blob: a382716ac68391f7a693548a00d76ef9cb77a4fb [file] [log] [blame]
/*
// Copyright (c) 2018 Intel Corporation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
*/
#pragma once
#include <ipmid/api-types.hpp>
#include <user_channel/user_layer.hpp>
namespace ipmi
{
namespace intel
{
static constexpr NetFn netFnGeneral = netFnOemOne;
static constexpr NetFn netFnPlatform = netFnOemTwo;
static constexpr NetFn netFnApp = netFnOemEight;
namespace general
{
static constexpr Cmd cmdRestoreConfiguration = 0x02;
static constexpr Cmd cmdGetSmSignal = 0x14;
static constexpr Cmd cmdSetSmSignal = 0x15;
static constexpr Cmd cmdSetBIOSID = 0x26;
static constexpr Cmd cmdGetOEMDeviceInfo = 0x27;
static constexpr Cmd cmdSetColdRedundancyConfig = 0x2d;
static constexpr Cmd cmdGetColdRedundancyConfig = 0x2e;
static constexpr Cmd cmdGetAICSlotFRUIDSlotPosRecords = 0x31;
static constexpr Cmd cmdGetMultiNodeRole = 0x33;
static constexpr Cmd cmdGetMultiNodeId = 0x36;
static constexpr Cmd cmdSetSystemGUID = 0x41;
static constexpr Cmd cmdDisableBMCSystemReset = 0x42;
static constexpr Cmd cmdGetBMCResetDisables = 0x43;
static constexpr Cmd cmdSendEmbeddedFWUpdStatus = 0x44;
static constexpr Cmd cmdSlotI2CMasterWriteRead = 0x52;
static constexpr Cmd cmdSetPowerRestoreDelay = 0x54;
static constexpr Cmd cmdGetPowerRestoreDelay = 0x55;
static constexpr Cmd cmdSetFaultIndication = 0x57;
static constexpr Cmd cmdSetOEMUser2Activation = 0x5A;
static constexpr Cmd cmdSetSpecialUserPassword = 0x5F;
static constexpr Cmd cmdSetShutdownPolicy = 0x60;
static constexpr Cmd cmdGetShutdownPolicy = 0x62;
static constexpr Cmd cmdGetMultiNodePresence = 0x63;
static constexpr Cmd cmdSetFanConfig = 0x89;
static constexpr Cmd cmdGetFanConfig = 0x8a;
static constexpr Cmd cmdSetFanSpeedOffset = 0x8c;
static constexpr Cmd cmdGetFanSpeedOffset = 0x8d;
static constexpr Cmd cmdSetDimmOffset = 0x8e;
static constexpr Cmd cmdGetDimmOffset = 0x8f;
static constexpr Cmd cmdSetFscParameter = 0x90;
static constexpr Cmd cmdGetFscParameter = 0x91;
static constexpr Cmd cmdGetChassisIdentifier = 0x92;
static constexpr Cmd cmdReadBaseBoardProductId = 0x93;
static constexpr Cmd cmdGetProcessorErrConfig = 0x9A;
static constexpr Cmd cmdSetProcessorErrConfig = 0x9B;
static constexpr Cmd cmdSetManufacturingData = 0xA1;
static constexpr Cmd cmdGetManufacturingData = 0xA2;
static constexpr Cmd cmdGetLEDStatus = 0xB0;
static constexpr Cmd cmdControlBmcServices = 0xB1;
static constexpr Cmd cmdGetBmcServiceStatus = 0xB2;
static constexpr Cmd cmdGetSecurityMode = 0xB3;
static constexpr Cmd cmdSetSecurityMode = 0xB4;
static constexpr Cmd cmdMtmKeepAlive = 0xB5;
static constexpr Cmd cmdGetNmiStatus = 0xE5;
static constexpr Cmd cmdSetEfiBootOptions = 0xEA;
static constexpr Cmd cmdGetEfiBootOptions = 0xEB;
static constexpr Cmd cmdSetNmiStatus = 0xED;
static constexpr Cmd cmdGetPSUVersion = 0xEF;
