meta-security/recipes-security/clamav/files/clamd.conf - mdmillerii/openbmc - Gitiles

 # Uncomment this option to enable logging.
 # LogFile must be writable for the user running daemon.
 # A full path is required.
 # Default: disabled
 LogFile /tmp/clamd.log

 # By default the log file is locked for writing - the lock protects against
 # running clamd multiple times (if want to run another clamd, please
 # copy the configuration file, change the LogFile variable, and run
 # the daemon with --config-file option).
 # This option disables log file locking.
 # Default: no
 LogFileUnlock yes

 # Maximum size of the log file.
 # Value of 0 disables the limit.
 # You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
 # and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
 # in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
 # rotation (the LogRotate option) will always be enabled.
 # Default: 1M
 LogFileMaxSize 2M

 # Log time with each message.
 # Default: no
 LogTime yes

 # Also log clean files. Useful in debugging but drastically increases the
 # log size.
 # Default: no
 #LogClean yes

 # Use system logger (can work together with LogFile).
 # Default: no
 #LogSyslog yes

 # Specify the type of syslog messages - please refer to 'man syslog'
 # for facility names.
 # Default: LOG_LOCAL6
 #LogFacility LOG_MAIL

 # Enable verbose logging.
 # Default: no
 #LogVerbose yes

 # Enable log rotation. Always enabled when LogFileMaxSize is enabled.
 # Default: no
 #LogRotate yes

 # Log additional information about the infected file, such as its
 # size and hash, together with the virus name.
 ExtendedDetectionInfo yes

 # This option allows you to save a process identifier of the listening
 # daemon (main thread).
 # Default: disabled
 PidFile /var/run/clamd.pid

 # Optional path to the global temporary directory.
 # Default: system specific (usually /tmp or /var/tmp).
 TemporaryDirectory /var/tmp

 # Path to the database directory.
 # Default: hardcoded (depends on installation options)
 DatabaseDirectory /var/lib/clamav

 # Only load the official signatures published by the ClamAV project.
 # Default: no
 #OfficialDatabaseOnly no

 # The daemon can work in local mode, network mode or both.
 # Due to security reasons we recommend the local mode.

 # Path to a local socket file the daemon will listen on.
 # Default: disabled (must be specified by a user)
 LocalSocket /tmp/clamd.socket

 # Sets the group ownership on the unix socket.
 # Default: disabled (the primary group of the user running clamd)
 #LocalSocketGroup virusgroup

 # Sets the permissions on the unix socket to the specified mode.
 # Default: disabled (socket is world accessible)
 #LocalSocketMode 660

 # Remove stale socket after unclean shutdown.
 # Default: yes
 #FixStaleSocket yes

 # TCP port address.
 # Default: no
 #TCPSocket 3310

 # TCP address.
 # By default we bind to INADDR_ANY, probably not wise.
 # Enable the following to provide some degree of protection
 # from the outside world. This option can be specified multiple
 # times if you want to listen on multiple IPs. IPv6 is now supported.
 # Default: no
 #TCPAddr 127.0.0.1

 # Maximum length the queue of pending connections may grow to.
 # Default: 200
 #MaxConnectionQueueLength 30

 # Clamd uses FTP-like protocol to receive data from remote clients.
 # If you are using clamav-milter to balance load between remote clamd daemons
 # on firewall servers you may need to tune the options below.

 # Close the connection when the data size limit is exceeded.
 # The value should match your MTA's limit for a maximum attachment size.
 # Default: 25M
 #StreamMaxLength 10M

 # Limit port range.
 # Default: 1024
 #StreamMinPort 30000
 # Default: 2048
 #StreamMaxPort 32000

 # Maximum number of threads running at the same time.
 # Default: 10
 #MaxThreads 20

 # Waiting for data from a client socket will timeout after this time (seconds).
 # Default: 120
 #ReadTimeout 300

 # This option specifies the time (in seconds) after which clamd should
 # timeout if a client doesn't provide any initial command after connecting.
 # Default: 5
 #CommandReadTimeout 5

 # This option specifies how long to wait (in miliseconds) if the send buffer is full.
 # Keep this value low to prevent clamd hanging
 #
 # Default: 500
 #SendBufTimeout 200

