| /* |
| // Copyright (c) 2019 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #include <boost/beast/core/span.hpp> |
| #include <ipmi_to_redfish_hooks.hpp> |
| #include <me_to_redfish_hooks.hpp> |
| #include <storagecommands.hpp> |
| |
| #include <iomanip> |
| #include <sstream> |
| #include <string_view> |
| |
| namespace intel_oem::ipmi::sel |
| { |
| |
| namespace redfish_hooks |
| { |
| static void toHexStr(const boost::beast::span<uint8_t> bytes, |
| std::string& hexStr) |
| { |
| std::stringstream stream; |
| stream << std::hex << std::uppercase << std::setfill('0'); |
| for (const uint8_t& byte : bytes) |
| { |
| stream << std::setw(2) << static_cast<int>(byte); |
| } |
| hexStr = stream.str(); |
| } |
| |
| // Record a BIOS message as a Redfish message instead of a SEL record |
| static bool biosMessageHook(const SELData& selData, const std::string& ipmiRaw) |
| { |
| // This is a BIOS message, so record it as a Redfish message instead |
| // of a SEL record |
| |
| // Walk through the SEL request record to build the appropriate Redfish |
| // message |
| static constexpr std::string_view openBMCMessageRegistryVersion = "0.1"; |
| std::string messageID = |
| "OpenBMC." + std::string(openBMCMessageRegistryVersion); |
| std::vector<std::string> messageArgs; |
| BIOSSensors sensor = static_cast<BIOSSensors>(selData.sensorNum); |
| BIOSEventTypes eventType = static_cast<BIOSEventTypes>(selData.eventType); |
| switch (sensor) |
| { |
| case BIOSSensors::memoryRASConfigStatus: |
| switch (eventType) |
| { |
| case BIOSEventTypes::digitalDiscrete: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".MemoryRASConfigurationDisabled"; |
| break; |
| case 0x01: |
| messageID += ".MemoryRASConfigurationEnabled"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // error = eventData2 bits [3:0] |
| int error = selData.eventData2 & 0x0F; |
| |
| // mode = eventData3 bits [3:0] |
| int mode = selData.eventData3 & 0x0F; |
| |
| // Save the messageArgs |
| switch (error) |
| { |
| case 0x00: |
| messageArgs.push_back("None"); |
| break; |
| case 0x03: |
| messageArgs.push_back("Invalid DIMM Config"); |
| break; |
| default: |
| messageArgs.push_back(std::to_string(error)); |
| break; |
| } |
| switch (mode) |
| { |
| case 0x00: |
| messageArgs.push_back("None"); |
| break; |
| case 0x01: |
| messageArgs.push_back("Mirroring"); |
| break; |
| case 0x02: |
| messageArgs.push_back("Lockstep"); |
| break; |
| case 0x04: |
| messageArgs.push_back("Rank Sparing"); |
| break; |
| default: |
| messageArgs.push_back(std::to_string(mode)); |
| break; |
| } |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSensors::biosPOSTError: |
| switch (eventType) |
| { |
| case BIOSEventTypes::sensorSpecificOffset: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".BIOSPOSTError"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| std::array<uint8_t, 2> post; |
| // post LSB = eventData2 bits [7:0] |
| post[1] = selData.eventData2; |
| // post MSB = eventData3 bits [7:0] |
| post[0] = selData.eventData3; |
| |
| // Save the messageArgs |
| messageArgs.emplace_back(); |
| std::string& postStr = messageArgs.back(); |
| toHexStr(boost::beast::span<uint8_t>(post), postStr); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSensors::intelUPILinkWidthReduced: |
| switch (eventType) |
| { |
| case BIOSEventTypes::oemDiscrete7: |
| { |
| switch (selData.offset) |
| { |
| case 0x01: |
| messageID += ".IntelUPILinkWidthReducedToHalf"; |
| break; |
| case 0x02: |
