| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| #pragma once |
| |
| #include <math.h> |
| #include <dbus_singleton.hpp> |
| #include <boost/algorithm/string/predicate.hpp> |
| #include <boost/algorithm/string/split.hpp> |
| #include <boost/container/flat_map.hpp> |
| #include <boost/range/algorithm/replace_copy_if.hpp> |
| |
| namespace redfish { |
| |
| constexpr const char* DBUS_SENSOR_PREFIX = "/xyz/openbmc_project/sensors/"; |
| |
| using GetSubTreeType = std::vector< |
| std::pair<std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>>; |
| |
| using SensorVariant = sdbusplus::message::variant<int64_t, double>; |
| |
| using ManagedObjectsVectorType = std::vector<std::pair< |
| sdbusplus::message::object_path, |
| boost::container::flat_map< |
| std::string, boost::container::flat_map<std::string, SensorVariant>>>>; |
| |
| /** |
| * SensorsAsyncResp |
| * Gathers data needed for response processing after async calls are done |
| */ |
| class SensorsAsyncResp { |
| public: |
| SensorsAsyncResp(crow::Response& response, const std::string& chassisId, |
| const std::initializer_list<const char*> types) |
| : res(response), chassisId(chassisId), types(types) { |
| res.jsonValue["@odata.id"] = |
| "/redfish/v1/Chassis/" + chassisId + "/Thermal"; |
| } |
| |
| ~SensorsAsyncResp() { |
| if (res.result() == boost::beast::http::status::internal_server_error) { |
| // Reset the json object to clear out any data that made it in before the |
| // error happened |
| // todo(ed) handle error condition with proper code |
| res.jsonValue = nlohmann::json::object(); |
| } |
| res.end(); |
| } |
| |
| void setErrorStatus() { |
| res.result(boost::beast::http::status::internal_server_error); |
| } |
| |
| crow::Response& res; |
| std::string chassisId{}; |
| const std::vector<const char*> types; |
| }; |
| |
| /** |
| * @brief Creates connections necessary for chassis sensors |
| * @param SensorsAsyncResp Pointer to object holding response data |
| * @param sensorNames Sensors retrieved from chassis |
| * @param callback Callback for processing gathered connections |
| */ |
| template <typename Callback> |
| void getConnections(std::shared_ptr<SensorsAsyncResp> SensorsAsyncResp, |
| const boost::container::flat_set<std::string>& sensorNames, |
| Callback&& callback) { |
| BMCWEB_LOG_DEBUG << "getConnections enter"; |
| const std::string path = "/xyz/openbmc_project/sensors"; |
| const std::array<std::string, 1> interfaces = { |
| "xyz.openbmc_project.Sensor.Value"}; |
| |
| // Response handler for parsing objects subtree |
| auto respHandler = |
| [ callback{std::move(callback)}, SensorsAsyncResp, sensorNames ]( |
| const boost::system::error_code ec, const GetSubTreeType& subtree) { |
| BMCWEB_LOG_DEBUG << "getConnections resp_handler enter"; |
| if (ec) { |
| SensorsAsyncResp->setErrorStatus(); |
| BMCWEB_LOG_ERROR << "getConnections resp_handler: Dbus error " << ec; |
| return; |
| } |
| |
| BMCWEB_LOG_DEBUG << "Found " << subtree.size() << " subtrees"; |
| |
| // Make unique list of connections only for requested sensor types and |
| // found in the chassis |
| boost::container::flat_set<std::string> connections; |
| // Intrinsic to avoid malloc. Most systems will have < 8 sensor producers |
| connections.reserve(8); |
| |
| BMCWEB_LOG_DEBUG << "sensorNames list count: " << sensorNames.size(); |
| for (const std::string& tsensor : sensorNames) { |
| BMCWEB_LOG_DEBUG << "Sensor to find: " << tsensor; |
| } |
| |
| for (const std::pair< |
| std::string, |
| std::vector<std::pair<std::string, std::vector<std::string>>>>& |
| object : subtree) { |
| for (const char* type : SensorsAsyncResp->types) { |
| if (boost::starts_with(object.first, type)) { |
| auto lastPos = object.first.rfind('/'); |
| if (lastPos != std::string::npos) { |
| std::string sensorName = object.first.substr(lastPos + 1); |
| |
| if (sensorNames.find(sensorName) != sensorNames.end()) { |
| // For each Connection name |
| for (const std::pair<std::string, std::vector<std::string>>& |
