| /* |
| * Mailbox Control Implementation |
| * |
| * Copyright 2017 IBM |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| */ |
| |
| #define _GNU_SOURCE |
| #include <assert.h> |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <getopt.h> |
| #include <limits.h> |
| #include <poll.h> |
| #include <stdbool.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <syslog.h> |
| #include <signal.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <sys/stat.h> |
| #include <sys/timerfd.h> |
| #include <sys/types.h> |
| #include <time.h> |
| #include <unistd.h> |
| #include <inttypes.h> |
| |
| #include <systemd/sd-bus.h> |
| |
| #include "config.h" |
| #include "dbus.h" |
| |
| #define USAGE \ |
| "\nUsage: %s [--silent | -s] <command> [args]\n\n" \ |
| "\t\t--silent\t\t- no output on the command line\n\n" \ |
| "\tCommands: (num args)\n" \ |
| "\t\t--ping\t\t\t- ping the daemon (0)\n" \ |
| "\t\t--daemon-state\t\t- check state of the daemon (0)\n" \ |
| "\t\t--lpc-state\t\t- check the state of the lpc mapping (0)\n" \ |
| "\t\t--kill\t\t\t- stop the daemon [no flush] (0)\n" \ |
| "\t\t--reset\t\t\t- hard reset the daemon state (0)\n" \ |
| "\t\t--point-to-flash\t- point the lpc mapping back to flash (0)\n" \ |
| "\t\t--suspend\t\t- suspend the daemon to inhibit flash accesses (0)\n" \ |
| "\t\t--resume\t\t- resume the daemon (1)\n" \ |
| "\t\t\targ[0]: < \"clean\" | \"modified\" >\n" \ |
| "\t\t--clear-cache\t- tell the daemon to discard any caches (0)\n" |
| |
| #define NAME "Mailbox Control" |
| |
| static bool silent; |
| |
| #define MSG_OUT(...) do { if (!silent) { \ |
| fprintf(stdout, __VA_ARGS__); } \ |
| } while (0) |
| #define MSG_ERR(...) do { if (!silent) { \ |
| fprintf(stderr, __VA_ARGS__); } \ |
| } while (0) |
| |
| struct mboxctl_context { |
| sd_bus *bus; |
| }; |
| |
| static void usage(char *name) |
| { |
| MSG_OUT(USAGE, name); |
| exit(0); |
| } |
| |
| static const char *dbus_err_str[] = { |
| "Success", |
| "Failed - Internal Error", |
| "Failed - Invalid Command or Request", |
| "Failed - Request Rejected by Daemon", |
| "Failed - BMC Hardware Error", |
| "Failed - Insufficient Memory for Allocation Request" |
| }; |
| |
| static int init_mboxctl_dbus(struct mboxctl_context *context) |
| { |
| int rc; |
| |
| rc = sd_bus_default_system(&context->bus); |
| if (rc < 0) { |
| MSG_ERR("Failed to connect to the system bus: %s\n", |
| strerror(-rc)); |
| } |
| |
| return rc; |
| } |
| |
| static int send_dbus_msg(struct mboxctl_context *context, |
| struct mbox_dbus_msg *msg, |
| struct mbox_dbus_msg *resp) |
| { |
| sd_bus_error error = SD_BUS_ERROR_NULL; |
| sd_bus_message *m = NULL, *n = NULL; |
| uint8_t *buf; |
| size_t sz; |
| int rc; |
| |
| /* Generate the bus message */ |
| rc = sd_bus_message_new_method_call(context->bus, &m, DBUS_NAME, |
| DOBJ_NAME, DBUS_NAME, "cmd"); |
| if (rc < 0) { |
| MSG_ERR("Failed to init method call: %s\n", |
| strerror(-rc)); |
| rc = -E_DBUS_INTERNAL; |
| goto out; |
| } |
| |
| /* Add the command */ |
| rc = sd_bus_message_append(m, "y", msg->cmd); |
| if (rc < 0) { |
| MSG_ERR("Failed to add cmd to message: %s\n", |
| strerror(-rc)); |
| rc = -E_DBUS_INTERNAL; |
| goto out; |
| } |
| |
| /* Add the args */ |
| rc = sd_bus_message_append_array(m, 'y', msg->args, msg->num_args); |
| if (rc < 0) { |
| MSG_ERR("Failed to add args to message: %s\n", |
| strerror(-rc)); |
| rc = -E_DBUS_INTERNAL; |
| goto out; |
| } |
| |
| /* Send the message */ |
| rc = sd_bus_call(context->bus, m, 0, &error, &n); |
| if (rc < 0) { |
| MSG_ERR("Failed to post message: %s\n", strerror(-rc)); |
| rc = -E_DBUS_INTERNAL; |
