``udev``:

 -  ``udev`` no longer brings in ``udev-extraconf`` automatically through
    :term:`RRECOMMENDS`, since this was originally
    intended to be optional. If you need the extra rules, then add
    ``udev-extraconf`` to your image.

 -  ``udev`` no longer brings in ``pciutils-ids`` or ``usbutils-ids``
    through :term:`RRECOMMENDS`. These are not needed by ``udev`` itself and
    removing them saves around 350KB.

 .. _migration-1.5-removed-renamed-recipes:

 Removed and Renamed Recipes
 ---------------------------

 -  The ``linux-yocto`` 3.2 kernel has been removed.

 -  ``libtool-nativesdk`` has been renamed to ``nativesdk-libtool``.

 -  ``tinylogin`` has been removed. It has been replaced by a suid
    portion of Busybox. See the ":ref:`migration-1.5-busybox`"
    section for more information.

 -  ``external-python-tarball`` has been renamed to
    ``buildtools-tarball``.

 -  ``web-webkit`` has been removed. It has been functionally replaced by
    ``midori``.

 -  ``imake`` has been removed. It is no longer needed by any other
    recipe.

 -  ``transfig-native`` has been removed. It is no longer needed by any
    other recipe.

 -  ``anjuta-remote-run`` has been removed. Anjuta IDE integration has
    not been officially supported for several releases.

 .. _migration-1.5-other-changes:

 Other Changes
 -------------

 Following is a list of short entries describing other changes:

 -  ``run-postinsts``: Make this generic.

 -  ``base-files``: Remove the unnecessary ``media/``\ xxx directories.

 -  ``alsa-state``: Provide an empty ``asound.conf`` by default.

 -  ``classes/image``: Ensure
    :term:`BAD_RECOMMENDATIONS` supports
    pre-renamed package names.

 -  ``classes/rootfs_rpm``: Implement :term:`BAD_RECOMMENDATIONS` for RPM.

 -  ``systemd``: Remove ``systemd_unitdir`` if ``systemd`` is not in
    :term:`DISTRO_FEATURES`.

 -  ``systemd``: Remove ``init.d`` dir if ``systemd`` unit file is
    present and ``sysvinit`` is not a distro feature.

 -  ``libpam``: Deny all services for the ``OTHER`` entries.

 -  ``image.bbclass``: Move ``runtime_mapping_rename`` to avoid conflict
    with ``multilib``. See :yocto_bugs:`YOCTO #4993 </show_bug.cgi?id=4993>`
    in Bugzilla for more information.

 -  ``linux-dtb``: Use kernel build system to generate the ``dtb`` files.

 -  ``kern-tools``: Switch from guilt to new ``kgit-s2q`` tool.
	Release 1.5 (dora)
	==================

	This section provides migration information for moving to the Yocto
	Project 1.5 Release (codename "dora") from the prior release.

	.. _migration-1.5-host-dependency-changes:

	Host Dependency Changes
	-----------------------

	The OpenEmbedded build system now has some additional requirements on
	the host system:

	- Python 2.7.3+

	- Tar 1.24+

	- Git 1.7.8+

	- Patched version of Make if you are using 3.82. Most distributions
	that provide Make 3.82 use the patched version.

	If the Linux distribution you are using on your build host does not
	provide packages for these, you can install and use the Buildtools
	tarball, which provides an SDK-like environment containing them.

	For more information on this requirement, see the
	":ref:`ref-manual/system-requirements:required git, tar, python and gcc versions`"
	section.

	.. _migration-1.5-atom-pc-bsp:

	``atom-pc`` Board Support Package (BSP)
	---------------------------------------

	The ``atom-pc`` hardware reference BSP has been replaced by a
	``genericx86`` BSP. This BSP is not necessarily guaranteed to work on
	all x86 hardware, but it will run on a wider range of systems than the
	``atom-pc`` did.

	.. note::

	Additionally, a ``genericx86-64`` BSP has been added for 64-bit Atom
	systems.

	.. _migration-1.5-bitbake:

	BitBake
	-------

	The following changes have been made that relate to BitBake:

	- BitBake now supports a ``_remove`` operator. The addition of this
	operator means you will have to rename any items in recipe space
	(functions, variables) whose names currently contain ``_remove_`` or
	end with ``_remove`` to avoid unexpected behavior.

	- BitBake's global method pool has been removed. This method is not
	particularly useful and led to clashes between recipes containing
	functions that had the same name.

	- The "none" server backend has been removed. The "process" server
	backend has been serving well as the default for a long time now.

	- The ``bitbake-runtask`` script has been removed.

	- ``${``\ :term:`P`\ ``}`` and
	``${``\ :term:`PF`\ ``}`` are no longer added to
	:term:`PROVIDES` by default in ``bitbake.conf``.
	These version-specific :term:`PROVIDES` items were seldom used.
	Attempting to use them could result in two versions being built
	simultaneously rather than just one version due to the way BitBake
	resolves dependencies.

