Andrew Jeffery | 4fe996c | 2018-02-27 12:16:48 +1030 | [diff] [blame] | 1 | // SPDX-License-Identifier: Apache-2.0 |
| 2 | // Copyright (C) 2018 IBM Corp. |
Suraj Jitindar Singh | ddf0edb | 2017-03-28 10:50:40 +1100 | [diff] [blame] | 3 | |
| 4 | #define _GNU_SOURCE |
| 5 | #include <assert.h> |
| 6 | #include <errno.h> |
| 7 | #include <fcntl.h> |
| 8 | #include <getopt.h> |
| 9 | #include <limits.h> |
| 10 | #include <poll.h> |
| 11 | #include <stdbool.h> |
| 12 | #include <stdint.h> |
| 13 | #include <stdio.h> |
| 14 | #include <stdlib.h> |
| 15 | #include <string.h> |
| 16 | #include <syslog.h> |
| 17 | #include <signal.h> |
| 18 | #include <sys/ioctl.h> |
| 19 | #include <sys/mman.h> |
| 20 | #include <sys/stat.h> |
| 21 | #include <sys/timerfd.h> |
| 22 | #include <sys/types.h> |
| 23 | #include <time.h> |
| 24 | #include <unistd.h> |
| 25 | #include <inttypes.h> |
| 26 | |
| 27 | #include <systemd/sd-bus.h> |
| 28 | |
Suraj Jitindar Singh | 8d65bb4 | 2017-05-01 16:05:17 +1000 | [diff] [blame] | 29 | #include "config.h" |
Suraj Jitindar Singh | ddf0edb | 2017-03-28 10:50:40 +1100 | [diff] [blame] | 30 | #include "dbus.h" |
| 31 | |
| 32 | #define USAGE \ |
| 33 | "\nUsage: %s [--silent | -s] <command> [args]\n\n" \ |
| 34 | "\t\t--silent\t\t- no output on the command line\n\n" \ |
| 35 | "\tCommands: (num args)\n" \ |
| 36 | "\t\t--ping\t\t\t- ping the daemon (0)\n" \ |
| 37 | "\t\t--daemon-state\t\t- check state of the daemon (0)\n" \ |
| 38 | "\t\t--lpc-state\t\t- check the state of the lpc mapping (0)\n" \ |
| 39 | "\t\t--kill\t\t\t- stop the daemon [no flush] (0)\n" \ |
| 40 | "\t\t--reset\t\t\t- hard reset the daemon state (0)\n" \ |
| 41 | "\t\t--point-to-flash\t- point the lpc mapping back to flash (0)\n" \ |
| 42 | "\t\t--suspend\t\t- suspend the daemon to inhibit flash accesses (0)\n" \ |
| 43 | "\t\t--resume\t\t- resume the daemon (1)\n" \ |
| 44 | "\t\t\targ[0]: < \"clean\" | \"modified\" >\n" \ |
| 45 | "\t\t--clear-cache\t- tell the daemon to discard any caches (0)\n" |
| 46 | |
Suraj Jitindar Singh | 8d65bb4 | 2017-05-01 16:05:17 +1000 | [diff] [blame] | 47 | #define NAME "Mailbox Control" |
Suraj Jitindar Singh | ddf0edb | 2017-03-28 10:50:40 +1100 | [diff] [blame] | 48 | |
| 49 | static bool silent; |
| 50 | |
| 51 | #define MSG_OUT(...) do { if (!silent) { \ |
| 52 | fprintf(stdout, __VA_ARGS__); } \ |
| 53 | } while (0) |
| 54 | #define MSG_ERR(...) do { if (!silent) { \ |
| 55 | fprintf(stderr, __VA_ARGS__); } \ |
| 56 | } while (0) |
| 57 | |
| 58 | struct mboxctl_context { |
| 59 | sd_bus *bus; |
| 60 | }; |
| 61 | |
| 62 | static void usage(char *name) |
| 63 | { |
| 64 | MSG_OUT(USAGE, name); |
| 65 | exit(0); |
| 66 | } |
| 67 | |
| 68 | static const char *dbus_err_str[] = { |
| 69 | "Success", |
| 70 | "Failed - Internal Error", |
| 71 | "Failed - Invalid Command or Request", |
| 72 | "Failed - Request Rejected by Daemon", |
