| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| #pragma once |
| |
| #include <dbus_singleton.hpp> |
| #include <error_messages.hpp> |
| #include <node.hpp> |
| #include <utils/json_utils.hpp> |
| #include <boost/container/flat_map.hpp> |
| |
| namespace redfish { |
| |
| /** |
| * DBus types primitives for several generic DBus interfaces |
| * TODO(Pawel) consider move this to separate file into boost::dbus |
| */ |
| using PropertiesMapType = boost::container::flat_map< |
| std::string, |
| sdbusplus::message::variant<std::string, bool, uint8_t, int16_t, uint16_t, |
| int32_t, uint32_t, int64_t, uint64_t, double>>; |
| |
| using GetManagedObjectsType = boost::container::flat_map< |
| sdbusplus::message::object_path, |
| boost::container::flat_map< |
| std::string, |
| boost::container::flat_map< |
| std::string, sdbusplus::message::variant< |
| std::string, bool, uint8_t, int16_t, uint16_t, |
| int32_t, uint32_t, int64_t, uint64_t, double>>>>; |
| |
| /** |
| * Structure for keeping IPv4 data required by Redfish |
| * TODO(Pawel) consider change everything to ptr, or to non-ptr values. |
| */ |
| struct IPv4AddressData { |
| std::string id; |
| const std::string *address; |
| const std::string *domain; |
| const std::string *gateway; |
| std::string netmask; |
| std::string origin; |
| bool global; |
| /** |
| * @brief Operator< to enable sorting |
| * |
| * @param[in] obj Object to compare with |
| * |
| * @return This object id < supplied object id |
| */ |
| bool operator<(const IPv4AddressData &obj) const { return (id < obj.id); } |
| }; |
| |
| /** |
| * Structure for keeping basic single Ethernet Interface information |
| * available from DBus |
| */ |
| struct EthernetInterfaceData { |
| const unsigned int *speed; |
| const bool *auto_neg; |
| const std::string *hostname; |
| const std::string *default_gateway; |
| const std::string *mac_address; |
| const unsigned int *vlan_id; |
| }; |
| |
| /** |
| * OnDemandEthernetProvider |
| * Ethernet provider class that retrieves data directly from dbus, before |
| * setting it into JSON output. This does not cache any data. |
| * |
| * TODO(Pawel) |
| * This perhaps shall be different file, which has to be chosen on compile time |
| * depending on OEM needs |
| */ |
| class OnDemandEthernetProvider { |
| private: |
| // Consts that may have influence on EthernetProvider performance/memory usage |
| const size_t MAX_IPV4_ADDRESSES_PER_INTERFACE = 10; |
| |
| // Helper function that allows to extract GetAllPropertiesType from |
| // GetManagedObjectsType, based on object path, and interface name |
| const PropertiesMapType *extractInterfaceProperties( |
| const sdbusplus::message::object_path &objpath, |
| const std::string &interface, const GetManagedObjectsType &dbus_data) { |
| const auto &dbus_obj = dbus_data.find(objpath); |
| if (dbus_obj != dbus_data.end()) { |
| const auto &iface = dbus_obj->second.find(interface); |
| if (iface != dbus_obj->second.end()) { |
| return &iface->second; |
| } |
| } |
| return nullptr; |
| } |
| |
| // Helper Wrapper that does inline object_path conversion from string |
| // into sdbusplus::message::object_path type |
| inline const PropertiesMapType *extractInterfaceProperties( |
| const std::string &objpath, const std::string &interface, |
| const GetManagedObjectsType &dbus_data) { |
| const auto &dbus_obj = sdbusplus::message::object_path{objpath}; |
| return extractInterfaceProperties(dbus_obj, interface, dbus_data); |
| } |
| |
| // Helper function that allows to get pointer to the property from |
| // GetAllPropertiesType native, or extracted by GetAllPropertiesType |
| template <typename T> |
| inline T const *const extractProperty(const PropertiesMapType &properties, |
| const std::string &name) { |
| const auto &property = properties.find(name); |
| if (property != properties.end()) { |
| return mapbox::get_ptr<const T>(property->second); |
| } |
| return nullptr; |
| } |
| // TODO(Pawel) Consider to move the above functions to dbus |
| // generic_interfaces.hpp |
| |
| // Helper function that extracts data from several dbus objects and several |
| // interfaces required by single ethernet interface instance |
| void extractEthernetInterfaceData(const std::string ðiface_id, |
| const GetManagedObjectsType &dbus_data, |
| EthernetInterfaceData ð_data) { |
| // Extract data that contains MAC Address |
| const PropertiesMapType *mac_properties = extractInterfaceProperties( |
| "/xyz/openbmc_project/network/" + ethiface_id, |
| "xyz.openbmc_project.Network.MACAddress", dbus_data); |
| |
| if (mac_properties != nullptr) { |
| eth_data.mac_address = |
| extractProperty<std::string>(*mac_properties, "MACAddress"); |
| } |
| |
| const PropertiesMapType *vlan_properties = extractInterfaceProperties( |
| "/xyz/openbmc_project/network/" + ethiface_id, |
| "xyz.openbmc_project.Network.VLAN", dbus_data); |
| |
| if (vlan_properties != nullptr) { |
| eth_data.vlan_id = extractProperty<unsigned int>(*vlan_properties, "Id"); |
| } |
| |
| // Extract data that contains link information (auto negotiation and speed) |
| const PropertiesMapType *eth_properties = extractInterfaceProperties( |
| "/xyz/openbmc_project/network/" + ethiface_id, |
| "xyz.openbmc_project.Network.EthernetInterface", dbus_data); |
| |
| if (eth_properties != nullptr) { |
| eth_data.auto_neg = extractProperty<bool>(*eth_properties, "AutoNeg"); |
| eth_data.speed = extractProperty<unsigned int>(*eth_properties, "Speed"); |
| } |
| |
| // Extract data that contains network config (HostName and DefaultGW) |
| const PropertiesMapType *config_properties = extractInterfaceProperties( |
| "/xyz/openbmc_project/network/config", |
| "xyz.openbmc_project.Network.SystemConfiguration", dbus_data); |
| |
| if (config_properties != nullptr) { |
| eth_data.hostname = |
| extractProperty<std::string>(*config_properties, "HostName"); |
| eth_data.default_gateway = |
| extractProperty<std::string>(*config_properties, "DefaultGateway"); |
| } |
| } |
| |
| // Helper function that changes bits netmask notation (i.e. /24) |
| // into full dot notation |
| inline std::string getNetmask(unsigned int bits) { |
| uint32_t value = 0xffffffff << (32 - bits); |
| std::string netmask = std::to_string((value >> 24) & 0xff) + "." + |
| std::to_string((value >> 16) & 0xff) + "." + |
| std::to_string((value >> 8) & 0xff) + "." + |
| std::to_string(value & 0xff); |
| return netmask; |
| } |
| |
| // Helper function that extracts data for single ethernet ipv4 address |
| void extractIPv4Data(const std::string ðiface_id, |
| const GetManagedObjectsType &dbus_data, |
| std::vector<IPv4AddressData> &ipv4_config) { |
| const std::string pathStart = |
| "/xyz/openbmc_project/network/" + ethiface_id + "/ipv4/"; |
| |
| // Since there might be several IPv4 configurations aligned with |
| // single ethernet interface, loop over all of them |
| for (auto &objpath : dbus_data) { |
| // Check if proper patter for object path appears |
| if (boost::starts_with( |
| static_cast<const std::string &>(objpath.first), |
| "/xyz/openbmc_project/network/" + ethiface_id + "/ipv4/")) { |
| // and get approrpiate interface |
| const auto &interface = |
| objpath.second.find("xyz.openbmc_project.Network.IP"); |
| if (interface != objpath.second.end()) { |
| // Make a properties 'shortcut', to make everything more readable |
