src/rde/rde_handler.cpp - openbmc/bios-bmc-smm-error-logger - Gitiles

 #include "rde/rde_handler.hpp"

 #include <fmt/format.h>

 #include <iostream>

 namespace bios_bmc_smm_error_logger
 {
 namespace rde
 {

 /**
  * @brief CRC-32 divisor.
  *
  * This is equivalent to the one used by IEEE802.3.
  */
 constexpr uint32_t crcDevisor = 0xedb88320;

 RdeCommandHandler::RdeCommandHandler(
     std::unique_ptr<ExternalStorerInterface> exStorer) :
     flagState(RdeDictTransferFlagState::RdeStateIdle),
     exStorer(std::move(exStorer))
 {
     // Initialize CRC table.
     calcCrcTable();
 }

 RdeDecodeStatus
     RdeCommandHandler::decodeRdeCommand(std::span<const uint8_t> rdeCommand,
                                         RdeCommandType type)
 {
     if (type == RdeCommandType::RdeMultiPartReceiveResponse)
     {
         return multiPartReceiveResp(rdeCommand);
     }
     if (type == RdeCommandType::RdeOperationInitRequest)
     {
         return operationInitRequest(rdeCommand);
     }

     fmt::print(stderr, "Invalid command type\n");
     return RdeDecodeStatus::RdeInvalidCommand;
 }

 uint32_t RdeCommandHandler::getDictionaryCount()
 {
     return dictionaryManager.getDictionaryCount();
 }

 RdeDecodeStatus
     RdeCommandHandler::operationInitRequest(std::span<const uint8_t> rdeCommand)
 {
     const RdeOperationInitReqHeader* header =
         reinterpret_cast<const RdeOperationInitReqHeader*>(rdeCommand.data());
     // Check if there is a payload. If not, we are not doing anything.
     if (!header->containsRequestPayload)
     {
         return RdeDecodeStatus::RdeOk;
     }

     if (header->operationType != rdeOpInitOperationUpdate)
     {
         fmt::print(stderr, "Operation not supported\n");
         return RdeDecodeStatus::RdeUnsupportedOperation;
     }

     // OperationInit payload overflows are not suported.
     if (header->sendDataTransferHandle != 0)
     {
         fmt::print(stderr, "Payload should fit in within the request\n");
         return RdeDecodeStatus::RdePayloadOverflow;
     }

     auto schemaDictOrErr = dictionaryManager.getDictionary(header->resourceID);
     if (!schemaDictOrErr)
     {
         fmt::print(stderr, "Schema Dictionary not found for resourceId: {}\n",
                    header->resourceID);
         return RdeDecodeStatus::RdeNoDictionary;
     }

     auto annotationDictOrErr = dictionaryManager.getAnnotationDictionary();
     if (!annotationDictOrErr)
     {
         fmt::print(stderr, "Annotation dictionary not found\n");
         return RdeDecodeStatus::RdeNoDictionary;
     }

     BejDictionaries dictionaries = {
         .schemaDictionary = (*schemaDictOrErr).data(),
         .annotationDictionary = (*annotationDictOrErr).data(),
         // We do not use the error dictionary.
         .errorDictionary = nullptr,
     };

     // Soon after header, we have bejLocator field. Then we have the encoded
     // data.
     const uint8_t* encodedPldmBlock = rdeCommand.data() +
                                       sizeof(RdeOperationInitReqHeader) +
                                       header->operationLocatorLength;

     // Decoded the data.
     if (decoder.decode(dictionaries, std::span(encodedPldmBlock,
                                                header->requestPayloadLength)) !=
         0)
     {
         fmt::print(stderr, "BEJ decoding failed.\n");
         return RdeDecodeStatus::RdeBejDecodingError;
     }

     // Post the output.
     if (!exStorer->publishJson(decoder.getOutput()))
     {
         fmt::print(stderr, "Failed to write to ExternalStorer.\n");
         return RdeDecodeStatus::RdeExternalStorerError;
     }
     return RdeDecodeStatus::RdeOk;
 }

