| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| #pragma once |
| |
| #include "health.hpp" |
| #include "led.hpp" |
| #include "pcie.hpp" |
| #include "redfish_util.hpp" |
| |
| #include <app.hpp> |
| #include <boost/container/flat_map.hpp> |
| #include <registries/privilege_registry.hpp> |
| #include <utils/fw_utils.hpp> |
| #include <utils/json_utils.hpp> |
| |
| #include <variant> |
| |
| namespace redfish |
| { |
| |
| /** |
| * @brief Updates the Functional State of DIMMs |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls |
| * @param[in] dimmState Dimm's Functional state, true/false |
| * |
| * @return None. |
| */ |
| inline void |
| updateDimmProperties(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::variant<bool>& dimmState) |
| { |
| const bool* isDimmFunctional = std::get_if<bool>(&dimmState); |
| if (isDimmFunctional == nullptr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Dimm Functional: " << *isDimmFunctional; |
| |
| // Set it as Enabled if at least one DIMM is functional |
| // Update STATE only if previous State was DISABLED and current Dimm is |
| // ENABLED. |
| nlohmann::json& prevMemSummary = |
| aResp->res.jsonValue["MemorySummary"]["Status"]["State"]; |
| if (prevMemSummary == "Disabled") |
| { |
| if (*isDimmFunctional == true) |
| { |
| aResp->res.jsonValue["MemorySummary"]["Status"]["State"] = |
| "Enabled"; |
| } |
| } |
| } |
| |
| /* |
| * @brief Update "ProcessorSummary" "Count" based on Cpu PresenceState |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls |
| * @param[in] cpuPresenceState CPU present or not |
| * |
| * @return None. |
| */ |
| inline void |
| modifyCpuPresenceState(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::variant<bool>& cpuPresenceState) |
| { |
| const bool* isCpuPresent = std::get_if<bool>(&cpuPresenceState); |
| |
| if (isCpuPresent == nullptr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Cpu Present: " << *isCpuPresent; |
| |
| if (*isCpuPresent == true) |
| { |
| nlohmann::json& procCount = |
| aResp->res.jsonValue["ProcessorSummary"]["Count"]; |
| auto procCountPtr = |
| procCount.get_ptr<nlohmann::json::number_integer_t*>(); |
| if (procCountPtr != nullptr) |
| { |
| // shouldn't be possible to be nullptr |
| *procCountPtr += 1; |
| } |
| } |
| } |
| |
| /* |
| * @brief Update "ProcessorSummary" "Status" "State" based on |
| * CPU Functional State |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls |
| * @param[in] cpuFunctionalState is CPU functional true/false |
| * |
| * @return None. |
| */ |
| inline void |
| modifyCpuFunctionalState(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::variant<bool>& cpuFunctionalState) |
| { |
| const bool* isCpuFunctional = std::get_if<bool>(&cpuFunctionalState); |
| |
| if (isCpuFunctional == nullptr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Cpu Functional: " << *isCpuFunctional; |
| |
| nlohmann::json& prevProcState = |
| aResp->res.jsonValue["ProcessorSummary"]["Status"]["State"]; |
| |
| // Set it as Enabled if at least one CPU is functional |
| // Update STATE only if previous State was Non_Functional and current CPU is |
| // Functional. |
| if (prevProcState == "Disabled") |
| { |
| if (*isCpuFunctional == true) |
| { |
| aResp->res.jsonValue["ProcessorSummary"]["Status"]["State"] = |
| "Enabled"; |
| } |
| } |
| } |
| |
| inline void getProcessorProperties( |
| const std::shared_ptr<bmcweb::AsyncResp>& aResp, const std::string& service, |
| const std::string& path, |
| const std::vector<std::pair< |
| std::string, std::variant<std::string, uint64_t, uint32_t, uint16_t>>>& |
| properties) |
| { |
| |
| BMCWEB_LOG_DEBUG << "Got " << properties.size() << " Cpu properties."; |
| |
| auto getCpuPresenceState = |
| [aResp](const boost::system::error_code ec3, |
| const std::variant<bool>& cpuPresenceCheck) { |
| if (ec3) |
| { |
| BMCWEB_LOG_ERROR << "DBUS response error " << ec3; |
| return; |
| } |
| modifyCpuPresenceState(aResp, cpuPresenceCheck); |
| }; |
| |
| auto getCpuFunctionalState = |
| [aResp](const boost::system::error_code ec3, |
| const std::variant<bool>& cpuFunctionalCheck) { |
| if (ec3) |
| { |
| BMCWEB_LOG_ERROR << "DBUS response error " << ec3; |
| return; |
| } |
| modifyCpuFunctionalState(aResp, cpuFunctionalCheck); |
| }; |
| |
| // Get the Presence of CPU |
| crow::connections::systemBus->async_method_call( |
| std::move(getCpuPresenceState), service, path, |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Inventory.Item", "Present"); |
| |
| // Get the Functional State |
| crow::connections::systemBus->async_method_call( |
| std::move(getCpuFunctionalState), service, path, |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.State.Decorator.OperationalStatus", "Functional"); |
| |
| for (const auto& property : properties) |
| { |
| |
| // TODO: Get Model |
| |
| // Get CoreCount |
| if (property.first == "CoreCount") |
| { |
| |
| // Get CPU CoreCount and add it to the total |
| const uint16_t* coreCountVal = |
| std::get_if<uint16_t>(&property.second); |
| |
| if (!coreCountVal) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| nlohmann::json& coreCount = |
| aResp->res.jsonValue["ProcessorSummary"]["CoreCount"]; |
| uint64_t* coreCountPtr = coreCount.get_ptr<uint64_t*>(); |
| |
| if (coreCountPtr == nullptr) |
| { |
| coreCount = 0; |
| } |
| else |
| { |
| *coreCountPtr += *coreCountVal; |
| } |
| } |
| } |
| } |
| |
| /* |
| * @brief Get ProcessorSummary fields |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls |
| * @param[in] service dbus service for Cpu Information |
| * @param[in] path dbus path for Cpu |
| * |
| * @return None. |
| */ |
| inline void getProcessorSummary(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& service, |
| const std::string& path) |
| { |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp, service, |
| path](const boost::system::error_code ec2, |
| const std::vector<std::pair< |
| std::string, std::variant<std::string, uint64_t, uint32_t, |
| uint16_t>>>& properties) { |
| if (ec2) |
| { |
| BMCWEB_LOG_ERROR << "DBUS response error " << ec2; |
| messages::internalError(aResp->res); |
| return; |
| } |
| getProcessorProperties(aResp, service, path, properties); |
| }, |
| service, path, "org.freedesktop.DBus.Properties", "GetAll", |
| "xyz.openbmc_project.Inventory.Item.Cpu"); |
| } |
| |
| /* |
| * @brief Retrieves computer system properties over dbus |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls |
| * @param[in] systemHealth Shared HealthPopulate pointer |
| * |
| * @return None. |
| */ |
| inline void |
| getComputerSystem(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::shared_ptr<HealthPopulate>& systemHealth) |
| { |
| BMCWEB_LOG_DEBUG << "Get available system components."; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp, systemHealth]( |
| const boost::system::error_code ec, |
| const std::vector<std::pair< |
| std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>>& |
| subtree) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| // Iterate over all retrieved ObjectPaths. |
| for (const std::pair<std::string, |
| std::vector<std::pair< |
| std::string, std::vector<std::string>>>>& |
| object : subtree) |
| { |
| const std::string& path = object.first; |
| BMCWEB_LOG_DEBUG << "Got path: " << path; |
| const std::vector< |
| std::pair<std::string, std::vector<std::string>>>& |
| connectionNames = object.second; |
| if (connectionNames.size() < 1) |
| { |
| continue; |
| } |
| |
| auto memoryHealth = std::make_shared<HealthPopulate>( |
| aResp, aResp->res.jsonValue["MemorySummary"]["Status"]); |
| |
| auto cpuHealth = std::make_shared<HealthPopulate>( |
| aResp, aResp->res.jsonValue["ProcessorSummary"]["Status"]); |
| |
| systemHealth->children.emplace_back(memoryHealth); |
| systemHealth->children.emplace_back(cpuHealth); |
| |
| // This is not system, so check if it's cpu, dimm, UUID or |
| // BiosVer |
| for (const auto& connection : connectionNames) |
| { |
| for (const auto& interfaceName : connection.second) |
| { |
| if (interfaceName == |
| "xyz.openbmc_project.Inventory.Item.Dimm") |
| { |
| BMCWEB_LOG_DEBUG |
| << "Found Dimm, now get its properties."; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp, service{connection.first}, |
| path](const boost::system::error_code ec2, |
| const std::vector< |
| std::pair<std::string, VariantType>>& |
| properties) { |
| if (ec2) |
| { |
| BMCWEB_LOG_ERROR |
| << "DBUS response error " << ec2; |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Got " |
| << properties.size() |
| << " Dimm properties."; |
| |
| if (properties.size() > 0) |
| { |
| for (const std::pair<std::string, |
| VariantType>& |
| property : properties) |
| { |
| if (property.first != |
| "MemorySizeInKB") |
| { |
| continue; |
| } |
| const uint32_t* value = |
| std::get_if<uint32_t>( |
| &property.second); |
| if (value == nullptr) |
| { |
| BMCWEB_LOG_DEBUG |
| << "Find incorrect type of " |
| "MemorySize"; |
| continue; |
| } |
| nlohmann::json& totalMemory = |
| aResp->res |
| .jsonValue["MemorySummar" |
| "y"] |
| ["TotalSystemMe" |
| "moryGiB"]; |
| uint64_t* preValue = |
| totalMemory |
| .get_ptr<uint64_t*>(); |
| if (preValue == nullptr) |
| { |
| continue; |
| } |
| aResp->res |
| .jsonValue["MemorySummary"] |
| ["TotalSystemMemoryGi" |
| "B"] = |
| *value / (1024 * 1024) + |
| *preValue; |
| aResp->res |
| .jsonValue["MemorySummary"] |