| messageID += ".IntelUPILinkWidthReducedToQuarter"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 |
| |
| // Node ID = eventData2 bits [7:0] |
| int node = selData.eventData2; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(node + 1)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSensors::memoryRASModeSelect: |
| switch (eventType) |
| { |
| case BIOSEventTypes::digitalDiscrete: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".MemoryRASModeDisabled"; |
| break; |
| case 0x01: |
| messageID += ".MemoryRASModeEnabled"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // prior mode = eventData2 bits [3:0] |
| int priorMode = selData.eventData2 & 0x0F; |
| |
| // selected mode = eventData3 bits [3:0] |
| int selectedMode = selData.eventData3 & 0x0F; |
| |
| // Save the messageArgs |
| switch (priorMode) |
| { |
| case 0x00: |
| messageArgs.push_back("None"); |
| break; |
| case 0x01: |
| messageArgs.push_back("Mirroring"); |
| break; |
| case 0x02: |
| messageArgs.push_back("Lockstep"); |
| break; |
| case 0x04: |
| messageArgs.push_back("Rank Sparing"); |
| break; |
| default: |
| messageArgs.push_back(std::to_string(priorMode)); |
| break; |
| } |
| switch (selectedMode) |
| { |
| case 0x00: |
| messageArgs.push_back("None"); |
| break; |
| case 0x01: |
| messageArgs.push_back("Mirroring"); |
| break; |
| case 0x02: |
| messageArgs.push_back("Lockstep"); |
| break; |
| case 0x04: |
| messageArgs.push_back("Rank Sparing"); |
| break; |
| default: |
| messageArgs.push_back(std::to_string(selectedMode)); |
| break; |
| } |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSensors::bootEvent: |
| switch (eventType) |
| { |
| case BIOSEventTypes::sensorSpecificOffset: |
| { |
| switch (selData.offset) |
| { |
| case 0x01: |
| messageID += ".BIOSBoot"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| |
| // Log the Redfish message to the journal with the appropriate metadata |
| std::string journalMsg = "BIOS POST IPMI event: " + ipmiRaw; |
| if (messageArgs.empty()) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| journalMsg.c_str(), |
| phosphor::logging::entry("REDFISH_MESSAGE_ID=%s", |
| messageID.c_str())); |
| } |
| else |
| { |
| std::string messageArgsString = |
| boost::algorithm::join(messageArgs, ","); |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| journalMsg.c_str(), |
| phosphor::logging::entry("REDFISH_MESSAGE_ID=%s", |
| messageID.c_str()), |
| phosphor::logging::entry("REDFISH_MESSAGE_ARGS=%s", |
| messageArgsString.c_str())); |
| } |
| |
| return true; |
| } |
| |
| // Record a BIOS SMI message as a Redfish message instead of a SEL record |
| static bool biosSMIMessageHook(const SELData& selData, |
| const std::string& ipmiRaw) |
| { |
| // This is a BIOS SMI message, so record it as a Redfish message instead |
| // of a SEL record |
| |
| // Walk through the SEL request record to build the appropriate Redfish |
| // message |
| static constexpr std::string_view openBMCMessageRegistryVersion = "0.1"; |
| std::string messageID = |
| "OpenBMC." + std::string(openBMCMessageRegistryVersion); |
| std::vector<std::string> messageArgs; |
| BIOSSMISensors sensor = static_cast<BIOSSMISensors>(selData.sensorNum); |
| BIOSEventTypes eventType = static_cast<BIOSEventTypes>(selData.eventType); |
| switch (sensor) |
| { |
| case BIOSSMISensors::mirroringRedundancyState: |
| switch (eventType) |
| { |
| case BIOSEventTypes::discreteRedundancyStates: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".MirroringRedundancyFull"; |
| break; |
| case 0x02: |