 RdeDecodeStatus
     RdeCommandHandler::multiPartReceiveResp(std::span<const uint8_t> rdeCommand)
 {
     const MultipartReceiveResHeader* header =
         reinterpret_cast<const MultipartReceiveResHeader*>(rdeCommand.data());

     // This is a hack to get the resource ID for the dictionary data. Even
     // though nextDataTransferHandle field is supposed to be used for something
     // else, BIOS is using it to specify the resource ID corresponding to the
     // dictionary data.
     uint32_t resourceId = header->nextDataTransferHandle;

     // data points to the payload of the MultipartReceive.
     const uint8_t* data = rdeCommand.data() + sizeof(MultipartReceiveResHeader);
     RdeDecodeStatus ret = RdeDecodeStatus::RdeOk;

     switch (header->transferFlag)
     {
         case rdeMRecFlagStart:
             handleFlagStart(header, data, resourceId);
             break;
         case rdeMRecFlagMiddle:
             ret = handleFlagMiddle(header, data, resourceId);
             break;
         case rdeMRecFlagEnd:
             ret = handleFlagEnd(rdeCommand, header, data, resourceId);
             break;
         case rdeMRecFlagStartAndEnd:
             ret = handleFlagStartAndEnd(rdeCommand, header, data, resourceId);
             break;
         default:
             fmt::print(stderr, "Invalid transfer flag: {}\n",
                        header->transferFlag);
             ret = RdeDecodeStatus::RdeInvalidCommand;
     }

     // If there is a failure, this assignment is not useful. So we can do it
     // even if there is a failure.
     prevDictResourceId = resourceId;
     return ret;
 }

 void RdeCommandHandler::calcCrcTable()
 {
     for (uint32_t i = 0; i < UINT8_MAX + 1; ++i)
     {
         uint32_t rem = i;
         for (uint8_t k = 0; k < 8; ++k)
         {
             rem = (rem & 1) ? (rem >> 1) ^ crcDevisor : rem >> 1;
         }
         crcTable[i] = rem;
     }
 }

 void RdeCommandHandler::updateCrc(std::span<const uint8_t> stream)
 {
     for (uint32_t i = 0; i < stream.size_bytes(); ++i)
     {
         crc = crcTable[(crc ^ stream[i]) & 0xff] ^ (crc >> 8);
     }
 }

 uint32_t RdeCommandHandler::finalChecksum()
 {
     return (crc ^ 0xFFFFFFFF);
 }

 RdeDecodeStatus
     RdeCommandHandler::handleCrc(std::span<const uint8_t> multiReceiveRespCmd)
 {
     const MultipartReceiveResHeader* header =
         reinterpret_cast<const MultipartReceiveResHeader*>(
             multiReceiveRespCmd.data());
     const uint8_t* checksumPtr = multiReceiveRespCmd.data() +
                                  sizeof(MultipartReceiveResHeader) +
                                  header->dataLengthBytes;
     uint32_t checksum = checksumPtr[0] | (checksumPtr[1] << 8) |
                         (checksumPtr[2] << 16) | (checksumPtr[3] << 24);

     if (finalChecksum() != checksum)
     {
         fmt::print(stderr, "Checksum failed. Ex: {} Calculated: {}\n", checksum,
                    finalChecksum());
         dictionaryManager.invalidateDictionaries();
         return RdeDecodeStatus::RdeInvalidChecksum;
     }
     return RdeDecodeStatus::RdeOk;
 }

 void RdeCommandHandler::handleFlagStart(const MultipartReceiveResHeader* header,
                                         const uint8_t* data,
                                         uint32_t resourceId)
 {
     // This is a beginning of a dictionary. Reset CRC.
     crc = 0xFFFFFFFF;
     std::span dataS(data, header->dataLengthBytes);
     dictionaryManager.startDictionaryEntry(resourceId, dataS);
     // Start checksum calculation only for the data portion.
     updateCrc(dataS);
     flagState = RdeDictTransferFlagState::RdeStateStartRecvd;
 }

