| /* |
| // Copyright (c) 2018 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #include "xyz/openbmc_project/Common/error.hpp" |
| #include "xyz/openbmc_project/Led/Physical/server.hpp" |
| |
| #include <systemd/sd-journal.h> |
| |
| #include <array> |
| #include <boost/container/flat_map.hpp> |
| #include <boost/process/child.hpp> |
| #include <boost/process/io.hpp> |
| #include <com/intel/Control/NMISource/server.hpp> |
| #include <com/intel/Control/OCOTShutdownPolicy/server.hpp> |
| #include <commandutils.hpp> |
| #include <filesystem> |
| #include <iostream> |
| #include <ipmid/api.hpp> |
| #include <ipmid/utils.hpp> |
| #include <nlohmann/json.hpp> |
| #include <oemcommands.hpp> |
| #include <phosphor-logging/log.hpp> |
| #include <sdbusplus/bus.hpp> |
| #include <sdbusplus/message/types.hpp> |
| #include <string> |
| #include <variant> |
| #include <vector> |
| #include <xyz/openbmc_project/Control/Boot/Mode/server.hpp> |
| #include <xyz/openbmc_project/Control/Boot/Source/server.hpp> |
| #include <xyz/openbmc_project/Control/PowerSupplyRedundancy/server.hpp> |
| #include <xyz/openbmc_project/Control/Security/RestrictionMode/server.hpp> |
| |
| namespace ipmi |
| { |
| static void registerOEMFunctions() __attribute__((constructor)); |
| |
| namespace netfn::intel |
| { |
| constexpr NetFn oemGeneral = netFnOemOne; |
| constexpr Cmd cmdRestoreConfiguration = 0x02; |
| } // namespace netfn::intel |
| |
| static constexpr size_t maxFRUStringLength = 0x3F; |
| |
| static constexpr auto ethernetIntf = |
| "xyz.openbmc_project.Network.EthernetInterface"; |
| static constexpr auto networkIPIntf = "xyz.openbmc_project.Network.IP"; |
| static constexpr auto networkService = "xyz.openbmc_project.Network"; |
| static constexpr auto networkRoot = "/xyz/openbmc_project/network"; |
| |
| static constexpr const char* oemNmiSourceIntf = "com.intel.Control.NMISource"; |
| static constexpr const char* oemNmiSourceObjPath = |
| "/com/intel/control/NMISource"; |
| static constexpr const char* oemNmiBmcSourceObjPathProp = "BMCSource"; |
| static constexpr const char* oemNmiEnabledObjPathProp = "Enabled"; |
| |
| static constexpr const char* dimmOffsetFile = "/var/lib/ipmi/ipmi_dimms.json"; |
| |
| enum class NmiSource : uint8_t |
| { |
| none = 0, |
| fpBtn = 1, |
| wdPreTimeout = 2, |
| pefMatch = 3, |
| chassisCmd = 4, |
| memoryError = 5, |
| pciSerrPerr = 6, |
| southbridgeNmi = 7, |
| chipsetNmi = 8, |
| }; |
| |
| static constexpr const char* restricionModeService = |
| "xyz.openbmc_project.RestrictionMode.Manager"; |
| static constexpr const char* restricionModeBasePath = |
| "/xyz/openbmc_project/control/security/restriction_mode"; |
| static constexpr const char* restricionModeIntf = |
| "xyz.openbmc_project.Control.Security.RestrictionMode"; |
| static constexpr const char* restricionModeProperty = "RestrictionMode"; |
| |
| static constexpr const char* specialModeService = |
| "xyz.openbmc_project.SpecialMode"; |
| static constexpr const char* specialModeBasePath = |
| "/xyz/openbmc_project/security/specialMode"; |
| static constexpr const char* specialModeIntf = |
| "xyz.openbmc_project.Security.SpecialMode"; |
| static constexpr const char* specialModeProperty = "SpecialMode"; |
| |
| static constexpr const char* dBusPropertyIntf = |
| "org.freedesktop.DBus.Properties"; |
| static constexpr const char* dBusPropertyGetMethod = "Get"; |
| static constexpr const char* dBusPropertySetMethod = "Set"; |
| |
| // return code: 0 successful |
| int8_t getChassisSerialNumber(sdbusplus::bus::bus& bus, std::string& serial) |
| { |
| std::string objpath = "/xyz/openbmc_project/FruDevice"; |
| std::string intf = "xyz.openbmc_project.FruDeviceManager"; |
| std::string service = getService(bus, intf, objpath); |
| ObjectValueTree valueTree = getManagedObjects(bus, service, "/"); |
| if (valueTree.empty()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "No object implements interface", |
| phosphor::logging::entry("INTF=%s", intf.c_str())); |
| return -1; |
| } |
| |
| for (const auto& item : valueTree) |
| { |
| auto interface = item.second.find("xyz.openbmc_project.FruDevice"); |
| if (interface == item.second.end()) |
| { |
| continue; |
| } |
| |
| auto property = interface->second.find("CHASSIS_SERIAL_NUMBER"); |
| if (property == interface->second.end()) |
| { |
| continue; |
| } |
| |
| try |
| { |
| Value variant = property->second; |
| std::string& result = std::get<std::string>(variant); |
| if (result.size() > maxFRUStringLength) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "FRU serial number exceed maximum length"); |
| return -1; |
| } |
| serial = result; |
| return 0; |
| } |
| catch (std::bad_variant_access& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return -1; |
| } |
| } |
| return -1; |
| } |
| |
| ipmi_ret_t ipmiOEMWildcard(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| printCommand(+netfn, +cmd); |
| // Status code. |
| ipmi_ret_t rc = IPMI_CC_INVALID; |
| *dataLen = 0; |
| return rc; |
| } |
| |
| // Returns the Chassis Identifier (serial #) |
| ipmi_ret_t ipmiOEMGetChassisIdentifier(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, |
| ipmi_context_t context) |
| { |
| std::string serial; |
| if (*dataLen != 0) // invalid request if there are extra parameters |
| { |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| if (getChassisSerialNumber(*dbus, serial) == 0) |
| { |
| *dataLen = serial.size(); // length will never exceed response length |
| // as it is checked in getChassisSerialNumber |
| char* resp = static_cast<char*>(response); |
| serial.copy(resp, *dataLen); |
| return IPMI_CC_OK; |
| } |
| *dataLen = 0; |
| return IPMI_CC_RESPONSE_ERROR; |
| } |
| |
| ipmi_ret_t ipmiOEMSetSystemGUID(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| static constexpr size_t safeBufferLength = 50; |
| char buf[safeBufferLength] = {0}; |
| GUIDData* Data = reinterpret_cast<GUIDData*>(request); |
| |
| if (*dataLen != sizeof(GUIDData)) // 16bytes |
| { |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| *dataLen = 0; |
| |
| snprintf( |
| buf, safeBufferLength, |
| "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x", |
| Data->timeLow4, Data->timeLow3, Data->timeLow2, Data->timeLow1, |
| Data->timeMid2, Data->timeMid1, Data->timeHigh2, Data->timeHigh1, |
| Data->clock2, Data->clock1, Data->node6, Data->node5, Data->node4, |
| Data->node3, Data->node2, Data->node1); |
| // UUID is in RFC4122 format. Ex: 61a39523-78f2-11e5-9862-e6402cfc3223 |
| std::string guid = buf; |
| |
| std::string objpath = "/xyz/openbmc_project/control/host0/systemGUID"; |
| std::string intf = "xyz.openbmc_project.Common.UUID"; |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = getService(*dbus, intf, objpath); |
| setDbusProperty(*dbus, service, objpath, intf, "UUID", guid); |
| return IPMI_CC_OK; |
| } |
| |
| ipmi::RspType<> ipmiOEMDisableBMCSystemReset(bool disableResetOnSMI, |
| uint7_t reserved1) |
| { |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| |
| try |
| { |
| auto service = |
| ipmi::getService(*busp, bmcResetDisablesIntf, bmcResetDisablesPath); |
| ipmi::setDbusProperty(*busp, service, bmcResetDisablesPath, |
| bmcResetDisablesIntf, "ResetOnSMI", |
| !disableResetOnSMI); |
| } |
| catch (std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to set BMC reset disables", |
| phosphor::logging::entry("EXCEPTION=%s", e.what())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi::RspType<bool, // disableResetOnSMI |
| uint7_t // reserved |
| > |
| ipmiOEMGetBMCResetDisables() |
| { |
| bool disableResetOnSMI = true; |
| |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| try |
| { |
| auto service = |
| ipmi::getService(*busp, bmcResetDisablesIntf, bmcResetDisablesPath); |
| Value variant = |
| ipmi::getDbusProperty(*busp, service, bmcResetDisablesPath, |
| bmcResetDisablesIntf, "ResetOnSMI"); |
| disableResetOnSMI = !std::get<bool>(variant); |
| } |
| catch (std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to get BMC reset disables", |
| phosphor::logging::entry("EXCEPTION=%s", e.what())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| return ipmi::responseSuccess(disableResetOnSMI, 0); |
| } |
| |
| ipmi_ret_t ipmiOEMSetBIOSID(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| DeviceInfo* data = reinterpret_cast<DeviceInfo*>(request); |
| |
| if ((*dataLen < 2) || (*dataLen != (1 + data->biosIDLength))) |
| { |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| std::string idString((char*)data->biosId, data->biosIDLength); |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = getService(*dbus, biosIntf, biosObjPath); |
| setDbusProperty(*dbus, service, biosObjPath, biosIntf, biosProp, idString); |
| uint8_t* bytesWritten = static_cast<uint8_t*>(response); |
| *bytesWritten = |
| data->biosIDLength; // how many bytes are written into storage |
| *dataLen = 1; |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t ipmiOEMGetDeviceInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| GetOemDeviceInfoReq* req = reinterpret_cast<GetOemDeviceInfoReq*>(request); |
| GetOemDeviceInfoRes* res = reinterpret_cast<GetOemDeviceInfoRes*>(response); |
| |
| if (*dataLen == 0) |
| { |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| size_t reqDataLen = *dataLen; |
| *dataLen = 0; |
| if (req->entityType > static_cast<uint8_t>(OEMDevEntityType::sdrVer)) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| // handle OEM command items |
| switch (OEMDevEntityType(req->entityType)) |
| { |
| case OEMDevEntityType::biosId: |
| { |
| if (sizeof(GetOemDeviceInfoReq) != reqDataLen) |
| { |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = getService(*dbus, biosIntf, biosObjPath); |
| try |
| { |
| Value variant = getDbusProperty(*dbus, service, biosObjPath, |
| biosIntf, biosProp); |
| std::string& idString = std::get<std::string>(variant); |
| if (req->offset >= idString.size()) |
| { |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| size_t length = 0; |
| if (req->countToRead > (idString.size() - req->offset)) |
| { |
| length = idString.size() - req->offset; |
| } |
| else |
| { |
| length = req->countToRead; |
| } |
| std::copy(idString.begin() + req->offset, idString.end(), |
| res->data); |
| res->resDatalen = length; |
| *dataLen = res->resDatalen + 1; |
| } |
| catch (std::bad_variant_access& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| } |
| break; |
| |
| case OEMDevEntityType::devVer: |
| case OEMDevEntityType::sdrVer: |
| // TODO: |
| return IPMI_CC_ILLEGAL_COMMAND; |
| default: |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t ipmiOEMGetAICFRU(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| if (*dataLen != 0) |
| { |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| *dataLen = 1; |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| // temporary fix. We don't support AIC FRU now. Just tell BIOS that no |
| // AIC is available so that BIOS will not timeout repeatly which leads to |
| // slow booting. |
| *res = 0; // Byte1=Count of SlotPosition/FruID records. |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t ipmiOEMGetPowerRestoreDelay(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, |
| ipmi_context_t context) |
| { |
| GetPowerRestoreDelayRes* resp = |
| reinterpret_cast<GetPowerRestoreDelayRes*>(response); |
| |
| if (*dataLen != 0) |
| { |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = |
| getService(*dbus, powerRestoreDelayIntf, powerRestoreDelayObjPath); |
| Value variant = |
| getDbusProperty(*dbus, service, powerRestoreDelayObjPath, |
| powerRestoreDelayIntf, powerRestoreDelayProp); |
| |
| uint16_t delay = std::get<uint16_t>(variant); |
| resp->byteLSB = delay; |
| resp->byteMSB = delay >> 8; |
| |
| *dataLen = sizeof(GetPowerRestoreDelayRes); |
| |
| return IPMI_CC_OK; |
| } |
| |
| static uint8_t bcdToDec(uint8_t val) |
| { |
| return ((val / 16 * 10) + (val % 16)); |
| } |
| |
| // Allows an update utility or system BIOS to send the status of an embedded |
| // firmware update attempt to the BMC. After received, BMC will create a logging |
| // record. |