| messageID += ".MirroringRedundancyDegraded"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // pair = eventData2 bits [7:4] |
| int pair = selData.eventData2 >> 4 & 0x0F; |
| // rank = eventData2 bits [1:0] |
| int rank = selData.eventData2 & 0x03; |
| |
| // Socket ID = eventData3 bits [7:5] |
| int socket = selData.eventData3 >> 5 & 0x07; |
| // Channel = eventData3 bits [4:2] |
| int channel = selData.eventData3 >> 2 & 0x07; |
| char channelLetter[4] = {'A'}; |
| channelLetter[0] += channel; |
| // DIMM = eventData3 bits [1:0] |
| int dimm = selData.eventData3 & 0x03; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(socket + 1)); |
| messageArgs.push_back(std::string(channelLetter)); |
| messageArgs.push_back(std::to_string(dimm + 1)); |
| messageArgs.push_back(std::to_string(pair)); |
| messageArgs.push_back(std::to_string(rank)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::memoryECCError: |
| switch (eventType) |
| { |
| case BIOSEventTypes::sensorSpecificOffset: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".MemoryECCCorrectable"; |
| break; |
| case 0x01: |
| messageID += ".MemoryECCUncorrectable"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // dimm = eventData2 bits [7:4] |
| int dimm = selData.eventData2 >> 4 & 0x0F; |
| // rank = eventData2 bits [3:0] |
| int rank = selData.eventData2 & 0x0F; |
| |
| // Socket ID = eventData3 bits [7:4] |
| int socket = selData.eventData3 >> 4 & 0x0F; |
| // Channel = eventData3 bits [3:0] |
| int channel = selData.eventData3 & 0x0F; |
| char channelLetter[4] = {'A'}; |
| channelLetter[0] += channel; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(socket + 1)); |
| messageArgs.push_back(std::string(channelLetter)); |
| messageArgs.push_back(std::to_string(dimm)); |
| messageArgs.push_back(std::to_string(rank)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::legacyPCIError: |
| switch (eventType) |
| { |
| case BIOSEventTypes::sensorSpecificOffset: |
| { |
| switch (selData.offset) |
| { |
| case 0x04: |
| messageID += ".LegacyPCIPERR"; |
| break; |
| case 0x05: |
| messageID += ".LegacyPCISERR"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // Bus = eventData2 bits [7:0] |
| int bus = selData.eventData2; |
| // Device = eventData3 bits [7:3] |
| int device = selData.eventData3 >> 3 & 0x1F; |
| // Function = eventData3 bits [2:0] |
| int function = selData.eventData3 >> 0x07; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(bus)); |
| messageArgs.push_back(std::to_string(device)); |
| messageArgs.push_back(std::to_string(function)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::pcieFatalError: |
| switch (eventType) |
| { |
| case BIOSEventTypes::oemDiscrete0: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".PCIeFatalDataLinkLayerProtocol"; |
| break; |
| case 0x01: |
| messageID += ".PCIeFatalSurpriseLinkDown"; |
| break; |
| case 0x02: |
| messageID += ".PCIeFatalCompleterAbort"; |
| break; |
| case 0x03: |
| messageID += ".PCIeFatalUnsupportedRequest"; |
| break; |
| case 0x04: |
| messageID += ".PCIeFatalPoisonedTLP"; |
| break; |
| case 0x05: |
| messageID += ".PCIeFatalFlowControlProtocol"; |
| break; |
| case 0x06: |
| messageID += ".PCIeFatalCompletionTimeout"; |
| break; |
| case 0x07: |
| messageID += ".PCIeFatalReceiverBufferOverflow"; |
| break; |
| case 0x08: |
| messageID += ".PCIeFatalACSViolation"; |
| break; |
| case 0x09: |
| messageID += ".PCIeFatalMalformedTLP"; |
| break; |
| case 0x0a: |
| messageID += ".PCIeFatalECRCError"; |
| break; |
| case 0x0b: |
| messageID += |