| const PropertiesMapType &properties = interface->second; |
| // Instance IPv4AddressData structure, and set as appropriate |
| IPv4AddressData ipv4_address; |
| |
| ipv4_address.id = static_cast<const std::string &>(objpath.first) |
| .substr(pathStart.size()); |
| |
| // IPv4 address |
| ipv4_address.address = |
| extractProperty<std::string>(properties, "Address"); |
| // IPv4 gateway |
| ipv4_address.gateway = |
| extractProperty<std::string>(properties, "Gateway"); |
| |
| // Origin is kind of DBus object so fetch pointer... |
| const std::string *origin = |
| extractProperty<std::string>(properties, "Origin"); |
| if (origin != nullptr) { |
| ipv4_address.origin = |
| translateAddressOriginBetweenDBusAndRedfish(origin, true, true); |
| } |
| |
| // Netmask is presented as PrefixLength |
| const auto *mask = |
| extractProperty<uint8_t>(properties, "PrefixLength"); |
| if (mask != nullptr) { |
| // convert it to the string |
| ipv4_address.netmask = getNetmask(*mask); |
| } |
| |
| // Attach IPv4 only if address is present |
| if (ipv4_address.address != nullptr) { |
| // Check if given address is local, or global |
| if (boost::starts_with(*ipv4_address.address, "169.254")) { |
| ipv4_address.global = false; |
| } else { |
| ipv4_address.global = true; |
| } |
| ipv4_config.emplace_back(std::move(ipv4_address)); |
| } |
| } |
| } |
| } |
| |
| /** |
| * We have to sort this vector and ensure that order of IPv4 addresses |
| * is consistent between GETs to allow modification and deletion in PATCHes |
| */ |
| std::sort(ipv4_config.begin(), ipv4_config.end()); |
| } |
| |
| static const constexpr int ipV4AddressSectionsCount = 4; |
| |
| public: |
| /** |
| * @brief Creates VLAN for given interface with given Id through D-Bus |
| * |
| * @param[in] ifaceId Id of interface for which VLAN will be created |
| * @param[in] inputVlanId ID of the new VLAN |
| * @param[in] callback Function that will be called after the operation |
| * |
| * @return None. |
| */ |
| template <typename CallbackFunc> |
| void createVlan(const std::string &ifaceId, const uint64_t &inputVlanId, |
| CallbackFunc &&callback) { |
| crow::connections::system_bus->async_method_call( |
| callback, "xyz.openbmc_project.Network", "/xyz/openbmc_project/network", |
| "xyz.openbmc_project.Network.VLAN.Create", "VLAN", ifaceId, |
| static_cast<uint32_t>(inputVlanId)); |
| }; |
| |
| /** |
| * @brief Sets given Id on the given VLAN interface through D-Bus |
| * |
| * @param[in] ifaceId Id of VLAN interface that should be modified |
| * @param[in] inputVlanId New ID of the VLAN |
| * @param[in] callback Function that will be called after the operation |
| * |
| * @return None. |
| */ |
| template <typename CallbackFunc> |
| static void changeVlanId(const std::string &ifaceId, |
| const uint32_t &inputVlanId, |
| CallbackFunc &&callback) { |
| crow::connections::system_bus->async_method_call( |
| callback, "xyz.openbmc_project.Network", |
| std::string("/xyz/openbmc_project/network/") + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.VLAN", "Id", |
| sdbusplus::message::variant<uint32_t>(inputVlanId)); |
| }; |
| |
| /** |
| * @brief Helper function that verifies IP address to check if it is in |
| * proper format. If bits pointer is provided, also calculates active |
| * bit count for Subnet Mask. |
| * |
| * @param[in] ip IP that will be verified |
| * @param[out] bits Calculated mask in bits notation |
| * |
| * @return true in case of success, false otherwise |
| */ |
| bool ipv4VerifyIpAndGetBitcount(const std::string &ip, |
| uint8_t *bits = nullptr) { |
| std::vector<std::string> bytesInMask; |
| |
| boost::split(bytesInMask, ip, boost::is_any_of(".")); |
| |
| if (bytesInMask.size() != ipV4AddressSectionsCount) { |
| return false; |
| } |
| |
| if (bits != nullptr) { |
| *bits = 0; |
| } |
| |
| char *endPtr; |
| long previousValue = 255; |
| bool firstZeroInByteHit; |
| for (const std::string &byte : bytesInMask) { |
| if (byte.empty()) { |
| return false; |
| } |
| |
| // Use strtol instead of stroi to avoid exceptions |
| long value = std::strtol(byte.c_str(), &endPtr, 10); |
| |
| // endPtr should point to the end of the string, otherwise given string |
| // is not 100% number |
| if (*endPtr != '\0') { |
| return false; |
| } |
| |
| // Value should be contained in byte |
| if (value < 0 || value > 255) { |
| return false; |
| } |
| |
| if (bits != nullptr) { |
| // Mask has to be continuous between bytes |
| if (previousValue != 255 && value != 0) { |
| return false; |
| } |
| |
| // Mask has to be continuous inside bytes |
| firstZeroInByteHit = false; |
| |
| // Count bits |
| for (int bitIdx = 7; bitIdx >= 0; bitIdx--) { |
| if (value & (1 << bitIdx)) { |
| if (firstZeroInByteHit) { |
| // Continuity not preserved |
| return false; |
| } else { |
| (*bits)++; |
| } |
| } else { |
| firstZeroInByteHit = true; |
| } |
| } |
| } |
| |
| previousValue = value; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * @brief Changes IPv4 address type property (Address, Gateway) |
| * |
| * @param[in] ifaceId Id of interface whose IP should be modified |
| * @param[in] ipIdx Index of IP in input array that should be modified |
| * @param[in] ipHash DBus Hash id of modified IP |
| * @param[in] name Name of field in JSON representation |
| * @param[in] newValue New value that should be written |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return true if give IP is valid and has been sent do D-Bus, false |
| * otherwise |
| */ |
| void changeIPv4AddressProperty(const std::string &ifaceId, int ipIdx, |
| const std::string &ipHash, |
| const std::string &name, |
| const std::string &newValue, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| auto callback = [ |
| asyncResp, ipIdx{std::move(ipIdx)}, name{std::move(name)}, |
| newValue{std::move(newValue)} |
| ](const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, messages::internalError(), |
| "/IPv4Addresses/" + std::to_string(ipIdx) + "/" + name); |
| } else { |
| asyncResp->res.json_value["IPv4Addresses"][ipIdx][name] = newValue; |
| } |
| }; |
| |
| crow::connections::system_bus->async_method_call( |
| std::move(callback), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId + "/ipv4/" + ipHash, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.IP", name, |
| sdbusplus::message::variant<std::string>(newValue)); |
| }; |
| |
| /** |
| * @brief Changes IPv4 address origin property |
| * |
| * @param[in] ifaceId Id of interface whose IP should be modified |
| * @param[in] ipIdx Index of IP in input array that should be modified |
| * @param[in] ipHash DBus Hash id of modified IP |
| * @param[in] newValue New value in Redfish format |
| * @param[in] newValueDbus New value in D-Bus format |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return true if give IP is valid and has been sent do D-Bus, false |
| * otherwise |
| */ |
| void changeIPv4Origin(const std::string &ifaceId, int ipIdx, |
| const std::string &ipHash, const std::string &newValue, |
| const std::string &newValueDbus, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| auto callback = |
| [ asyncResp, ipIdx{std::move(ipIdx)}, |
| newValue{std::move(newValue)} ](const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, messages::internalError(), |
