| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #include <boost/container/flat_map.hpp> |
| #include <filesystem> |
| #include <fstream> |
| #include <ipmid/api.hpp> |
| #include <manufacturingcommands.hpp> |
| #include <oemcommands.hpp> |
| |
| namespace ipmi |
| { |
| |
| Manufacturing mtm; |
| |
| static auto revertTimeOut = |
| std::chrono::duration_cast<std::chrono::microseconds>( |
| std::chrono::seconds(60)); // 1 minute timeout |
| |
| static constexpr uint8_t slotAddressTypeBus = 0; |
| static constexpr uint8_t slotAddressTypeUniqueid = 1; |
| static constexpr uint8_t slotI2CMaxReadSize = 35; |
| |
| static constexpr const char* callbackMgrService = |
| "xyz.openbmc_project.CallbackManager"; |
| static constexpr const char* callbackMgrIntf = |
| "xyz.openbmc_project.CallbackManager"; |
| static constexpr const char* callbackMgrObjPath = |
| "/xyz/openbmc_project/CallbackManager"; |
| static constexpr const char* retriggerLedUpdate = "RetriggerLEDUpdate"; |
| |
| const static constexpr char* systemDService = "org.freedesktop.systemd1"; |
| const static constexpr char* systemDObjPath = "/org/freedesktop/systemd1"; |
| const static constexpr char* systemDMgrIntf = |
| "org.freedesktop.systemd1.Manager"; |
| const static constexpr char* pidControlService = "phosphor-pid-control.service"; |
| |
| static inline Cc resetMtmTimer(ipmi::Context::ptr ctx) |
| { |
| boost::system::error_code ec; |
| ctx->bus->yield_method_call<>(ctx->yield, ec, specialModeService, |
| specialModeObjPath, specialModeIntf, |
| "ResetTimer"); |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to reset the manufacturing mode timer"); |
| return ccUnspecifiedError; |
| } |
| return ccSuccess; |
| } |
| |
| int getGpioPathForSmSignal(const SmSignalGet signal, std::string& path) |
| { |
| switch (signal) |
| { |
| case SmSignalGet::smPowerButton: |
| path = "/xyz/openbmc_project/chassis/buttons/power"; |
| break; |
| case SmSignalGet::smResetButton: |
| path = "/xyz/openbmc_project/chassis/buttons/reset"; |
| break; |
| case SmSignalGet::smNMIButton: |
| path = "/xyz/openbmc_project/chassis/buttons/nmi"; |
| break; |
| case SmSignalGet::smIdentifyButton: |
| path = "/xyz/openbmc_project/chassis/buttons/id"; |
| break; |
| default: |
| return -1; |
| break; |
| } |
| return 0; |
| } |
| |
| ipmi_ret_t ledStoreAndSet(SmSignalSet signal, const std::string& setState) |
| { |
| LedProperty* ledProp = mtm.findLedProperty(signal); |
| if (ledProp == nullptr) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| std::string ledName = ledProp->getName(); |
| std::string ledService = ledServicePrefix + ledName; |
| std::string ledPath = ledPathPrefix + ledName; |
| ipmi::Value presentState; |
| |
| if (false == ledProp->getLock()) |
| { |
| if (mtm.getProperty(ledService.c_str(), ledPath.c_str(), ledIntf, |
| "State", &presentState) != 0) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| ledProp->setPrevState(std::get<std::string>(presentState)); |
| ledProp->setLock(true); |
| if (signal == SmSignalSet::smPowerFaultLed || |
| signal == SmSignalSet::smSystemReadyLed) |
| { |
| mtm.revertLedCallback = true; |
| } |
| } |
| if (mtm.setProperty(ledService, ledPath, ledIntf, "State", |
| ledStateStr + setState) != 0) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t ledRevert(SmSignalSet signal) |
| { |
| LedProperty* ledProp = mtm.findLedProperty(signal); |
| if (ledProp == nullptr) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| if (true == ledProp->getLock()) |
| { |
| ledProp->setLock(false); |
| if (signal == SmSignalSet::smPowerFaultLed || |
| signal == SmSignalSet::smSystemReadyLed) |
| { |
| try |
| { |
| ipmi::method_no_args::callDbusMethod( |
| *getSdBus(), callbackMgrService, callbackMgrObjPath, |
| callbackMgrIntf, retriggerLedUpdate); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| mtm.revertLedCallback = false; |
| } |
| else |
| { |
| std::string ledName = ledProp->getName(); |