| ".PCIeFatalReceivedFatalMessageFromDownstream"; |
| break; |
| case 0x0c: |
| messageID += ".PCIeFatalUnexpectedCompletion"; |
| break; |
| case 0x0d: |
| messageID += ".PCIeFatalReceivedErrNonFatalMessage"; |
| break; |
| case 0x0e: |
| messageID += ".PCIeFatalUncorrectableInternal"; |
| break; |
| case 0x0f: |
| messageID += ".PCIeFatalMCBlockedTLP"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // Bus = eventData2 bits [7:0] |
| int bus = selData.eventData2; |
| // Device = eventData3 bits [7:3] |
| int device = selData.eventData3 >> 3 & 0x1F; |
| // Function = eventData3 bits [2:0] |
| int function = selData.eventData3 >> 0x07; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(bus)); |
| messageArgs.push_back(std::to_string(device)); |
| messageArgs.push_back(std::to_string(function)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::pcieCorrectableError: |
| switch (eventType) |
| { |
| case BIOSEventTypes::oemDiscrete1: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".PCIeCorrectableReceiverError"; |
| break; |
| case 0x01: |
| messageID += ".PCIeCorrectableBadDLLP"; |
| break; |
| case 0x02: |
| messageID += ".PCIeCorrectableBadTLP"; |
| break; |
| case 0x03: |
| messageID += ".PCIeCorrectableReplayNumRollover"; |
| break; |
| case 0x04: |
| messageID += ".PCIeCorrectableReplayTimerTimeout"; |
| break; |
| case 0x05: |
| messageID += ".PCIeCorrectableAdvisoryNonFatal"; |
| break; |
| case 0x06: |
| messageID += ".PCIeCorrectableLinkBWChanged"; |
| break; |
| case 0x07: |
| messageID += ".PCIeCorrectableInternal"; |
| break; |
| case 0x08: |
| messageID += ".PCIeCorrectableHeaderLogOverflow"; |
| break; |
| case 0x0f: |
| messageID += ".PCIeCorrectableUnspecifiedAERError"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // Bus = eventData2 bits [7:0] |
| int bus = selData.eventData2; |
| // Device = eventData3 bits [7:3] |
| int device = selData.eventData3 >> 3 & 0x1F; |
| // Function = eventData3 bits [2:0] |
| int function = selData.eventData3 >> 0x07; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(bus)); |
| messageArgs.push_back(std::to_string(device)); |
| messageArgs.push_back(std::to_string(function)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::sparingRedundancyState: |
| switch (eventType) |
| { |
| case BIOSEventTypes::discreteRedundancyStates: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".SparingRedundancyFull"; |
| break; |
| case 0x02: |
| messageID += ".SparingRedundancyDegraded"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // domain = eventData2 bits [7:4] |
| int domain = selData.eventData2 >> 4 & 0x0F; |
| char domainLetter[4] = {'A'}; |
| domainLetter[0] += domain; |
| // rank = eventData2 bits [1:0] |
| int rank = selData.eventData2 & 0x03; |
| |
| // Socket ID = eventData3 bits [7:5] |
| int socket = selData.eventData3 >> 5 & 0x07; |
| // Channel = eventData3 bits [4:2] |
| int channel = selData.eventData3 >> 2 & 0x07; |
| char channelLetter[4] = {'A'}; |
| channelLetter[0] += channel; |
| // DIMM = eventData3 bits [1:0] |
| int dimm = selData.eventData3 & 0x03; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(socket + 1)); |
| messageArgs.push_back(std::string(channelLetter)); |
| messageArgs.push_back(std::to_string(dimm + 1)); |
| messageArgs.push_back(std::string(domainLetter)); |
| messageArgs.push_back(std::to_string(rank)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::memoryParityError: |
| switch (eventType) |
| { |
| case BIOSEventTypes::sensorSpecificOffset: |
| { |
| switch (selData.offset) |
| { |
| case 0x03: |
