Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / bmcweb / 4e7776689b7d66cfb3c199985c9e70fea7be77c2 / . / redfish-core / lib / sensors.hpp
blob: aa48e0d735c25d62c04f6a280fde7dec776054f7 [file] [log] [blame]
/*
// Copyright (c) 2018 Intel Corporation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
*/
#pragma once
#include <app.hpp>
#include <boost/algorithm/string/classification.hpp>
#include <boost/algorithm/string/split.hpp>
#include <boost/range/algorithm/replace_copy_if.hpp>
#include <dbus_singleton.hpp>
#include <dbus_utility.hpp>
#include <query.hpp>
#include <registries/privilege_registry.hpp>
#include <sdbusplus/asio/property.hpp>
#include <utils/json_utils.hpp>
#include <utils/query_param.hpp>
#include <cmath>
#include <iterator>
#include <map>
#include <set>
#include <utility>
#include <variant>
namespace redfish
{
namespace sensors
{
namespace node
{
static constexpr std::string_view power = "Power";
static constexpr std::string_view sensors = "Sensors";
static constexpr std::string_view thermal = "Thermal";
} // namespace node
// clang-format off
namespace dbus
{
static auto powerPaths = std::to_array<std::string_view>({
"/xyz/openbmc_project/sensors/voltage",
"/xyz/openbmc_project/sensors/power"
});
static auto sensorPaths = std::to_array<std::string_view>({
"/xyz/openbmc_project/sensors/power",
"/xyz/openbmc_project/sensors/current",
"/xyz/openbmc_project/sensors/airflow",
"/xyz/openbmc_project/sensors/humidity",
#ifdef BMCWEB_NEW_POWERSUBSYSTEM_THERMALSUBSYSTEM
"/xyz/openbmc_project/sensors/voltage",
"/xyz/openbmc_project/sensors/fan_tach",
"/xyz/openbmc_project/sensors/temperature",
"/xyz/openbmc_project/sensors/fan_pwm",
"/xyz/openbmc_project/sensors/altitude",
"/xyz/openbmc_project/sensors/energy",
#endif
"/xyz/openbmc_project/sensors/utilization"
});
static auto thermalPaths = std::to_array<std::string_view>({
"/xyz/openbmc_project/sensors/fan_tach",
"/xyz/openbmc_project/sensors/temperature",
"/xyz/openbmc_project/sensors/fan_pwm"
});
} // namespace dbus
// clang-format on
using sensorPair = std::pair<std::string_view, std::span<std::string_view>>;
static constexpr std::array<sensorPair, 3> paths = {
{{node::power, std::span<std::string_view>(dbus::powerPaths)},
{node::sensors, std::span<std::string_view>(dbus::sensorPaths)},
{node::thermal, std::span<std::string_view>(dbus::thermalPaths)}}};
inline const char* toReadingType(const std::string& sensorType)
{
if (sensorType == "voltage")
{
return "Voltage";
}
if (sensorType == "power")
{
return "Power";
}
if (sensorType == "current")
{
return "Current";
}
if (sensorType == "fan_tach")
{
return "Rotational";
}
if (sensorType == "temperature")
{
return "Temperature";
}
if (sensorType == "fan_pwm" || sensorType == "utilization")
{
return "Percent";
}
if (sensorType == "humidity")
{
return "Humidity";
}
if (sensorType == "altitude")
{
return "Altitude";
}
if (sensorType == "airflow")
{
return "AirFlow";
}
if (sensorType == "energy")
{
return "EnergyJoules";
}
return "";
}
inline const char* toReadingUnits(const std::string& sensorType)
{
if (sensorType == "voltage")
{
return "V";
}
if (sensorType == "power")
{
return "W";
}
if (sensorType == "current")
{
return "A";
}
if (sensorType == "fan_tach")
{
return "RPM";
}
if (sensorType == "temperature")
{
return "Cel";
}
if (sensorType == "fan_pwm" || sensorType == "utilization" ||
sensorType == "humidity")
{
return "%";
}
if (sensorType == "altitude")
{
return "m";
}
if (sensorType == "airflow")
{
return "cft_i/min";
}
if (sensorType == "energy")
{
return "J";
}
return "";
}
} // namespace sensors
/**
* SensorsAsyncResp
* Gathers data needed for response processing after async calls are done
*/
class SensorsAsyncResp
{
public:
using DataCompleteCb = std::function<void(
const boost::beast::http::status status,
const std::map<std::string, std::string>& uriToDbus)>;
struct SensorData
{
const std::string name;
std::string uri;
const std::string valueKey;
const std::string dbusPath;
};
SensorsAsyncResp(const std::shared_ptr<bmcweb::AsyncResp>& asyncRespIn,
const std::string& chassisIdIn,
std::span<std::string_view> typesIn,
std::string_view subNode) :
asyncResp(asyncRespIn),
chassisId(chassisIdIn), types(typesIn), chassisSubNode(subNode),
efficientExpand(false)
{}
// Store extra data about sensor mapping and return it in callback
SensorsAsyncResp(const std::shared_ptr<bmcweb::AsyncResp>& asyncRespIn,
const std::string& chassisIdIn,
std::span<std::string_view> typesIn,
std::string_view subNode,
DataCompleteCb&& creationComplete) :
asyncResp(asyncRespIn),
chassisId(chassisIdIn), types(typesIn), chassisSubNode(subNode),
efficientExpand(false), metadata{std::vector<SensorData>()},
dataComplete{std::move(creationComplete)}
{}
// sensor collections expand
SensorsAsyncResp(const std::shared_ptr<bmcweb::AsyncResp>& asyncRespIn,
const std::string& chassisIdIn,
const std::span<std::string_view> typesIn,
const std::string_view& subNode, bool efficientExpandIn) :
asyncResp(asyncRespIn),
chassisId(chassisIdIn), types(typesIn), chassisSubNode(subNode),
efficientExpand(efficientExpandIn)
{}
~SensorsAsyncResp()
{
if (asyncResp->res.result() ==
boost::beast::http::status::internal_server_error)
{
// Reset the json object to clear out any data that made it in
// before the error happened todo(ed) handle error condition with
// proper code
asyncResp->res.jsonValue = nlohmann::json::object();
}
if (dataComplete && metadata)
{
std::map<std::string, std::string> map;
if (asyncResp->res.result() == boost::beast::http::status::ok)
{
for (auto& sensor : *metadata)
{
map.insert(std::make_pair(sensor.uri + sensor.valueKey,
sensor.dbusPath));
}
}
dataComplete(asyncResp->res.result(), map);
}
}
SensorsAsyncResp(const SensorsAsyncResp&) = delete;
SensorsAsyncResp(SensorsAsyncResp&&) = delete;
SensorsAsyncResp& operator=(const SensorsAsyncResp&) = delete;
SensorsAsyncResp& operator=(SensorsAsyncResp&&) = delete;
void addMetadata(const nlohmann::json& sensorObject,
const std::string& valueKey, const std::string& dbusPath)
{
if (metadata)
{
metadata->emplace_back(SensorData{sensorObject["Name"],
sensorObject["@odata.id"],
valueKey, dbusPath});
}
}
void updateUri(const std::string& name, const std::string& uri)
{
if (metadata)
{
for (auto& sensor : *metadata)
{
if (sensor.name == name)
{
sensor.uri = uri;
}
}
}
}
const std::shared_ptr<bmcweb::AsyncResp> asyncResp;
const std::string chassisId;
const std::span<std::string_view> types;
const std::string chassisSubNode;
const bool efficientExpand;
private:
std::optional<std::vector<SensorData>> metadata;
DataCompleteCb dataComplete;
};
/**
* Possible states for physical inventory leds
*/
enum class LedState
{
OFF,
ON,
BLINK,
UNKNOWN
};
/**
* D-Bus inventory item associated with one or more sensors.
*/
class InventoryItem
{
public:
explicit InventoryItem(const std::string& objPath) : objectPath(objPath)
{
// Set inventory item name to last node of object path
sdbusplus::message::object_path path(objectPath);
name = path.filename();
if (name.empty())
{
BMCWEB_LOG_ERROR << "Failed to find '/' in " << objectPath;
}
}
std::string objectPath;
std::string name;
bool isPresent = true;
bool isFunctional = true;
bool isPowerSupply = false;
int powerSupplyEfficiencyPercent = -1;
std::string manufacturer;
std::string model;
std::string partNumber;
std::string serialNumber;
std::set<std::string> sensors;
std::string ledObjectPath;
LedState ledState = LedState::UNKNOWN;
};
/**
* @brief Get objects with connection necessary for sensors
* @param SensorsAsyncResp Pointer to object holding response data
* @param sensorNames Sensors retrieved from chassis
* @param callback Callback for processing gathered connections
*/
template <typename Callback>
void getObjectsWithConnection(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
const std::shared_ptr<std::set<std::string>>& sensorNames,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getObjectsWithConnection enter";
const std::string path = "/xyz/openbmc_project/sensors";
const std::array<std::string, 1> interfaces = {
"xyz.openbmc_project.Sensor.Value"};
// Response handler for parsing objects subtree
auto respHandler =
[callback{std::forward<Callback>(callback)}, sensorsAsyncResp,
sensorNames](const boost::system::error_code ec,
const dbus::utility::MapperGetSubTreeResponse& subtree) {
BMCWEB_LOG_DEBUG << "getObjectsWithConnection resp_handler enter";
if (ec)
{
messages::internalError(sensorsAsyncResp->asyncResp->res);
BMCWEB_LOG_ERROR
<< "getObjectsWithConnection resp_handler: Dbus error " << ec;
return;
}
BMCWEB_LOG_DEBUG << "Found " << subtree.size() << " subtrees";
// Make unique list of connections only for requested sensor types and
// found in the chassis
std::set<std::string> connections;
std::set<std::pair<std::string, std::string>> objectsWithConnection;
BMCWEB_LOG_DEBUG << "sensorNames list count: " << sensorNames->size();
for (const std::string& tsensor : *sensorNames)
{
BMCWEB_LOG_DEBUG << "Sensor to find: " << tsensor;
}
for (const std::pair<
std::string,
std::vector<std::pair<std::string, std::vector<std::string>>>>&
object : subtree)
{
if (sensorNames->find(object.first) != sensorNames->end())
{
for (const std::pair<std::string, std::vector<std::string>>&
objData : object.second)
{
BMCWEB_LOG_DEBUG << "Adding connection: " << objData.first;
connections.insert(objData.first);
objectsWithConnection.insert(
std::make_pair(object.first, objData.first));
}
}
}
BMCWEB_LOG_DEBUG << "Found " << connections.size() << " connections";
callback(std::move(connections), std::move(objectsWithConnection));
BMCWEB_LOG_DEBUG << "getObjectsWithConnection resp_handler exit";
};
// Make call to ObjectMapper to find all sensors objects
crow::connections::systemBus->async_method_call(
std::move(respHandler), "xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTree", path, 2, interfaces);
BMCWEB_LOG_DEBUG << "getObjectsWithConnection exit";
}
/**
* @brief Create connections necessary for sensors
* @param SensorsAsyncResp Pointer to object holding response data
* @param sensorNames Sensors retrieved from chassis
* @param callback Callback for processing gathered connections
*/
template <typename Callback>
void getConnections(std::shared_ptr<SensorsAsyncResp> sensorsAsyncResp,
const std::shared_ptr<std::set<std::string>> sensorNames,
Callback&& callback)
{
auto objectsWithConnectionCb =
[callback](const std::set<std::string>& connections,
const std::set<std::pair<std::string, std::string>>&
/*objectsWithConnection*/) { callback(connections); };
getObjectsWithConnection(sensorsAsyncResp, sensorNames,
std::move(objectsWithConnectionCb));
}
/**
* @brief Shrinks the list of sensors for processing
* @param SensorsAysncResp The class holding the Redfish response
* @param allSensors A list of all the sensors associated to the
* chassis element (i.e. baseboard, front panel, etc...)