| ["Status"]["State"] = |
| "Enabled"; |
| } |
| } |
| else |
| { |
| auto getDimmProperties = |
| [aResp]( |
| const boost::system::error_code |
| ec3, |
| const std::variant<bool>& |
| dimmState) { |
| if (ec3) |
| { |
| BMCWEB_LOG_ERROR |
| << "DBUS response " |
| "error " |
| << ec3; |
| return; |
| } |
| updateDimmProperties(aResp, |
| dimmState); |
| }; |
| crow::connections::systemBus |
| ->async_method_call( |
| std::move(getDimmProperties), |
| service, path, |
| "org.freedesktop.DBus." |
| "Properties", |
| "Get", |
| "xyz.openbmc_project.State." |
| "Decorator.OperationalStatus", |
| "Functional"); |
| } |
| }, |
| connection.first, path, |
| "org.freedesktop.DBus.Properties", "GetAll", |
| "xyz.openbmc_project.Inventory.Item.Dimm"); |
| |
| memoryHealth->inventory.emplace_back(path); |
| } |
| else if (interfaceName == |
| "xyz.openbmc_project.Inventory.Item.Cpu") |
| { |
| BMCWEB_LOG_DEBUG |
| << "Found Cpu, now get its properties."; |
| |
| getProcessorSummary(aResp, connection.first, path); |
| |
| cpuHealth->inventory.emplace_back(path); |
| } |
| else if (interfaceName == |
| "xyz.openbmc_project.Common.UUID") |
| { |
| BMCWEB_LOG_DEBUG |
| << "Found UUID, now get its properties."; |
| crow::connections::systemBus->async_method_call( |
| [aResp]( |
| const boost::system::error_code ec3, |
| const std::vector< |
| std::pair<std::string, VariantType>>& |
| properties) { |
| if (ec3) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response error " << ec3; |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Got " |
| << properties.size() |
| << " UUID properties."; |
| for (const std::pair<std::string, |
| VariantType>& |
| property : properties) |
| { |
| if (property.first == "UUID") |
| { |
| const std::string* value = |
| std::get_if<std::string>( |
| &property.second); |
| |
| if (value != nullptr) |
| { |
| std::string valueStr = *value; |
| if (valueStr.size() == 32) |
| { |
| valueStr.insert(8, 1, '-'); |
| valueStr.insert(13, 1, '-'); |
| valueStr.insert(18, 1, '-'); |
| valueStr.insert(23, 1, '-'); |
| } |
| BMCWEB_LOG_DEBUG << "UUID = " |
| << valueStr; |
| aResp->res.jsonValue["UUID"] = |
| valueStr; |
| } |
| } |
| } |
| }, |
| connection.first, path, |
| "org.freedesktop.DBus.Properties", "GetAll", |
| "xyz.openbmc_project.Common.UUID"); |
| } |
| else if (interfaceName == |
| "xyz.openbmc_project.Inventory.Item.System") |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp]( |
| const boost::system::error_code ec2, |
| const std::vector< |
| std::pair<std::string, VariantType>>& |
| propertiesList) { |
| if (ec2) |
| { |
| // doesn't have to include this |
| // interface |
| return; |
| } |
| BMCWEB_LOG_DEBUG |
| << "Got " << propertiesList.size() |
| << " properties for system"; |
| for (const std::pair<std::string, |
| VariantType>& |
| property : propertiesList) |
| { |
| const std::string& propertyName = |
| property.first; |
| if ((propertyName == "PartNumber") || |
| (propertyName == "SerialNumber") || |
| (propertyName == "Manufacturer") || |
| (propertyName == "Model") || |
| (propertyName == "SubModel")) |
| { |
| const std::string* value = |
| std::get_if<std::string>( |
| &property.second); |
| if (value != nullptr) |
| { |
| aResp->res |
| .jsonValue[propertyName] = |
| *value; |
| } |
| } |
| } |
| |
| // Grab the bios version |
| fw_util::populateFirmwareInformation( |
| aResp, fw_util::biosPurpose, |
| "BiosVersion", false); |
| }, |
| connection.first, path, |
| "org.freedesktop.DBus.Properties", "GetAll", |
| "xyz.openbmc_project.Inventory.Decorator." |
| "Asset"); |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp]( |
| const boost::system::error_code ec2, |
| const std::variant<std::string>& property) { |
| if (ec2) |
| { |
| // doesn't have to include this |
| // interface |
| return; |
| } |
| |
| const std::string* value = |
| std::get_if<std::string>(&property); |
| if (value != nullptr) |
| { |
| aResp->res.jsonValue["AssetTag"] = |
| *value; |
| } |
| }, |
| connection.first, path, |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Inventory.Decorator." |
| "AssetTag", |
| "AssetTag"); |
| } |
| } |
| } |
| } |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree", |
| "/xyz/openbmc_project/inventory", int32_t(0), |
| std::array<const char*, 5>{ |
| "xyz.openbmc_project.Inventory.Decorator.Asset", |
| "xyz.openbmc_project.Inventory.Item.Cpu", |
| "xyz.openbmc_project.Inventory.Item.Dimm", |
| "xyz.openbmc_project.Inventory.Item.System", |
| "xyz.openbmc_project.Common.UUID", |
| }); |
| } |
| |
| /** |
| * @brief Retrieves host state properties over dbus |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls. |
| * |
| * @return None. |
| */ |
| inline void getHostState(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get host information."; |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<std::string>& hostState) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const std::string* s = std::get_if<std::string>(&hostState); |
| BMCWEB_LOG_DEBUG << "Host state: " << *s; |
| if (s != nullptr) |
| { |
| // Verify Host State |
| if (*s == "xyz.openbmc_project.State.Host.HostState.Running") |
| { |
| aResp->res.jsonValue["PowerState"] = "On"; |
| aResp->res.jsonValue["Status"]["State"] = "Enabled"; |
| } |
| else if (*s == "xyz.openbmc_project.State.Host.HostState." |
| "Quiesced") |
| { |
| aResp->res.jsonValue["PowerState"] = "On"; |
| aResp->res.jsonValue["Status"]["State"] = "Quiesced"; |
| } |
| else if (*s == "xyz.openbmc_project.State.Host.HostState." |
| "DiagnosticMode") |
| { |
| aResp->res.jsonValue["PowerState"] = "On"; |
| aResp->res.jsonValue["Status"]["State"] = "InTest"; |
| } |
| else if (*s == "xyz.openbmc_project.State.Host.HostState." |
| "TransitioningToRunning") |
| { |
| aResp->res.jsonValue["PowerState"] = "PoweringOn"; |
| aResp->res.jsonValue["Status"]["State"] = "Starting"; |
| } |
| else if (*s == "xyz.openbmc_project.State.Host.HostState." |
| "TransitioningToOff") |
| { |
| aResp->res.jsonValue["PowerState"] = "PoweringOff"; |
| aResp->res.jsonValue["Status"]["State"] = "Disabled"; |
| } |
| else |
| { |
| aResp->res.jsonValue["PowerState"] = "Off"; |
| aResp->res.jsonValue["Status"]["State"] = "Disabled"; |
| } |
| } |
| }, |
| "xyz.openbmc_project.State.Host", "/xyz/openbmc_project/state/host0", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.State.Host", "CurrentHostState"); |
| } |
| |
| /** |
| * @brief Translates boot source DBUS property value to redfish. |
| * |
| * @param[in] dbusSource The boot source in DBUS speak. |
| * |
| * @return Returns as a string, the boot source in Redfish terms. If translation |
| * cannot be done, returns an empty string. |
| */ |
| inline std::string dbusToRfBootSource(const std::string& dbusSource) |
| { |
| if (dbusSource == "xyz.openbmc_project.Control.Boot.Source.Sources.Default") |
| { |
| return "None"; |
| } |
| if (dbusSource == "xyz.openbmc_project.Control.Boot.Source.Sources.Disk") |
| { |
| return "Hdd"; |
| } |
| if (dbusSource == |
| "xyz.openbmc_project.Control.Boot.Source.Sources.ExternalMedia") |
| { |
| return "Cd"; |
| } |
| if (dbusSource == "xyz.openbmc_project.Control.Boot.Source.Sources.Network") |
| { |
| return "Pxe"; |
| } |
| if (dbusSource == |
| "xyz.openbmc_project.Control.Boot.Source.Sources.RemovableMedia") |
| { |
| return "Usb"; |
| } |
| return ""; |
| } |
| |
| /** |
| * @brief Translates boot type DBUS property value to redfish. |
| * |
| * @param[in] dbusType The boot type in DBUS speak. |
| * |
| * @return Returns as a string, the boot type in Redfish terms. If translation |
| * cannot be done, returns an empty string. |
| */ |
| inline std::string dbusToRfBootType(const std::string& dbusType) |
| { |
| if (dbusType == "xyz.openbmc_project.Control.Boot.Type.Types.Legacy") |
| { |
| return "Legacy"; |
| } |
| if (dbusType == "xyz.openbmc_project.Control.Boot.Type.Types.EFI") |
| { |
| return "UEFI"; |
| } |
| return ""; |
| } |
| |
| /** |
| * @brief Translates boot mode DBUS property value to redfish. |
| * |
| * @param[in] dbusMode The boot mode in DBUS speak. |
| * |
| * @return Returns as a string, the boot mode in Redfish terms. If translation |
| * cannot be done, returns an empty string. |
| */ |
| inline std::string dbusToRfBootMode(const std::string& dbusMode) |
| { |
| if (dbusMode == "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular") |
| { |
| return "None"; |
| } |
| if (dbusMode == "xyz.openbmc_project.Control.Boot.Mode.Modes.Safe") |
| { |
| return "Diags"; |
| } |
| if (dbusMode == "xyz.openbmc_project.Control.Boot.Mode.Modes.Setup") |
| { |
| return "BiosSetup"; |
| } |
| return ""; |
| } |
| |
| /** |
| * @brief Translates boot source from Redfish to the DBus boot paths. |
| * |
| * @param[in] rfSource The boot source in Redfish. |
| * @param[out] bootSource The DBus source |
| * @param[out] bootMode the DBus boot mode |
| * |
| * @return Integer error code. |
| */ |
| inline int assignBootParameters(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& rfSource, |
| std::string& bootSource, std::string& bootMode) |
| { |
| bootSource = "xyz.openbmc_project.Control.Boot.Source.Sources.Default"; |
| bootMode = "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular"; |
| |
| if (rfSource == "None") |
| { |
| return 0; |
| } |
| if (rfSource == "Pxe") |
| { |
| bootSource = "xyz.openbmc_project.Control.Boot.Source.Sources.Network"; |