| ipmi::RspType<> ipmiOEMSendEmbeddedFwUpdStatus(uint8_t status, uint8_t target, |
| uint8_t majorRevision, |
| uint8_t minorRevision, |
| uint32_t auxInfo) |
| { |
| std::string firmware; |
| int instance = (target & targetInstanceMask) >> targetInstanceShift; |
| target = (target & selEvtTargetMask) >> selEvtTargetShift; |
| |
| /* make sure the status is 0, 1, or 2 as per the spec */ |
| if (status > 2) |
| { |
| return ipmi::response(ipmi::ccInvalidFieldRequest); |
| } |
| /* make sure the target is 0, 1, 2, or 4 as per the spec */ |
| if (target > 4 || target == 3) |
| { |
| return ipmi::response(ipmi::ccInvalidFieldRequest); |
| } |
| /*orignal OEM command is to record OEM SEL. |
| But openbmc does not support OEM SEL, so we redirect it to redfish event |
| logging. */ |
| std::string buildInfo; |
| std::string action; |
| switch (FWUpdateTarget(target)) |
| { |
| case FWUpdateTarget::targetBMC: |
| firmware = "BMC"; |
| buildInfo = "major: " + std::to_string(majorRevision) + " minor: " + |
| std::to_string(bcdToDec(minorRevision)) + // BCD encoded |
| " BuildID: " + std::to_string(auxInfo); |
| buildInfo += std::to_string(auxInfo); |
| break; |
| case FWUpdateTarget::targetBIOS: |
| firmware = "BIOS"; |
| buildInfo = |
| "major: " + |
| std::to_string(bcdToDec(majorRevision)) + // BCD encoded |
| " minor: " + |
| std::to_string(bcdToDec(minorRevision)) + // BCD encoded |
| " ReleaseNumber: " + // ASCII encoded |
| std::to_string(static_cast<uint8_t>(auxInfo >> 0) - '0') + |
| std::to_string(static_cast<uint8_t>(auxInfo >> 8) - '0') + |
| std::to_string(static_cast<uint8_t>(auxInfo >> 16) - '0') + |
| std::to_string(static_cast<uint8_t>(auxInfo >> 24) - '0'); |
| break; |
| case FWUpdateTarget::targetME: |
| firmware = "ME"; |
| buildInfo = |
| "major: " + std::to_string(majorRevision) + " minor1: " + |
| std::to_string(bcdToDec(minorRevision)) + // BCD encoded |
| " minor2: " + |
| std::to_string(bcdToDec(static_cast<uint8_t>(auxInfo >> 0))) + |
| " build1: " + |
| std::to_string(bcdToDec(static_cast<uint8_t>(auxInfo >> 8))) + |
| " build2: " + |
| std::to_string(bcdToDec(static_cast<uint8_t>(auxInfo >> 16))); |
| break; |
| case FWUpdateTarget::targetOEMEWS: |
| firmware = "EWS"; |
| buildInfo = "major: " + std::to_string(majorRevision) + " minor: " + |
| std::to_string(bcdToDec(minorRevision)) + // BCD encoded |
| " BuildID: " + std::to_string(auxInfo); |
| break; |
| } |
| |
| static const std::string openBMCMessageRegistryVersion("0.1"); |
| std::string redfishMsgID = "OpenBMC." + openBMCMessageRegistryVersion; |
| |
| switch (status) |
| { |
| case 0x0: |
| action = "update started"; |
| redfishMsgID += ".FirmwareUpdateStarted"; |
| break; |
| case 0x1: |
| action = "update completed successfully"; |
| redfishMsgID += ".FirmwareUpdateCompleted"; |
| break; |
| case 0x2: |
| action = "update failure"; |
| redfishMsgID += ".FirmwareUpdateFailed"; |
| break; |
| default: |
| action = "unknown"; |
| break; |
| } |
| |
| std::string firmwareInstanceStr = |
| firmware + " instance: " + std::to_string(instance); |
| std::string message("[firmware update] " + firmwareInstanceStr + |
| " status: <" + action + "> " + buildInfo); |
| |
| sd_journal_send("MESSAGE=%s", message.c_str(), "PRIORITY=%i", LOG_INFO, |
| "REDFISH_MESSAGE_ID=%s", redfishMsgID.c_str(), |
| "REDFISH_MESSAGE_ARGS=%s,%s", firmwareInstanceStr.c_str(), |
| buildInfo.c_str(), NULL); |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi_ret_t ipmiOEMSetPowerRestoreDelay(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, |
| ipmi_context_t context) |
| { |
| SetPowerRestoreDelayReq* data = |
| reinterpret_cast<SetPowerRestoreDelayReq*>(request); |
| uint16_t delay = 0; |
| |
| if (*dataLen != sizeof(SetPowerRestoreDelayReq)) |
| { |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| delay = data->byteMSB; |
| delay = (delay << 8) | data->byteLSB; |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = |
| getService(*dbus, powerRestoreDelayIntf, powerRestoreDelayObjPath); |
| setDbusProperty(*dbus, service, powerRestoreDelayObjPath, |
| powerRestoreDelayIntf, powerRestoreDelayProp, delay); |
| *dataLen = 0; |
| |
| return IPMI_CC_OK; |
| } |
| |
| static bool cpuPresent(const std::string& cpuName) |
| { |
| static constexpr const char* cpuPresencePathPrefix = |
| "/xyz/openbmc_project/inventory/system/chassis/motherboard/"; |
| static constexpr const char* cpuPresenceIntf = |
| "xyz.openbmc_project.Inventory.Item"; |
| std::string cpuPresencePath = cpuPresencePathPrefix + cpuName; |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| try |
| { |
| auto service = |
| ipmi::getService(*busp, cpuPresenceIntf, cpuPresencePath); |
| |
| ipmi::Value result = ipmi::getDbusProperty( |
| *busp, service, cpuPresencePath, cpuPresenceIntf, "Present"); |
| return std::get<bool>(result); |
| } |
| catch (const std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "Cannot find processor presence", |
| phosphor::logging::entry("NAME=%s", cpuName.c_str())); |
| return false; |
| } |
| } |
| |
| ipmi::RspType<bool, // CATERR Reset Enabled |
| bool, // ERR2 Reset Enabled |
| uint6_t, // reserved |
| uint8_t, // reserved, returns 0x3F |
| uint6_t, // CPU1 CATERR Count |
| uint2_t, // CPU1 Status |
| uint6_t, // CPU2 CATERR Count |
| uint2_t, // CPU2 Status |
| uint6_t, // CPU3 CATERR Count |
| uint2_t, // CPU3 Status |
| uint6_t, // CPU4 CATERR Count |
| uint2_t, // CPU4 Status |
| uint8_t // Crashdump Count |
| > |
| ipmiOEMGetProcessorErrConfig() |
| { |
| bool resetOnCATERR = false; |
| bool resetOnERR2 = false; |
| uint6_t cpu1CATERRCount = 0; |
| uint6_t cpu2CATERRCount = 0; |
| uint6_t cpu3CATERRCount = 0; |
| uint6_t cpu4CATERRCount = 0; |
| uint8_t crashdumpCount = 0; |
| uint2_t cpu1Status = |
| cpuPresent("CPU_1") ? CPUStatus::enabled : CPUStatus::notPresent; |
| uint2_t cpu2Status = |
| cpuPresent("CPU_2") ? CPUStatus::enabled : CPUStatus::notPresent; |
| uint2_t cpu3Status = |
| cpuPresent("CPU_3") ? CPUStatus::enabled : CPUStatus::notPresent; |
| uint2_t cpu4Status = |
| cpuPresent("CPU_4") ? CPUStatus::enabled : CPUStatus::notPresent; |
| |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| try |
| { |
| auto service = ipmi::getService(*busp, processorErrConfigIntf, |
| processorErrConfigObjPath); |
| |
| ipmi::PropertyMap result = ipmi::getAllDbusProperties( |
| *busp, service, processorErrConfigObjPath, processorErrConfigIntf); |
| resetOnCATERR = std::get<bool>(result.at("ResetOnCATERR")); |
| resetOnERR2 = std::get<bool>(result.at("ResetOnERR2")); |
| cpu1CATERRCount = std::get<uint8_t>(result.at("ErrorCountCPU1")); |
| cpu2CATERRCount = std::get<uint8_t>(result.at("ErrorCountCPU2")); |
| cpu3CATERRCount = std::get<uint8_t>(result.at("ErrorCountCPU3")); |
| cpu4CATERRCount = std::get<uint8_t>(result.at("ErrorCountCPU4")); |
| crashdumpCount = std::get<uint8_t>(result.at("CrashdumpCount")); |
| } |
| catch (const std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to fetch processor error config", |
| phosphor::logging::entry("ERROR=%s", e.what())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| return ipmi::responseSuccess(resetOnCATERR, resetOnERR2, 0, 0x3F, |
| cpu1CATERRCount, cpu1Status, cpu2CATERRCount, |
| cpu2Status, cpu3CATERRCount, cpu3Status, |
| cpu4CATERRCount, cpu4Status, crashdumpCount); |
| } |
| |
| ipmi::RspType<> ipmiOEMSetProcessorErrConfig( |
| bool resetOnCATERR, bool resetOnERR2, uint6_t reserved1, uint8_t reserved2, |
| std::optional<bool> clearCPUErrorCount, |
| std::optional<bool> clearCrashdumpCount, std::optional<uint6_t> reserved3) |
| { |
| std::shared_ptr<sdbusplus::asio::connection> busp = getSdBus(); |
| |
| try |
| { |
| auto service = ipmi::getService(*busp, processorErrConfigIntf, |
| processorErrConfigObjPath); |
| ipmi::setDbusProperty(*busp, service, processorErrConfigObjPath, |
| processorErrConfigIntf, "ResetOnCATERR", |
| resetOnCATERR); |
| ipmi::setDbusProperty(*busp, service, processorErrConfigObjPath, |
| processorErrConfigIntf, "ResetOnERR2", |
| resetOnERR2); |
| if (clearCPUErrorCount.value_or(false)) |
| { |
| ipmi::setDbusProperty(*busp, service, processorErrConfigObjPath, |
| processorErrConfigIntf, "ErrorCountCPU1", |
| static_cast<uint8_t>(0)); |
| ipmi::setDbusProperty(*busp, service, processorErrConfigObjPath, |
| processorErrConfigIntf, "ErrorCountCPU2", |
| static_cast<uint8_t>(0)); |
| ipmi::setDbusProperty(*busp, service, processorErrConfigObjPath, |
| processorErrConfigIntf, "ErrorCountCPU3", |
| static_cast<uint8_t>(0)); |
| ipmi::setDbusProperty(*busp, service, processorErrConfigObjPath, |
| processorErrConfigIntf, "ErrorCountCPU4", |
| static_cast<uint8_t>(0)); |
| } |
| if (clearCrashdumpCount.value_or(false)) |
| { |
| ipmi::setDbusProperty(*busp, service, processorErrConfigObjPath, |
| processorErrConfigIntf, "CrashdumpCount", |
| static_cast<uint8_t>(0)); |
| } |
| } |
| catch (std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to set processor error config", |
| phosphor::logging::entry("EXCEPTION=%s", e.what())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi_ret_t ipmiOEMGetShutdownPolicy(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, |
| ipmi_context_t context) |
| { |
| GetOEMShutdownPolicyRes* resp = |
| reinterpret_cast<GetOEMShutdownPolicyRes*>(response); |
| |
| if (*dataLen != 0) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "oem_get_shutdown_policy: invalid input len!"); |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| *dataLen = 0; |
| |
| try |
| { |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = |
| getService(*dbus, oemShutdownPolicyIntf, oemShutdownPolicyObjPath); |
| Value variant = getDbusProperty( |
| *dbus, service, oemShutdownPolicyObjPath, oemShutdownPolicyIntf, |
| oemShutdownPolicyObjPathProp); |
| |
| if (sdbusplus::com::intel::Control::server::OCOTShutdownPolicy:: |
| convertPolicyFromString(std::get<std::string>(variant)) == |
| sdbusplus::com::intel::Control::server::OCOTShutdownPolicy::Policy:: |
| NoShutdownOnOCOT) |
| { |
| resp->policy = 0; |
| } |
| else if (sdbusplus::com::intel::Control::server::OCOTShutdownPolicy:: |
| convertPolicyFromString(std::get<std::string>(variant)) == |
| sdbusplus::com::intel::Control::server::OCOTShutdownPolicy:: |
| Policy::ShutdownOnOCOT) |
| { |
| resp->policy = 1; |
| } |
| else |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "oem_set_shutdown_policy: invalid property!", |
| phosphor::logging::entry( |
| "PROP=%s", std::get<std::string>(variant).c_str())); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| // TODO needs to check if it is multi-node products, |
| // policy is only supported on node 3/4 |
| resp->policySupport = shutdownPolicySupported; |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.description()); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| *dataLen = sizeof(GetOEMShutdownPolicyRes); |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t ipmiOEMSetShutdownPolicy(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| sdbusplus::com::intel::Control::server::OCOTShutdownPolicy::Policy policy = |
| sdbusplus::com::intel::Control::server::OCOTShutdownPolicy::Policy:: |
| NoShutdownOnOCOT; |
| |
| // TODO needs to check if it is multi-node products, |
| // policy is only supported on node 3/4 |
| if (*dataLen != 1) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "oem_set_shutdown_policy: invalid input len!"); |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| *dataLen = 0; |
| if ((*req != noShutdownOnOCOT) && (*req != shutdownOnOCOT)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "oem_set_shutdown_policy: invalid input!"); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| if (*req == noShutdownOnOCOT) |
| { |
| policy = sdbusplus::com::intel::Control::server::OCOTShutdownPolicy:: |
| Policy::NoShutdownOnOCOT; |
| } |
| else |
| { |
| policy = sdbusplus::com::intel::Control::server::OCOTShutdownPolicy:: |
| Policy::ShutdownOnOCOT; |
| } |
| |
| try |
| { |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = |
| getService(*dbus, oemShutdownPolicyIntf, oemShutdownPolicyObjPath); |
| setDbusProperty( |