| "/IPv4Addresses/" + std::to_string(ipIdx) + "/AddressOrigin"); |
| } else { |
| asyncResp->res.json_value["IPv4Addresses"][ipIdx]["AddressOrigin"] = |
| newValue; |
| } |
| }; |
| |
| crow::connections::system_bus->async_method_call( |
| std::move(callback), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId + "/ipv4/" + ipHash, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.IP", "Origin", |
| sdbusplus::message::variant<std::string>(newValueDbus)); |
| }; |
| |
| /** |
| * @brief Modifies SubnetMask for given IP |
| * |
| * @param[in] ifaceId Id of interface whose IP should be modified |
| * @param[in] ipIdx Index of IP in input array that should be modified |
| * @param[in] ipHash DBus Hash id of modified IP |
| * @param[in] newValueStr Mask in dot notation as string |
| * @param[in] newValue Mask as PrefixLength in bitcount |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| void changeIPv4SubnetMaskProperty( |
| const std::string &ifaceId, int ipIdx, const std::string &ipHash, |
| const std::string &newValueStr, uint8_t &newValue, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| auto callback = [ |
| asyncResp, ipIdx{std::move(ipIdx)}, newValueStr{std::move(newValueStr)} |
| ](const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, messages::internalError(), |
| "/IPv4Addresses/" + std::to_string(ipIdx) + "/SubnetMask"); |
| } else { |
| asyncResp->res.json_value["IPv4Addresses"][ipIdx]["SubnetMask"] = |
| newValueStr; |
| } |
| }; |
| |
| crow::connections::system_bus->async_method_call( |
| std::move(callback), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId + "/ipv4/" + ipHash, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.IP", "PrefixLength", |
| sdbusplus::message::variant<uint8_t>(newValue)); |
| }; |
| |
| /** |
| * @brief Disables VLAN with given ifaceId |
| * |
| * @param[in] ifaceId Id of VLAN interface that should be disabled |
| * @param[in] callback Function that will be called after the operation |
| * |
| * @return None. |
| */ |
| template <typename CallbackFunc> |
| static void disableVlan(const std::string &ifaceId, CallbackFunc &&callback) { |
| crow::connections::system_bus->async_method_call( |
| callback, "xyz.openbmc_project.Network", |
| std::string("/xyz/openbmc_project/network/") + ifaceId, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| }; |
| |
| /** |
| * @brief Sets given HostName of the machine through D-Bus |
| * |
| * @param[in] newHostname New name that HostName will be changed to |
| * @param[in] callback Function that will be called after the operation |
| * |
| * @return None. |
| */ |
| template <typename CallbackFunc> |
| void setHostName(const std::string &newHostname, CallbackFunc &&callback) { |
| crow::connections::system_bus->async_method_call( |
| callback, "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/config", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.SystemConfiguration", "HostName", |
| sdbusplus::message::variant<std::string>(newHostname)); |
| }; |
| |
| /** |
| * @brief Deletes given IPv4 |
| * |
| * @param[in] ifaceId Id of interface whose IP should be deleted |
| * @param[in] ipIdx Index of IP in input array that should be deleted |
| * @param[in] ipHash DBus Hash id of IP that should be deleted |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| void deleteIPv4(const std::string &ifaceId, const std::string &ipHash, |
| unsigned int ipIdx, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| crow::connections::system_bus->async_method_call( |
| [ ipIdx{std::move(ipIdx)}, asyncResp{std::move(asyncResp)} ]( |
| const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, messages::internalError(), |
| "/IPv4Addresses/" + std::to_string(ipIdx) + "/"); |
| } else { |
| asyncResp->res.json_value["IPv4Addresses"][ipIdx] = nullptr; |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId + "/ipv4/" + ipHash, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| } |
| |
| /** |
| * @brief Creates IPv4 with given data |
| * |
| * @param[in] ifaceId Id of interface whose IP should be deleted |
| * @param[in] ipIdx Index of IP in input array that should be deleted |
| * @param[in] ipHash DBus Hash id of IP that should be deleted |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| void createIPv4(const std::string &ifaceId, unsigned int ipIdx, |
| uint8_t subnetMask, const std::string &gateway, |
| const std::string &address, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| auto createIpHandler = [ |
| ipIdx{std::move(ipIdx)}, asyncResp{std::move(asyncResp)} |
| ](const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, messages::internalError(), |
| "/IPv4Addresses/" + std::to_string(ipIdx) + "/"); |
| } |
| }; |
| |
| crow::connections::system_bus->async_method_call( |
| std::move(createIpHandler), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "xyz.openbmc_project.Network.IP.Create", "IP", |
| "xyz.openbmc_project.Network.IP.Protocol.IPv4", address, subnetMask, |
| gateway); |
| } |
| |
| /** |
| * @brief Translates Address Origin value from D-Bus to Redfish format and |
| * vice-versa |
| * |
| * @param[in] inputOrigin Input value that should be translated |
| * @param[in] isIPv4 True for IPv4 origins, False for IPv6 |
| * @param[in] isFromDBus True for DBus->Redfish conversion, false for reverse |
| * |
| * @return Empty string in case of failure, translated value otherwise |
| */ |
| std::string translateAddressOriginBetweenDBusAndRedfish( |
| const std::string *inputOrigin, bool isIPv4, bool isFromDBus) { |
| // Invalid pointer |
| if (inputOrigin == nullptr) { |
| return ""; |
| } |
| |
| static const constexpr unsigned int firstIPv4OnlyIdx = 1; |
| static const constexpr unsigned int firstIPv6OnlyIdx = 3; |
| |
| std::array<std::pair<const char *, const char *>, 6> translationTable{ |
| {{"xyz.openbmc_project.Network.IP.AddressOrigin.Static", "Static"}, |
| {"xyz.openbmc_project.Network.IP.AddressOrigin.DHCP", "DHCP"}, |
| {"xyz.openbmc_project.Network.IP.AddressOrigin.LinkLocal", |
| "IPv4LinkLocal"}, |
| {"xyz.openbmc_project.Network.IP.AddressOrigin.DHCP", "DHCPv6"}, |
| {"xyz.openbmc_project.Network.IP.AddressOrigin.LinkLocal", |
| "LinkLocal"}, |
| {"xyz.openbmc_project.Network.IP.AddressOrigin.SLAAC", "SLAAC"}}}; |
| |
| for (unsigned int i = 0; i < translationTable.size(); i++) { |
| // Skip unrelated |
| if (isIPv4 && i >= firstIPv6OnlyIdx) break; |
| if (!isIPv4 && i >= firstIPv4OnlyIdx && i < firstIPv6OnlyIdx) continue; |
| |
| // When translating D-Bus to Redfish compare input to first element |
| if (isFromDBus && translationTable[i].first == *inputOrigin) |
| return translationTable[i].second; |
| |
| // When translating Redfish to D-Bus compare input to second element |
| if (!isFromDBus && translationTable[i].second == *inputOrigin) |
| return translationTable[i].first; |
| } |
| |
| // If we are still here, that means that value has not been found |
| return ""; |
| } |
| |
| /** |
| * Function that retrieves all properties for given Ethernet Interface |
| * Object |
| * from EntityManager Network Manager |
| * @param ethiface_id a eth interface id to query on DBus |
| * @param callback a function that shall be called to convert Dbus output |
| * into JSON |
| */ |
| template <typename CallbackFunc> |
| void getEthernetIfaceData(const std::string ðiface_id, |
| CallbackFunc &&callback) { |