	.. _migration-1.5-qa-warnings:

	QA Warnings
	-----------

	The following changes have been made to the package QA checks:

	- If you have customized :term:`ERROR_QA` or
	:term:`WARN_QA` values in your configuration, check
	that they contain all of the issues that you wish to be reported.
	Previous Yocto Project versions contained a bug that meant that any
	item not mentioned in :term:`ERROR_QA` or :term:`WARN_QA` would be treated as
	a warning. Consequently, several important items were not already in
	the default value of :term:`WARN_QA`. All of the possible QA checks are
	now documented in the ":ref:`insane.bbclass <ref-classes-insane>`"
	section.

	- An additional QA check has been added to check if
	``/usr/share/info/dir`` is being installed. Your recipe should delete
	this file within :ref:`ref-tasks-install` if "make
	install" is installing it.

	- If you are using the ``buildhistory`` class, the check for the package
	version going backwards is now controlled using a standard QA check.
	Thus, if you have customized your :term:`ERROR_QA` or :term:`WARN_QA` values
	and still wish to have this check performed, you should add
	"version-going-backwards" to your value for one or the other
	variables depending on how you wish it to be handled. See the
	documented QA checks in the
	":ref:`insane.bbclass <ref-classes-insane>`" section.

	.. _migration-1.5-directory-layout-changes:

	Directory Layout Changes
	------------------------

	The following directory changes exist:

	- Output SDK installer files are now named to include the image name
	and tuning architecture through the :term:`SDK_NAME`
	variable.

	- Images and related files are now installed into a directory that is
	specific to the machine, instead of a parent directory containing
	output files for multiple machines. The
	:term:`DEPLOY_DIR_IMAGE` variable continues
	to point to the directory containing images for the current
	:term:`MACHINE` and should be used anywhere there is a
	need to refer to this directory. The ``runqemu`` script now uses this
	variable to find images and kernel binaries and will use BitBake to
	determine the directory. Alternatively, you can set the
	:term:`DEPLOY_DIR_IMAGE` variable in the external environment.

	- When buildhistory is enabled, its output is now written under the
	:term:`Build Directory` rather than
	:term:`TMPDIR`. Doing so makes it easier to delete
	:term:`TMPDIR` and preserve the build history. Additionally, data for
	produced SDKs is now split by :term:`IMAGE_NAME`.

	- The ``pkgdata`` directory produced as part of the packaging process
	has been collapsed into a single machine-specific directory. This
	directory is located under ``sysroots`` and uses a machine-specific
	name (i.e. ``tmp/sysroots/machine/pkgdata``).

	.. _migration-1.5-shortened-git-srcrev-values:

	Shortened Git ``SRCREV`` Values
	-------------------------------

	BitBake will now shorten revisions from Git repositories from the normal
	40 characters down to 10 characters within :term:`SRCPV`
	for improved usability in path and file names. This change should be
	safe within contexts where these revisions are used because the chances
	of spatially close collisions is very low. Distant collisions are not a
	major issue in the way the values are used.

	.. _migration-1.5-image-features:

	``IMAGE_FEATURES``
	------------------

	The following changes have been made that relate to
	:term:`IMAGE_FEATURES`:

	- The value of :term:`IMAGE_FEATURES` is now validated to ensure invalid
	feature items are not added. Some users mistakenly add package names
	to this variable instead of using
	:term:`IMAGE_INSTALL` in order to have the
	package added to the image, which does not work. This change is
	intended to catch those kinds of situations. Valid :term:`IMAGE_FEATURES`
	are drawn from ``PACKAGE_GROUP`` definitions,
	:term:`COMPLEMENTARY_GLOB` and a new
	"validitems" varflag on :term:`IMAGE_FEATURES`. The "validitems" varflag
	change allows additional features to be added if they are not
	provided using the previous two mechanisms.

	- The previously deprecated "apps-console-core" :term:`IMAGE_FEATURES` item
	is no longer supported. Add "splash" to :term:`IMAGE_FEATURES` if you
	wish to have the splash screen enabled, since this is all that
	apps-console-core was doing.

	.. _migration-1.5-run:

	``/run``
	--------

	The ``/run`` directory from the Filesystem Hierarchy Standard 3.0 has
	been introduced. You can find some of the implications for this change
	:oe_git:`here </openembedded-core/commit/?id=0e326280a15b0f2c4ef2ef4ec441f63f55b75873>`.
	The change also means that recipes that install files to ``/var/run``
	must be changed. You can find a guide on how to make these changes
	`here <https://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg31649.html>`__.

	.. _migration-1.5-removal-of-package-manager-database-within-image-recipes:

	Removal of Package Manager Database Within Image Recipes
	--------------------------------------------------------

	The image ``core-image-minimal`` no longer adds
	``remove_packaging_data_files`` to
	:term:`ROOTFS_POSTPROCESS_COMMAND`.
	This addition is now handled automatically when "package-management" is
	not in :term:`IMAGE_FEATURES`. If you have custom
	image recipes that make this addition, you should remove the lines, as
	they are not needed and might interfere with correct operation of
	postinstall scripts.