| *dbus, service, oemShutdownPolicyObjPath, oemShutdownPolicyIntf, |
| oemShutdownPolicyObjPathProp, |
| sdbusplus::com::intel::Control::server::convertForMessage(policy)); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.description()); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| return IPMI_CC_OK; |
| } |
| |
| /** @brief implementation for check the DHCP or not in IPv4 |
| * @param[in] Channel - Channel number |
| * @returns true or false. |
| */ |
| static bool isDHCPEnabled(uint8_t Channel) |
| { |
| try |
| { |
| auto ethdevice = getChannelName(Channel); |
| if (ethdevice.empty()) |
| { |
| return false; |
| } |
| auto ethIP = ethdevice + "/ipv4"; |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| auto ethernetObj = |
| getDbusObject(*dbus, networkIPIntf, networkRoot, ethIP); |
| auto value = getDbusProperty(*dbus, networkService, ethernetObj.first, |
| networkIPIntf, "Origin"); |
| if (std::get<std::string>(value) == |
| "xyz.openbmc_project.Network.IP.AddressOrigin.DHCP") |
| { |
| return true; |
| } |
| else |
| { |
| return false; |
| } |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.description()); |
| return true; |
| } |
| } |
| |
| /** @brief implementes for check the DHCP or not in IPv6 |
| * @param[in] Channel - Channel number |
| * @returns true or false. |
| */ |
| static bool isDHCPIPv6Enabled(uint8_t Channel) |
| { |
| |
| try |
| { |
| auto ethdevice = getChannelName(Channel); |
| if (ethdevice.empty()) |
| { |
| return false; |
| } |
| auto ethIP = ethdevice + "/ipv6"; |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| auto objectInfo = |
| getDbusObject(*dbus, networkIPIntf, networkRoot, ethIP); |
| auto properties = getAllDbusProperties(*dbus, objectInfo.second, |
| objectInfo.first, networkIPIntf); |
| if (std::get<std::string>(properties["Origin"]) == |
| "xyz.openbmc_project.Network.IP.AddressOrigin.DHCP") |
| { |
| return true; |
| } |
| else |
| { |
| return false; |
| } |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.description()); |
| return true; |
| } |
| } |
| |
| /** @brief implementes the creating of default new user |
| * @param[in] userName - new username in 16 bytes. |
| * @param[in] userPassword - new password in 20 bytes |
| * @returns ipmi completion code. |
| */ |
| ipmi::RspType<> ipmiOEMSetUser2Activation( |
| std::array<uint8_t, ipmi::ipmiMaxUserName>& userName, |
| std::array<uint8_t, ipmi::maxIpmi20PasswordSize>& userPassword) |
| { |
| bool userState = false; |
| // Check for System Interface not exist and LAN should be static |
| for (uint8_t channel = 0; channel < maxIpmiChannels; channel++) |
| { |
| ChannelInfo chInfo; |
| try |
| { |
| getChannelInfo(channel, chInfo); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetUser2Activation: Failed to get Channel Info", |
| phosphor::logging::entry("MSG: %s", e.description())); |
| return ipmi::response(ipmi::ccUnspecifiedError); |
| } |
| if (chInfo.mediumType == |
| static_cast<uint8_t>(EChannelMediumType::systemInterface)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetUser2Activation: system interface exist ."); |
| return ipmi::response(ipmi::ccCommandNotAvailable); |
| } |
| else |
| { |
| |
| if (chInfo.mediumType == |
| static_cast<uint8_t>(EChannelMediumType::lan8032)) |
| { |
| if (isDHCPIPv6Enabled(channel) || isDHCPEnabled(channel)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetUser2Activation: DHCP enabled ."); |
| return ipmi::response(ipmi::ccCommandNotAvailable); |
| } |
| } |
| } |
| } |
| uint8_t maxChUsers = 0, enabledUsers = 0, fixedUsers = 0; |
| if (ipmi::ccSuccess == |
| ipmiUserGetAllCounts(maxChUsers, enabledUsers, fixedUsers)) |
| { |
| if (enabledUsers > 1) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetUser2Activation: more than one user is enabled."); |
| return ipmi::response(ipmi::ccCommandNotAvailable); |
| } |
| // Check the user 2 is enabled or not |
| ipmiUserCheckEnabled(ipmiDefaultUserId, userState); |
| if (userState == true) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetUser2Activation: user 2 already enabled ."); |
| return ipmi::response(ipmi::ccCommandNotAvailable); |
| } |
| } |
| else |
| { |
| return ipmi::response(ipmi::ccUnspecifiedError); |
| } |
| |
| #if BYTE_ORDER == LITTLE_ENDIAN |
| PrivAccess privAccess = {PRIVILEGE_ADMIN, true, true, true, 0}; |
| #endif |
| #if BYTE_ORDER == BIG_ENDIAN |
| PrivAccess privAccess = {0, true, true, true, PRIVILEGE_ADMIN}; |
| #endif |
| |
| if (ipmi::ccSuccess == |
| ipmiUserSetUserName(ipmiDefaultUserId, |
| reinterpret_cast<const char*>(userName.data()))) |
| { |
| if (ipmi::ccSuccess == |
| ipmiUserSetUserPassword( |
| ipmiDefaultUserId, |
| reinterpret_cast<const char*>(userPassword.data()))) |
| { |
| if (ipmi::ccSuccess == |
| ipmiUserSetPrivilegeAccess( |
| ipmiDefaultUserId, |
| static_cast<uint8_t>(ipmi::EChannelID::chanLan1), |
| privAccess, true)) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "ipmiOEMSetUser2Activation: user created successfully "); |
| return ipmi::responseSuccess(); |
| } |
| } |
| // we need to delete the default user id which added in this command as |
| // password / priv setting is failed. |
| ipmiUserSetUserName(ipmiDefaultUserId, ""); |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetUser2Activation: password / priv setting is failed."); |
| } |
| else |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetUser2Activation: Setting username failed."); |
| } |
| |
| return ipmi::response(ipmi::ccCommandNotAvailable); |
| } |
| |
| /** @brief implementes setting password for special user |
| * @param[in] specialUserIndex |
| * @param[in] userPassword - new password in 20 bytes |
| * @returns ipmi completion code. |
| */ |
| ipmi::RspType<> ipmiOEMSetSpecialUserPassword(ipmi::Context::ptr ctx, |
| uint8_t specialUserIndex, |
| std::vector<uint8_t> userPassword) |
| { |
| ChannelInfo chInfo; |
| try |
| { |
| getChannelInfo(ctx->channel, chInfo); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetSpecialUserPassword: Failed to get Channel Info", |
| phosphor::logging::entry("MSG: %s", e.description())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| if (chInfo.mediumType != |
| static_cast<uint8_t>(EChannelMediumType::systemInterface)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetSpecialUserPassword: Error - supported only in KCS " |
| "interface"); |
| return ipmi::responseCommandNotAvailable(); |
| } |
| if (specialUserIndex != 0) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetSpecialUserPassword: Invalid user account"); |
| return ipmi::responseParmOutOfRange(); |
| } |
| constexpr uint8_t minPasswordSizeRequired = 6; |
| if (userPassword.size() < minPasswordSizeRequired || |
| userPassword.size() > ipmi::maxIpmi20PasswordSize) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| std::string passwd; |
| passwd.assign(reinterpret_cast<const char*>(userPassword.data()), |
| userPassword.size()); |
| return ipmi::response(ipmiSetSpecialUserPassword("root", passwd)); |
| } |
| |
| namespace ledAction |
| { |
| using namespace sdbusplus::xyz::openbmc_project::Led::server; |
| std::map<Physical::Action, uint8_t> actionDbusToIpmi = { |
| {Physical::Action::Off, 0x00}, |
| {Physical::Action::On, 0x10}, |
| {Physical::Action::Blink, 0x01}}; |
| |
| std::map<uint8_t, std::string> offsetObjPath = { |
| {2, statusAmberObjPath}, {4, statusGreenObjPath}, {6, identifyLEDObjPath}}; |
| |
| } // namespace ledAction |
| |
| int8_t getLEDState(sdbusplus::bus::bus& bus, const std::string& intf, |
| const std::string& objPath, uint8_t& state) |
| { |
| try |
| { |
| std::string service = getService(bus, intf, objPath); |
| Value stateValue = |
| getDbusProperty(bus, service, objPath, intf, "State"); |
| std::string strState = std::get<std::string>(stateValue); |
| state = ledAction::actionDbusToIpmi.at( |
| sdbusplus::xyz::openbmc_project::Led::server::Physical:: |
| convertActionFromString(strState)); |
| } |
| catch (sdbusplus::exception::SdBusError& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return -1; |
| } |
| return 0; |
| } |
| |
| ipmi_ret_t ipmiOEMGetLEDStatus(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| uint8_t* resp = reinterpret_cast<uint8_t*>(response); |
| // LED Status |
| //[1:0] = Reserved |
| //[3:2] = Status(Amber) |
| //[5:4] = Status(Green) |
| //[7:6] = System Identify |
| // Status definitions: |
| // 00b = Off |
| // 01b = Blink |
| // 10b = On |
| // 11b = invalid |
| if (*dataLen != 0) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "oem_get_led_status: invalid input len!"); |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| phosphor::logging::log<phosphor::logging::level::DEBUG>("GET led status"); |
| *resp = 0; |
| *dataLen = 0; |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| for (auto it = ledAction::offsetObjPath.begin(); |
| it != ledAction::offsetObjPath.end(); ++it) |
| { |
| uint8_t state = 0; |
| if (-1 == getLEDState(*dbus, ledIntf, it->second, state)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "oem_get_led_status: fail to get ID LED status!"); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| *resp |= state << it->first; |
| } |
| |
| *dataLen = sizeof(*resp); |
| return IPMI_CC_OK; |
| } |
| |
| ipmi_ret_t ipmiOEMCfgHostSerialPortSpeed(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t dataLen, |
| ipmi_context_t context) |
| { |
| CfgHostSerialReq* req = reinterpret_cast<CfgHostSerialReq*>(request); |
| uint8_t* resp = reinterpret_cast<uint8_t*>(response); |
| |
| if (*dataLen == 0) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial: invalid input len!", |
| phosphor::logging::entry("LEN=%d", *dataLen)); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| switch (req->command) |
| { |
| case getHostSerialCfgCmd: |
| { |
| if (*dataLen != 1) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial: invalid input len!"); |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| *dataLen = 0; |
| |
| boost::process::ipstream is; |
| std::vector<std::string> data; |
| std::string line; |
| boost::process::child c1(fwGetEnvCmd, "-n", fwHostSerailCfgEnvName, |
| boost::process::std_out > is); |
| |
| while (c1.running() && std::getline(is, line) && !line.empty()) |
| { |
| data.push_back(line); |
| } |
| |
| c1.wait(); |
| if (c1.exit_code()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial:: error on execute", |
| phosphor::logging::entry("EXECUTE=%s", fwSetEnvCmd)); |
| // Using the default value |
| *resp = 0; |
| } |
| else |
| { |
| if (data.size() != 1) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial:: error on read env"); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| try |
| { |
| unsigned long tmp = std::stoul(data[0]); |
| if (tmp > std::numeric_limits<uint8_t>::max()) |
| { |
| throw std::out_of_range("Out of range"); |
| } |
| *resp = static_cast<uint8_t>(tmp); |
| } |
| catch (const std::invalid_argument& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "invalid config ", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| catch (const std::out_of_range& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "out_of_range config ", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| } |
| |
| *dataLen = 1; |
| break; |
| } |
| case setHostSerialCfgCmd: |
| { |
| if (*dataLen != sizeof(CfgHostSerialReq)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial: invalid input len!"); |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| *dataLen = 0; |
| |
| if (req->parameter > HostSerialCfgParamMax) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial: invalid input!"); |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| boost::process::child c1(fwSetEnvCmd, fwHostSerailCfgEnvName, |
| std::to_string(req->parameter)); |
| |
| c1.wait(); |
| if (c1.exit_code()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial:: error on execute", |
| phosphor::logging::entry("EXECUTE=%s", fwGetEnvCmd)); |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| break; |
| } |
| default: |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "CfgHostSerial: invalid input!"); |
| *dataLen = 0; |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| |
