| SUMMARY = "Performance analysis tools for Linux" |
| DESCRIPTION = "Performance counters for Linux are a new kernel-based \ |
| subsystem that provide a framework for all things \ |
| performance analysis. It covers hardware level \ |
| (CPU/PMU, Performance Monitoring Unit) features \ |
| and software features (software counters, tracepoints) \ |
| as well." |
| HOMEPAGE = "https://perf.wiki.kernel.org/index.php/Main_Page" |
| |
| LICENSE = "GPL-2.0-only" |
| |
| PR = "r9" |
| |
| PACKAGECONFIG ??= "scripting tui libunwind" |
| PACKAGECONFIG[dwarf] = ",NO_DWARF=1" |
| PACKAGECONFIG[scripting] = ",NO_LIBPERL=1 NO_LIBPYTHON=1,perl python3" |
| # gui support was added with kernel 3.6.35 |
| # since 3.10 libnewt was replaced by slang |
| # to cover a wide range of kernel we add both dependencies |
| PACKAGECONFIG[tui] = ",NO_NEWT=1,libnewt slang" |
| PACKAGECONFIG[libunwind] = ",NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1,libunwind" |
| PACKAGECONFIG[libnuma] = ",NO_LIBNUMA=1" |
| PACKAGECONFIG[systemtap] = ",NO_SDT=1,systemtap" |
| PACKAGECONFIG[jvmti] = ",NO_JVMTI=1" |
| # libaudit support would need scripting to be enabled |
| PACKAGECONFIG[audit] = ",NO_LIBAUDIT=1,audit" |
| PACKAGECONFIG[manpages] = ",,xmlto-native asciidoc-native" |
| PACKAGECONFIG[cap] = ",,libcap" |
| # Arm CoreSight |
| PACKAGECONFIG[coresight] = "CORESIGHT=1,,opencsd" |
| |
| # libunwind is not yet ported for some architectures |
| PACKAGECONFIG:remove:arc = "libunwind" |
| PACKAGECONFIG:remove:riscv32 = "libunwind" |
| |
| DEPENDS = " \ |
| virtual/${MLPREFIX}libc \ |
| ${MLPREFIX}elfutils \ |
| ${MLPREFIX}binutils \ |
| bison-native flex-native xz \ |
| " |
| |
| do_configure[depends] += "virtual/kernel:do_shared_workdir" |
| |
| PROVIDES = "virtual/perf" |
| |
| inherit linux-kernel-base kernel-arch manpages |
| |
| # needed for building the tools/perf Python bindings |
| inherit ${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'python3targetconfig', '', d)} |
| inherit python3-dir |
| export PYTHON_SITEPACKAGES_DIR |
| |
| #kernel 3.1+ supports WERROR to disable warnings as errors |
| export WERROR = "0" |
| |
| do_populate_lic[depends] += "virtual/kernel:do_shared_workdir" |
| |
| # needed for building the tools/perf Perl binding |
| include ${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'perf-perl.inc', '', d)} |
| |
| inherit kernelsrc |
| |
| S = "${WORKDIR}/${BP}" |
| SPDX_S = "${S}/tools/perf" |
| |
| # The LDFLAGS is required or some old kernels fails due missing |
| # symbols and this is preferred than requiring patches to every old |
| # supported kernel. |
| LDFLAGS="-ldl -lutil" |
| |
| EXTRA_OEMAKE = '\ |
| V=1 \ |
| -C ${S}/tools/perf \ |
| O=${B} \ |
| CROSS_COMPILE=${TARGET_PREFIX} \ |
| ARCH=${ARCH} \ |
| CC="${CC}" \ |
| CCLD="${CC}" \ |
| LDSHARED="${CC} -shared" \ |
| AR="${AR}" \ |
| LD="${LD}" \ |
| EXTRA_CFLAGS="-ldw" \ |
| YFLAGS='-y --file-prefix-map=${WORKDIR}=/usr/src/debug/${PN}/${EXTENDPE}${PV}-${PR}' \ |
| EXTRA_LDFLAGS="${PERF_EXTRA_LDFLAGS}" \ |
