| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| #pragma once |
| |
| #include <boost/container/flat_map.hpp> |
| #include <boost/container/flat_set.hpp> |
| #include <dbus_singleton.hpp> |
| #include <error_messages.hpp> |
| #include <node.hpp> |
| #include <utils/json_utils.hpp> |
| |
| #include <optional> |
| #include <regex> |
| #include <variant> |
| |
| namespace redfish |
| { |
| |
| /** |
| * DBus types primitives for several generic DBus interfaces |
| * TODO(Pawel) consider move this to separate file into boost::dbus |
| */ |
| using PropertiesMapType = boost::container::flat_map< |
| std::string, std::variant<std::string, bool, uint8_t, int16_t, uint16_t, |
| int32_t, uint32_t, int64_t, uint64_t, double>>; |
| |
| using GetManagedObjects = std::vector<std::pair< |
| sdbusplus::message::object_path, |
| std::vector<std::pair< |
| std::string, |
| boost::container::flat_map< |
| std::string, |
| std::variant<std::string, bool, uint8_t, int16_t, uint16_t, int32_t, |
| uint32_t, int64_t, uint64_t, double, |
| std::vector<std::string>>>>>>>; |
| |
| enum class LinkType |
| { |
| Local, |
| Global |
| }; |
| |
| /** |
| * Structure for keeping IPv4 data required by Redfish |
| */ |
| struct IPv4AddressData |
| { |
| std::string id; |
| std::string address; |
| std::string domain; |
| std::string gateway; |
| std::string netmask; |
| std::string origin; |
| LinkType linktype; |
| bool isActive; |
| |
| bool operator<(const IPv4AddressData& obj) const |
| { |
| return id < obj.id; |
| } |
| }; |
| |
| /** |
| * Structure for keeping IPv6 data required by Redfish |
| */ |
| struct IPv6AddressData |
| { |
| std::string id; |
| std::string address; |
| std::string origin; |
| uint8_t prefixLength; |
| |
| bool operator<(const IPv6AddressData& obj) const |
| { |
| return id < obj.id; |
| } |
| }; |
| /** |
| * Structure for keeping basic single Ethernet Interface information |
| * available from DBus |
| */ |
| struct EthernetInterfaceData |
| { |
| uint32_t speed; |
| bool auto_neg; |
| bool DNSEnabled; |
| bool NTPEnabled; |
| bool HostNameEnabled; |
| bool SendHostNameEnabled; |
| bool linkUp; |
| bool nicEnabled; |
| std::string DHCPEnabled; |
| std::string operatingMode; |
| std::string hostname; |
| std::string default_gateway; |
| std::string ipv6_default_gateway; |
| std::string mac_address; |
| std::vector<std::uint32_t> vlan_id; |
| std::vector<std::string> nameServers; |
| std::vector<std::string> staticNameServers; |
| std::vector<std::string> domainnames; |
| }; |
| |
| struct DHCPParameters |
| { |
| std::optional<bool> dhcpv4Enabled; |
| std::optional<bool> useDNSServers; |
| std::optional<bool> useNTPServers; |
| std::optional<bool> useUseDomainName; |
| std::optional<std::string> dhcpv6OperatingMode; |
| }; |
| |
| // Helper function that changes bits netmask notation (i.e. /24) |
| // into full dot notation |
| inline std::string getNetmask(unsigned int bits) |
| { |
| uint32_t value = 0xffffffff << (32 - bits); |
| std::string netmask = std::to_string((value >> 24) & 0xff) + "." + |
| std::to_string((value >> 16) & 0xff) + "." + |
| std::to_string((value >> 8) & 0xff) + "." + |
| std::to_string(value & 0xff); |
| return netmask; |
| } |
| |
| inline bool translateDHCPEnabledToBool(const std::string& inputDHCP, |
| bool isIPv4) |
| { |
| if (isIPv4) |
| { |
| return ( |
| (inputDHCP == |
| "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.v4") || |
| (inputDHCP == |
| "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.both")); |
| } |
| return ((inputDHCP == |
| "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.v6") || |
| (inputDHCP == |
| "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.both")); |
| } |
| |
| inline std::string getDhcpEnabledEnumeration(bool isIPv4, bool isIPv6) |
| { |
| if (isIPv4 && isIPv6) |
| { |
| return "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.both"; |
| } |
| if (isIPv4) |
| { |
| return "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.v4"; |
| } |
| if (isIPv6) |
| { |
| return "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.v6"; |
| } |
| return "xyz.openbmc_project.Network.EthernetInterface.DHCPConf.none"; |
| } |
| |
| inline std::string |
| translateAddressOriginDbusToRedfish(const std::string& inputOrigin, |
| bool isIPv4) |
| { |
| if (inputOrigin == "xyz.openbmc_project.Network.IP.AddressOrigin.Static") |
| { |
| return "Static"; |
| } |
| if (inputOrigin == "xyz.openbmc_project.Network.IP.AddressOrigin.LinkLocal") |
| { |
| if (isIPv4) |
| { |
| return "IPv4LinkLocal"; |
| } |
| return "LinkLocal"; |
| } |
| if (inputOrigin == "xyz.openbmc_project.Network.IP.AddressOrigin.DHCP") |
| { |
| if (isIPv4) |
| { |
| return "DHCP"; |
| } |
| return "DHCPv6"; |
| } |
| if (inputOrigin == "xyz.openbmc_project.Network.IP.AddressOrigin.SLAAC") |
| { |
| return "SLAAC"; |
| } |
| return ""; |
| } |
| |
| inline bool extractEthernetInterfaceData(const std::string& ethifaceId, |
| GetManagedObjects& dbusData, |
| EthernetInterfaceData& ethData) |
| { |
| bool idFound = false; |
| for (auto& objpath : dbusData) |
| { |
| for (auto& ifacePair : objpath.second) |
| { |
| if (objpath.first == "/xyz/openbmc_project/network/" + ethifaceId) |
| { |
| idFound = true; |
| if (ifacePair.first == "xyz.openbmc_project.Network.MACAddress") |
| { |
| for (const auto& propertyPair : ifacePair.second) |
| { |
| if (propertyPair.first == "MACAddress") |
| { |
| const std::string* mac = |
| std::get_if<std::string>(&propertyPair.second); |
| if (mac != nullptr) |
| { |
| ethData.mac_address = *mac; |
| } |
| } |
| } |
| } |
| else if (ifacePair.first == "xyz.openbmc_project.Network.VLAN") |
| { |
| for (const auto& propertyPair : ifacePair.second) |
| { |
| if (propertyPair.first == "Id") |
| { |
| const uint32_t* id = |
| std::get_if<uint32_t>(&propertyPair.second); |
| if (id != nullptr) |
| { |
| ethData.vlan_id.push_back(*id); |
| } |
| } |
| } |
| } |
| else if (ifacePair.first == |
| "xyz.openbmc_project.Network.EthernetInterface") |
| { |
| for (const auto& propertyPair : ifacePair.second) |
| { |
| if (propertyPair.first == "AutoNeg") |
| { |
| const bool* autoNeg = |
| std::get_if<bool>(&propertyPair.second); |
| if (autoNeg != nullptr) |
| { |
| ethData.auto_neg = *autoNeg; |
| } |
| } |
| else if (propertyPair.first == "Speed") |
| { |
| const uint32_t* speed = |
| std::get_if<uint32_t>(&propertyPair.second); |
| if (speed != nullptr) |
| { |
| ethData.speed = *speed; |
| } |
| } |
| else if (propertyPair.first == "LinkUp") |
| { |
| const bool* linkUp = |
| std::get_if<bool>(&propertyPair.second); |
| if (linkUp != nullptr) |
| { |
| ethData.linkUp = *linkUp; |
| } |
| } |
| else if (propertyPair.first == "NICEnabled") |
| { |
| const bool* nicEnabled = |
| std::get_if<bool>(&propertyPair.second); |
| if (nicEnabled != nullptr) |
| { |
| ethData.nicEnabled = *nicEnabled; |
| } |
| } |
| else if (propertyPair.first == "Nameservers") |
| { |
| const std::vector<std::string>* nameservers = |
| std::get_if<std::vector<std::string>>( |
| &propertyPair.second); |
| if (nameservers != nullptr) |
| { |
| ethData.nameServers = *nameservers; |
| } |
| } |
| else if (propertyPair.first == "StaticNameServers") |
| { |
| const std::vector<std::string>* staticNameServers = |
| std::get_if<std::vector<std::string>>( |
| &propertyPair.second); |
| if (staticNameServers != nullptr) |
| { |
| ethData.staticNameServers = *staticNameServers; |
| } |
| } |
| else if (propertyPair.first == "DHCPEnabled") |
| { |
| const std::string* dhcpEnabled = |
| std::get_if<std::string>(&propertyPair.second); |
| if (dhcpEnabled != nullptr) |
| { |
| ethData.DHCPEnabled = *dhcpEnabled; |
| } |
| } |
| else if (propertyPair.first == "DomainName") |
| { |
| const std::vector<std::string>* domainNames = |
| std::get_if<std::vector<std::string>>( |
| &propertyPair.second); |
| if (domainNames != nullptr) |
| { |
| ethData.domainnames = *domainNames; |
| } |
| } |
| else if (propertyPair.first == "DefaultGateway") |
| { |
| const std::string* defaultGateway = |
| std::get_if<std::string>(&propertyPair.second); |
| if (defaultGateway != nullptr) |
| { |
| std::string defaultGatewayStr = *defaultGateway; |