| return IPMI_CC_OK; |
| } |
| |
| constexpr const char* thermalModeInterface = |
| "xyz.openbmc_project.Control.ThermalMode"; |
| constexpr const char* thermalModePath = |
| "/xyz/openbmc_project/control/thermal_mode"; |
| |
| bool getFanProfileInterface( |
| sdbusplus::bus::bus& bus, |
| boost::container::flat_map< |
| std::string, std::variant<std::vector<std::string>, std::string>>& resp) |
| { |
| auto call = bus.new_method_call(settingsBusName, thermalModePath, PROP_INTF, |
| "GetAll"); |
| call.append(thermalModeInterface); |
| try |
| { |
| auto data = bus.call(call); |
| data.read(resp); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "getFanProfileInterface: can't get thermal mode!", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| return false; |
| } |
| return true; |
| } |
| |
| ipmi_ret_t ipmiOEMSetFanConfig(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t dataLen, ipmi_context_t context) |
| { |
| |
| if (*dataLen < 2 || *dataLen > 7) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFanConfig: invalid input len!"); |
| *dataLen = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| // todo: tell bios to only send first 2 bytes |
| |
| SetFanConfigReq* req = reinterpret_cast<SetFanConfigReq*>(request); |
| boost::container::flat_map< |
| std::string, std::variant<std::vector<std::string>, std::string>> |
| profileData; |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| if (!getFanProfileInterface(*dbus, profileData)) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| std::vector<std::string>* supported = |
| std::get_if<std::vector<std::string>>(&profileData["Supported"]); |
| if (supported == nullptr) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| std::string mode; |
| if (req->flags & |
| (1 << static_cast<uint8_t>(setFanProfileFlags::setPerfAcousMode))) |
| { |
| bool performanceMode = |
| (req->flags & (1 << static_cast<uint8_t>( |
| setFanProfileFlags::performAcousSelect))) > 0; |
| |
| if (performanceMode) |
| { |
| |
| if (std::find(supported->begin(), supported->end(), |
| "Performance") != supported->end()) |
| { |
| mode = "Performance"; |
| } |
| } |
| else |
| { |
| |
| if (std::find(supported->begin(), supported->end(), "Acoustic") != |
| supported->end()) |
| { |
| mode = "Acoustic"; |
| } |
| } |
| if (mode.empty()) |
| { |
| return IPMI_CC_INVALID_FIELD_REQUEST; |
| } |
| setDbusProperty(*dbus, settingsBusName, thermalModePath, |
| thermalModeInterface, "Current", mode); |
| } |
| |
| return IPMI_CC_OK; |
| } |
| |
| ipmi::RspType<uint8_t, // profile support map |
| uint8_t, // fan control profile enable |
| uint8_t, // flags |
| uint32_t // dimm presence bit map |
| > |
| ipmiOEMGetFanConfig(uint8_t dimmGroupId) |
| { |
| boost::container::flat_map< |
| std::string, std::variant<std::vector<std::string>, std::string>> |
| profileData; |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| if (!getFanProfileInterface(*dbus, profileData)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| |
| std::string* current = std::get_if<std::string>(&profileData["Current"]); |
| |
| if (current == nullptr) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFanConfig: can't get current mode!"); |
| return ipmi::responseResponseError(); |
| } |
| bool performance = (*current == "Performance"); |
| |
| uint8_t flags = 0; |
| if (performance) |
| { |
| flags |= 1 << 2; |
| } |
| |
| return ipmi::responseSuccess(0, 0, flags, 0); |
| } |
| constexpr const char* cfmLimitSettingPath = |
| "/xyz/openbmc_project/control/cfm_limit"; |
| constexpr const char* cfmLimitIface = "xyz.openbmc_project.Control.CFMLimit"; |
| constexpr const size_t legacyExitAirSensorNumber = 0x2e; |
| constexpr const size_t legacyPCHSensorNumber = 0x22; |
| constexpr const char* exitAirPathName = "Exit_Air"; |
| constexpr const char* pchPathName = "SSB_Temp"; |
| constexpr const char* pidConfigurationIface = |
| "xyz.openbmc_project.Configuration.Pid"; |
| |
| static std::string getConfigPath(const std::string& name) |
| { |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| auto method = |
| dbus->new_method_call("xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree"); |
| |
| method.append("/", 0, std::array<const char*, 1>{pidConfigurationIface}); |
| std::string path; |
| GetSubTreeType resp; |
| try |
| { |
| auto reply = dbus->call(method); |
| reply.read(resp); |
| } |
| catch (sdbusplus::exception_t&) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: mapper error"); |
| }; |
| auto config = |
| std::find_if(resp.begin(), resp.end(), [&name](const auto& pair) { |
| return pair.first.find(name) != std::string::npos; |
| }); |
| if (config != resp.end()) |
| { |
| path = std::move(config->first); |
| } |
| return path; |
| } |
| |
| // flat map to make alphabetical |
| static boost::container::flat_map<std::string, PropertyMap> getPidConfigs() |
| { |
| boost::container::flat_map<std::string, PropertyMap> ret; |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| auto method = |
| dbus->new_method_call("xyz.openbmc_project.ObjectMapper", |
| "/xyz/openbmc_project/object_mapper", |
| "xyz.openbmc_project.ObjectMapper", "GetSubTree"); |
| |
| method.append("/", 0, std::array<const char*, 1>{pidConfigurationIface}); |
| GetSubTreeType resp; |
| |
| try |
| { |
| auto reply = dbus->call(method); |
| reply.read(resp); |
| } |
| catch (sdbusplus::exception_t&) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "getFanConfigPaths: mapper error"); |
| }; |
| for (const auto& [path, objects] : resp) |
| { |
| if (objects.empty()) |
| { |
| continue; // should be impossible |
| } |
| |
| try |
| { |
| ret.emplace(path, |
| getAllDbusProperties(*dbus, objects[0].first, path, |
| pidConfigurationIface)); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "getPidConfigs: can't get DbusProperties!", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| } |
| } |
| return ret; |
| } |
| |
| ipmi::RspType<uint8_t> ipmiOEMGetFanSpeedOffset(void) |
| { |
| boost::container::flat_map<std::string, PropertyMap> data = getPidConfigs(); |
| if (data.empty()) |
| { |
| return ipmi::responseResponseError(); |
| } |
| uint8_t minOffset = std::numeric_limits<uint8_t>::max(); |
| for (const auto& [_, pid] : data) |
| { |
| auto findClass = pid.find("Class"); |
| if (findClass == pid.end()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: found illegal pid " |
| "configurations"); |
| return ipmi::responseResponseError(); |
| } |
| std::string type = std::get<std::string>(findClass->second); |
| if (type == "fan") |
| { |
| auto findOutLimit = pid.find("OutLimitMin"); |
| if (findOutLimit == pid.end()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: found illegal pid " |
| "configurations"); |
| return ipmi::responseResponseError(); |
| } |
| // get the min out of all the offsets |
| minOffset = std::min( |
| minOffset, |
| static_cast<uint8_t>(std::get<double>(findOutLimit->second))); |
| } |
| } |
| if (minOffset == std::numeric_limits<uint8_t>::max()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: found no fan configurations!"); |
| return ipmi::responseResponseError(); |
| } |
| |
| return ipmi::responseSuccess(minOffset); |
| } |
| |
| ipmi::RspType<> ipmiOEMSetFanSpeedOffset(uint8_t offset) |
| { |
| boost::container::flat_map<std::string, PropertyMap> data = getPidConfigs(); |
| if (data.empty()) |
| { |
| |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFanSpeedOffset: found no pid configurations!"); |
| return ipmi::responseResponseError(); |
| } |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| bool found = false; |
| for (const auto& [path, pid] : data) |
| { |
| auto findClass = pid.find("Class"); |
| if (findClass == pid.end()) |
| { |
| |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFanSpeedOffset: found illegal pid " |
| "configurations"); |
| return ipmi::responseResponseError(); |
| } |
| std::string type = std::get<std::string>(findClass->second); |
| if (type == "fan") |
| { |
| auto findOutLimit = pid.find("OutLimitMin"); |
| if (findOutLimit == pid.end()) |
| { |
| |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFanSpeedOffset: found illegal pid " |
| "configurations"); |
| return ipmi::responseResponseError(); |
| } |
| ipmi::setDbusProperty(*dbus, "xyz.openbmc_project.EntityManager", |
| path, pidConfigurationIface, "OutLimitMin", |
| static_cast<double>(offset)); |
| found = true; |
| } |
| } |
| if (!found) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFanSpeedOffset: set no fan offsets"); |
| return ipmi::responseResponseError(); |
| } |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi::RspType<> ipmiOEMSetFscParameter(uint8_t command, uint8_t param1, |
| uint8_t param2) |
| { |
| constexpr const size_t disableLimiting = 0x0; |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| if (command == static_cast<uint8_t>(setFscParamFlags::tcontrol)) |
| { |
| std::string pathName; |
| if (param1 == legacyExitAirSensorNumber) |
| { |
| pathName = exitAirPathName; |
| } |
| else if (param1 == legacyPCHSensorNumber) |
| { |
| pathName = pchPathName; |
| } |
| else |
| { |
| return ipmi::responseParmOutOfRange(); |
| } |
| std::string path = getConfigPath(pathName); |
| ipmi::setDbusProperty(*dbus, "xyz.openbmc_project.EntityManager", path, |
| pidConfigurationIface, "SetPoint", |
| static_cast<double>(param2)); |
| return ipmi::responseSuccess(); |
| } |
| else if (command == static_cast<uint8_t>(setFscParamFlags::cfm)) |
| { |
| uint16_t cfm = param1 | (static_cast<uint16_t>(param2) << 8); |
| |
| // must be greater than 50 based on eps |
| if (cfm < 50 && cfm != disableLimiting) |
| { |
| return ipmi::responseParmOutOfRange(); |
| } |
| |
| try |
| { |
| ipmi::setDbusProperty(*dbus, settingsBusName, cfmLimitSettingPath, |
| cfmLimitIface, "Limit", |
| static_cast<double>(cfm)); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFscParameter: can't set cfm setting!", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| return ipmi::responseResponseError(); |
| } |
| return ipmi::responseSuccess(); |
| } |
| else if (command == static_cast<uint8_t>(setFscParamFlags::maxPwm)) |
| { |
| constexpr const size_t maxDomainCount = 8; |
| uint8_t requestedDomainMask = param1; |
| boost::container::flat_map data = getPidConfigs(); |
| if (data.empty()) |
| { |
| |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFscParameter: found no pid configurations!"); |
| return ipmi::responseResponseError(); |
| } |
| size_t count = 0; |
| for (const auto& [path, pid] : data) |
| { |
| auto findClass = pid.find("Class"); |
| if (findClass == pid.end()) |
| { |
| |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetFscParameter: found illegal pid " |
| "configurations"); |
| return ipmi::responseResponseError(); |
| } |
| std::string type = std::get<std::string>(findClass->second); |
| if (type == "fan") |
| { |
| if (requestedDomainMask & (1 << count)) |
| { |
| ipmi::setDbusProperty( |
| *dbus, "xyz.openbmc_project.EntityManager", path, |
| pidConfigurationIface, "OutLimitMax", |
| static_cast<double>(param2)); |
| } |
| count++; |
| } |
| } |
| return ipmi::responseSuccess(); |
| } |
| else |
| { |
| // todo other command parts possibly |
| // tcontrol is handled in peci now |
| // fan speed offset not implemented yet |
| // domain pwm limit not implemented |
| return ipmi::responseParmOutOfRange(); |
| } |
| } |
| |
| ipmi::RspType< |
| std::variant<uint8_t, std::array<uint8_t, 2>, std::array<uint16_t, 2>>> |
| ipmiOEMGetFscParameter(uint8_t command, std::optional<uint8_t> param) |
| { |
| constexpr uint8_t legacyDefaultSetpoint = -128; |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| if (command == static_cast<uint8_t>(setFscParamFlags::tcontrol)) |
| { |
| if (!param) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| |
| std::string pathName; |
| |
| if (*param == legacyExitAirSensorNumber) |
| { |
| pathName = exitAirPathName; |
| } |
| else if (*param == legacyPCHSensorNumber) |
| { |
| pathName = pchPathName; |
| } |
| else |
| { |
| return ipmi::responseParmOutOfRange(); |
| } |
| |
| uint8_t setpoint = legacyDefaultSetpoint; |