| 73 | "Failed - BMC Hardware Error", |
| 74 | "Failed - Insufficient Memory for Allocation Request" |
| 75 | }; |
| 76 | |
| 77 | static int init_mboxctl_dbus(struct mboxctl_context *context) |
| 78 | { |
| 79 | int rc; |
| 80 | |
| 81 | rc = sd_bus_default_system(&context->bus); |
| 82 | if (rc < 0) { |
| 83 | MSG_ERR("Failed to connect to the system bus: %s\n", |
| 84 | strerror(-rc)); |
| 85 | } |
| 86 | |
| 87 | return rc; |
| 88 | } |
| 89 | |
| 90 | static int send_dbus_msg(struct mboxctl_context *context, |
| 91 | struct mbox_dbus_msg *msg, |
| 92 | struct mbox_dbus_msg *resp) |
| 93 | { |
| 94 | sd_bus_error error = SD_BUS_ERROR_NULL; |
| 95 | sd_bus_message *m = NULL, *n = NULL; |
| 96 | uint8_t *buf; |
| 97 | size_t sz; |
| 98 | int rc; |
| 99 | |
| 100 | /* Generate the bus message */ |
| 101 | rc = sd_bus_message_new_method_call(context->bus, &m, DBUS_NAME, |
| 102 | DOBJ_NAME, DBUS_NAME, "cmd"); |
| 103 | if (rc < 0) { |
| 104 | MSG_ERR("Failed to init method call: %s\n", |
| 105 | strerror(-rc)); |
| 106 | rc = -E_DBUS_INTERNAL; |
| 107 | goto out; |
| 108 | } |
| 109 | |
| 110 | /* Add the command */ |
| 111 | rc = sd_bus_message_append(m, "y", msg->cmd); |
| 112 | if (rc < 0) { |
| 113 | MSG_ERR("Failed to add cmd to message: %s\n", |
| 114 | strerror(-rc)); |
| 115 | rc = -E_DBUS_INTERNAL; |
| 116 | goto out; |
| 117 | } |
| 118 | |
| 119 | /* Add the args */ |
| 120 | rc = sd_bus_message_append_array(m, 'y', msg->args, msg->num_args); |
| 121 | if (rc < 0) { |
| 122 | MSG_ERR("Failed to add args to message: %s\n", |
| 123 | strerror(-rc)); |
| 124 | rc = -E_DBUS_INTERNAL; |
| 125 | goto out; |
| 126 | } |
| 127 | |
| 128 | /* Send the message */ |
| 129 | rc = sd_bus_call(context->bus, m, 0, &error, &n); |
| 130 | if (rc < 0) { |
| 131 | MSG_ERR("Failed to post message: %s\n", strerror(-rc)); |
| 132 | rc = -E_DBUS_INTERNAL; |
| 133 | goto out; |
| 134 | } |
| 135 | |
| 136 | /* Read response code */ |
| 137 | rc = sd_bus_message_read(n, "y", &resp->cmd); |
| 138 | if (rc < 0) { |
| 139 | MSG_ERR("Failed to read response code: %s\n", |
| 140 | strerror(-rc)); |
| 141 | rc = -E_DBUS_INTERNAL; |
| 142 | goto out; |
| 143 | } |
| 144 | |
| 145 | /* Read response args */ |
| 146 | rc = sd_bus_message_read_array(n, 'y', (const void **) &buf, &sz); |
| 147 | if (rc < 0) { |
| 148 | MSG_ERR("Failed to read response args: %s\n", |
| 149 | strerror(-rc)); |
| 150 | rc = -E_DBUS_INTERNAL; |
| 151 | goto out; |
| 152 | } |
| 153 | |
| 154 | if (sz < resp->num_args) { |
| 155 | MSG_ERR("Command returned insufficient response args\n"); |
| 156 | rc = -E_DBUS_INTERNAL; |
| 157 | goto out; |
| 158 | } |
| 159 | |
| 160 | memcpy(resp->args, buf, resp->num_args); |
| 161 | rc = 0; |
| 162 | |
| 163 | out: |
| 164 | sd_bus_error_free(&error); |
| 165 | sd_bus_message_unref(m); |
| 166 | sd_bus_message_unref(n); |
| 167 | |
| 168 | return rc; |
| 169 | } |
| 170 | |