* @param activeSensors A list that is a reduction of the incoming
* allSensors list. Eliminate Thermal sensors when a Power request is
* made, and eliminate Power sensors when a Thermal request is made.
*/
inline void reduceSensorList(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
const std::vector<std::string>* allSensors,
const std::shared_ptr<std::set<std::string>>& activeSensors)
{
if (sensorsAsyncResp == nullptr)
{
return;
}
if ((allSensors == nullptr) || (activeSensors == nullptr))
{
messages::resourceNotFound(
sensorsAsyncResp->asyncResp->res, sensorsAsyncResp->chassisSubNode,
sensorsAsyncResp->chassisSubNode == sensors::node::thermal
? "Temperatures"
: "Voltages");
return;
}
if (allSensors->empty())
{
// Nothing to do, the activeSensors object is also empty
return;
}
for (std::string_view type : sensorsAsyncResp->types)
{
for (const std::string& sensor : *allSensors)
{
if (sensor.starts_with(type))
{
activeSensors->emplace(sensor);
}
}
}
}
/**
* @brief Retrieves requested chassis sensors and redundancy data from DBus .
* @param SensorsAsyncResp Pointer to object holding response data
* @param callback Callback for next step in gathered sensor processing
*/
template <typename Callback>
void getChassis(const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getChassis enter";
const std::array<const char*, 2> interfaces = {
"xyz.openbmc_project.Inventory.Item.Board",
"xyz.openbmc_project.Inventory.Item.Chassis"};
auto respHandler =
[callback{std::forward<Callback>(callback)}, sensorsAsyncResp](
const boost::system::error_code ec,
const dbus::utility::MapperGetSubTreePathsResponse& chassisPaths) {
BMCWEB_LOG_DEBUG << "getChassis respHandler enter";
if (ec)
{
BMCWEB_LOG_ERROR << "getChassis respHandler DBUS error: " << ec;
messages::internalError(sensorsAsyncResp->asyncResp->res);
return;
}
const std::string* chassisPath = nullptr;
std::string chassisName;
for (const std::string& chassis : chassisPaths)
{
sdbusplus::message::object_path path(chassis);
chassisName = path.filename();
if (chassisName.empty())
{
BMCWEB_LOG_ERROR << "Failed to find '/' in " << chassis;
continue;
}
if (chassisName == sensorsAsyncResp->chassisId)
{
chassisPath = &chassis;
break;
}
}
if (chassisPath == nullptr)
{
messages::resourceNotFound(sensorsAsyncResp->asyncResp->res,
"Chassis", sensorsAsyncResp->chassisId);
return;
}
const std::string& chassisSubNode = sensorsAsyncResp->chassisSubNode;
if (chassisSubNode == sensors::node::power)
{
sensorsAsyncResp->asyncResp->res.jsonValue["@odata.type"] =
"#Power.v1_5_2.Power";
}
else if (chassisSubNode == sensors::node::thermal)
{
sensorsAsyncResp->asyncResp->res.jsonValue["@odata.type"] =
"#Thermal.v1_4_0.Thermal";
sensorsAsyncResp->asyncResp->res.jsonValue["Fans"] =
nlohmann::json::array();
sensorsAsyncResp->asyncResp->res.jsonValue["Temperatures"] =
nlohmann::json::array();
}
else if (chassisSubNode == sensors::node::sensors)
{
sensorsAsyncResp->asyncResp->res.jsonValue["@odata.type"] =
"#SensorCollection.SensorCollection";
sensorsAsyncResp->asyncResp->res.jsonValue["Description"] =
"Collection of Sensors for this Chassis";
sensorsAsyncResp->asyncResp->res.jsonValue["Members"] =
nlohmann::json::array();
sensorsAsyncResp->asyncResp->res.jsonValue["Members@odata.count"] =
0;
}
if (chassisSubNode != sensors::node::sensors)
{
sensorsAsyncResp->asyncResp->res.jsonValue["Id"] = chassisSubNode;
}
sensorsAsyncResp->asyncResp->res.jsonValue["@odata.id"] =
"/redfish/v1/Chassis/" + sensorsAsyncResp->chassisId + "/" +
chassisSubNode;
sensorsAsyncResp->asyncResp->res.jsonValue["Name"] = chassisSubNode;
// Get the list of all sensors for this Chassis element
std::string sensorPath = *chassisPath + "/all_sensors";
sdbusplus::asio::getProperty<std::vector<std::string>>(
*crow::connections::systemBus, "xyz.openbmc_project.ObjectMapper",
sensorPath, "xyz.openbmc_project.Association", "endpoints",
[sensorsAsyncResp,
callback{std::forward<const Callback>(callback)}](
const boost::system::error_code& e,
const std::vector<std::string>& nodeSensorList) {
if (e)
{
if (e.value() != EBADR)
{
messages::internalError(sensorsAsyncResp->asyncResp->res);
return;
}
}
const std::shared_ptr<std::set<std::string>> culledSensorList =
std::make_shared<std::set<std::string>>();
reduceSensorList(sensorsAsyncResp, &nodeSensorList,
culledSensorList);
callback(culledSensorList);
});
};
// Get the Chassis Collection
crow::connections::systemBus->async_method_call(
respHandler, "xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTreePaths",
"/xyz/openbmc_project/inventory", 0, interfaces);
BMCWEB_LOG_DEBUG << "getChassis exit";
}
/**
* @brief Finds all DBus object paths that implement ObjectManager.
*
* Creates a mapping from the associated connection name to the object path.
*
* Finds the object paths asynchronously. Invokes callback when information has
* been obtained.
*
* The callback must have the following signature:
* @code
* callback(std::shared_ptr<std::map<std::string,std::string>> objectMgrPaths)
* @endcode
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param callback Callback to invoke when object paths obtained.
*/
template <typename Callback>
void getObjectManagerPaths(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getObjectManagerPaths enter";
const std::array<std::string, 1> interfaces = {
"org.freedesktop.DBus.ObjectManager"};
// Response handler for GetSubTree DBus method
auto respHandler =
[callback{std::forward<Callback>(callback)}, sensorsAsyncResp](
const boost::system::error_code ec,
const dbus::utility::MapperGetSubTreeResponse& subtree) {
BMCWEB_LOG_DEBUG << "getObjectManagerPaths respHandler enter";
if (ec)
{
messages::internalError(sensorsAsyncResp->asyncResp->res);
BMCWEB_LOG_ERROR << "getObjectManagerPaths respHandler: DBus error "
<< ec;
return;
}
// Loop over returned object paths
std::shared_ptr<std::map<std::string, std::string>> objectMgrPaths =
std::make_shared<std::map<std::string, std::string>>();
for (const std::pair<
std::string,
std::vector<std::pair<std::string, std::vector<std::string>>>>&
object : subtree)
{
// Loop over connections for current object path
const std::string& objectPath = object.first;
for (const std::pair<std::string, std::vector<std::string>>&
objData : object.second)
{
// Add mapping from connection to object path
const std::string& connection = objData.first;
(*objectMgrPaths)[connection] = objectPath;
BMCWEB_LOG_DEBUG << "Added mapping " << connection << " -> "
<< objectPath;
}
}
callback(objectMgrPaths);
BMCWEB_LOG_DEBUG << "getObjectManagerPaths respHandler exit";
};
// Query mapper for all DBus object paths that implement ObjectManager
crow::connections::systemBus->async_method_call(
std::move(respHandler), "xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTree", "/", 0, interfaces);
BMCWEB_LOG_DEBUG << "getObjectManagerPaths exit";
}
/**
* @brief Returns the Redfish State value for the specified inventory item.
* @param inventoryItem D-Bus inventory item associated with a sensor.
* @return State value for inventory item.
*/
inline std::string getState(const InventoryItem* inventoryItem)
{
if ((inventoryItem != nullptr) && !(inventoryItem->isPresent))
{
return "Absent";
}
return "Enabled";
}
/**
* @brief Returns the Redfish Health value for the specified sensor.
* @param sensorJson Sensor JSON object.
* @param interfacesDict Map of all sensor interfaces.
* @param inventoryItem D-Bus inventory item associated with the sensor. Will
* be nullptr if no associated inventory item was found.
* @return Health value for sensor.
*/
inline std::string
getHealth(nlohmann::json& sensorJson,
const dbus::utility::DBusInteracesMap& interfacesDict,
const InventoryItem* inventoryItem)
{
// Get current health value (if any) in the sensor JSON object. Some JSON
// objects contain multiple sensors (such as PowerSupplies). We want to set
// the overall health to be the most severe of any of the sensors.
std::string currentHealth;
auto statusIt = sensorJson.find("Status");
if (statusIt != sensorJson.end())
{
auto healthIt = statusIt->find("Health");
if (healthIt != statusIt->end())
{
std::string* health = healthIt->get_ptr<std::string*>();
if (health != nullptr)
{
currentHealth = *health;
}
}
}
// If current health in JSON object is already Critical, return that. This
// should override the sensor health, which might be less severe.
if (currentHealth == "Critical")
{
return "Critical";
}
// Check if sensor has critical threshold alarm
for (const auto& [interface, values] : interfacesDict)
{
if (interface == "xyz.openbmc_project.Sensor.Threshold.Critical")
{
for (const auto& [valueName, value] : values)
{
if (valueName == "CriticalAlarmHigh" ||
valueName == "CriticalAlarmLow")
{
const bool* asserted = std::get_if<bool>(&value);
if (asserted == nullptr)
{
BMCWEB_LOG_ERROR << "Illegal sensor threshold";
}
else if (*asserted)
{
return "Critical";
}
}
}
}
}
// Check if associated inventory item is not functional
if ((inventoryItem != nullptr) && !(inventoryItem->isFunctional))
{
return "Critical";
}
// If current health in JSON object is already Warning, return that. This
// should override the sensor status, which might be less severe.
if (currentHealth == "Warning")
{
return "Warning";
}
// Check if sensor has warning threshold alarm
for (const auto& [interface, values] : interfacesDict)
{
if (interface == "xyz.openbmc_project.Sensor.Threshold.Warning")
{
for (const auto& [valueName, value] : values)
{
if (valueName == "WarningAlarmHigh" ||
valueName == "WarningAlarmLow")
{
const bool* asserted = std::get_if<bool>(&value);
if (asserted == nullptr)
{
BMCWEB_LOG_ERROR << "Illegal sensor threshold";
}
else if (*asserted)
{
return "Warning";
}
}
}
}
}
return "OK";
}
inline void setLedState(nlohmann::json& sensorJson,
const InventoryItem* inventoryItem)
{
if (inventoryItem != nullptr && !inventoryItem->ledObjectPath.empty())
{
switch (inventoryItem->ledState)
{
case LedState::OFF:
sensorJson["IndicatorLED"] = "Off";
break;
case LedState::ON:
sensorJson["IndicatorLED"] = "Lit";
break;
case LedState::BLINK:
sensorJson["IndicatorLED"] = "Blinking";
break;
case LedState::UNKNOWN:
break;
}
}
}
/**
* @brief Builds a json sensor representation of a sensor.
* @param sensorName The name of the sensor to be built
* @param sensorType The type (temperature, fan_tach, etc) of the sensor to
* build
* @param sensorsAsyncResp Sensor metadata
* @param interfacesDict A dictionary of the interfaces and properties of said
* interfaces to be built from
* @param sensor_json The json object to fill
* @param inventoryItem D-Bus inventory item associated with the sensor. Will
* be nullptr if no associated inventory item was found.