} // namespace general
namespace platform
{
static constexpr Cmd cmdCfgHostSerialPortSpeed = 0x90;
static constexpr Cmd cmdClearCMOS = 0x91;
} // namespace platform
namespace app
{
static constexpr Cmd cmdMdrStatus = 0x20;
static constexpr Cmd cmdMdrComplete = 0x21;
static constexpr Cmd cmdMdrEvent = 0x22;
static constexpr Cmd cmdMdrRead = 0x23;
static constexpr Cmd cmdMdrWrite = 0x24;
static constexpr Cmd cmdMdrLock = 0x25;
static constexpr Cmd cmdMdrIIAgentStatus = 0x30;
static constexpr Cmd cmdMdrIIGetDir = 0x31;
static constexpr Cmd cmdMdrIIGetDataInfo = 0x32;
static constexpr Cmd cmdMdrIILockData = 0x33;
static constexpr Cmd cmdMdrIIUnlockData = 0X34;
static constexpr Cmd cmdMdrIIGetDataBlock = 0x35;
static constexpr Cmd cmdMdrIISendDir = 0x38;
static constexpr Cmd cmdMdrIISendDataInfoOffer = 0x39;
static constexpr Cmd cmdMdrIISendDataInfo = 0x3a;
static constexpr Cmd cmdMdrIIDataStart = 0x3b;
static constexpr Cmd cmdMdrIIDataDone = 0x3c;
static constexpr Cmd cmdMdrIISendDataBlock = 0x3d;
} // namespace app
} // namespace intel
} // namespace ipmi
// FIXME: put these in the cpp files that use them
enum class IPMIIntelOEMReturnCodes
{
ipmiCCPayloadActive = 0x80,
ipmiCCInvalidPCIESlotID = 0x80,
ipmiCCParameterNotSupported = 0x80,
ipmiCCPayloadAlreadyDeactivated = 0x80,
ipmiCCSetInProcess = 0x81,
ipmiCCPayloadDisable = 0x81,
ipmiCCLostArbitration = 0x81,
ipmiCCInvalidCablePortIndex = 0x81,
ipmiCCHealthStatusNotAvailable = 0x81,
ipmiCCBusError = 0x82,
ipmiCCReadOnly = 0x82,
ipmiCCWriteOnly = 0x82,
ipmiCCNoCablePresent = 0x82,
ipmiCCDataCollectionInProgress = 0x82,
ipmiCCPayloadActivationLimitReached = 0x82,
ipmiCCNACKOnWrite = 0x83,
ipmiCCDataCollectionFailed = 0x83,
ipmiCCCanNotActivateWithEncrption = 0x83,
ipmiCCCanNotActivateWithoutEncryption = 0x84,
ipmiCCInvalidChecksum = 0x85,
ipmiCCNoCabledPCIEPortsAvailable = 0xC2,
};
enum class IPMIReturnCodeExt
{
ipmiCCInvalidLUN = 0xC2,
ipmiCCTimeout = 0xC3,
ipmiCCStorageLeak = 0xC4,
ipmiCCRequestDataTruncated = 0xC6,
ipmiCCRequestDataFieldLengthLimitExceeded = 0xC8,
ipmiCCCanNotReturnNumberOfRequestedDataBytes = 0xCA,
ipmiCCRequestSensorDataRecordNotFound = 0xCB,
ipmiCCDestinationUnavailable = 0xD3,
ipmiCCParamterNotSupportInPresentState = 0xD5,
};
static constexpr const uint8_t maxBIOSIDLength = 0xFF;
static constexpr const uint8_t maxCPUNum = 4;
static constexpr const char* biosObjPath = "/xyz/openbmc_project/bios";
static constexpr const char* biosIntf =
"xyz.openbmc_project.Inventory.Item.Bios";
static constexpr const char* biosProp = "BiosId";
static constexpr const char* powerRestoreDelayObjPath =
"/xyz/openbmc_project/control/power_restore_delay";
static constexpr const char* powerRestoreDelayIntf =
"xyz.openbmc_project.Control.Power.RestoreDelay";
static constexpr const char* powerRestoreDelayProp = "PowerRestoreDelay";
static constexpr const char* processorErrConfigObjPath =
