| cmake_minimum_required (VERSION 3.5 FATAL_ERROR) |
| |
| cmake_policy (SET CMP0054 NEW) |
| |
| set (CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/cmake ${CMAKE_MODULE_PATH}) |
| |
| option (BUILD_STATIC_LIBS "Built static libraries" ON) |
| option (YOCTO_DEPENDENCIES "Use YOCTO depedencies system" OFF) |
| |
| option (BMCWEB_ENABLE_KVM "Enable KVM websocket interfaces" ON) |
| option (BMCWEB_ENABLE_DBUS_REST "Enable rest dbus interfaces" ON) |
| option (BMCWEB_ENABLE_REDFISH "Enable redfish interfaces" ON) |
| option (BMCWEB_ENABLE_HOST_SERIAL_WEBSOCKET "Enable host serial websocket" ON) |
| option (BMCWEB_ENABLE_STATIC_HOSTING "Enable hosting of static files. |
| For example, redfish schema and webui files" ON) |
| |
| option ( |
| BMCWEB_ENABLE_REDFISH_RAW_PECI "Enable PECI transactions through redfish" |
| OFF |
| ) |
| option ( |
| BMCWEB_ENABLE_REDFISH_CPU_LOG |
| "Enable CPU log service transactions through redfish" OFF |
| ) |
| |
| # Insecure options. Every option that starts with a BMCWEB_INSECURE flag should |
| # not be enabled by default for any platform, unless the author fully |
| # comprehends the implications of doing so. In general, enabling these options |
| # will cause security problems of varying degrees |
| option (BMCWEB_INSECURE_DISABLE_CSRF_PREVENTION "Disable CSRF prevention checks. |
| Should be set to OFF for production systems." OFF) |
| |
| option (BMCWEB_INSECURE_DISABLE_SSL "Disable SSL ports. Should be set to OFF for |
| production systems." OFF) |
| |
| option (BMCWEB_INSECURE_DISABLE_AUTHENTICATION "Disable authentication on all |
| ports. Should be set to OFF for production systems" OFF) |
| |
| option (BMCWEB_INSECURE_DISABLE_XSS_PREVENTION "Disable XSS preventions" OFF) |
| |
| project (bmc-webserver CXX) |
| |
| include (CTest) |
| |
| set (CMAKE_CXX_STANDARD 17) |
| set (CMAKE_CXX_STANDARD_REQUIRED ON) |
| |
| set (CMAKE_EXPORT_COMPILE_COMMANDS ON) |
| |
| set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS} -Wall") |
| |
| set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-rtti") |
| set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fno-rtti") |
| |
| # general |
| option (BMCWEB_BUILD_UT "Enable Unit test" OFF) |
| |
| # security flags |
| set (SECURITY_FLAGS "\ |
| -fstack-protector-strong \ |
| -fPIE \ |
| -fPIC \ |
| -D_FORTIFY_SOURCE=2 \ |
| -Wformat \ |
| -Wformat-security") |
| set (CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} ${SECURITY_FLAGS}") |
| set ( |
| CMAKE_CXX_FLAGS_RELWITHDEBINFO |
| "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} ${SECURITY_FLAGS}" |
| ) |
| set (CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL} ${SECURITY_FLAGS}") |
| |
| # Enable link time optimization This is a temporary workaround because |
| # INTERPROCEDURAL_OPTIMIZATION isn't available until cmake 3.9. gcc-ar and gcc- |
| # ranlib are wrappers around ar and ranlib which add the lto plugin to the |
| # command line. |
| if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU") |