| } |
| else if (rfSource == "Hdd") |
| { |
| bootSource = "xyz.openbmc_project.Control.Boot.Source.Sources.Disk"; |
| } |
| else if (rfSource == "Diags") |
| { |
| bootMode = "xyz.openbmc_project.Control.Boot.Mode.Modes.Safe"; |
| } |
| else if (rfSource == "Cd") |
| { |
| bootSource = |
| "xyz.openbmc_project.Control.Boot.Source.Sources.ExternalMedia"; |
| } |
| else if (rfSource == "BiosSetup") |
| { |
| bootMode = "xyz.openbmc_project.Control.Boot.Mode.Modes.Setup"; |
| } |
| else if (rfSource == "Usb") |
| { |
| bootSource = |
| "xyz.openbmc_project.Control.Boot.Source.Sources.RemovableMedia"; |
| } |
| else |
| { |
| BMCWEB_LOG_DEBUG << "Invalid property value for " |
| "BootSourceOverrideTarget: " |
| << bootSource; |
| messages::propertyValueNotInList(aResp->res, rfSource, |
| "BootSourceTargetOverride"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /** |
| * @brief Retrieves boot progress of the system |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| inline void getBootProgress(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<std::string>& bootProgress) { |
| if (ec) |
| { |
| // BootProgress is an optional object so just do nothing if |
| // not found |
| return; |
| } |
| |
| const std::string* bootProgressStr = |
| std::get_if<std::string>(&bootProgress); |
| |
| if (!bootProgressStr) |
| { |
| // Interface implemented but property not found, return error |
| // for that |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Boot Progress: " << *bootProgressStr; |
| |
| // Now convert the D-Bus BootProgress to the appropriate Redfish |
| // enum |
| std::string rfBpLastState = "None"; |
| if (*bootProgressStr == "xyz.openbmc_project.State.Boot.Progress." |
| "ProgressStages.Unspecified") |
| { |
| rfBpLastState = "None"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "PrimaryProcInit") |
| { |
| rfBpLastState = "PrimaryProcessorInitializationStarted"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "BusInit") |
| { |
| rfBpLastState = "BusInitializationStarted"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "MemoryInit") |
| { |
| rfBpLastState = "MemoryInitializationStarted"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "SecondaryProcInit") |
| { |
| rfBpLastState = "SecondaryProcessorInitializationStarted"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "PCIInit") |
| { |
| rfBpLastState = "PCIResourceConfigStarted"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "SystemInitComplete") |
| { |
| rfBpLastState = "SystemHardwareInitializationComplete"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "OSStart") |
| { |
| rfBpLastState = "OSBootStarted"; |
| } |
| else if (*bootProgressStr == |
| "xyz.openbmc_project.State.Boot.Progress.ProgressStages." |
| "OSRunning") |
| { |
| rfBpLastState = "OSRunning"; |
| } |
| else |
| { |
| BMCWEB_LOG_DEBUG << "Unsupported D-Bus BootProgress " |
| << *bootProgressStr; |
| // Just return the default |
| } |
| |
| aResp->res.jsonValue["BootProgress"]["LastState"] = rfBpLastState; |
| }, |
| "xyz.openbmc_project.State.Host", "/xyz/openbmc_project/state/host0", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.State.Boot.Progress", "BootProgress"); |
| } |
| |
| /** |
| * @brief Retrieves boot override type over DBUS and fills out the response |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| |
| inline void getBootOverrideType(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<std::string>& bootType) { |
| if (ec) |
| { |
| // not an error, don't have to have the interface |
| return; |
| } |
| |
| const std::string* bootTypeStr = |
| std::get_if<std::string>(&bootType); |
| |
| if (!bootTypeStr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Boot type: " << *bootTypeStr; |
| |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideMode@Redfish." |
| "AllowableValues"] = {"Legacy", |
| "UEFI"}; |
| |
| auto rfType = dbusToRfBootType(*bootTypeStr); |
| if (rfType.empty()) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideMode"] = rfType; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.Boot.Type", "BootType"); |
| } |
| |
| /** |
| * @brief Retrieves boot override mode over DBUS and fills out the response |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| |
| inline void getBootOverrideMode(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<std::string>& bootMode) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const std::string* bootModeStr = |
| std::get_if<std::string>(&bootMode); |
| |
| if (!bootModeStr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Boot mode: " << *bootModeStr; |
| |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideTarget@Redfish." |
| "AllowableValues"] = { |
| "None", "Pxe", "Hdd", "Cd", "Diags", "BiosSetup", "Usb"}; |
| |
| if (*bootModeStr != |
| "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular") |
| { |
| auto rfMode = dbusToRfBootMode(*bootModeStr); |
| if (!rfMode.empty()) |
| { |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideTarget"] = |
| rfMode; |
| } |
| } |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.Boot.Mode", "BootMode"); |
| } |
| |
| /** |
| * @brief Retrieves boot override source over DBUS |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| |
| inline void |
| getBootOverrideSource(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<std::string>& bootSource) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const std::string* bootSourceStr = |
| std::get_if<std::string>(&bootSource); |
| |
| if (!bootSourceStr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Boot source: " << *bootSourceStr; |
| |
| auto rfSource = dbusToRfBootSource(*bootSourceStr); |
| if (!rfSource.empty()) |
| { |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideTarget"] = |
| rfSource; |
| } |
| |
| // Get BootMode as BootSourceOverrideTarget is constructed |
| // from both BootSource and BootMode |
| getBootOverrideMode(aResp); |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.Boot.Source", "BootSource"); |
| } |
| |
| /** |
| * @brief This functions abstracts all the logic behind getting a |
| * "BootSourceOverrideEnabled" property from an overall boot override enable |
| * state |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| |
| inline void |
| processBootOverrideEnable(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const bool bootOverrideEnableSetting) |
| { |
| if (!bootOverrideEnableSetting) |
| { |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideEnabled"] = "Disabled"; |
| return; |
| } |
| |
| // If boot source override is enabled, we need to check 'one_time' |
| // property to set a correct value for the "BootSourceOverrideEnabled" |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<bool>& oneTime) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const bool* oneTimePtr = std::get_if<bool>(&oneTime); |
| |
| if (!oneTimePtr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| bool oneTimeSetting = *oneTimePtr; |
| |
| if (oneTimeSetting) |
| { |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideEnabled"] = |
| "Once"; |
| } |
| else |
| { |
| aResp->res.jsonValue["Boot"]["BootSourceOverrideEnabled"] = |
| "Continuous"; |
| } |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot/one_time", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Object.Enable", "Enabled"); |
| } |
| |
| /** |
| * @brief Retrieves boot override enable over DBUS |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| |
| inline void |
| getBootOverrideEnable(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<bool>& bootOverrideEnable) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const bool* bootOverrideEnablePtr = |
| std::get_if<bool>(&bootOverrideEnable); |
| |
| if (!bootOverrideEnablePtr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| processBootOverrideEnable(aResp, *bootOverrideEnablePtr); |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Object.Enable", "Enabled"); |
| } |
| |
| /** |
| * @brief Retrieves boot source override properties |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| inline void getBootProperties(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get boot information."; |
| |
| getBootOverrideSource(aResp); |
| getBootOverrideType(aResp); |
| getBootOverrideEnable(aResp); |
| } |
| |
| /** |
| * @brief Retrieves the Last Reset Time |
| * |
| * "Reset" is an overloaded term in Redfish, "Reset" includes power on |
| * and power off. Even though this is the "system" Redfish object look at the |
| * chassis D-Bus interface for the LastStateChangeTime since this has the |
| * last power operation time. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| inline void getLastResetTime(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Getting System Last Reset Time"; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| std::variant<uint64_t>& lastResetTime) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "D-BUS response error " << ec; |
| return; |
| } |
| |
| const uint64_t* lastResetTimePtr = |
| std::get_if<uint64_t>(&lastResetTime); |
| |
| if (!lastResetTimePtr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| // LastStateChangeTime is epoch time, in milliseconds |
| // https://github.com/openbmc/phosphor-dbus-interfaces/blob/33e8e1dd64da53a66e888d33dc82001305cd0bf9/xyz/openbmc_project/State/Chassis.interface.yaml#L19 |
| time_t lastResetTimeStamp = |
