| /* |
| // Copyright (c) 2019 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #include <boost/algorithm/string/join.hpp> |
| #include <me_to_redfish_hooks.hpp> |
| #include <phosphor-logging/log.hpp> |
| |
| #include <string_view> |
| |
| namespace intel_oem::ipmi::sel::redfish_hooks::me |
| { |
| namespace health_event |
| { |
| namespace smbus_failure |
| { |
| |
| static bool messageHook(const SELData& selData, std::string& eventId, |
| std::vector<std::string>& args) |
| { |
| static const boost::container::flat_map<uint8_t, std::string> smlink = { |
| {0x01, "SmLink0/0B"}, |
| {0x02, "SmLink1"}, |
| {0x03, "SmLink2"}, |
| {0x04, "SmLink3"}, |
| {0x05, "SmLink4"}}; |
| |
| const auto errorDetails = selData.eventData3; |
| const auto faultySmlink = smlink.find(selData.eventData2); |
| if (faultySmlink == smlink.end()) |
| { |
| return false; |
| } |
| |
| eventId = "MeSmbusLinkFailure"; |
| |
| args.push_back(faultySmlink->second); |
| args.push_back(utils::toHex(errorDetails)); |
| |
| return true; |
| } |
| } // namespace smbus_failure |
| |
| namespace fw_status |
| { |
| static const boost::container::flat_map<uint8_t, std::string> |
| manufacturingError = { |
| {0x00, "Generic error"}, |
| {0x01, "Wrong or missing VSCC table"}, |
| {0x02, "Wrong sensor scanning period in PIA"}, |
| {0x03, "Wrong device definition in PIA"}, |
| {0x04, "Reserved (Wrong SMART/CLST configuration)"}, |
| {0x05, "Intel ME FW configuration is inconsistent or out of range"}, |
| {0x06, "Reserved"}, |
| {0x07, "Intel ME FW configuration is corrupted"}, |
| {0x08, "SMLink0/0B misconfiguration"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> peciOverDmiError = |
| {{0x01, "DRAM Init Done HECI message not received by Intel ME before EOP"}, |
| {0x02, "System PCIe bus configuration not known or not valid on DID HECI " |
| "message arrival to Intel ME"}, |
| {0x03, "PECI over DMI run-time failure"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| mctpInterfaceError = { |
| {0x01, "No DID HECI message received before EOP"}, |
| {0x02, "No MCTP_SET_BUS_OWNER HECI message received by Intel ME on EOP " |
| "arrival " |
| "to ME while MCTP stack is configured in Bus Owner Proxy mode"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| unsupportedFeature = {{0x00, "Other Segment Defined Feature"}, |
| {0x01, "Fast NM limiting"}, |
| {0x02, "Volumetric Airflow and Outlet Temperature"}, |
| {0x03, "CUPS"}, |
| {0x04, "Thermal policies and Inlet Temperature"}, |
| {0x05, "Platform limiting with MICs"}, |
| {0x07, "Shared power supplies"}, |
| {0x08, "MIC Proxy"}, |
| {0x09, "Reset warning"}, |
| {0x0A, "PMBus Proxy"}, |
| {0x0B, "Always on"}, |
| {0x0C, "IPMI Intel ME FW update"}, |
| {0x0D, "MCTP bus owner"}, |
| {0x0E, "MCTP bus owner proxy"}, |
| {0x0F, "Dual BIOS"}, |
| {0x10, "Battery less"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> umaError = { |
| {0x00, "UMA Read integrity error. Checksum of data read from UMA differs " |
| "from expected one."}, |
| {0x01, "UMA Read/Write timeout. Timeout occurred during copying data " |
| "from/to UMA."}, |
| {0x02, |
| "UMA not granted. BIOS did not grant any UMA or DRAM INIT done message " |
| "was not received from BIOS before EOP. Intel ME FW goes to recovery."}, |
| {0x03, "UMA size granted by BIOS differs from requested. ME FW goes to " |
| "recovery."}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> pttHealthEvent = { |
| {0x00, "Intel PTT disabled (PTT region is not present)."}, |
| {0x01, "Intel PTT downgrade (PTT data should be not available)."}, |
| {0x02, "Intel PTT disabled (battery less configuration)."}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| bootGuardHealthEvent = { |
| {0x00, "Boot Guard flow error (possible reasons: verification timeout; " |
| "verification error; BIOS Protection error)."}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> restrictedMode = { |