| if (defaultGatewayStr.empty()) |
| { |
| ethData.default_gateway = "0.0.0.0"; |
| } |
| else |
| { |
| ethData.default_gateway = defaultGatewayStr; |
| } |
| } |
| } |
| else if (propertyPair.first == "DefaultGateway6") |
| { |
| const std::string* defaultGateway6 = |
| std::get_if<std::string>(&propertyPair.second); |
| if (defaultGateway6 != nullptr) |
| { |
| std::string defaultGateway6Str = |
| *defaultGateway6; |
| if (defaultGateway6Str.empty()) |
| { |
| ethData.ipv6_default_gateway = |
| "0:0:0:0:0:0:0:0"; |
| } |
| else |
| { |
| ethData.ipv6_default_gateway = |
| defaultGateway6Str; |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| if (objpath.first == "/xyz/openbmc_project/network/config/dhcp") |
| { |
| if (ifacePair.first == |
| "xyz.openbmc_project.Network.DHCPConfiguration") |
| { |
| for (const auto& propertyPair : ifacePair.second) |
| { |
| if (propertyPair.first == "DNSEnabled") |
| { |
| const bool* dnsEnabled = |
| std::get_if<bool>(&propertyPair.second); |
| if (dnsEnabled != nullptr) |
| { |
| ethData.DNSEnabled = *dnsEnabled; |
| } |
| } |
| else if (propertyPair.first == "NTPEnabled") |
| { |
| const bool* ntpEnabled = |
| std::get_if<bool>(&propertyPair.second); |
| if (ntpEnabled != nullptr) |
| { |
| ethData.NTPEnabled = *ntpEnabled; |
| } |
| } |
| else if (propertyPair.first == "HostNameEnabled") |
| { |
| const bool* hostNameEnabled = |
| std::get_if<bool>(&propertyPair.second); |
| if (hostNameEnabled != nullptr) |
| { |
| ethData.HostNameEnabled = *hostNameEnabled; |
| } |
| } |
| else if (propertyPair.first == "SendHostNameEnabled") |
| { |
| const bool* sendHostNameEnabled = |
| std::get_if<bool>(&propertyPair.second); |
| if (sendHostNameEnabled != nullptr) |
| { |
| ethData.SendHostNameEnabled = |
| *sendHostNameEnabled; |
| } |
| } |
| } |
| } |
| } |
| // System configuration shows up in the global namespace, so no need |
| // to check eth number |
| if (ifacePair.first == |
| "xyz.openbmc_project.Network.SystemConfiguration") |
| { |
| for (const auto& propertyPair : ifacePair.second) |
| { |
| if (propertyPair.first == "HostName") |
| { |
| const std::string* hostname = |
| std::get_if<std::string>(&propertyPair.second); |
| if (hostname != nullptr) |
| { |
| ethData.hostname = *hostname; |
| } |
| } |
| } |
| } |
| } |
| } |
| return idFound; |
| } |
| |
| // Helper function that extracts data for single ethernet ipv6 address |
| inline void |
| extractIPV6Data(const std::string& ethifaceId, |
| const GetManagedObjects& dbusData, |
| boost::container::flat_set<IPv6AddressData>& ipv6Config) |
| { |
| const std::string ipv6PathStart = |
| "/xyz/openbmc_project/network/" + ethifaceId + "/ipv6/"; |
| |
| // Since there might be several IPv6 configurations aligned with |
| // single ethernet interface, loop over all of them |
| for (const auto& objpath : dbusData) |
| { |
| // Check if proper pattern for object path appears |
| if (boost::starts_with(objpath.first.str, ipv6PathStart)) |
| { |
| for (auto& interface : objpath.second) |
| { |
| if (interface.first == "xyz.openbmc_project.Network.IP") |
| { |
| // Instance IPv6AddressData structure, and set as |
| // appropriate |
| std::pair< |
| boost::container::flat_set<IPv6AddressData>::iterator, |
| bool> |
| it = ipv6Config.insert(IPv6AddressData{}); |
| IPv6AddressData& ipv6Address = *it.first; |
| ipv6Address.id = |
| objpath.first.str.substr(ipv6PathStart.size()); |
| for (auto& property : interface.second) |
| { |
| if (property.first == "Address") |
| { |
| const std::string* address = |
| std::get_if<std::string>(&property.second); |
| if (address != nullptr) |
| { |
| ipv6Address.address = *address; |
| } |
| } |
| else if (property.first == "Origin") |
| { |
| const std::string* origin = |
| std::get_if<std::string>(&property.second); |
| if (origin != nullptr) |
| { |
| ipv6Address.origin = |
| translateAddressOriginDbusToRedfish(*origin, |
| false); |
| } |
| } |
| else if (property.first == "PrefixLength") |
| { |
| const uint8_t* prefix = |
| std::get_if<uint8_t>(&property.second); |
| if (prefix != nullptr) |
| { |
| ipv6Address.prefixLength = *prefix; |
| } |
| } |
| else |
| { |
| BMCWEB_LOG_ERROR |
| << "Got extra property: " << property.first |
| << " on the " << objpath.first.str << " object"; |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| // Helper function that extracts data for single ethernet ipv4 address |
| inline void |
| extractIPData(const std::string& ethifaceId, |
| const GetManagedObjects& dbusData, |
| boost::container::flat_set<IPv4AddressData>& ipv4Config) |
| { |
| const std::string ipv4PathStart = |
| "/xyz/openbmc_project/network/" + ethifaceId + "/ipv4/"; |
| |
| // Since there might be several IPv4 configurations aligned with |
| // single ethernet interface, loop over all of them |
| for (const auto& objpath : dbusData) |
| { |
| // Check if proper pattern for object path appears |
| if (boost::starts_with(objpath.first.str, ipv4PathStart)) |
| { |
| for (auto& interface : objpath.second) |
| { |
| if (interface.first == "xyz.openbmc_project.Network.IP") |
| { |
| // Instance IPv4AddressData structure, and set as |
| // appropriate |
| std::pair< |
| boost::container::flat_set<IPv4AddressData>::iterator, |
| bool> |
| it = ipv4Config.insert(IPv4AddressData{}); |
| IPv4AddressData& ipv4Address = *it.first; |
| ipv4Address.id = |
| objpath.first.str.substr(ipv4PathStart.size()); |
| for (auto& property : interface.second) |
| { |
| if (property.first == "Address") |
| { |
| const std::string* address = |
| std::get_if<std::string>(&property.second); |
| if (address != nullptr) |
| { |
| ipv4Address.address = *address; |
| } |
| } |
| else if (property.first == "Origin") |
| { |
| const std::string* origin = |
| std::get_if<std::string>(&property.second); |
| if (origin != nullptr) |
| { |
| ipv4Address.origin = |
| translateAddressOriginDbusToRedfish(*origin, |
| true); |
| } |
| } |
| else if (property.first == "PrefixLength") |
| { |
| const uint8_t* mask = |
| std::get_if<uint8_t>(&property.second); |
| if (mask != nullptr) |
| { |
| // convert it to the string |
| ipv4Address.netmask = getNetmask(*mask); |
| } |
| } |
| else |
| { |
| BMCWEB_LOG_ERROR |
| << "Got extra property: " << property.first |
| << " on the " << objpath.first.str << " object"; |
| } |
| } |
| // Check if given address is local, or global |
| ipv4Address.linktype = |
| boost::starts_with(ipv4Address.address, "169.254.") |
| ? LinkType::Local |
| : LinkType::Global; |
| } |
| } |
| } |
| } |
| } |
| |
| /** |
| * @brief Sets given Id on the given VLAN interface through D-Bus |
| * |
| * @param[in] ifaceId Id of VLAN interface that should be modified |
| * @param[in] inputVlanId New ID of the VLAN |
| * @param[in] callback Function that will be called after the operation |
| * |
| * @return None. |
| */ |
| template <typename CallbackFunc> |
| void changeVlanId(const std::string& ifaceId, const uint32_t& inputVlanId, |
| CallbackFunc&& callback) |
| { |
| crow::connections::systemBus->async_method_call( |
| callback, "xyz.openbmc_project.Network", |
| std::string("/xyz/openbmc_project/network/") + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.VLAN", "Id", |
| std::variant<uint32_t>(inputVlanId)); |
| } |
| |
| /** |
| * @brief Helper function that verifies IP address to check if it is in |
| * proper format. If bits pointer is provided, also calculates active |
| * bit count for Subnet Mask. |
| * |
| * @param[in] ip IP that will be verified |
| * @param[out] bits Calculated mask in bits notation |
| * |
| * @return true in case of success, false otherwise |
| */ |
| inline bool ipv4VerifyIpAndGetBitcount(const std::string& ip, |
| uint8_t* bits = nullptr) |
| { |
| std::vector<std::string> bytesInMask; |
| |
| boost::split(bytesInMask, ip, boost::is_any_of(".")); |
| |
| static const constexpr int ipV4AddressSectionsCount = 4; |
| if (bytesInMask.size() != ipV4AddressSectionsCount) |
| { |
| return false; |
| } |
| |
| if (bits != nullptr) |
| { |
| *bits = 0; |
| } |
| |
| char* endPtr; |
| long previousValue = 255; |
| bool firstZeroInByteHit; |
| for (const std::string& byte : bytesInMask) |
| { |
| if (byte.empty()) |