"/xyz/openbmc_project/control/processor_error_config";
static constexpr const char* processorErrConfigIntf =
"xyz.openbmc_project.Control.Processor.ErrConfig";
static constexpr const char* bmcResetDisablesPath =
"/xyz/openbmc_project/control/bmc_reset_disables";
static constexpr const char* bmcResetDisablesIntf =
"xyz.openbmc_project.Control.ResetDisables";
static constexpr const char* postCodesObjPath =
"/xyz/openbmc_project/State/Boot/PostCode";
static constexpr const char* postCodesIntf =
"xyz.openbmc_project.State.Boot.PostCode";
static constexpr const char* identifyLEDObjPath =
"/xyz/openbmc_project/led/physical/identify";
static constexpr const char* ledIntf = "xyz.openbmc_project.Led.Physical";
static constexpr const char* statusAmberObjPath =
"/xyz/openbmc_project/led/physical/status_amber";
static constexpr const char* statusGreenObjPath =
"/xyz/openbmc_project/led/physical/status_green";
static constexpr const uint8_t noShutdownOnOCOT = 0;
static constexpr const uint8_t shutdownOnOCOT = 1;
static constexpr const uint8_t noShutdownPolicySupported = 0;
static constexpr const uint8_t shutdownPolicySupported = 1;
static constexpr const char* oemShutdownPolicyIntf =
"com.intel.Control.OCOTShutdownPolicy";
static constexpr const char* oemShutdownPolicyObjPath =
"/com/intel/control/ocotshutdown_policy_config";
static constexpr const char* oemShutdownPolicyObjPathProp = "OCOTPolicy";
static constexpr const char* fwGetEnvCmd = "/sbin/fw_printenv";
static constexpr const char* fwSetEnvCmd = "/sbin/fw_setenv";
static constexpr const char* fwHostSerailCfgEnvName = "hostserialcfg";
constexpr const char* settingsBusName = "xyz.openbmc_project.Settings";
static constexpr const uint8_t getHostSerialCfgCmd = 0;
static constexpr const uint8_t setHostSerialCfgCmd = 1;
// parameters:
// 0: host serial port 1 and 2 normal speed
// 1: host serial port 1 high spend, port 2 normal speed
// 2: host serial port 1 normal spend, port 2 high speed
// 3: host serial port 1 and 2 high speed
static constexpr const uint8_t HostSerialCfgParamMax = 3;
static constexpr uint8_t ipmiDefaultUserId = 2;
static constexpr const uint8_t selEvtTargetMask = 0xF0;
static constexpr const uint8_t selEvtTargetShift = 4;
static constexpr const uint8_t targetInstanceMask = 0x0E;
static constexpr const uint8_t targetInstanceShift = 1;
enum class IPMINetfnIntelOEMAppCmd
{
mdrStatus = 0x20,
mdrComplete = 0x21,
mdrEvent = 0x22,
mdrRead = 0x23,
mdrWrite = 0x24,
mdrLock = 0x25,
mdr2AgentStatus = 0x30,
mdr2GetDir = 0x31,
mdr2GetDataInfo = 0x32,
mdr2LockData = 0x33,
mdr2UnlockData = 0x34,
mdr2GetDataBlock = 0x35,
mdr2SendDir = 0x38,
mdr2SendDataInfoOffer = 0x39,
mdr2SendDataInfo = 0x3a,
mdr2DataStart = 0x3b,
mdr2DataDone = 0x3c,
mdr2SendDataBlock = 0x3d,
};
enum class OEMDevEntityType
{
biosId,
devVer,
sdrVer,
};
enum class FWUpdateTarget : uint8_t
{