| std::string path = getConfigPath(pathName); |
| if (path.size()) |
| { |
| Value val = ipmi::getDbusProperty( |
| *dbus, "xyz.openbmc_project.EntityManager", path, |
| pidConfigurationIface, "SetPoint"); |
| setpoint = std::floor(std::get<double>(val) + 0.5); |
| } |
| |
| // old implementation used to return the "default" and current, we |
| // don't make the default readily available so just make both the |
| // same |
| |
| return ipmi::responseSuccess( |
| std::array<uint8_t, 2>{setpoint, setpoint}); |
| } |
| else if (command == static_cast<uint8_t>(setFscParamFlags::maxPwm)) |
| { |
| constexpr const size_t maxDomainCount = 8; |
| |
| if (!param) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| uint8_t requestedDomain = *param; |
| if (requestedDomain >= maxDomainCount) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| boost::container::flat_map data = getPidConfigs(); |
| if (data.empty()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: found no pid configurations!"); |
| return ipmi::responseResponseError(); |
| } |
| size_t count = 0; |
| for (const auto& [_, pid] : data) |
| { |
| auto findClass = pid.find("Class"); |
| if (findClass == pid.end()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: found illegal pid " |
| "configurations"); |
| return ipmi::responseResponseError(); |
| } |
| std::string type = std::get<std::string>(findClass->second); |
| if (type == "fan") |
| { |
| if (requestedDomain == count) |
| { |
| auto findOutLimit = pid.find("OutLimitMax"); |
| if (findOutLimit == pid.end()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: found illegal pid " |
| "configurations"); |
| return ipmi::responseResponseError(); |
| } |
| |
| return ipmi::responseSuccess( |
| static_cast<uint8_t>(std::floor( |
| std::get<double>(findOutLimit->second) + 0.5))); |
| } |
| else |
| { |
| count++; |
| } |
| } |
| } |
| |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| else if (command == static_cast<uint8_t>(setFscParamFlags::cfm)) |
| { |
| |
| /* |
| DataLen should be 1, but host is sending us an extra bit. As the |
| previous behavior didn't seem to prevent this, ignore the check for |
| now. |
| |
| if (param) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: invalid input len!"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| */ |
| Value cfmLimit; |
| Value cfmMaximum; |
| try |
| { |
| cfmLimit = ipmi::getDbusProperty(*dbus, settingsBusName, |
| cfmLimitSettingPath, cfmLimitIface, |
| "Limit"); |
| cfmMaximum = ipmi::getDbusProperty( |
| *dbus, "xyz.openbmc_project.ExitAirTempSensor", |
| "/xyz/openbmc_project/control/MaxCFM", cfmLimitIface, "Limit"); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMGetFscParameter: can't get cfm setting!", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| return ipmi::responseResponseError(); |
| } |
| |
| double cfmMax = std::get<double>(cfmMaximum); |
| double cfmLim = std::get<double>(cfmLimit); |
| |
| cfmLim = std::floor(cfmLim + 0.5); |
| cfmMax = std::floor(cfmMax + 0.5); |
| uint16_t cfmLimResp = static_cast<uint16_t>(cfmLim); |
| uint16_t cfmMaxResp = static_cast<uint16_t>(cfmMax); |
| |
| return ipmi::responseSuccess( |
| std::array<uint16_t, 2>{cfmLimResp, cfmMaxResp}); |
| } |
| |
| else |
| { |
| // todo other command parts possibly |
| // domain pwm limit not implemented |
| return ipmi::responseParmOutOfRange(); |
| } |
| } |
| |
| using crConfigVariant = |
| std::variant<bool, uint8_t, uint32_t, std::vector<uint8_t>, std::string>; |
| |
| int setCRConfig(ipmi::Context::ptr ctx, const std::string& property, |
| const crConfigVariant& value, |
| std::chrono::microseconds timeout = ipmi::IPMI_DBUS_TIMEOUT) |
| { |
| boost::system::error_code ec; |
| ctx->bus->yield_method_call<void>( |
| *(ctx->yield), ec, "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/power_supply_redundancy", |
| "org.freedesktop.DBus.Properties", "Set", |
| "xyz.openbmc_project.Control.PowerSupplyRedundancy", property, value); |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to set dbus property to cold redundancy"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int getCRConfig(ipmi::Context::ptr ctx, const std::string& property, |
| crConfigVariant& value, |
| std::chrono::microseconds timeout = ipmi::IPMI_DBUS_TIMEOUT) |
| { |
| boost::system::error_code ec; |
| value = ctx->bus->yield_method_call<crConfigVariant>( |
| *(ctx->yield), ec, "xyz.openbmc_project.Settings", |
| "/xyz/openbmc_project/control/power_supply_redundancy", |
| "org.freedesktop.DBus.Properties", "Get", |
| "xyz.openbmc_project.Control.PowerSupplyRedundancy", property); |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to get dbus property to cold redundancy"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| uint8_t getPSUCount(void) |
| { |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| ipmi::Value num; |
| try |
| { |
| num = ipmi::getDbusProperty( |
| *dbus, "xyz.openbmc_project.PSURedundancy", |
| "/xyz/openbmc_project/control/power_supply_redundancy", |
| "xyz.openbmc_project.Control.PowerSupplyRedundancy", "PSUNumber"); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Failed to get PSUNumber property from dbus interface"); |
| return 0; |
| } |
| uint8_t* pNum = std::get_if<uint8_t>(&num); |
| if (!pNum) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get PSU Number"); |
| return 0; |
| } |
| return *pNum; |
| } |
| |
| bool validateCRAlgo(std::vector<uint8_t>& conf, uint8_t num) |
| { |
| if (conf.size() < num) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid PSU Ranking"); |
| return false; |
| } |
| std::set<uint8_t> confSet; |
| for (uint8_t i = 0; i < num; i++) |
| { |
| if (conf[i] > num) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "PSU Ranking is larger than current PSU number"); |
| return false; |
| } |
| confSet.emplace(conf[i]); |
| } |
| |
| if (confSet.size() != num) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "duplicate PSU Ranking"); |
| return false; |
| } |
| return true; |
| } |
| |
| enum class crParameter |
| { |
| crStatus = 0, |
| crFeature = 1, |
| rotationFeature = 2, |
| rotationAlgo = 3, |
| rotationPeriod = 4, |
| numOfPSU = 5 |
| }; |
| |
| constexpr ipmi::Cc ccParameterNotSupported = 0x80; |
| static const constexpr uint32_t oneDay = 0x15180; |
| static const constexpr uint32_t oneMonth = 0xf53700; |
| static const constexpr uint8_t userSpecific = 0x01; |
| static const constexpr uint8_t crSetCompleted = 0; |
| ipmi::RspType<uint8_t> ipmiOEMSetCRConfig(ipmi::Context::ptr ctx, |
| uint8_t parameter, |
| ipmi::message::Payload& payload) |
| { |
| switch (static_cast<crParameter>(parameter)) |
| { |
| case crParameter::crFeature: |
| { |
| uint8_t param1; |
| if (payload.unpack(param1) || !payload.fullyUnpacked()) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| // ColdRedundancy Enable can only be true or flase |
| if (param1 > 1) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| if (setCRConfig(ctx, "ColdRedundancyEnabled", |
| static_cast<bool>(param1))) |
| { |
| return ipmi::responseResponseError(); |
| } |
| break; |
| } |
| case crParameter::rotationFeature: |
| { |
| uint8_t param1; |
| if (payload.unpack(param1) || !payload.fullyUnpacked()) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| // Rotation Enable can only be true or false |
| if (param1 > 1) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| if (setCRConfig(ctx, "RotationEnabled", static_cast<bool>(param1))) |
| { |
| return ipmi::responseResponseError(); |
| } |
| break; |
| } |
| case crParameter::rotationAlgo: |
| { |
| // Rotation Algorithm can only be 0-BMC Specific or 1-User Specific |
| std::string algoName; |
| uint8_t param1; |
| if (payload.unpack(param1)) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| switch (param1) |
| { |
| case 0: |
| algoName = "xyz.openbmc_project.Control." |
| "PowerSupplyRedundancy.Algo.bmcSpecific"; |
| break; |
| case 1: |
| algoName = "xyz.openbmc_project.Control." |
| "PowerSupplyRedundancy.Algo.userSpecific"; |
| break; |
| default: |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| if (setCRConfig(ctx, "RotationAlgorithm", algoName)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| |
| uint8_t numberOfPSU = getPSUCount(); |
| if (!numberOfPSU) |
| { |
| return ipmi::responseResponseError(); |
| } |
| std::vector<uint8_t> rankOrder; |
| |
| if (param1 == userSpecific) |
| { |
| if (payload.unpack(rankOrder) || !payload.fullyUnpacked()) |
| { |
| ipmi::responseReqDataLenInvalid(); |
| } |
| if (rankOrder.size() < numberOfPSU) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| |
| if (!validateCRAlgo(rankOrder, numberOfPSU)) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| } |
| else |
| { |
| if (rankOrder.size() > 0) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| for (uint8_t i = 1; i <= numberOfPSU; i++) |
| { |
| rankOrder.emplace_back(i); |
| } |
| } |
| if (setCRConfig(ctx, "RotationRankOrder", rankOrder)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| break; |
| } |
| case crParameter::rotationPeriod: |
| { |
| // Minimum Rotation period is One day (86400 seconds) and Max |
| // Rotation Period is 6 month (0xf53700 seconds) |
| uint32_t period; |
| if (payload.unpack(period) || !payload.fullyUnpacked()) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| if ((period < oneDay) || (period > oneMonth)) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| if (setCRConfig(ctx, "PeriodOfRotation", period)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| break; |
| } |
| default: |
| { |
| return ipmi::response(ccParameterNotSupported); |
| } |
| } |
| |
| // TODO Halfwidth needs to set SetInProgress |
| if (setCRConfig(ctx, "ColdRedundancyStatus", |
| std::string("xyz.openbmc_project.Control." |
| "PowerSupplyRedundancy.Status.completed"))) |
| { |
| return ipmi::responseResponseError(); |
| } |
| return ipmi::responseSuccess(crSetCompleted); |
| } |
| |
| ipmi::RspType<std::variant<uint8_t, uint32_t, std::array<uint8_t, 5>>> |
| ipmiOEMGetCRConfig(ipmi::Context::ptr ctx, uint8_t parameter) |
| { |
| crConfigVariant value; |
| switch (static_cast<crParameter>(parameter)) |
| { |
| case crParameter::crStatus: |
| { |
| if (getCRConfig(ctx, "ColdRedundancyStatus", value)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| std::string* pStatus = std::get_if<std::string>(&value); |
| if (!pStatus) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get ColdRedundancyStatus property"); |
| return ipmi::responseResponseError(); |
| } |
| namespace server = sdbusplus::xyz::openbmc_project::Control::server; |
| auto status = |
| server::PowerSupplyRedundancy::convertStatusFromString( |
| *pStatus); |
| switch (status) |
| { |
| case server::PowerSupplyRedundancy::Status::inProgress: |
| return ipmi::responseSuccess(static_cast<uint8_t>(0)); |
| |
| case server::PowerSupplyRedundancy::Status::completed: |
| return ipmi::responseSuccess(static_cast<uint8_t>(1)); |
| default: |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get valid status"); |
| return ipmi::responseResponseError(); |
| } |
| } |
| case crParameter::crFeature: |
| { |
| if (getCRConfig(ctx, "ColdRedundancyEnabled", value)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| bool* pResponse = std::get_if<bool>(&value); |
| if (!pResponse) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get ColdRedundancyEnable property"); |
| return ipmi::responseResponseError(); |
| } |
| |
| return ipmi::responseSuccess(static_cast<uint8_t>(*pResponse)); |
| } |
| case crParameter::rotationFeature: |
| { |
| if (getCRConfig(ctx, "RotationEnabled", value)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| bool* pResponse = std::get_if<bool>(&value); |
| if (!pResponse) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get RotationEnabled property"); |
| return ipmi::responseResponseError(); |
| } |
| return ipmi::responseSuccess(static_cast<uint8_t>(*pResponse)); |
| } |
| case crParameter::rotationAlgo: |
| { |
| if (getCRConfig(ctx, "RotationAlgorithm", value)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| |
| std::string* pAlgo = std::get_if<std::string>(&value); |