| { |
| return false; |
| } |
| |
| // Use strtol instead of stroi to avoid exceptions |
| long value = std::strtol(byte.c_str(), &endPtr, 10); |
| |
| // endPtr should point to the end of the string, otherwise given string |
| // is not 100% number |
| if (*endPtr != '\0') |
| { |
| return false; |
| } |
| |
| // Value should be contained in byte |
| if (value < 0 || value > 255) |
| { |
| return false; |
| } |
| |
| if (bits != nullptr) |
| { |
| // Mask has to be continuous between bytes |
| if (previousValue != 255 && value != 0) |
| { |
| return false; |
| } |
| |
| // Mask has to be continuous inside bytes |
| firstZeroInByteHit = false; |
| |
| // Count bits |
| for (long bitIdx = 7; bitIdx >= 0; bitIdx--) |
| { |
| if (value & (1L << bitIdx)) |
| { |
| if (firstZeroInByteHit) |
| { |
| // Continuity not preserved |
| return false; |
| } |
| (*bits)++; |
| } |
| else |
| { |
| firstZeroInByteHit = true; |
| } |
| } |
| } |
| |
| previousValue = value; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * @brief Deletes given IPv4 interface |
| * |
| * @param[in] ifaceId Id of interface whose IP should be deleted |
| * @param[in] ipHash DBus Hash id of IP that should be deleted |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| inline void deleteIPv4(const std::string& ifaceId, const std::string& ipHash, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId + "/ipv4/" + ipHash, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| } |
| |
| inline void updateIPv4DefaultGateway( |
| const std::string& ifaceId, const std::string& gateway, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| asyncResp->res.result(boost::beast::http::status::no_content); |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.EthernetInterface", "DefaultGateway", |
| std::variant<std::string>(gateway)); |
| } |
| /** |
| * @brief Creates a static IPv4 entry |
| * |
| * @param[in] ifaceId Id of interface upon which to create the IPv4 entry |
| * @param[in] prefixLength IPv4 prefix syntax for the subnet mask |
| * @param[in] gateway IPv4 address of this interfaces gateway |
| * @param[in] address IPv4 address to assign to this interface |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| inline void createIPv4(const std::string& ifaceId, uint8_t prefixLength, |
| const std::string& gateway, const std::string& address, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| auto createIpHandler = [asyncResp, ifaceId, |
| gateway](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| updateIPv4DefaultGateway(ifaceId, gateway, asyncResp); |
| }; |
| |
| crow::connections::systemBus->async_method_call( |
| std::move(createIpHandler), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "xyz.openbmc_project.Network.IP.Create", "IP", |
| "xyz.openbmc_project.Network.IP.Protocol.IPv4", address, prefixLength, |
| gateway); |
| } |
| |
| /** |
| * @brief Deletes the IPv4 entry for this interface and creates a replacement |
| * static IPv4 entry |
| * |
| * @param[in] ifaceId Id of interface upon which to create the IPv4 entry |
| * @param[in] id The unique hash entry identifying the DBus entry |
| * @param[in] prefixLength IPv4 prefix syntax for the subnet mask |
| * @param[in] gateway IPv4 address of this interfaces gateway |
| * @param[in] address IPv4 address to assign to this interface |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| inline void |
| deleteAndCreateIPv4(const std::string& ifaceId, const std::string& id, |
| uint8_t prefixLength, const std::string& gateway, |
| const std::string& address, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp, ifaceId, address, prefixLength, |
| gateway](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| crow::connections::systemBus->async_method_call( |
| [asyncResp, ifaceId, |
| gateway](const boost::system::error_code ec2) { |
| if (ec2) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| updateIPv4DefaultGateway(ifaceId, gateway, asyncResp); |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "xyz.openbmc_project.Network.IP.Create", "IP", |
| "xyz.openbmc_project.Network.IP.Protocol.IPv4", address, |
| prefixLength, gateway); |
| }, |
| "xyz.openbmc_project.Network", |
| +"/xyz/openbmc_project/network/" + ifaceId + "/ipv4/" + id, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| } |
| |
| /** |
| * @brief Deletes given IPv6 |
| * |
| * @param[in] ifaceId Id of interface whose IP should be deleted |
| * @param[in] ipHash DBus Hash id of IP that should be deleted |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| inline void deleteIPv6(const std::string& ifaceId, const std::string& ipHash, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId + "/ipv6/" + ipHash, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| } |
| |
| /** |
| * @brief Deletes the IPv6 entry for this interface and creates a replacement |
| * static IPv6 entry |
| * |
| * @param[in] ifaceId Id of interface upon which to create the IPv6 entry |
| * @param[in] id The unique hash entry identifying the DBus entry |
| * @param[in] prefixLength IPv6 prefix syntax for the subnet mask |
| * @param[in] address IPv6 address to assign to this interface |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| inline void |
| deleteAndCreateIPv6(const std::string& ifaceId, const std::string& id, |
| uint8_t prefixLength, const std::string& address, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp, ifaceId, address, |
| prefixLength](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec2) { |
| if (ec2) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "xyz.openbmc_project.Network.IP.Create", "IP", |
| "xyz.openbmc_project.Network.IP.Protocol.IPv6", address, |
| prefixLength, ""); |
| }, |
| "xyz.openbmc_project.Network", |
| +"/xyz/openbmc_project/network/" + ifaceId + "/ipv6/" + id, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| } |
| |
| /** |
| * @brief Creates IPv6 with given data |
| * |
| * @param[in] ifaceId Id of interface whose IP should be added |
| * @param[in] prefixLength Prefix length that needs to be added |
| * @param[in] address IP address that needs to be added |
| * @param[io] asyncResp Response object that will be returned to client |
| * |
| * @return None |
| */ |
| inline void createIPv6(const std::string& ifaceId, uint8_t prefixLength, |
| const std::string& address, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| auto createIpHandler = [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }; |
| // Passing null for gateway, as per redfish spec IPv6StaticAddresses object |
| // does not have associated gateway property |
| crow::connections::systemBus->async_method_call( |
| std::move(createIpHandler), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "xyz.openbmc_project.Network.IP.Create", "IP", |
| "xyz.openbmc_project.Network.IP.Protocol.IPv6", address, prefixLength, |
| ""); |
| } |
| |
| /** |
| * Function that retrieves all properties for given Ethernet Interface |
| * Object |
| * from EntityManager Network Manager |
| * @param ethiface_id a eth interface id to query on DBus |
| * @param callback a function that shall be called to convert Dbus output |
| * into JSON |
| */ |
| template <typename CallbackFunc> |
| void getEthernetIfaceData(const std::string& ethifaceId, |
| CallbackFunc&& callback) |
| { |
| crow::connections::systemBus->async_method_call( |
| [ethifaceId{std::string{ethifaceId}}, callback{std::move(callback)}]( |
| const boost::system::error_code errorCode, |
| GetManagedObjects& resp) { |
| EthernetInterfaceData ethData{}; |
| boost::container::flat_set<IPv4AddressData> ipv4Data; |
| boost::container::flat_set<IPv6AddressData> ipv6Data; |
| |
| if (errorCode) |
| { |
| callback(false, ethData, ipv4Data, ipv6Data); |
| return; |
| } |
| |
| bool found = |
| extractEthernetInterfaceData(ethifaceId, resp, ethData); |
| if (!found) |
| { |
| callback(false, ethData, ipv4Data, ipv6Data); |
| return; |
| } |
| |
| extractIPData(ethifaceId, resp, ipv4Data); |
| // Fix global GW |
| for (IPv4AddressData& ipv4 : ipv4Data) |
| { |
| if (((ipv4.linktype == LinkType::Global) && |
| (ipv4.gateway == "0.0.0.0")) || |
| (ipv4.origin == "DHCP") || (ipv4.origin == "Static")) |