| 171 | static int handle_cmd_ping(struct mboxctl_context *context) |
| 172 | { |
| 173 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 174 | int rc; |
| 175 | |
| 176 | msg.cmd = DBUS_C_PING; |
| 177 | |
| 178 | rc = send_dbus_msg(context, &msg, &resp); |
| 179 | if (rc < 0) { |
| 180 | MSG_ERR("Failed to send ping command\n"); |
| 181 | return rc; |
| 182 | } |
| 183 | |
| 184 | rc = -resp.cmd; |
| 185 | MSG_OUT("Ping: %s\n", dbus_err_str[-rc]); |
| 186 | |
| 187 | return rc; |
| 188 | } |
| 189 | |
| 190 | static int handle_cmd_daemon_state(struct mboxctl_context *context) |
| 191 | { |
| 192 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 193 | int rc; |
| 194 | |
| 195 | msg.cmd = DBUS_C_DAEMON_STATE; |
| 196 | resp.num_args = DAEMON_STATE_NUM_ARGS; |
| 197 | resp.args = calloc(resp.num_args, sizeof(*resp.args)); |
| 198 | if (!resp.args) { |
| 199 | MSG_ERR("Memory allocation failed\n"); |
| 200 | return -E_DBUS_NO_MEM; |
| 201 | } |
| 202 | |
| 203 | rc = send_dbus_msg(context, &msg, &resp); |
| 204 | if (rc < 0) { |
| 205 | MSG_ERR("Failed to send daemon state command\n"); |
| 206 | goto out; |
| 207 | } |
| 208 | |
| 209 | rc = -resp.cmd; |
| 210 | if (resp.cmd != DBUS_SUCCESS) { |
| 211 | MSG_ERR("Daemon state command failed\n"); |
| 212 | goto out; |
| 213 | } |
| 214 | |
| 215 | MSG_OUT("Daemon State: %s\n", resp.args[0] == DAEMON_STATE_ACTIVE ? |
| 216 | "Active" : "Suspended"); |
| 217 | |
| 218 | out: |
| 219 | free(resp.args); |
| 220 | return rc; |
| 221 | } |
| 222 | |
| 223 | static int handle_cmd_lpc_state(struct mboxctl_context *context) |
| 224 | { |
| 225 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 226 | int rc; |
| 227 | |
| 228 | msg.cmd = DBUS_C_LPC_STATE; |
| 229 | resp.num_args = LPC_STATE_NUM_ARGS; |
| 230 | resp.args = calloc(resp.num_args, sizeof(*resp.args)); |
| 231 | if (!resp.args) { |
| 232 | MSG_ERR("Memory allocation failed\n"); |
| 233 | return -E_DBUS_NO_MEM; |
| 234 | } |
| 235 | |
| 236 | rc = send_dbus_msg(context, &msg, &resp); |
| 237 | if (rc < 0) { |
| 238 | MSG_ERR("Failed to send lpc state command\n"); |
| 239 | goto out; |
| 240 | } |
| 241 | |
| 242 | rc = -resp.cmd; |
| 243 | if (resp.cmd != DBUS_SUCCESS) { |
| 244 | MSG_ERR("LPC state command failed\n"); |
| 245 | goto out; |
| 246 | } |
| 247 | |
| 248 | MSG_OUT("LPC Bus Maps: %s\n", resp.args[0] == LPC_STATE_MEM ? |
| 249 | "BMC Memory" : |
| 250 | (resp.args[0] == LPC_STATE_FLASH ? |
| 251 | "Flash Device" : |
| 252 | "Invalid System State")); |
| 253 | |
| 254 | out: |
| 255 | free(resp.args); |
| 256 | return rc; |
| 257 | } |
| 258 | |
| 259 | static int handle_cmd_kill(struct mboxctl_context *context) |
| 260 | { |
| 261 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 262 | int rc; |
| 263 | |
| 264 | msg.cmd = DBUS_C_KILL; |
| 265 | |
| 266 | rc = send_dbus_msg(context, &msg, &resp); |
| 267 | if (rc < 0) { |
| 268 | MSG_ERR("Failed to send kill command\n"); |