 # Maximum number of queued items (including those being processed by MaxThreads threads)
 # It is recommended to have this value at least twice MaxThreads if possible.
 # WARNING: you shouldn't increase this too much to avoid running out  of file descriptors,
 # the following condition should hold:
 # MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
 #
 # Default: 100
 #MaxQueue 200

 # Waiting for a new job will timeout after this time (seconds).
 # Default: 30
 #IdleTimeout 60

 # Don't scan files and directories matching regex
 # This directive can be used multiple times
 # Default: scan all
 #ExcludePath ^/proc/
 #ExcludePath ^/sys/

 # Maximum depth directories are scanned at.
 # Default: 15
 #MaxDirectoryRecursion 20

 # Follow directory symlinks.
 # Default: no
 #FollowDirectorySymlinks yes

 # Follow regular file symlinks.
 # Default: no
 #FollowFileSymlinks yes

 # Scan files and directories on other filesystems.
 # Default: yes
 #CrossFilesystems yes

 # Perform a database check.
 # Default: 600 (10 min)
 #SelfCheck 600

 # Execute a command when virus is found. In the command string %v will
 # be replaced with the virus name.
 # Default: no
 #VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"

 # Run as another user (clamd must be started by root for this option to work)
 # Default: don't drop privileges
 User clamav

 # Initialize supplementary group access (clamd must be started by root).
 # Default: no
 #AllowSupplementaryGroups no

 # Stop daemon when libclamav reports out of memory condition.
 #ExitOnOOM yes

 # Don't fork into background.
 # Default: no
 #Foreground yes

 # Enable debug messages in libclamav.
 # Default: no
 #Debug yes

 # Do not remove temporary files (for debug purposes).
 # Default: no
 #LeaveTemporaryFiles yes

 # Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject
 # any ALLMATCHSCAN command as invalid.
 # Default: yes
 #AllowAllMatchScan no

 # Detect Possibly Unwanted Applications.
 # Default: no
 #DetectPUA yes

 # Exclude a specific PUA category. This directive can be used multiple times.
 # See https://github.com/vrtadmin/clamav-faq/blob/master/faq/faq-pua.md for
 # the complete list of PUA categories.
 # Default: Load all categories (if DetectPUA is activated)
 #ExcludePUA NetTool
 #ExcludePUA PWTool

 # Only include a specific PUA category. This directive can be used multiple
 # times.
 # Default: Load all categories (if DetectPUA is activated)
 #IncludePUA Spy
 #IncludePUA Scanner
 #IncludePUA RAT

 # In some cases (eg. complex malware, exploits in graphic files, and others),
 # ClamAV uses special algorithms to provide accurate detection. This option
 # controls the algorithmic detection.
 # Default: yes
 #AlgorithmicDetection yes

 # This option causes memory or nested map scans to dump the content to disk.
 # If you turn on this option, more data is written to disk and is available
 # when the LeaveTemporaryFiles option is enabled.
 #ForceToDisk yes

 # This option allows you to disable the caching feature of the engine. By
 # default, the engine will store an MD5 in a cache of any files that are
 # not flagged as virus or that hit limits checks. Disabling the cache will
 # have a negative performance impact on large scans.
 # Default: no
 #DisableCache yes

 ##
 ## Executable files
 ##

 # PE stands for Portable Executable - it's an executable file format used
 # in all 32 and 64-bit versions of Windows operating systems. This option allows
 # ClamAV to perform a deeper analysis of executable files and it's also
 # required for decompression of popular executable packers such as UPX, FSG,
 # and Petite. If you turn off this option, the original files will still be
 # scanned, but without additional processing.
 # Default: yes
 #ScanPE yes

 # Certain PE files contain an authenticode signature. By default, we check
 # the signature chain in the PE file against a database of trusted and
 # revoked certificates if the file being scanned is marked as a virus.
 # If any certificate in the chain validates against any trusted root, but
 # does not match any revoked certificate, the file is marked as whitelisted.
 # If the file does match a revoked certificate, the file is marked as virus.
 # The following setting completely turns off authenticode verification.
 # Default: no
 #DisableCertCheck yes

 # Executable and Linking Format is a standard format for UN*X executables.
 # This option allows you to control the scanning of ELF files.
 # If you turn off this option, the original files will still be scanned, but
 # without additional processing.
 # Default: yes
 #ScanELF yes