| { |
| ipv4.gateway = ethData.default_gateway; |
| } |
| } |
| |
| extractIPV6Data(ethifaceId, resp, ipv6Data); |
| // Finally make a callback with useful data |
| callback(true, ethData, ipv4Data, ipv6Data); |
| }, |
| "xyz.openbmc_project.Network", "/xyz/openbmc_project/network", |
| "org.freedesktop.DBus.ObjectManager", "GetManagedObjects"); |
| } |
| |
| /** |
| * Function that retrieves all Ethernet Interfaces available through Network |
| * Manager |
| * @param callback a function that shall be called to convert Dbus output |
| * into JSON. |
| */ |
| template <typename CallbackFunc> |
| void getEthernetIfaceList(CallbackFunc&& callback) |
| { |
| crow::connections::systemBus->async_method_call( |
| [callback{std::move(callback)}]( |
| const boost::system::error_code errorCode, |
| GetManagedObjects& resp) { |
| // Callback requires vector<string> to retrieve all available |
| // ethernet interfaces |
| boost::container::flat_set<std::string> ifaceList; |
| ifaceList.reserve(resp.size()); |
| if (errorCode) |
| { |
| callback(false, ifaceList); |
| return; |
| } |
| |
| // Iterate over all retrieved ObjectPaths. |
| for (const auto& objpath : resp) |
| { |
| // And all interfaces available for certain ObjectPath. |
| for (const auto& interface : objpath.second) |
| { |
| // If interface is |
| // xyz.openbmc_project.Network.EthernetInterface, this is |
| // what we're looking for. |
| if (interface.first == |
| "xyz.openbmc_project.Network.EthernetInterface") |
| { |
| std::string ifaceId = objpath.first.filename(); |
| if (ifaceId.empty()) |
| { |
| continue; |
| } |
| // and put it into output vector. |
| ifaceList.emplace(ifaceId); |
| } |
| } |
| } |
| // Finally make a callback with useful data |
| callback(true, ifaceList); |
| }, |
| "xyz.openbmc_project.Network", "/xyz/openbmc_project/network", |
| "org.freedesktop.DBus.ObjectManager", "GetManagedObjects"); |
| } |
| |
| /** |
| * EthernetCollection derived class for delivering Ethernet Collection Schema |
| */ |
| class EthernetCollection : public Node |
| { |
| public: |
| EthernetCollection(App& app) : |
| Node(app, "/redfish/v1/Managers/bmc/EthernetInterfaces/") |
| { |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| private: |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request&, const std::vector<std::string>&) override |
| { |
| asyncResp->res.jsonValue["@odata.type"] = |
| "#EthernetInterfaceCollection.EthernetInterfaceCollection"; |
| asyncResp->res.jsonValue["@odata.id"] = |
| "/redfish/v1/Managers/bmc/EthernetInterfaces"; |
| asyncResp->res.jsonValue["Name"] = |
| "Ethernet Network Interface Collection"; |
| asyncResp->res.jsonValue["Description"] = |
| "Collection of EthernetInterfaces for this Manager"; |
| |
| // Get eth interface list, and call the below callback for JSON |
| // preparation |
| getEthernetIfaceList( |
| [asyncResp]( |
| const bool& success, |
| const boost::container::flat_set<std::string>& ifaceList) { |
| if (!success) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| nlohmann::json& ifaceArray = |
| asyncResp->res.jsonValue["Members"]; |
| ifaceArray = nlohmann::json::array(); |
| std::string tag = "_"; |
| for (const std::string& ifaceItem : ifaceList) |
| { |
| std::size_t found = ifaceItem.find(tag); |
| if (found == std::string::npos) |
| { |
| ifaceArray.push_back( |
| {{"@odata.id", |
| "/redfish/v1/Managers/bmc/EthernetInterfaces/" + |
| ifaceItem}}); |
| } |
| } |
| |
| asyncResp->res.jsonValue["Members@odata.count"] = |
| ifaceArray.size(); |
| asyncResp->res.jsonValue["@odata.id"] = |
| "/redfish/v1/Managers/bmc/EthernetInterfaces"; |
| }); |
| } |
| }; |
| |
| /** |
| * EthernetInterface derived class for delivering Ethernet Schema |
| */ |
| class EthernetInterface : public Node |
| { |
| public: |
| /* |
| * Default Constructor |
| */ |
| EthernetInterface(App& app) : |
| Node(app, "/redfish/v1/Managers/bmc/EthernetInterfaces/<str>/", |
| std::string()) |
| { |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| private: |
| void |
| handleHostnamePatch(const std::string& hostname, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| // SHOULD handle host names of up to 255 characters(RFC 1123) |
| if (hostname.length() > 255) |
| { |
| messages::propertyValueFormatError(asyncResp->res, hostname, |
| "HostName"); |
| return; |
| } |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/config", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.SystemConfiguration", "HostName", |
| std::variant<std::string>(hostname)); |
| } |
| |
| void handleDomainnamePatch( |
| const std::string& ifaceId, const std::string& domainname, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| std::vector<std::string> vectorDomainname = {domainname}; |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.EthernetInterface", "DomainName", |
| std::variant<std::vector<std::string>>(vectorDomainname)); |
| } |
| |
| void handleFqdnPatch(const std::string& ifaceId, const std::string& fqdn, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| // Total length of FQDN must not exceed 255 characters(RFC 1035) |
| if (fqdn.length() > 255) |
| { |
| messages::propertyValueFormatError(asyncResp->res, fqdn, "FQDN"); |
| return; |
| } |
| |
| size_t pos = fqdn.find('.'); |
| if (pos == std::string::npos) |
| { |
| messages::propertyValueFormatError(asyncResp->res, fqdn, "FQDN"); |
| return; |
| } |
| |
| std::string hostname; |
| std::string domainname; |
| domainname = (fqdn).substr(pos + 1); |
| hostname = (fqdn).substr(0, pos); |
| |
| if (!isHostnameValid(hostname) || !isDomainnameValid(domainname)) |
| { |
| messages::propertyValueFormatError(asyncResp->res, fqdn, "FQDN"); |
| return; |
| } |
| |
| handleHostnamePatch(hostname, asyncResp); |
| handleDomainnamePatch(ifaceId, domainname, asyncResp); |
| } |
| |
| bool isHostnameValid(const std::string& hostname) |
| { |
| // A valid host name can never have the dotted-decimal form (RFC 1123) |
| if (std::all_of(hostname.begin(), hostname.end(), ::isdigit)) |
| { |
| return false; |
| } |
| // Each label(hostname/subdomains) within a valid FQDN |
| // MUST handle host names of up to 63 characters (RFC 1123) |
| // labels cannot start or end with hyphens (RFC 952) |
| // labels can start with numbers (RFC 1123) |
| const std::regex pattern( |
| "^[a-zA-Z0-9]|[a-zA-Z0-9][a-zA-Z0-9\\-]{0,61}[a-zA-Z0-9]$"); |
| |
| return std::regex_match(hostname, pattern); |
| } |
| |
| bool isDomainnameValid(const std::string& domainname) |
| { |
| // Can have multiple subdomains |
| // Top Level Domain's min length is 2 character |
| const std::regex pattern("^([A-Za-z0-9][a-zA-Z0-9\\-]{1,61}|[a-zA-Z0-9]" |
| "{1,30}\\.)*[a-zA-Z]{2,}$"); |
| |
| return std::regex_match(domainname, pattern); |
| } |
| |
| void handleMACAddressPatch( |
| const std::string& ifaceId, const std::string& macAddress, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp, macAddress](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.MACAddress", "MACAddress", |
| std::variant<std::string>(macAddress)); |
| } |
| |
| void setDHCPEnabled(const std::string& ifaceId, |
| const std::string& propertyName, const bool v4Value, |
| const bool v6Value, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| const std::string dhcp = getDhcpEnabledEnumeration(v4Value, v6Value); |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_ERROR << "D-Bus responses error: " << ec; |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| messages::success(asyncResp->res); |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.EthernetInterface", propertyName, |
| std::variant<std::string>{dhcp}); |
| } |
| |
| void setEthernetInterfaceBoolProperty( |
| const std::string& ifaceId, const std::string& propertyName, |
| const bool& value, const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_ERROR << "D-Bus responses error: " << ec; |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.EthernetInterface", propertyName, |
| std::variant<bool>{value}); |
| } |
| |