| { |
| // type = eventData2 bits [2:0] |
| int type = selData.eventData2 & 0x07; |
| switch (type) |
| { |
| case 0x00: |
| messageID += ".MemoryParityNotKnown"; |
| break; |
| case 0x03: |
| messageID += |
| ".MemoryParityCommandAndAddress"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // channelValid = eventData2 bit [4] |
| int channelValid = selData.eventData2 >> 4 & 0x01; |
| // dimmValid = eventData2 bit [3] |
| int dimmValid = selData.eventData2 >> 3 & 0x01; |
| |
| // Socket ID = eventData3 bits [7:5] |
| int socket = selData.eventData3 >> 5 & 0x07; |
| // Channel = eventData3 bits [4:2] |
| int channel = selData.eventData3 >> 2 & 0x07; |
| char channelLetter[4] = {'A'}; |
| channelLetter[0] += channel; |
| // DIMM = eventData3 bits [1:0] |
| int dimm = selData.eventData3 & 0x03; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(socket + 1)); |
| messageArgs.push_back(std::string(channelLetter)); |
| messageArgs.push_back(std::to_string(dimm + 1)); |
| messageArgs.push_back(std::to_string(channelValid)); |
| messageArgs.push_back(std::to_string(dimmValid)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::pcieFatalError2: |
| switch (eventType) |
| { |
| case BIOSEventTypes::oemDiscrete6: |
| { |
| switch (selData.offset) |
| { |
| case 0x00: |
| messageID += ".PCIeFatalAtomicEgressBlocked"; |
| break; |
| case 0x01: |
| messageID += ".PCIeFatalTLPPrefixBlocked"; |
| break; |
| case 0x0f: |
| messageID += |
| ".PCIeFatalUnspecifiedNonAERFatalError"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| // Get the message data from eventData2 and eventData3 |
| |
| // Bus = eventData2 bits [7:0] |
| int bus = selData.eventData2; |
| // Device = eventData3 bits [7:3] |
| int device = selData.eventData3 >> 3 & 0x1F; |
| // Function = eventData3 bits [2:0] |
| int function = selData.eventData3 >> 0x07; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(bus)); |
| messageArgs.push_back(std::to_string(device)); |
| messageArgs.push_back(std::to_string(function)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::biosRecovery: |
| switch (eventType) |
| { |
| case BIOSEventTypes::oemDiscrete0: |
| { |
| switch (selData.offset) |
| { |
| case 0x01: |
| messageID += ".BIOSRecoveryStart"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| } |
| case BIOSEventTypes::reservedF0: |
| { |
| switch (selData.offset) |
| { |
| case 0x01: |
| messageID += ".BIOSRecoveryComplete"; |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| case BIOSSMISensors::adddcError: |
| switch (eventType) |
| { |
| case BIOSEventTypes::reservedA0: |
| { |
| messageID += ".ADDDCCorrectable"; |
| |
| // Get the message data from eventData2 and eventData3 |
| |
| // dimm = eventData2 bits [7:4] |
| int dimm = selData.eventData2 >> 4 & 0x0F; |
| // rank = eventData2 bits [3:0] |
| int rank = selData.eventData2 & 0x0F; |
| |
| // Socket ID = eventData3 bits [7:4] |
| int socket = selData.eventData3 >> 4 & 0x0F; |
| // Channel = eventData3 bits [3:0] |
| int channel = selData.eventData3 & 0x0F; |
| char channelLetter[4] = {'A'}; |
| channelLetter[0] += channel; |
| |
| // Save the messageArgs |
| messageArgs.push_back(std::to_string(socket + 1)); |
| messageArgs.push_back(std::string(channelLetter)); |
| messageArgs.push_back(std::to_string(dimm)); |
| messageArgs.push_back(std::to_string(rank)); |
| |
| break; |
| } |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| break; |
| default: |
| return defaultMessageHook(ipmiRaw); |
| break; |
| } |
| |
| // Log the Redfish message to the journal with the appropriate metadata |