| crow::connections::system_bus->async_method_call( |
| [ |
| this, ethiface_id{std::move(ethiface_id)}, |
| callback{std::move(callback)} |
| ](const boost::system::error_code error_code, |
| const GetManagedObjectsType &resp) { |
| |
| EthernetInterfaceData eth_data{}; |
| std::vector<IPv4AddressData> ipv4_data; |
| ipv4_data.reserve(MAX_IPV4_ADDRESSES_PER_INTERFACE); |
| |
| if (error_code) { |
| // Something wrong on DBus, the error_code is not important at |
| // this moment, just return success=false, and empty output. Since |
| // size of vector may vary depending on information from Network |
| // Manager, and empty output could not be treated same way as |
| // error. |
| callback(false, eth_data, ipv4_data); |
| return; |
| } |
| |
| // Find interface |
| if (resp.find("/xyz/openbmc_project/network/" + ethiface_id) == |
| resp.end()) { |
| // Interface has not been found |
| callback(false, eth_data, ipv4_data); |
| return; |
| } |
| |
| extractEthernetInterfaceData(ethiface_id, resp, eth_data); |
| extractIPv4Data(ethiface_id, resp, ipv4_data); |
| |
| // Fix global GW |
| for (IPv4AddressData &ipv4 : ipv4_data) { |
| if ((ipv4.global) && |
| ((ipv4.gateway == nullptr) || (*ipv4.gateway == "0.0.0.0"))) { |
| ipv4.gateway = eth_data.default_gateway; |
| } |
| } |
| |
| // Finally make a callback with usefull data |
| callback(true, eth_data, ipv4_data); |
| }, |
| "xyz.openbmc_project.Network", "/xyz/openbmc_project/network", |
| "org.freedesktop.DBus.ObjectManager", "GetManagedObjects"); |
| }; |
| |
| /** |
| * Function that retrieves all Ethernet Interfaces available through Network |
| * Manager |
| * @param callback a function that shall be called to convert Dbus output into |
| * JSON. |
| */ |
| template <typename CallbackFunc> |
| void getEthernetIfaceList(CallbackFunc &&callback) { |
| crow::connections::system_bus->async_method_call( |
| [ this, callback{std::move(callback)} ]( |
| const boost::system::error_code error_code, |
| GetManagedObjectsType &resp) { |
| // Callback requires vector<string> to retrieve all available ethernet |
| // interfaces |
| std::vector<std::string> iface_list; |
| iface_list.reserve(resp.size()); |
| if (error_code) { |
| // Something wrong on DBus, the error_code is not important at this |
| // moment, just return success=false, and empty output. Since size |
| // of vector may vary depending on information from Network Manager, |
| // and empty output could not be treated same way as error. |
| callback(false, iface_list); |
| return; |
| } |
| |
| // Iterate over all retrieved ObjectPaths. |
| for (auto &objpath : resp) { |
| // And all interfaces available for certain ObjectPath. |
| for (auto &interface : objpath.second) { |
| // If interface is xyz.openbmc_project.Network.EthernetInterface, |
| // this is what we're looking for. |
| if (interface.first == |
| "xyz.openbmc_project.Network.EthernetInterface") { |
| // Cut out everyting until last "/", ... |
| const std::string &iface_id = |
| static_cast<const std::string &>(objpath.first); |
| std::size_t last_pos = iface_id.rfind("/"); |
| if (last_pos != std::string::npos) { |
| // and put it into output vector. |
| iface_list.emplace_back(iface_id.substr(last_pos + 1)); |
| } |
| } |
| } |
| } |
| // Finally make a callback with useful data |
| callback(true, iface_list); |
| }, |
| "xyz.openbmc_project.Network", "/xyz/openbmc_project/network", |
| "org.freedesktop.DBus.ObjectManager", "GetManagedObjects"); |
| }; |
| }; |
| |
| /** |
| * EthernetCollection derived class for delivering Ethernet Collection Schema |
| */ |
| class EthernetCollection : public Node { |
| public: |
| // TODO(Pawel) Remove line from below, where we assume that there is only one |
| // manager called openbmc This shall be generic, but requires to update |
| // GetSubroutes method |
| EthernetCollection(CrowApp &app) |
| : Node(app, "/redfish/v1/Managers/openbmc/EthernetInterfaces/") { |
| Node::json["@odata.type"] = |
| "#EthernetInterfaceCollection.EthernetInterfaceCollection"; |
| Node::json["@odata.context"] = |
| "/redfish/v1/" |
| "$metadata#EthernetInterfaceCollection.EthernetInterfaceCollection"; |
| Node::json["@odata.id"] = "/redfish/v1/Managers/openbmc/EthernetInterfaces"; |
| Node::json["Name"] = "Ethernet Network Interface Collection"; |
| Node::json["Description"] = |
| "Collection of EthernetInterfaces for this Manager"; |
| |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| private: |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| // TODO(Pawel) this shall be parametrized call to get EthernetInterfaces for |
| // any Manager, not only hardcoded 'openbmc'. |
| std::string manager_id = "openbmc"; |
| |
| // Get eth interface list, and call the below callback for JSON preparation |
| ethernet_provider.getEthernetIfaceList( |
| [&, manager_id{std::move(manager_id)} ]( |
| const bool &success, const std::vector<std::string> &iface_list) { |
| if (success) { |
| nlohmann::json iface_array = nlohmann::json::array(); |
| for (const std::string &iface_item : iface_list) { |
| iface_array.push_back( |
| {{"@odata.id", "/redfish/v1/Managers/" + manager_id + |
| "/EthernetInterfaces/" + iface_item}}); |
| } |
| Node::json["Members"] = iface_array; |
| Node::json["Members@odata.count"] = iface_array.size(); |
| Node::json["@odata.id"] = |
| "/redfish/v1/Managers/" + manager_id + "/EthernetInterfaces"; |
| res.json_value = Node::json; |
| } else { |
| // No success, best what we can do is return INTERNALL ERROR |
| res.result(boost::beast::http::status::internal_server_error); |
| } |
| res.end(); |
| }); |
| } |
| |
| // Ethernet Provider object |
| // TODO(Pawel) consider move it to singleton |
| OnDemandEthernetProvider ethernet_provider; |
| }; |
| |
| /** |
| * EthernetInterface derived class for delivering Ethernet Schema |
| */ |
| class EthernetInterface : public Node { |
| public: |
| /* |
| * Default Constructor |
| */ |
| // TODO(Pawel) Remove line from below, where we assume that there is only one |
| // manager called openbmc This shall be generic, but requires to update |
| // GetSubroutes method |
| EthernetInterface(CrowApp &app) |
| : Node(app, "/redfish/v1/Managers/openbmc/EthernetInterfaces/<str>/", |
| std::string()) { |
| Node::json["@odata.type"] = "#EthernetInterface.v1_2_0.EthernetInterface"; |
| Node::json["@odata.context"] = |
| "/redfish/v1/$metadata#EthernetInterface.EthernetInterface"; |
| Node::json["Name"] = "Manager Ethernet Interface"; |
| Node::json["Description"] = "Management Network Interface"; |
| |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| // TODO(kkowalsk) Find a suitable class/namespace for this |
| static void handleVlanPatch(const std::string &ifaceId, |
| const nlohmann::json &input, |
| const EthernetInterfaceData ð_data, |
| const std::string &pathPrefix, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| if (!input.is_object()) { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueTypeError(input.dump(), "VLAN"), pathPrefix); |
| return; |
| } |
| |
| const std::string pathStart = (pathPrefix == "/") ? "" : pathPrefix; |
| nlohmann::json ¶msJson = |
| (pathPrefix == "/") |
| ? asyncResp->res.json_value |
| : asyncResp->res.json_value[nlohmann::json_pointer<nlohmann::json>( |
| pathPrefix)]; |
| bool inputVlanEnabled; |
| uint64_t inputVlanId; |