| std::string ledService = ledServicePrefix + ledName; |
| std::string ledPath = ledPathPrefix + ledName; |
| if (mtm.setProperty(ledService, ledPath, ledIntf, "State", |
| ledProp->getPrevState()) != 0) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| } |
| } |
| return IPMI_CC_OK; |
| } |
| |
| void Manufacturing::initData() |
| { |
| ledPropertyList.push_back( |
| LedProperty(SmSignalSet::smPowerFaultLed, "status_amber")); |
| ledPropertyList.push_back( |
| LedProperty(SmSignalSet::smSystemReadyLed, "status_green")); |
| ledPropertyList.push_back( |
| LedProperty(SmSignalSet::smIdentifyLed, "identify")); |
| } |
| |
| void Manufacturing::revertTimerHandler() |
| { |
| if (revertFanPWM) |
| { |
| revertFanPWM = false; |
| disablePidControlService(false); |
| } |
| |
| for (const auto& ledProperty : ledPropertyList) |
| { |
| const std::string& ledName = ledProperty.getName(); |
| ledRevert(ledProperty.getSignal()); |
| } |
| } |
| |
| Manufacturing::Manufacturing() : |
| revertTimer([&](void) { revertTimerHandler(); }) |
| { |
| initData(); |
| } |
| |
| int8_t Manufacturing::getProperty(const std::string& service, |
| const std::string& path, |
| const std::string& interface, |
| const std::string& propertyName, |
| ipmi::Value* reply) |
| { |
| try |
| { |
| *reply = ipmi::getDbusProperty(*getSdBus(), service, path, interface, |
| propertyName); |
| } |
| catch (const sdbusplus::exception::SdBusError& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "ERROR: getProperty"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int8_t Manufacturing::setProperty(const std::string& service, |
| const std::string& path, |
| const std::string& interface, |
| const std::string& propertyName, |
| ipmi::Value value) |
| { |
| try |
| { |
| ipmi::setDbusProperty(*getSdBus(), service, path, interface, |
| propertyName, value); |
| } |
| catch (const sdbusplus::exception::SdBusError& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "ERROR: setProperty"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int8_t Manufacturing::disablePidControlService(const bool disable) |
| { |
| try |
| { |
| auto dbus = getSdBus(); |
| auto method = dbus->new_method_call(systemDService, systemDObjPath, |
| systemDMgrIntf, |
| disable ? "StopUnit" : "StartUnit"); |
| method.append(pidControlService, "replace"); |
| auto reply = dbus->call(method); |
| } |
| catch (const sdbusplus::exception::SdBusError& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "ERROR: phosphor-pid-control service start or stop failed"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| ipmi::RspType<uint8_t, // Signal value |
| std::optional<uint16_t> // Fan tach value |
| > |
| appMTMGetSignal(ipmi::Context::ptr ctx, uint8_t signalTypeByte, |
| uint8_t instance, uint8_t actionByte) |
| { |
| // mfg filter logic is used to allow MTM get signal command only in |
| // manfacturing mode. |
| |
| SmSignalGet signalType = static_cast<SmSignalGet>(signalTypeByte); |
| SmActionGet action = static_cast<SmActionGet>(actionByte); |
| |
| switch (signalType) |
| { |
| case SmSignalGet::smFanPwmGet: |
| { |
| ipmi::Value reply; |
| std::string fullPath = fanPwmPath + std::to_string(instance + 1); |
| if (mtm.getProperty(fanService, fullPath, fanIntf, "Value", |
| &reply) < 0) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| double* doubleVal = std::get_if<double>(&reply); |
| if (doubleVal == nullptr) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| uint8_t sensorVal = std::round(*doubleVal); |
| resetMtmTimer(ctx); |
| return ipmi::responseSuccess(sensorVal, std::nullopt); |
| } |
| break; |
| case SmSignalGet::smFanTachometerGet: |
| { |
| boost::system::error_code ec; |
| using objFlatMap = boost::container::flat_map< |
| std::string, boost::container::flat_map< |
| std::string, std::vector<std::string>>>; |
| |
| auto flatMap = ctx->bus->yield_method_call<objFlatMap>( |