 # With this option clamav will try to detect broken executables (both PE and
 # ELF) and mark them as Broken.Executable.
 # Default: no
 #DetectBrokenExecutables yes


 ##
 ## Documents
 ##

 # This option enables scanning of OLE2 files, such as Microsoft Office
 # documents and .msi files.
 # If you turn off this option, the original files will still be scanned, but
 # without additional processing.
 # Default: yes
 #ScanOLE2 yes

 # With this option enabled OLE2 files with VBA macros, which were not
 # detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
 # Default: no
 #OLE2BlockMacros no

 # This option enables scanning within PDF files.
 # If you turn off this option, the original files will still be scanned, but
 # without decoding and additional processing.
 # Default: yes
 #ScanPDF yes

 # This option enables scanning within SWF files.
 # If you turn off this option, the original files will still be scanned, but
 # without decoding and additional processing.
 # Default: yes
 #ScanSWF yes


 ##
 ## Mail files
 ##

 # Enable internal e-mail scanner.
 # If you turn off this option, the original files will still be scanned, but
 # without parsing individual messages/attachments.
 # Default: yes
 #ScanMail yes

 # Scan RFC1341 messages split over many emails.
 # You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
 # WARNING: This option may open your system to a DoS attack.
 #	   Never use it on loaded servers.
 # Default: no
 #ScanPartialMessages yes

 # With this option enabled ClamAV will try to detect phishing attempts by using
 # signatures.
 # Default: yes
 #PhishingSignatures yes

 # Scan URLs found in mails for phishing attempts using heuristics.
 # Default: yes
 #PhishingScanURLs yes

 # Always block SSL mismatches in URLs, even if the URL isn't in the database.
 # This can lead to false positives.
 #
 # Default: no
 #PhishingAlwaysBlockSSLMismatch no

 # Always block cloaked URLs, even if URL isn't in database.
 # This can lead to false positives.
 #
 # Default: no
 #PhishingAlwaysBlockCloak no

 # Detect partition intersections in raw disk images using heuristics.
 # Default: no
 #PartitionIntersection no

 # Allow heuristic match to take precedence.
 # When enabled, if a heuristic scan (such as phishingScan) detects
 # a possible virus/phish it will stop scan immediately. Recommended, saves CPU
 # scan-time.
 # When disabled, virus/phish detected by heuristic scans will be reported only at
 # the end of a scan. If an archive contains both a heuristically detected
 # virus/phish, and a real malware, the real malware will be reported
 #
 # Keep this disabled if you intend to handle "*.Heuristics.*" viruses
 # differently from "real" malware.
 # If a non-heuristically-detected virus (signature-based) is found first,
 # the scan is interrupted immediately, regardless of this config option.
 #
 # Default: no
 #HeuristicScanPrecedence yes


 ##
 ## Data Loss Prevention (DLP)
 ##

 # Enable the DLP module
 # Default: No
 #StructuredDataDetection yes

 # This option sets the lowest number of Credit Card numbers found in a file
 # to generate a detect.
 # Default: 3
 #StructuredMinCreditCardCount 5

 # This option sets the lowest number of Social Security Numbers found
 # in a file to generate a detect.
 # Default: 3
 #StructuredMinSSNCount 5

 # With this option enabled the DLP module will search for valid
 # SSNs formatted as xxx-yy-zzzz
 # Default: yes
 #StructuredSSNFormatNormal yes

 # With this option enabled the DLP module will search for valid
 # SSNs formatted as xxxyyzzzz
 # Default: no
 #StructuredSSNFormatStripped yes


 ##
 ## HTML
 ##

 # Perform HTML normalisation and decryption of MS Script Encoder code.
 # Default: yes
 # If you turn off this option, the original files will still be scanned, but
 # without additional processing.
 #ScanHTML yes


 ##
 ## Archives
 ##

 # ClamAV can scan within archives and compressed files.
 # If you turn off this option, the original files will still be scanned, but
 # without unpacking and additional processing.
 # Default: yes
 #ScanArchive yes

 # Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
 # Default: no
 #ArchiveBlockEncrypted no


 ##
 ## Limits
 ##

 # The options below protect your system against Denial of Service attacks
 # using archive bombs.

 # This option sets the maximum amount of data to be scanned for each input file.
 # Archives and other containers are recursively extracted and scanned up to this
 # value.
 # Value of 0 disables the limit
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 100M
 #MaxScanSize 150M