| objData : object.second) { |
| BMCWEB_LOG_DEBUG << "Adding connection: " << objData.first; |
| connections.insert(objData.first); |
| } |
| } |
| } |
| break; |
| } |
| } |
| } |
| BMCWEB_LOG_DEBUG << "Found " << connections.size() << " connections"; |
| callback(std::move(connections)); |
| BMCWEB_LOG_DEBUG << "getConnections resp_handler exit"; |
| }; |
| |
| // Make call to ObjectMapper to find all sensors objects |
| crow::connections::systemBus->async_method_call( |
| std::move(respHandler), "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", "xyz.openbmc_project.ObjectMapper", |
| "GetSubTree", path, 2, interfaces); |
| BMCWEB_LOG_DEBUG << "getConnections exit"; |
| } |
| |
| /** |
| * @brief Retrieves requested chassis sensors and redundancy data from DBus . |
| * @param SensorsAsyncResp Pointer to object holding response data |
| * @param callback Callback for next step in gathered sensor processing |
| */ |
| template <typename Callback> |
| void getChassis(std::shared_ptr<SensorsAsyncResp> SensorsAsyncResp, |
| Callback&& callback) { |
| BMCWEB_LOG_DEBUG << "getChassis enter"; |
| // Process response from EntityManager and extract chassis data |
| auto respHandler = [ callback{std::move(callback)}, SensorsAsyncResp ]( |
| const boost::system::error_code ec, ManagedObjectsVectorType& resp) { |
| BMCWEB_LOG_DEBUG << "getChassis respHandler enter"; |
| if (ec) { |
| BMCWEB_LOG_ERROR << "getChassis respHandler DBUS error: " << ec; |
| SensorsAsyncResp->setErrorStatus(); |
| return; |
| } |
| boost::container::flat_set<std::string> sensorNames; |
| |
| // SensorsAsyncResp->chassisId |
| bool foundChassis = false; |
| std::vector<std::string> split; |
| // Reserve space for |
| // /xyz/openbmc_project/inventory/<name>/<subname> + 3 subnames |
| split.reserve(8); |
| |
| for (const auto& objDictEntry : resp) { |
| const std::string& objectPath = |
| static_cast<const std::string&>(objDictEntry.first); |
| boost::algorithm::split(split, objectPath, boost::is_any_of("/")); |
| if (split.size() < 2) { |
| BMCWEB_LOG_ERROR << "Got path that isn't long enough " << objectPath; |
| split.clear(); |
| continue; |
| } |
| const std::string& sensorName = split.end()[-1]; |
| const std::string& chassisName = split.end()[-2]; |
| |
| if (chassisName != SensorsAsyncResp->chassisId) { |
| split.clear(); |
| continue; |
| } |
| BMCWEB_LOG_DEBUG << "New sensor: " << sensorName; |
| foundChassis = true; |
| sensorNames.emplace(sensorName); |
| split.clear(); |
| }; |
| BMCWEB_LOG_DEBUG << "Found " << sensorNames.size() << " Sensor names"; |
| |
| if (!foundChassis) { |
| BMCWEB_LOG_INFO << "Unable to find chassis named " |
| << SensorsAsyncResp->chassisId; |
| SensorsAsyncResp->res.result(boost::beast::http::status::not_found); |
| } else { |
| callback(sensorNames); |
| } |
| BMCWEB_LOG_DEBUG << "getChassis respHandler exit"; |
| }; |
| |
| // Make call to EntityManager to find all chassis objects |
| crow::connections::systemBus->async_method_call( |
| respHandler, "xyz.openbmc_project.EntityManager", "/", |
| "org.freedesktop.DBus.ObjectManager", "GetManagedObjects"); |
| BMCWEB_LOG_DEBUG << "getChassis exit"; |
| } |
| |
| /** |
| * @brief Builds a json sensor representation of a sensor. |
| * @param sensorName The name of the sensor to be built |
| * @param sensorType The type (temperature, fan_tach, etc) of the sensor to |
| * build |
| * @param interfacesDict A dictionary of the interfaces and properties of said |
| * interfaces to be built from |
| * @param sensor_json The json object to fill |
| */ |
| void objectInterfacesToJson( |
| const std::string& sensorName, const std::string& sensorType, |
| const boost::container::flat_map< |
| std::string, boost::container::flat_map<std::string, SensorVariant>>& |
| interfacesDict, |
| nlohmann::json& sensor_json) { |
| // We need a value interface before we can do anything with it |
| auto valueIt = interfacesDict.find("xyz.openbmc_project.Sensor.Value"); |
| if (valueIt == interfacesDict.end()) { |