| static_cast<time_t>(*lastResetTimePtr / 1000); |
| |
| // Convert to ISO 8601 standard |
| aResp->res.jsonValue["LastResetTime"] = |
| crow::utility::getDateTime(lastResetTimeStamp); |
| }, |
| "xyz.openbmc_project.State.Chassis", |
| "/xyz/openbmc_project/state/chassis0", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.State.Chassis", "LastStateChangeTime"); |
| } |
| |
| /** |
| * @brief Retrieves Automatic Retry properties. Known on D-Bus as AutoReboot. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| inline void getAutomaticRetry(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get Automatic Retry policy"; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| std::variant<bool>& autoRebootEnabled) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "D-BUS response error " << ec; |
| return; |
| } |
| |
| const bool* autoRebootEnabledPtr = |
| std::get_if<bool>(&autoRebootEnabled); |
| |
| if (!autoRebootEnabledPtr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Auto Reboot: " << *autoRebootEnabledPtr; |
| if (*autoRebootEnabledPtr == true) |
| { |
| aResp->res.jsonValue["Boot"]["AutomaticRetryConfig"] = |
| "RetryAttempts"; |
| // If AutomaticRetry (AutoReboot) is enabled see how many |
| // attempts are left |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec2, |
| std::variant<uint32_t>& autoRebootAttemptsLeft) { |
| if (ec2) |
| { |
| BMCWEB_LOG_DEBUG << "D-BUS response error " << ec2; |
| return; |
| } |
| |
| const uint32_t* autoRebootAttemptsLeftPtr = |
| std::get_if<uint32_t>(&autoRebootAttemptsLeft); |
| |
| if (!autoRebootAttemptsLeftPtr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Auto Reboot Attempts Left: " |
| << *autoRebootAttemptsLeftPtr; |
| |
| aResp->res |
| .jsonValue["Boot"] |
| ["RemainingAutomaticRetryAttempts"] = |
| *autoRebootAttemptsLeftPtr; |
| }, |
| "xyz.openbmc_project.State.Host", |
| "/xyz/openbmc_project/state/host0", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.Boot.RebootAttempts", |
| "AttemptsLeft"); |
| } |
| else |
| { |
| aResp->res.jsonValue["Boot"]["AutomaticRetryConfig"] = |
| "Disabled"; |
| } |
| |
| // Not on D-Bus. Hardcoded here: |
| // https://github.com/openbmc/phosphor-state-manager/blob/1dbbef42675e94fb1f78edb87d6b11380260535a/meson_options.txt#L71 |
| aResp->res.jsonValue["Boot"]["AutomaticRetryAttempts"] = 3; |
| |
| // "AutomaticRetryConfig" can be 3 values, Disabled, RetryAlways, |
| // and RetryAttempts. OpenBMC only supports Disabled and |
| // RetryAttempts. |
| aResp->res.jsonValue["Boot"]["AutomaticRetryConfig@Redfish." |
| "AllowableValues"] = {"Disabled", |
| "RetryAttempts"}; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/auto_reboot", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.Boot.RebootPolicy", "AutoReboot"); |
| } |
| |
| /** |
| * @brief Retrieves power restore policy over DBUS. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| inline void |
| getPowerRestorePolicy(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get power restore policy"; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| std::variant<std::string>& policy) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| return; |
| } |
| |
| const boost::container::flat_map<std::string, std::string> |
| policyMaps = { |
| {"xyz.openbmc_project.Control.Power.RestorePolicy.Policy." |
| "AlwaysOn", |
| "AlwaysOn"}, |
| {"xyz.openbmc_project.Control.Power.RestorePolicy.Policy." |
| "AlwaysOff", |
| "AlwaysOff"}, |
| {"xyz.openbmc_project.Control.Power.RestorePolicy.Policy." |
| "Restore", |
| "LastState"}}; |
| |
| const std::string* policyPtr = std::get_if<std::string>(&policy); |
| |
| if (!policyPtr) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| auto policyMapsIt = policyMaps.find(*policyPtr); |
| if (policyMapsIt == policyMaps.end()) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| aResp->res.jsonValue["PowerRestorePolicy"] = policyMapsIt->second; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/power_restore_policy", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.Power.RestorePolicy", |
| "PowerRestorePolicy"); |
| } |
| |
| /** |
| * @brief Get TrustedModuleRequiredToBoot property. Determines whether or not |
| * TPM is required for booting the host. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| inline void getTrustedModuleRequiredToBoot( |
| const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get TPM required to boot."; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp]( |
| const boost::system::error_code ec, |
| std::vector<std::pair< |
| std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>>& |
| subtree) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response error on TPM.Policy GetSubTree" << ec; |
| // This is an optional D-Bus object so just return if |
| // error occurs |
| return; |
| } |
| if (subtree.size() == 0) |
| { |
| // As noted above, this is an optional interface so just return |
| // if there is no instance found |
| return; |
| } |
| |
| /* When there is more than one TPMEnable object... */ |
| if (subtree.size() > 1) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response has more than 1 TPM Enable object:" |
| << subtree.size(); |
| // Throw an internal Error and return |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| // Make sure the Dbus response map has a service and objectPath |
| // field |
| if (subtree[0].first.empty() || subtree[0].second.size() != 1) |
| { |
| BMCWEB_LOG_DEBUG << "TPM.Policy mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const std::string& path = subtree[0].first; |
| const std::string& serv = subtree[0].second.begin()->first; |
| |
| // Valid TPM Enable object found, now reading the current value |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| std::variant<bool>& tpmRequired) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG |
| << "D-BUS response error on TPM.Policy Get" << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const bool* tpmRequiredVal = |
| std::get_if<bool>(&tpmRequired); |
| |
| if (!tpmRequiredVal) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| if (*tpmRequiredVal == true) |
| { |
| aResp->res |
| .jsonValue["Boot"]["TrustedModuleRequiredToBoot"] = |
| "Required"; |
| } |
| else |
| { |
| aResp->res |
| .jsonValue["Boot"]["TrustedModuleRequiredToBoot"] = |
| "Disabled"; |
| } |
| }, |
| serv, path, "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.TPM.Policy", "TPMEnable"); |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree", "/", int32_t(0), |
| std::array<const char*, 1>{"xyz.openbmc_project.Control.TPM.Policy"}); |
| } |
| |
| /** |
| * @brief Set TrustedModuleRequiredToBoot property. Determines whether or not |
| * TPM is required for booting the host. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] tpmRequired Value to set TPM Required To Boot property to. |
| * |
| * @return None. |
| */ |
| inline void setTrustedModuleRequiredToBoot( |
| const std::shared_ptr<bmcweb::AsyncResp>& aResp, const bool tpmRequired) |
| { |
| BMCWEB_LOG_DEBUG << "Set TrustedModuleRequiredToBoot."; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp, tpmRequired]( |
| const boost::system::error_code ec, |
| std::vector<std::pair< |
| std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>>& |
| subtree) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response error on TPM.Policy GetSubTree" << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| if (subtree.size() == 0) |
| { |
| messages::propertyValueNotInList(aResp->res, "ComputerSystem", |
| "TrustedModuleRequiredToBoot"); |
| return; |
| } |
| |
| /* When there is more than one TPMEnable object... */ |
| if (subtree.size() > 1) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response has more than 1 TPM Enable object:" |
| << subtree.size(); |
| // Throw an internal Error and return |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| // Make sure the Dbus response map has a service and objectPath |
| // field |
| if (subtree[0].first.empty() || subtree[0].second.size() != 1) |
| { |
| BMCWEB_LOG_DEBUG << "TPM.Policy mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const std::string& path = subtree[0].first; |
| const std::string& serv = subtree[0].second.begin()->first; |
| |
| if (serv.empty()) |
| { |
| BMCWEB_LOG_DEBUG << "TPM.Policy service mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| // Valid TPM Enable object found, now setting the value |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error: Set " |
| "TrustedModuleRequiredToBoot" |
| << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Set TrustedModuleRequiredToBoot done."; |
| }, |
| serv, path, "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.TPM.Policy", "TPMEnable", |
| std::variant<bool>(tpmRequired)); |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree", "/", int32_t(0), |
| std::array<const char*, 1>{"xyz.openbmc_project.Control.TPM.Policy"}); |
| } |
| |
| /** |
| * @brief Sets boot properties into DBUS object(s). |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] bootType The boot type to set. |
| * @return Integer error code. |
| */ |
| inline void setBootType(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::optional<std::string>& bootType) |
| { |
| std::string bootTypeStr; |
| |
| if (!bootType) |
| { |
| return; |
| } |
| |
| // Source target specified |
| BMCWEB_LOG_DEBUG << "Boot type: " << *bootType; |
