include/oemcommands.hpp

/*
// Copyright (c) 2018 Intel Corporation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
*/

#pragma once

#include <ipmid/api-types.hpp>
#include <user_channel/user_layer.hpp>
namespace ipmi
{
namespace intel
{

static constexpr NetFn netFnGeneral = netFnOemOne;
static constexpr NetFn netFnPlatform = netFnOemTwo;
static constexpr NetFn netFnApp = netFnOemEight;

namespace general
{
static constexpr Cmd cmdRestoreConfiguration = 0x02;
static constexpr Cmd cmdGetSmSignal = 0x14;
static constexpr Cmd cmdSetSmSignal = 0x15;
static constexpr Cmd cmdSetBIOSID = 0x26;
static constexpr Cmd cmdGetOEMDeviceInfo = 0x27;
static constexpr Cmd cmdSetColdRedundancyConfig = 0x2d;
static constexpr Cmd cmdGetColdRedundancyConfig = 0x2e;
static constexpr Cmd cmdGetAICSlotFRUIDSlotPosRecords = 0x31;
static constexpr Cmd cmdGetMultiNodeRole = 0x33;
static constexpr Cmd cmdGetMultiNodeId = 0x36;
static constexpr Cmd cmdSetSystemGUID = 0x41;
static constexpr Cmd cmdDisableBMCSystemReset = 0x42;
static constexpr Cmd cmdGetBMCResetDisables = 0x43;
static constexpr Cmd cmdSendEmbeddedFWUpdStatus = 0x44;
static constexpr Cmd cmdSlotI2CMasterWriteRead = 0x52;
static constexpr Cmd cmdSetPowerRestoreDelay = 0x54;
static constexpr Cmd cmdGetPowerRestoreDelay = 0x55;
static constexpr Cmd cmdSetFaultIndication = 0x57;
static constexpr Cmd cmdSetOEMUser2Activation = 0x5A;
static constexpr Cmd cmdSetSpecialUserPassword = 0x5F;
static constexpr Cmd cmdSetShutdownPolicy = 0x60;
static constexpr Cmd cmdGetShutdownPolicy = 0x62;
static constexpr Cmd cmdGetMultiNodePresence = 0x63;
static constexpr Cmd cmdGetBufferSize = 0x66;
static constexpr Cmd cmdSetFanConfig = 0x89;
static constexpr Cmd cmdGetFanConfig = 0x8a;
static constexpr Cmd cmdSetFanSpeedOffset = 0x8c;
static constexpr Cmd cmdGetFanSpeedOffset = 0x8d;
static constexpr Cmd cmdSetDimmOffset = 0x8e;
static constexpr Cmd cmdGetDimmOffset = 0x8f;
static constexpr Cmd cmdSetFscParameter = 0x90;
static constexpr Cmd cmdGetFscParameter = 0x91;
static constexpr Cmd cmdGetChassisIdentifier = 0x92;
static constexpr Cmd cmdReadBaseBoardProductId = 0x93;
static constexpr Cmd cmdGetProcessorErrConfig = 0x9A;
static constexpr Cmd cmdSetProcessorErrConfig = 0x9B;
static constexpr Cmd cmdSetManufacturingData = 0xA1;
static constexpr Cmd cmdGetManufacturingData = 0xA2;
static constexpr Cmd cmdGetLEDStatus = 0xB0;
static constexpr Cmd cmdControlBmcServices = 0xB1;
static constexpr Cmd cmdGetBmcServiceStatus = 0xB2;
static constexpr Cmd cmdGetSecurityMode = 0xB3;
static constexpr Cmd cmdSetSecurityMode = 0xB4;
static constexpr Cmd cmdMtmKeepAlive = 0xB5;
static constexpr Cmd cmdOEMGetReading = 0xE2;
static constexpr Cmd cmdSetBIOSCap = 0xD3;
static constexpr Cmd cmdGetBIOSCap = 0xD4;
static constexpr Cmd cmdSetPayload = 0xD5;
static constexpr Cmd cmdGetPayload = 0xD6;
static constexpr Cmd cmdSetBIOSPwdHashInfo = 0xD7;
static constexpr Cmd cmdGetBIOSPwdHash = 0xD8;
static constexpr Cmd cmdGetNmiStatus = 0xE5;
static constexpr Cmd cmdSetEfiBootOptions = 0xEA;
static constexpr Cmd cmdGetEfiBootOptions = 0xEB;
static constexpr Cmd cmdSetNmiStatus = 0xED;
static constexpr Cmd cmdGetPSUVersion = 0xEF;
} // namespace general