 # Files larger than this limit won't be scanned. Affects the input file itself
 # as well as files contained inside it (when the input file is an archive, a
 # document or some other kind of container).
 # Value of 0 disables the limit.
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 25M
 #MaxFileSize 30M

 # Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
 # file, all files within it will also be scanned. This options specifies how
 # deeply the process should be continued.
 # Note: setting this limit too high may result in severe damage to the system.
 # Default: 16
 #MaxRecursion 10

 # Number of files to be scanned within an archive, a document, or any other
 # container file.
 # Value of 0 disables the limit.
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 10000
 #MaxFiles 15000

 # Maximum size of a file to check for embedded PE. Files larger than this value
 # will skip the additional analysis step.
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 10M
 #MaxEmbeddedPE 10M

 # Maximum size of a HTML file to normalize. HTML files larger than this value
 # will not be normalized or scanned.
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 10M
 #MaxHTMLNormalize 10M

 # Maximum size of a normalized HTML file to scan. HTML files larger than this
 # value after normalization will not be scanned.
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 2M
 #MaxHTMLNoTags 2M

 # Maximum size of a script file to normalize. Script content larger than this
 # value will not be normalized or scanned.
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 5M
 #MaxScriptNormalize 5M

 # Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger
 # than this value will skip the step to potentially reanalyze as PE.
 # Note: disabling this limit or setting it too high may result in severe damage
 # to the system.
 # Default: 1M
 #MaxZipTypeRcg 1M

 # This option sets the maximum number of partitions of a raw disk image to be scanned.
 # Raw disk images with more partitions than this value will have up to the value number
 # partitions scanned. Negative values are not allowed.
 # Note: setting this limit too high may result in severe damage or impact performance.
 # Default: 50
 #MaxPartitions 128

 # This option sets the maximum number of icons within a PE to be scanned.
 # PE files with more icons than this value will have up to the value number icons scanned.
 # Negative values are not allowed.
 # WARNING: setting this limit too high may result in severe damage or impact performance.
 # Default: 100
 #MaxIconsPE 200

 ##
 ## On-access Scan Settings
 ##

 # Enable on-access scanning. Currently, this is supported via fanotify.
 # Clamuko/Dazuko support has been deprecated.
 # Default: no
 #ScanOnAccess yes

 # Don't scan files larger than OnAccessMaxFileSize
 # Value of 0 disables the limit.
 # Default: 5M
 #OnAccessMaxFileSize 10M

 # Set the include paths (all files inside them will be scanned). You can have
 # multiple OnAccessIncludePath directives but each directory must be added
 # in a separate line. (On-access scan only)
 # Default: disabled
 #OnAccessIncludePath /home
 #OnAccessIncludePath /students

 # Set the exclude paths. All subdirectories are also excluded.
 # (On-access scan only)
 # Default: disabled
 #OnAccessExcludePath /home/bofh

 # With this option you can whitelist specific UIDs. Processes with these UIDs
 # will be able to access all files.
 # This option can be used multiple times (one per line).
 # Default: disabled
 #OnAccessExcludeUID 0


 ##
 ## Bytecode
 ##

 # With this option enabled ClamAV will load bytecode from the database.
 # It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
 # Default: yes
 #Bytecode yes

 # Set bytecode security level.
 # Possible values:
 #       None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
 #         This value is only available if clamav was built with --enable-debug!
 #       TrustSigned - trust bytecode loaded from signed .c[lv]d files,
 #                insert runtime safety checks for bytecode loaded from other sources
 #       Paranoid - don't trust any bytecode, insert runtime checks for all
 # Recommended: TrustSigned, because bytecode in .cvd files already has these checks
 # Note that by default only signed bytecode is loaded, currently you can only
 # load unsigned bytecode in --enable-debug mode.
 #
 # Default: TrustSigned
 #BytecodeSecurity TrustSigned

 # Set bytecode timeout in miliseconds.
 #
 # Default: 5000
 # BytecodeTimeout 1000

 ##
 ## Statistics gathering and submitting
 ##

 # Enable statistical reporting.
 # Default: no
 #StatsEnabled yes

 # Disable submission of individual PE sections for files flagged as malware.
 # Default: no
 #StatsPEDisabled yes

 # HostID in the form of an UUID to use when submitting statistical information.
 # Default: auto
 #StatsHostID auto

 # Time in seconds to wait for the stats server to come back with a response
 # Default: 10
 #StatsTimeout 10
	# Uncomment this option to enable logging.
	# LogFile must be writable for the user running daemon.
	# A full path is required.
	# Default: disabled
	LogFile /tmp/clamd.log