 RdeDecodeStatus
     RdeCommandHandler::handleFlagMiddle(const MultipartReceiveResHeader* header,
                                         const uint8_t* data,
                                         uint32_t resourceId)
 {
     if (flagState != RdeDictTransferFlagState::RdeStateStartRecvd)
     {
         fmt::print(
             stderr,
             "Invalid dictionary packet order. Need start before middle.\n");
         return RdeDecodeStatus::RdeInvalidPktOrder;
     }

     std::span dataS(data, header->dataLengthBytes);
     if (prevDictResourceId != resourceId)
     {
         // Start of a new dictionary. Mark previous dictionary as
         // complete.
         dictionaryManager.markDataComplete(prevDictResourceId);
         dictionaryManager.startDictionaryEntry(resourceId, dataS);
     }
     else
     {
         // Not a new dictionary. Add the received data to the existing
         // dictionary.
         if (!dictionaryManager.addDictionaryData(resourceId, dataS))
         {
             fmt::print(stderr,
                        "Failed to add dictionary data: ResourceId: {}\n",
                        resourceId);
             return RdeDecodeStatus::RdeDictionaryError;
         }
     }
     // Continue checksum calculation only for the data portion.
     updateCrc(dataS);
     return RdeDecodeStatus::RdeOk;
 }

 RdeDecodeStatus
     RdeCommandHandler::handleFlagEnd(std::span<const uint8_t> rdeCommand,
                                      const MultipartReceiveResHeader* header,
                                      const uint8_t* data, uint32_t resourceId)
 {
     if (flagState != RdeDictTransferFlagState::RdeStateStartRecvd)
     {
         fmt::print(
             stderr,
             "Invalid dictionary packet order. Need start before middle.\n");
         return RdeDecodeStatus::RdeInvalidPktOrder;
     }
     flagState = RdeDictTransferFlagState::RdeStateIdle;

     std::span dataS(data, header->dataLengthBytes);
     if (prevDictResourceId != resourceId)
     {
         // Start of a new dictionary. Mark previous dictionary as
         // complete.
         dictionaryManager.markDataComplete(prevDictResourceId);
         dictionaryManager.startDictionaryEntry(resourceId, dataS);
     }
     else
     {
         if (!dictionaryManager.addDictionaryData(resourceId, dataS))
         {
             fmt::print(stderr,
                        "Failed to add dictionary data: ResourceId: {}\n",
                        resourceId);
             return RdeDecodeStatus::RdeDictionaryError;
         }
     }
     dictionaryManager.markDataComplete(resourceId);

     // Continue checksum calculation only for the data portion. At the end of
     // data, we will have the DataIntegrityChecksum field. So omit that when
     // calculating checksum.
     updateCrc(dataS);
     auto ret = handleCrc(rdeCommand);
     if (ret != RdeDecodeStatus::RdeOk)
     {
         return ret;
     }
     return RdeDecodeStatus::RdeStopFlagReceived;
 }

 RdeDecodeStatus RdeCommandHandler::handleFlagStartAndEnd(
     std::span<const uint8_t> rdeCommand,
     const MultipartReceiveResHeader* header, const uint8_t* data,
     uint32_t resourceId)
 {
     // This is a beginning of a dictionary. Reset CRC.
     crc = 0xFFFFFFFF;
     // This is a beginning and end of a dictionary.
     dictionaryManager.startDictionaryEntry(
         resourceId, std::span(data, header->dataLengthBytes));
     dictionaryManager.markDataComplete(resourceId);
     flagState = RdeDictTransferFlagState::RdeStateIdle;

     // Do checksum calculation only for the data portion. At the end of data, we
     // will have the DataIntegrityChecksum field. So omit that when calculating
     // checksum.
     updateCrc(std::span(data, header->dataLengthBytes));

     auto ret = handleCrc(rdeCommand);
     if (ret != RdeDecodeStatus::RdeOk)
     {
         return ret;
     }
     return RdeDecodeStatus::RdeStopFlagReceived;
 }