| ctx->yield, ec, "xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree", |
| fanTachBasePath, 0, std::array<const char*, 1>{fanIntf}); |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to query fan tach sub tree objects"); |
| return ipmi::responseUnspecifiedError(); |
| } |
| if (instance >= flatMap.size()) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| auto itr = flatMap.nth(instance); |
| ipmi::Value reply; |
| if (mtm.getProperty(fanService, itr->first, fanIntf, "Value", |
| &reply) < 0) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| double* doubleVal = std::get_if<double>(&reply); |
| if (doubleVal == nullptr) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| uint8_t sensorVal = FAN_PRESENT | FAN_SENSOR_PRESENT; |
| std::optional<uint16_t> fanTach = std::round(*doubleVal); |
| |
| resetMtmTimer(ctx); |
| return ipmi::responseSuccess(sensorVal, fanTach); |
| } |
| break; |
| case SmSignalGet::smIdentifyButton: |
| { |
| if (action == SmActionGet::revert || action == SmActionGet::ignore) |
| { |
| // ButtonMasked property is not supported for ID button as it is |
| // unnecessary. Hence if requested for revert / ignore, override |
| // it to sample action to make tools happy. |
| action = SmActionGet::sample; |
| } |
| // fall-through |
| } |
| case SmSignalGet::smResetButton: |
| case SmSignalGet::smPowerButton: |
| case SmSignalGet::smNMIButton: |
| { |
| std::string path; |
| if (getGpioPathForSmSignal(signalType, path) < 0) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| switch (action) |
| { |
| case SmActionGet::sample: |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "case SmActionGet::sample"); |
| break; |
| case SmActionGet::ignore: |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "case SmActionGet::ignore"); |
| if (mtm.setProperty(buttonService, path, buttonIntf, |
| "ButtonMasked", true) < 0) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| } |
| break; |
| case SmActionGet::revert: |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "case SmActionGet::revert"); |
| if (mtm.setProperty(buttonService, path, buttonIntf, |
| "ButtonMasked", false) < 0) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| } |
| break; |
| |
| default: |
| return ipmi::responseInvalidFieldRequest(); |
| break; |
| } |
| |
| ipmi::Value reply; |
| if (mtm.getProperty(buttonService, path, buttonIntf, |
| "ButtonPressed", &reply) < 0) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| bool* valPtr = std::get_if<bool>(&reply); |
| if (valPtr == nullptr) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| resetMtmTimer(ctx); |
| uint8_t sensorVal = *valPtr; |
| return ipmi::responseSuccess(sensorVal, std::nullopt); |
| } |
| break; |
| case SmSignalGet::smNcsiDiag: |
| { |
| constexpr const char* netBasePath = "/sys/class/net/eth"; |
| constexpr const char* carrierSuffix = "/carrier"; |
| std::ifstream netIfs(netBasePath + std::to_string(instance) + |
| carrierSuffix); |
| if (!netIfs.good()) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| std::string carrier; |
| netIfs >> carrier; |
| resetMtmTimer(ctx); |
| return ipmi::responseSuccess( |
| static_cast<uint8_t>(std::stoi(carrier)), std::nullopt); |
| } |
| break; |
| default: |
| return ipmi::responseInvalidFieldRequest(); |
| break; |
| } |
| } |
| |
| ipmi::RspType<> appMTMSetSignal(ipmi::Context::ptr ctx, uint8_t signalTypeByte, |
| uint8_t instance, uint8_t actionByte, |
| std::optional<uint8_t> pwmSpeed) |
| { |
| // mfg filter logic is used to allow MTM set signal command only in |
| // manfacturing mode. |
| |
| SmSignalSet signalType = static_cast<SmSignalSet>(signalTypeByte); |
| SmActionSet action = static_cast<SmActionSet>(actionByte); |
| Cc retCode = ccSuccess; |
| int8_t ret = 0; |
| |
| switch (signalType) |
| { |
| case SmSignalSet::smPowerFaultLed: |
| case SmSignalSet::smSystemReadyLed: |
| case SmSignalSet::smIdentifyLed: |
| switch (action) |
| { |