targetBMC = 0x0,
targetBIOS = 0x1,
targetME = 0x2,
targetOEMEWS = 0x4,
};
enum class CPUStatus
{
disabled = 0x0,
enabled = 0x1,
notPresent = 0x3,
};
#pragma pack(push, 1)
struct GUIDData
{
uint8_t node1;
uint8_t node2;
uint8_t node3;
uint8_t node4;
uint8_t node5;
uint8_t node6;
uint8_t clock1;
uint8_t clock2;
uint8_t timeHigh1;
uint8_t timeHigh2;
uint8_t timeMid1;
uint8_t timeMid2;
uint8_t timeLow1;
uint8_t timeLow2;
uint8_t timeLow3;
uint8_t timeLow4;
};
struct DeviceInfo
{
uint8_t biosIDLength;
uint8_t biosId[maxBIOSIDLength];
};
struct SetPowerRestoreDelayReq
{
uint8_t byteMSB;
uint8_t byteLSB;
};
struct GetPowerRestoreDelayRes
{
uint8_t byteMSB;
uint8_t byteLSB;
};
struct GetOemDeviceInfoRes
{
uint8_t resDatalen;
uint8_t data[maxBIOSIDLength];
};
struct GetOEMShutdownPolicyRes
{
uint8_t policy;
uint8_t policySupport;
};
struct CfgHostSerialReq
{
uint8_t command;
uint8_t parameter;
};
#pragma pack(pop)
//
// Fault type enumeration
//
enum class RemoteFaultType
{
fan, // 0
temperature, // 1
power, // 2
driveslot, // 3
software, // 4
memory, // 5
max = 6 // 6
};
// Enumeration for remote fault states as required by the HSC
//
enum class RemoteFaultState
{
// fault indicators
fanLEDs,
cpu1DimmLeds,
cpu2DimmLeds,
cpu3DimmLeds,
cpu4DimmLeds,
maxFaultState,
};
enum class DimmFaultType
{
cpu1cpu2Dimm,
cpu3cpu4Dimm,
maxFaultGroup,
};
enum class setFscParamFlags : uint8_t
{
tcontrol = 0x1,
pwmOffset = 0x2,
maxPwm = 0x3,
cfm = 0x4
};
enum class dimmOffsetTypes : uint8_t
{
staticCltt = 0x0,
dimmPower = 0x2
};
// FIXME: this stuff needs to be rewritten
enum IPMI_INTEL_OEM_RETURN_CODES
{
IPMI_CC_OEM_PAYLOAD_ACTIVE = 0x80,
IPMI_CC_OEM_INVALID_PCIE_SLOTID = 0x80,
IPMI_CC_OEM_PARAMETER_NOT_SUPPORTED = 0x80,
IPMI_CC_OEM_PAYLOAD_ALREADY_DEACTIVATED = 0x80,
IPMI_CC_OEM_SET_IN_PROCESS = 0x81,
IPMI_CC_OEM_PAYLOAD_DISABLE = 0x81,
IPMI_CC_OEM_LOST_ARBITRATION = 0x81,
IPMI_CC_OEM_INVALID_CABLE_PORT_INDEX = 0x81,
IPMI_CC_OEM_HEALTH_STATUS_NOT_AVAILABLE = 0x81,
IPMI_CC_OEM_BUS_ERROR = 0x82,
IPMI_CC_OEM_READ_ONLY = 0x82,
IPMI_CC_OEM_WRITE_ONLY = 0x82,
IPMI_CC_OEM_NO_CABLE_PRESENT = 0x82,
IPMI_CC_OEM_DATA_COLLECTION_IN_PROGRESS = 0x82,
IPMI_CC_OEM_PAYLOAD_ACTIVATION_LIMIT_REACH = 0x82,
IPMI_CC_OEM_NACK_ON_WRITE = 0x83,
IPMI_CC_OEM_DATA_COLLECTION_FAILED = 0x83,
IPMI_CC_OEM_CAN_NOT_ACTIVATE_WITH_ENCRYPTION = 0x83,
IPMI_CC_OEM_CAN_NOT_ACTIVATE_WITHOUT_ENCRYPTION = 0x84,
IPMI_CC_OEM_INVALID_CHECKSUM = 0x85,
IPMI_CC_OEM_NO_CABLED_PCIE_PORTS_AVAILABLE = 0xC2,
};
enum IPMI_RETURN_CODE_EXT
{
IPMI_CC_INVALID_LUN = 0xC2,
IPMI_CC_STORGE_LEAK = 0xC4,
IPMI_CC_REQUEST_DATA_TRUNCATED = 0xC6,
IPMI_CC_REQUEST_DATA_FIELD_LENGTH_LIMIT_EXCEEDED = 0xC8,
IPMI_CC_CANNOT_RETURN_NUMBER_OF_REQUESTED_DATA_BYTES = 0xCA,
IPMI_CC_REQUEST_SENSOR_DATA_RECORD_NOT_FOUND = 0xCB,
IPMI_CC_DESTINATION_UNAVAILABLE = 0xD3,
IPMI_CC_PARAMETER_NOT_SUPPORT_IN_PRESENT_STATE = 0xD5,
};