| if (!pAlgo) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get RotationAlgorithm property"); |
| return ipmi::responseResponseError(); |
| } |
| std::array<uint8_t, 5> response = {0, 0, 0, 0, 0}; |
| namespace server = sdbusplus::xyz::openbmc_project::Control::server; |
| auto algo = |
| server::PowerSupplyRedundancy::convertAlgoFromString(*pAlgo); |
| switch (algo) |
| { |
| case server::PowerSupplyRedundancy::Algo::bmcSpecific: |
| response[0] = 0; |
| break; |
| case server::PowerSupplyRedundancy::Algo::userSpecific: |
| response[0] = 1; |
| break; |
| default: |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get valid algo"); |
| return ipmi::responseResponseError(); |
| } |
| |
| if (getCRConfig(ctx, "RotationRankOrder", value)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| std::vector<uint8_t>* pResponse = |
| std::get_if<std::vector<uint8_t>>(&value); |
| if (!pResponse) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get RotationRankOrder property"); |
| return ipmi::responseResponseError(); |
| } |
| if (pResponse->size() + 1 > response.size()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Incorrect size of RotationAlgorithm property"); |
| return ipmi::responseResponseError(); |
| } |
| std::copy(pResponse->begin(), pResponse->end(), |
| response.begin() + 1); |
| return ipmi::responseSuccess(response); |
| } |
| case crParameter::rotationPeriod: |
| { |
| if (getCRConfig(ctx, "PeriodOfRotation", value)) |
| { |
| return ipmi::responseResponseError(); |
| } |
| uint32_t* pResponse = std::get_if<uint32_t>(&value); |
| if (!pResponse) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Error to get RotationAlgorithm property"); |
| return ipmi::responseResponseError(); |
| } |
| return ipmi::responseSuccess(*pResponse); |
| } |
| case crParameter::numOfPSU: |
| { |
| uint8_t numberOfPSU = getPSUCount(); |
| if (!numberOfPSU) |
| { |
| return ipmi::responseResponseError(); |
| } |
| return ipmi::responseSuccess(numberOfPSU); |
| } |
| default: |
| { |
| return ipmi::response(ccParameterNotSupported); |
| } |
| } |
| } |
| |
| ipmi::RspType<> ipmiOEMSetFaultIndication(uint8_t sourceId, uint8_t faultType, |
| uint8_t faultState, |
| uint8_t faultGroup, |
| std::array<uint8_t, 8>& ledStateData) |
| { |
| static constexpr const char* objpath = "/xyz/openbmc_project/EntityManager"; |
| static constexpr const char* intf = "xyz.openbmc_project.EntityManager"; |
| constexpr auto maxFaultType = static_cast<size_t>(RemoteFaultType::max); |
| static const std::array<std::string, maxFaultType> faultNames = { |
| "faultFan", "faultTemp", "faultPower", |
| "faultDriveSlot", "faultSoftware", "faultMemory"}; |
| static constexpr const char* sysGpioPath = "/sys/class/gpio/gpio"; |
| static constexpr const char* postfixValue = "/value"; |
| |
| constexpr uint8_t maxFaultSource = 0x4; |
| constexpr uint8_t skipLEDs = 0xFF; |
| constexpr uint8_t pinSize = 64; |
| constexpr uint8_t groupSize = 16; |
| |
| std::vector<uint16_t> ledFaultPins(pinSize, 0xFFFF); |
| uint64_t resFIndex = 0; |
| std::string resFType; |
| std::string service; |
| ObjectValueTree valueTree; |
| |
| // Validate the source, fault type |
| if ((sourceId >= maxFaultSource) || |
| (faultType >= static_cast<int8_t>(RemoteFaultType::max)) || |
| (faultState >= static_cast<int8_t>(RemoteFaultState::maxFaultState)) || |
| (faultGroup >= static_cast<int8_t>(DimmFaultType::maxFaultGroup))) |
| { |
| return ipmi::responseParmOutOfRange(); |
| } |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| try |
| { |
| service = getService(*dbus, intf, objpath); |
| valueTree = getManagedObjects(*dbus, service, "/"); |
| } |
| catch (const std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "No object implements interface", |
| phosphor::logging::entry("SERVICE=%s", service.c_str()), |
| phosphor::logging::entry("INTF=%s", intf)); |
| return ipmi::responseResponseError(); |
| } |
| |
| if (valueTree.empty()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "No object implements interface", |
| phosphor::logging::entry("INTF=%s", intf)); |
| return ipmi::responseResponseError(); |
| } |
| |
| for (const auto& item : valueTree) |
| { |
| // find LedFault configuration |
| auto interface = |
| item.second.find("xyz.openbmc_project.Configuration.LedFault"); |
| if (interface == item.second.end()) |
| { |
| continue; |
| } |
| |
| // find matched fault type: faultMemmory / faultFan |
| // find LedGpioPins/FaultIndex configuration |
| auto propertyFaultType = interface->second.find("FaultType"); |
| auto propertyFIndex = interface->second.find("FaultIndex"); |
| auto ledIndex = interface->second.find("LedGpioPins"); |
| |
| if (propertyFaultType == interface->second.end() || |
| propertyFIndex == interface->second.end() || |
| ledIndex == interface->second.end()) |
| { |
| continue; |
| } |
| |
| try |
| { |
| Value valIndex = propertyFIndex->second; |
| resFIndex = std::get<uint64_t>(valIndex); |
| |
| Value valFType = propertyFaultType->second; |
| resFType = std::get<std::string>(valFType); |
| } |
| catch (const std::bad_variant_access& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return ipmi::responseResponseError(); |
| } |
| // find the matched requested fault type: faultMemmory or faultFan |
| if (resFType != faultNames[faultType]) |
| { |
| continue; |
| } |
| |
| // read LedGpioPins data |
| std::vector<uint64_t> ledgpios; |
| std::variant<std::vector<uint64_t>> message; |
| |
| auto method = dbus->new_method_call( |
| service.c_str(), (std::string(item.first)).c_str(), |
| "org.freedesktop.DBus.Properties", "Get"); |
| |
| method.append("xyz.openbmc_project.Configuration.LedFault", |
| "LedGpioPins"); |
| |
| try |
| { |
| auto reply = dbus->call(method); |
| reply.read(message); |
| ledgpios = std::get<std::vector<uint64_t>>(message); |
| } |
| catch (std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return ipmi::responseResponseError(); |
| } |
| |
| // Check the size to be sure it will never overflow on groupSize |
| if (ledgpios.size() > groupSize) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Fault gpio Pins out of range!"); |
| return ipmi::responseParmOutOfRange(); |
| } |
| // Store data, according to command data bit index order |
| for (int i = 0; i < ledgpios.size(); i++) |
| { |
| ledFaultPins[i + groupSize * resFIndex] = ledgpios[i]; |
| } |
| } |
| |
| switch (RemoteFaultType(faultType)) |
| { |
| case (RemoteFaultType::fan): |
| case (RemoteFaultType::memory): |
| { |
| if (faultGroup == skipLEDs) |
| { |
| return ipmi::responseSuccess(); |
| } |
| |
| uint64_t ledState = 0; |
| // calculate led state bit filed count, each byte has 8bits |
| // the maximum bits will be 8 * 8 bits |
| constexpr uint8_t size = sizeof(ledStateData) * 8; |
| for (int i = 0; i < sizeof(ledStateData); i++) |
| { |
| ledState = (uint64_t)(ledState << 8); |
| ledState = (uint64_t)(ledState | (uint64_t)ledStateData[i]); |
| } |
| |
| std::bitset<size> ledStateBits(ledState); |
| std::string gpioValue; |
| for (int i = 0; i < size; i++) |
| { // skip invalid value |
| if (ledFaultPins[i] == 0xFFFF) |
| { |
| continue; |
| } |
| |
| std::string device = sysGpioPath + |
| std::to_string(ledFaultPins[i]) + |
| postfixValue; |
| std::fstream gpioFile; |
| |
| gpioFile.open(device, std::ios::out); |
| |
| if (!gpioFile.good()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Not Find Led Gpio Device!", |
| phosphor::logging::entry("DEVICE=%s", device.c_str())); |
| return ipmi::responseResponseError(); |
| } |
| gpioFile << std::to_string( |
| static_cast<uint8_t>(ledStateBits[i])); |
| gpioFile.close(); |
| } |
| break; |
| } |
| default: |
| { |
| // now only support two fault types |
| return ipmi::responseParmOutOfRange(); |
| } |
| } |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi::RspType<uint8_t> ipmiOEMReadBoardProductId() |
| { |
| uint8_t prodId = 0; |
| try |
| { |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| const DbusObjectInfo& object = getDbusObject( |
| *dbus, "xyz.openbmc_project.Inventory.Item.Board", |
| "/xyz/openbmc_project/inventory/system/board/", "Baseboard"); |
| const Value& propValue = getDbusProperty( |
| *dbus, object.second, object.first, |
| "xyz.openbmc_project.Inventory.Item.Board", "ProductId"); |
| prodId = static_cast<uint8_t>(std::get<uint64_t>(propValue)); |
| } |
| catch (std::exception& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMReadBoardProductId: Product ID read failed!", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| } |
| return ipmi::responseSuccess(prodId); |
| } |
| |
| /** @brief implements the get security mode command |
| * @param ctx - ctx pointer |
| * |
| * @returns IPMI completion code with following data |
| * - restriction mode value - As specified in |
| * xyz.openbmc_project.Control.Security.RestrictionMode.interface.yaml |
| * - special mode value - As specified in |
| * xyz.openbmc_project.Control.Security.SpecialMode.interface.yaml |
| */ |
| ipmi::RspType<uint8_t, uint8_t> ipmiGetSecurityMode(ipmi::Context::ptr ctx) |
| { |
| namespace securityNameSpace = |
| sdbusplus::xyz::openbmc_project::Control::Security::server; |
| uint8_t restrictionModeValue = 0; |
| uint8_t specialModeValue = 0; |
| |
| boost::system::error_code ec; |
| auto varRestrMode = ctx->bus->yield_method_call<std::variant<std::string>>( |
| *ctx->yield, ec, restricionModeService, restricionModeBasePath, |
| dBusPropertyIntf, dBusPropertyGetMethod, restricionModeIntf, |
| restricionModeProperty); |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiGetSecurityMode: failed to get RestrictionMode property", |
| phosphor::logging::entry("ERROR=%s", ec.message().c_str())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| restrictionModeValue = static_cast<uint8_t>( |
| securityNameSpace::RestrictionMode::convertModesFromString( |
| std::get<std::string>(varRestrMode))); |
| auto varSpecialMode = ctx->bus->yield_method_call<std::variant<uint8_t>>( |
| *ctx->yield, ec, specialModeService, specialModeBasePath, |
| dBusPropertyIntf, dBusPropertyGetMethod, specialModeIntf, |
| specialModeProperty); |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiGetSecurityMode: failed to get SpecialMode property", |
| phosphor::logging::entry("ERROR=%s", ec.message().c_str())); |
| // fall through, let us not worry about SpecialMode property, which is |
| // not required in user scenario |
| } |
| else |
| { |
| specialModeValue = std::get<uint8_t>(varSpecialMode); |
| } |
| return ipmi::responseSuccess(restrictionModeValue, specialModeValue); |
| } |
| |
| /** @brief implements the set security mode command |
| * Command allows to upgrade the restriction mode and won't allow |
| * to downgrade from system interface |
| * @param ctx - ctx pointer |
| * @param restrictionMode - restriction mode value to be set. |
| * |
| * @returns IPMI completion code |
| */ |
| ipmi::RspType<> ipmiSetSecurityMode(ipmi::Context::ptr ctx, |
| uint8_t restrictionMode) |
| { |
| namespace securityNameSpace = |
| sdbusplus::xyz::openbmc_project::Control::Security::server; |
| |
| ChannelInfo chInfo; |
| if (getChannelInfo(ctx->channel, chInfo) != ccSuccess) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiSetSecurityMode: Failed to get Channel Info", |
| phosphor::logging::entry("CHANNEL=%d", ctx->channel)); |
| return ipmi::responseUnspecifiedError(); |
| } |
| auto reqMode = |
| static_cast<securityNameSpace::RestrictionMode::Modes>(restrictionMode); |
| |
| if ((reqMode < securityNameSpace::RestrictionMode::Modes::Provisioning) || |
| (reqMode > |
| securityNameSpace::RestrictionMode::Modes::ProvisionedHostDisabled)) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| boost::system::error_code ec; |
| auto varRestrMode = ctx->bus->yield_method_call<std::variant<std::string>>( |
| *ctx->yield, ec, restricionModeService, restricionModeBasePath, |
| dBusPropertyIntf, dBusPropertyGetMethod, restricionModeIntf, |
| restricionModeProperty); |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiSetSecurityMode: failed to get RestrictionMode property", |