| case SmActionSet::forceDeasserted: |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "case SmActionSet::forceDeasserted"); |
| |
| retCode = ledStoreAndSet(signalType, std::string("Off")); |
| if (retCode != ccSuccess) |
| { |
| return ipmi::response(retCode); |
| } |
| mtm.revertTimer.start(revertTimeOut); |
| } |
| break; |
| case SmActionSet::forceAsserted: |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "case SmActionSet::forceAsserted"); |
| |
| retCode = ledStoreAndSet(signalType, std::string("On")); |
| if (retCode != ccSuccess) |
| { |
| return ipmi::response(retCode); |
| } |
| mtm.revertTimer.start(revertTimeOut); |
| if (SmSignalSet::smPowerFaultLed == signalType) |
| { |
| // Deassert "system ready" |
| retCode = ledStoreAndSet(SmSignalSet::smSystemReadyLed, |
| std::string("Off")); |
| } |
| else if (SmSignalSet::smSystemReadyLed == signalType) |
| { |
| // Deassert "fault led" |
| retCode = ledStoreAndSet(SmSignalSet::smPowerFaultLed, |
| std::string("Off")); |
| } |
| } |
| break; |
| case SmActionSet::revert: |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "case SmActionSet::revert"); |
| retCode = ledRevert(signalType); |
| } |
| break; |
| default: |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| } |
| break; |
| case SmSignalSet::smFanPowerSpeed: |
| { |
| if ((action == SmActionSet::forceAsserted) && (!pwmSpeed)) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| |
| if ((action == SmActionSet::forceAsserted) && (*pwmSpeed > 100)) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| uint8_t pwmValue = 0; |
| switch (action) |
| { |
| case SmActionSet::revert: |
| { |
| if (mtm.revertFanPWM) |
| { |
| ret = mtm.disablePidControlService(false); |
| if (ret < 0) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| mtm.revertFanPWM = false; |
| } |
| } |
| break; |
| case SmActionSet::forceAsserted: |
| { |
| pwmValue = *pwmSpeed; |
| } // fall-through |
| case SmActionSet::forceDeasserted: |
| { |
| if (!mtm.revertFanPWM) |
| { |
| ret = mtm.disablePidControlService(true); |
| if (ret < 0) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| mtm.revertFanPWM = true; |
| } |
| mtm.revertTimer.start(revertTimeOut); |
| std::string fanPwmInstancePath = |
| fanPwmPath + std::to_string(instance + 1); |
| |
| ret = |
| mtm.setProperty(fanService, fanPwmInstancePath, fanIntf, |
| "Value", static_cast<double>(pwmValue)); |
| if (ret < 0) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| } |
| break; |
| default: |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| } |
| } |
| break; |
| default: |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| } |
| if (retCode == ccSuccess) |
| { |
| resetMtmTimer(ctx); |
| } |
| return ipmi::response(retCode); |
| } |
| |
| ipmi::RspType<> mtmKeepAlive(ipmi::Context::ptr ctx, uint8_t reserved, |
| const std::array<char, 5>& intentionalSignature) |
| { |
| // mfg filter logic is used to allow MTM keep alive command only in |
| // manfacturing mode |
| |
| constexpr std::array<char, 5> signatureOk = {'I', 'N', 'T', 'E', 'L'}; |
| if (intentionalSignature != signatureOk || reserved != 0) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| return ipmi::response(resetMtmTimer(ctx)); |
| } |
| |
| static constexpr unsigned int makeCmdKey(unsigned int netFn, unsigned int cmd) |
| { |
| return (netFn << 8) | cmd; |
| } |
| |
| ipmi::Cc mfgFilterMessage(ipmi::message::Request::ptr request) |
| { |
| // Restricted commands, must be executed only in Manufacturing mode |
| switch (makeCmdKey(request->ctx->netFn, request->ctx->cmd)) |
| { |
| // i2c master write read command needs additional checking |
| case makeCmdKey(ipmi::netFnApp, ipmi::app::cmdMasterWriteRead): |
| if (request->payload.size() > 4) |
| { |
| // Allow write data count > 1, only if it is in MFG mode |
| if (mtm.getAccessLvl() != MtmLvl::mtmAvailable) |
| { |
| return ipmi::ccInsufficientPrivilege; |
| } |
| } |
| break; |
| case makeCmdKey(ipmi::netFnOemOne, |