| // Figure out which DBUS interface and property to use |
| if (*bootType == "Legacy") |
| { |
| bootTypeStr = "xyz.openbmc_project.Control.Boot.Type.Types.Legacy"; |
| } |
| else if (*bootType == "UEFI") |
| { |
| bootTypeStr = "xyz.openbmc_project.Control.Boot.Type.Types.EFI"; |
| } |
| else |
| { |
| BMCWEB_LOG_DEBUG << "Invalid property value for " |
| "BootSourceOverrideMode: " |
| << *bootType; |
| messages::propertyValueNotInList(aResp->res, *bootType, |
| "BootSourceOverrideMode"); |
| return; |
| } |
| |
| // Act on validated parameters |
| BMCWEB_LOG_DEBUG << "DBUS boot type: " << bootTypeStr; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| if (ec.value() == boost::asio::error::host_unreachable) |
| { |
| messages::resourceNotFound(aResp->res, "Set", "BootType"); |
| return; |
| } |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Boot type update done."; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.Boot.Type", "BootType", |
| std::variant<std::string>(bootTypeStr)); |
| } |
| |
| /** |
| * @brief Sets boot properties into DBUS object(s). |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] bootType The boot type to set. |
| * @return Integer error code. |
| */ |
| inline void setBootEnable(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::optional<std::string>& bootEnable) |
| { |
| if (!bootEnable) |
| { |
| return; |
| } |
| // Source target specified |
| BMCWEB_LOG_DEBUG << "Boot enable: " << *bootEnable; |
| |
| bool bootOverrideEnable = false; |
| bool bootOverridePersistent = false; |
| // Figure out which DBUS interface and property to use |
| if (*bootEnable == "Disabled") |
| { |
| bootOverrideEnable = false; |
| } |
| else if (*bootEnable == "Once") |
| { |
| bootOverrideEnable = true; |
| bootOverridePersistent = false; |
| } |
| else if (*bootEnable == "Continuous") |
| { |
| bootOverrideEnable = true; |
| bootOverridePersistent = true; |
| } |
| else |
| { |
| BMCWEB_LOG_DEBUG << "Invalid property value for " |
| "BootSourceOverrideEnabled: " |
| << *bootEnable; |
| messages::propertyValueNotInList(aResp->res, *bootEnable, |
| "BootSourceOverrideEnabled"); |
| return; |
| } |
| |
| // Act on validated parameters |
| BMCWEB_LOG_DEBUG << "DBUS boot override enable: " << bootOverrideEnable; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Boot override enable update done."; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Object.Enable", "Enabled", |
| std::variant<bool>(bootOverrideEnable)); |
| |
| if (!bootOverrideEnable) |
| { |
| return; |
| } |
| |
| // In case boot override is enabled we need to set correct value for the |
| // 'one_time' enable DBus interface |
| BMCWEB_LOG_DEBUG << "DBUS boot override persistent: " |
| << bootOverridePersistent; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Boot one_time update done."; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot/one_time", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Object.Enable", "Enabled", |
| std::variant<bool>(!bootOverridePersistent)); |
| } |
| |
| /** |
| * @brief Sets boot properties into DBUS object(s). |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] bootSource The boot source to set. |
| * |
| * @return Integer error code. |
| */ |
| inline void setBootModeOrSource(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::optional<std::string>& bootSource) |
| { |
| std::string bootSourceStr; |
| std::string bootModeStr; |
| |
| if (!bootSource) |
| { |
| return; |
| } |
| |
| // Source target specified |
| BMCWEB_LOG_DEBUG << "Boot source: " << *bootSource; |
| // Figure out which DBUS interface and property to use |
| if (assignBootParameters(aResp, *bootSource, bootSourceStr, bootModeStr)) |
| { |
| BMCWEB_LOG_DEBUG |
| << "Invalid property value for BootSourceOverrideTarget: " |
| << *bootSource; |
| messages::propertyValueNotInList(aResp->res, *bootSource, |
| "BootSourceTargetOverride"); |
| return; |
| } |
| |
| // Act on validated parameters |
| BMCWEB_LOG_DEBUG << "DBUS boot source: " << bootSourceStr; |
| BMCWEB_LOG_DEBUG << "DBUS boot mode: " << bootModeStr; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Boot source update done."; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.Boot.Source", "BootSource", |
| std::variant<std::string>(bootSourceStr)); |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| BMCWEB_LOG_DEBUG << "Boot mode update done."; |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/boot", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.Boot.Mode", "BootMode", |
| std::variant<std::string>(bootModeStr)); |
| } |
| |
| /** |
| * @brief Sets Boot source override properties. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] bootSource The boot source from incoming RF request. |
| * @param[in] bootType The boot type from incoming RF request. |
| * @param[in] bootEnable The boot override enable from incoming RF request. |
| * |
| * @return Integer error code. |
| */ |
| |
| inline void setBootProperties(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::optional<std::string>& bootSource, |
| const std::optional<std::string>& bootType, |
| const std::optional<std::string>& bootEnable) |
| { |
| BMCWEB_LOG_DEBUG << "Set boot information."; |
| |
| setBootModeOrSource(aResp, bootSource); |
| setBootType(aResp, bootType); |
| setBootEnable(aResp, bootEnable); |
| } |
| |
| /** |
| * @brief Sets AssetTag |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] assetTag "AssetTag" from request. |
| * |
| * @return None. |
| */ |
| inline void setAssetTag(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& assetTag) |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp, assetTag]( |
| const boost::system::error_code ec, |
| const std::vector<std::pair< |
| std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>>& |
| subtree) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "D-Bus response error on GetSubTree " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| if (subtree.size() == 0) |
| { |
| BMCWEB_LOG_DEBUG << "Can't find system D-Bus object!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| // Assume only 1 system D-Bus object |
| // Throw an error if there is more than 1 |
| if (subtree.size() > 1) |
| { |
| BMCWEB_LOG_DEBUG << "Found more than 1 system D-Bus object!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| if (subtree[0].first.empty() || subtree[0].second.size() != 1) |
| { |
| BMCWEB_LOG_DEBUG << "Asset Tag Set mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const std::string& path = subtree[0].first; |
| const std::string& service = subtree[0].second.begin()->first; |
| |
| if (service.empty()) |
| { |
| BMCWEB_LOG_DEBUG << "Asset Tag Set service mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec2) { |
| if (ec2) |
| { |
| BMCWEB_LOG_DEBUG |
| << "D-Bus response error on AssetTag Set " << ec2; |
| messages::internalError(aResp->res); |
| return; |
| } |
| }, |
| service, path, "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Inventory.Decorator.AssetTag", "AssetTag", |
| std::variant<std::string>(assetTag)); |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree", |
| "/xyz/openbmc_project/inventory", int32_t(0), |
| std::array<const char*, 1>{ |
| "xyz.openbmc_project.Inventory.Item.System"}); |
| } |
| |
| /** |
| * @brief Sets automaticRetry (Auto Reboot) |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] automaticRetryConfig "AutomaticRetryConfig" from request. |
| * |
| * @return None. |
| */ |
| inline void setAutomaticRetry(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& automaticRetryConfig) |
| { |
| BMCWEB_LOG_DEBUG << "Set Automatic Retry."; |
| |
| // OpenBMC only supports "Disabled" and "RetryAttempts". |
| bool autoRebootEnabled; |
| |
| if (automaticRetryConfig == "Disabled") |
| { |
| autoRebootEnabled = false; |
| } |
| else if (automaticRetryConfig == "RetryAttempts") |
| { |
| autoRebootEnabled = true; |
| } |
| else |
| { |
| BMCWEB_LOG_DEBUG << "Invalid property value for " |
| "AutomaticRetryConfig: " |
| << automaticRetryConfig; |
| messages::propertyValueNotInList(aResp->res, automaticRetryConfig, |
| "AutomaticRetryConfig"); |
| return; |
| } |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/auto_reboot", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.Boot.RebootPolicy", "AutoReboot", |
| std::variant<bool>(autoRebootEnabled)); |
| } |
| |
| /** |
| * @brief Sets power restore policy properties. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] policy power restore policy properties from request. |
| * |
| * @return None. |
| */ |
| inline void |
| setPowerRestorePolicy(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& policy) |
| { |
| BMCWEB_LOG_DEBUG << "Set power restore policy."; |
| |
| const boost::container::flat_map<std::string, std::string> policyMaps = { |
| {"AlwaysOn", "xyz.openbmc_project.Control.Power.RestorePolicy.Policy." |
| "AlwaysOn"}, |
| {"AlwaysOff", "xyz.openbmc_project.Control.Power.RestorePolicy.Policy." |
| "AlwaysOff"}, |
| {"LastState", "xyz.openbmc_project.Control.Power.RestorePolicy.Policy." |
| "Restore"}}; |
| |
| std::string powerRestorPolicy; |
| |
| auto policyMapsIt = policyMaps.find(policy); |
| if (policyMapsIt == policyMaps.end()) |
| { |
| messages::propertyValueNotInList(aResp->res, policy, |
| "PowerRestorePolicy"); |
| return; |
| } |
| |
