| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #pragma once |
| |
| #include <user_channel/user_layer.hpp> |
| enum class IPMINetfnIntelOEMGeneralCmd |
| { |
| cmdSetBIOSID = 0x26, |
| cmdGetOEMDeviceInfo = 0x27, |
| cmdGetAICSlotFRUIDSlotPosRecords = 0x31, |
| cmdSetSystemGUID = 0x41, |
| cmdSendEmbeddedFWUpdStatus = 0x44, |
| cmdSetPowerRestoreDelay = 0x54, |
| cmdGetPowerRestoreDelay = 0x55, |
| cmdSetFaultIndication = 0x57, |
| cmdSetOEMUser2Activation = 0x5A, |
| cmdSetSpecialUserPassword = 0x5F, |
| cmdSetShutdownPolicy = 0x60, |
| cmdGetShutdownPolicy = 0x62, |
| cmdSetFanConfig = 0x89, |
| cmdGetFanConfig = 0x8a, |
| cmdSetFanSpeedOffset = 0x8c, |
| cmdGetFanSpeedOffset = 0x8d, |
| cmdSetFscParameter = 0x90, |
| cmdGetFscParameter = 0x91, |
| cmdGetChassisIdentifier = 0x92, |
| cmdGetProcessorErrConfig = 0x9A, |
| cmdSetProcessorErrConfig = 0x9B, |
| cmdGetLEDStatus = 0xB0, |
| }; |
| |
| enum class IPMINetfnIntelOEMPlatformCmd |
| { |
| cmdCfgHostSerialPortSpeed = 0x90, |
| }; |
| |
| enum class IPMIIntelOEMReturnCodes |
| { |
| ipmiCCPayloadActive = 0x80, |
| ipmiCCInvalidPCIESlotID = 0x80, |
| ipmiCCParameterNotSupported = 0x80, |
| ipmiCCPayloadAlreadyDeactivated = 0x80, |
| ipmiCCSetInProcess = 0x81, |
| ipmiCCPayloadDisable = 0x81, |
| ipmiCCLostArbitration = 0x81, |
| ipmiCCInvalidCablePortIndex = 0x81, |
| ipmiCCHealthStatusNotAvailable = 0x81, |
| ipmiCCBusError = 0x82, |
| ipmiCCReadOnly = 0x82, |
| ipmiCCWriteOnly = 0x82, |
| ipmiCCNoCablePresent = 0x82, |
| ipmiCCDataCollectionInProgress = 0x82, |
| ipmiCCPayloadActivationLimitReached = 0x82, |
| ipmiCCNACKOnWrite = 0x83, |
| ipmiCCDataCollectionFailed = 0x83, |
| ipmiCCCanNotActivateWithEncrption = 0x83, |
| ipmiCCCanNotActivateWithoutEncryption = 0x84, |
| ipmiCCInvalidChecksum = 0x85, |
| ipmiCCNoCabledPCIEPortsAvailable = 0xC2, |
| |
| }; |
| |
| enum class IPMIReturnCodeExt |
| { |
| ipmiCCInvalidLUN = 0xC2, |
| ipmiCCTimeout = 0xC3, |
| ipmiCCStorageLeak = 0xC4, |
| ipmiCCRequestDataTruncated = 0xC6, |
| ipmiCCRequestDataFieldLengthLimitExceeded = 0xC8, |
| ipmiCCCanNotReturnNumberOfRequestedDataBytes = 0xCA, |
| ipmiCCRequestSensorDataRecordNotFound = 0xCB, |
| ipmiCCDestinationUnavailable = 0xD3, |
| ipmiCCParamterNotSupportInPresentState = 0xD5, |
| }; |
| |
| constexpr const uint8_t netfunIntelAppOEM = 0x3E; |
| static constexpr ipmi_netfn_t netfnIntcOEMGeneral = |
| NETFUN_NONE; // Netfun_none. In our platform, we use it as "intel oem |
| // general". The code is 0x30 |
| |
| // Intel OEM Platform code is 0x32 |
| static constexpr ipmi_netfn_t netfnIntcOEMPlatform = NETFUN_OEM; |
| static constexpr const uint8_t maxBIOSIDLength = 0xFF; |
| static constexpr const uint8_t maxCPUNum = 4; |
| static constexpr const char* biosObjPath = "/xyz/openbmc_project/bios"; |
| static constexpr const char* biosIntf = |
| "xyz.openbmc_project.Inventory.Item.Bios"; |
| static constexpr const char* biosProp = "BiosId"; |
| |
| static constexpr const char* powerRestoreDelayObjPath = |
| "/xyz/openbmc_project/control/power_restore_delay"; |
| static constexpr const char* powerRestoreDelayIntf = |
| "xyz.openbmc_project.Control.Power.RestoreDelay"; |
| static constexpr const char* powerRestoreDelayProp = "PowerRestoreDelay"; |