namespace platform
{
static constexpr Cmd cmdCfgHostSerialPortSpeed = 0x90;
static constexpr Cmd cmdClearCMOS = 0x91;
} // namespace platform

namespace app
{
static constexpr Cmd cmdMdrStatus = 0x20;
static constexpr Cmd cmdMdrComplete = 0x21;
static constexpr Cmd cmdMdrEvent = 0x22;
static constexpr Cmd cmdMdrRead = 0x23;
static constexpr Cmd cmdMdrWrite = 0x24;
static constexpr Cmd cmdMdrLock = 0x25;
static constexpr Cmd cmdMdrIIAgentStatus = 0x30;
static constexpr Cmd cmdMdrIIGetDir = 0x31;
static constexpr Cmd cmdMdrIIGetDataInfo = 0x32;
static constexpr Cmd cmdMdrIILockData = 0x33;
static constexpr Cmd cmdMdrIIUnlockData = 0X34;
static constexpr Cmd cmdMdrIIGetDataBlock = 0x35;
static constexpr Cmd cmdMdrIISendDir = 0x38;
static constexpr Cmd cmdMdrIISendDataInfoOffer = 0x39;
static constexpr Cmd cmdMdrIISendDataInfo = 0x3a;
static constexpr Cmd cmdMdrIIDataStart = 0x3b;
static constexpr Cmd cmdMdrIIDataDone = 0x3c;
static constexpr Cmd cmdMdrIISendDataBlock = 0x3d;
static constexpr Cmd cmdSlotIpmb = 0x51;
} // namespace app

} // namespace intel

} // namespace ipmi

// FIXME: put these in the cpp files that use them
enum class IPMIIntelOEMReturnCodes
{
    ipmiCCPayloadActive = 0x80,
    ipmiCCInvalidPCIESlotID = 0x80,
    ipmiCCParameterNotSupported = 0x80,
    ipmiCCPayloadAlreadyDeactivated = 0x80,
    ipmiCCSetInProcess = 0x81,
    ipmiCCPayloadDisable = 0x81,
    ipmiCCLostArbitration = 0x81,
    ipmiCCInvalidCablePortIndex = 0x81,
    ipmiCCHealthStatusNotAvailable = 0x81,
    ipmiCCBusError = 0x82,
    ipmiCCReadOnly = 0x82,
    ipmiCCWriteOnly = 0x82,
    ipmiCCNoCablePresent = 0x82,
    ipmiCCDataCollectionInProgress = 0x82,
    ipmiCCPayloadActivationLimitReached = 0x82,
    ipmiCCNACKOnWrite = 0x83,
    ipmiCCDataCollectionFailed = 0x83,
    ipmiCCCanNotActivateWithEncrption = 0x83,
    ipmiCCCanNotActivateWithoutEncryption = 0x84,
    ipmiCCInvalidChecksum = 0x85,
    ipmiCCNoCabledPCIEPortsAvailable = 0xC2,

};

enum class IPMIReturnCodeExt
{
    ipmiCCInvalidLUN = 0xC2,
    ipmiCCTimeout = 0xC3,
    ipmiCCStorageLeak = 0xC4,
    ipmiCCRequestDataTruncated = 0xC6,
    ipmiCCRequestDataFieldLengthLimitExceeded = 0xC8,
    ipmiCCCanNotReturnNumberOfRequestedDataBytes = 0xCA,
    ipmiCCRequestSensorDataRecordNotFound = 0xCB,
    ipmiCCDestinationUnavailable = 0xD3,
    ipmiCCParamterNotSupportInPresentState = 0xD5,
};

static constexpr const uint8_t maxBIOSIDLength = 0xFF;
static constexpr const uint8_t maxCPUNum = 4;
static constexpr const char* biosActiveObjPath =
    "/xyz/openbmc_project/software/bios_active";
static constexpr const char* biosVersionIntf =
    "xyz.openbmc_project.Software.Version";
static constexpr const char* biosVersionProp = "Version";