| |
| json_util::Result inputVlanEnabledState = json_util::getBool( |
| "VLANEnable", input, inputVlanEnabled, |
| static_cast<int>(json_util::MessageSetting::TYPE_ERROR), |
| asyncResp->res.json_value, std::string(pathStart + "/VLANEnable")); |
| json_util::Result inputVlanIdState = json_util::getUnsigned( |
| "VLANId", input, inputVlanId, |
| static_cast<int>(json_util::MessageSetting::TYPE_ERROR), |
| asyncResp->res.json_value, std::string(pathStart + "/VLANId")); |
| bool inputInvalid = false; |
| |
| // Do not proceed if fields in VLAN object were of wrong type |
| if (inputVlanEnabledState == json_util::Result::WRONG_TYPE || |
| inputVlanIdState == json_util::Result::WRONG_TYPE) { |
| return; |
| } |
| |
| // Verify input |
| if (eth_data.vlan_id == nullptr) { |
| // This interface is not a VLAN. Cannot do anything with it |
| // TODO(kkowalsk) Change this message |
| messages::addMessageToJson(asyncResp->res.json_value, |
| messages::propertyMissing("VLANEnable"), |
| pathPrefix); |
| |
| inputInvalid = true; |
| } else { |
| // Load actual data into field values if they were not provided |
| if (inputVlanEnabledState == json_util::Result::NOT_EXIST) { |
| inputVlanEnabled = true; |
| } |
| |
| if (inputVlanIdState == json_util::Result::NOT_EXIST) { |
| inputVlanId = *eth_data.vlan_id; |
| } |
| } |
| |
| // Do not proceed if input has not been valid |
| if (inputInvalid) { |
| return; |
| } |
| |
| // VLAN is configured on the interface |
| if (inputVlanEnabled == true && inputVlanId != *eth_data.vlan_id) { |
| // Change VLAN Id |
| paramsJson["VLANId"] = inputVlanId; |
| OnDemandEthernetProvider::changeVlanId( |
| ifaceId, static_cast<uint32_t>(inputVlanId), |
| [&, asyncResp, pathPrefx{std::move(pathPrefix)} ]( |
| const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson(asyncResp->res.json_value, |
| messages::internalError(), pathPrefix); |
| } else { |
| paramsJson["VLANEnable"] = true; |
| } |
| }); |
| } else if (inputVlanEnabled == false) { |
| // Disable VLAN |
| OnDemandEthernetProvider::disableVlan( |
| ifaceId, [&, asyncResp, pathPrefx{std::move(pathPrefix)} ]( |
| const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson(asyncResp->res.json_value, |
| messages::internalError(), pathPrefix); |
| } else { |
| paramsJson["VLANEnable"] = false; |
| } |
| }); |
| } |
| } |
| |
| private: |
| void handleHostnamePatch(const nlohmann::json &input, |
| const EthernetInterfaceData ð_data, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| if (input.is_string()) { |
| std::string newHostname = input.get<std::string>(); |
| |
| if (eth_data.hostname == nullptr || newHostname != *eth_data.hostname) { |
| // Change hostname |
| ethernet_provider.setHostName( |
| newHostname, |
| [asyncResp, newHostname](const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToJson(asyncResp->res.json_value, |
| messages::internalError(), |
| "/HostName"); |
| } else { |
| asyncResp->res.json_value["HostName"] = newHostname; |
| } |
| }); |
| } |
| } else { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueTypeError(input.dump(), "HostName"), |
| "/HostName"); |
| } |
| } |
| |
| void handleIPv4Patch(const std::string &ifaceId, const nlohmann::json &input, |
| const std::vector<IPv4AddressData> &ipv4_data, |
| const std::shared_ptr<AsyncResp> &asyncResp) { |
| if (!input.is_array()) { |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueTypeError(input.dump(), "IPv4Addresses"), |
| "/IPv4Addresses"); |
| return; |
| } |
| |
| // According to Redfish PATCH definition, size must be at least equal |
| if (input.size() < ipv4_data.size()) { |
| // TODO(kkowalsk) This should be a message indicating that not enough |
| // data has been provided |
| messages::addMessageToJson(asyncResp->res.json_value, |
| messages::internalError(), "/IPv4Addresses"); |
| return; |
| } |
| |
| json_util::Result addressFieldState; |
| json_util::Result subnetMaskFieldState; |
| json_util::Result addressOriginFieldState; |
| json_util::Result gatewayFieldState; |
| const std::string *addressFieldValue; |
| const std::string *subnetMaskFieldValue; |
| const std::string *addressOriginFieldValue = nullptr; |
| const std::string *gatewayFieldValue; |
| uint8_t subnetMaskAsPrefixLength; |
| std::string addressOriginInDBusFormat; |
| |
| bool errorDetected = false; |
| for (unsigned int entryIdx = 0; entryIdx < input.size(); entryIdx++) { |
| // Check that entry is not of some unexpected type |
| if (!input[entryIdx].is_object() && !input[entryIdx].is_null()) { |
| // Invalid object type |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueTypeError(input[entryIdx].dump(), |
| "IPv4Address"), |
| "/IPv4Addresses/" + std::to_string(entryIdx)); |
| |
| continue; |
| } |
| |
| // Try to load fields |
| addressFieldState = json_util::getString( |
| "Address", input[entryIdx], addressFieldValue, |
| static_cast<uint8_t>(json_util::MessageSetting::TYPE_ERROR), |
| asyncResp->res.json_value, |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/Address"); |
| subnetMaskFieldState = json_util::getString( |
| "SubnetMask", input[entryIdx], subnetMaskFieldValue, |
| static_cast<uint8_t>(json_util::MessageSetting::TYPE_ERROR), |
| asyncResp->res.json_value, |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/SubnetMask"); |
| addressOriginFieldState = json_util::getString( |
| "AddressOrigin", input[entryIdx], addressOriginFieldValue, |
| static_cast<uint8_t>(json_util::MessageSetting::TYPE_ERROR), |
| asyncResp->res.json_value, |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/AddressOrigin"); |
| gatewayFieldState = json_util::getString( |
| "Gateway", input[entryIdx], gatewayFieldValue, |
| static_cast<uint8_t>(json_util::MessageSetting::TYPE_ERROR), |
| asyncResp->res.json_value, |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/Gateway"); |
| |
| if (addressFieldState == json_util::Result::WRONG_TYPE || |
| subnetMaskFieldState == json_util::Result::WRONG_TYPE || |
| addressOriginFieldState == json_util::Result::WRONG_TYPE || |
| gatewayFieldState == json_util::Result::WRONG_TYPE) { |
| return; |
| } |
| |
| if (addressFieldState == json_util::Result::SUCCESS && |
| !ethernet_provider.ipv4VerifyIpAndGetBitcount(*addressFieldValue)) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueFormatError(*addressFieldValue, "Address"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/Address"); |
| } |
| |
| if (subnetMaskFieldState == json_util::Result::SUCCESS && |
| !ethernet_provider.ipv4VerifyIpAndGetBitcount( |
| *subnetMaskFieldValue, &subnetMaskAsPrefixLength)) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueFormatError(*subnetMaskFieldValue, |
| "SubnetMask"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/SubnetMask"); |
| } |
| |
| // Get Address origin in proper format |
| addressOriginInDBusFormat = |
| ethernet_provider.translateAddressOriginBetweenDBusAndRedfish( |
| addressOriginFieldValue, true, false); |
| |
| if (addressOriginFieldState == json_util::Result::SUCCESS && |
| addressOriginInDBusFormat.empty()) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueNotInList(*addressOriginFieldValue, |
| "AddressOrigin"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/AddressOrigin"); |
| } |
| |
| if (gatewayFieldState == json_util::Result::SUCCESS && |