| if (NOT CMAKE_BUILD_TYPE MATCHES Debug) |
| string (REGEX REPLACE "ar$" "gcc-ar" CMAKE_AR ${CMAKE_AR}) |
| string ( |
| REGEX |
| REPLACE "ranlib$" "gcc-ranlib" CMAKE_RANLIB ${CMAKE_RANLIB} |
| ) |
| set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -flto -fno-fat-lto-objects") |
| |
| # Reduce the binary size by removing unnecessary dynamic symbol table |
| # entries |
| set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} \ |
| -fvisibility=hidden \ |
| -fvisibility-inlines-hidden \ |
| -Wl,--exclude-libs,ALL") |
| endif (NOT CMAKE_BUILD_TYPE MATCHES Debug) |
| endif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU") |
| |
| if (NOT ${YOCTO_DEPENDENCIES}) # Download and unpack googletest at configure |
| # time |
| configure_file (CMakeLists.txt.in 3rdparty/CMakeLists.txt) |
| execute_process ( |
| COMMAND ${CMAKE_COMMAND} -G "${CMAKE_GENERATOR}" . |
| WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/3rdparty |
| ) |
| execute_process ( |
| COMMAND ${CMAKE_COMMAND} --build . |
| WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/3rdparty |
| ) |
| |
| set (CMAKE_PREFIX_PATH ${CMAKE_BINARY_DIR}/prefix ${CMAKE_PREFIX_PATH}) |
| endif () |
| |
| # add_definitions(-DBOOST_ASIO_ENABLE_HANDLER_TRACKING) |
| add_definitions (-DBOOST_ASIO_DISABLE_THREADS) |
| add_definitions (-DBOOST_ERROR_CODE_HEADER_ONLY) |
| add_definitions (-DBOOST_SYSTEM_NO_DEPRECATED) |
| add_definitions (-DBOOST_ALL_NO_LIB) |
| add_definitions (-DBOOST_NO_RTTI) |
| add_definitions (-DBOOST_NO_TYPEID) |
| add_definitions (-DBOOST_COROUTINES_NO_DEPRECATION_WARNING) |
| |
| find_package (Boost 1.66 REQUIRED) |
| include_directories (${BOOST_SRC_DIR}) |
| |
| # sdbusplus |
| if (NOT ${YOCTO_DEPENDENCIES}) |
| include_directories (${CMAKE_BINARY_DIR}/sdbusplus-src) |
| link_directories (${CMAKE_BINARY_DIR}/sdbusplus-src/.libs) |
| endif () |
| |
| # Openssl |
| find_package (OpenSSL REQUIRED) |
| include_directories (${OPENSSL_INCLUDE_DIR}) |
| message ("OPENSSL_INCLUDE_DIR ${OPENSSL_INCLUDE_DIR}") |
| |
| # bmcweb |
| message ("CMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE}") |
| if (CMAKE_BUILD_TYPE MATCHES Debug) |
| message ("Logging disabled") |
| add_definitions (-DBMCWEB_ENABLE_LOGGING) |
| add_definitions (-DBMCWEB_ENABLE_DEBUG) |
| endif (CMAKE_BUILD_TYPE MATCHES Debug) |
| |
| if (NOT "${BMCWEB_INSECURE_DISABLE_SSL}") |
| add_definitions (-DBMCWEB_ENABLE_SSL) |
| endif (NOT "${BMCWEB_INSECURE_DISABLE_SSL}") |
| include_directories (${CMAKE_CURRENT_SOURCE_DIR}/crow/include) |
| |
| # Zlib |
| find_package (ZLIB REQUIRED) |
| include_directories (${ZLIB_INCLUDE_DIRS}) |
| |
| # PAM |
| option (WEBSERVER_ENABLE_PAM "enable pam authentication" ON) |
| if ("${WEBSERVER_ENABLE_PAM}") |
| find_package (PAM REQUIRED) |
| else () |
| add_definitions ("-DWEBSERVER_DISABLE_PAM") |
| endif () |
| |
| add_definitions ("-Wno-attributes") |
| # Copy pam-webserver to etc/pam.d |
| install ( |
| FILES ${CMAKE_CURRENT_SOURCE_DIR}/pam-webserver |