| perfexecdir=${libexecdir} \ |
| NO_GTK2=1 \ |
| ${PACKAGECONFIG_CONFARGS} \ |
| TMPDIR="${B}" \ |
| LIBUNWIND_DIR=${STAGING_EXECPREFIXDIR} \ |
| ' |
| |
| EXTRA_OEMAKE += "\ |
| 'DESTDIR=${D}' \ |
| 'prefix=${prefix}' \ |
| 'bindir=${bindir}' \ |
| 'sharedir=${datadir}' \ |
| 'sysconfdir=${sysconfdir}' \ |
| 'perfexecdir=${libexecdir}/perf-core' \ |
| 'ETC_PERFCONFIG=${@os.path.relpath(sysconfdir, prefix)}' \ |
| 'sharedir=${@os.path.relpath(datadir, prefix)}' \ |
| 'mandir=${@os.path.relpath(mandir, prefix)}' \ |
| 'infodir=${@os.path.relpath(infodir, prefix)}' \ |
| ${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'PYTHON=python3 PYTHON_CONFIG=python3-config', '', d)} \ |
| " |
| |
| # During do_configure, we might run a 'make clean'. That often breaks |
| # when done in parallel, so disable parallelism for do_configure. Note |
| # that it has to be done this way rather than by passing -j1, since |
| # perf's build system by default ignores any -j argument, but does |
| # honour a JOBS variable. |
| EXTRA_OEMAKE:append:task-configure = " JOBS=1" |
| |
| PERF_SRC ?= "Makefile \ |
| tools/arch \ |
| tools/build \ |
| tools/include \ |
| tools/lib \ |
| tools/Makefile \ |
| tools/perf \ |
| tools/scripts \ |
| scripts/ \ |
| arch/${ARCH}/Makefile \ |
| " |
| |
| PERF_EXTRA_LDFLAGS = "" |
| |
| # MIPS N32/N64 |
| PERF_EXTRA_LDFLAGS:mipsarchn32eb = "-m elf32btsmipn32" |
| PERF_EXTRA_LDFLAGS:mipsarchn32el = "-m elf32ltsmipn32" |
| PERF_EXTRA_LDFLAGS:mipsarchn64eb = "-m elf64btsmip" |
| PERF_EXTRA_LDFLAGS:mipsarchn64el = "-m elf64ltsmip" |
| |
| do_compile() { |
| # Linux kernel build system is expected to do the right thing |
| unset CFLAGS |
| oe_runmake all |
| } |
| |
| do_install() { |
| # Linux kernel build system is expected to do the right thing |
| unset CFLAGS |
| oe_runmake install |
| # we are checking for this make target to be compatible with older perf versions |
| if ${@bb.utils.contains('PACKAGECONFIG', 'scripting', 'true', 'false', d)} && grep -q install-python_ext ${S}/tools/perf/Makefile*; then |
| oe_runmake DESTDIR=${D} install-python_ext |
| fi |
| } |
| |
| do_configure[prefuncs] += "copy_perf_source_from_kernel" |
| python copy_perf_source_from_kernel() { |
| sources = (d.getVar("PERF_SRC") or "").split() |
| src_dir = d.getVar("STAGING_KERNEL_DIR") |
| dest_dir = d.getVar("S") |
| bb.utils.mkdirhier(dest_dir) |
| bb.utils.prunedir(dest_dir) |
| for s in sources: |
| src = oe.path.join(src_dir, s) |
| dest = oe.path.join(dest_dir, s) |
| if not os.path.exists(src): |
| bb.fatal("Path does not exist: %s. Maybe PERF_SRC does not match the kernel version." % src) |
| if os.path.isdir(src): |
| oe.path.copyhardlinktree(src, dest) |
| else: |
| src_path = os.path.dirname(s) |
| os.makedirs(os.path.join(dest_dir,src_path),exist_ok=True) |
| bb.utils.copyfile(src, dest) |
| } |
| |
| do_configure:prepend () { |
| # If building a multlib based perf, the incorrect library path will be |
| # detected by perf, since it triggers via: ifeq ($(ARCH),x86_64). In a 32 bit |