	.. _migration-1.5-images-now-rebuild-only-on-changes-instead-of-every-time:

	Images Now Rebuild Only on Changes Instead of Every Time
	--------------------------------------------------------

	The :ref:`ref-tasks-rootfs` and other related image
	construction tasks are no longer marked as "nostamp". Consequently, they
	will only be re-executed when their inputs have changed. Previous
	versions of the OpenEmbedded build system always rebuilt the image when
	requested rather when necessary.

	.. _migration-1.5-task-recipes:

	Task Recipes
	------------

	The previously deprecated ``task.bbclass`` has now been dropped. For
	recipes that previously inherited from this class, you should rename
	them from ``task-`` to ``packagegroup-`` and inherit packagegroup
	instead.

	For more information, see the
	":ref:`packagegroup.bbclass <ref-classes-packagegroup>`" section.

	.. _migration-1.5-busybox:

	BusyBox
	-------

	By default, we now split BusyBox into two binaries: one that is suid
	root for those components that need it, and another for the rest of the
	components. Splitting BusyBox allows for optimization that eliminates
	the ``tinylogin`` recipe as recommended by upstream. You can disable
	this split by setting
	:term:`BUSYBOX_SPLIT_SUID` to "0".

	.. _migration-1.5-automated-image-testing:

	Automated Image Testing
	-----------------------

	A new automated image testing framework has been added through the
	:ref:`testimage.bbclass <ref-classes-testimage*>` class. This
	framework replaces the older ``imagetest-qemu`` framework.

	You can learn more about performing automated image tests in the
	":ref:`dev-manual/common-tasks:performing automated runtime testing`"
	section in the Yocto Project Development Tasks Manual.

	.. _migration-1.5-build-history:

	Build History
	-------------

	Following are changes to Build History:

	- Installed package sizes: ``installed-package-sizes.txt`` for an image
	now records the size of the files installed by each package instead
	of the size of each compressed package archive file.

	- The dependency graphs (``depends*.dot``) now use the actual package
	names instead of replacing dashes, dots and plus signs with
	underscores.

	- The ``buildhistory-diff`` and ``buildhistory-collect-srcrevs``
	utilities have improved command-line handling. Use the ``--help``
	option for each utility for more information on the new syntax.

	For more information on Build History, see the
	":ref:`dev-manual/common-tasks:maintaining build output quality`"
	section in the Yocto Project Development Tasks Manual.

	.. _migration-1.5-udev:

	``udev``
	--------

	Following are changes to ``udev``:

	- ``udev`` no longer brings in ``udev-extraconf`` automatically through
	:term:`RRECOMMENDS`, since this was originally
	intended to be optional. If you need the extra rules, then add
	``udev-extraconf`` to your image.

	- ``udev`` no longer brings in ``pciutils-ids`` or ``usbutils-ids``
	through :term:`RRECOMMENDS`. These are not needed by ``udev`` itself and
	removing them saves around 350KB.

	.. _migration-1.5-removed-renamed-recipes:

	Removed and Renamed Recipes
	---------------------------

	- The ``linux-yocto`` 3.2 kernel has been removed.

	- ``libtool-nativesdk`` has been renamed to ``nativesdk-libtool``.

	- ``tinylogin`` has been removed. It has been replaced by a suid
	portion of Busybox. See the ":ref:`migration-1.5-busybox`"
	section for more information.

	- ``external-python-tarball`` has been renamed to
	``buildtools-tarball``.

	- ``web-webkit`` has been removed. It has been functionally replaced by
	``midori``.

	- ``imake`` has been removed. It is no longer needed by any other
	recipe.

	- ``transfig-native`` has been removed. It is no longer needed by any
	other recipe.

	- ``anjuta-remote-run`` has been removed. Anjuta IDE integration has
	not been officially supported for several releases.

	.. _migration-1.5-other-changes:

	Other Changes
	-------------

	Following is a list of short entries describing other changes:

	- ``run-postinsts``: Make this generic.

	- ``base-files``: Remove the unnecessary ``media/``\ xxx directories.

	- ``alsa-state``: Provide an empty ``asound.conf`` by default.

	- ``classes/image``: Ensure
	:term:`BAD_RECOMMENDATIONS` supports
	pre-renamed package names.

	- ``classes/rootfs_rpm``: Implement :term:`BAD_RECOMMENDATIONS` for RPM.

	- ``systemd``: Remove ``systemd_unitdir`` if ``systemd`` is not in
	:term:`DISTRO_FEATURES`.

	- ``systemd``: Remove ``init.d`` dir if ``systemd`` unit file is
	present and ``sysvinit`` is not a distro feature.

	- ``libpam``: Deny all services for the ``OTHER`` entries.

	- ``image.bbclass``: Move ``runtime_mapping_rename`` to avoid conflict
	with ``multilib``. See :yocto_bugs:`YOCTO #4993 </show_bug.cgi?id=4993>`
	in Bugzilla for more information.

	- ``linux-dtb``: Use kernel build system to generate the ``dtb`` files.

	- ``kern-tools``: Switch from guilt to new ``kgit-s2q`` tool.