| !ethernet_provider.ipv4VerifyIpAndGetBitcount(*gatewayFieldValue)) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyValueFormatError(*gatewayFieldValue, "Gateway"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/Gateway"); |
| } |
| |
| // If any error occured do not proceed with current entry, but do not |
| // end loop |
| if (errorDetected) { |
| errorDetected = false; |
| continue; |
| } |
| |
| if (entryIdx >= ipv4_data.size()) { |
| asyncResp->res.json_value["IPv4Addresses"][entryIdx] = input[entryIdx]; |
| |
| // Verify that all field were provided |
| if (addressFieldState == json_util::Result::NOT_EXIST) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, messages::propertyMissing("Address"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/Address"); |
| } |
| |
| if (subnetMaskFieldState == json_util::Result::NOT_EXIST) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyMissing("SubnetMask"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/SubnetMask"); |
| } |
| |
| if (addressOriginFieldState == json_util::Result::NOT_EXIST) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, |
| messages::propertyMissing("AddressOrigin"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/AddressOrigin"); |
| } |
| |
| if (gatewayFieldState == json_util::Result::NOT_EXIST) { |
| errorDetected = true; |
| messages::addMessageToJson( |
| asyncResp->res.json_value, messages::propertyMissing("Gateway"), |
| "/IPv4Addresses/" + std::to_string(entryIdx) + "/Gateway"); |
| } |
| |
| // If any error occured do not proceed with current entry, but do not |
| // end loop |
| if (errorDetected) { |
| errorDetected = false; |
| continue; |
| } |
| |
| // Create IPv4 with provided data |
| ethernet_provider.createIPv4( |
| ifaceId, entryIdx, subnetMaskAsPrefixLength, *gatewayFieldValue, |
| *addressFieldValue, asyncResp); |
| } else { |
| // Existing object that should be modified/deleted/remain unchanged |
| if (input[entryIdx].is_null()) { |
| // Object should be deleted |
| ethernet_provider.deleteIPv4(ifaceId, ipv4_data[entryIdx].id, |
| entryIdx, asyncResp); |
| } else if (input[entryIdx].is_object()) { |
| if (input[entryIdx].size() == 0) { |
| // Object shall remain unchanged |
| continue; |
| } |
| |
| // Apply changes |
| if (addressFieldState == json_util::Result::SUCCESS && |
| ipv4_data[entryIdx].address != nullptr && |
| *ipv4_data[entryIdx].address != *addressFieldValue) { |
| ethernet_provider.changeIPv4AddressProperty( |
| ifaceId, entryIdx, ipv4_data[entryIdx].id, "Address", |
| *addressFieldValue, asyncResp); |
| } |
| |
| if (subnetMaskFieldState == json_util::Result::SUCCESS && |
| ipv4_data[entryIdx].netmask != *subnetMaskFieldValue) { |
| ethernet_provider.changeIPv4SubnetMaskProperty( |
| ifaceId, entryIdx, ipv4_data[entryIdx].id, |
| *subnetMaskFieldValue, subnetMaskAsPrefixLength, asyncResp); |
| } |
| |
| if (addressOriginFieldState == json_util::Result::SUCCESS && |
| ipv4_data[entryIdx].origin != *addressFieldValue) { |
| ethernet_provider.changeIPv4Origin( |
| ifaceId, entryIdx, ipv4_data[entryIdx].id, |
| *addressOriginFieldValue, addressOriginInDBusFormat, asyncResp); |
| } |
| |
| if (gatewayFieldState == json_util::Result::SUCCESS && |
| ipv4_data[entryIdx].gateway != nullptr && |
| *ipv4_data[entryIdx].gateway != *gatewayFieldValue) { |
| ethernet_provider.changeIPv4AddressProperty( |
| ifaceId, entryIdx, ipv4_data[entryIdx].id, "Gateway", |
| *gatewayFieldValue, asyncResp); |
| } |
| } |
| } |
| } |
| } |
| |
| nlohmann::json parseInterfaceData( |
| const std::string &iface_id, const EthernetInterfaceData ð_data, |
| const std::vector<IPv4AddressData> &ipv4_data) { |
| // Copy JSON object to avoid race condition |
| nlohmann::json json_response(Node::json); |
| |
| // Fill out obvious data... |
| json_response["Id"] = iface_id; |
| json_response["@odata.id"] = |
| "/redfish/v1/Managers/openbmc/EthernetInterfaces/" + iface_id; |
| |
| // ... then the one from DBus, regarding eth iface... |
| if (eth_data.speed != nullptr) json_response["SpeedMbps"] = *eth_data.speed; |
| |
| if (eth_data.mac_address != nullptr) |
| json_response["MACAddress"] = *eth_data.mac_address; |
| |
| if (eth_data.hostname != nullptr) |
| json_response["HostName"] = *eth_data.hostname; |
| |
| if (eth_data.vlan_id != nullptr) { |
| nlohmann::json &vlanObj = json_response["VLAN"]; |
| vlanObj["VLANEnable"] = true; |
| vlanObj["VLANId"] = *eth_data.vlan_id; |
| } else { |
| nlohmann::json &vlanObj = json_response["VLANs"]; |
| vlanObj["@odata.id"] = |
| "/redfish/v1/Managers/openbmc/EthernetInterfaces/" + iface_id + |
| "/VLANs"; |
| } |
| |
| // ... at last, check if there are IPv4 data and prepare appropriate |
| // collection |
| if (ipv4_data.size() > 0) { |
| nlohmann::json ipv4_array = nlohmann::json::array(); |
| for (auto &ipv4_config : ipv4_data) { |
| nlohmann::json json_ipv4; |
| if (ipv4_config.address != nullptr) { |
| json_ipv4["Address"] = *ipv4_config.address; |
| if (ipv4_config.gateway != nullptr) |
| json_ipv4["Gateway"] = *ipv4_config.gateway; |
| |
| json_ipv4["AddressOrigin"] = ipv4_config.origin; |
| json_ipv4["SubnetMask"] = ipv4_config.netmask; |
| |
| ipv4_array.push_back(std::move(json_ipv4)); |
| } |
| } |
| json_response["IPv4Addresses"] = std::move(ipv4_array); |
| } |
| |
| return json_response; |
| } |
| |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| // TODO(Pawel) this shall be parametrized call (two params) to get |
| // EthernetInterfaces for any Manager, not only hardcoded 'openbmc'. |
| // Check if there is required param, truly entering this shall be |
| // impossible. |
| if (params.size() != 1) { |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| return; |
| } |
| |
| const std::string &iface_id = params[0]; |
| |
| // Get single eth interface data, and call the below callback for JSON |
| // preparation |
| ethernet_provider.getEthernetIfaceData( |
| iface_id, [&, iface_id](const bool &success, |
| const EthernetInterfaceData ð_data, |
| const std::vector<IPv4AddressData> &ipv4_data) { |
| if (success) { |
| res.json_value = parseInterfaceData(iface_id, eth_data, ipv4_data); |
| } else { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing object, and |
| // other errors |
| messages::addMessageToErrorJson( |
| res.json_value, |
| messages::resourceNotFound("EthernetInterface", iface_id)); |
| res.result(boost::beast::http::status::not_found); |
| } |
| res.end(); |
| }); |
| } |
| |
| void doPatch(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| // TODO(Pawel) this shall be parametrized call (two params) to get |
| // EthernetInterfaces for any Manager, not only hardcoded 'openbmc'. |
| // Check if there is required param, truly entering this shall be |
| // impossible. |
| if (params.size() != 1) { |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| return; |
| } |
| |
| const std::string &iface_id = params[0]; |
| |
| nlohmann::json patchReq; |
| |
| if (!json_util::processJsonFromRequest(res, req, patchReq)) { |
| return; |
| } |
| |
| // Get single eth interface data, and call the below callback for JSON |
| // preparation |
| ethernet_provider.getEthernetIfaceData( |
| iface_id, |
| [&, iface_id, patchReq = std::move(patchReq) ]( |
| const bool &success, const EthernetInterfaceData ð_data, |
| const std::vector<IPv4AddressData> &ipv4_data) { |