	# By default the log file is locked for writing - the lock protects against
	# running clamd multiple times (if want to run another clamd, please
	# copy the configuration file, change the LogFile variable, and run
	# the daemon with --config-file option).
	# This option disables log file locking.
	# Default: no
	LogFileUnlock yes

	# Maximum size of the log file.
	# Value of 0 disables the limit.
	# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
	# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
	# in bytes just don't use modifiers. If LogFileMaxSize is enabled, log
	# rotation (the LogRotate option) will always be enabled.
	# Default: 1M
	LogFileMaxSize 2M

	# Log time with each message.
	# Default: no
	LogTime yes

	# Also log clean files. Useful in debugging but drastically increases the
	# log size.
	# Default: no
	#LogClean yes

	# Use system logger (can work together with LogFile).
	# Default: no
	#LogSyslog yes

	# Specify the type of syslog messages - please refer to 'man syslog'
	# for facility names.
	# Default: LOG_LOCAL6
	#LogFacility LOG_MAIL

	# Enable verbose logging.
	# Default: no
	#LogVerbose yes

	# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
	# Default: no
	#LogRotate yes

	# Log additional information about the infected file, such as its
	# size and hash, together with the virus name.
	ExtendedDetectionInfo yes

	# This option allows you to save a process identifier of the listening
	# daemon (main thread).
	# Default: disabled
	PidFile /var/run/clamd.pid

	# Optional path to the global temporary directory.
	# Default: system specific (usually /tmp or /var/tmp).
	TemporaryDirectory /var/tmp

	# Path to the database directory.
	# Default: hardcoded (depends on installation options)
	DatabaseDirectory /var/lib/clamav

	# Only load the official signatures published by the ClamAV project.
	# Default: no
	#OfficialDatabaseOnly no

	# The daemon can work in local mode, network mode or both.
	# Due to security reasons we recommend the local mode.

	# Path to a local socket file the daemon will listen on.
	# Default: disabled (must be specified by a user)
	LocalSocket /tmp/clamd.socket

	# Sets the group ownership on the unix socket.
	# Default: disabled (the primary group of the user running clamd)
	#LocalSocketGroup virusgroup

	# Sets the permissions on the unix socket to the specified mode.
	# Default: disabled (socket is world accessible)
	#LocalSocketMode 660

	# Remove stale socket after unclean shutdown.
	# Default: yes
	#FixStaleSocket yes

	# TCP port address.
	# Default: no
	#TCPSocket 3310

	# TCP address.
	# By default we bind to INADDR_ANY, probably not wise.
	# Enable the following to provide some degree of protection
	# from the outside world. This option can be specified multiple
	# times if you want to listen on multiple IPs. IPv6 is now supported.
	# Default: no
	#TCPAddr 127.0.0.1

	# Maximum length the queue of pending connections may grow to.
	# Default: 200
	#MaxConnectionQueueLength 30

	# Clamd uses FTP-like protocol to receive data from remote clients.
	# If you are using clamav-milter to balance load between remote clamd daemons
	# on firewall servers you may need to tune the options below.

	# Close the connection when the data size limit is exceeded.
	# The value should match your MTA's limit for a maximum attachment size.
	# Default: 25M
	#StreamMaxLength 10M

	# Limit port range.
	# Default: 1024
	#StreamMinPort 30000
	# Default: 2048
	#StreamMaxPort 32000

	# Maximum number of threads running at the same time.
	# Default: 10
	#MaxThreads 20

	# Waiting for data from a client socket will timeout after this time (seconds).
	# Default: 120
	#ReadTimeout 300

	# This option specifies the time (in seconds) after which clamd should
	# timeout if a client doesn't provide any initial command after connecting.
	# Default: 5
	#CommandReadTimeout 5

	# This option specifies how long to wait (in miliseconds) if the send buffer is full.
	# Keep this value low to prevent clamd hanging
	#
	# Default: 500
	#SendBufTimeout 200