*/
inline void objectInterfacesToJson(
const std::string& sensorName, const std::string& sensorType,
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
const dbus::utility::DBusInteracesMap& interfacesDict,
nlohmann::json& sensorJson, InventoryItem* inventoryItem)
{
// Assume values exist as is (10^0 == 1) if no scale exists
int64_t scaleMultiplier = 0;
for (const auto& [interface, values] : interfacesDict)
{
if (interface == "xyz.openbmc_project.Sensor.Value")
{
for (const auto& [valueName, value] : values)
{
if (valueName == "Scale")
{
const int64_t* int64Value = std::get_if<int64_t>(&value);
if (int64Value != nullptr)
{
scaleMultiplier = *int64Value;
}
}
}
}
}
if (sensorsAsyncResp->chassisSubNode == sensors::node::sensors)
{
// For sensors in SensorCollection we set Id instead of MemberId,
// including power sensors.
sensorJson["Id"] = sensorName;
sensorJson["Name"] = boost::replace_all_copy(sensorName, "_", " ");
}
else if (sensorType != "power")
{
// Set MemberId and Name for non-power sensors. For PowerSupplies and
// PowerControl, those properties have more general values because
// multiple sensors can be stored in the same JSON object.
sensorJson["MemberId"] = sensorName;
sensorJson["Name"] = boost::replace_all_copy(sensorName, "_", " ");
}
sensorJson["Status"]["State"] = getState(inventoryItem);
sensorJson["Status"]["Health"] =
getHealth(sensorJson, interfacesDict, inventoryItem);
// Parameter to set to override the type we get from dbus, and force it to
// int, regardless of what is available. This is used for schemas like fan,
// that require integers, not floats.
bool forceToInt = false;
nlohmann::json::json_pointer unit("/Reading");
if (sensorsAsyncResp->chassisSubNode == sensors::node::sensors)
{
sensorJson["@odata.type"] = "#Sensor.v1_2_0.Sensor";
const std::string& readingType = sensors::toReadingType(sensorType);
if (readingType.empty())
{
BMCWEB_LOG_ERROR << "Redfish cannot map reading type for "
<< sensorType;
}
else
{
sensorJson["ReadingType"] = readingType;
}
const std::string& readingUnits = sensors::toReadingUnits(sensorType);
if (readingUnits.empty())
{
BMCWEB_LOG_ERROR << "Redfish cannot map reading unit for "
<< sensorType;
}
else
{
sensorJson["ReadingUnits"] = readingUnits;
}
}
else if (sensorType == "temperature")
{
unit = "/ReadingCelsius"_json_pointer;
sensorJson["@odata.type"] = "#Thermal.v1_3_0.Temperature";
// TODO(ed) Documentation says that path should be type fan_tach,
// implementation seems to implement fan
}
else if (sensorType == "fan" || sensorType == "fan_tach")
{
unit = "/Reading"_json_pointer;
sensorJson["ReadingUnits"] = "RPM";
sensorJson["@odata.type"] = "#Thermal.v1_3_0.Fan";
setLedState(sensorJson, inventoryItem);
forceToInt = true;
}
else if (sensorType == "fan_pwm")
{
unit = "/Reading"_json_pointer;
sensorJson["ReadingUnits"] = "Percent";
sensorJson["@odata.type"] = "#Thermal.v1_3_0.Fan";
setLedState(sensorJson, inventoryItem);
forceToInt = true;
}
else if (sensorType == "voltage")
{
unit = "/ReadingVolts"_json_pointer;
sensorJson["@odata.type"] = "#Power.v1_0_0.Voltage";
}
else if (sensorType == "power")
{
std::string sensorNameLower =
boost::algorithm::to_lower_copy(sensorName);
if (sensorName == "total_power")
{
sensorJson["@odata.type"] = "#Power.v1_0_0.PowerControl";
// Put multiple "sensors" into a single PowerControl, so have
// generic names for MemberId and Name. Follows Redfish mockup.
sensorJson["MemberId"] = "0";
sensorJson["Name"] = "Chassis Power Control";
unit = "/PowerConsumedWatts"_json_pointer;
}
else if (sensorNameLower.find("input") != std::string::npos)
{
unit = "/PowerInputWatts"_json_pointer;
}
else
{
unit = "/PowerOutputWatts"_json_pointer;
}
}
else
{
BMCWEB_LOG_ERROR << "Redfish cannot map object type for " << sensorName;
return;
}
// Map of dbus interface name, dbus property name and redfish property_name
std::vector<
std::tuple<const char*, const char*, nlohmann::json::json_pointer>>
properties;
properties.reserve(7);
properties.emplace_back("xyz.openbmc_project.Sensor.Value", "Value", unit);
if (sensorsAsyncResp->chassisSubNode == sensors::node::sensors)
{
properties.emplace_back(
"xyz.openbmc_project.Sensor.Threshold.Warning", "WarningHigh",
"/Thresholds/UpperCaution/Reading"_json_pointer);
properties.emplace_back(
"xyz.openbmc_project.Sensor.Threshold.Warning", "WarningLow",
"/Thresholds/LowerCaution/Reading"_json_pointer);
properties.emplace_back(
"xyz.openbmc_project.Sensor.Threshold.Critical", "CriticalHigh",
"/Thresholds/UpperCritical/Reading"_json_pointer);
properties.emplace_back(
"xyz.openbmc_project.Sensor.Threshold.Critical", "CriticalLow",
"/Thresholds/LowerCritical/Reading"_json_pointer);
}
else if (sensorType != "power")
{
properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Warning",
"WarningHigh",
"/UpperThresholdNonCritical"_json_pointer);
properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Warning",
"WarningLow",
"/LowerThresholdNonCritical"_json_pointer);
properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Critical",
"CriticalHigh",
"/UpperThresholdCritical"_json_pointer);
properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Critical",
"CriticalLow",
"/LowerThresholdCritical"_json_pointer);
}
// TODO Need to get UpperThresholdFatal and LowerThresholdFatal
if (sensorsAsyncResp->chassisSubNode == sensors::node::sensors)
{
properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MinValue",
"/ReadingRangeMin"_json_pointer);
properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MaxValue",
"/ReadingRangeMax"_json_pointer);
}
else if (sensorType == "temperature")
{
properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MinValue",
"/MinReadingRangeTemp"_json_pointer);
properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MaxValue",
"/MaxReadingRangeTemp"_json_pointer);
}
else if (sensorType != "power")
{
properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MinValue",
"/MinReadingRange"_json_pointer);
properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MaxValue",
"/MaxReadingRange"_json_pointer);
}
for (const std::tuple<const char*, const char*,
nlohmann::json::json_pointer>& p : properties)
{
for (const auto& [interface, values] : interfacesDict)
{
if (interface != std::get<0>(p))
{
continue;
}
for (const auto& [valueName, valueVariant] : values)
{
if (valueName != std::get<1>(p))
{
continue;
}
// The property we want to set may be nested json, so use
// a json_pointer for easy indexing into the json structure.
const nlohmann::json::json_pointer& key = std::get<2>(p);
// Attempt to pull the int64 directly
const int64_t* int64Value = std::get_if<int64_t>(&valueVariant);
const double* doubleValue = std::get_if<double>(&valueVariant);
const uint32_t* uValue = std::get_if<uint32_t>(&valueVariant);
double temp = 0.0;
if (int64Value != nullptr)
{
temp = static_cast<double>(*int64Value);
}
else if (doubleValue != nullptr)
{
temp = *doubleValue;
}
else if (uValue != nullptr)
{
temp = *uValue;
}
else
{
BMCWEB_LOG_ERROR
<< "Got value interface that wasn't int or double";
continue;
}
temp = temp * std::pow(10, scaleMultiplier);
if (forceToInt)
{
sensorJson[key] = static_cast<int64_t>(temp);
}
else
{
sensorJson[key] = temp;
}
}
}
}
sensorsAsyncResp->addMetadata(sensorJson, unit.to_string(),
"/xyz/openbmc_project/sensors/" + sensorType +
"/" + sensorName);
BMCWEB_LOG_DEBUG << "Added sensor " << sensorName;
}
inline void populateFanRedundancy(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp)
{
crow::connections::systemBus->async_method_call(
[sensorsAsyncResp](
const boost::system::error_code ec,
const dbus::utility::MapperGetSubTreeResponse& resp) {
if (ec)
{
return; // don't have to have this interface
}
for (const std::pair<
std::string,
std::vector<std::pair<std::string, std::vector<std::string>>>>&
pathPair : resp)
{
const std::string& path = pathPair.first;
const std::vector<std::pair<std::string, std::vector<std::string>>>&
objDict = pathPair.second;
if (objDict.empty())
{
continue; // this should be impossible
}
const std::string& owner = objDict.begin()->first;
sdbusplus::asio::getProperty<std::vector<std::string>>(
*crow::connections::systemBus,
"xyz.openbmc_project.ObjectMapper", path + "/chassis",
"xyz.openbmc_project.Association", "endpoints",
[path, owner,
sensorsAsyncResp](const boost::system::error_code e,
const std::vector<std::string>& endpoints) {
if (e)
{
return; // if they don't have an association we
// can't tell what chassis is
}
auto found =
std::find_if(endpoints.begin(), endpoints.end(),
[sensorsAsyncResp](const std::string& entry) {
return entry.find(sensorsAsyncResp->chassisId) !=
std::string::npos;
});
if (found == endpoints.end())
{
return;
}
crow::connections::systemBus->async_method_call(
[path, sensorsAsyncResp](
const boost::system::error_code& err,
const std::map<std::string,
dbus::utility::DbusVariantType>& ret) {
if (err)
{
return; // don't have to have this
// interface
}
auto findFailures = ret.find("AllowedFailures");
auto findCollection = ret.find("Collection");
auto findStatus = ret.find("Status");
if (findFailures == ret.end() ||
findCollection == ret.end() || findStatus == ret.end())
{
BMCWEB_LOG_ERROR << "Invalid redundancy interface";
messages::internalError(
sensorsAsyncResp->asyncResp->res);
return;
}
const uint8_t* allowedFailures =
std::get_if<uint8_t>(&(findFailures->second));
const std::vector<std::string>* collection =
std::get_if<std::vector<std::string>>(
&(findCollection->second));
const std::string* status =
std::get_if<std::string>(&(findStatus->second));
if (allowedFailures == nullptr || collection == nullptr ||
status == nullptr)
{
BMCWEB_LOG_ERROR
<< "Invalid redundancy interface types";
messages::internalError(
sensorsAsyncResp->asyncResp->res);
return;
}
sdbusplus::message::object_path objectPath(path);
std::string name = objectPath.filename();
if (name.empty())
{
// this should be impossible
messages::internalError(
sensorsAsyncResp->asyncResp->res);
return;
}
std::replace(name.begin(), name.end(), '_', ' ');
std::string health;
if (status->ends_with("Full"))
{
health = "OK";
}
else if (status->ends_with("Degraded"))
{
health = "Warning";
}
else
{
health = "Critical";
}
nlohmann::json::array_t redfishCollection;
const auto& fanRedfish =
sensorsAsyncResp->asyncResp->res.jsonValue["Fans"];
for (const std::string& item : *collection)
{
sdbusplus::message::object_path itemPath(item);
std::string itemName = itemPath.filename();
if (itemName.empty())
{
continue;
}
/*
todo(ed): merge patch that fixes the names
std::replace(itemName.begin(),
itemName.end(), '_', ' ');*/
auto schemaItem =
std::find_if(fanRedfish.begin(), fanRedfish.end(),
[itemName](const nlohmann::json& fan) {
return fan["MemberId"] == itemName;
});
if (schemaItem != fanRedfish.end())
{
nlohmann::json::object_t collectionId;
collectionId["@odata.id"] =
(*schemaItem)["@odata.id"];
redfishCollection.emplace_back(
std::move(collectionId));
}
else
{
BMCWEB_LOG_ERROR << "failed to find fan in schema";
messages::internalError(
sensorsAsyncResp->asyncResp->res);
return;
}
}
size_t minNumNeeded =
collection->empty()
? 0
: collection->size() - *allowedFailures;
nlohmann::json& jResp = sensorsAsyncResp->asyncResp->res
.jsonValue["Redundancy"];
nlohmann::json::object_t redundancy;
redundancy["@odata.id"] =
"/redfish/v1/Chassis/" + sensorsAsyncResp->chassisId +
"/" + sensorsAsyncResp->chassisSubNode +
"#/Redundancy/" + std::to_string(jResp.size());
redundancy["@odata.type"] = "#Redundancy.v1_3_2.Redundancy";
redundancy["MinNumNeeded"] = minNumNeeded;
redundancy["MemberId"] = name;
redundancy["Mode"] = "N+m";
redundancy["Name"] = name;
redundancy["RedundancySet"] = redfishCollection;
redundancy["Status"]["Health"] = health;
redundancy["Status"]["State"] = "Enabled";
jResp.push_back(std::move(redundancy));
},
owner, path, "org.freedesktop.DBus.Properties", "GetAll",
"xyz.openbmc_project.Control.FanRedundancy");
});
}
},
"xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTree",
"/xyz/openbmc_project/control", 2,
std::array<const char*, 1>{
"xyz.openbmc_project.Control.FanRedundancy"});
}
inline void
sortJSONResponse(const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp)
{
nlohmann::json& response = sensorsAsyncResp->asyncResp->res.jsonValue;
std::array<std::string, 2> sensorHeaders{"Temperatures", "Fans"};
if (sensorsAsyncResp->chassisSubNode == sensors::node::power)
{
sensorHeaders = {"Voltages", "PowerSupplies"};
}
for (const std::string& sensorGroup : sensorHeaders)
{
nlohmann::json::iterator entry = response.find(sensorGroup);
if (entry != response.end())
{
std::sort(entry->begin(), entry->end(),
[](const nlohmann::json& c1, const nlohmann::json& c2) {
return c1["Name"] < c2["Name"];
});
// add the index counts to the end of each entry
size_t count = 0;
for (nlohmann::json& sensorJson : *entry)
{
nlohmann::json::iterator odata = sensorJson.find("@odata.id");
if (odata == sensorJson.end())
{
continue;
}
std::string* value = odata->get_ptr<std::string*>();
if (value != nullptr)
{
*value += std::to_string(count);
count++;
sensorsAsyncResp->updateUri(sensorJson["Name"], *value);
}
}
}
}
}
/**
* @brief Finds the inventory item with the specified object path.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param invItemObjPath D-Bus object path of inventory item.