| void setDHCPv4Config(const std::string& propertyName, const bool& value, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| BMCWEB_LOG_DEBUG << propertyName << " = " << value; |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| BMCWEB_LOG_ERROR << "D-Bus responses error: " << ec; |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/config/dhcp", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.DHCPConfiguration", propertyName, |
| std::variant<bool>{value}); |
| } |
| |
| void handleDHCPPatch(const std::string& ifaceId, |
| const EthernetInterfaceData& ethData, |
| const DHCPParameters& v4dhcpParms, |
| const DHCPParameters& v6dhcpParms, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| bool ipv4Active = translateDHCPEnabledToBool(ethData.DHCPEnabled, true); |
| bool ipv6Active = |
| translateDHCPEnabledToBool(ethData.DHCPEnabled, false); |
| |
| bool nextv4DHCPState = |
| v4dhcpParms.dhcpv4Enabled ? *v4dhcpParms.dhcpv4Enabled : ipv4Active; |
| |
| bool nextv6DHCPState{}; |
| if (v6dhcpParms.dhcpv6OperatingMode) |
| { |
| if ((*v6dhcpParms.dhcpv6OperatingMode != "Stateful") && |
| (*v6dhcpParms.dhcpv6OperatingMode != "Stateless") && |
| (*v6dhcpParms.dhcpv6OperatingMode != "Disabled")) |
| { |
| messages::propertyValueFormatError( |
| asyncResp->res, *v6dhcpParms.dhcpv6OperatingMode, |
| "OperatingMode"); |
| return; |
| } |
| nextv6DHCPState = (*v6dhcpParms.dhcpv6OperatingMode == "Stateful"); |
| } |
| else |
| { |
| nextv6DHCPState = ipv6Active; |
| } |
| |
| bool nextDNS{}; |
| if (v4dhcpParms.useDNSServers && v6dhcpParms.useDNSServers) |
| { |
| if (*v4dhcpParms.useDNSServers != *v6dhcpParms.useDNSServers) |
| { |
| messages::generalError(asyncResp->res); |
| return; |
| } |
| nextDNS = *v4dhcpParms.useDNSServers; |
| } |
| else if (v4dhcpParms.useDNSServers) |
| { |
| nextDNS = *v4dhcpParms.useDNSServers; |
| } |
| else if (v6dhcpParms.useDNSServers) |
| { |
| nextDNS = *v6dhcpParms.useDNSServers; |
| } |
| else |
| { |
| nextDNS = ethData.DNSEnabled; |
| } |
| |
| bool nextNTP{}; |
| if (v4dhcpParms.useNTPServers && v6dhcpParms.useNTPServers) |
| { |
| if (*v4dhcpParms.useNTPServers != *v6dhcpParms.useNTPServers) |
| { |
| messages::generalError(asyncResp->res); |
| return; |
| } |
| nextNTP = *v4dhcpParms.useNTPServers; |
| } |
| else if (v4dhcpParms.useNTPServers) |
| { |
| nextNTP = *v4dhcpParms.useNTPServers; |
| } |
| else if (v6dhcpParms.useNTPServers) |
| { |
| nextNTP = *v6dhcpParms.useNTPServers; |
| } |
| else |
| { |
| nextNTP = ethData.NTPEnabled; |
| } |
| |
| bool nextUseDomain{}; |
| if (v4dhcpParms.useUseDomainName && v6dhcpParms.useUseDomainName) |
| { |
| if (*v4dhcpParms.useUseDomainName != *v6dhcpParms.useUseDomainName) |
| { |
| messages::generalError(asyncResp->res); |
| return; |
| } |
| nextUseDomain = *v4dhcpParms.useUseDomainName; |
| } |
| else if (v4dhcpParms.useUseDomainName) |
| { |
| nextUseDomain = *v4dhcpParms.useUseDomainName; |
| } |
| else if (v6dhcpParms.useUseDomainName) |
| { |
| nextUseDomain = *v6dhcpParms.useUseDomainName; |
| } |
| else |
| { |
| nextUseDomain = ethData.HostNameEnabled; |
| } |
| |
| BMCWEB_LOG_DEBUG << "set DHCPEnabled..."; |
| setDHCPEnabled(ifaceId, "DHCPEnabled", nextv4DHCPState, nextv6DHCPState, |
| asyncResp); |
| BMCWEB_LOG_DEBUG << "set DNSEnabled..."; |
| setDHCPv4Config("DNSEnabled", nextDNS, asyncResp); |
| BMCWEB_LOG_DEBUG << "set NTPEnabled..."; |
| setDHCPv4Config("NTPEnabled", nextNTP, asyncResp); |
| BMCWEB_LOG_DEBUG << "set HostNameEnabled..."; |
| setDHCPv4Config("HostNameEnabled", nextUseDomain, asyncResp); |
| } |
| |
| boost::container::flat_set<IPv4AddressData>::const_iterator |
| getNextStaticIpEntry( |
| const boost::container::flat_set<IPv4AddressData>::const_iterator& |
| head, |
| const boost::container::flat_set<IPv4AddressData>::const_iterator& |
| end) |
| { |
| return std::find_if(head, end, [](const IPv4AddressData& value) { |
| return value.origin == "Static"; |
| }); |
| } |
| |
| boost::container::flat_set<IPv6AddressData>::const_iterator |
| getNextStaticIpEntry( |
| const boost::container::flat_set<IPv6AddressData>::const_iterator& |
| head, |
| const boost::container::flat_set<IPv6AddressData>::const_iterator& |
| end) |
| { |
| return std::find_if(head, end, [](const IPv6AddressData& value) { |
| return value.origin == "Static"; |
| }); |
| } |
| |
| void handleIPv4StaticPatch( |
| const std::string& ifaceId, nlohmann::json& input, |
| const boost::container::flat_set<IPv4AddressData>& ipv4Data, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| if ((!input.is_array()) || input.empty()) |
| { |
| messages::propertyValueTypeError( |
| asyncResp->res, |
| input.dump(2, ' ', true, |
| nlohmann::json::error_handler_t::replace), |
| "IPv4StaticAddresses"); |
| return; |
| } |
| |
| unsigned entryIdx = 1; |
| // Find the first static IP address currently active on the NIC and |
| // match it to the first JSON element in the IPv4StaticAddresses array. |
| // Match each subsequent JSON element to the next static IP programmed |
| // into the NIC. |
| boost::container::flat_set<IPv4AddressData>::const_iterator niciPentry = |
| getNextStaticIpEntry(ipv4Data.cbegin(), ipv4Data.cend()); |
| |
| for (nlohmann::json& thisJson : input) |
| { |
| std::string pathString = |
| "IPv4StaticAddresses/" + std::to_string(entryIdx); |
| |
| if (!thisJson.is_null() && !thisJson.empty()) |
| { |
| std::optional<std::string> address; |
| std::optional<std::string> subnetMask; |
| std::optional<std::string> gateway; |
| |
| if (!json_util::readJson(thisJson, asyncResp->res, "Address", |
| address, "SubnetMask", subnetMask, |
| "Gateway", gateway)) |
| { |
| messages::propertyValueFormatError( |
| asyncResp->res, |
| thisJson.dump(2, ' ', true, |
| nlohmann::json::error_handler_t::replace), |
| pathString); |
| return; |
| } |
| |
| // Find the address/subnet/gateway values. Any values that are |
| // not explicitly provided are assumed to be unmodified from the |
| // current state of the interface. Merge existing state into the |
| // current request. |
| const std::string* addr = nullptr; |
| const std::string* gw = nullptr; |
| uint8_t prefixLength = 0; |
| bool errorInEntry = false; |
| if (address) |
| { |
| if (ipv4VerifyIpAndGetBitcount(*address)) |
| { |
| addr = &(*address); |
| } |
| else |
| { |
| messages::propertyValueFormatError( |
| asyncResp->res, *address, pathString + "/Address"); |
| errorInEntry = true; |
| } |
| } |
| else if (niciPentry != ipv4Data.cend()) |
| { |
| addr = &(niciPentry->address); |
| } |
| else |
| { |
| messages::propertyMissing(asyncResp->res, |
| pathString + "/Address"); |
| errorInEntry = true; |
| } |
| |
| if (subnetMask) |
| { |
| if (!ipv4VerifyIpAndGetBitcount(*subnetMask, &prefixLength)) |
| { |
| messages::propertyValueFormatError( |
| asyncResp->res, *subnetMask, |
| pathString + "/SubnetMask"); |
| errorInEntry = true; |
| } |
| } |
| else if (niciPentry != ipv4Data.cend()) |
| { |
| if (!ipv4VerifyIpAndGetBitcount(niciPentry->netmask, |
| &prefixLength)) |
| { |
| messages::propertyValueFormatError( |
| asyncResp->res, niciPentry->netmask, |
| pathString + "/SubnetMask"); |
| errorInEntry = true; |
| } |
| } |
| else |
| { |
| messages::propertyMissing(asyncResp->res, |
| pathString + "/SubnetMask"); |
| errorInEntry = true; |
| } |
| |
| if (gateway) |
| { |
| if (ipv4VerifyIpAndGetBitcount(*gateway)) |
| { |
| gw = &(*gateway); |
| } |
| else |
| { |
| messages::propertyValueFormatError( |
| asyncResp->res, *gateway, pathString + "/Gateway"); |
| errorInEntry = true; |
| } |
| } |
| else if (niciPentry != ipv4Data.cend()) |
| { |
| gw = &niciPentry->gateway; |
| } |
| else |
| { |
| messages::propertyMissing(asyncResp->res, |
| pathString + "/Gateway"); |
| errorInEntry = true; |
| } |
| |
| if (errorInEntry) |
| { |
| return; |
| } |
| |
| if (niciPentry != ipv4Data.cend()) |
| { |
| deleteAndCreateIPv4(ifaceId, niciPentry->id, prefixLength, |
| *gw, *addr, asyncResp); |
| niciPentry = |
| getNextStaticIpEntry(++niciPentry, ipv4Data.cend()); |
| } |
| else |
| { |
| createIPv4(ifaceId, prefixLength, *gateway, *address, |
| asyncResp); |
| } |
| entryIdx++; |
| } |
| else |
| { |
| if (niciPentry == ipv4Data.cend()) |
| { |
| // Requesting a DELETE/DO NOT MODIFY action for an item |
| // that isn't present on the eth(n) interface. Input JSON is |
| // in error, so bail out. |
