meta-arm/meta-arm-toolchain/recipes-devtools/gcc/gcc-arm-11.2/0004-64-bit-multilib-hack.patch

From 2fa5c93641b75a662839c1b6eee172b6c481c70e Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Fri, 29 Mar 2013 09:10:06 +0400
Subject: [PATCH] 64-bit multilib hack.

GCC has internal multilib handling code but it assumes a very specific rigid directory
layout. The build system implementation of multilib layout is very generic and allows
complete customisation of the library directories.

This patch is a partial solution to allow any custom directories to be passed into gcc
and handled correctly. It forces gcc to use the base_libdir (which is the current
directory, "."). We need to do this for each multilib that is configured as we don't
know which compiler options may be being passed into the compiler. Since we have a compiler
per mulitlib at this point that isn't an issue.

The one problem is the target compiler is only going to work for the default multlilib at
this point. Ideally we'd figure out which multilibs were being enabled with which paths
and be able to patch these entries with a complete set of correct paths but this we
don't have such code at this point. This is something the target gcc recipe should do
and override these platform defaults in its build config.

Do same for riscv64, aarch64 & arc

RP 15/8/11

Upstream-Status: Inappropriate [OE-Specific]

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Elvis Dowson <elvis.dowson@gmail.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
---
 gcc/config/aarch64/t-aarch64-linux |  8 ++++----
 gcc/config/arc/t-multilib-linux    |  4 ++--
 gcc/config/i386/t-linux64          |  6 ++----
 gcc/config/mips/t-linux64          | 10 +++-------
 gcc/config/riscv/t-linux           |  6 ++++--
 gcc/config/rs6000/t-linux64        |  5 ++---
 6 files changed, 17 insertions(+), 22 deletions(-)

diff --git a/gcc/config/aarch64/t-aarch64-linux b/gcc/config/aarch64/t-aarch64-linux
index 241b0ef20b6..a7dadb2d64f 100644
--- a/gcc/config/aarch64/t-aarch64-linux
+++ b/gcc/config/aarch64/t-aarch64-linux
@@ -21,8 +21,8 @@
 LIB1ASMSRC   = aarch64/lib1funcs.asm
 LIB1ASMFUNCS = _aarch64_sync_cache_range
 
-AARCH_BE = $(if $(findstring TARGET_BIG_ENDIAN_DEFAULT=1, $(tm_defines)),_be)
-MULTILIB_OSDIRNAMES = mabi.lp64=../lib64$(call if_multiarch,:aarch64$(AARCH_BE)-linux-gnu)
-MULTIARCH_DIRNAME = $(call if_multiarch,aarch64$(AARCH_BE)-linux-gnu)
+#AARCH_BE = $(if $(findstring TARGET_BIG_ENDIAN_DEFAULT=1, $(tm_defines)),_be)
+#MULTILIB_OSDIRNAMES = mabi.lp64=../lib64$(call if_multiarch,:aarch64$(AARCH_BE)-linux-gnu)
+#MULTIARCH_DIRNAME = $(call if_multiarch,aarch64$(AARCH_BE)-linux-gnu)
 
-MULTILIB_OSDIRNAMES += mabi.ilp32=../libilp32$(call if_multiarch,:aarch64$(AARCH_BE)-linux-gnu_ilp32)
+#MULTILIB_OSDIRNAMES += mabi.ilp32=../libilp32$(call if_multiarch,:aarch64$(AARCH_BE)-linux-gnu_ilp32)
diff --git a/gcc/config/arc/t-multilib-linux b/gcc/config/arc/t-multilib-linux
index fc3fff640a2..d58e28f6df8 100644
--- a/gcc/config/arc/t-multilib-linux
+++ b/gcc/config/arc/t-multilib-linux
@@ -16,9 +16,9 @@
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 
-MULTILIB_OPTIONS = mcpu=hs/mcpu=archs/mcpu=hs38/mcpu=hs38_linux/mcpu=arc700/mcpu=nps400
+#MULTILIB_OPTIONS = mcpu=hs/mcpu=archs/mcpu=hs38/mcpu=hs38_linux/mcpu=arc700/mcpu=nps400
 
-MULTILIB_DIRNAMES = hs archs hs38 hs38_linux arc700 nps400
+#MULTILIB_DIRNAMES = hs archs hs38 hs38_linux arc700 nps400
 