 } // namespace rde
 } // namespace bios_bmc_smm_error_logger
	#include "rde/rde_handler.hpp"

	#include <fmt/format.h>

	#include <iostream>

	namespace bios_bmc_smm_error_logger
	{
	namespace rde
	{

	/**
	* @brief CRC-32 divisor.
	*
	* This is equivalent to the one used by IEEE802.3.
	*/
	constexpr uint32_t crcDevisor = 0xedb88320;

	RdeCommandHandler::RdeCommandHandler(
	std::unique_ptr<ExternalStorerInterface> exStorer) :
	flagState(RdeDictTransferFlagState::RdeStateIdle),
	exStorer(std::move(exStorer))
	{
	// Initialize CRC table.
	calcCrcTable();
	}

	RdeDecodeStatus
	RdeCommandHandler::decodeRdeCommand(std::span<const uint8_t> rdeCommand,
	RdeCommandType type)
	{
	if (type == RdeCommandType::RdeMultiPartReceiveResponse)
	{
	return multiPartReceiveResp(rdeCommand);
	}
	if (type == RdeCommandType::RdeOperationInitRequest)
	{
	return operationInitRequest(rdeCommand);
	}

	fmt::print(stderr, "Invalid command type\n");
	return RdeDecodeStatus::RdeInvalidCommand;
	}

	uint32_t RdeCommandHandler::getDictionaryCount()
	{
	return dictionaryManager.getDictionaryCount();
	}

	RdeDecodeStatus
	RdeCommandHandler::operationInitRequest(std::span<const uint8_t> rdeCommand)
	{
	const RdeOperationInitReqHeader* header =
	reinterpret_cast<const RdeOperationInitReqHeader*>(rdeCommand.data());
	// Check if there is a payload. If not, we are not doing anything.
	if (!header->containsRequestPayload)
	{
	return RdeDecodeStatus::RdeOk;
	}

	if (header->operationType != rdeOpInitOperationUpdate)
	{
	fmt::print(stderr, "Operation not supported\n");
	return RdeDecodeStatus::RdeUnsupportedOperation;
	}

	// OperationInit payload overflows are not suported.
	if (header->sendDataTransferHandle != 0)
	{
	fmt::print(stderr, "Payload should fit in within the request\n");
	return RdeDecodeStatus::RdePayloadOverflow;
	}

	auto schemaDictOrErr = dictionaryManager.getDictionary(header->resourceID);
	if (!schemaDictOrErr)
	{
	fmt::print(stderr, "Schema Dictionary not found for resourceId: {}\n",
	header->resourceID);
	return RdeDecodeStatus::RdeNoDictionary;
	}

	auto annotationDictOrErr = dictionaryManager.getAnnotationDictionary();
	if (!annotationDictOrErr)
	{
	fmt::print(stderr, "Annotation dictionary not found\n");
	return RdeDecodeStatus::RdeNoDictionary;
	}

	BejDictionaries dictionaries = {
	.schemaDictionary = (*schemaDictOrErr).data(),
	.annotationDictionary = (*annotationDictOrErr).data(),
	// We do not use the error dictionary.
	.errorDictionary = nullptr,
	};

	// Soon after header, we have bejLocator field. Then we have the encoded
	// data.
	const uint8_t* encodedPldmBlock = rdeCommand.data() +
	sizeof(RdeOperationInitReqHeader) +
	header->operationLocatorLength;

	// Decoded the data.
	if (decoder.decode(dictionaries, std::span(encodedPldmBlock,
	header->requestPayloadLength)) !=
	0)
	{
	fmt::print(stderr, "BEJ decoding failed.\n");
	return RdeDecodeStatus::RdeBejDecodingError;
	}

	// Post the output.
	if (!exStorer->publishJson(decoder.getOutput()))
	{
	fmt::print(stderr, "Failed to write to ExternalStorer.\n");
	return RdeDecodeStatus::RdeExternalStorerError;
	}
	return RdeDecodeStatus::RdeOk;
	}