| # build, with a 64 bit multilib, the arch won't match and the detection of a |
| # 64 bit build (and library) are not exected. To ensure that libraries are |
| # installed to the correct location, we can use the weak assignment in the |
| # config/Makefile. |
| # |
| # Also need to relocate .config-detected to $(OUTPUT)/config-detected |
| # for kernel sources that do not already do this |
| # as two builds (e.g. perf and lib32-perf from mutlilib can conflict |
| # with each other if its in the shared source directory |
| # |
| if [ -e "${S}/tools/perf/config/Makefile" ]; then |
| perfconfig="${S}/tools/perf/config/Makefile" |
| fi |
| if [ -e "${S}/tools/perf/Makefile.config" ]; then |
| perfconfig="${S}/tools/perf/Makefile.config" |
| fi |
| if [ -n "${perfconfig}" ]; then |
| # Match $(prefix)/$(lib) and $(prefix)/lib |
| sed -i -e 's,^libdir = \($(prefix)/.*lib\),libdir ?= \1,' \ |
| -e 's,^perfexecdir = \(.*\),perfexecdir ?= \1,' \ |
| -e 's,\ .config-detected, $(OUTPUT)/config-detected,g' \ |
| ${perfconfig} |
| fi |
| # The man pages installation is "$(INSTALL) -d -m 755 $(DESTDIR)$(man1dir)" |
| # in ${S}/tools/perf/Documentation/Makefile, if the mandir set to '?=', it |
| # will use the relative path 'share/man', in the way it will resulting in |
| # incorrect installation for man pages. |
| if [ -e "${S}/tools/perf/Documentation/Makefile" ]; then |
| sed -i 's,^mandir?=,mandir:=,' ${S}/tools/perf/Documentation/Makefile |
| fi |
| if [ -e "${S}/tools/perf/Makefile.perf" ]; then |
| sed -i -e 's,\ .config-detected, $(OUTPUT)/config-detected,g' \ |
| ${S}/tools/perf/Makefile.perf |
| sed -i -e "s,prefix='\$(DESTDIR_SQ)/usr'$,prefix='\$(DESTDIR_SQ)/usr' --install-lib='\$(DESTDIR)\$(PYTHON_SITEPACKAGES_DIR)',g" \ |
| ${S}/tools/perf/Makefile.perf |
| # backport https://github.com/torvalds/linux/commit/e4ffd066ff440a57097e9140fa9e16ceef905de8 |
| sed -i -e 's,\($(Q)$(SHELL) .$(arch_errno_tbl).\) $(CC) $(arch_errno_hdr_dir),\1 $(firstword $(CC)) $(arch_errno_hdr_dir),g' \ |
| ${S}/tools/perf/Makefile.perf |
| fi |
| sed -i -e "s,--root='/\$(DESTDIR_SQ)',--prefix='\$(DESTDIR_SQ)/usr' --install-lib='\$(DESTDIR)\$(PYTHON_SITEPACKAGES_DIR)',g" \ |
| ${S}/tools/perf/Makefile* |
| |
| if [ -e "${S}/tools/build/Makefile.build" ]; then |
| sed -i -e 's,\ .config-detected, $(OUTPUT)/config-detected,g' \ |
| ${S}/tools/build/Makefile.build |
| fi |
| |
| # start reproducibility substitutions |
| if [ -e "${S}/tools/perf/Makefile.config" ]; then |
| # The following line in the Makefle: |
| # override PYTHON := $(call get-executable-or-default,PYTHON,$(PYTHON_AUTO)) |
| # "PYTHON" / "PYTHON_AUTO" have the full path as part of the variable. We've |
| # ensure that the environment is setup and we do not need the full path to be |
| # captured, since the symbol gets built into the executable, making it not |
| # reproducible. |
| sed -i -e 's,$(call get-executable-or-default\,PYTHON\,$(PYTHON_AUTO)),$(notdir $(call get-executable-or-default\,PYTHON\,$(PYTHON_AUTO))),g' \ |
| ${S}/tools/perf/Makefile.config |