* @return Inventory item within vector, or nullptr if no match found.
*/
inline InventoryItem* findInventoryItem(
const std::shared_ptr<std::vector<InventoryItem>>& inventoryItems,
const std::string& invItemObjPath)
{
for (InventoryItem& inventoryItem : *inventoryItems)
{
if (inventoryItem.objectPath == invItemObjPath)
{
return &inventoryItem;
}
}
return nullptr;
}
/**
* @brief Finds the inventory item associated with the specified sensor.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param sensorObjPath D-Bus object path of sensor.
* @return Inventory item within vector, or nullptr if no match found.
*/
inline InventoryItem* findInventoryItemForSensor(
const std::shared_ptr<std::vector<InventoryItem>>& inventoryItems,
const std::string& sensorObjPath)
{
for (InventoryItem& inventoryItem : *inventoryItems)
{
if (inventoryItem.sensors.count(sensorObjPath) > 0)
{
return &inventoryItem;
}
}
return nullptr;
}
/**
* @brief Finds the inventory item associated with the specified led path.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param ledObjPath D-Bus object path of led.
* @return Inventory item within vector, or nullptr if no match found.
*/
inline InventoryItem*
findInventoryItemForLed(std::vector<InventoryItem>& inventoryItems,
const std::string& ledObjPath)
{
for (InventoryItem& inventoryItem : inventoryItems)
{
if (inventoryItem.ledObjectPath == ledObjPath)
{
return &inventoryItem;
}
}
return nullptr;
}
/**
* @brief Adds inventory item and associated sensor to specified vector.
*
* Adds a new InventoryItem to the vector if necessary. Searches for an
* existing InventoryItem with the specified object path. If not found, one is
* added to the vector.
*
* Next, the specified sensor is added to the set of sensors associated with the
* InventoryItem.
*
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param invItemObjPath D-Bus object path of inventory item.
* @param sensorObjPath D-Bus object path of sensor
*/
inline void addInventoryItem(
const std::shared_ptr<std::vector<InventoryItem>>& inventoryItems,
const std::string& invItemObjPath, const std::string& sensorObjPath)
{
// Look for inventory item in vector
InventoryItem* inventoryItem =
findInventoryItem(inventoryItems, invItemObjPath);
// If inventory item doesn't exist in vector, add it
if (inventoryItem == nullptr)
{
inventoryItems->emplace_back(invItemObjPath);
inventoryItem = &(inventoryItems->back());
}
// Add sensor to set of sensors associated with inventory item
inventoryItem->sensors.emplace(sensorObjPath);
}
/**
* @brief Stores D-Bus data in the specified inventory item.
*
* Finds D-Bus data in the specified map of interfaces. Stores the data in the
* specified InventoryItem.
*
* This data is later used to provide sensor property values in the JSON
* response.
*
* @param inventoryItem Inventory item where data will be stored.
* @param interfacesDict Map containing D-Bus interfaces and their properties
* for the specified inventory item.
*/
inline void storeInventoryItemData(
InventoryItem& inventoryItem,
const dbus::utility::DBusInteracesMap& interfacesDict)
{
// Get properties from Inventory.Item interface
for (const auto& [interface, values] : interfacesDict)
{
if (interface == "xyz.openbmc_project.Inventory.Item")
{
for (const auto& [name, dbusValue] : values)
{
if (name == "Present")
{
const bool* value = std::get_if<bool>(&dbusValue);
if (value != nullptr)
{
inventoryItem.isPresent = *value;
}
}
}
}
// Check if Inventory.Item.PowerSupply interface is present
if (interface == "xyz.openbmc_project.Inventory.Item.PowerSupply")
{
inventoryItem.isPowerSupply = true;
}
// Get properties from Inventory.Decorator.Asset interface
if (interface == "xyz.openbmc_project.Inventory.Decorator.Asset")
{
for (const auto& [name, dbusValue] : values)
{
if (name == "Manufacturer")
{
const std::string* value =
std::get_if<std::string>(&dbusValue);
if (value != nullptr)
{
inventoryItem.manufacturer = *value;
}
}
if (name == "Model")
{
const std::string* value =
std::get_if<std::string>(&dbusValue);
if (value != nullptr)
{
inventoryItem.model = *value;
}
}
if (name == "SerialNumber")
{
const std::string* value =
std::get_if<std::string>(&dbusValue);
if (value != nullptr)
{
inventoryItem.serialNumber = *value;
}
}
if (name == "PartNumber")
{
const std::string* value =
std::get_if<std::string>(&dbusValue);
if (value != nullptr)
{
inventoryItem.partNumber = *value;
}
}
}
}
if (interface ==
"xyz.openbmc_project.State.Decorator.OperationalStatus")
{
for (const auto& [name, dbusValue] : values)
{
if (name == "Functional")
{
const bool* value = std::get_if<bool>(&dbusValue);
if (value != nullptr)
{
inventoryItem.isFunctional = *value;
}
}
}
}
}
}
/**
* @brief Gets D-Bus data for inventory items associated with sensors.
*
* Uses the specified connections (services) to obtain D-Bus data for inventory
* items associated with sensors. Stores the resulting data in the
* inventoryItems vector.
*
* This data is later used to provide sensor property values in the JSON
* response.
*
* Finds the inventory item data asynchronously. Invokes callback when data has
* been obtained.
*
* The callback must have the following signature:
* @code
* callback(void)
* @endcode
*
* This function is called recursively, obtaining data asynchronously from one
* connection in each call. This ensures the callback is not invoked until the
* last asynchronous function has completed.
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param invConnections Connections that provide data for the inventory items.
* @param objectMgrPaths Mappings from connection name to DBus object path that
* implements ObjectManager.
* @param callback Callback to invoke when inventory data has been obtained.
* @param invConnectionsIndex Current index in invConnections. Only specified
* in recursive calls to this function.
*/
template <typename Callback>
static void getInventoryItemsData(
std::shared_ptr<SensorsAsyncResp> sensorsAsyncResp,
std::shared_ptr<std::vector<InventoryItem>> inventoryItems,
std::shared_ptr<std::set<std::string>> invConnections,
std::shared_ptr<std::map<std::string, std::string>> objectMgrPaths,
Callback&& callback, size_t invConnectionsIndex = 0)
{
BMCWEB_LOG_DEBUG << "getInventoryItemsData enter";
// If no more connections left, call callback
if (invConnectionsIndex >= invConnections->size())
{
callback();
BMCWEB_LOG_DEBUG << "getInventoryItemsData exit";
return;
}
// Get inventory item data from current connection
auto it = invConnections->begin();
std::advance(it, invConnectionsIndex);
if (it != invConnections->end())
{
const std::string& invConnection = *it;
// Response handler for GetManagedObjects
auto respHandler =
[sensorsAsyncResp, inventoryItems, invConnections, objectMgrPaths,
callback{std::forward<Callback>(callback)}, invConnectionsIndex](
const boost::system::error_code ec,
const dbus::utility::ManagedObjectType& resp) {
BMCWEB_LOG_DEBUG << "getInventoryItemsData respHandler enter";
if (ec)
{
BMCWEB_LOG_ERROR
<< "getInventoryItemsData respHandler DBus error " << ec;
messages::internalError(sensorsAsyncResp->asyncResp->res);
return;
}
// Loop through returned object paths
for (const auto& objDictEntry : resp)
{
const std::string& objPath =
static_cast<const std::string&>(objDictEntry.first);
// If this object path is one of the specified inventory items
InventoryItem* inventoryItem =
findInventoryItem(inventoryItems, objPath);
if (inventoryItem != nullptr)
{
// Store inventory data in InventoryItem
storeInventoryItemData(*inventoryItem, objDictEntry.second);
}
}
// Recurse to get inventory item data from next connection
getInventoryItemsData(sensorsAsyncResp, inventoryItems,
invConnections, objectMgrPaths,
std::move(callback), invConnectionsIndex + 1);
BMCWEB_LOG_DEBUG << "getInventoryItemsData respHandler exit";
};
// Find DBus object path that implements ObjectManager for the current
// connection. If no mapping found, default to "/".
auto iter = objectMgrPaths->find(invConnection);
const std::string& objectMgrPath =
(iter != objectMgrPaths->end()) ? iter->second : "/";
BMCWEB_LOG_DEBUG << "ObjectManager path for " << invConnection << " is "
<< objectMgrPath;
// Get all object paths and their interfaces for current connection
crow::connections::systemBus->async_method_call(
std::move(respHandler), invConnection, objectMgrPath,
"org.freedesktop.DBus.ObjectManager", "GetManagedObjects");
}
BMCWEB_LOG_DEBUG << "getInventoryItemsData exit";
}
/**
* @brief Gets connections that provide D-Bus data for inventory items.
*
* Gets the D-Bus connections (services) that provide data for the inventory
* items that are associated with sensors.
*
* Finds the connections asynchronously. Invokes callback when information has
* been obtained.
*
* The callback must have the following signature:
* @code
* callback(std::shared_ptr<std::set<std::string>> invConnections)
* @endcode
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param callback Callback to invoke when connections have been obtained.