	RdeDecodeStatus
	RdeCommandHandler::multiPartReceiveResp(std::span<const uint8_t> rdeCommand)
	{
	const MultipartReceiveResHeader* header =
	reinterpret_cast<const MultipartReceiveResHeader*>(rdeCommand.data());

	// This is a hack to get the resource ID for the dictionary data. Even
	// though nextDataTransferHandle field is supposed to be used for something
	// else, BIOS is using it to specify the resource ID corresponding to the
	// dictionary data.
	uint32_t resourceId = header->nextDataTransferHandle;

	// data points to the payload of the MultipartReceive.
	const uint8_t* data = rdeCommand.data() + sizeof(MultipartReceiveResHeader);
	RdeDecodeStatus ret = RdeDecodeStatus::RdeOk;

	switch (header->transferFlag)
	{
	case rdeMRecFlagStart:
	handleFlagStart(header, data, resourceId);
	break;
	case rdeMRecFlagMiddle:
	ret = handleFlagMiddle(header, data, resourceId);
	break;
	case rdeMRecFlagEnd:
	ret = handleFlagEnd(rdeCommand, header, data, resourceId);
	break;
	case rdeMRecFlagStartAndEnd:
	ret = handleFlagStartAndEnd(rdeCommand, header, data, resourceId);
	break;
	default:
	fmt::print(stderr, "Invalid transfer flag: {}\n",
	header->transferFlag);
	ret = RdeDecodeStatus::RdeInvalidCommand;
	}

	// If there is a failure, this assignment is not useful. So we can do it
	// even if there is a failure.
	prevDictResourceId = resourceId;
	return ret;
	}

	void RdeCommandHandler::calcCrcTable()
	{
	for (uint32_t i = 0; i < UINT8_MAX + 1; ++i)
	{
	uint32_t rem = i;
	for (uint8_t k = 0; k < 8; ++k)
	{
	rem = (rem & 1) ? (rem >> 1) ^ crcDevisor : rem >> 1;
	}
	crcTable[i] = rem;
	}
	}

	void RdeCommandHandler::updateCrc(std::span<const uint8_t> stream)
	{
	for (uint32_t i = 0; i < stream.size_bytes(); ++i)
	{
	crc = crcTable[(crc ^ stream[i]) & 0xff] ^ (crc >> 8);
	}
	}

	uint32_t RdeCommandHandler::finalChecksum()
	{
	return (crc ^ 0xFFFFFFFF);
	}

	RdeDecodeStatus
	RdeCommandHandler::handleCrc(std::span<const uint8_t> multiReceiveRespCmd)
	{
	const MultipartReceiveResHeader* header =
	reinterpret_cast<const MultipartReceiveResHeader*>(
	multiReceiveRespCmd.data());
	const uint8_t* checksumPtr = multiReceiveRespCmd.data() +
	sizeof(MultipartReceiveResHeader) +
	header->dataLengthBytes;
	uint32_t checksum = checksumPtr[0] \| (checksumPtr[1] << 8) \|
	(checksumPtr[2] << 16) \| (checksumPtr[3] << 24);

	if (finalChecksum() != checksum)
	{
	fmt::print(stderr, "Checksum failed. Ex: {} Calculated: {}\n", checksum,
	finalChecksum());
	dictionaryManager.invalidateDictionaries();
	return RdeDecodeStatus::RdeInvalidChecksum;
	}
	return RdeDecodeStatus::RdeOk;
	}

	void RdeCommandHandler::handleFlagStart(const MultipartReceiveResHeader* header,
	const uint8_t* data,
	uint32_t resourceId)
	{
	// This is a beginning of a dictionary. Reset CRC.
	crc = 0xFFFFFFFF;
	std::span dataS(data, header->dataLengthBytes);
	dictionaryManager.startDictionaryEntry(resourceId, dataS);
	// Start checksum calculation only for the data portion.
	updateCrc(dataS);
	flagState = RdeDictTransferFlagState::RdeStateStartRecvd;
	}