| 269 | return rc; |
| 270 | } |
| 271 | |
| 272 | rc = -resp.cmd; |
| 273 | MSG_OUT("Kill: %s\n", dbus_err_str[-rc]); |
| 274 | |
| 275 | return rc; |
| 276 | } |
| 277 | |
| 278 | static int handle_cmd_reset(struct mboxctl_context *context) |
| 279 | { |
| 280 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 281 | int rc; |
| 282 | |
| 283 | msg.cmd = DBUS_C_RESET; |
| 284 | |
| 285 | rc = send_dbus_msg(context, &msg, &resp); |
| 286 | if (rc < 0) { |
| 287 | MSG_ERR("Failed to send reset command\n"); |
| 288 | return rc; |
| 289 | } |
| 290 | |
| 291 | rc = -resp.cmd; |
| 292 | MSG_OUT("Reset: %s\n", dbus_err_str[-rc]); |
| 293 | |
| 294 | return rc; |
| 295 | } |
| 296 | |
| 297 | static int handle_cmd_suspend(struct mboxctl_context *context) |
| 298 | { |
| 299 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 300 | int rc; |
| 301 | |
| 302 | msg.cmd = DBUS_C_SUSPEND; |
| 303 | |
| 304 | rc = send_dbus_msg(context, &msg, &resp); |
| 305 | if (rc < 0) { |
| 306 | MSG_ERR("Failed to send suspend command\n"); |
| 307 | return rc; |
| 308 | } |
| 309 | |
| 310 | rc = -resp.cmd; |
| 311 | MSG_OUT("Suspend: %s\n", dbus_err_str[-rc]); |
| 312 | |
| 313 | return rc; |
| 314 | } |
| 315 | |
| 316 | static int handle_cmd_resume(struct mboxctl_context *context, char *arg) |
| 317 | { |
| 318 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 319 | int rc; |
| 320 | |
| 321 | if (!arg) { |
| 322 | MSG_ERR("Resume command takes an argument\n"); |
| 323 | return -E_DBUS_INVAL; |
| 324 | } |
| 325 | |
| 326 | msg.cmd = DBUS_C_RESUME; |
| 327 | msg.num_args = RESUME_NUM_ARGS; |
| 328 | msg.args = calloc(msg.num_args, sizeof(*msg.args)); |
| 329 | if (!msg.args) { |
| 330 | MSG_ERR("Memory allocation failed\n"); |
| 331 | return -E_DBUS_NO_MEM; |
| 332 | } |
| 333 | |
| 334 | if (!strncmp(arg, "clean", strlen("clean"))) { |
| 335 | msg.args[0] = RESUME_NOT_MODIFIED; |
| 336 | } else if (!strncmp(arg, "modified", strlen("modified"))) { |
| 337 | msg.args[0] = RESUME_FLASH_MODIFIED; |
| 338 | } else { |
| 339 | MSG_ERR("Resume command takes argument < \"clean\" | " |
| 340 | "\"modified\" >\n"); |
| 341 | rc = -E_DBUS_INVAL; |
| 342 | goto out; |
| 343 | } |
| 344 | |
| 345 | rc = send_dbus_msg(context, &msg, &resp); |
| 346 | if (rc < 0) { |
| 347 | MSG_ERR("Failed to send resume command\n"); |
| 348 | goto out; |
| 349 | } |
| 350 | |
| 351 | rc = -resp.cmd; |
| 352 | MSG_OUT("Resume: %s\n", dbus_err_str[-rc]); |
| 353 | |
| 354 | out: |
| 355 | free(msg.args); |
| 356 | return rc; |
| 357 | } |
| 358 | |
| 359 | static int handle_cmd_modified(struct mboxctl_context *context) |
| 360 | { |
| 361 | struct mbox_dbus_msg msg = { 0 }, resp = { 0 }; |
| 362 | int rc; |
| 363 | |
| 364 | msg.cmd = DBUS_C_MODIFIED; |
| 365 | |
| 366 | rc = send_dbus_msg(context, &msg, &resp); |
| 367 | if (rc < 0) { |
| 368 | MSG_ERR("Failed to send flash modified command\n"); |
| 369 | return rc; |