| if (thisJson.is_null()) |
| { |
| messages::resourceCannotBeDeleted(asyncResp->res); |
| return; |
| } |
| messages::propertyValueFormatError( |
| asyncResp->res, |
| thisJson.dump(2, ' ', true, |
| nlohmann::json::error_handler_t::replace), |
| pathString); |
| return; |
| } |
| |
| if (thisJson.is_null()) |
| { |
| deleteIPv4(ifaceId, niciPentry->id, asyncResp); |
| } |
| if (niciPentry != ipv4Data.cend()) |
| { |
| niciPentry = |
| getNextStaticIpEntry(++niciPentry, ipv4Data.cend()); |
| } |
| entryIdx++; |
| } |
| } |
| } |
| |
| void handleStaticNameServersPatch( |
| const std::string& ifaceId, |
| const std::vector<std::string>& updatedStaticNameServers, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| crow::connections::systemBus->async_method_call( |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| }, |
| "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.EthernetInterface", |
| "StaticNameServers", |
| std::variant<std::vector<std::string>>{updatedStaticNameServers}); |
| } |
| |
| void handleIPv6StaticAddressesPatch( |
| const std::string& ifaceId, const nlohmann::json& input, |
| const boost::container::flat_set<IPv6AddressData>& ipv6Data, |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp) |
| { |
| if (!input.is_array() || input.empty()) |
| { |
| messages::propertyValueTypeError( |
| asyncResp->res, |
| input.dump(2, ' ', true, |
| nlohmann::json::error_handler_t::replace), |
| "IPv6StaticAddresses"); |
| return; |
| } |
| size_t entryIdx = 1; |
| boost::container::flat_set<IPv6AddressData>::const_iterator niciPentry = |
| getNextStaticIpEntry(ipv6Data.cbegin(), ipv6Data.cend()); |
| for (const nlohmann::json& thisJson : input) |
| { |
| std::string pathString = |
| "IPv6StaticAddresses/" + std::to_string(entryIdx); |
| |
| if (!thisJson.is_null() && !thisJson.empty()) |
| { |
| std::optional<std::string> address; |
| std::optional<uint8_t> prefixLength; |
| nlohmann::json thisJsonCopy = thisJson; |
| if (!json_util::readJson(thisJsonCopy, asyncResp->res, |
| "Address", address, "PrefixLength", |
| prefixLength)) |
| { |
| messages::propertyValueFormatError( |
| asyncResp->res, |
| thisJson.dump(2, ' ', true, |
| nlohmann::json::error_handler_t::replace), |
| pathString); |
| return; |
| } |
| |
| const std::string* addr; |
| uint8_t prefix; |
| |
| // Find the address and prefixLength values. Any values that are |
| // not explicitly provided are assumed to be unmodified from the |
| // current state of the interface. Merge existing state into the |
| // current request. |
| if (address) |
| { |
| addr = &(*address); |
| } |
| else if (niciPentry != ipv6Data.end()) |
| { |
| addr = &(niciPentry->address); |
| } |
| else |
| { |
| messages::propertyMissing(asyncResp->res, |
| pathString + "/Address"); |
| return; |
| } |
| |
| if (prefixLength) |
| { |
| prefix = *prefixLength; |
| } |
| else if (niciPentry != ipv6Data.end()) |
| { |
| prefix = niciPentry->prefixLength; |
| } |
| else |
| { |
| messages::propertyMissing(asyncResp->res, |
| pathString + "/PrefixLength"); |
| return; |
| } |
| |
| if (niciPentry != ipv6Data.end()) |
| { |
| deleteAndCreateIPv6(ifaceId, niciPentry->id, prefix, *addr, |
| asyncResp); |
| niciPentry = |
| getNextStaticIpEntry(++niciPentry, ipv6Data.cend()); |
| } |
| else |
| { |
| createIPv6(ifaceId, *prefixLength, *addr, asyncResp); |
| } |
| entryIdx++; |
| } |
| else |
| { |
| if (niciPentry == ipv6Data.end()) |
| { |
| // Requesting a DELETE/DO NOT MODIFY action for an item |
| // that isn't present on the eth(n) interface. Input JSON is |
| // in error, so bail out. |
| if (thisJson.is_null()) |
| { |
| messages::resourceCannotBeDeleted(asyncResp->res); |
| return; |
| } |
| messages::propertyValueFormatError( |
| asyncResp->res, |
| thisJson.dump(2, ' ', true, |
| nlohmann::json::error_handler_t::replace), |
| pathString); |
| return; |
| } |
| |
| if (thisJson.is_null()) |
| { |
| deleteIPv6(ifaceId, niciPentry->id, asyncResp); |
| } |
| if (niciPentry != ipv6Data.cend()) |
| { |
| niciPentry = |
| getNextStaticIpEntry(++niciPentry, ipv6Data.cend()); |
| } |
| entryIdx++; |
| } |
| } |
| } |
| |
| void parseInterfaceData( |
| const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const std::string& ifaceId, const EthernetInterfaceData& ethData, |
| const boost::container::flat_set<IPv4AddressData>& ipv4Data, |
| const boost::container::flat_set<IPv6AddressData>& ipv6Data) |
| { |
| constexpr const std::array<const char*, 1> inventoryForEthernet = { |
| "xyz.openbmc_project.Inventory.Item.Ethernet"}; |
| |
| nlohmann::json& jsonResponse = asyncResp->res.jsonValue; |
| jsonResponse["Id"] = ifaceId; |
| jsonResponse["@odata.id"] = |
| "/redfish/v1/Managers/bmc/EthernetInterfaces/" + ifaceId; |
| jsonResponse["InterfaceEnabled"] = ethData.nicEnabled; |
| |
| auto health = std::make_shared<HealthPopulate>(asyncResp); |
| |
| crow::connections::systemBus->async_method_call( |
| [health](const boost::system::error_code ec, |
| std::vector<std::string>& resp) { |
| if (ec) |
| { |
| return; |
| } |
| |
| health->inventory = std::move(resp); |
| }, |
| "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTreePaths", "/", |
| int32_t(0), inventoryForEthernet); |
| |
| health->populate(); |
| |
| if (ethData.nicEnabled) |
| { |
| jsonResponse["LinkStatus"] = "LinkUp"; |
| jsonResponse["Status"]["State"] = "Enabled"; |
| } |
| else |
| { |
| jsonResponse["LinkStatus"] = "NoLink"; |
| jsonResponse["Status"]["State"] = "Disabled"; |
| } |
| |
| jsonResponse["LinkStatus"] = ethData.linkUp ? "LinkUp" : "LinkDown"; |
| jsonResponse["SpeedMbps"] = ethData.speed; |
| jsonResponse["MACAddress"] = ethData.mac_address; |
| jsonResponse["DHCPv4"]["DHCPEnabled"] = |
| translateDHCPEnabledToBool(ethData.DHCPEnabled, true); |
| jsonResponse["DHCPv4"]["UseNTPServers"] = ethData.NTPEnabled; |
| jsonResponse["DHCPv4"]["UseDNSServers"] = ethData.DNSEnabled; |
| jsonResponse["DHCPv4"]["UseDomainName"] = ethData.HostNameEnabled; |
| |
| jsonResponse["DHCPv6"]["OperatingMode"] = |
| translateDHCPEnabledToBool(ethData.DHCPEnabled, false) ? "Stateful" |
| : "Disabled"; |
| jsonResponse["DHCPv6"]["UseNTPServers"] = ethData.NTPEnabled; |
| jsonResponse["DHCPv6"]["UseDNSServers"] = ethData.DNSEnabled; |
| jsonResponse["DHCPv6"]["UseDomainName"] = ethData.HostNameEnabled; |
| |
| if (!ethData.hostname.empty()) |
| { |
| jsonResponse["HostName"] = ethData.hostname; |
| |
| // When domain name is empty then it means, that it is a network |
| // without domain names, and the host name itself must be treated as |
| // FQDN |
| std::string fqdn = ethData.hostname; |
| if (!ethData.domainnames.empty()) |
| { |
| fqdn += "." + ethData.domainnames[0]; |
| } |
| jsonResponse["FQDN"] = fqdn; |
| } |
| |
| jsonResponse["VLANs"] = { |
| {"@odata.id", "/redfish/v1/Managers/bmc/EthernetInterfaces/" + |
| ifaceId + "/VLANs"}}; |
| |
| jsonResponse["NameServers"] = ethData.nameServers; |
| jsonResponse["StaticNameServers"] = ethData.staticNameServers; |
| |
| nlohmann::json& ipv4Array = jsonResponse["IPv4Addresses"]; |
| nlohmann::json& ipv4StaticArray = jsonResponse["IPv4StaticAddresses"]; |
| ipv4Array = nlohmann::json::array(); |
| ipv4StaticArray = nlohmann::json::array(); |
| for (auto& ipv4Config : ipv4Data) |
| { |
| |
| std::string gatewayStr = ipv4Config.gateway; |
| if (gatewayStr.empty()) |
| { |
| gatewayStr = "0.0.0.0"; |
| } |
| |
| ipv4Array.push_back({{"AddressOrigin", ipv4Config.origin}, |
| {"SubnetMask", ipv4Config.netmask}, |
| {"Address", ipv4Config.address}, |
| {"Gateway", gatewayStr}}); |
| if (ipv4Config.origin == "Static") |
| { |
| ipv4StaticArray.push_back({{"AddressOrigin", ipv4Config.origin}, |
| {"SubnetMask", ipv4Config.netmask}, |
| {"Address", ipv4Config.address}, |
| {"Gateway", gatewayStr}}); |
| } |
| } |
| |
| std::string ipv6GatewayStr = ethData.ipv6_default_gateway; |
| if (ipv6GatewayStr.empty()) |
| { |
| ipv6GatewayStr = "0:0:0:0:0:0:0:0"; |
| } |
| |
| jsonResponse["IPv6DefaultGateway"] = ipv6GatewayStr; |
| |
| nlohmann::json& ipv6Array = jsonResponse["IPv6Addresses"]; |
| nlohmann::json& ipv6StaticArray = jsonResponse["IPv6StaticAddresses"]; |
| ipv6Array = nlohmann::json::array(); |