| powerRestorPolicy = policyMapsIt->second; |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/host0/power_restore_policy", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.Power.RestorePolicy", "PowerRestorePolicy", |
| std::variant<std::string>(powerRestorPolicy)); |
| } |
| |
| #ifdef BMCWEB_ENABLE_REDFISH_PROVISIONING_FEATURE |
| /** |
| * @brief Retrieves provisioning status |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls. |
| * |
| * @return None. |
| */ |
| inline void getProvisioningStatus(std::shared_ptr<bmcweb::AsyncResp> aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get OEM information."; |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::vector<std::pair<std::string, VariantType>>& |
| propertiesList) { |
| nlohmann::json& oemPFR = |
| aResp->res.jsonValue["Oem"]["OpenBmc"]["FirmwareProvisioning"]; |
| aResp->res.jsonValue["Oem"]["OpenBmc"]["@odata.type"] = |
| "#OemComputerSystem.OpenBmc"; |
| oemPFR["@odata.type"] = "#OemComputerSystem.FirmwareProvisioning"; |
| |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| // not an error, don't have to have the interface |
| oemPFR["ProvisioningStatus"] = "NotProvisioned"; |
| return; |
| } |
| |
| const bool* provState = nullptr; |
| const bool* lockState = nullptr; |
| for (const std::pair<std::string, VariantType>& property : |
| propertiesList) |
| { |
| if (property.first == "UfmProvisioned") |
| { |
| provState = std::get_if<bool>(&property.second); |
| } |
| else if (property.first == "UfmLocked") |
| { |
| lockState = std::get_if<bool>(&property.second); |
| } |
| } |
| |
| if ((provState == nullptr) || (lockState == nullptr)) |
| { |
| BMCWEB_LOG_DEBUG << "Unable to get PFR attributes."; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| if (*provState == true) |
| { |
| if (*lockState == true) |
| { |
| oemPFR["ProvisioningStatus"] = "ProvisionedAndLocked"; |
| } |
| else |
| { |
| oemPFR["ProvisioningStatus"] = "ProvisionedButNotLocked"; |
| } |
| } |
| else |
| { |
| oemPFR["ProvisioningStatus"] = "NotProvisioned"; |
| } |
| }, |
| "xyz.openbmc_project.PFR.Manager", "/xyz/openbmc_project/pfr", |
| "org.freedesktop.DBus.Properties", "GetAll", |
| "xyz.openbmc_project.PFR.Attributes"); |
| } |
| #endif |
| |
| /** |
| * @brief Translate the PowerMode to a response message. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] modeValue PowerMode value to be translated |
| * |
| * @return None. |
| */ |
| inline void translatePowerMode(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& modeValue) |
| { |
| std::string modeString; |
| |
| if (modeValue == "xyz.openbmc_project.Control.Power.Mode." |
| "PowerMode.Static") |
| { |
| aResp->res.jsonValue["PowerMode"] = "Static"; |
| } |
| else if (modeValue == "xyz.openbmc_project.Control.Power.Mode." |
| "PowerMode.MaximumPerformance") |
| { |
| aResp->res.jsonValue["PowerMode"] = "MaximumPerformance"; |
| } |
| else if (modeValue == "xyz.openbmc_project.Control.Power.Mode." |
| "PowerMode.PowerSaving") |
| { |
| aResp->res.jsonValue["PowerMode"] = "PowerSaving"; |
| } |
| else if (modeValue == "xyz.openbmc_project.Control.Power.Mode." |
| "PowerMode.OEM") |
| { |
| aResp->res.jsonValue["PowerMode"] = "OEM"; |
| } |
| else |
| { |
| // Any other values would be invalid |
| BMCWEB_LOG_DEBUG << "PowerMode value was not valid: " << modeValue; |
| messages::internalError(aResp->res); |
| } |
| } |
| |
| /** |
| * @brief Retrieves system power mode |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * |
| * @return None. |
| */ |
| inline void getPowerMode(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get power mode."; |
| |
| // Get Power Mode object path: |
| crow::connections::systemBus->async_method_call( |
| [aResp]( |
| const boost::system::error_code ec, |
| const std::vector<std::pair< |
| std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>>& |
| subtree) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response error on Power.Mode GetSubTree " << ec; |
| // This is an optional D-Bus object so just return if |
| // error occurs |
| return; |
| } |
| if (subtree.empty()) |
| { |
| // As noted above, this is an optional interface so just return |
| // if there is no instance found |
| return; |
| } |
| if (subtree.size() > 1) |
| { |
| // More then one PowerMode object is not supported and is an |
| // error |
| BMCWEB_LOG_DEBUG |
| << "Found more than 1 system D-Bus Power.Mode objects: " |
| << subtree.size(); |
| messages::internalError(aResp->res); |
| return; |
| } |
| if ((subtree[0].first.empty()) || (subtree[0].second.size() != 1)) |
| { |
| BMCWEB_LOG_DEBUG << "Power.Mode mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| const std::string& path = subtree[0].first; |
| const std::string& service = subtree[0].second.begin()->first; |
| if (service.empty()) |
| { |
| BMCWEB_LOG_DEBUG << "Power.Mode service mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| // Valid Power Mode object found, now read the current value |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| const std::variant<std::string>& pmode) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response error on PowerMode Get: " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| const std::string* s = std::get_if<std::string>(&pmode); |
| if (s == nullptr) |
| { |
| BMCWEB_LOG_DEBUG << "Unable to get PowerMode value"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| aResp->res.jsonValue["PowerMode@Redfish.AllowableValues"] = |
| {"Static", "MaximumPerformance", "PowerSaving"}; |
| |
| BMCWEB_LOG_DEBUG << "Current power mode: " << *s; |
| translatePowerMode(aResp, *s); |
| }, |
| service, path, "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.Power.Mode", "PowerMode"); |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree", "/", int32_t(0), |
| std::array<const char*, 1>{"xyz.openbmc_project.Control.Power.Mode"}); |
| } |
| |
| /** |
| * @brief Validate the specified mode is valid and return the PowerMode |
| * name associated with that string |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] modeString String representing the desired PowerMode |
| * |
| * @return PowerMode value or empty string if mode is not valid |
| */ |
| inline std::string |
| validatePowerMode(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& modeString) |
| { |
| std::string mode; |
| |
| if (modeString == "Static") |
| { |
| mode = "xyz.openbmc_project.Control.Power.Mode.PowerMode.Static"; |
| } |
| else if (modeString == "MaximumPerformance") |
| { |
| mode = "xyz.openbmc_project.Control.Power.Mode.PowerMode." |
| "MaximumPerformance"; |
| } |
| else if (modeString == "PowerSaving") |
| { |
| mode = "xyz.openbmc_project.Control.Power.Mode.PowerMode.PowerSaving"; |
| } |
| else |
| { |
| messages::propertyValueNotInList(aResp->res, modeString, "PowerMode"); |
| } |
| return mode; |
| } |
| |
| /** |
| * @brief Sets system power mode. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] pmode System power mode from request. |
| * |
| * @return None. |
| */ |
| inline void setPowerMode(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::string& pmode) |
| { |
| BMCWEB_LOG_DEBUG << "Set power mode."; |
| |
| std::string powerMode = validatePowerMode(aResp, pmode); |
| if (powerMode.empty()) |
| { |
| return; |
| } |
| |
| // Get Power Mode object path: |
| crow::connections::systemBus->async_method_call( |
| [aResp, powerMode]( |
| const boost::system::error_code ec, |
| const std::vector<std::pair< |
| std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>>& |
| subtree) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG |
| << "DBUS response error on Power.Mode GetSubTree " << ec; |
| // This is an optional D-Bus object, but user attempted to patch |
| messages::internalError(aResp->res); |
| return; |
| } |
| if (subtree.empty()) |
| { |
| // This is an optional D-Bus object, but user attempted to patch |
| messages::resourceNotFound(aResp->res, "ComputerSystem", |
| "PowerMode"); |
| return; |
| } |
| if (subtree.size() > 1) |
| { |
| // More then one PowerMode object is not supported and is an |
| // error |
| BMCWEB_LOG_DEBUG |
| << "Found more than 1 system D-Bus Power.Mode objects: " |
| << subtree.size(); |
| messages::internalError(aResp->res); |
| return; |
| } |
| if ((subtree[0].first.empty()) || (subtree[0].second.size() != 1)) |
| { |
| BMCWEB_LOG_DEBUG << "Power.Mode mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| const std::string& path = subtree[0].first; |
| const std::string& service = subtree[0].second.begin()->first; |
| if (service.empty()) |
| { |
| BMCWEB_LOG_DEBUG << "Power.Mode service mapper error!"; |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Setting power mode(" << powerMode << ") -> " |
| << path; |
| |
| // Set the Power Mode property |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| }, |
| service, path, "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.Power.Mode", "PowerMode", |
| std::variant<std::string>(powerMode)); |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree", "/", int32_t(0), |
| std::array<const char*, 1>{"xyz.openbmc_project.Control.Power.Mode"}); |
| } |
| |
| /** |
| * @brief Translates watchdog timeout action DBUS property value to redfish. |
| * |
| * @param[in] dbusAction The watchdog timeout action in D-BUS. |
| * |
| * @return Returns as a string, the timeout action in Redfish terms. If |
| * translation cannot be done, returns an empty string. |