| 370 | } |
| 371 | |
| 372 | rc = -resp.cmd; |
| 373 | MSG_OUT("Clear Cache: %s\n", dbus_err_str[-rc]); |
| 374 | |
| 375 | return rc; |
| 376 | } |
| 377 | |
| 378 | static int parse_cmdline(struct mboxctl_context *context, int argc, char **argv) |
| 379 | { |
| 380 | int opt, rc = -1; |
| 381 | |
| 382 | static const struct option long_options[] = { |
| 383 | { "silent", no_argument, 0, 's' }, |
| 384 | { "ping", no_argument, 0, 'p' }, |
| 385 | { "daemon-state", no_argument, 0, 'd' }, |
| 386 | { "lpc-state", no_argument, 0, 'l' }, |
| 387 | { "kill", no_argument, 0, 'k' }, |
| 388 | { "reset", no_argument, 0, 'r' }, |
| 389 | { "point-to-flash", no_argument, 0, 'f' }, |
| 390 | { "suspend", no_argument, 0, 'u' }, |
| 391 | { "resume", required_argument, 0, 'e' }, |
| 392 | { "clear-cache", no_argument, 0, 'c' }, |
| 393 | { "version", no_argument, 0, 'v' }, |
| 394 | { "help", no_argument, 0, 'h' }, |
| 395 | { 0, 0, 0, 0 } |
| 396 | }; |
| 397 | |
| 398 | if (argc <= 1) { |
| 399 | usage(argv[0]); |
| 400 | return -E_DBUS_INVAL; |
| 401 | } |
| 402 | |
| 403 | while ((opt = getopt_long(argc, argv, "spdlkrfue:cvh", long_options, |
| 404 | NULL)) != -1) { |
| 405 | switch (opt) { |
| 406 | case 's': |
| 407 | silent = true; |
| 408 | continue; |
| 409 | case 'p': |
| 410 | rc = handle_cmd_ping(context); |
| 411 | break; |
| 412 | case 'd': |
| 413 | rc = handle_cmd_daemon_state(context); |
| 414 | break; |
| 415 | case 'l': |
| 416 | rc = handle_cmd_lpc_state(context); |
| 417 | break; |
| 418 | case 'k': |
| 419 | rc = handle_cmd_kill(context); |
| 420 | break; |
| 421 | case 'r': /* These are the same for now (reset may change) */ |
| 422 | case 'f': |
| 423 | rc = handle_cmd_reset(context); |
| 424 | break; |
| 425 | case 'u': |
| 426 | rc = handle_cmd_suspend(context); |
| 427 | break; |
| 428 | case 'e': |
| 429 | rc = handle_cmd_resume(context, optarg); |
| 430 | break; |
| 431 | case 'c': |
| 432 | rc = handle_cmd_modified(context); |
| 433 | break; |
| 434 | case 'v': |
Suraj Jitindar Singh | 8d65bb4 | 2017-05-01 16:05:17 +1000 | [diff] [blame] | 435 | MSG_OUT("%s V%s\n", NAME, PACKAGE_VERSION); |
Suraj Jitindar Singh | ddf0edb | 2017-03-28 10:50:40 +1100 | [diff] [blame] | 436 | rc = 0; |
| 437 | break; |
| 438 | case 'h': |
| 439 | usage(argv[0]); |
| 440 | rc = 0; |
| 441 | break; |
| 442 | default: |
| 443 | usage(argv[0]); |
| 444 | rc = -E_DBUS_INVAL; |
| 445 | break; |
| 446 | } |
| 447 | } |
| 448 | |
| 449 | return rc; |
| 450 | } |
| 451 | |
| 452 | int main(int argc, char **argv) |
| 453 | { |
| 454 | struct mboxctl_context context; |
| 455 | int rc; |
| 456 | |
| 457 | silent = false; |
| 458 | |
| 459 | rc = init_mboxctl_dbus(&context); |
| 460 | if (rc < 0) { |
| 461 | MSG_ERR("Failed to init dbus\n"); |
| 462 | return rc; |
| 463 | } |
| 464 | |
| 465 | rc = parse_cmdline(&context, argc, argv); |
| 466 | |
| 467 | return rc; |
| 468 | } |