	# Maximum number of queued items (including those being processed by MaxThreads threads)
	# It is recommended to have this value at least twice MaxThreads if possible.
	# WARNING: you shouldn't increase this too much to avoid running out of file descriptors,
	# the following condition should hold:
	# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
	#
	# Default: 100
	#MaxQueue 200

	# Waiting for a new job will timeout after this time (seconds).
	# Default: 30
	#IdleTimeout 60

	# Don't scan files and directories matching regex
	# This directive can be used multiple times
	# Default: scan all
	#ExcludePath ^/proc/
	#ExcludePath ^/sys/

	# Maximum depth directories are scanned at.
	# Default: 15
	#MaxDirectoryRecursion 20

	# Follow directory symlinks.
	# Default: no
	#FollowDirectorySymlinks yes

	# Follow regular file symlinks.
	# Default: no
	#FollowFileSymlinks yes

	# Scan files and directories on other filesystems.
	# Default: yes
	#CrossFilesystems yes

	# Perform a database check.
	# Default: 600 (10 min)
	#SelfCheck 600

	# Execute a command when virus is found. In the command string %v will
	# be replaced with the virus name.
	# Default: no
	#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"

	# Run as another user (clamd must be started by root for this option to work)
	# Default: don't drop privileges
	User clamav

	# Initialize supplementary group access (clamd must be started by root).
	# Default: no
	#AllowSupplementaryGroups no

	# Stop daemon when libclamav reports out of memory condition.
	#ExitOnOOM yes

	# Don't fork into background.
	# Default: no
	#Foreground yes

	# Enable debug messages in libclamav.
	# Default: no
	#Debug yes

	# Do not remove temporary files (for debug purposes).
	# Default: no
	#LeaveTemporaryFiles yes

	# Permit use of the ALLMATCHSCAN command. If set to no, clamd will reject
	# any ALLMATCHSCAN command as invalid.
	# Default: yes
	#AllowAllMatchScan no

	# Detect Possibly Unwanted Applications.
	# Default: no
	#DetectPUA yes

	# Exclude a specific PUA category. This directive can be used multiple times.
	# See https://github.com/vrtadmin/clamav-faq/blob/master/faq/faq-pua.md for
	# the complete list of PUA categories.
	# Default: Load all categories (if DetectPUA is activated)
	#ExcludePUA NetTool
	#ExcludePUA PWTool

	# Only include a specific PUA category. This directive can be used multiple
	# times.
	# Default: Load all categories (if DetectPUA is activated)
	#IncludePUA Spy
	#IncludePUA Scanner
	#IncludePUA RAT

	# In some cases (eg. complex malware, exploits in graphic files, and others),
	# ClamAV uses special algorithms to provide accurate detection. This option
	# controls the algorithmic detection.
	# Default: yes
	#AlgorithmicDetection yes

	# This option causes memory or nested map scans to dump the content to disk.
	# If you turn on this option, more data is written to disk and is available
	# when the LeaveTemporaryFiles option is enabled.
	#ForceToDisk yes

	# This option allows you to disable the caching feature of the engine. By
	# default, the engine will store an MD5 in a cache of any files that are
	# not flagged as virus or that hit limits checks. Disabling the cache will
	# have a negative performance impact on large scans.
	# Default: no
	#DisableCache yes

	##
	## Executable files
	##

	# PE stands for Portable Executable - it's an executable file format used
	# in all 32 and 64-bit versions of Windows operating systems. This option allows
	# ClamAV to perform a deeper analysis of executable files and it's also
	# required for decompression of popular executable packers such as UPX, FSG,
	# and Petite. If you turn off this option, the original files will still be
	# scanned, but without additional processing.
	# Default: yes
	#ScanPE yes

	# Certain PE files contain an authenticode signature. By default, we check
	# the signature chain in the PE file against a database of trusted and
	# revoked certificates if the file being scanned is marked as a virus.
	# If any certificate in the chain validates against any trusted root, but
	# does not match any revoked certificate, the file is marked as whitelisted.
	# If the file does match a revoked certificate, the file is marked as virus.
	# The following setting completely turns off authenticode verification.
	# Default: no
	#DisableCertCheck yes

	# Executable and Linking Format is a standard format for UN*X executables.
	# This option allows you to control the scanning of ELF files.
	# If you turn off this option, the original files will still be scanned, but
	# without additional processing.
	# Default: yes
	#ScanELF yes