| {0x01, "Firmware entered restricted mode – UMA is not available. " |
| "Restricted features set."}, |
| {0x02, "Firmware exited restricted mode."}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| multiPchModeMisconfig = { |
| {0x01, "BIOS did not set reset synchronization in multiPCH mode"}, |
| {0x02, |
| "PMC indicates different non/legacy mode for the PCH than BMC set " |
| "on the GPIO"}, |
| {0x03, |
| "Misconfiguration MPCH support enabled due to BTG support enabled"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| flashVerificationError = { |
| {0x00, "OEM Public Key verification error"}, |
| {0x01, "Flash Descriptor Region Manifest verification error"}, |
| {0x02, "Soft Straps verification error"}}; |
| |
| namespace autoconfiguration |
| { |
| |
| bool messageHook(const SELData& selData, std::string& eventId, |
| std::vector<std::string>& args) |
| { |
| static const boost::container::flat_map<uint8_t, std::string> dcSource = { |
| {0b00, "BMC"}, {0b01, "PSU"}, {0b10, "On-board power sensor"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| chassisSource = {{0b00, "BMC"}, |
| {0b01, "PSU"}, |
| {0b10, "On-board power sensor"}, |
| {0b11, "Not supported"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| efficiencySource = { |
| {0b00, "BMC"}, {0b01, "PSU"}, {0b11, "Not supported"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| unmanagedSource = {{0b00, "BMC"}, {0b01, "Estimated"}}; |
| |
| static const boost::container::flat_map<uint8_t, std::string> |
| failureReason = {{0b00, "BMC discovery failure"}, |
| {0b01, "Insufficient factory configuration"}, |
| {0b10, "Unknown sensor type"}, |
| {0b11, "Other error encountered"}}; |
| |
| auto succeeded = selData.eventData3 >> 7 & 0b1; |
| if (succeeded) |
| { |
| eventId = "MeAutoConfigSuccess"; |
| |
| auto dc = dcSource.find(selData.eventData3 >> 5 & 0b11); |
| auto chassis = chassisSource.find(selData.eventData3 >> 3 & 0b11); |
| auto efficiency = efficiencySource.find(selData.eventData3 >> 1 & 0b11); |
| auto unmanaged = unmanagedSource.find(selData.eventData3 & 0b1); |
| if (dc == dcSource.end() || chassis == chassisSource.end() || |
| efficiency == efficiencySource.end() || |
| unmanaged == unmanagedSource.end()) |
| { |
| return false; |
| } |
| |
| args.push_back(dc->second); |
| args.push_back(chassis->second); |
| args.push_back(efficiency->second); |
| args.push_back(unmanaged->second); |
| } |
| else |
| { |
| eventId = "MeAutoConfigFailed"; |
| |
| const auto it = failureReason.find(selData.eventData3 >> 5 & 0b11); |
| if (it == failureReason.end()) |
| { |
| return false; |
| } |
| |
| args.push_back(it->second); |
| } |
| |
| return true; |
| } |
| } // namespace autoconfiguration |
| |
| namespace factory_reset |
| { |
| bool messageHook(const SELData& selData, std::string& eventId, |
| std::vector<std::string>& args) |
| { |
| static const boost::container::flat_map<uint8_t, std::string> |
| restoreToFactoryPreset = { |
| {0x00, |
| "Flash file system error detected. Automatic restore to factory " |
| "presets has been triggered."}, |
| {0x01, "Automatic restore to factory presets has been completed."}, |
| {0x02, |
| "Restore to factory presets triggered by “Force ME Recovery” " |
| "IPMI command has been completed."}, |
| {0x03, |
| "Restore to factory presets triggered by AC power cycle with " |
| "Recovery jumper asserted has been completed."}}; |
| |
| auto param = restoreToFactoryPreset.find(selData.eventData3); |
| if (param == restoreToFactoryPreset.end()) |
| { |
| return false; |
| } |
| |
| if (selData.eventData3 == 0x00) |
| { |
| eventId = "MeFactoryResetError"; |
| } |
| else |
| { |
| eventId = "MeFactoryRestore"; |
| } |
| |
| args.push_back(param->second); |
| return true; |
| } |
| } // namespace factory_reset |
| |