| phosphor::logging::entry("ERROR=%s", ec.message().c_str())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| auto currentRestrictionMode = |
| securityNameSpace::RestrictionMode::convertModesFromString( |
| std::get<std::string>(varRestrMode)); |
| |
| if (chInfo.mediumType != |
| static_cast<uint8_t>(EChannelMediumType::lan8032) && |
| currentRestrictionMode > reqMode) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiSetSecurityMode - Downgrading security mode not supported " |
| "through system interface", |
| phosphor::logging::entry( |
| "CUR_MODE=%d", static_cast<uint8_t>(currentRestrictionMode)), |
| phosphor::logging::entry("REQ_MODE=%d", restrictionMode)); |
| return ipmi::responseCommandNotAvailable(); |
| } |
| |
| ec.clear(); |
| ctx->bus->yield_method_call<>( |
| *ctx->yield, ec, restricionModeService, restricionModeBasePath, |
| dBusPropertyIntf, dBusPropertySetMethod, restricionModeIntf, |
| restricionModeProperty, |
| static_cast<std::variant<std::string>>( |
| securityNameSpace::convertForMessage(reqMode))); |
| |
| if (ec) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiSetSecurityMode: failed to set RestrictionMode property", |
| phosphor::logging::entry("ERROR=%s", ec.message().c_str())); |
| return ipmi::responseUnspecifiedError(); |
| } |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi::RspType<uint8_t /* restore status */> |
| ipmiRestoreConfiguration(const std::array<uint8_t, 3>& clr, uint8_t cmd) |
| { |
| static constexpr std::array<uint8_t, 3> expClr = {'C', 'L', 'R'}; |
| |
| if (clr != expClr) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| constexpr uint8_t cmdStatus = 0; |
| constexpr uint8_t cmdDefaultRestore = 0xaa; |
| constexpr uint8_t cmdFullRestore = 0xbb; |
| constexpr uint8_t cmdFormat = 0xcc; |
| |
| constexpr const char* restoreOpFname = "/tmp/.rwfs/.restore_op"; |
| |
| switch (cmd) |
| { |
| case cmdStatus: |
| break; |
| case cmdDefaultRestore: |
| case cmdFullRestore: |
| case cmdFormat: |
| { |
| // write file to rwfs root |
| int value = (cmd - 1) & 0x03; // map aa, bb, cc => 1, 2, 3 |
| std::ofstream restoreFile(restoreOpFname); |
| if (!restoreFile) |
| { |
| return ipmi::responseUnspecifiedError(); |
| } |
| restoreFile << value << "\n"; |
| break; |
| } |
| default: |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| constexpr uint8_t restorePending = 0; |
| constexpr uint8_t restoreComplete = 1; |
| |
| uint8_t restoreStatus = std::filesystem::exists(restoreOpFname) |
| ? restorePending |
| : restoreComplete; |
| return ipmi::responseSuccess(restoreStatus); |
| } |
| |
| ipmi::RspType<uint8_t> ipmiOEMGetNmiSource(void) |
| { |
| uint8_t bmcSource; |
| namespace nmi = sdbusplus::com::intel::Control::server; |
| |
| try |
| { |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = |
| getService(*dbus, oemNmiSourceIntf, oemNmiSourceObjPath); |
| Value variant = |
| getDbusProperty(*dbus, service, oemNmiSourceObjPath, |
| oemNmiSourceIntf, oemNmiBmcSourceObjPathProp); |
| |
| switch (nmi::NMISource::convertBMCSourceSignalFromString( |
| std::get<std::string>(variant))) |
| { |
| case nmi::NMISource::BMCSourceSignal::None: |
| bmcSource = static_cast<uint8_t>(NmiSource::none); |
| break; |
| case nmi::NMISource::BMCSourceSignal::FpBtn: |
| bmcSource = static_cast<uint8_t>(NmiSource::fpBtn); |
| break; |
| case nmi::NMISource::BMCSourceSignal::WdPreTimeout: |
| bmcSource = static_cast<uint8_t>(NmiSource::wdPreTimeout); |
| break; |
| case nmi::NMISource::BMCSourceSignal::PefMatch: |
| bmcSource = static_cast<uint8_t>(NmiSource::pefMatch); |
| break; |
| case nmi::NMISource::BMCSourceSignal::ChassisCmd: |
| bmcSource = static_cast<uint8_t>(NmiSource::chassisCmd); |
| break; |
| case nmi::NMISource::BMCSourceSignal::MemoryError: |
| bmcSource = static_cast<uint8_t>(NmiSource::memoryError); |
| break; |
| case nmi::NMISource::BMCSourceSignal::PciSerrPerr: |
| bmcSource = static_cast<uint8_t>(NmiSource::pciSerrPerr); |
| break; |
| case nmi::NMISource::BMCSourceSignal::SouthbridgeNmi: |
| bmcSource = static_cast<uint8_t>(NmiSource::southbridgeNmi); |
| break; |
| case nmi::NMISource::BMCSourceSignal::ChipsetNmi: |
| bmcSource = static_cast<uint8_t>(NmiSource::chipsetNmi); |
| break; |
| default: |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "NMI source: invalid property!", |
| phosphor::logging::entry( |
| "PROP=%s", std::get<std::string>(variant).c_str())); |
| return ipmi::responseResponseError(); |
| } |
| } |
| catch (sdbusplus::exception::SdBusError& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return ipmi::responseResponseError(); |
| } |
| |
| return ipmi::responseSuccess(bmcSource); |
| } |
| |
| ipmi::RspType<> ipmiOEMSetNmiSource(uint8_t sourceId) |
| { |
| namespace nmi = sdbusplus::com::intel::Control::server; |
| |
| nmi::NMISource::BMCSourceSignal bmcSourceSignal = |
| nmi::NMISource::BMCSourceSignal::None; |
| |
| switch (NmiSource(sourceId)) |
| { |
| case NmiSource::none: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::None; |
| break; |
| case NmiSource::fpBtn: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::FpBtn; |
| break; |
| case NmiSource::wdPreTimeout: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::WdPreTimeout; |
| break; |
| case NmiSource::pefMatch: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::PefMatch; |
| break; |
| case NmiSource::chassisCmd: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::ChassisCmd; |
| break; |
| case NmiSource::memoryError: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::MemoryError; |
| break; |
| case NmiSource::pciSerrPerr: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::PciSerrPerr; |
| break; |
| case NmiSource::southbridgeNmi: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::SouthbridgeNmi; |
| break; |
| case NmiSource::chipsetNmi: |
| bmcSourceSignal = nmi::NMISource::BMCSourceSignal::ChipsetNmi; |
| break; |
| default: |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "NMI source: invalid property!"); |
| return ipmi::responseResponseError(); |
| } |
| |
| try |
| { |
| // keep NMI signal source |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = |
| getService(*dbus, oemNmiSourceIntf, oemNmiSourceObjPath); |
| setDbusProperty( |
| *dbus, service, oemNmiSourceObjPath, oemNmiSourceIntf, |
| oemNmiBmcSourceObjPathProp, |
| sdbusplus::com::intel::Control::server::convertForMessage( |
| bmcSourceSignal)); |
| // set Enabled property to inform NMI source handling |
| // to trigger a NMI_OUT BSOD. |
| // if it's triggered by NMI source property changed, |
| // NMI_OUT BSOD could be missed if the same source occurs twice in a row |
| if (bmcSourceSignal != nmi::NMISource::BMCSourceSignal::None) |
| { |
| setDbusProperty(*dbus, service, oemNmiSourceObjPath, |
| oemNmiSourceIntf, oemNmiEnabledObjPathProp, |
| static_cast<bool>(true)); |
| } |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return ipmi::responseResponseError(); |
| } |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| namespace dimmOffset |
| { |
| constexpr const char* dimmPower = "DimmPower"; |
| constexpr const char* staticCltt = "StaticCltt"; |
| constexpr const char* offsetPath = "/xyz/openbmc_project/Inventory/Item/Dimm"; |
| constexpr const char* offsetInterface = |
| "xyz.openbmc_project.Inventory.Item.Dimm.Offset"; |
| constexpr const char* property = "DimmOffset"; |
| |
| }; // namespace dimmOffset |
| |
| ipmi::RspType<> |
| ipmiOEMSetDimmOffset(uint8_t type, |
| const std::vector<std::tuple<uint8_t, uint8_t>>& data) |
| { |
| if (type != static_cast<uint8_t>(dimmOffsetTypes::dimmPower) && |
| type != static_cast<uint8_t>(dimmOffsetTypes::staticCltt)) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| if (data.empty()) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| nlohmann::json json; |
| |
| std::ifstream jsonStream(dimmOffsetFile); |
| if (jsonStream.good()) |
| { |
| json = nlohmann::json::parse(jsonStream, nullptr, false); |
| if (json.is_discarded()) |
| { |
| json = nlohmann::json(); |
| } |
| jsonStream.close(); |
| } |
| |
| std::string typeName; |
| if (type == static_cast<uint8_t>(dimmOffsetTypes::dimmPower)) |
| { |
| typeName = dimmOffset::dimmPower; |
| } |
| else |
| { |
| typeName = dimmOffset::staticCltt; |
| } |
| |
| nlohmann::json& field = json[typeName]; |
| |
| for (const auto& [index, value] : data) |
| { |
| field[index] = value; |
| } |
| |
| for (nlohmann::json& val : field) |
| { |
| if (val == nullptr) |
| { |
| val = static_cast<uint8_t>(0); |
| } |
| } |
| |
| std::ofstream output(dimmOffsetFile); |
| if (!output.good()) |
| { |
| std::cerr << "Error writing json file\n"; |
| return ipmi::responseResponseError(); |
| } |
| |
| output << json.dump(4); |
| |
| if (type == static_cast<uint8_t>(dimmOffsetTypes::staticCltt)) |
| { |
| std::shared_ptr<sdbusplus::asio::connection> bus = getSdBus(); |
| |
| std::variant<std::vector<uint8_t>> offsets = |
| field.get<std::vector<uint8_t>>(); |
| auto call = bus->new_method_call( |
| settingsBusName, dimmOffset::offsetPath, PROP_INTF, "Set"); |
| call.append(dimmOffset::offsetInterface, dimmOffset::property, offsets); |
| try |
| { |
| bus->call(call); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "ipmiOEMSetDimmOffset: can't set dimm offsets!", |
| phosphor::logging::entry("ERR=%s", e.what())); |
| return ipmi::responseResponseError(); |
| } |
| } |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| ipmi::RspType<uint8_t> ipmiOEMGetDimmOffset(uint8_t type, uint8_t index) |
| { |
| |
| if (type != static_cast<uint8_t>(dimmOffsetTypes::dimmPower) && |
| type != static_cast<uint8_t>(dimmOffsetTypes::staticCltt)) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| std::ifstream jsonStream(dimmOffsetFile); |
| |
| auto json = nlohmann::json::parse(jsonStream, nullptr, false); |
| if (json.is_discarded()) |
| { |
| std::cerr << "File error in " << dimmOffsetFile << "\n"; |
| return ipmi::responseResponseError(); |
| } |
| |
| std::string typeName; |
| if (type == static_cast<uint8_t>(dimmOffsetTypes::dimmPower)) |
| { |
| typeName = dimmOffset::dimmPower; |
| } |
| else |
| { |
| typeName = dimmOffset::staticCltt; |
| } |
| |
| auto it = json.find(typeName); |
| if (it == json.end()) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| if (it->size() <= index) |
| { |
| return ipmi::responseInvalidFieldRequest(); |
| } |
| |
| uint8_t resp = it->at(index).get<uint8_t>(); |
| return ipmi::responseSuccess(resp); |
| } |
| |
| namespace boot_options |
| { |
| |
| using namespace sdbusplus::xyz::openbmc_project::Control::Boot::server; |
| using IpmiValue = uint8_t; |
| constexpr auto ipmiDefault = 0; |
| |
| std::map<IpmiValue, Source::Sources> sourceIpmiToDbus = { |
| {0x01, Source::Sources::Network}, |
| {0x02, Source::Sources::Disk}, |
| {0x05, Source::Sources::ExternalMedia}, |
| {0x0f, Source::Sources::RemovableMedia}, |
| {ipmiDefault, Source::Sources::Default}}; |
| |
| std::map<IpmiValue, Mode::Modes> modeIpmiToDbus = { |
| {0x03, Mode::Modes::Safe}, |
| {0x06, Mode::Modes::Setup}, |
| {ipmiDefault, Mode::Modes::Regular}}; |
| |
| std::map<Source::Sources, IpmiValue> sourceDbusToIpmi = { |
| {Source::Sources::Network, 0x01}, |
| {Source::Sources::Disk, 0x02}, |
| {Source::Sources::ExternalMedia, 0x05}, |
| {Source::Sources::RemovableMedia, 0x0f}, |
| {Source::Sources::Default, ipmiDefault}}; |
| |
| std::map<Mode::Modes, IpmiValue> modeDbusToIpmi = { |
| {Mode::Modes::Safe, 0x03}, |
| {Mode::Modes::Setup, 0x06}, |
| {Mode::Modes::Regular, ipmiDefault}}; |
| |
| static constexpr auto bootModeIntf = "xyz.openbmc_project.Control.Boot.Mode"; |
| static constexpr auto bootSourceIntf = |
| "xyz.openbmc_project.Control.Boot.Source"; |
| static constexpr auto enabledIntf = "xyz.openbmc_project.Object.Enable"; |
| static constexpr auto persistentObjPath = |
| "/xyz/openbmc_project/control/host0/boot"; |
| static constexpr auto oneTimePath = |
| "/xyz/openbmc_project/control/host0/boot/one_time"; |
| static constexpr auto bootSourceProp = "BootSource"; |
| static constexpr auto bootModeProp = "BootMode"; |
| static constexpr auto oneTimeBootEnableProp = "Enabled"; |
| static constexpr auto httpBootMode = |