*/
template <typename Callback>
static void getInventoryItemsConnections(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
const std::shared_ptr<std::vector<InventoryItem>>& inventoryItems,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getInventoryItemsConnections enter";
const std::string path = "/xyz/openbmc_project/inventory";
const std::array<std::string, 4> interfaces = {
"xyz.openbmc_project.Inventory.Item",
"xyz.openbmc_project.Inventory.Item.PowerSupply",
"xyz.openbmc_project.Inventory.Decorator.Asset",
"xyz.openbmc_project.State.Decorator.OperationalStatus"};
// Response handler for parsing output from GetSubTree
auto respHandler =
[callback{std::forward<Callback>(callback)}, sensorsAsyncResp,
inventoryItems](
const boost::system::error_code ec,
const dbus::utility::MapperGetSubTreeResponse& subtree) {
BMCWEB_LOG_DEBUG << "getInventoryItemsConnections respHandler enter";
if (ec)
{
messages::internalError(sensorsAsyncResp->asyncResp->res);
BMCWEB_LOG_ERROR
<< "getInventoryItemsConnections respHandler DBus error " << ec;
return;
}
// Make unique list of connections for desired inventory items
std::shared_ptr<std::set<std::string>> invConnections =
std::make_shared<std::set<std::string>>();
// Loop through objects from GetSubTree
for (const std::pair<
std::string,
std::vector<std::pair<std::string, std::vector<std::string>>>>&
object : subtree)
{
// Check if object path is one of the specified inventory items
const std::string& objPath = object.first;
if (findInventoryItem(inventoryItems, objPath) != nullptr)
{
// Store all connections to inventory item
for (const std::pair<std::string, std::vector<std::string>>&
objData : object.second)
{
const std::string& invConnection = objData.first;
invConnections->insert(invConnection);
}
}
}
callback(invConnections);
BMCWEB_LOG_DEBUG << "getInventoryItemsConnections respHandler exit";
};
// Make call to ObjectMapper to find all inventory items
crow::connections::systemBus->async_method_call(
std::move(respHandler), "xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTree", path, 0, interfaces);
BMCWEB_LOG_DEBUG << "getInventoryItemsConnections exit";
}
/**
* @brief Gets associations from sensors to inventory items.
*
* Looks for ObjectMapper associations from the specified sensors to related
* inventory items. Then finds the associations from those inventory items to
* their LEDs, if any.
*
* Finds the inventory items asynchronously. Invokes callback when information
* has been obtained.
*
* The callback must have the following signature:
* @code
* callback(std::shared_ptr<std::vector<InventoryItem>> inventoryItems)
* @endcode
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param sensorNames All sensors within the current chassis.
* @param objectMgrPaths Mappings from connection name to DBus object path that
* implements ObjectManager.
* @param callback Callback to invoke when inventory items have been obtained.
*/
template <typename Callback>
static void getInventoryItemAssociations(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
const std::shared_ptr<std::set<std::string>>& sensorNames,
const std::shared_ptr<std::map<std::string, std::string>>& objectMgrPaths,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getInventoryItemAssociations enter";
// Response handler for GetManagedObjects
auto respHandler =
[callback{std::forward<Callback>(callback)}, sensorsAsyncResp,
sensorNames](const boost::system::error_code ec,
const dbus::utility::ManagedObjectType& resp) {
BMCWEB_LOG_DEBUG << "getInventoryItemAssociations respHandler enter";
if (ec)
{
BMCWEB_LOG_ERROR
<< "getInventoryItemAssociations respHandler DBus error " << ec;
messages::internalError(sensorsAsyncResp->asyncResp->res);
return;
}
// Create vector to hold list of inventory items
std::shared_ptr<std::vector<InventoryItem>> inventoryItems =
std::make_shared<std::vector<InventoryItem>>();
// Loop through returned object paths
std::string sensorAssocPath;
sensorAssocPath.reserve(128); // avoid memory allocations
for (const auto& objDictEntry : resp)
{
const std::string& objPath =
static_cast<const std::string&>(objDictEntry.first);
// If path is inventory association for one of the specified sensors
for (const std::string& sensorName : *sensorNames)
{
sensorAssocPath = sensorName;
sensorAssocPath += "/inventory";
if (objPath == sensorAssocPath)
{
// Get Association interface for object path
for (const auto& [interface, values] : objDictEntry.second)
{
if (interface == "xyz.openbmc_project.Association")
{
for (const auto& [valueName, value] : values)
{
if (valueName == "endpoints")
{
const std::vector<std::string>* endpoints =
std::get_if<std::vector<std::string>>(
&value);
if ((endpoints != nullptr) &&
!endpoints->empty())
{
// Add inventory item to vector
const std::string& invItemPath =
endpoints->front();
addInventoryItem(inventoryItems,
invItemPath,
sensorName);
}
}
}
}
}
break;
}
}
}
// Now loop through the returned object paths again, this time to
// find the leds associated with the inventory items we just found
std::string inventoryAssocPath;
inventoryAssocPath.reserve(128); // avoid memory allocations
for (const auto& objDictEntry : resp)
{
const std::string& objPath =
static_cast<const std::string&>(objDictEntry.first);
for (InventoryItem& inventoryItem : *inventoryItems)
{
inventoryAssocPath = inventoryItem.objectPath;
inventoryAssocPath += "/leds";
if (objPath == inventoryAssocPath)
{
for (const auto& [interface, values] : objDictEntry.second)
{
if (interface == "xyz.openbmc_project.Association")
{
for (const auto& [valueName, value] : values)
{
if (valueName == "endpoints")
{
const std::vector<std::string>* endpoints =
std::get_if<std::vector<std::string>>(
&value);
if ((endpoints != nullptr) &&
!endpoints->empty())
{
// Add inventory item to vector
// Store LED path in inventory item
const std::string& ledPath =
endpoints->front();
inventoryItem.ledObjectPath = ledPath;
}
}
}
}
}
break;
}
}
}
callback(inventoryItems);
BMCWEB_LOG_DEBUG << "getInventoryItemAssociations respHandler exit";
};
// Find DBus object path that implements ObjectManager for ObjectMapper
std::string connection = "xyz.openbmc_project.ObjectMapper";
auto iter = objectMgrPaths->find(connection);
const std::string& objectMgrPath =
(iter != objectMgrPaths->end()) ? iter->second : "/";
BMCWEB_LOG_DEBUG << "ObjectManager path for " << connection << " is "
<< objectMgrPath;
// Call GetManagedObjects on the ObjectMapper to get all associations
crow::connections::systemBus->async_method_call(
std::move(respHandler), connection, objectMgrPath,
"org.freedesktop.DBus.ObjectManager", "GetManagedObjects");
BMCWEB_LOG_DEBUG << "getInventoryItemAssociations exit";
}
/**
* @brief Gets D-Bus data for inventory item leds associated with sensors.
*
* Uses the specified connections (services) to obtain D-Bus data for inventory
* item leds associated with sensors. Stores the resulting data in the
* inventoryItems vector.
*
* This data is later used to provide sensor property values in the JSON
* response.
*
* Finds the inventory item led data asynchronously. Invokes callback when data
* has been obtained.
*
* The callback must have the following signature:
* @code
* callback()
* @endcode
*
* This function is called recursively, obtaining data asynchronously from one
* connection in each call. This ensures the callback is not invoked until the
* last asynchronous function has completed.
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param ledConnections Connections that provide data for the inventory leds.
* @param callback Callback to invoke when inventory data has been obtained.
* @param ledConnectionsIndex Current index in ledConnections. Only specified
* in recursive calls to this function.
*/
template <typename Callback>
void getInventoryLedData(
std::shared_ptr<SensorsAsyncResp> sensorsAsyncResp,
std::shared_ptr<std::vector<InventoryItem>> inventoryItems,
std::shared_ptr<std::map<std::string, std::string>> ledConnections,
Callback&& callback, size_t ledConnectionsIndex = 0)
{
BMCWEB_LOG_DEBUG << "getInventoryLedData enter";
// If no more connections left, call callback
if (ledConnectionsIndex >= ledConnections->size())
{
callback();
BMCWEB_LOG_DEBUG << "getInventoryLedData exit";
return;
}
// Get inventory item data from current connection
auto it = ledConnections->begin();
std::advance(it, ledConnectionsIndex);
if (it != ledConnections->end())
{
const std::string& ledPath = (*it).first;
const std::string& ledConnection = (*it).second;
// Response handler for Get State property
auto respHandler =
[sensorsAsyncResp, inventoryItems, ledConnections, ledPath,
callback{std::forward<Callback>(callback)}, ledConnectionsIndex](
const boost::system::error_code ec, const std::string& state) {
BMCWEB_LOG_DEBUG << "getInventoryLedData respHandler enter";
if (ec)
{
BMCWEB_LOG_ERROR
<< "getInventoryLedData respHandler DBus error " << ec;
messages::internalError(sensorsAsyncResp->asyncResp->res);
return;
}
BMCWEB_LOG_DEBUG << "Led state: " << state;
// Find inventory item with this LED object path
InventoryItem* inventoryItem =
findInventoryItemForLed(*inventoryItems, ledPath);
if (inventoryItem != nullptr)
{
// Store LED state in InventoryItem
if (state.ends_with("On"))
{
inventoryItem->ledState = LedState::ON;
}
else if (state.ends_with("Blink"))
{
inventoryItem->ledState = LedState::BLINK;
}
else if (state.ends_with("Off"))
{
inventoryItem->ledState = LedState::OFF;
}
else
{
inventoryItem->ledState = LedState::UNKNOWN;
}
}
// Recurse to get LED data from next connection
getInventoryLedData(sensorsAsyncResp, inventoryItems,
ledConnections, std::move(callback),
ledConnectionsIndex + 1);
BMCWEB_LOG_DEBUG << "getInventoryLedData respHandler exit";
};
// Get the State property for the current LED
sdbusplus::asio::getProperty<std::string>(
*crow::connections::systemBus, ledConnection, ledPath,
"xyz.openbmc_project.Led.Physical", "State",
std::move(respHandler));
}
BMCWEB_LOG_DEBUG << "getInventoryLedData exit";
}
/**
* @brief Gets LED data for LEDs associated with given inventory items.
*
* Gets the D-Bus connections (services) that provide LED data for the LEDs
* associated with the specified inventory items. Then gets the LED data from
* each connection and stores it in the inventory item.
*
* This data is later used to provide sensor property values in the JSON
* response.
*
* Finds the LED data asynchronously. Invokes callback when information has
* been obtained.
*
* The callback must have the following signature:
* @code
* callback()
* @endcode
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param callback Callback to invoke when inventory items have been obtained.