	# With this option clamav will try to detect broken executables (both PE and
	# ELF) and mark them as Broken.Executable.
	# Default: no
	#DetectBrokenExecutables yes


	##
	## Documents
	##

	# This option enables scanning of OLE2 files, such as Microsoft Office
	# documents and .msi files.
	# If you turn off this option, the original files will still be scanned, but
	# without additional processing.
	# Default: yes
	#ScanOLE2 yes

	# With this option enabled OLE2 files with VBA macros, which were not
	# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
	# Default: no
	#OLE2BlockMacros no

	# This option enables scanning within PDF files.
	# If you turn off this option, the original files will still be scanned, but
	# without decoding and additional processing.
	# Default: yes
	#ScanPDF yes

	# This option enables scanning within SWF files.
	# If you turn off this option, the original files will still be scanned, but
	# without decoding and additional processing.
	# Default: yes
	#ScanSWF yes


	##
	## Mail files
	##

	# Enable internal e-mail scanner.
	# If you turn off this option, the original files will still be scanned, but
	# without parsing individual messages/attachments.
	# Default: yes
	#ScanMail yes

	# Scan RFC1341 messages split over many emails.
	# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
	# WARNING: This option may open your system to a DoS attack.
	# Never use it on loaded servers.
	# Default: no
	#ScanPartialMessages yes

	# With this option enabled ClamAV will try to detect phishing attempts by using
	# signatures.
	# Default: yes
	#PhishingSignatures yes

	# Scan URLs found in mails for phishing attempts using heuristics.
	# Default: yes
	#PhishingScanURLs yes

	# Always block SSL mismatches in URLs, even if the URL isn't in the database.
	# This can lead to false positives.
	#
	# Default: no
	#PhishingAlwaysBlockSSLMismatch no

	# Always block cloaked URLs, even if URL isn't in database.
	# This can lead to false positives.
	#
	# Default: no
	#PhishingAlwaysBlockCloak no

	# Detect partition intersections in raw disk images using heuristics.
	# Default: no
	#PartitionIntersection no

	# Allow heuristic match to take precedence.
	# When enabled, if a heuristic scan (such as phishingScan) detects
	# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
	# scan-time.
	# When disabled, virus/phish detected by heuristic scans will be reported only at
	# the end of a scan. If an archive contains both a heuristically detected
	# virus/phish, and a real malware, the real malware will be reported
	#
	# Keep this disabled if you intend to handle ".Heuristics." viruses
	# differently from "real" malware.
	# If a non-heuristically-detected virus (signature-based) is found first,
	# the scan is interrupted immediately, regardless of this config option.
	#
	# Default: no
	#HeuristicScanPrecedence yes


	##
	## Data Loss Prevention (DLP)
	##

	# Enable the DLP module
	# Default: No
	#StructuredDataDetection yes

	# This option sets the lowest number of Credit Card numbers found in a file
	# to generate a detect.
	# Default: 3
	#StructuredMinCreditCardCount 5

	# This option sets the lowest number of Social Security Numbers found
	# in a file to generate a detect.
	# Default: 3
	#StructuredMinSSNCount 5

	# With this option enabled the DLP module will search for valid
	# SSNs formatted as xxx-yy-zzzz
	# Default: yes
	#StructuredSSNFormatNormal yes

	# With this option enabled the DLP module will search for valid
	# SSNs formatted as xxxyyzzzz
	# Default: no
	#StructuredSSNFormatStripped yes


	##
	## HTML
	##

	# Perform HTML normalisation and decryption of MS Script Encoder code.
	# Default: yes
	# If you turn off this option, the original files will still be scanned, but
	# without additional processing.
	#ScanHTML yes


	##
	## Archives
	##

	# ClamAV can scan within archives and compressed files.
	# If you turn off this option, the original files will still be scanned, but
	# without unpacking and additional processing.
	# Default: yes
	#ScanArchive yes

	# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
	# Default: no
	#ArchiveBlockEncrypted no


	##
	## Limits
	##

	# The options below protect your system against Denial of Service attacks
	# using archive bombs.

	# This option sets the maximum amount of data to be scanned for each input file.
	# Archives and other containers are recursively extracted and scanned up to this
	# value.
	# Value of 0 disables the limit
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 100M
	#MaxScanSize 150M