| ipmi::intel::general::cmdGetSmSignal): |
| case makeCmdKey(ipmi::netFnOemOne, |
| ipmi::intel::general::cmdSetSmSignal): |
| case makeCmdKey(ipmi::netFnOemOne, |
| ipmi::intel::general::cmdMtmKeepAlive): |
| case makeCmdKey(ipmi::netFnOemOne, |
| ipmi::intel::general::cmdSetManufacturingData): |
| case makeCmdKey(ipmi::netFnOemOne, |
| ipmi::intel::general::cmdGetManufacturingData): |
| case makeCmdKey(ipmi::netFnStorage, ipmi::storage::cmdWriteFruData): |
| |
| // Check for MTM mode |
| if (mtm.getAccessLvl() != MtmLvl::mtmAvailable) |
| { |
| return ipmi::ccInvalidCommand; |
| } |
| } |
| return ipmi::ccSuccess; |
| } |
| |
| static constexpr uint8_t maxEthSize = 6; |
| static constexpr uint8_t maxSupportedEth = 3; |
| static constexpr const char* factoryEthAddrBaseFileName = |
| "/var/sofs/factory-settings/network/mac/eth"; |
| |
| ipmi::RspType<> setManufacturingData(ipmi::Context::ptr ctx, uint8_t dataType, |
| std::array<uint8_t, maxEthSize> ethData) |
| { |
| // mfg filter logic will restrict this command executing only in mfg mode. |
| if (dataType >= maxSupportedEth) |
| { |
| return ipmi::responseParmOutOfRange(); |
| } |
| |
| constexpr uint8_t invalidData = 0; |
| constexpr uint8_t validData = 1; |
| constexpr uint8_t ethAddrStrSize = |
| 19; // XX:XX:XX:XX:XX:XX + \n + null termination; |
| std::vector<uint8_t> buff(ethAddrStrSize); |
| std::snprintf(reinterpret_cast<char*>(buff.data()), ethAddrStrSize, |
| "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx\n", ethData.at(0), |
| ethData.at(1), ethData.at(2), ethData.at(3), ethData.at(4), |
| ethData.at(5)); |
| std::ofstream oEthFile(factoryEthAddrBaseFileName + |
| std::to_string(dataType), |
| std::ofstream::out); |
| if (!oEthFile.good()) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| oEthFile << reinterpret_cast<char*>(buff.data()); |
| oEthFile << fflush; |
| oEthFile.close(); |
| |
| resetMtmTimer(ctx); |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi::RspType<uint8_t, std::array<uint8_t, maxEthSize>> |
| getManufacturingData(ipmi::Context::ptr ctx, uint8_t dataType) |
| { |
| // mfg filter logic will restrict this command executing only in mfg mode. |
| if (dataType >= maxSupportedEth) |
| { |
| return ipmi::responseParmOutOfRange(); |
| } |
| std::array<uint8_t, maxEthSize> ethData{0}; |
| constexpr uint8_t invalidData = 0; |
| constexpr uint8_t validData = 1; |
| |
| std::ifstream iEthFile(factoryEthAddrBaseFileName + |
| std::to_string(dataType), |
| std::ifstream::in); |
| if (!iEthFile.good()) |
| { |
| return ipmi::responseSuccess(invalidData, ethData); |
| } |
| std::string ethStr; |
| iEthFile >> ethStr; |
| uint8_t* data = ethData.data(); |
| std::sscanf(ethStr.c_str(), "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", |
| data, (data + 1), (data + 2), (data + 3), (data + 4), |
| (data + 5)); |
| |
| resetMtmTimer(ctx); |
| return ipmi::responseSuccess(validData, ethData); |
| } |
| |
| /** @brief implements slot master write read IPMI command which can be used for |
| * low-level I2C/SMBus write, read or write-read access for PCIE slots |
| * @param reserved - skip 6 bit |
| * @param addressType - address type |
| * @param bbSlotNum - baseboard slot number |
| * @param riserSlotNum - riser slot number |
| * @param reserved2 - skip 2 bit |
| * @param slaveAddr - slave address |
| * @param readCount - number of bytes to be read |
| * @param writeData - data to be written |
| * |
| * @returns IPMI completion code plus response data |
| */ |
| ipmi::RspType<std::vector<uint8_t>> |
| appSlotI2CMasterWriteRead(uint6_t reserved, uint2_t addressType, |
| uint3_t bbSlotNum, uint3_t riserSlotNum, |
| uint2_t resvered2, uint8_t slaveAddr, |
| uint8_t readCount, std::vector<uint8_t> writeData) |
| { |
| const size_t writeCount = writeData.size(); |
| std::string i2cBus; |
| if (addressType == slotAddressTypeBus) |
| { |
| std::string path = "/dev/i2c-mux/Riser_" + |