 # Aliases:
 MULTILIB_MATCHES += mcpu?arc700=mA7
diff --git a/gcc/config/i386/t-linux64 b/gcc/config/i386/t-linux64
index d288b093522..7b5980a9d21 100644
--- a/gcc/config/i386/t-linux64
+++ b/gcc/config/i386/t-linux64
@@ -32,7 +32,5 @@
 #
 comma=,
 MULTILIB_OPTIONS    = $(subst $(comma),/,$(TM_MULTILIB_CONFIG))
-MULTILIB_DIRNAMES   = $(patsubst m%, %, $(subst /, ,$(MULTILIB_OPTIONS)))
-MULTILIB_OSDIRNAMES = m64=../lib64$(call if_multiarch,:x86_64-linux-gnu)
-MULTILIB_OSDIRNAMES+= m32=$(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)$(call if_multiarch,:i386-linux-gnu)
-MULTILIB_OSDIRNAMES+= mx32=../libx32$(call if_multiarch,:x86_64-linux-gnux32)
+MULTILIB_DIRNAMES = . .
+MULTILIB_OSDIRNAMES = ../$(shell basename $(base_libdir)) ../$(shell basename $(base_libdir))
diff --git a/gcc/config/mips/t-linux64 b/gcc/config/mips/t-linux64
index 130e1f04707..3b7eb6b2a2f 100644
--- a/gcc/config/mips/t-linux64
+++ b/gcc/config/mips/t-linux64
@@ -17,10 +17,6 @@
 # <http://www.gnu.org/licenses/>.
 
 MULTILIB_OPTIONS = mabi=n32/mabi=32/mabi=64
-MULTILIB_DIRNAMES = n32 32 64
-MIPS_EL = $(if $(filter %el, $(firstword $(subst -, ,$(target)))),el)
-MIPS_SOFT = $(if $(strip $(filter MASK_SOFT_FLOAT_ABI, $(target_cpu_default)) $(filter soft, $(with_float))),soft)
-MULTILIB_OSDIRNAMES = \
-	../lib32$(call if_multiarch,:mips64$(MIPS_EL)-linux-gnuabin32$(MIPS_SOFT)) \
-	../lib$(call if_multiarch,:mips$(MIPS_EL)-linux-gnu$(MIPS_SOFT)) \
-	../lib64$(call if_multiarch,:mips64$(MIPS_EL)-linux-gnuabi64$(MIPS_SOFT))
+MULTILIB_DIRNAMES = . . .
+MULTILIB_OSDIRNAMES = ../$(shell basename $(base_libdir)) ../$(shell basename $(base_libdir)) ../$(shell basename $(base_libdir))
+
diff --git a/gcc/config/riscv/t-linux b/gcc/config/riscv/t-linux
index 216d2776a18..e4d817621fc 100644
--- a/gcc/config/riscv/t-linux
+++ b/gcc/config/riscv/t-linux
@@ -1,3 +1,5 @@
 # Only XLEN and ABI affect Linux multilib dir names, e.g. /lib32/ilp32d/
-MULTILIB_DIRNAMES := $(patsubst rv32%,lib32,$(patsubst rv64%,lib64,$(MULTILIB_DIRNAMES)))
-MULTILIB_OSDIRNAMES := $(patsubst lib%,../lib%,$(MULTILIB_DIRNAMES))
+#MULTILIB_DIRNAMES := $(patsubst rv32%,lib32,$(patsubst rv64%,lib64,$(MULTILIB_DIRNAMES)))
+MULTILIB_DIRNAMES := . .
+#MULTILIB_OSDIRNAMES := $(patsubst lib%,../lib%,$(MULTILIB_DIRNAMES))
+MULTILIB_OSDIRNAMES := ../$(shell basename $(base_libdir)) ../$(shell basename $(base_libdir))
diff --git a/gcc/config/rs6000/t-linux64 b/gcc/config/rs6000/t-linux64
index e11a118cb5f..4eaffb416fe 100644
--- a/gcc/config/rs6000/t-linux64
+++ b/gcc/config/rs6000/t-linux64
@@ -26,10 +26,9 @@
 # MULTILIB_OSDIRNAMES according to what is found on the target.
 
 MULTILIB_OPTIONS    := m64/m32
-MULTILIB_DIRNAMES   := 64 32
+MULTILIB_DIRNAMES   := . .
 MULTILIB_EXTRA_OPTS := 
-MULTILIB_OSDIRNAMES := m64=../lib64$(call if_multiarch,:powerpc64-linux-gnu)
-MULTILIB_OSDIRNAMES += m32=$(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)$(call if_multiarch,:powerpc-linux-gnu)
+MULTILIB_OSDIRNAMES := ../$(shell basename $(base_libdir)) ../$(shell basename $(base_libdir))
 
 rs6000-linux.o: $(srcdir)/config/rs6000/rs6000-linux.c
 	$(COMPILE) $<