| ipv6StaticArray = nlohmann::json::array(); |
| nlohmann::json& ipv6AddrPolicyTable = |
| jsonResponse["IPv6AddressPolicyTable"]; |
| ipv6AddrPolicyTable = nlohmann::json::array(); |
| for (auto& ipv6Config : ipv6Data) |
| { |
| ipv6Array.push_back({{"Address", ipv6Config.address}, |
| {"PrefixLength", ipv6Config.prefixLength}, |
| {"AddressOrigin", ipv6Config.origin}, |
| {"AddressState", nullptr}}); |
| if (ipv6Config.origin == "Static") |
| { |
| ipv6StaticArray.push_back( |
| {{"Address", ipv6Config.address}, |
| {"PrefixLength", ipv6Config.prefixLength}, |
| {"AddressOrigin", ipv6Config.origin}, |
| {"AddressState", nullptr}}); |
| } |
| } |
| } |
| |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request&, |
| const std::vector<std::string>& params) override |
| { |
| if (params.size() != 1) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| getEthernetIfaceData( |
| params[0], |
| [this, asyncResp, ifaceId{std::string(params[0])}]( |
| const bool& success, const EthernetInterfaceData& ethData, |
| const boost::container::flat_set<IPv4AddressData>& ipv4Data, |
| const boost::container::flat_set<IPv6AddressData>& ipv6Data) { |
| if (!success) |
| { |
| // TODO(Pawel)consider distinguish between non existing |
| // object, and other errors |
| messages::resourceNotFound(asyncResp->res, |
| "EthernetInterface", ifaceId); |
| return; |
| } |
| |
| asyncResp->res.jsonValue["@odata.type"] = |
| "#EthernetInterface.v1_4_1.EthernetInterface"; |
| asyncResp->res.jsonValue["Name"] = "Manager Ethernet Interface"; |
| asyncResp->res.jsonValue["Description"] = |
| "Management Network Interface"; |
| |
| parseInterfaceData(asyncResp, ifaceId, ethData, ipv4Data, |
| ipv6Data); |
| }); |
| } |
| |
| void doPatch(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request& req, |
| const std::vector<std::string>& params) override |
| { |
| |
| if (params.size() != 1) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| const std::string& ifaceId = params[0]; |
| |
| std::optional<std::string> hostname; |
| std::optional<std::string> fqdn; |
| std::optional<std::string> macAddress; |
| std::optional<std::string> ipv6DefaultGateway; |
| std::optional<nlohmann::json> ipv4StaticAddresses; |
| std::optional<nlohmann::json> ipv6StaticAddresses; |
| std::optional<std::vector<std::string>> staticNameServers; |
| std::optional<nlohmann::json> dhcpv4; |
| std::optional<nlohmann::json> dhcpv6; |
| std::optional<bool> interfaceEnabled; |
| DHCPParameters v4dhcpParms; |
| DHCPParameters v6dhcpParms; |
| |
| if (!json_util::readJson( |
| req, asyncResp->res, "HostName", hostname, "FQDN", fqdn, |
| "IPv4StaticAddresses", ipv4StaticAddresses, "MACAddress", |
| macAddress, "StaticNameServers", staticNameServers, |
| "IPv6DefaultGateway", ipv6DefaultGateway, "IPv6StaticAddresses", |
| ipv6StaticAddresses, "DHCPv4", dhcpv4, "DHCPv6", dhcpv6, |
| "InterfaceEnabled", interfaceEnabled)) |
| { |
| return; |
| } |
| if (dhcpv4) |
| { |
| if (!json_util::readJson(*dhcpv4, asyncResp->res, "DHCPEnabled", |
| v4dhcpParms.dhcpv4Enabled, "UseDNSServers", |
| v4dhcpParms.useDNSServers, "UseNTPServers", |
| v4dhcpParms.useNTPServers, "UseDomainName", |
| v4dhcpParms.useUseDomainName)) |
| { |
| return; |
| } |
| } |
| |
| if (dhcpv6) |
| { |
| if (!json_util::readJson(*dhcpv6, asyncResp->res, "OperatingMode", |
| v6dhcpParms.dhcpv6OperatingMode, |
| "UseDNSServers", v6dhcpParms.useDNSServers, |
| "UseNTPServers", v6dhcpParms.useNTPServers, |
| "UseDomainName", |
| v6dhcpParms.useUseDomainName)) |
| { |
| return; |
| } |
| } |
| |
| // Get single eth interface data, and call the below callback for |
| // JSON preparation |
| getEthernetIfaceData( |
| ifaceId, |
| [this, asyncResp, ifaceId, hostname = std::move(hostname), |
| fqdn = std::move(fqdn), macAddress = std::move(macAddress), |
| ipv4StaticAddresses = std::move(ipv4StaticAddresses), |
| ipv6DefaultGateway = std::move(ipv6DefaultGateway), |
| ipv6StaticAddresses = std::move(ipv6StaticAddresses), |
| staticNameServers = std::move(staticNameServers), |
| dhcpv4 = std::move(dhcpv4), dhcpv6 = std::move(dhcpv6), |
| v4dhcpParms = std::move(v4dhcpParms), |
| v6dhcpParms = std::move(v6dhcpParms), interfaceEnabled]( |
| const bool& success, const EthernetInterfaceData& ethData, |
| const boost::container::flat_set<IPv4AddressData>& ipv4Data, |
| const boost::container::flat_set<IPv6AddressData>& ipv6Data) { |
| if (!success) |
| { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing |
| // object, and other errors |
| messages::resourceNotFound(asyncResp->res, |
| "Ethernet Interface", ifaceId); |
| return; |
| } |
| |
| if (dhcpv4 || dhcpv6) |
| { |
| handleDHCPPatch(ifaceId, ethData, v4dhcpParms, v6dhcpParms, |
| asyncResp); |
| } |
| |
| if (hostname) |
| { |
| handleHostnamePatch(*hostname, asyncResp); |
| } |
| |
| if (fqdn) |
| { |
| handleFqdnPatch(ifaceId, *fqdn, asyncResp); |
| } |
| |
| if (macAddress) |
| { |
| handleMACAddressPatch(ifaceId, *macAddress, asyncResp); |
| } |
| |
| if (ipv4StaticAddresses) |
| { |
| // TODO(ed) for some reason the capture of ipv4Addresses |
| // above is returning a const value, not a non-const |
| // value. This doesn't really work for us, as we need to |
| // be able to efficiently move out the intermedia |
| // nlohmann::json objects. This makes a copy of the |
| // structure, and operates on that, but could be done |
| // more efficiently |
| nlohmann::json ipv4Static = *ipv4StaticAddresses; |
| handleIPv4StaticPatch(ifaceId, ipv4Static, ipv4Data, |
| asyncResp); |
| } |
| |
| if (staticNameServers) |
| { |
| handleStaticNameServersPatch(ifaceId, *staticNameServers, |
| asyncResp); |
| } |
| |
| if (ipv6DefaultGateway) |
| { |
| messages::propertyNotWritable(asyncResp->res, |
| "IPv6DefaultGateway"); |
| } |
| |
| if (ipv6StaticAddresses) |
| { |
| nlohmann::json ipv6Static = *ipv6StaticAddresses; |
| handleIPv6StaticAddressesPatch(ifaceId, ipv6Static, |
| ipv6Data, asyncResp); |
| } |
| |
| if (interfaceEnabled) |
| { |
| setEthernetInterfaceBoolProperty( |
| ifaceId, "NICEnabled", *interfaceEnabled, asyncResp); |
| } |
| }); |
| } |
| }; |
| |
| /** |
| * VlanNetworkInterface derived class for delivering VLANNetworkInterface |
| * Schema |
| */ |
| class VlanNetworkInterface : public Node |
| { |
| public: |
| /* |
| * Default Constructor |
| */ |
| VlanNetworkInterface(App& app) : |
| Node(app, |
| "/redfish/v1/Managers/bmc/EthernetInterfaces/<str>/VLANs/<str>/", |
| std::string(), std::string()) |
| { |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| private: |
| void parseInterfaceData(nlohmann::json& jsonResponse, |
| const std::string& parentIfaceId, |
| const std::string& ifaceId, |
| const EthernetInterfaceData& ethData) |
| { |
| // Fill out obvious data... |
| jsonResponse["Id"] = ifaceId; |
| jsonResponse["@odata.id"] = |
| "/redfish/v1/Managers/bmc/EthernetInterfaces/" + parentIfaceId + |
| "/VLANs/" + ifaceId; |
| |
| jsonResponse["VLANEnable"] = true; |
| if (!ethData.vlan_id.empty()) |
| { |
| jsonResponse["VLANId"] = ethData.vlan_id.back(); |
| } |
| } |
| |
| bool verifyNames(const std::string& parent, const std::string& iface) |
| { |
| if (!boost::starts_with(iface, parent + "_")) |
| { |
| return false; |
| } |
| return true; |
| } |
| |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request&, |
| const std::vector<std::string>& params) override |
| { |
| // TODO(Pawel) this shall be parameterized call (two params) to get |
| // EthernetInterfaces for any Manager, not only hardcoded 'openbmc'. |
| // Check if there is required param, truly entering this shall be |
| // impossible. |
| if (params.size() != 2) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| const std::string& parentIfaceId = params[0]; |
| const std::string& ifaceId = params[1]; |
| asyncResp->res.jsonValue["@odata.type"] = |
| "#VLanNetworkInterface.v1_1_0.VLanNetworkInterface"; |
| asyncResp->res.jsonValue["Name"] = "VLAN Network Interface"; |
| |
| if (!verifyNames(parentIfaceId, ifaceId)) |
| { |
| return; |
| } |
| |
| // Get single eth interface data, and call the below callback for |
| // JSON preparation |
| getEthernetIfaceData( |
| params[1], |
| [this, asyncResp, parentIfaceId{std::string(params[0])}, |