| std::to_string(static_cast<uint8_t>(bbSlotNum)) + |
| "_Mux/Pcie_Slot_" + |
| std::to_string(static_cast<uint8_t>(riserSlotNum)); |
| |
| if (std::filesystem::exists(path) && std::filesystem::is_symlink(path)) |
| { |
| i2cBus = std::filesystem::read_symlink(path); |
| } |
| else |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Master write read command: Cannot get BusID"); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| } |
| else if (addressType == slotAddressTypeUniqueid) |
| { |
| i2cBus = "/dev/i2c-" + |
| std::to_string(static_cast<uint8_t>(bbSlotNum) | |
| (static_cast<uint8_t>(riserSlotNum) << 3)); |
| } |
| else |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Master write read command: invalid request"); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| // Allow single byte write as it is offset byte to read the data, rest allow |
| // only in MFG mode. |
| if (writeCount > 1) |
| { |
| if (mtm.getAccessLvl() < MtmLvl::mtmAvailable) |
| { |
| return ipmi::responseInsufficientPrivilege(); |
| } |
| } |
| |
| if (readCount > slotI2CMaxReadSize) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Master write read command: Read count exceeds limit"); |
| return ipmi::responseParmOutOfRange(); |
| } |
| |
| if (!readCount && !writeCount) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Master write read command: Read & write count are 0"); |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| std::vector<uint8_t> readBuf(readCount); |
| |
| ipmi::Cc retI2C = ipmi::i2cWriteRead(i2cBus, slaveAddr, writeData, readBuf); |
| if (retI2C != ipmi::ccSuccess) |
| { |
| return ipmi::response(retI2C); |
| } |
| |
| return ipmi::responseSuccess(readBuf); |
| } |
| |
| ipmi::RspType<> clearCMOS() |
| { |
| // There is an i2c device on bus 4, the slave address is 0x70. Based on the |
| // spec, writing 0x1 to address 0x60 on this device, will trigger the clear |
| // CMOS action. |
| constexpr uint8_t slaveAddr = 0x70; |
| std::string i2cBus = "/dev/i2c-4"; |
| std::vector<uint8_t> writeData = {0x60, 0x1}; |
| std::vector<uint8_t> readBuf(0); |
| |
| // TODO Needs to enhance the below security checking |
| if (mtm.getAccessLvl() < MtmLvl::mtmAvailable) |
| { |
| return ipmi::responseInsufficientPrivilege(); |
| } |
| |
| ipmi::Cc retI2C = ipmi::i2cWriteRead(i2cBus, slaveAddr, writeData, readBuf); |
| return ipmi::response(retI2C); |
| } |
| } // namespace ipmi |
| |
| void register_mtm_commands() __attribute__((constructor)); |
| void register_mtm_commands() |
| { |
| // <Get SM Signal> |
| ipmi::registerHandler(ipmi::prioOemBase, ipmi::intel::netFnGeneral, |
| ipmi::intel::general::cmdGetSmSignal, |
| ipmi::Privilege::Admin, ipmi::appMTMGetSignal); |
| |
| ipmi::registerHandler(ipmi::prioOemBase, ipmi::intel::netFnGeneral, |
| ipmi::intel::general::cmdSetSmSignal, |
| ipmi::Privilege::Admin, ipmi::appMTMSetSignal); |
| |
| ipmi::registerHandler(ipmi::prioOemBase, ipmi::intel::netFnGeneral, |
| ipmi::intel::general::cmdMtmKeepAlive, |
| ipmi::Privilege::Admin, ipmi::mtmKeepAlive); |
| |
| ipmi::registerHandler(ipmi::prioOemBase, ipmi::intel::netFnGeneral, |
| ipmi::intel::general::cmdSetManufacturingData, |
| ipmi::Privilege::Admin, ipmi::setManufacturingData); |
| |
| ipmi::registerHandler(ipmi::prioOemBase, ipmi::intel::netFnGeneral, |
| ipmi::intel::general::cmdGetManufacturingData, |
| ipmi::Privilege::Admin, ipmi::getManufacturingData); |
| |
| ipmi::registerHandler(ipmi::prioOemBase, ipmi::intel::netFnApp, |
| ipmi::intel::general::cmdSlotI2CMasterWriteRead, |
| ipmi::Privilege::Admin, |
| ipmi::appSlotI2CMasterWriteRead); |
| |
| ipmi::registerHandler(ipmi::prioOemBase, ipmi::intel::netFnPlatform, |
| ipmi::intel::platform::cmdClearCMOS, |
| ipmi::Privilege::Admin, ipmi::clearCMOS); |
| |
| ipmi::registerFilter(ipmi::prioOemBase, |
| [](ipmi::message::Request::ptr request) { |
| return ipmi::mfgFilterMessage(request); |
| }); |
| } |