| static constexpr const char* processorErrConfigObjPath = |
| "/xyz/openbmc_project/control/processor_error_config"; |
| static constexpr const char* processorErrConfigIntf = |
| "xyz.openbmc_project.Control.Processor.ErrConfig"; |
| |
| static constexpr const char* postCodesObjPath = |
| "/xyz/openbmc_project/State/Boot/PostCode"; |
| static constexpr const char* postCodesIntf = |
| "xyz.openbmc_project.State.Boot.PostCode"; |
| |
| static constexpr const char* identifyLEDObjPath = |
| "/xyz/openbmc_project/led/physical/identify"; |
| static constexpr const char* ledIntf = "xyz.openbmc_project.Led.Physical"; |
| static constexpr const char* statusAmberObjPath = |
| "/xyz/openbmc_project/led/physical/status_amber"; |
| static constexpr const char* statusGreenObjPath = |
| "/xyz/openbmc_project/led/physical/status_green"; |
| |
| static constexpr const uint8_t noShutdownOnOCOT = 0; |
| static constexpr const uint8_t shutdownOnOCOT = 1; |
| static constexpr const uint8_t noShutdownPolicySupported = 0; |
| static constexpr const uint8_t shutdownPolicySupported = 1; |
| static constexpr const char* oemShutdownPolicyIntf = |
| "xyz.openbmc_project.Control.ShutdownPolicy"; |
| static constexpr const char* oemShutdownPolicyObjPath = |
| "/xyz/openbmc_project/control/shutdown_policy_config"; |
| static constexpr const char* oemShutdownPolicyObjPathProp = "Policy"; |
| |
| static constexpr const char* fwGetEnvCmd = "/sbin/fw_printenv"; |
| static constexpr const char* fwSetEnvCmd = "/sbin/fw_setenv"; |
| static constexpr const char* fwHostSerailCfgEnvName = "hostserialcfg"; |
| |
| constexpr const char* settingsBusName = "xyz.openbmc_project.Settings"; |
| |
| static constexpr const uint8_t getHostSerialCfgCmd = 0; |
| static constexpr const uint8_t setHostSerialCfgCmd = 1; |
| |
| // parameters: |
| // 0: host serial port 1 and 2 normal speed |
| // 1: host serial port 1 high spend, port 2 normal speed |
| // 2: host serial port 1 normal spend, port 2 high speed |
| // 3: host serial port 1 and 2 high speed |
| static constexpr const uint8_t HostSerialCfgParamMax = 3; |
| static constexpr uint8_t ipmiDefaultUserId = 2; |
| |
| static constexpr const uint8_t selEvtTargetMask = 0xF0; |
| static constexpr const uint8_t selEvtTargetShift = 4; |
| |
| static constexpr const uint8_t targetInstanceMask = 0x0E; |
| static constexpr const uint8_t targetInstanceShift = 1; |
| |
| enum class IPMINetfnIntelOEMAppCmd |
| { |
| mdrStatus = 0x20, |
| mdrComplete = 0x21, |
| mdrEvent = 0x22, |
| mdrRead = 0x23, |
| mdrWrite = 0x24, |
| mdrLock = 0x25, |
| mdr2AgentStatus = 0x30, |
| mdr2GetDir = 0x31, |
| mdr2GetDataInfo = 0x32, |
| mdr2LockData = 0x33, |
| mdr2UnlockData = 0x34, |
| mdr2GetDataBlock = 0x35, |
| mdr2SendDir = 0x38, |
| mdr2SendDataInfoOffer = 0x39, |
| mdr2SendDataInfo = 0x3a, |
| mdr2DataStart = 0x3b, |
| mdr2DataDone = 0x3c, |
| mdr2SendDataBlock = 0x3d, |
| }; |
| |
| enum class OEMDevEntityType |
| { |
| biosId, |
| devVer, |
| sdrVer, |
| }; |
| |
| enum class FWUpdateTarget : uint8_t |
| { |
| targetBMC = 0x0, |
| targetBIOS = 0x1, |
| targetME = 0x2, |
| targetOEMEWS = 0x4, |
| }; |
| |
| #pragma pack(push, 1) |
| struct GUIDData |
| { |
| uint8_t node1; |
| uint8_t node2; |
| uint8_t node3; |
| uint8_t node4; |
| uint8_t node5; |