| */ |
| inline std::string dbusToRfWatchdogAction(const std::string& dbusAction) |
| { |
| if (dbusAction == "xyz.openbmc_project.State.Watchdog.Action.None") |
| { |
| return "None"; |
| } |
| if (dbusAction == "xyz.openbmc_project.State.Watchdog.Action.HardReset") |
| { |
| return "ResetSystem"; |
| } |
| if (dbusAction == "xyz.openbmc_project.State.Watchdog.Action.PowerOff") |
| { |
| return "PowerDown"; |
| } |
| if (dbusAction == "xyz.openbmc_project.State.Watchdog.Action.PowerCycle") |
| { |
| return "PowerCycle"; |
| } |
| |
| return ""; |
| } |
| |
| /** |
| *@brief Translates timeout action from Redfish to DBUS property value. |
| * |
| *@param[in] rfAction The timeout action in Redfish. |
| * |
| *@return Returns as a string, the time_out action as expected by DBUS. |
| *If translation cannot be done, returns an empty string. |
| */ |
| |
| inline std::string rfToDbusWDTTimeOutAct(const std::string& rfAction) |
| { |
| if (rfAction == "None") |
| { |
| return "xyz.openbmc_project.State.Watchdog.Action.None"; |
| } |
| if (rfAction == "PowerCycle") |
| { |
| return "xyz.openbmc_project.State.Watchdog.Action.PowerCycle"; |
| } |
| if (rfAction == "PowerDown") |
| { |
| return "xyz.openbmc_project.State.Watchdog.Action.PowerOff"; |
| } |
| if (rfAction == "ResetSystem") |
| { |
| return "xyz.openbmc_project.State.Watchdog.Action.HardReset"; |
| } |
| |
| return ""; |
| } |
| |
| /** |
| * @brief Retrieves host watchdog timer properties over DBUS |
| * |
| * @param[in] aResp Shared pointer for completing asynchronous calls. |
| * |
| * @return None. |
| */ |
| inline void |
| getHostWatchdogTimer(const std::shared_ptr<bmcweb::AsyncResp>& aResp) |
| { |
| BMCWEB_LOG_DEBUG << "Get host watchodg"; |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec, |
| PropertiesType& properties) { |
| if (ec) |
| { |
| // watchdog service is stopped |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Got " << properties.size() << " wdt prop."; |
| |
| nlohmann::json& hostWatchdogTimer = |
| aResp->res.jsonValue["HostWatchdogTimer"]; |
| |
| // watchdog service is running/enabled |
| hostWatchdogTimer["Status"]["State"] = "Enabled"; |
| |
| for (const auto& property : properties) |
| { |
| BMCWEB_LOG_DEBUG << "prop=" << property.first; |
| if (property.first == "Enabled") |
| { |
| const bool* state = std::get_if<bool>(&property.second); |
| |
| if (!state) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| hostWatchdogTimer["FunctionEnabled"] = *state; |
| } |
| else if (property.first == "ExpireAction") |
| { |
| const std::string* s = |
| std::get_if<std::string>(&property.second); |
| if (!s) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| |
| std::string action = dbusToRfWatchdogAction(*s); |
| if (action.empty()) |
| { |
| messages::internalError(aResp->res); |
| return; |
| } |
| hostWatchdogTimer["TimeoutAction"] = action; |
| } |
| } |
| }, |
| "xyz.openbmc_project.Watchdog", "/xyz/openbmc_project/watchdog/host0", |
| "org.freedesktop.DBus.Properties", "GetAll", |
| "xyz.openbmc_project.State.Watchdog"); |
| } |
| |
| /** |
| * @brief Sets Host WatchDog Timer properties. |
| * |
| * @param[in] aResp Shared pointer for generating response message. |
| * @param[in] wdtEnable The WDTimer Enable value (true/false) from incoming |
| * RF request. |
| * @param[in] wdtTimeOutAction The WDT Timeout action, from incoming RF request. |
| * |
| * @return None. |
| */ |
| inline void setWDTProperties(const std::shared_ptr<bmcweb::AsyncResp>& aResp, |
| const std::optional<bool> wdtEnable, |
| const std::optional<std::string>& wdtTimeOutAction) |
| { |
| BMCWEB_LOG_DEBUG << "Set host watchdog"; |
| |
| if (wdtTimeOutAction) |
| { |
| std::string wdtTimeOutActStr = rfToDbusWDTTimeOutAct(*wdtTimeOutAction); |
| // check if TimeOut Action is Valid |
| if (wdtTimeOutActStr.empty()) |
| { |
| BMCWEB_LOG_DEBUG << "Unsupported value for TimeoutAction: " |
| << *wdtTimeOutAction; |
| messages::propertyValueNotInList(aResp->res, *wdtTimeOutAction, |
| "TimeoutAction"); |
| return; |
| } |
| |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Watchdog", |
| "/xyz/openbmc_project/watchdog/host0", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.State.Watchdog", "ExpireAction", |
| std::variant<std::string>(wdtTimeOutActStr)); |
| } |
| |
| if (wdtEnable) |
| { |
| crow::connections::systemBus->async_method_call( |
| [aResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_DEBUG << "DBUS response error " << ec; |
| messages::internalError(aResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Watchdog", |
| "/xyz/openbmc_project/watchdog/host0", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.State.Watchdog", "Enabled", |
| std::variant<bool>(*wdtEnable)); |
| } |
| } |
| |
| /** |
| * SystemsCollection derived class for delivering ComputerSystems Collection |
| * Schema |
| */ |
| inline void requestRoutesSystemsCollection(App& app) |
| { |
| BMCWEB_ROUTE(app, "/redfish/v1/Systems/") |
| .privileges(redfish::privileges::getComputerSystemCollection) |
| .methods(boost::beast::http::verb::get)( |
| [](const crow::Request& /*req*/, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) { |
| asyncResp->res.jsonValue["@odata.type"] = |
| "#ComputerSystemCollection.ComputerSystemCollection"; |
| asyncResp->res.jsonValue["@odata.id"] = "/redfish/v1/Systems"; |
| asyncResp->res.jsonValue["Name"] = "Computer System Collection"; |
| |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec, |
| const std::variant<std::string>& /*hostName*/) { |
| nlohmann::json& ifaceArray = |
| asyncResp->res.jsonValue["Members"]; |
| ifaceArray = nlohmann::json::array(); |
| auto& count = |
| asyncResp->res.jsonValue["Members@odata.count"]; |
| ifaceArray.push_back( |
| {{"@odata.id", "/redfish/v1/Systems/system"}}); |
| count = ifaceArray.size(); |
| if (!ec) |
| { |
| BMCWEB_LOG_DEBUG << "Hypervisor is available"; |
| ifaceArray.push_back( |
| {{"@odata.id", |
| "/redfish/v1/Systems/hypervisor"}}); |
| count = ifaceArray.size(); |
| } |
| }, |
| "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/network/hypervisor", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Network.SystemConfiguration", |
| "HostName"); |
| }); |
| } |
| |
| /** |
| * Function transceives data with dbus directly. |
| */ |
| inline void doNMI(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| constexpr char const* serviceName = "xyz.openbmc_project.Control.Host.NMI"; |
| constexpr char const* objectPath = "/xyz/openbmc_project/control/host0/nmi"; |
| constexpr char const* interfaceName = |
| "xyz.openbmc_project.Control.Host.NMI"; |
| constexpr char const* method = "NMI"; |
| |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_ERROR << " Bad D-Bus request error: " << ec; |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| messages::success(asyncResp->res); |
| }, |
| serviceName, objectPath, interfaceName, method); |
| } |
| |
| /** |
| * SystemActionsReset class supports handle POST method for Reset action. |
| * The class retrieves and sends data directly to D-Bus. |
| */ |
| inline void requestRoutesSystemActionsReset(App& app) |
| { |
| /** |
| * Function handles POST method request. |
| * Analyzes POST body message before sends Reset request data to D-Bus. |
| */ |
| BMCWEB_ROUTE(app, |
| "/redfish/v1/Systems/system/Actions/ComputerSystem.Reset/") |
| .privileges(redfish::privileges::postComputerSystem) |
| .methods( |
| boost::beast::http::verb:: |
| post)([](const crow::Request& req, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) { |
| std::string resetType; |
| if (!json_util::readJson(req, asyncResp->res, "ResetType", |
| resetType)) |
| { |
| return; |
| } |
| |
| // Get the command and host vs. chassis |
| std::string command; |
| bool hostCommand; |
| if ((resetType == "On") || (resetType == "ForceOn")) |
| { |
| command = "xyz.openbmc_project.State.Host.Transition.On"; |
| hostCommand = true; |
| } |
| else if (resetType == "ForceOff") |
| { |
| command = "xyz.openbmc_project.State.Chassis.Transition.Off"; |
| hostCommand = false; |
| } |
| else if (resetType == "ForceRestart") |
| { |
| command = |
| "xyz.openbmc_project.State.Host.Transition.ForceWarmReboot"; |
| hostCommand = true; |
| } |
| else if (resetType == "GracefulShutdown") |
| { |
| command = "xyz.openbmc_project.State.Host.Transition.Off"; |
| hostCommand = true; |
| } |
| else if (resetType == "GracefulRestart") |
| { |
| command = "xyz.openbmc_project.State.Host.Transition." |
| "GracefulWarmReboot"; |
| hostCommand = true; |
| } |
| else if (resetType == "PowerCycle") |
| { |
| command = "xyz.openbmc_project.State.Host.Transition.Reboot"; |
| hostCommand = true; |
| } |
| else if (resetType == "Nmi") |
| { |
| doNMI(asyncResp); |
| return; |
| } |
| else |
| { |
| messages::actionParameterUnknown(asyncResp->res, "Reset", |
| resetType); |
| return; |
| } |
| |
| if (hostCommand) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp, resetType](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_ERROR << "D-Bus responses error: " << ec; |
| if (ec.value() == |
| boost::asio::error::invalid_argument) |
| { |
| messages::actionParameterNotSupported( |
| asyncResp->res, resetType, "Reset"); |
| } |
| else |
| { |
| messages::internalError(asyncResp->res); |
| } |
| return; |
| } |
| messages::success(asyncResp->res); |
| }, |
| "xyz.openbmc_project.State.Host", |