*/
template <typename Callback>
void getInventoryLeds(
std::shared_ptr<SensorsAsyncResp> sensorsAsyncResp,
std::shared_ptr<std::vector<InventoryItem>> inventoryItems,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getInventoryLeds enter";
const std::string path = "/xyz/openbmc_project";
const std::array<std::string, 1> interfaces = {
"xyz.openbmc_project.Led.Physical"};
// Response handler for parsing output from GetSubTree
auto respHandler =
[callback{std::forward<Callback>(callback)}, sensorsAsyncResp,
inventoryItems](
const boost::system::error_code ec,
const dbus::utility::MapperGetSubTreeResponse& subtree) {
BMCWEB_LOG_DEBUG << "getInventoryLeds respHandler enter";
if (ec)
{
messages::internalError(sensorsAsyncResp->asyncResp->res);
BMCWEB_LOG_ERROR << "getInventoryLeds respHandler DBus error "
<< ec;
return;
}
// Build map of LED object paths to connections
std::shared_ptr<std::map<std::string, std::string>> ledConnections =
std::make_shared<std::map<std::string, std::string>>();
// Loop through objects from GetSubTree
for (const std::pair<
std::string,
std::vector<std::pair<std::string, std::vector<std::string>>>>&
object : subtree)
{
// Check if object path is LED for one of the specified inventory
// items
const std::string& ledPath = object.first;
if (findInventoryItemForLed(*inventoryItems, ledPath) != nullptr)
{
// Add mapping from ledPath to connection
const std::string& connection = object.second.begin()->first;
(*ledConnections)[ledPath] = connection;
BMCWEB_LOG_DEBUG << "Added mapping " << ledPath << " -> "
<< connection;
}
}
getInventoryLedData(sensorsAsyncResp, inventoryItems, ledConnections,
std::move(callback));
BMCWEB_LOG_DEBUG << "getInventoryLeds respHandler exit";
};
// Make call to ObjectMapper to find all inventory items
crow::connections::systemBus->async_method_call(
std::move(respHandler), "xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTree", path, 0, interfaces);
BMCWEB_LOG_DEBUG << "getInventoryLeds exit";
}
/**
* @brief Gets D-Bus data for Power Supply Attributes such as EfficiencyPercent
*
* Uses the specified connections (services) (currently assumes just one) to
* obtain D-Bus data for Power Supply Attributes. Stores the resulting data in
* the inventoryItems vector. Only stores data in Power Supply inventoryItems.
*
* This data is later used to provide sensor property values in the JSON
* response.
*
* Finds the Power Supply Attributes data asynchronously. Invokes callback
* when data has been obtained.
*
* The callback must have the following signature:
* @code
* callback(std::shared_ptr<std::vector<InventoryItem>> inventoryItems)
* @endcode
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param psAttributesConnections Connections that provide data for the Power
* Supply Attributes
* @param callback Callback to invoke when data has been obtained.
*/
template <typename Callback>
void getPowerSupplyAttributesData(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
std::shared_ptr<std::vector<InventoryItem>> inventoryItems,
const std::map<std::string, std::string>& psAttributesConnections,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributesData enter";
if (psAttributesConnections.empty())
{
BMCWEB_LOG_DEBUG << "Can't find PowerSupplyAttributes, no connections!";
callback(inventoryItems);
return;
}
// Assuming just one connection (service) for now
auto it = psAttributesConnections.begin();
const std::string& psAttributesPath = (*it).first;
const std::string& psAttributesConnection = (*it).second;
// Response handler for Get DeratingFactor property
auto respHandler =
[sensorsAsyncResp, inventoryItems,
callback{std::forward<Callback>(callback)}](
const boost::system::error_code ec, const uint32_t value) {
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributesData respHandler enter";
if (ec)
{
BMCWEB_LOG_ERROR
<< "getPowerSupplyAttributesData respHandler DBus error " << ec;
messages::internalError(sensorsAsyncResp->asyncResp->res);
return;
}
BMCWEB_LOG_DEBUG << "PS EfficiencyPercent value: " << value;
// Store value in Power Supply Inventory Items
for (InventoryItem& inventoryItem : *inventoryItems)
{
if (inventoryItem.isPowerSupply)
{
inventoryItem.powerSupplyEfficiencyPercent =
static_cast<int>(value);
}
}
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributesData respHandler exit";
callback(inventoryItems);
};
// Get the DeratingFactor property for the PowerSupplyAttributes
// Currently only property on the interface/only one we care about
sdbusplus::asio::getProperty<uint32_t>(
*crow::connections::systemBus, psAttributesConnection, psAttributesPath,
"xyz.openbmc_project.Control.PowerSupplyAttributes", "DeratingFactor",
std::move(respHandler));
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributesData exit";
}
/**
* @brief Gets the Power Supply Attributes such as EfficiencyPercent
*
* Gets the D-Bus connection (service) that provides Power Supply Attributes
* data. Then gets the Power Supply Attributes data from the connection
* (currently just assumes 1 connection) and stores the data in the inventory
* item.
*
* This data is later used to provide sensor property values in the JSON
* response. DeratingFactor on D-Bus is mapped to EfficiencyPercent on Redfish.
*
* Finds the Power Supply Attributes data asynchronously. Invokes callback
* when information has been obtained.
*
* The callback must have the following signature:
* @code
* callback(std::shared_ptr<std::vector<InventoryItem>> inventoryItems)
* @endcode
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param inventoryItems D-Bus inventory items associated with sensors.
* @param callback Callback to invoke when data has been obtained.
*/
template <typename Callback>
void getPowerSupplyAttributes(
std::shared_ptr<SensorsAsyncResp> sensorsAsyncResp,
std::shared_ptr<std::vector<InventoryItem>> inventoryItems,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributes enter";
// Only need the power supply attributes when the Power Schema
if (sensorsAsyncResp->chassisSubNode != sensors::node::power)
{
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributes exit since not Power";
callback(inventoryItems);
return;
}
const std::array<std::string, 1> interfaces = {
"xyz.openbmc_project.Control.PowerSupplyAttributes"};
// Response handler for parsing output from GetSubTree
auto respHandler =
[callback{std::forward<Callback>(callback)}, sensorsAsyncResp,
inventoryItems](
const boost::system::error_code ec,
const dbus::utility::MapperGetSubTreeResponse& subtree) {
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributes respHandler enter";
if (ec)
{
messages::internalError(sensorsAsyncResp->asyncResp->res);
BMCWEB_LOG_ERROR
<< "getPowerSupplyAttributes respHandler DBus error " << ec;
return;
}
if (subtree.empty())
{
BMCWEB_LOG_DEBUG << "Can't find Power Supply Attributes!";
callback(inventoryItems);
return;
}
// Currently we only support 1 power supply attribute, use this for
// all the power supplies. Build map of object path to connection.
// Assume just 1 connection and 1 path for now.
std::map<std::string, std::string> psAttributesConnections;
if (subtree[0].first.empty() || subtree[0].second.empty())
{
BMCWEB_LOG_DEBUG << "Power Supply Attributes mapper error!";
callback(inventoryItems);
return;
}
const std::string& psAttributesPath = subtree[0].first;
const std::string& connection = subtree[0].second.begin()->first;
if (connection.empty())
{
BMCWEB_LOG_DEBUG << "Power Supply Attributes mapper error!";
callback(inventoryItems);
return;
}
psAttributesConnections[psAttributesPath] = connection;
BMCWEB_LOG_DEBUG << "Added mapping " << psAttributesPath << " -> "
<< connection;
getPowerSupplyAttributesData(sensorsAsyncResp, inventoryItems,
psAttributesConnections,
std::move(callback));
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributes respHandler exit";
};
// Make call to ObjectMapper to find the PowerSupplyAttributes service
crow::connections::systemBus->async_method_call(
std::move(respHandler), "xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTree",
"/xyz/openbmc_project", 0, interfaces);
BMCWEB_LOG_DEBUG << "getPowerSupplyAttributes exit";
}
/**
* @brief Gets inventory items associated with sensors.
*
* Finds the inventory items that are associated with the specified sensors.
* Then gets D-Bus data for the inventory items, such as presence and VPD.
*
* This data is later used to provide sensor property values in the JSON
* response.
*
* Finds the inventory items asynchronously. Invokes callback when the
* inventory items have been obtained.
*
* The callback must have the following signature:
* @code
* callback(std::shared_ptr<std::vector<InventoryItem>> inventoryItems)
* @endcode
*
* @param sensorsAsyncResp Pointer to object holding response data.
* @param sensorNames All sensors within the current chassis.
* @param objectMgrPaths Mappings from connection name to DBus object path that
* implements ObjectManager.
* @param callback Callback to invoke when inventory items have been obtained.
*/
template <typename Callback>
static void getInventoryItems(
std::shared_ptr<SensorsAsyncResp> sensorsAsyncResp,
const std::shared_ptr<std::set<std::string>> sensorNames,
std::shared_ptr<std::map<std::string, std::string>> objectMgrPaths,
Callback&& callback)
{
BMCWEB_LOG_DEBUG << "getInventoryItems enter";
auto getInventoryItemAssociationsCb =
[sensorsAsyncResp, objectMgrPaths,
callback{std::forward<Callback>(callback)}](
std::shared_ptr<std::vector<InventoryItem>> inventoryItems) {
BMCWEB_LOG_DEBUG << "getInventoryItemAssociationsCb enter";
auto getInventoryItemsConnectionsCb =
[sensorsAsyncResp, inventoryItems, objectMgrPaths,
callback{std::forward<const Callback>(callback)}](
std::shared_ptr<std::set<std::string>> invConnections) {
BMCWEB_LOG_DEBUG << "getInventoryItemsConnectionsCb enter";
auto getInventoryItemsDataCb = [sensorsAsyncResp, inventoryItems,
callback{std::move(callback)}]() {
BMCWEB_LOG_DEBUG << "getInventoryItemsDataCb enter";
auto getInventoryLedsCb = [sensorsAsyncResp, inventoryItems,
callback{std::move(callback)}]() {
BMCWEB_LOG_DEBUG << "getInventoryLedsCb enter";
// Find Power Supply Attributes and get the data
getPowerSupplyAttributes(sensorsAsyncResp, inventoryItems,
std::move(callback));
BMCWEB_LOG_DEBUG << "getInventoryLedsCb exit";
};
// Find led connections and get the data
getInventoryLeds(sensorsAsyncResp, inventoryItems,
std::move(getInventoryLedsCb));
BMCWEB_LOG_DEBUG << "getInventoryItemsDataCb exit";
};
// Get inventory item data from connections
getInventoryItemsData(sensorsAsyncResp, inventoryItems,
invConnections, objectMgrPaths,
std::move(getInventoryItemsDataCb));
BMCWEB_LOG_DEBUG << "getInventoryItemsConnectionsCb exit";
};
// Get connections that provide inventory item data
getInventoryItemsConnections(sensorsAsyncResp, inventoryItems,
std::move(getInventoryItemsConnectionsCb));
BMCWEB_LOG_DEBUG << "getInventoryItemAssociationsCb exit";
};
// Get associations from sensors to inventory items
getInventoryItemAssociations(sensorsAsyncResp, sensorNames, objectMgrPaths,
std::move(getInventoryItemAssociationsCb));
BMCWEB_LOG_DEBUG << "getInventoryItems exit";
}
/**
* @brief Returns JSON PowerSupply object for the specified inventory item.
*
* Searches for a JSON PowerSupply object that matches the specified inventory
* item. If one is not found, a new PowerSupply object is added to the JSON
* array.
*
* Multiple sensors are often associated with one power supply inventory item.
* As a result, multiple sensor values are stored in one JSON PowerSupply
* object.
*
* @param powerSupplyArray JSON array containing Redfish PowerSupply objects.
* @param inventoryItem Inventory item for the power supply.
* @param chassisId Chassis that contains the power supply.
* @return JSON PowerSupply object for the specified inventory item.
*/
inline nlohmann::json& getPowerSupply(nlohmann::json& powerSupplyArray,
const InventoryItem& inventoryItem,
const std::string& chassisId)
{
// Check if matching PowerSupply object already exists in JSON array
for (nlohmann::json& powerSupply : powerSupplyArray)
{
if (powerSupply["MemberId"] == inventoryItem.name)
{
return powerSupply;
}
}
// Add new PowerSupply object to JSON array
powerSupplyArray.push_back({});
nlohmann::json& powerSupply = powerSupplyArray.back();
powerSupply["@odata.id"] =
"/redfish/v1/Chassis/" + chassisId + "/Power#/PowerSupplies/";
powerSupply["MemberId"] = inventoryItem.name;
powerSupply["Name"] = boost::replace_all_copy(inventoryItem.name, "_", " ");
powerSupply["Manufacturer"] = inventoryItem.manufacturer;
powerSupply["Model"] = inventoryItem.model;
powerSupply["PartNumber"] = inventoryItem.partNumber;
powerSupply["SerialNumber"] = inventoryItem.serialNumber;
setLedState(powerSupply, &inventoryItem);
if (inventoryItem.powerSupplyEfficiencyPercent >= 0)
{
powerSupply["EfficiencyPercent"] =
inventoryItem.powerSupplyEfficiencyPercent;
}
powerSupply["Status"]["State"] = getState(&inventoryItem);
const char* health = inventoryItem.isFunctional ? "OK" : "Critical";
powerSupply["Status"]["Health"] = health;
return powerSupply;
}
/**
* @brief Gets the values of the specified sensors.