| goto out; |
| } |
| |
| /* Read response code */ |
| rc = sd_bus_message_read(n, "y", &resp->cmd); |
| if (rc < 0) { |
| MSG_ERR("Failed to read response code: %s\n", |
| strerror(-rc)); |
| rc = -E_DBUS_INTERNAL; |
| goto out; |
| } |
| |
| /* Read response args */ |
| rc = sd_bus_message_read_array(n, 'y', (const void **) &buf, &sz); |
| if (rc < 0) { |
| MSG_ERR("Failed to read response args: %s\n", |
| strerror(-rc)); |
| rc = -E_DBUS_INTERNAL; |
| goto out; |
| } |
| |
| if (sz < resp->num_args) { |
| MSG_ERR("Command returned insufficient response args\n"); |
| rc = -E_DBUS_INTERNAL; |
| goto out; |
| } |
| |
| memcpy(resp->args, buf, resp->num_args); |
| rc = 0; |
| |
| out: |
| sd_bus_error_free(&error); |
| sd_bus_message_unref(m); |
| sd_bus_message_unref(n); |
| |
| return rc; |
| } |
| |
| static int handle_cmd_ping(struct mboxctl_context *context) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| msg.cmd = DBUS_C_PING; |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send ping command\n"); |
| return rc; |
| } |
| |
| rc = -resp.cmd; |
| MSG_OUT("Ping: %s\n", dbus_err_str[-rc]); |
| |
| return rc; |
| } |
| |
| static int handle_cmd_daemon_state(struct mboxctl_context *context) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| msg.cmd = DBUS_C_DAEMON_STATE; |
| resp.num_args = DAEMON_STATE_NUM_ARGS; |
| resp.args = calloc(resp.num_args, sizeof(*resp.args)); |
| if (!resp.args) { |
| MSG_ERR("Memory allocation failed\n"); |
| return -E_DBUS_NO_MEM; |
| } |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send daemon state command\n"); |
| goto out; |
| } |
| |
| rc = -resp.cmd; |
| if (resp.cmd != DBUS_SUCCESS) { |
| MSG_ERR("Daemon state command failed\n"); |
| goto out; |
| } |
| |
| MSG_OUT("Daemon State: %s\n", resp.args[0] == DAEMON_STATE_ACTIVE ? |
| "Active" : "Suspended"); |
| |
| out: |
| free(resp.args); |
| return rc; |
| } |
| |
| static int handle_cmd_lpc_state(struct mboxctl_context *context) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| msg.cmd = DBUS_C_LPC_STATE; |
| resp.num_args = LPC_STATE_NUM_ARGS; |
| resp.args = calloc(resp.num_args, sizeof(*resp.args)); |
| if (!resp.args) { |
| MSG_ERR("Memory allocation failed\n"); |
| return -E_DBUS_NO_MEM; |
| } |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send lpc state command\n"); |
| goto out; |
| } |
| |
| rc = -resp.cmd; |
| if (resp.cmd != DBUS_SUCCESS) { |
| MSG_ERR("LPC state command failed\n"); |
| goto out; |
| } |
| |
| MSG_OUT("LPC Bus Maps: %s\n", resp.args[0] == LPC_STATE_MEM ? |
| "BMC Memory" : |
| (resp.args[0] == LPC_STATE_FLASH ? |
| "Flash Device" : |
| "Invalid System State")); |
| |
| out: |
| free(resp.args); |
| return rc; |
| } |
| |
| static int handle_cmd_kill(struct mboxctl_context *context) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| msg.cmd = DBUS_C_KILL; |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send kill command\n"); |
| return rc; |
| } |
| |
| rc = -resp.cmd; |
| MSG_OUT("Kill: %s\n", dbus_err_str[-rc]); |
| |
| return rc; |
| } |
| |
| static int handle_cmd_reset(struct mboxctl_context *context) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| msg.cmd = DBUS_C_RESET; |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send reset command\n"); |
| return rc; |
| } |
| |
| rc = -resp.cmd; |
| MSG_OUT("Reset: %s\n", dbus_err_str[-rc]); |
| |
| return rc; |
| } |
| |
| static int handle_cmd_suspend(struct mboxctl_context *context) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| msg.cmd = DBUS_C_SUSPEND; |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send suspend command\n"); |