| "/xyz/openbmc_project/state/host0", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.State.Host", "RequestedHostTransition", |
| std::variant<std::string>{command}); |
| } |
| else |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp, resetType](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_ERROR << "D-Bus responses error: " << ec; |
| if (ec.value() == |
| boost::asio::error::invalid_argument) |
| { |
| messages::actionParameterNotSupported( |
| asyncResp->res, resetType, "Reset"); |
| } |
| else |
| { |
| messages::internalError(asyncResp->res); |
| } |
| return; |
| } |
| messages::success(asyncResp->res); |
| }, |
| "xyz.openbmc_project.State.Chassis", |
| "/xyz/openbmc_project/state/chassis0", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.State.Chassis", |
| "RequestedPowerTransition", |
| std::variant<std::string>{command}); |
| } |
| }); |
| } |
| |
| /** |
| * Systems derived class for delivering Computer Systems Schema. |
| */ |
| inline void requestRoutesSystems(App& app) |
| { |
| |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| BMCWEB_ROUTE(app, "/redfish/v1/Systems/system/") |
| .privileges(redfish::privileges::getComputerSystem) |
| .methods( |
| boost::beast::http::verb:: |
| get)([](const crow::Request&, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) { |
| asyncResp->res.jsonValue["@odata.type"] = |
| "#ComputerSystem.v1_15_0.ComputerSystem"; |
| asyncResp->res.jsonValue["Name"] = "system"; |
| asyncResp->res.jsonValue["Id"] = "system"; |
| asyncResp->res.jsonValue["SystemType"] = "Physical"; |
| asyncResp->res.jsonValue["Description"] = "Computer System"; |
| asyncResp->res.jsonValue["ProcessorSummary"]["Count"] = 0; |
| asyncResp->res.jsonValue["ProcessorSummary"]["Status"]["State"] = |
| "Disabled"; |
| asyncResp->res.jsonValue["MemorySummary"]["TotalSystemMemoryGiB"] = |
| uint64_t(0); |
| asyncResp->res.jsonValue["MemorySummary"]["Status"]["State"] = |
| "Disabled"; |
| asyncResp->res.jsonValue["@odata.id"] = |
| "/redfish/v1/Systems/system"; |
| |
| asyncResp->res.jsonValue["Processors"] = { |
| {"@odata.id", "/redfish/v1/Systems/system/Processors"}}; |
| asyncResp->res.jsonValue["Memory"] = { |
| {"@odata.id", "/redfish/v1/Systems/system/Memory"}}; |
| asyncResp->res.jsonValue["Storage"] = { |
| {"@odata.id", "/redfish/v1/Systems/system/Storage"}}; |
| |
| asyncResp->res.jsonValue["Actions"]["#ComputerSystem.Reset"] = { |
| {"target", |
| "/redfish/v1/Systems/system/Actions/ComputerSystem.Reset"}, |
| {"@Redfish.ActionInfo", |
| "/redfish/v1/Systems/system/ResetActionInfo"}}; |
| |
| asyncResp->res.jsonValue["LogServices"] = { |
| {"@odata.id", "/redfish/v1/Systems/system/LogServices"}}; |
| |
| asyncResp->res.jsonValue["Bios"] = { |
| {"@odata.id", "/redfish/v1/Systems/system/Bios"}}; |
| |
| asyncResp->res.jsonValue["Links"]["ManagedBy"] = { |
| {{"@odata.id", "/redfish/v1/Managers/bmc"}}}; |
| |
| asyncResp->res.jsonValue["Status"] = { |
| {"Health", "OK"}, |
| {"State", "Enabled"}, |
| }; |
| |
| // Fill in SerialConsole info |
| asyncResp->res.jsonValue["SerialConsole"]["MaxConcurrentSessions"] = |
| 15; |
| asyncResp->res.jsonValue["SerialConsole"]["IPMI"] = { |
| {"ServiceEnabled", true}, |
| }; |
| // TODO (Gunnar): Should look for obmc-console-ssh@2200.service |
| asyncResp->res.jsonValue["SerialConsole"]["SSH"] = { |
| {"ServiceEnabled", true}, |
| {"Port", 2200}, |
| // https://github.com/openbmc/docs/blob/master/console.md |
| {"HotKeySequenceDisplay", "Press ~. to exit console"}, |
| }; |
| |
| #ifdef BMCWEB_ENABLE_KVM |
| // Fill in GraphicalConsole info |
| asyncResp->res.jsonValue["GraphicalConsole"] = { |
| {"ServiceEnabled", true}, |
| {"MaxConcurrentSessions", 4}, |
| {"ConnectTypesSupported", {"KVMIP"}}, |
| }; |
| #endif // BMCWEB_ENABLE_KVM |
| constexpr const std::array<const char*, 4> inventoryForSystems = { |
| "xyz.openbmc_project.Inventory.Item.Dimm", |
| "xyz.openbmc_project.Inventory.Item.Cpu", |
| "xyz.openbmc_project.Inventory.Item.Drive", |
| "xyz.openbmc_project.Inventory.Item.StorageController"}; |
| |
| auto health = std::make_shared<HealthPopulate>(asyncResp); |
| crow::connections::systemBus->async_method_call( |
| [health](const boost::system::error_code ec, |
| std::vector<std::string>& resp) { |
| if (ec) |
| { |
| // no inventory |
| return; |
| } |
| |
| health->inventory = std::move(resp); |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTreePaths", "/", |
| int32_t(0), inventoryForSystems); |
| |
| health->populate(); |
| |
| getMainChassisId( |
| asyncResp, [](const std::string& chassisId, |
| const std::shared_ptr<bmcweb::AsyncResp>& aRsp) { |
| aRsp->res.jsonValue["Links"]["Chassis"] = { |
| {{"@odata.id", "/redfish/v1/Chassis/" + chassisId}}}; |
| }); |
| |
| getLocationIndicatorActive(asyncResp); |
| // TODO (Gunnar): Remove IndicatorLED after enough time has passed |
| getIndicatorLedState(asyncResp); |
| getComputerSystem(asyncResp, health); |
| getHostState(asyncResp); |
| getBootProperties(asyncResp); |
| getBootProgress(asyncResp); |
| getPCIeDeviceList(asyncResp, "PCIeDevices"); |
| getHostWatchdogTimer(asyncResp); |
| getPowerRestorePolicy(asyncResp); |
| getAutomaticRetry(asyncResp); |
| getLastResetTime(asyncResp); |
| #ifdef BMCWEB_ENABLE_REDFISH_PROVISIONING_FEATURE |
| getProvisioningStatus(asyncResp); |
| #endif |
| getTrustedModuleRequiredToBoot(asyncResp); |
| getPowerMode(asyncResp); |
| }); |
| BMCWEB_ROUTE(app, "/redfish/v1/Systems/system/") |
| .privileges(redfish::privileges::patchComputerSystem) |
| .methods(boost::beast::http::verb::patch)( |
| [](const crow::Request& req, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) { |
| std::optional<bool> locationIndicatorActive; |
| std::optional<std::string> indicatorLed; |
| std::optional<nlohmann::json> bootProps; |
| std::optional<nlohmann::json> wdtTimerProps; |
| std::optional<std::string> assetTag; |
| std::optional<std::string> powerRestorePolicy; |
| std::optional<std::string> powerMode; |
| if (!json_util::readJson( |
| req, asyncResp->res, "IndicatorLED", indicatorLed, |
| "LocationIndicatorActive", locationIndicatorActive, |
| "Boot", bootProps, "WatchdogTimer", wdtTimerProps, |
| "PowerRestorePolicy", powerRestorePolicy, "AssetTag", |
| assetTag, "PowerMode", powerMode)) |
| { |
| return; |
| } |
| |
| asyncResp->res.result(boost::beast::http::status::no_content); |
| |
| if (assetTag) |
| { |
| setAssetTag(asyncResp, *assetTag); |
| } |
| |
| if (wdtTimerProps) |
| { |
| std::optional<bool> wdtEnable; |
| std::optional<std::string> wdtTimeOutAction; |
| |
| if (!json_util::readJson(*wdtTimerProps, asyncResp->res, |
| "FunctionEnabled", wdtEnable, |
| "TimeoutAction", wdtTimeOutAction)) |
| { |
| return; |
| } |
| setWDTProperties(asyncResp, wdtEnable, wdtTimeOutAction); |
| } |
| |
| if (bootProps) |
| { |
| std::optional<std::string> bootSource; |
| std::optional<std::string> bootType; |
| std::optional<std::string> bootEnable; |
| std::optional<std::string> automaticRetryConfig; |
| std::optional<bool> trustedModuleRequiredToBoot; |
| |
| if (!json_util::readJson( |
| *bootProps, asyncResp->res, |
| "BootSourceOverrideTarget", bootSource, |
| "BootSourceOverrideMode", bootType, |
| "BootSourceOverrideEnabled", bootEnable, |
| "AutomaticRetryConfig", automaticRetryConfig, |
| "TrustedModuleRequiredToBoot", |
| trustedModuleRequiredToBoot)) |
| { |
| return; |
| } |
| |
| if (bootSource || bootType || bootEnable) |
| { |
| setBootProperties(asyncResp, bootSource, bootType, |
| bootEnable); |
| } |
| if (automaticRetryConfig) |
| { |
| setAutomaticRetry(asyncResp, *automaticRetryConfig); |
| } |
| |
| if (trustedModuleRequiredToBoot) |
| { |
| setTrustedModuleRequiredToBoot( |
| asyncResp, *trustedModuleRequiredToBoot); |
| } |
| } |
| |
| if (locationIndicatorActive) |
| { |
| setLocationIndicatorActive(asyncResp, |
| *locationIndicatorActive); |
| } |
| |
| // TODO (Gunnar): Remove IndicatorLED after enough time has |
| // passed |
| if (indicatorLed) |
| { |
| setIndicatorLedState(asyncResp, *indicatorLed); |
| asyncResp->res.addHeader( |
| boost::beast::http::field::warning, |
| "299 - \"IndicatorLED is deprecated. Use " |
| "LocationIndicatorActive instead.\""); |
| } |
| |
| if (powerRestorePolicy) |
| { |
| setPowerRestorePolicy(asyncResp, *powerRestorePolicy); |
| } |
| |
| if (powerMode) |
| { |
| setPowerMode(asyncResp, *powerMode); |
| } |
| }); |
| } |
| |
| /** |
| * SystemResetActionInfo derived class for delivering Computer Systems |
| * ResetType AllowableValues using ResetInfo schema. |
| */ |
| inline void requestRoutesSystemResetActionInfo(App& app) |
| { |
| |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| BMCWEB_ROUTE(app, "/redfish/v1/Systems/system/ResetActionInfo/") |
| .privileges(redfish::privileges::getActionInfo) |
| .methods(boost::beast::http::verb::get)( |
| [](const crow::Request&, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) { |
| asyncResp->res.jsonValue = { |
| {"@odata.type", "#ActionInfo.v1_1_2.ActionInfo"}, |
| {"@odata.id", "/redfish/v1/Systems/system/ResetActionInfo"}, |
| {"Name", "Reset Action Info"}, |
| {"Id", "ResetActionInfo"}, |
| {"Parameters", |
| {{{"Name", "ResetType"}, |
| {"Required", true}, |
| {"DataType", "String"}, |
| {"AllowableValues", |
| {"On", "ForceOff", "ForceOn", "ForceRestart", |
| "GracefulRestart", "GracefulShutdown", "PowerCycle", |
| "Nmi"}}}}}}; |
| }); |
| } |
| } // namespace redfish |