*
* Stores the results as JSON in the SensorsAsyncResp.
*
* Gets the sensor values asynchronously. Stores the results later when the
* information has been obtained.
*
* The sensorNames set contains all requested sensors for the current chassis.
*
* To minimize the number of DBus calls, the DBus method
* org.freedesktop.DBus.ObjectManager.GetManagedObjects() is used to get the
* values of all sensors provided by a connection (service).
*
* The connections set contains all the connections that provide sensor values.
*
* The objectMgrPaths map contains mappings from a connection name to the
* corresponding DBus object path that implements ObjectManager.
*
* The InventoryItem vector contains D-Bus inventory items associated with the
* sensors. Inventory item data is needed for some Redfish sensor properties.
*
* @param SensorsAsyncResp Pointer to object holding response data.
* @param sensorNames All requested sensors within the current chassis.
* @param connections Connections that provide sensor values.
* @param objectMgrPaths Mappings from connection name to DBus object path that
* implements ObjectManager.
* @param inventoryItems Inventory items associated with the sensors.
*/
inline void getSensorData(
const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
const std::shared_ptr<std::set<std::string>>& sensorNames,
const std::set<std::string>& connections,
const std::shared_ptr<std::map<std::string, std::string>>& objectMgrPaths,
const std::shared_ptr<std::vector<InventoryItem>>& inventoryItems)
{
BMCWEB_LOG_DEBUG << "getSensorData enter";
// Get managed objects from all services exposing sensors
for (const std::string& connection : connections)
{
// Response handler to process managed objects
auto getManagedObjectsCb =
[sensorsAsyncResp, sensorNames,
inventoryItems](const boost::system::error_code ec,
const dbus::utility::ManagedObjectType& resp) {
BMCWEB_LOG_DEBUG << "getManagedObjectsCb enter";
if (ec)
{
BMCWEB_LOG_ERROR << "getManagedObjectsCb DBUS error: " << ec;
messages::internalError(sensorsAsyncResp->asyncResp->res);
return;
}
// Go through all objects and update response with sensor data
for (const auto& objDictEntry : resp)
{
const std::string& objPath =
static_cast<const std::string&>(objDictEntry.first);
BMCWEB_LOG_DEBUG << "getManagedObjectsCb parsing object "
<< objPath;
std::vector<std::string> split;
// Reserve space for
// /xyz/openbmc_project/sensors/<name>/<subname>
split.reserve(6);
boost::algorithm::split(split, objPath, boost::is_any_of("/"));
if (split.size() < 6)
{
BMCWEB_LOG_ERROR << "Got path that isn't long enough "
<< objPath;
continue;
}
// These indexes aren't intuitive, as boost::split puts an empty
// string at the beginning
const std::string& sensorType = split[4];
const std::string& sensorName = split[5];
BMCWEB_LOG_DEBUG << "sensorName " << sensorName
<< " sensorType " << sensorType;
if (sensorNames->find(objPath) == sensorNames->end())
{
BMCWEB_LOG_DEBUG << sensorName << " not in sensor list ";
continue;
}
// Find inventory item (if any) associated with sensor
InventoryItem* inventoryItem =
findInventoryItemForSensor(inventoryItems, objPath);
const std::string& sensorSchema =
sensorsAsyncResp->chassisSubNode;
nlohmann::json* sensorJson = nullptr;
if (sensorSchema == sensors::node::sensors &&
!sensorsAsyncResp->efficientExpand)
{
sensorsAsyncResp->asyncResp->res.jsonValue["@odata.id"] =
"/redfish/v1/Chassis/" + sensorsAsyncResp->chassisId +
"/" + sensorsAsyncResp->chassisSubNode + "/" +
sensorName;
sensorJson = &(sensorsAsyncResp->asyncResp->res.jsonValue);
}
else
{
std::string fieldName;
if (sensorsAsyncResp->efficientExpand)
{
fieldName = "Members";
}
else if (sensorType == "temperature")
{
fieldName = "Temperatures";
}
else if (sensorType == "fan" || sensorType == "fan_tach" ||
sensorType == "fan_pwm")
{
fieldName = "Fans";
}
else if (sensorType == "voltage")
{
fieldName = "Voltages";
}
else if (sensorType == "power")
{
if (sensorName == "total_power")
{
fieldName = "PowerControl";
}
else if ((inventoryItem != nullptr) &&
(inventoryItem->isPowerSupply))
{
fieldName = "PowerSupplies";
}
else
{
// Other power sensors are in SensorCollection
continue;
}
}
else
{
BMCWEB_LOG_ERROR << "Unsure how to handle sensorType "
<< sensorType;
continue;
}
nlohmann::json& tempArray =
sensorsAsyncResp->asyncResp->res.jsonValue[fieldName];
if (fieldName == "PowerControl")
{
if (tempArray.empty())
{
// Put multiple "sensors" into a single
// PowerControl. Follows MemberId naming and
// naming in power.hpp.
nlohmann::json::object_t power;
power["@odata.id"] =
"/redfish/v1/Chassis/" +
sensorsAsyncResp->chassisId + "/" +
sensorsAsyncResp->chassisSubNode + "#/" +
fieldName + "/0";
tempArray.push_back(std::move(power));
}
sensorJson = &(tempArray.back());
}
else if (fieldName == "PowerSupplies")
{
if (inventoryItem != nullptr)
{
sensorJson =
&(getPowerSupply(tempArray, *inventoryItem,
sensorsAsyncResp->chassisId));
}
}
else if (fieldName == "Members")
{
nlohmann::json::object_t member;
member["@odata.id"] =
"/redfish/v1/Chassis/" +
sensorsAsyncResp->chassisId + "/" +
sensorsAsyncResp->chassisSubNode + "/" + sensorName;
tempArray.push_back(std::move(member));
sensorJson = &(tempArray.back());
}
else
{
nlohmann::json::object_t member;
member["@odata.id"] = "/redfish/v1/Chassis/" +
sensorsAsyncResp->chassisId +
"/" +
sensorsAsyncResp->chassisSubNode +
"#/" + fieldName + "/";
tempArray.push_back(std::move(member));
sensorJson = &(tempArray.back());
}
}
if (sensorJson != nullptr)
{
objectInterfacesToJson(
sensorName, sensorType, sensorsAsyncResp,
objDictEntry.second, *sensorJson, inventoryItem);
}
}
if (sensorsAsyncResp.use_count() == 1)
{
sortJSONResponse(sensorsAsyncResp);
if (sensorsAsyncResp->chassisSubNode ==
sensors::node::sensors &&
sensorsAsyncResp->efficientExpand)
{
sensorsAsyncResp->asyncResp->res
.jsonValue["Members@odata.count"] =
sensorsAsyncResp->asyncResp->res.jsonValue["Members"]
.size();
}
else if (sensorsAsyncResp->chassisSubNode ==
sensors::node::thermal)
{
populateFanRedundancy(sensorsAsyncResp);
}
}
BMCWEB_LOG_DEBUG << "getManagedObjectsCb exit";
};
// Find DBus object path that implements ObjectManager for the current
// connection. If no mapping found, default to "/".
auto iter = objectMgrPaths->find(connection);
const std::string& objectMgrPath =
(iter != objectMgrPaths->end()) ? iter->second : "/";
BMCWEB_LOG_DEBUG << "ObjectManager path for " << connection << " is "
<< objectMgrPath;
crow::connections::systemBus->async_method_call(
getManagedObjectsCb, connection, objectMgrPath,
"org.freedesktop.DBus.ObjectManager", "GetManagedObjects");
}
BMCWEB_LOG_DEBUG << "getSensorData exit";
}
inline void
processSensorList(const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp,
const std::shared_ptr<std::set<std::string>>& sensorNames)
{
auto getConnectionCb = [sensorsAsyncResp, sensorNames](
const std::set<std::string>& connections) {
BMCWEB_LOG_DEBUG << "getConnectionCb enter";
auto getObjectManagerPathsCb =
[sensorsAsyncResp, sensorNames, connections](
const std::shared_ptr<std::map<std::string, std::string>>&
objectMgrPaths) {
BMCWEB_LOG_DEBUG << "getObjectManagerPathsCb enter";
auto getInventoryItemsCb =
[sensorsAsyncResp, sensorNames, connections, objectMgrPaths](
const std::shared_ptr<std::vector<InventoryItem>>&
inventoryItems) {
BMCWEB_LOG_DEBUG << "getInventoryItemsCb enter";
// Get sensor data and store results in JSON
getSensorData(sensorsAsyncResp, sensorNames, connections,
objectMgrPaths, inventoryItems);
BMCWEB_LOG_DEBUG << "getInventoryItemsCb exit";
};
// Get inventory items associated with sensors
getInventoryItems(sensorsAsyncResp, sensorNames, objectMgrPaths,
std::move(getInventoryItemsCb));
BMCWEB_LOG_DEBUG << "getObjectManagerPathsCb exit";
};
// Get mapping from connection names to the DBus object
// paths that implement the ObjectManager interface
getObjectManagerPaths(sensorsAsyncResp,
std::move(getObjectManagerPathsCb));
BMCWEB_LOG_DEBUG << "getConnectionCb exit";
};
// Get set of connections that provide sensor values
getConnections(sensorsAsyncResp, sensorNames, std::move(getConnectionCb));
}
/**
* @brief Entry point for retrieving sensors data related to requested
* chassis.