| return rc; |
| } |
| |
| rc = -resp.cmd; |
| MSG_OUT("Suspend: %s\n", dbus_err_str[-rc]); |
| |
| return rc; |
| } |
| |
| static int handle_cmd_resume(struct mboxctl_context *context, char *arg) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| if (!arg) { |
| MSG_ERR("Resume command takes an argument\n"); |
| return -E_DBUS_INVAL; |
| } |
| |
| msg.cmd = DBUS_C_RESUME; |
| msg.num_args = RESUME_NUM_ARGS; |
| msg.args = calloc(msg.num_args, sizeof(*msg.args)); |
| if (!msg.args) { |
| MSG_ERR("Memory allocation failed\n"); |
| return -E_DBUS_NO_MEM; |
| } |
| |
| if (!strncmp(arg, "clean", strlen("clean"))) { |
| msg.args[0] = RESUME_NOT_MODIFIED; |
| } else if (!strncmp(arg, "modified", strlen("modified"))) { |
| msg.args[0] = RESUME_FLASH_MODIFIED; |
| } else { |
| MSG_ERR("Resume command takes argument < \"clean\" | " |
| "\"modified\" >\n"); |
| rc = -E_DBUS_INVAL; |
| goto out; |
| } |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send resume command\n"); |
| goto out; |
| } |
| |
| rc = -resp.cmd; |
| MSG_OUT("Resume: %s\n", dbus_err_str[-rc]); |
| |
| out: |
| free(msg.args); |
| return rc; |
| } |
| |
| static int handle_cmd_modified(struct mboxctl_context *context) |
| { |
| struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| int rc; |
| |
| msg.cmd = DBUS_C_MODIFIED; |
| |
| rc = send_dbus_msg(context, &msg, &resp); |
| if (rc < 0) { |
| MSG_ERR("Failed to send flash modified command\n"); |
| return rc; |
| } |
| |
| rc = -resp.cmd; |
| MSG_OUT("Clear Cache: %s\n", dbus_err_str[-rc]); |
| |
| return rc; |
| } |
| |
| static int parse_cmdline(struct mboxctl_context *context, int argc, char **argv) |
| { |
| int opt, rc = -1; |
| |
| static const struct option long_options[] = { |
| { "silent", no_argument, 0, 's' }, |
| { "ping", no_argument, 0, 'p' }, |
| { "daemon-state", no_argument, 0, 'd' }, |
| { "lpc-state", no_argument, 0, 'l' }, |
| { "kill", no_argument, 0, 'k' }, |
| { "reset", no_argument, 0, 'r' }, |
| { "point-to-flash", no_argument, 0, 'f' }, |
| { "suspend", no_argument, 0, 'u' }, |
| { "resume", required_argument, 0, 'e' }, |
| { "clear-cache", no_argument, 0, 'c' }, |
| { "version", no_argument, 0, 'v' }, |
| { "help", no_argument, 0, 'h' }, |
| { 0, 0, 0, 0 } |
| }; |
| |
| if (argc <= 1) { |
| usage(argv[0]); |
| return -E_DBUS_INVAL; |
| } |
| |
| while ((opt = getopt_long(argc, argv, "spdlkrfue:cvh", long_options, |
| NULL)) != -1) { |
| switch (opt) { |
| case 's': |
| silent = true; |
| continue; |
| case 'p': |
| rc = handle_cmd_ping(context); |
| break; |
| case 'd': |
| rc = handle_cmd_daemon_state(context); |
| break; |
| case 'l': |
| rc = handle_cmd_lpc_state(context); |
| break; |
| case 'k': |
| rc = handle_cmd_kill(context); |
| break; |
| case 'r': /* These are the same for now (reset may change) */ |
| case 'f': |
| rc = handle_cmd_reset(context); |
| break; |
| case 'u': |
| rc = handle_cmd_suspend(context); |
| break; |
| case 'e': |
| rc = handle_cmd_resume(context, optarg); |
| break; |
| case 'c': |
| rc = handle_cmd_modified(context); |
| break; |
| case 'v': |
| MSG_OUT("%s V%s\n", NAME, PACKAGE_VERSION); |
| rc = 0; |
| break; |
| case 'h': |
| usage(argv[0]); |
| rc = 0; |
| break; |
| default: |
| usage(argv[0]); |
| rc = -E_DBUS_INVAL; |
| break; |
| } |
| } |
| |
| return rc; |
| } |
| |
| int main(int argc, char **argv) |
| { |
| struct mboxctl_context context; |
| int rc; |
| |
| silent = false; |
| |
| rc = init_mboxctl_dbus(&context); |
| if (rc < 0) { |
| MSG_ERR("Failed to init dbus\n"); |
| return rc; |
| } |
| |
| rc = parse_cmdline(&context, argc, argv); |
| |
| return rc; |
| } |