| "xyz.openbmc_project.Control.Boot.Source.Sources.Http"; |
| |
| enum class BootOptionParameter : size_t |
| { |
| setInProgress = 0x0, |
| bootFlags = 0x5, |
| }; |
| static constexpr uint8_t setComplete = 0x0; |
| static constexpr uint8_t setInProgress = 0x1; |
| static uint8_t transferStatus = setComplete; |
| static constexpr uint8_t setParmVersion = 0x01; |
| static constexpr uint8_t setParmBootFlagsPermanent = 0x40; |
| static constexpr uint8_t setParmBootFlagsValidOneTime = 0x80; |
| static constexpr uint8_t setParmBootFlagsValidPermanent = 0xC0; |
| static constexpr uint8_t httpBoot = 0xd; |
| static constexpr uint8_t bootSourceMask = 0x3c; |
| |
| } // namespace boot_options |
| |
| ipmi::RspType<uint8_t, // version |
| uint8_t, // param |
| uint8_t, // data0, dependent on parameter |
| std::optional<uint8_t> // data1, dependent on parameter |
| > |
| ipmiOemGetEfiBootOptions(uint8_t parameter, uint8_t set, uint8_t block) |
| { |
| using namespace boot_options; |
| uint8_t bootOption = 0; |
| |
| if (parameter == static_cast<uint8_t>(BootOptionParameter::setInProgress)) |
| { |
| return ipmi::responseSuccess(setParmVersion, parameter, transferStatus, |
| std::nullopt); |
| } |
| |
| if (parameter != static_cast<uint8_t>(BootOptionParameter::bootFlags)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Unsupported parameter"); |
| return ipmi::responseResponseError(); |
| } |
| |
| try |
| { |
| auto oneTimeEnabled = false; |
| // read one time Enabled property |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = getService(*dbus, enabledIntf, oneTimePath); |
| Value variant = getDbusProperty(*dbus, service, oneTimePath, |
| enabledIntf, oneTimeBootEnableProp); |
| oneTimeEnabled = std::get<bool>(variant); |
| |
| // get BootSource and BootMode properties |
| // according to oneTimeEnable |
| auto bootObjPath = oneTimePath; |
| if (oneTimeEnabled == false) |
| { |
| bootObjPath = persistentObjPath; |
| } |
| |
| service = getService(*dbus, bootModeIntf, bootObjPath); |
| variant = getDbusProperty(*dbus, service, bootObjPath, bootModeIntf, |
| bootModeProp); |
| |
| auto bootMode = |
| Mode::convertModesFromString(std::get<std::string>(variant)); |
| |
| service = getService(*dbus, bootSourceIntf, bootObjPath); |
| variant = getDbusProperty(*dbus, service, bootObjPath, bootSourceIntf, |
| bootSourceProp); |
| |
| if (std::get<std::string>(variant) == httpBootMode) |
| { |
| bootOption = httpBoot; |
| } |
| else |
| { |
| auto bootSource = Source::convertSourcesFromString( |
| std::get<std::string>(variant)); |
| bootOption = sourceDbusToIpmi.at(bootSource); |
| if (Source::Sources::Default == bootSource) |
| { |
| bootOption = modeDbusToIpmi.at(bootMode); |
| } |
| } |
| |
| uint8_t oneTime = oneTimeEnabled ? setParmBootFlagsValidOneTime |
| : setParmBootFlagsValidPermanent; |
| bootOption <<= 2; // shift for responseconstexpr |
| return ipmi::responseSuccess(setParmVersion, parameter, oneTime, |
| bootOption); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return ipmi::responseResponseError(); |
| } |
| } |
| |
| ipmi::RspType<> ipmiOemSetEfiBootOptions(uint8_t bootFlag, uint8_t bootParam, |
| std::optional<uint8_t> bootOption) |
| { |
| using namespace boot_options; |
| auto oneTimeEnabled = false; |
| |
| if (bootFlag == static_cast<uint8_t>(BootOptionParameter::setInProgress)) |
| { |
| if (bootOption) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| |
| if (transferStatus == setInProgress) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "boot option set in progress!"); |
| return ipmi::responseResponseError(); |
| } |
| |
| transferStatus = bootParam; |
| return ipmi::responseSuccess(); |
| } |
| |
| if (bootFlag != (uint8_t)BootOptionParameter::bootFlags) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Unsupported parameter"); |
| return ipmi::responseResponseError(); |
| } |
| |
| if (!bootOption) |
| { |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| |
| if (((bootOption.value() & bootSourceMask) >> 2) != |
| httpBoot) // not http boot, exit |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "wrong boot option parameter!"); |
| return ipmi::responseParmOutOfRange(); |
| } |
| |
| try |
| { |
| bool permanent = (bootParam & setParmBootFlagsPermanent) == |
| setParmBootFlagsPermanent; |
| |
| // read one time Enabled property |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| std::string service = getService(*dbus, enabledIntf, oneTimePath); |
| Value variant = getDbusProperty(*dbus, service, oneTimePath, |
| enabledIntf, oneTimeBootEnableProp); |
| oneTimeEnabled = std::get<bool>(variant); |
| |
| /* |
| * Check if the current boot setting is onetime or permanent, if the |
| * request in the command is otherwise, then set the "Enabled" |
| * property in one_time object path to 'True' to indicate onetime |
| * and 'False' to indicate permanent. |
| * |
| * Once the onetime/permanent setting is applied, then the bootMode |
| * and bootSource is updated for the corresponding object. |
| */ |
| if (permanent == oneTimeEnabled) |
| { |
| setDbusProperty(*dbus, service, oneTimePath, enabledIntf, |
| oneTimeBootEnableProp, !permanent); |
| } |
| |
| // set BootSource and BootMode properties |
| // according to oneTimeEnable or persistent |
| auto bootObjPath = oneTimePath; |
| if (oneTimeEnabled == false) |
| { |
| bootObjPath = persistentObjPath; |
| } |
| std::string bootMode = |
| "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular"; |
| std::string bootSource = httpBootMode; |
| |
| service = getService(*dbus, bootModeIntf, bootObjPath); |
| setDbusProperty(*dbus, service, bootObjPath, bootModeIntf, bootModeProp, |
| bootMode); |
| |
| service = getService(*dbus, bootSourceIntf, bootObjPath); |
| setDbusProperty(*dbus, service, bootObjPath, bootSourceIntf, |
| bootSourceProp, bootSource); |
| } |
| catch (sdbusplus::exception_t& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return ipmi::responseResponseError(); |
| } |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| static void registerOEMFunctions(void) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "Registering OEM commands"); |
| ipmiPrintAndRegister(netfnIntcOEMGeneral, IPMI_CMD_WILDCARD, NULL, |
| ipmiOEMWildcard, |
| PRIVILEGE_USER); // wildcard default handler |
| ipmiPrintAndRegister(netfunIntelAppOEM, IPMI_CMD_WILDCARD, NULL, |
| ipmiOEMWildcard, |
| PRIVILEGE_USER); // wildcard default handler |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetChassisIdentifier), |
| NULL, ipmiOEMGetChassisIdentifier, |
| PRIVILEGE_USER); // get chassis identifier |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>(IPMINetfnIntelOEMGeneralCmd::cmdSetSystemGUID), |
| NULL, ipmiOEMSetSystemGUID, |
| PRIVILEGE_ADMIN); // set system guid |
| |
| // <Disable BMC System Reset Action> |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdDisableBMCSystemReset), |
| ipmi::Privilege::Admin, ipmiOEMDisableBMCSystemReset); |
| // <Get BMC Reset Disables> |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetBMCResetDisables), |
| ipmi::Privilege::Admin, ipmiOEMGetBMCResetDisables); |
| |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>(IPMINetfnIntelOEMGeneralCmd::cmdSetBIOSID), |
| NULL, ipmiOEMSetBIOSID, PRIVILEGE_ADMIN); |
| ipmiPrintAndRegister(netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetOEMDeviceInfo), |
| NULL, ipmiOEMGetDeviceInfo, PRIVILEGE_USER); |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetAICSlotFRUIDSlotPosRecords), |
| NULL, ipmiOEMGetAICFRU, PRIVILEGE_USER); |
| |
| ipmi::registerHandler( |
| ipmi::prioOpenBmcBase, ipmi::netFnOemOne, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSendEmbeddedFWUpdStatus), |
| ipmi::Privilege::Operator, ipmiOEMSendEmbeddedFwUpdStatus); |
| |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetPowerRestoreDelay), |
| NULL, ipmiOEMSetPowerRestoreDelay, PRIVILEGE_OPERATOR); |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetPowerRestoreDelay), |
| NULL, ipmiOEMGetPowerRestoreDelay, PRIVILEGE_USER); |
| |
| ipmi::registerHandler( |
| ipmi::prioOpenBmcBase, ipmi::netFnOemOne, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetOEMUser2Activation), |
| ipmi::Privilege::Callback, ipmiOEMSetUser2Activation); |
| |
| ipmi::registerHandler( |
| ipmi::prioOpenBmcBase, ipmi::netFnOemOne, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetSpecialUserPassword), |
| ipmi::Privilege::Callback, ipmiOEMSetSpecialUserPassword); |
| |
| // <Get Processor Error Config> |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetProcessorErrConfig), |
| ipmi::Privilege::User, ipmiOEMGetProcessorErrConfig); |
| // <Set Processor Error Config> |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetProcessorErrConfig), |
| ipmi::Privilege::Admin, ipmiOEMSetProcessorErrConfig); |
| |
| ipmiPrintAndRegister(netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetShutdownPolicy), |
| NULL, ipmiOEMSetShutdownPolicy, PRIVILEGE_ADMIN); |
| ipmiPrintAndRegister(netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetShutdownPolicy), |
| NULL, ipmiOEMGetShutdownPolicy, PRIVILEGE_ADMIN); |
| |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>(IPMINetfnIntelOEMGeneralCmd::cmdSetFanConfig), |
| NULL, ipmiOEMSetFanConfig, PRIVILEGE_USER); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdGetFanConfig), |
| ipmi::Privilege::User, ipmiOEMGetFanConfig); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetFanSpeedOffset), |
| ipmi::Privilege::User, ipmiOEMGetFanSpeedOffset); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetFanSpeedOffset), |
| ipmi::Privilege::User, ipmiOEMSetFanSpeedOffset); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdSetFscParameter), |
| ipmi::Privilege::User, ipmiOEMSetFscParameter); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdGetFscParameter), |
| ipmi::Privilege::User, ipmiOEMGetFscParameter); |
| |
| ipmi::registerHandler( |
| ipmi::prioOpenBmcBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdReadBaseBoardProductId), |
| ipmi::Privilege::Admin, ipmiOEMReadBoardProductId); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdGetNmiStatus), |
| ipmi::Privilege::User, ipmiOEMGetNmiSource); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdSetNmiStatus), |
| ipmi::Privilege::Operator, ipmiOEMSetNmiSource); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetEfiBootOptions), |
| ipmi::Privilege::User, ipmiOemGetEfiBootOptions); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetEfiBootOptions), |
| ipmi::Privilege::Operator, ipmiOemSetEfiBootOptions); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdGetSecurityMode), |
| Privilege::User, ipmiGetSecurityMode); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdSetSecurityMode), |
| Privilege::Admin, ipmiSetSecurityMode); |
| |
| ipmiPrintAndRegister( |
| netfnIntcOEMGeneral, |
| static_cast<ipmi_cmd_t>(IPMINetfnIntelOEMGeneralCmd::cmdGetLEDStatus), |
| NULL, ipmiOEMGetLEDStatus, PRIVILEGE_ADMIN); |
| ipmiPrintAndRegister( |
| netfnIntcOEMPlatform, |
| static_cast<ipmi_cmd_t>( |
| IPMINetfnIntelOEMPlatformCmd::cmdCfgHostSerialPortSpeed), |
| NULL, ipmiOEMCfgHostSerialPortSpeed, PRIVILEGE_ADMIN); |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetFaultIndication), |
| ipmi::Privilege::Operator, ipmiOEMSetFaultIndication); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdSetColdRedundancyConfig), |
| ipmi::Privilege::User, ipmiOEMSetCRConfig); |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>( |
| IPMINetfnIntelOEMGeneralCmd::cmdGetColdRedundancyConfig), |
| ipmi::Privilege::User, ipmiOEMGetCRConfig); |
| |
| registerHandler(prioOemBase, netfn::intel::oemGeneral, |
| netfn::intel::cmdRestoreConfiguration, Privilege::Admin, |
| ipmiRestoreConfiguration); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdSetDimmOffset), |
| ipmi::Privilege::Operator, ipmiOEMSetDimmOffset); |
| |
| ipmi::registerHandler( |
| ipmi::prioOemBase, netfnIntcOEMGeneral, |
| static_cast<ipmi::Cmd>(IPMINetfnIntelOEMGeneralCmd::cmdGetDimmOffset), |
| ipmi::Privilege::Operator, ipmiOEMGetDimmOffset); |
| } |
| |
| } // namespace ipmi |