| if (!success) { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing object, and |
| // other errors |
| messages::addMessageToErrorJson( |
| res.json_value, |
| messages::resourceNotFound("VLAN Network Interface", iface_id)); |
| res.result(boost::beast::http::status::not_found); |
| res.end(); |
| |
| return; |
| } |
| |
| res.json_value = parseInterfaceData(iface_id, eth_data, ipv4_data); |
| |
| std::shared_ptr<AsyncResp> asyncResp = |
| std::make_shared<AsyncResp>(res); |
| |
| for (auto propertyIt = patchReq.begin(); propertyIt != patchReq.end(); |
| ++propertyIt) { |
| if (propertyIt.key() == "VLAN") { |
| handleVlanPatch(iface_id, propertyIt.value(), eth_data, "/VLAN", |
| asyncResp); |
| } else if (propertyIt.key() == "HostName") { |
| handleHostnamePatch(propertyIt.value(), eth_data, asyncResp); |
| } else if (propertyIt.key() == "IPv4Addresses") { |
| handleIPv4Patch(iface_id, propertyIt.value(), ipv4_data, |
| asyncResp); |
| } else if (propertyIt.key() == "IPv6Addresses") { |
| // TODO(kkowalsk) IPv6 Not supported on D-Bus yet |
| messages::addMessageToJsonRoot( |
| res.json_value, |
| messages::propertyNotWritable(propertyIt.key())); |
| } else { |
| auto fieldInJsonIt = res.json_value.find(propertyIt.key()); |
| |
| if (fieldInJsonIt == res.json_value.end()) { |
| // Field not in scope of defined fields |
| messages::addMessageToJsonRoot( |
| res.json_value, |
| messages::propertyUnknown(propertyIt.key())); |
| } else if (*fieldInJsonIt != *propertyIt) { |
| // User attempted to modify non-writable field |
| messages::addMessageToJsonRoot( |
| res.json_value, |
| messages::propertyNotWritable(propertyIt.key())); |
| } |
| } |
| } |
| }); |
| } |
| |
| // Ethernet Provider object |
| // TODO(Pawel) consider move it to singleton |
| OnDemandEthernetProvider ethernet_provider; |
| }; |
| |
| class VlanNetworkInterfaceCollection; |
| |
| /** |
| * VlanNetworkInterface derived class for delivering VLANNetworkInterface Schema |
| */ |
| class VlanNetworkInterface : public Node { |
| public: |
| /* |
| * Default Constructor |
| */ |
| template <typename CrowApp> |
| // TODO(Pawel) Remove line from below, where we assume that there is only one |
| // manager called openbmc This shall be generic, but requires to update |
| // GetSubroutes method |
| VlanNetworkInterface(CrowApp &app) |
| : Node( |
| app, |
| "/redfish/v1/Managers/openbmc/EthernetInterfaces/<str>/VLANs/<str>", |
| std::string(), std::string()) { |
| Node::json["@odata.type"] = |
| "#VLanNetworkInterface.v1_1_0.VLanNetworkInterface"; |
| Node::json["@odata.context"] = |
| "/redfish/v1/$metadata#VLanNetworkInterface.VLanNetworkInterface"; |
| Node::json["Name"] = "VLAN Network Interface"; |
| |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| private: |
| nlohmann::json parseInterfaceData( |
| const std::string &parent_iface_id, const std::string &iface_id, |
| const EthernetInterfaceData ð_data, |
| const std::vector<IPv4AddressData> &ipv4_data) { |
| // Copy JSON object to avoid race condition |
| nlohmann::json json_response(Node::json); |
| |
| if (eth_data.vlan_id == nullptr) { |
| // Interface not a VLAN - abort |
| messages::addMessageToErrorJson(json_response, messages::internalError()); |
| return json_response; |
| } |
| |
| // Fill out obvious data... |
| json_response["Id"] = iface_id; |
| json_response["@odata.id"] = |
| "/redfish/v1/Managers/openbmc/EthernetInterfaces/" + parent_iface_id + |
| "/VLANs/" + iface_id; |
| |
| json_response["VLANEnable"] = true; |
| json_response["VLANId"] = *eth_data.vlan_id; |
| |
| return json_response; |
| } |
| |
| bool verifyNames(crow::response &res, const std::string &parent, |
| const std::string &iface) { |
| if (!boost::starts_with(iface, parent + "_")) { |
| messages::addMessageToErrorJson( |
| res.json_value, |
| messages::resourceNotFound("VLAN Network Interface", iface)); |
| res.result(boost::beast::http::status::not_found); |
| res.end(); |
| |
| return false; |
| } else { |
| return true; |
| } |
| } |
| |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| // TODO(Pawel) this shall be parametrized call (two params) to get |
| // EthernetInterfaces for any Manager, not only hardcoded 'openbmc'. |
| // Check if there is required param, truly entering this shall be |
| // impossible. |
| if (params.size() != 2) { |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| return; |
| } |
| |
| const std::string &parent_iface_id = params[0]; |
| const std::string &iface_id = params[1]; |
| |
| // Get single eth interface data, and call the below callback for JSON |
| // preparation |
| ethernet_provider.getEthernetIfaceData( |
| iface_id, |
| [&, parent_iface_id, iface_id]( |
| const bool &success, const EthernetInterfaceData ð_data, |
| const std::vector<IPv4AddressData> &ipv4_data) { |
| if (success) { |
| res.json_value = parseInterfaceData(parent_iface_id, iface_id, |
| eth_data, ipv4_data); |
| } else { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing object, and |
| // other errors |
| messages::addMessageToErrorJson( |
| res.json_value, |
| messages::resourceNotFound("VLAN Network Interface", iface_id)); |
| res.result(boost::beast::http::status::not_found); |
| } |
| res.end(); |
| }); |
| } |
| |
| void doPatch(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| if (params.size() != 2) { |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| return; |
| } |
| |
| const std::string &parent_iface_id = params[0]; |
| const std::string &iface_id = params[1]; |
| |
| if (!verifyNames(res, parent_iface_id, iface_id)) { |
| return; |
| } |
| |
| nlohmann::json patchReq; |
| |
| if (!json_util::processJsonFromRequest(res, req, patchReq)) { |
| return; |
| } |
| |
| // Get single eth interface data, and call the below callback for JSON |
| // preparation |
| ethernet_provider.getEthernetIfaceData( |
| iface_id, |
| [&, parent_iface_id, iface_id, patchReq = std::move(patchReq) ]( |
| const bool &success, const EthernetInterfaceData ð_data, |
| const std::vector<IPv4AddressData> &ipv4_data) { |
| if (!success) { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing object, |
| // and |
| // other errors |
| messages::addMessageToErrorJson( |
| res.json_value, |
| messages::resourceNotFound("VLAN Network Interface", iface_id)); |
| res.result(boost::beast::http::status::not_found); |
| res.end(); |
| |
| return; |
| } |
| |
| res.json_value = parseInterfaceData(parent_iface_id, iface_id, |
| eth_data, ipv4_data); |
| |
| std::shared_ptr<AsyncResp> asyncResp = |
| std::make_shared<AsyncResp>(res); |
| |
| for (auto propertyIt = patchReq.begin(); propertyIt != patchReq.end(); |
| ++propertyIt) { |
| if (propertyIt.key() != "VLANEnable" && |
| propertyIt.key() != "VLANId") { |
| auto fieldInJsonIt = res.json_value.find(propertyIt.key()); |
| |
| if (fieldInJsonIt == res.json_value.end()) { |
| // Field not in scope of defined fields |
| messages::addMessageToJsonRoot( |
| res.json_value, |
| messages::propertyUnknown(propertyIt.key())); |
| } else if (*fieldInJsonIt != *propertyIt) { |
| // User attempted to modify non-writable field |
| messages::addMessageToJsonRoot( |
| res.json_value, |
| messages::propertyNotWritable(propertyIt.key())); |
| } |
| } |
| } |
| |
| EthernetInterface::handleVlanPatch(iface_id, patchReq, eth_data, "/", |
| asyncResp); |
| }); |
| } |
| |