| DESTINATION /etc/pam.d/ |
| RENAME webserver |
| ) |
| |
| # tinyxml2 |
| find_package (tinyxml2 REQUIRED) |
| |
| set (WEBSERVER_MAIN src/webserver_main.cpp) |
| |
| include_directories (${CMAKE_CURRENT_SOURCE_DIR}/include) |
| include_directories (${CMAKE_CURRENT_SOURCE_DIR}/redfish-core/include) |
| |
| file (MAKE_DIRECTORY ${CMAKE_BINARY_DIR}/include/bmcweb) |
| configure_file (settings.hpp.in ${CMAKE_BINARY_DIR}/include/bmcweb/settings.hpp) |
| include_directories (${CMAKE_BINARY_DIR}/include) |
| |
| set ( |
| SRC_FILES redfish-core/src/error_messages.cpp |
| redfish-core/src/utils/json_utils.cpp ${GENERATED_SRC_FILES} |
| ) |
| |
| file (COPY src/test_resources DESTINATION ${CMAKE_CURRENT_BINARY_DIR}) |
| |
| # Unit Tests |
| if (${BMCWEB_BUILD_UT}) |
| set ( |
| UT_FILES src/crow_test.cpp src/gtest_main.cpp |
| src/token_authorization_middleware_test.cpp |
| src/security_headers_middleware_test.cpp src/webassets_test.cpp |
| src/crow_getroutes_test.cpp src/ast_jpeg_decoder_test.cpp |
| src/kvm_websocket_test.cpp src/msan_test.cpp |
| src/ast_video_puller_test.cpp src/openbmc_jtag_rest_test.cpp |
| redfish-core/ut/privileges_test.cpp |
| ${CMAKE_BINARY_DIR}/include/bmcweb/blns.hpp |
| ) # big list of naughty strings |
| add_custom_command ( |
| OUTPUT ${CMAKE_BINARY_DIR}/include/bmcweb/blns.hpp |
| COMMAND |
| xxd -i ${CMAKE_CURRENT_SOURCE_DIR}/src/test_resources/blns |
| ${CMAKE_BINARY_DIR}/include/bmcweb/blns.hpp |
| ) |
| |
| set_source_files_properties ( |
| ${CMAKE_BINARY_DIR}/include/bmcweb/blns.hpp PROPERTIES GENERATED TRUE |
| ) |
| enable_testing () |
| |
| add_executable (webtest ${SRC_FILES} ${UT_FILES}) |
| |
| find_package (GTest REQUIRED) |
| find_package (GMock REQUIRED) |
| target_link_libraries (webtest ${GTEST_LIBRARIES}) |
| target_link_libraries (webtest ${GMOCK_LIBRARIES}) |
| |
| target_link_libraries (webtest pthread) |
| target_link_libraries (webtest ${OPENSSL_LIBRARIES}) |
| target_link_libraries (webtest ${ZLIB_LIBRARIES}) |
| target_link_libraries (webtest pam) |
| target_link_libraries (webtest tinyxml2) |
| target_link_libraries (webtest sdbusplus) |
| target_link_libraries (webtest -lsystemd) |
| target_link_libraries (webtest -lstdc++fs) |
| add_test (webtest webtest "--gtest_output=xml:webtest.xml") |
| |
| endif (${BMCWEB_BUILD_UT}) |
| |
| install (DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/static/ DESTINATION share/www) |
| |
| # bmcweb |
| add_executable (bmcweb ${WEBSERVER_MAIN} ${HDR_FILES} ${SRC_FILES}) |
| target_link_libraries (bmcweb ${OPENSSL_LIBRARIES}) |
| target_link_libraries (bmcweb ${ZLIB_LIBRARIES}) |
| target_link_libraries (bmcweb pam) |
| target_link_libraries (bmcweb -lsystemd) |
| target_link_libraries (bmcweb -lstdc++fs) |
| target_link_libraries (bmcweb sdbusplus) |
| target_link_libraries (bmcweb tinyxml2) |
| install (TARGETS bmcweb DESTINATION bin) |
| |
| add_executable (getvideo src/getvideo_main.cpp) |
| target_link_libraries (getvideo pthread) |