	RdeDecodeStatus
	RdeCommandHandler::handleFlagMiddle(const MultipartReceiveResHeader* header,
	const uint8_t* data,
	uint32_t resourceId)
	{
	if (flagState != RdeDictTransferFlagState::RdeStateStartRecvd)
	{
	fmt::print(
	stderr,
	"Invalid dictionary packet order. Need start before middle.\n");
	return RdeDecodeStatus::RdeInvalidPktOrder;
	}

	std::span dataS(data, header->dataLengthBytes);
	if (prevDictResourceId != resourceId)
	{
	// Start of a new dictionary. Mark previous dictionary as
	// complete.
	dictionaryManager.markDataComplete(prevDictResourceId);
	dictionaryManager.startDictionaryEntry(resourceId, dataS);
	}
	else
	{
	// Not a new dictionary. Add the received data to the existing
	// dictionary.
	if (!dictionaryManager.addDictionaryData(resourceId, dataS))
	{
	fmt::print(stderr,
	"Failed to add dictionary data: ResourceId: {}\n",
	resourceId);
	return RdeDecodeStatus::RdeDictionaryError;
	}
	}
	// Continue checksum calculation only for the data portion.
	updateCrc(dataS);
	return RdeDecodeStatus::RdeOk;
	}

	RdeDecodeStatus
	RdeCommandHandler::handleFlagEnd(std::span<const uint8_t> rdeCommand,
	const MultipartReceiveResHeader* header,
	const uint8_t* data, uint32_t resourceId)
	{
	if (flagState != RdeDictTransferFlagState::RdeStateStartRecvd)
	{
	fmt::print(
	stderr,
	"Invalid dictionary packet order. Need start before middle.\n");
	return RdeDecodeStatus::RdeInvalidPktOrder;
	}
	flagState = RdeDictTransferFlagState::RdeStateIdle;

	std::span dataS(data, header->dataLengthBytes);
	if (prevDictResourceId != resourceId)
	{
	// Start of a new dictionary. Mark previous dictionary as
	// complete.
	dictionaryManager.markDataComplete(prevDictResourceId);
	dictionaryManager.startDictionaryEntry(resourceId, dataS);
	}
	else
	{
	if (!dictionaryManager.addDictionaryData(resourceId, dataS))
	{
	fmt::print(stderr,
	"Failed to add dictionary data: ResourceId: {}\n",
	resourceId);
	return RdeDecodeStatus::RdeDictionaryError;
	}
	}
	dictionaryManager.markDataComplete(resourceId);

	// Continue checksum calculation only for the data portion. At the end of
	// data, we will have the DataIntegrityChecksum field. So omit that when
	// calculating checksum.
	updateCrc(dataS);
	auto ret = handleCrc(rdeCommand);
	if (ret != RdeDecodeStatus::RdeOk)
	{
	return ret;
	}
	return RdeDecodeStatus::RdeStopFlagReceived;
	}

	RdeDecodeStatus RdeCommandHandler::handleFlagStartAndEnd(
	std::span<const uint8_t> rdeCommand,
	const MultipartReceiveResHeader* header, const uint8_t* data,
	uint32_t resourceId)
	{
	// This is a beginning of a dictionary. Reset CRC.
	crc = 0xFFFFFFFF;
	// This is a beginning and end of a dictionary.
	dictionaryManager.startDictionaryEntry(
	resourceId, std::span(data, header->dataLengthBytes));
	dictionaryManager.markDataComplete(resourceId);
	flagState = RdeDictTransferFlagState::RdeStateIdle;

	// Do checksum calculation only for the data portion. At the end of data, we
	// will have the DataIntegrityChecksum field. So omit that when calculating
	// checksum.
	updateCrc(std::span(data, header->dataLengthBytes));

	auto ret = handleCrc(rdeCommand);
	if (ret != RdeDecodeStatus::RdeOk)
	{
	return ret;
	}
	return RdeDecodeStatus::RdeStopFlagReceived;
	}

	} // namespace rde
	} // namespace bios_bmc_smm_error_logger