| |
| # The following line: |
| # srcdir_SQ = $(patsubst %tools/perf,tools/perf,$(subst ','\'',$(srcdir))), |
| # Captures the full src path of perf, which of course makes it not |
| # reproducible. We really only need the relative location 'tools/perf', so we |
| # change the Makefile line to remove everything before 'tools/perf' |
| sed -i -e "s%srcdir_SQ = \$(subst ','\\\'',\$(srcdir))%srcdir_SQ = \$(patsubst \%tools/perf,tools/perf,\$(subst ','\\\'',\$(srcdir)))%g" \ |
| ${S}/tools/perf/Makefile.config |
| fi |
| if [ -e "${S}/tools/perf/tests/Build" ]; then |
| # OUTPUT is the full path, we have python on the path so we remove it from the |
| # definition. This is captured in the perf binary, so breaks reproducibility |
| sed -i -e 's,PYTHONPATH="BUILD_STR($(OUTPUT)python)",PYTHONPATH="BUILD_STR(python)",g' \ |
| ${S}/tools/perf/tests/Build |
| fi |
| if [ -e "${S}/tools/perf/util/Build" ]; then |
| # To avoid bison generating #ifdefs that have captured paths, we make sure |
| # all the calls have YFLAGS, which contains prefix mapping information. |
| sed -i -e 's,$(BISON),$(BISON) $(YFLAGS),g' ${S}/tools/perf/util/Build |
| fi |
| if [ -e "${S}/scripts/Makefile.host" ]; then |
| # To avoid yacc (bison) generating #ifdefs that have captured paths, we make sure |
| # all the calls have YFLAGS, which contains prefix mapping information. |
| sed -i -e 's,$(YACC),$(YACC) $(YFLAGS),g' ${S}/scripts/Makefile.host |
| fi |
| if [ -e "${S}/tools/perf/pmu-events/Build" ]; then |
| target='$(OUTPUT)pmu-events/pmu-events.c $(V)' |
| replacement1='$(OUTPUT)pmu-events/pmu-events.c $(V)\n' |
| replacement2='\t$(srctree)/sort-pmuevents.py $(OUTPUT)pmu-events/pmu-events.c $(OUTPUT)pmu-events/pmu-events.c.new\n' |
| replacement3='\tcp $(OUTPUT)pmu-events/pmu-events.c.new $(OUTPUT)pmu-events/pmu-events.c' |
| sed -i -e "s,$target,$replacement1$replacement2$replacement3,g" \ |
| "${S}/tools/perf/pmu-events/Build" |
| fi |
| # end reproducibility substitutions |
| |
| # We need to ensure the --sysroot option in CC is preserved |
| if [ -e "${S}/tools/perf/Makefile.perf" ]; then |
| sed -i 's,CC = $(CROSS_COMPILE)gcc,#CC,' ${S}/tools/perf/Makefile.perf |
| sed -i 's,AR = $(CROSS_COMPILE)ar,#AR,' ${S}/tools/perf/Makefile.perf |
| sed -i 's,LD = $(CROSS_COMPILE)ld,#LD,' ${S}/tools/perf/Makefile.perf |
| fi |
| if [ -e "${S}/tools/lib/api/Makefile" ]; then |
| sed -i 's,CC = $(CROSS_COMPILE)gcc,#CC,' ${S}/tools/lib/api/Makefile |
| sed -i 's,AR = $(CROSS_COMPILE)ar,#AR,' ${S}/tools/lib/api/Makefile |
| sed -i 's,LD = $(CROSS_COMPILE)ld,#LD,' ${S}/tools/lib/api/Makefile |
| fi |
| if [ -e "${S}/tools/lib/subcmd/Makefile" ]; then |
| sed -i 's,CC = $(CROSS_COMPILE)gcc,#CC,' ${S}/tools/lib/subcmd/Makefile |
| sed -i 's,AR = $(CROSS_COMPILE)ar,#AR,' ${S}/tools/lib/subcmd/Makefile |
| fi |
| if [ -e "${S}/tools/perf/config/feature-checks/Makefile" ]; then |
| sed -i 's,CC := $(CROSS_COMPILE)gcc -MD,CC += -MD,' ${S}/tools/perf/config/feature-checks/Makefile |
| fi |
| if [ -e "${S}/tools/build/Makefile.feature" ]; then |