| uint8_t node6; |
| uint8_t clock1; |
| uint8_t clock2; |
| uint8_t timeHigh1; |
| uint8_t timeHigh2; |
| uint8_t timeMid1; |
| uint8_t timeMid2; |
| uint8_t timeLow1; |
| uint8_t timeLow2; |
| uint8_t timeLow3; |
| uint8_t timeLow4; |
| }; |
| |
| struct DeviceInfo |
| { |
| uint8_t biosIDLength; |
| uint8_t biosId[maxBIOSIDLength]; |
| }; |
| |
| struct SetPowerRestoreDelayReq |
| { |
| uint8_t byteMSB; |
| uint8_t byteLSB; |
| }; |
| |
| struct GetPowerRestoreDelayRes |
| { |
| uint8_t byteMSB; |
| uint8_t byteLSB; |
| }; |
| |
| struct GetOemDeviceInfoReq |
| { |
| uint8_t entityType; |
| uint8_t countToRead; |
| uint8_t offset; |
| }; |
| |
| struct GetOemDeviceInfoRes |
| { |
| uint8_t resDatalen; |
| uint8_t data[maxBIOSIDLength]; |
| }; |
| |
| struct SetProcessorErrConfigReq |
| { |
| uint8_t resetCfg; // Reset Configuration |
| // [0]: CATERR Reset Enabled |
| // 0b: Disabled |
| // 1b: Enabled |
| // [1]: ERR2 Reset Enabled |
| // 0b: Disabled |
| // 1b: Enabled |
| // [7:2]: Reserved |
| uint8_t reserved; // Reserved |
| uint8_t |
| resetErrorOccurrenceCounts; // Reset Error Occurrence Counts |
| //[0]: Reset CPU Error Counts |
| // 0b: Keep CPU Error Counts |
| // 1b: Reset all CPU Error Counts to zero |
| //[7:1]: Reserved |
| }; |
| |
| struct GetProcessorErrConfigRes |
| { |
| uint8_t resetCfg; // Reset Configuration |
| // [0]: CATERR Reset Enabled |
| // 0b: Disabled |
| // 1b: Enabled |
| // [1]: ERR2 Reset Enabled |
| // 0b: Disabled |
| // 1b: Enabled |
| // [7:2]: Reserved |
| uint8_t reserved; // Reserved |
| char caterrStatus[maxCPUNum]; // for all CPUs including the non-legacy |
| // socket CPU CPU CATERR (Core Error) |
| // occurrence |
| // [5:0]: Error Occurrence Count |
| // [7:6]: CPU Status |
| // 00b: Disabled |
| // 01b: Enabled |
| // 11b: Not Present |
| }; |
| |
| struct GetOEMShutdownPolicyRes |
| { |
| uint8_t policy; |
| uint8_t policySupport; |
| }; |
| |
| struct SetFanConfigReq |
| { |
| uint8_t selectedProfile; |
| uint8_t flags; |
| // other parameters from previous generation are not supported |
| }; |
| |
| struct GetFanConfigResp |
| { |
| uint8_t supportMask; |
| uint8_t profileSupport; |
| uint8_t fanControlProfileEnable; |
| uint8_t flags; |
| uint8_t dimmPresenceMap[4]; |
| }; |
| |
| struct CfgHostSerialReq |
| { |
| uint8_t command; |
| uint8_t parameter; |
| }; |
| #pragma pack(pop) |
| |
| // |
| // Fault type enumeration |
| // |
| enum class RemoteFaultType |
| { |
| fan, // 0 |
| temperature, // 1 |
| power, // 2 |
| driveslot, // 3 |
| software, // 4 |
| memory, // 5 |
| max = 6 // 6 |
| }; |
| |
| // Enumeration for remote fault states as required by the HSC |
| // |
| enum class RemoteFaultState |
| { |
| // fault indicators |
| fanLEDs, |
| cpu1DimmLeds, |
| cpu2DimmLeds, |
| cpu3DimmLeds, |
| cpu4DimmLeds, |
| maxFaultState, |
| }; |
| |
| enum class DimmFaultType |
| { |
| cpu1cpu2Dimm, |
| cpu3cpu4Dimm, |
| maxFaultGroup, |
| }; |
| |
| enum class setFanProfileFlags : uint8_t |
| { |
| setFanProfile = 7, |
| setPerfAcousMode = 6, |
| // reserved [5:3] |
| performAcousSelect = 2 |
| // reserved [1:0] |
| }; |
| |
| enum class setFscParamFlags : uint8_t |
| { |
| tcontrol = 0x1, |
| pwmOffset = 0x2, |
| maxPwm = 0x3, |
| cfm = 0x4 |
| }; |