| ifaceId{std::string(params[1])}]( |
| const bool& success, const EthernetInterfaceData& ethData, |
| const boost::container::flat_set<IPv4AddressData>&, |
| const boost::container::flat_set<IPv6AddressData>&) { |
| if (success && ethData.vlan_id.size() != 0) |
| { |
| parseInterfaceData(asyncResp->res.jsonValue, parentIfaceId, |
| ifaceId, ethData); |
| } |
| else |
| { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing |
| // object, and other errors |
| messages::resourceNotFound( |
| asyncResp->res, "VLAN Network Interface", ifaceId); |
| } |
| }); |
| } |
| |
| void doPatch(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request& req, |
| const std::vector<std::string>& params) override |
| { |
| |
| if (params.size() != 2) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| const std::string& parentIfaceId = params[0]; |
| const std::string& ifaceId = params[1]; |
| |
| if (!verifyNames(parentIfaceId, ifaceId)) |
| { |
| messages::resourceNotFound(asyncResp->res, "VLAN Network Interface", |
| ifaceId); |
| return; |
| } |
| |
| bool vlanEnable = false; |
| uint32_t vlanId = 0; |
| |
| if (!json_util::readJson(req, asyncResp->res, "VLANEnable", vlanEnable, |
| "VLANId", vlanId)) |
| { |
| return; |
| } |
| |
| // Get single eth interface data, and call the below callback for |
| // JSON preparation |
| getEthernetIfaceData( |
| params[1], |
| [asyncResp, parentIfaceId{std::string(params[0])}, |
| ifaceId{std::string(params[1])}, &vlanEnable, |
| &vlanId](const bool& success, const EthernetInterfaceData& ethData, |
| const boost::container::flat_set<IPv4AddressData>&, |
| const boost::container::flat_set<IPv6AddressData>&) { |
| if (success && !ethData.vlan_id.empty()) |
| { |
| auto callback = |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }; |
| |
| if (vlanEnable == true) |
| { |
| crow::connections::systemBus->async_method_call( |
| std::move(callback), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network/" + ifaceId, |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Network.VLAN", "Id", |
| std::variant<uint32_t>(vlanId)); |
| } |
| else |
| { |
| BMCWEB_LOG_DEBUG << "vlanEnable is false. Deleting the " |
| "vlan interface"; |
| crow::connections::systemBus->async_method_call( |
| std::move(callback), "xyz.openbmc_project.Network", |
| std::string("/xyz/openbmc_project/network/") + |
| ifaceId, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| } |
| } |
| else |
| { |
| // TODO(Pawel)consider distinguish between non existing |
| // object, and other errors |
| messages::resourceNotFound( |
| asyncResp->res, "VLAN Network Interface", ifaceId); |
| return; |
| } |
| }); |
| } |
| |
| void doDelete(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request&, |
| const std::vector<std::string>& params) override |
| { |
| if (params.size() != 2) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| const std::string& parentIfaceId = params[0]; |
| const std::string& ifaceId = params[1]; |
| |
| if (!verifyNames(parentIfaceId, ifaceId)) |
| { |
| messages::resourceNotFound(asyncResp->res, "VLAN Network Interface", |
| ifaceId); |
| return; |
| } |
| |
| // Get single eth interface data, and call the below callback for |
| // JSON preparation |
| getEthernetIfaceData( |
| params[1], |
| [asyncResp, parentIfaceId{std::string(params[0])}, |
| ifaceId{std::string(params[1])}]( |
| const bool& success, const EthernetInterfaceData& ethData, |
| const boost::container::flat_set<IPv4AddressData>&, |
| const boost::container::flat_set<IPv6AddressData>&) { |
| if (success && !ethData.vlan_id.empty()) |
| { |
| auto callback = |
| [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| messages::internalError(asyncResp->res); |
| } |
| }; |
| crow::connections::systemBus->async_method_call( |
| std::move(callback), "xyz.openbmc_project.Network", |
| std::string("/xyz/openbmc_project/network/") + ifaceId, |
| "xyz.openbmc_project.Object.Delete", "Delete"); |
| } |
| else |
| { |
| // ... otherwise return error |
| // TODO(Pawel)consider distinguish between non existing |
| // object, and other errors |
| messages::resourceNotFound( |
| asyncResp->res, "VLAN Network Interface", ifaceId); |
| } |
| }); |
| } |
| }; |
| |
| /** |
| * VlanNetworkInterfaceCollection derived class for delivering |
| * VLANNetworkInterface Collection Schema |
| */ |
| class VlanNetworkInterfaceCollection : public Node |
| { |
| public: |
| VlanNetworkInterfaceCollection(App& app) : |
| Node(app, "/redfish/v1/Managers/bmc/EthernetInterfaces/<str>/VLANs/", |
| std::string()) |
| { |
| entityPrivileges = { |
| {boost::beast::http::verb::get, {{"Login"}}}, |
| {boost::beast::http::verb::head, {{"Login"}}}, |
| {boost::beast::http::verb::patch, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::put, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::delete_, {{"ConfigureComponents"}}}, |
| {boost::beast::http::verb::post, {{"ConfigureComponents"}}}}; |
| } |
| |
| private: |
| /** |
| * Functions triggers appropriate requests on DBus |
| */ |
| void doGet(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request&, |
| const std::vector<std::string>& params) override |
| { |
| if (params.size() != 1) |
| { |
| // This means there is a problem with the router |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| const std::string& rootInterfaceName = params[0]; |
| |
| // Get eth interface list, and call the below callback for JSON |
| // preparation |
| getEthernetIfaceList( |
| [asyncResp, rootInterfaceName{std::string(rootInterfaceName)}]( |
| const bool& success, |
| const boost::container::flat_set<std::string>& ifaceList) { |
| if (!success) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| |
| if (ifaceList.find(rootInterfaceName) == ifaceList.end()) |
| { |
| messages::resourceNotFound(asyncResp->res, |
| "VLanNetworkInterfaceCollection", |
| rootInterfaceName); |
| return; |
| } |
| |
| asyncResp->res.jsonValue["@odata.type"] = |
| "#VLanNetworkInterfaceCollection." |
| "VLanNetworkInterfaceCollection"; |
| asyncResp->res.jsonValue["Name"] = |
| "VLAN Network Interface Collection"; |
| |
| nlohmann::json ifaceArray = nlohmann::json::array(); |
| |
| for (const std::string& ifaceItem : ifaceList) |
| { |
| if (boost::starts_with(ifaceItem, rootInterfaceName + "_")) |
| { |
| std::string path = |
| "/redfish/v1/Managers/bmc/EthernetInterfaces/"; |
| path += rootInterfaceName; |
| path += "/VLANs/"; |
| path += ifaceItem; |
| ifaceArray.push_back({{"@odata.id", std::move(path)}}); |
| } |
| } |
| |
| asyncResp->res.jsonValue["Members@odata.count"] = |
| ifaceArray.size(); |
| asyncResp->res.jsonValue["Members"] = std::move(ifaceArray); |
| asyncResp->res.jsonValue["@odata.id"] = |
| "/redfish/v1/Managers/bmc/EthernetInterfaces/" + |
| rootInterfaceName + "/VLANs"; |
| }); |
| } |
| |
| void doPost(const std::shared_ptr<bmcweb::AsyncResp>& asyncResp, |
| const crow::Request& req, |
| const std::vector<std::string>& params) override |
| { |
| if (params.size() != 1) |
| { |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| bool vlanEnable = false; |
| uint32_t vlanId = 0; |
| if (!json_util::readJson(req, asyncResp->res, "VLANId", vlanId, |
| "VLANEnable", vlanEnable)) |
| { |
| return; |
| } |
| // Need both vlanId and vlanEnable to service this request |
| if (!vlanId) |
| { |
| messages::propertyMissing(asyncResp->res, "VLANId"); |
| } |
| if (!vlanEnable) |
| { |
| messages::propertyMissing(asyncResp->res, "VLANEnable"); |
| } |
| if (static_cast<bool>(vlanId) ^ vlanEnable) |
| { |
| return; |
| } |
| |
| const std::string& rootInterfaceName = params[0]; |
| auto callback = [asyncResp](const boost::system::error_code ec) { |
| if (ec) |
| { |
| // TODO(ed) make more consistent error messages based on |
| // phosphor-network responses |
| messages::internalError(asyncResp->res); |
| return; |
| } |
| messages::created(asyncResp->res); |
| }; |
| crow::connections::systemBus->async_method_call( |
| std::move(callback), "xyz.openbmc_project.Network", |
| "/xyz/openbmc_project/network", |
| "xyz.openbmc_project.Network.VLAN.Create", "VLAN", |
| rootInterfaceName, vlanId); |
| } |
| }; |
| } // namespace redfish |