| sed -i 's,CFLAGS=,CC="\$(CC)" CFLAGS=,' ${S}/tools/build/Makefile.feature |
| fi |
| |
| # 3.17-rc1+ has a include issue for arm/powerpc. Temporarily sed in the appropriate include |
| if [ -e "${S}/tools/perf/arch/$ARCH/util/skip-callchain-idx.c" ]; then |
| sed -i 's,#include "util/callchain.h",#include "util/callchain.h"\n#include "util/debug.h",' ${S}/tools/perf/arch/$ARCH/util/skip-callchain-idx.c |
| fi |
| if [ -e "${S}/tools/perf/arch/arm/util/unwind-libunwind.c" ] && [ -e "${S}/tools/perf/arch/arm/tests/dwarf-unwind.c" ]; then |
| sed -i 's,#include "tests/tests.h",#include "tests/tests.h"\n#include "util/debug.h",' ${S}/tools/perf/arch/arm/tests/dwarf-unwind.c |
| sed -i 's,#include "perf_regs.h",#include "perf_regs.h"\n#include "util/debug.h",' ${S}/tools/perf/arch/arm/util/unwind-libunwind.c |
| fi |
| |
| # use /usr/bin/env instead of version specific python |
| for s in `find ${S}/tools/perf/ -name '*.py'` `find ${S}/scripts/ -name 'bpf_helpers_doc.py'`; do |
| sed -i -e "s,#!.*python.*,#!${USRBINPATH}/env python3," ${s} |
| done |
| |
| # unistd.h can be out of sync between libc-headers and the captured version in the perf source |
| # so we copy it from the sysroot unistd.h to the perf unistd.h |
| install -D -m0644 ${STAGING_INCDIR}/asm-generic/unistd.h ${S}/tools/include/uapi/asm-generic/unistd.h |
| install -D -m0644 ${STAGING_INCDIR}/asm-generic/unistd.h ${S}/include/uapi/asm-generic/unistd.h |
| |
| # the fetcher is inhibited by the 'inherit kernelsrc', so we do a quick check and |
| # copy for a helper script we need |
| for p in $(echo ${FILESPATH} | tr ':' '\n'); do |
| if [ -e $p/sort-pmuevents.py ]; then |
| cp $p/sort-pmuevents.py ${S} |
| fi |
| done |
| } |
| |
| python do_package:prepend() { |
| d.setVar('PKGV', d.getVar("KERNEL_VERSION").split("-")[0]) |
| } |
| |
| PACKAGE_ARCH = "${MACHINE_ARCH}" |
| |
| |
| PACKAGES =+ "${PN}-archive ${PN}-tests ${PN}-perl ${PN}-python" |
| |
| RDEPENDS:${PN} += "elfutils bash" |
| RDEPENDS:${PN}-archive =+ "bash" |
| RDEPENDS:${PN}-python =+ "bash python3 python3-modules ${@bb.utils.contains('PACKAGECONFIG', 'audit', 'audit-python', '', d)}" |
| RDEPENDS:${PN}-perl =+ "bash perl perl-modules" |
| RDEPENDS:${PN}-tests =+ "python3 bash" |
| |
| RSUGGESTS_SCRIPTING = "${@bb.utils.contains('PACKAGECONFIG', 'scripting', '${PN}-perl ${PN}-python', '',d)}" |
| RSUGGESTS:${PN} += "${PN}-archive ${PN}-tests ${RSUGGESTS_SCRIPTING}" |
| |
| FILES_SOLIBSDEV = "" |
| FILES:${PN} += "${libexecdir}/perf-core ${exec_prefix}/libexec/perf-core ${libdir}/traceevent ${libdir}/libperf-jvmti.so" |
| FILES:${PN}-archive = "${libdir}/perf/perf-core/perf-archive" |
| FILES:${PN}-tests = "${libdir}/perf/perf-core/tests ${libexecdir}/perf-core/tests" |
| FILES:${PN}-python = " \ |
| ${PYTHON_SITEPACKAGES_DIR} \ |
| ${libexecdir}/perf-core/scripts/python \ |
| " |
| FILES:${PN}-perl = "${libexecdir}/perf-core/scripts/perl" |
| |
| |
| INHIBIT_PACKAGE_DEBUG_SPLIT="1" |
| DEBUG_OPTIMIZATION:append = " -Wno-error=maybe-uninitialized" |