| std::string journalMsg = "BIOS SMI IPMI event: " + ipmiRaw; |
| std::string messageArgsString = boost::algorithm::join(messageArgs, ","); |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| journalMsg.c_str(), |
| phosphor::logging::entry("REDFISH_MESSAGE_ID=%s", messageID.c_str()), |
| phosphor::logging::entry("REDFISH_MESSAGE_ARGS=%s", |
| messageArgsString.c_str())); |
| |
| return true; |
| } |
| |
| static bool startRedfishHook(const SELData& selData, const std::string& ipmiRaw) |
| { |
| switch (selData.generatorID) |
| { |
| case 0x01: // Check if this message is from the BIOS Generator ID |
| // Let the BIOS hook handle this request |
| return biosMessageHook(selData, ipmiRaw); |
| break; |
| |
| case 0x33: // Check if this message is from the BIOS SMI Generator ID |
| // Let the BIOS SMI hook handle this request |
| return biosSMIMessageHook(selData, ipmiRaw); |
| break; |
| |
| case 0x2C: // Message from Intel ME |
| return me::messageHook(selData, ipmiRaw); |
| break; |
| } |
| |
| // No hooks handled the request, so let it go to default |
| return defaultMessageHook(ipmiRaw); |
| } |
| } // namespace redfish_hooks |
| |
| bool checkRedfishHooks(uint16_t recordID, uint8_t recordType, |
| uint32_t timestamp, uint16_t generatorID, uint8_t evmRev, |
| uint8_t sensorType, uint8_t sensorNum, uint8_t eventType, |
| uint8_t eventData1, uint8_t eventData2, |
| uint8_t eventData3) |
| { |
| // Save the raw IPMI string of the request |
| std::string ipmiRaw; |
| std::array selBytes = {static_cast<uint8_t>(recordID), |
| static_cast<uint8_t>(recordID >> 8), |
| recordType, |
| static_cast<uint8_t>(timestamp), |
| static_cast<uint8_t>(timestamp >> 8), |
| static_cast<uint8_t>(timestamp >> 16), |
| static_cast<uint8_t>(timestamp >> 24), |
| static_cast<uint8_t>(generatorID), |
| static_cast<uint8_t>(generatorID >> 8), |
| evmRev, |
| sensorType, |
| sensorNum, |
| eventType, |
| eventData1, |
| eventData2, |
| eventData3}; |
| redfish_hooks::toHexStr(boost::beast::span<uint8_t>(selBytes), ipmiRaw); |
| |
| // First check that this is a system event record type since that |
| // determines the definition of the rest of the data |
| if (recordType != ipmi::sel::systemEvent) |
| { |
| // OEM record type, so let it go to the SEL |
| return redfish_hooks::defaultMessageHook(ipmiRaw); |
| } |
| |
| // Extract the SEL data for the hook |
| redfish_hooks::SELData selData = {.generatorID = generatorID, |
| .sensorNum = sensorNum, |
| .eventType = eventType, |
| .offset = eventData1 & 0x0F, |
| .eventData2 = eventData2, |
| .eventData3 = eventData3}; |
| |
| return redfish_hooks::startRedfishHook(selData, ipmiRaw); |
| } |
| |
| bool checkRedfishHooks(uint8_t generatorID, uint8_t evmRev, uint8_t sensorType, |
| uint8_t sensorNum, uint8_t eventType, uint8_t eventData1, |
| uint8_t eventData2, uint8_t eventData3) |
| { |
| // Save the raw IPMI string of the selData |
| std::string ipmiRaw; |
| std::array selBytes = {generatorID, evmRev, sensorType, sensorNum, |
| eventType, eventData1, eventData2, eventData3}; |
| redfish_hooks::toHexStr(boost::beast::span<uint8_t>(selBytes), ipmiRaw); |
| |
| // Extract the SEL data for the hook |
| redfish_hooks::SELData selData = {.generatorID = generatorID, |
| .sensorNum = sensorNum, |
| .eventType = eventType, |
| .offset = eventData1 & 0x0F, |
| .eventData2 = eventData2, |
| .eventData3 = eventData3}; |
| |
| return redfish_hooks::startRedfishHook(selData, ipmiRaw); |
| } |
| |
| } // namespace intel_oem::ipmi::sel |