| BMCWEB_LOG_ERROR << "Sensor doesn't have a value interface"; |
| return; |
| } |
| |
| // Assume values exist as is (10^0 == 1) if no scale exists |
| int64_t scaleMultiplier = 0; |
| |
| auto scaleIt = valueIt->second.find("Scale"); |
| // If a scale exists, pull value as int64, and use the scaling. |
| if (scaleIt != valueIt->second.end()) { |
| const int64_t* int64Value = mapbox::getPtr<const int64_t>(scaleIt->second); |
| if (int64Value != nullptr) { |
| scaleMultiplier = *int64Value; |
| } |
| } |
| |
| sensor_json["MemberId"] = sensorName; |
| sensor_json["Name"] = sensorName; |
| sensor_json["Status"]["State"] = "Enabled"; |
| sensor_json["Status"]["Health"] = "OK"; |
| |
| // Parameter to set to override the type we get from dbus, and force it to |
| // int, regardless of what is available. This is used for schemas like fan, |
| // that require integers, not floats. |
| bool forceToInt = false; |
| |
| const char* unit = "Reading"; |
| if (sensorType == "temperature") { |
| unit = "ReadingCelsius"; |
| sensor_json["@odata.type"] = "#Thermal.v1_3_0.Temperature"; |
| // TODO(ed) Documentation says that path should be type fan_tach, |
| // implementation seems to implement fan |
| } else if (sensorType == "fan" || sensorType == "fan_tach") { |
| unit = "Reading"; |
| sensor_json["ReadingUnits"] = "RPM"; |
| sensor_json["@odata.type"] = "#Thermal.v1_3_0.Fan"; |
| forceToInt = true; |
| } else if (sensorType == "voltage") { |
| unit = "ReadingVolts"; |
| sensor_json["@odata.type"] = "#Power.v1_0_0.Voltage"; |
| } else { |
| BMCWEB_LOG_ERROR << "Redfish cannot map object type for " << sensorName; |
| return; |
| } |
| // Map of dbus interface name, dbus property name and redfish property_name |
| std::vector<std::tuple<const char*, const char*, const char*>> properties; |
| properties.reserve(7); |
| |
| properties.emplace_back("xyz.openbmc_project.Sensor.Value", "Value", unit); |
| properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Warning", |
| "WarningHigh", "UpperThresholdNonCritical"); |
| properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Warning", |
| "WarningLow", "LowerThresholdNonCritical"); |
| properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Critical", |
| "CriticalHigh", "UpperThresholdCritical"); |
| properties.emplace_back("xyz.openbmc_project.Sensor.Threshold.Critical", |
| "CriticalLow", "LowerThresholdCritical"); |
| |
| if (sensorType == "temperature") { |
| properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MinValue", |
| "MinReadingRangeTemp"); |
| properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MaxValue", |
| "MaxReadingRangeTemp"); |
| } else { |
| properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MinValue", |
| "MinReadingRange"); |
| properties.emplace_back("xyz.openbmc_project.Sensor.Value", "MaxValue", |
| "MaxReadingRange"); |
| } |
| |
| for (const std::tuple<const char*, const char*, const char*>& p : |
| properties) { |
| auto interfaceProperties = interfacesDict.find(std::get<0>(p)); |
| if (interfaceProperties != interfacesDict.end()) { |
| auto valueIt = interfaceProperties->second.find(std::get<1>(p)); |
| if (valueIt != interfaceProperties->second.end()) { |
| const SensorVariant& valueVariant = valueIt->second; |
| nlohmann::json& valueIt = sensor_json[std::get<2>(p)]; |
| |
| // Attempt to pull the int64 directly |
| const int64_t* int64Value = mapbox::getPtr<const int64_t>(valueVariant); |
| |
| if (int64Value != nullptr) { |
| if (forceToInt || scaleMultiplier >= 0) { |
| valueIt = *int64Value * std::pow(10, scaleMultiplier); |
| } else { |
| valueIt = *int64Value * |
| std::pow(10, static_cast<double>(scaleMultiplier)); |
| } |
| } |
| // Attempt to pull the float directly |
| const double* doubleValue = mapbox::getPtr<const double>(valueVariant); |
| |
| if (doubleValue != nullptr) { |
| if (!forceToInt) { |
| valueIt = *doubleValue * |
| std::pow(10, static_cast<double>(scaleMultiplier)); |
| } else { |
| valueIt = static_cast<int64_t>(*doubleValue * |