	# Files larger than this limit won't be scanned. Affects the input file itself
	# as well as files contained inside it (when the input file is an archive, a
	# document or some other kind of container).
	# Value of 0 disables the limit.
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 25M
	#MaxFileSize 30M

	# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
	# file, all files within it will also be scanned. This options specifies how
	# deeply the process should be continued.
	# Note: setting this limit too high may result in severe damage to the system.
	# Default: 16
	#MaxRecursion 10

	# Number of files to be scanned within an archive, a document, or any other
	# container file.
	# Value of 0 disables the limit.
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 10000
	#MaxFiles 15000

	# Maximum size of a file to check for embedded PE. Files larger than this value
	# will skip the additional analysis step.
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 10M
	#MaxEmbeddedPE 10M

	# Maximum size of a HTML file to normalize. HTML files larger than this value
	# will not be normalized or scanned.
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 10M
	#MaxHTMLNormalize 10M

	# Maximum size of a normalized HTML file to scan. HTML files larger than this
	# value after normalization will not be scanned.
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 2M
	#MaxHTMLNoTags 2M

	# Maximum size of a script file to normalize. Script content larger than this
	# value will not be normalized or scanned.
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 5M
	#MaxScriptNormalize 5M

	# Maximum size of a ZIP file to reanalyze type recognition. ZIP files larger
	# than this value will skip the step to potentially reanalyze as PE.
	# Note: disabling this limit or setting it too high may result in severe damage
	# to the system.
	# Default: 1M
	#MaxZipTypeRcg 1M

	# This option sets the maximum number of partitions of a raw disk image to be scanned.
	# Raw disk images with more partitions than this value will have up to the value number
	# partitions scanned. Negative values are not allowed.
	# Note: setting this limit too high may result in severe damage or impact performance.
	# Default: 50
	#MaxPartitions 128

	# This option sets the maximum number of icons within a PE to be scanned.
	# PE files with more icons than this value will have up to the value number icons scanned.
	# Negative values are not allowed.
	# WARNING: setting this limit too high may result in severe damage or impact performance.
	# Default: 100
	#MaxIconsPE 200

	##
	## On-access Scan Settings
	##

	# Enable on-access scanning. Currently, this is supported via fanotify.
	# Clamuko/Dazuko support has been deprecated.
	# Default: no
	#ScanOnAccess yes

	# Don't scan files larger than OnAccessMaxFileSize
	# Value of 0 disables the limit.
	# Default: 5M
	#OnAccessMaxFileSize 10M

	# Set the include paths (all files inside them will be scanned). You can have
	# multiple OnAccessIncludePath directives but each directory must be added
	# in a separate line. (On-access scan only)
	# Default: disabled
	#OnAccessIncludePath /home
	#OnAccessIncludePath /students

	# Set the exclude paths. All subdirectories are also excluded.
	# (On-access scan only)
	# Default: disabled
	#OnAccessExcludePath /home/bofh

	# With this option you can whitelist specific UIDs. Processes with these UIDs
	# will be able to access all files.
	# This option can be used multiple times (one per line).
	# Default: disabled
	#OnAccessExcludeUID 0


	##
	## Bytecode
	##

	# With this option enabled ClamAV will load bytecode from the database.
	# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
	# Default: yes
	#Bytecode yes

	# Set bytecode security level.
	# Possible values:
	# None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
	# This value is only available if clamav was built with --enable-debug!
	# TrustSigned - trust bytecode loaded from signed .c[lv]d files,
	# insert runtime safety checks for bytecode loaded from other sources
	# Paranoid - don't trust any bytecode, insert runtime checks for all
	# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
	# Note that by default only signed bytecode is loaded, currently you can only
	# load unsigned bytecode in --enable-debug mode.
	#
	# Default: TrustSigned
	#BytecodeSecurity TrustSigned

	# Set bytecode timeout in miliseconds.
	#
	# Default: 5000
	# BytecodeTimeout 1000

	##
	## Statistics gathering and submitting
	##

	# Enable statistical reporting.
	# Default: no
	#StatsEnabled yes

	# Disable submission of individual PE sections for files flagged as malware.
	# Default: no
	#StatsPEDisabled yes

	# HostID in the form of an UUID to use when submitting statistical information.
	# Default: auto
	#StatsHostID auto

	# Time in seconds to wait for the stats server to come back with a response
	# Default: 10
	#StatsTimeout 10