| void doDelete(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| if (params.size() != 2) { |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| return; |
| } |
| |
| const std::string &parent_iface_id = params[0]; |
| const std::string &iface_id = params[1]; |
| |
| if (!verifyNames(res, parent_iface_id, iface_id)) { |
| return; |
| } |
| |
| // Get single eth interface data, and call the below callback for JSON |
| // preparation |
| ethernet_provider.getEthernetIfaceData( |
| iface_id, |
| [&, parent_iface_id, iface_id]( |
| const bool &success, const EthernetInterfaceData ð_data, |
| const std::vector<IPv4AddressData> &ipv4_data) { |
| if (success && eth_data.vlan_id != nullptr) { |
| res.json_value = parseInterfaceData(parent_iface_id, iface_id, |
| eth_data, ipv4_data); |
| |
| // Disable VLAN |
| OnDemandEthernetProvider::disableVlan( |
| iface_id, [&](const boost::system::error_code ec) { |
| if (ec) { |
| res.json_value = nlohmann::json::object(); |
| messages::addMessageToErrorJson(res.json_value, |
| messages::internalError()); |
| res.result( |
| boost::beast::http::status::internal_server_error); |
| } |
| res.end(); |
| }); |
| } else { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing object, |
| // and |
| // other errors |
| messages::addMessageToErrorJson( |
| res.json_value, |
| messages::resourceNotFound("VLAN Network Interface", iface_id)); |
| res.result(boost::beast::http::status::not_found); |
| res.end(); |
| } |
| }); |
| } |
| |
| /** |
| * This allows VlanNetworkInterfaceCollection to reuse this class' doGet |
| * method, to maintain consistency of returned data, as Collection's doPost |
| * should return data for created member which should match member's doGet |
| * result in 100%. |
| */ |
| friend VlanNetworkInterfaceCollection; |
| |
| // Ethernet Provider object |
| // TODO(Pawel) consider move it to singleton |
| OnDemandEthernetProvider ethernet_provider; |
| }; |
| |
| /** |
| * VlanNetworkInterfaceCollection derived class for delivering |
| * VLANNetworkInterface Collection Schema |
| */ |
| class VlanNetworkInterfaceCollection : public Node { |
| public: |
| template <typename CrowApp> |
| // TODO(Pawel) Remove line from below, where we assume that there is only one |
| // manager called openbmc This shall be generic, but requires to update |
| // GetSubroutes method |
| VlanNetworkInterfaceCollection(CrowApp &app) |
| : Node(app, |
| "/redfish/v1/Managers/openbmc/EthernetInterfaces/<str>/VLANs/", |
| std::string()), |
| memberVlan(app) { |
| Node::json["@odata.type"] = |
| "#VLanNetworkInterfaceCollection.VLanNetworkInterfaceCollection"; |
| Node::json["@odata.context"] = |
| "/redfish/v1/$metadata" |
| "#VLanNetworkInterfaceCollection.VLanNetworkInterfaceCollection"; |
| Node::json["Name"] = "VLAN Network Interface Collection"; |
| |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| private: |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| if (params.size() != 1) { |
| // This means there is a problem with the router |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| |
| return; |
| } |
| |
| // TODO(Pawel) this shall be parametrized call to get EthernetInterfaces for |
| // any Manager, not only hardcoded 'openbmc'. |
| std::string manager_id = "openbmc"; |
| std::string rootInterfaceName = params[0]; |
| |
| // Get eth interface list, and call the below callback for JSON preparation |
| ethernet_provider.getEthernetIfaceList([ |
| &, manager_id{std::move(manager_id)}, |
| rootInterfaceName{std::move(rootInterfaceName)} |
| ](const bool &success, const std::vector<std::string> &iface_list) { |
| if (success) { |
| bool rootInterfaceFound = false; |
| nlohmann::json iface_array = nlohmann::json::array(); |
| |
| for (const std::string &iface_item : iface_list) { |
| if (iface_item == rootInterfaceName) { |
| rootInterfaceFound = true; |
| } else if (boost::starts_with(iface_item, rootInterfaceName + "_")) { |
| iface_array.push_back( |
| {{"@odata.id", "/redfish/v1/Managers/" + manager_id + |
| "/EthernetInterfaces/" + rootInterfaceName + |
| "/VLANs/" + iface_item}}); |
| } |
| } |
| |
| if (rootInterfaceFound) { |
| Node::json["Members"] = iface_array; |
| Node::json["Members@odata.count"] = iface_array.size(); |
| Node::json["@odata.id"] = "/redfish/v1/Managers/" + manager_id + |
| "/EthernetInterfaces/" + rootInterfaceName + |
| "/VLANs"; |
| res.json_value = Node::json; |
| } else { |
| messages::addMessageToErrorJson( |
| res.json_value, messages::resourceNotFound("EthernetInterface", |
| rootInterfaceName)); |
| res.result(boost::beast::http::status::not_found); |
| res.end(); |
| } |
| } else { |
| // No success, best what we can do is return INTERNALL ERROR |
| res.result(boost::beast::http::status::internal_server_error); |
| } |
| res.end(); |
| }); |
| } |
| |
| void doPost(crow::response &res, const crow::request &req, |
| const std::vector<std::string> ¶ms) override { |
| if (params.size() != 1) { |
| // This means there is a problem with the router |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| return; |
| } |
| |
| nlohmann::json postReq; |
| |
| if (!json_util::processJsonFromRequest(res, req, postReq)) { |
| return; |
| } |
| |
| // TODO(Pawel) this shall be parametrized call to get EthernetInterfaces for |
| // any Manager, not only hardcoded 'openbmc'. |
| std::string manager_id = "openbmc"; |
| std::string rootInterfaceName = params[0]; |
| uint64_t vlanId; |
| bool errorDetected; |
| |
| if (json_util::getUnsigned( |
| "VLANId", postReq, vlanId, |
| static_cast<uint8_t>(json_util::MessageSetting::MISSING) | |
| static_cast<uint8_t>(json_util::MessageSetting::TYPE_ERROR), |
| res.json_value, "/VLANId") != json_util::Result::SUCCESS) { |
| res.end(); |
| return; |
| } |
| |
| // Get eth interface list, and call the below callback for JSON preparation |
| ethernet_provider.getEthernetIfaceList([ |
| &, manager_id{std::move(manager_id)}, |
| rootInterfaceName{std::move(rootInterfaceName)} |
| ](const bool &success, const std::vector<std::string> &iface_list) { |
| if (success) { |
| bool rootInterfaceFound = false; |
| |
| for (const std::string &iface_item : iface_list) { |
| if (iface_item == rootInterfaceName) { |
| rootInterfaceFound = true; |
| break; |
| } |
| } |
| |
| if (rootInterfaceFound) { |
| ethernet_provider.createVlan( |
| rootInterfaceName, vlanId, |
| [&, vlanId, rootInterfaceName, |
| req{std::move(req)} ](const boost::system::error_code ec) { |
| if (ec) { |
| messages::addMessageToErrorJson(res.json_value, |
| messages::internalError()); |
| res.end(); |
| } else { |
| memberVlan.doGet( |
| res, req, |
| {rootInterfaceName, |
| rootInterfaceName + "_" + std::to_string(vlanId)}); |
| } |
| }); |
| } else { |
| messages::addMessageToErrorJson( |
| res.json_value, messages::resourceNotFound("EthernetInterface", |
| rootInterfaceName)); |
| res.result(boost::beast::http::status::not_found); |
| res.end(); |
| } |
| } else { |
| // No success, best what we can do is return INTERNALL ERROR |
| res.result(boost::beast::http::status::internal_server_error); |
| res.end(); |
| } |
| }); |
| } |
| |
| // Ethernet Provider object |
| // TODO(Pawel) consider move it to singleton |
| OnDemandEthernetProvider ethernet_provider; |
| VlanNetworkInterface memberVlan; |
| }; |
| |
| } // namespace redfish |