poky/scripts/oe-git-proxy

#!/bin/bash

# oe-git-proxy is a simple tool to be via GIT_PROXY_COMMAND. It uses socat
# to make SOCKS5 or HTTPS proxy connections.
# It uses ALL_PROXY or all_proxy or http_proxy to determine the proxy server,
# protocol, and port.
# It uses NO_PROXY to skip using the proxy for a comma delimited list of
# hosts, host globs (*.example.com), IPs, or CIDR masks (192.168.1.0/24). It
# is known to work with both bash and dash shells.
#
# Example ALL_PROXY values:
# ALL_PROXY=socks://socks.example.com:1080
# ALL_PROXY=https://proxy.example.com:8080
#
# Copyright (c) 2013, Intel Corporation.
#
# SPDX-License-Identifier: GPL-2.0-only
#
# AUTHORS
# Darren Hart <dvhart@linux.intel.com>

# disable pathname expansion, NO_PROXY fields could start with "*" or be it
set -f

if [ $# -lt 2 -o "$1" = '--help' -o "$1" = '-h' ] ; then
    echo 'oe-git-proxy: error: the following arguments are required: host port'
    echo 'Usage: oe-git-proxy host port'
    echo ''
    echo 'OpenEmbedded git-proxy - a simple tool to be used via GIT_PROXY_COMMAND.'
    echo 'It uses socat to make SOCKS or HTTPS proxy connections.'
    echo 'It uses ALL_PROXY to determine the proxy server, protocol, and port.'
    echo 'It uses NO_PROXY to skip using the proxy for a comma delimited list'
    echo 'of hosts, host globs (*.example.com), IPs, or CIDR masks (192.168.1.0/24).'
    echo 'It is known to work with both bash and dash shells.runs native tools'
    echo ''
    echo 'arguments:'
    echo '  host                proxy host to use'
    echo '  port                proxy port to use'
    echo ''
    echo 'options:'
    echo '  -h, --help          show this help message and exit'
    echo ''
    exit 2
fi

# Locate the netcat binary
if [ -z "$SOCAT" ]; then
	SOCAT=$(which socat 2>/dev/null)
	if [ $? -ne 0 ]; then
		echo "ERROR: socat binary not in PATH" 1>&2
		exit 1
	fi
fi
METHOD=""

# Test for a valid IPV4 quad with optional bitmask
valid_ipv4() {
	echo $1 | egrep -q "^([1-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(\.([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])){3}(/(3[0-2]|[1-2]?[0-9]))?$"
	return $?
}

# Convert an IPV4 address into a 32bit integer
ipv4_val() {
	IP="$1"
	SHIFT=24
	VAL=0
	for B in $( echo "$IP" | tr '.' ' ' ); do
		VAL=$(($VAL+$(($B<<$SHIFT))))
		SHIFT=$(($SHIFT-8))
	done
	echo "$VAL"
}

# Determine if two IPs are equivalent, or if the CIDR contains the IP
match_ipv4() {
	CIDR=$1
	IP=$2

	if [ -z "${IP%%$CIDR}" ]; then
		return 0
	fi

	# Determine the mask bitlength
	BITS=${CIDR##*/}
	[ "$BITS" != "$CIDR" ] || BITS=32
	if [ -z "$BITS" ]; then
		return 1
	fi

	IPVAL=$(ipv4_val $IP)
	IP2VAL=$(ipv4_val ${CIDR%%/*})

	# OR in the unmasked bits
	for i in $(seq 0 $((32-$BITS))); do
		IP2VAL=$(($IP2VAL|$((1<<$i))))
		IPVAL=$(($IPVAL|$((1<<$i))))
	done

	if [ $IPVAL -eq $IP2VAL ]; then
		return 0
	fi
	return 1
}

# Test to see if GLOB matches HOST
match_host() {
	HOST=$1
	GLOB=$2

	if [ -z "${HOST%%*$GLOB}" ]; then
		return 0
	fi

	# Match by netmask
	if valid_ipv4 $GLOB; then
		for HOST_IP in $(getent ahostsv4 $HOST | grep ' STREAM ' | cut -d ' ' -f 1) ; do
			if valid_ipv4 $HOST_IP; then
				match_ipv4 $GLOB $HOST_IP
				if [ $? -eq 0 ]; then
					return 0
				fi
			fi
		done
	fi

	return 1
}

# If no proxy is set or needed, just connect directly
METHOD="TCP:$1:$2"

[ -z "${ALL_PROXY}" ] && ALL_PROXY=$all_proxy
[ -z "${ALL_PROXY}" ] && ALL_PROXY=$http_proxy

if [ -z "$ALL_PROXY" ]; then
	exec $SOCAT STDIO $METHOD
fi

# Connect directly to hosts in NO_PROXY
for H in $( echo "$NO_PROXY" | tr ',' ' ' ); do
	if match_host $1 $H; then
		exec $SOCAT STDIO $METHOD
	fi
done

# Proxy is necessary, determine protocol, server, and port
# extract protocol
PROTO=${ALL_PROXY%://*}
# strip protocol:// from string
ALL_PROXY=${ALL_PROXY#*://}
# extract host & port parts:
#   1) drop username/password
PROXY=${ALL_PROXY##*@}
#   2) remove optional trailing /?
PROXY=${PROXY%%/*}
#   3) extract optional port
PORT=${PROXY##*:}
if [ "$PORT" = "$PROXY" ]; then
	PORT=""
fi
#   4) remove port
PROXY=${PROXY%%:*}

# extract username & password
PROXYAUTH="${ALL_PROXY%@*}"
[ "$PROXYAUTH" = "$ALL_PROXY" ] && PROXYAUTH=
[ -n "${PROXYAUTH}" ] && PROXYAUTH=",proxyauth=${PROXYAUTH}"

if [ "$PROTO" = "socks" ] || [ "$PROTO" = "socks4a" ]; then
	if [ -z "$PORT" ]; then
		PORT="1080"
	fi
	METHOD="SOCKS4A:$PROXY:$1:$2,socksport=$PORT"
elif [ "$PROTO" = "socks4" ]; then
	if [ -z "$PORT" ]; then
		PORT="1080"
	fi
	METHOD="SOCKS4:$PROXY:$1:$2,socksport=$PORT"
else
	# Assume PROXY (http, https, etc)
	if [ -z "$PORT" ]; then
		PORT="8080"
	fi
	METHOD="PROXY:$PROXY:$1:$2,proxyport=${PORT}${PROXYAUTH}"
fi

exec $SOCAT STDIO "$METHOD"