| namespace flash_state |
| { |
| bool messageHook(const SELData& selData, std::string& eventId, |
| std::vector<std::string>& args) |
| { |
| static const boost::container::flat_map<uint8_t, std::string> |
| flashStateInformation = { |
| {0x00, |
| "Flash partition table, recovery image or factory presets image " |
| "corrupted"}, |
| {0x01, "Flash erase limit has been reached"}, |
| {0x02, |
| "Flash write limit has been reached. Writing to flash has been " |
| "disabled"}, |
| {0x03, "Writing to the flash has been enabled"}}; |
| |
| auto param = flashStateInformation.find(selData.eventData3); |
| if (param == flashStateInformation.end()) |
| { |
| return false; |
| } |
| |
| if (selData.eventData3 == 0x03) |
| { |
| eventId = "MeFlashStateInformationWritingEnabled"; |
| } |
| else |
| { |
| eventId = "MeFlashStateInformation"; |
| } |
| |
| args.push_back(param->second); |
| return true; |
| } |
| } // namespace flash_state |
| |
| static bool messageHook(const SELData& selData, std::string& eventId, |
| std::vector<std::string>& args) |
| { |
| static const boost::container::flat_map< |
| uint8_t, |
| std::pair<std::string, std::optional<std::variant<utils::ParserFunc, |
| utils::MessageMap>>>> |
| eventMap = { |
| {0x00, {"MeRecoveryGpioForced", {}}}, |
| {0x01, {"MeImageExecutionFailed", {}}}, |
| {0x02, {"MeFlashEraseError", {}}}, |
| {0x03, {{}, flash_state::messageHook}}, |
| {0x04, {"MeInternalError", {}}}, |
| {0x05, {"MeExceptionDuringShutdown", {}}}, |
| {0x06, {"MeDirectFlashUpdateRequested", {}}}, |
| {0x07, {"MeManufacturingError", manufacturingError}}, |
| {0x08, {{}, factory_reset::messageHook}}, |
| {0x09, {"MeFirmwareException", utils::logByteHex<2>}}, |
| {0x0A, {"MeFlashWearOutWarning", utils::logByteDec<2>}}, |
| {0x0D, {"MePeciOverDmiError", peciOverDmiError}}, |
| {0x0E, {"MeMctpInterfaceError", mctpInterfaceError}}, |
| {0x0F, {{}, autoconfiguration::messageHook}}, |
| {0x10, {"MeUnsupportedFeature", unsupportedFeature}}, |
| {0x12, {"MeCpuDebugCapabilityDisabled", {}}}, |
| {0x13, {"MeUmaError", umaError}}, |
| {0x16, {"MePttHealthEvent", pttHealthEvent}}, |
| {0x17, {"MeBootGuardHealthEvent", bootGuardHealthEvent}}, |
| {0x18, {"MeRestrictedMode", restrictedMode}}, |
| {0x19, {"MeMultiPchModeMisconfig", multiPchModeMisconfig}}, |
| {0x1A, {"MeFlashVerificationError", flashVerificationError}}}; |
| |
| return utils::genericMessageHook(eventMap, selData, eventId, args); |
| } |
| } // namespace fw_status |
| |
| static bool messageHook(const SELData& selData, std::string& eventId, |
| std::vector<std::string>& args) |
| { |
| const HealthEventType healthEventType = |
| static_cast<HealthEventType>(selData.offset); |
| |
| switch (healthEventType) |
| { |
| case HealthEventType::FirmwareStatus: |
| return fw_status::messageHook(selData, eventId, args); |
| break; |
| |
| case HealthEventType::SmbusLinkFailure: |
| return smbus_failure::messageHook(selData, eventId, args); |
| break; |
| } |
| |
| return false; |
| } |
| } // namespace health_event |
| |
| /** |
| * @brief Main entry point for parsing ME IPMI Platform Events |
| * |
| * @brief selData - IPMI Platform Event structure |
| * @brief ipmiRaw - the same event in raw binary form |
| * |
| * @returns true if event was successfully parsed and consumed |
| */ |
| bool messageHook(const SELData& selData, const std::string& ipmiRaw) |
| { |
| const EventSensor meSensor = static_cast<EventSensor>(selData.sensorNum); |
| std::string eventId; |
| std::vector<std::string> args; |
| |
| switch (meSensor) |
| { |
| case EventSensor::MeFirmwareHealth: |
| if (health_event::messageHook(selData, eventId, args)) |
| { |
| utils::storeRedfishEvent(ipmiRaw, eventId, args); |
| return true; |
| } |
| break; |
| } |
| |
| return defaultMessageHook(ipmiRaw); |
| } |
| } // namespace intel_oem::ipmi::sel::redfish_hooks::me |