* @param SensorsAsyncResp Pointer to object holding response data
*/
inline void
getChassisData(const std::shared_ptr<SensorsAsyncResp>& sensorsAsyncResp)
{
BMCWEB_LOG_DEBUG << "getChassisData enter";
auto getChassisCb =
[sensorsAsyncResp](
const std::shared_ptr<std::set<std::string>>& sensorNames) {
BMCWEB_LOG_DEBUG << "getChassisCb enter";
processSensorList(sensorsAsyncResp, sensorNames);
BMCWEB_LOG_DEBUG << "getChassisCb exit";
};
// SensorCollection doesn't contain the Redundancy property
if (sensorsAsyncResp->chassisSubNode != sensors::node::sensors)
{
sensorsAsyncResp->asyncResp->res.jsonValue["Redundancy"] =
nlohmann::json::array();
}
// Get set of sensors in chassis
getChassis(sensorsAsyncResp, std::move(getChassisCb));
BMCWEB_LOG_DEBUG << "getChassisData exit";
}
/**
* @brief Find the requested sensorName in the list of all sensors supplied by
* the chassis node
*
* @param sensorName The sensor name supplied in the PATCH request
* @param sensorsList The list of sensors managed by the chassis node
* @param sensorsModified The list of sensors that were found as a result of
* repeated calls to this function
*/
inline bool
findSensorNameUsingSensorPath(std::string_view sensorName,
const std::set<std::string>& sensorsList,
std::set<std::string>& sensorsModified)
{
for (const auto& chassisSensor : sensorsList)
{
sdbusplus::message::object_path path(chassisSensor);
std::string thisSensorName = path.filename();
if (thisSensorName.empty())
{
continue;
}
if (thisSensorName == sensorName)
{
sensorsModified.emplace(chassisSensor);
return true;
}
}
return false;
}
/**
* @brief Entry point for overriding sensor values of given sensor
*
* @param sensorAsyncResp response object
* @param allCollections Collections extract from sensors' request patch info
* @param chassisSubNode Chassis Node for which the query has to happen
*/
inline void setSensorsOverride(
const std::shared_ptr<SensorsAsyncResp>& sensorAsyncResp,
std::unordered_map<std::string, std::vector<nlohmann::json>>&
allCollections)
{
BMCWEB_LOG_INFO << "setSensorsOverride for subNode"
<< sensorAsyncResp->chassisSubNode << "\n";
const char* propertyValueName = nullptr;
std::unordered_map<std::string, std::pair<double, std::string>> overrideMap;
std::string memberId;
double value = 0.0;
for (auto& collectionItems : allCollections)
{
if (collectionItems.first == "Temperatures")
{
propertyValueName = "ReadingCelsius";
}
else if (collectionItems.first == "Fans")
{
propertyValueName = "Reading";
}
else
{
propertyValueName = "ReadingVolts";
}
for (auto& item : collectionItems.second)
{
if (!json_util::readJson(item, sensorAsyncResp->asyncResp->res,
"MemberId", memberId, propertyValueName,
value))
{
return;
}
overrideMap.emplace(memberId,
std::make_pair(value, collectionItems.first));
}
}
auto getChassisSensorListCb =
[sensorAsyncResp, overrideMap](
const std::shared_ptr<std::set<std::string>>& sensorsList) {
// Match sensor names in the PATCH request to those managed by the
// chassis node
const std::shared_ptr<std::set<std::string>> sensorNames =
std::make_shared<std::set<std::string>>();
for (const auto& item : overrideMap)
{
const auto& sensor = item.first;
if (!findSensorNameUsingSensorPath(sensor, *sensorsList,
*sensorNames))
{
BMCWEB_LOG_INFO << "Unable to find memberId " << item.first;
messages::resourceNotFound(sensorAsyncResp->asyncResp->res,
item.second.second, item.first);
return;
}
}
// Get the connection to which the memberId belongs
auto getObjectsWithConnectionCb =
[sensorAsyncResp,
overrideMap](const std::set<std::string>& /*connections*/,
const std::set<std::pair<std::string, std::string>>&
objectsWithConnection) {
if (objectsWithConnection.size() != overrideMap.size())
{
BMCWEB_LOG_INFO
<< "Unable to find all objects with proper connection "
<< objectsWithConnection.size() << " requested "
<< overrideMap.size() << "\n";
messages::resourceNotFound(sensorAsyncResp->asyncResp->res,
sensorAsyncResp->chassisSubNode ==
sensors::node::thermal
? "Temperatures"
: "Voltages",
"Count");
return;
}
for (const auto& item : objectsWithConnection)
{
sdbusplus::message::object_path path(item.first);
std::string sensorName = path.filename();
if (sensorName.empty())
{
messages::internalError(sensorAsyncResp->asyncResp->res);
return;
}
const auto& iterator = overrideMap.find(sensorName);
if (iterator == overrideMap.end())
{
BMCWEB_LOG_INFO << "Unable to find sensor object"
<< item.first << "\n";
messages::internalError(sensorAsyncResp->asyncResp->res);
return;
}
crow::connections::systemBus->async_method_call(
[sensorAsyncResp](const boost::system::error_code ec) {
if (ec)
{
if (ec.value() ==
boost::system::errc::permission_denied)
{
BMCWEB_LOG_WARNING
<< "Manufacturing mode is not Enabled...can't "
"Override the sensor value. ";
messages::insufficientPrivilege(
sensorAsyncResp->asyncResp->res);
return;
}
BMCWEB_LOG_DEBUG
<< "setOverrideValueStatus DBUS error: " << ec;
messages::internalError(
sensorAsyncResp->asyncResp->res);
}
},
item.second, item.first, "org.freedesktop.DBus.Properties",
"Set", "xyz.openbmc_project.Sensor.Value", "Value",
dbus::utility::DbusVariantType(iterator->second.first));
}
};
// Get object with connection for the given sensor name
getObjectsWithConnection(sensorAsyncResp, sensorNames,
std::move(getObjectsWithConnectionCb));
};
// get full sensor list for the given chassisId and cross verify the sensor.
getChassis(sensorAsyncResp, std::move(getChassisSensorListCb));
}
/**
* @brief Retrieves mapping of Redfish URIs to sensor value property to D-Bus
* path of the sensor.
*
* Function builds valid Redfish response for sensor query of given chassis and
* node. It then builds metadata about Redfish<->D-Bus correlations and provides
* it to caller in a callback.
*
* @param chassis Chassis for which retrieval should be performed
* @param node Node (group) of sensors. See sensors::node for supported values
* @param mapComplete Callback to be called with retrieval result
*/
inline void retrieveUriToDbusMap(const std::string& chassis,
const std::string& node,
SensorsAsyncResp::DataCompleteCb&& mapComplete)
{
decltype(sensors::paths)::const_iterator pathIt =
std::find_if(sensors::paths.cbegin(), sensors::paths.cend(),
[&node](auto&& val) { return val.first == node; });
if (pathIt == sensors::paths.cend())
{
BMCWEB_LOG_ERROR << "Wrong node provided : " << node;
mapComplete(boost::beast::http::status::bad_request, {});
return;
}
auto asyncResp = std::make_shared<bmcweb::AsyncResp>();
auto callback = [asyncResp, mapCompleteCb{std::move(mapComplete)}](
const boost::beast::http::status status,
const std::map<std::string, std::string>& uriToDbus) {
mapCompleteCb(status, uriToDbus);
};
auto resp = std::make_shared<SensorsAsyncResp>(
asyncResp, chassis, pathIt->second, node, std::move(callback));
getChassisData(resp);
}
namespace sensors
{
inline void getChassisCallback(
const std::shared_ptr<SensorsAsyncResp>& asyncResp,
const std::shared_ptr<std::set<std::string>>& sensorNames)
{
BMCWEB_LOG_DEBUG << "getChassisCallback enter";
nlohmann::json& entriesArray =
asyncResp->asyncResp->res.jsonValue["Members"];
for (const auto& sensor : *sensorNames)
{
BMCWEB_LOG_DEBUG << "Adding sensor: " << sensor;
sdbusplus::message::object_path path(sensor);
std::string sensorName = path.filename();
if (sensorName.empty())
{
BMCWEB_LOG_ERROR << "Invalid sensor path: " << sensor;
messages::internalError(asyncResp->asyncResp->res);
return;
}
nlohmann::json::object_t member;
member["@odata.id"] = "/redfish/v1/Chassis/" + asyncResp->chassisId +
"/" + asyncResp->chassisSubNode + "/" +
sensorName;
entriesArray.push_back(std::move(member));
}
asyncResp->asyncResp->res.jsonValue["Members@odata.count"] =
entriesArray.size();
BMCWEB_LOG_DEBUG << "getChassisCallback exit";
}
inline void
handleSensorCollectionGet(App& app, const crow::Request& req,
const std::shared_ptr<bmcweb::AsyncResp>& aResp,
const std::string& chassisId)
{
query_param::QueryCapabilities capabilities = {
.canDelegateExpandLevel = 1,
};
query_param::Query delegatedQuery;
if (!redfish::setUpRedfishRouteWithDelegation(app, req, aResp,
delegatedQuery, capabilities))
{
return;
}
if (delegatedQuery.expandType != query_param::ExpandType::None)
{
// we perform efficient expand.
auto asyncResp = std::make_shared<SensorsAsyncResp>(
aResp, chassisId, sensors::dbus::sensorPaths,
sensors::node::sensors,
/*efficientExpand=*/true);
getChassisData(asyncResp);
BMCWEB_LOG_DEBUG
<< "SensorCollection doGet exit via efficient expand handler";
return;
}
// if there's no efficient expand available, we use the default
// Query Parameters route
auto asyncResp = std::make_shared<SensorsAsyncResp>(
aResp, chassisId, sensors::dbus::sensorPaths, sensors::node::sensors);
// We get all sensors as hyperlinkes in the chassis (this
// implies we reply on the default query parameters handler)
getChassis(asyncResp,
std::bind_front(sensors::getChassisCallback, asyncResp));
BMCWEB_LOG_DEBUG << "SensorCollection doGet exit";
}
inline void handleSensorGet(App& app, const crow::Request& req,
const std::shared_ptr<bmcweb::AsyncResp>& aResp,
const std::string& chassisId,
const std::string& sensorName)
{
if (!redfish::setUpRedfishRoute(app, req, aResp))
{
return;
}
BMCWEB_LOG_DEBUG << "Sensor doGet enter";
std::shared_ptr<SensorsAsyncResp> asyncResp =
std::make_shared<SensorsAsyncResp>(aResp, chassisId,
std::span<std::string_view>(),
sensors::node::sensors);
const std::array<const char*, 1> interfaces = {
"xyz.openbmc_project.Sensor.Value"};
// Get a list of all of the sensors that implement Sensor.Value
// and get the path and service name associated with the sensor
crow::connections::systemBus->async_method_call(
[asyncResp,
sensorName](const boost::system::error_code ec,
const ::dbus::utility::MapperGetSubTreeResponse& subtree) {
BMCWEB_LOG_DEBUG << "respHandler1 enter";
if (ec)
{
messages::internalError(asyncResp->asyncResp->res);
BMCWEB_LOG_ERROR << "Sensor getSensorPaths resp_handler: "
<< "Dbus error " << ec;
return;
}
::dbus::utility::MapperGetSubTreeResponse::const_iterator it =
std::find_if(
subtree.begin(), subtree.end(),
[sensorName](
const std::pair<
std::string,
std::vector<std::pair<
std::string, std::vector<std::string>>>>& object) {
sdbusplus::message::object_path path(object.first);
std::string name = path.filename();
if (name.empty())
{
BMCWEB_LOG_ERROR << "Invalid sensor path: " << object.first;
return false;
}
return name == sensorName;
});
if (it == subtree.end())
{
BMCWEB_LOG_ERROR << "Could not find path for sensor: "
<< sensorName;
messages::resourceNotFound(asyncResp->asyncResp->res, "Sensor",
sensorName);
return;
}
std::string_view sensorPath = (*it).first;
BMCWEB_LOG_DEBUG << "Found sensor path for sensor '" << sensorName
<< "': " << sensorPath;
const std::shared_ptr<std::set<std::string>> sensorList =
std::make_shared<std::set<std::string>>();
sensorList->emplace(sensorPath);
processSensorList(asyncResp, sensorList);
BMCWEB_LOG_DEBUG << "respHandler1 exit";
},
"xyz.openbmc_project.ObjectMapper",
"/xyz/openbmc_project/object_mapper",
"xyz.openbmc_project.ObjectMapper", "GetSubTree",
"/xyz/openbmc_project/sensors", 2, interfaces);
}
} // namespace sensors
inline void requestRoutesSensorCollection(App& app)
{
BMCWEB_ROUTE(app, "/redfish/v1/Chassis/<str>/Sensors/")
.privileges(redfish::privileges::getSensorCollection)
.methods(boost::beast::http::verb::get)(
std::bind_front(sensors::handleSensorCollectionGet, std::ref(app)));
}
inline void requestRoutesSensor(App& app)
{
BMCWEB_ROUTE(app, "/redfish/v1/Chassis/<str>/Sensors/<str>/")
.privileges(redfish::privileges::getSensor)
.methods(boost::beast::http::verb::get)(
std::bind_front(sensors::handleSensorGet, std::ref(app)));
}
} // namespace redfish