| std::pow(10, scaleMultiplier)); |
| } |
| } |
| } |
| } |
| } |
| BMCWEB_LOG_DEBUG << "Added sensor " << sensorName; |
| } |
| |
| /** |
| * @brief Entry point for retrieving sensors data related to requested |
| * chassis. |
| * @param SensorsAsyncResp Pointer to object holding response data |
| */ |
| void getChassisData(std::shared_ptr<SensorsAsyncResp> SensorsAsyncResp) { |
| BMCWEB_LOG_DEBUG << "getChassisData enter"; |
| auto getChassisCb = [&, SensorsAsyncResp]( |
| boost::container::flat_set<std::string>& |
| sensorNames) { |
| BMCWEB_LOG_DEBUG << "getChassisCb enter"; |
| auto getConnectionCb = |
| [&, SensorsAsyncResp, sensorNames]( |
| const boost::container::flat_set<std::string>& connections) { |
| BMCWEB_LOG_DEBUG << "getConnectionCb enter"; |
| // Get managed objects from all services exposing sensors |
| for (const std::string& connection : connections) { |
| // Response handler to process managed objects |
| auto getManagedObjectsCb = [&, SensorsAsyncResp, sensorNames]( |
| const boost::system::error_code ec, |
| ManagedObjectsVectorType& resp) { |
| BMCWEB_LOG_DEBUG << "getManagedObjectsCb enter"; |
| if (ec) { |
| BMCWEB_LOG_ERROR << "getManagedObjectsCb DBUS error: " << ec; |
| SensorsAsyncResp->setErrorStatus(); |
| return; |
| } |
| // Go through all objects and update response with |
| // sensor data |
| for (const auto& objDictEntry : resp) { |
| const std::string& objPath = |
| static_cast<const std::string&>(objDictEntry.first); |
| BMCWEB_LOG_DEBUG << "getManagedObjectsCb parsing object " |
| << objPath; |
| |
| std::vector<std::string> split; |
| // Reserve space for |
| // /xyz/openbmc_project/sensors/<name>/<subname> |
| split.reserve(6); |
| boost::algorithm::split(split, objPath, boost::is_any_of("/")); |
| if (split.size() < 6) { |
| BMCWEB_LOG_ERROR << "Got path that isn't long enough " |
| << objPath; |
| continue; |
| } |
| // These indexes aren't intuitive, as boost::split puts an empty |
| // string at the beggining |
| const std::string& sensorType = split[4]; |
| const std::string& sensorName = split[5]; |
| BMCWEB_LOG_DEBUG << "sensorName " << sensorName |
| << " sensorType " << sensorType; |
| if (sensorNames.find(sensorName) == sensorNames.end()) { |
| BMCWEB_LOG_ERROR << sensorName << " not in sensor list "; |
| continue; |
| } |
| |
| const char* fieldName = nullptr; |
| if (sensorType == "temperature") { |
| fieldName = "Temperatures"; |
| } else if (sensorType == "fan" || sensorType == "fan_tach") { |
| fieldName = "Fans"; |
| } else if (sensorType == "voltage") { |
| fieldName = "Voltages"; |
| } else if (sensorType == "current") { |
| fieldName = "PowerSupply"; |
| } else if (sensorType == "power") { |
| fieldName = "PowerSupply"; |
| } else { |
| BMCWEB_LOG_ERROR << "Unsure how to handle sensorType " |
| << sensorType; |
| continue; |
| } |
| |
| nlohmann::json& tempArray = |
| SensorsAsyncResp->res.jsonValue[fieldName]; |
| |
| // Create the array if it doesn't yet exist |
| if (tempArray.is_array() == false) { |
| tempArray = nlohmann::json::array(); |
| } |
| |
| tempArray.push_back( |
| {{"@odata.id", "/redfish/v1/Chassis/" + |
| SensorsAsyncResp->chassisId + |
| "/Thermal#/" + sensorName}}); |
| nlohmann::json& sensorJson = tempArray.back(); |
| objectInterfacesToJson(sensorName, sensorType, |
| objDictEntry.second, sensorJson); |
| } |
| BMCWEB_LOG_DEBUG << "getManagedObjectsCb exit"; |
| }; |
| crow::connections::systemBus->async_method_call( |
| getManagedObjectsCb, connection, "/", |
| "org.freedesktop.DBus.ObjectManager", "GetManagedObjects"); |
| }; |
| BMCWEB_LOG_DEBUG << "getConnectionCb exit"; |
| }; |
| // get connections and then pass it to get sensors |
| getConnections(SensorsAsyncResp, sensorNames, std::move(getConnectionCb)); |
| BMCWEB_LOG_DEBUG << "getChassisCb exit"; |
| }; |
| |
| // get chassis information related to sensors |
| getChassis(SensorsAsyncResp, std::move(getChassisCb)); |
| BMCWEB_LOG_DEBUG << "getChassisData exit"; |
| }; |
| |
| } // namespace redfish |