static constexpr const char* powerRestoreDelayObjPath =
    "/xyz/openbmc_project/control/power_restore_delay";
static constexpr const char* powerRestoreDelayIntf =
    "xyz.openbmc_project.Control.Power.RestoreDelay";
static constexpr const char* powerRestoreDelayProp = "PowerRestoreDelay";
static constexpr const char* processorErrConfigObjPath =
    "/xyz/openbmc_project/control/processor_error_config";
static constexpr const char* processorErrConfigIntf =
    "xyz.openbmc_project.Control.Processor.ErrConfig";
static constexpr const char* bmcResetDisablesPath =
    "/xyz/openbmc_project/control/bmc_reset_disables";
static constexpr const char* bmcResetDisablesIntf =
    "xyz.openbmc_project.Control.ResetDisables";

static constexpr const char* postCodesObjPath =
    "/xyz/openbmc_project/State/Boot/PostCode";
static constexpr const char* postCodesIntf =
    "xyz.openbmc_project.State.Boot.PostCode";

static constexpr const char* identifyLEDObjPath =
    "/xyz/openbmc_project/led/physical/identify";
static constexpr const char* ledIntf = "xyz.openbmc_project.Led.Physical";
static constexpr const char* statusAmberObjPath =
    "/xyz/openbmc_project/led/physical/status_amber";
static constexpr const char* statusGreenObjPath =
    "/xyz/openbmc_project/led/physical/status_green";

static constexpr const uint8_t noShutdownOnOCOT = 0;
static constexpr const uint8_t shutdownOnOCOT = 1;
static constexpr const uint8_t noShutdownPolicySupported = 0;
static constexpr const uint8_t shutdownPolicySupported = 1;
static constexpr const char* oemShutdownPolicyIntf =
    "com.intel.Control.OCOTShutdownPolicy";
static constexpr const char* oemShutdownPolicyObjPath =
    "/com/intel/control/ocotshutdown_policy_config";
static constexpr const char* oemShutdownPolicyObjPathProp = "OCOTPolicy";

static constexpr const char* fwGetEnvCmd = "/sbin/fw_printenv";
static constexpr const char* fwSetEnvCmd = "/sbin/fw_setenv";
static constexpr const char* fwHostSerailCfgEnvName = "hostserialcfg";

constexpr const char* settingsBusName = "xyz.openbmc_project.Settings";

static constexpr const uint8_t getHostSerialCfgCmd = 0;
static constexpr const uint8_t setHostSerialCfgCmd = 1;

// parameters:
// 0: host serial port 1 and 2 normal speed
// 1: host serial port 1 high spend, port 2 normal speed
// 2: host serial port 1 normal spend, port 2 high speed
// 3: host serial port 1 and 2 high speed
static constexpr const uint8_t HostSerialCfgParamMax = 3;
static constexpr uint8_t ipmiDefaultUserId = 2;

static constexpr const uint8_t selEvtTargetMask = 0xF0;
static constexpr const uint8_t selEvtTargetShift = 4;

static constexpr const uint8_t targetInstanceMask = 0x0E;
static constexpr const uint8_t targetInstanceShift = 1;

enum class IPMINetfnIntelOEMAppCmd
{
    mdrStatus = 0x20,
    mdrComplete = 0x21,
    mdrEvent = 0x22,
    mdrRead = 0x23,
    mdrWrite = 0x24,
    mdrLock = 0x25,
    mdr2AgentStatus = 0x30,
    mdr2GetDir = 0x31,
    mdr2GetDataInfo = 0x32,
    mdr2LockData = 0x33,
    mdr2UnlockData = 0x34,
    mdr2GetDataBlock = 0x35,
    mdr2SendDir = 0x38,
    mdr2SendDataInfoOffer = 0x39,
    mdr2SendDataInfo = 0x3a,
    mdr2DataStart = 0x3b,
    mdr2DataDone = 0x3c,
    mdr2SendDataBlock = 0x3d,
};

enum class OEMDevEntityType
{
    biosId,
    devVer,
    sdrVer,
};

enum class FWUpdateTarget : uint8_t
{
    targetBMC = 0x0,
    targetBIOS = 0x1,
    targetME = 0x2,
    targetOEMEWS = 0x4,
};

enum class CPUStatus
{
    disabled = 0x0,
    enabled = 0x1,
    notPresent = 0x3,
};

#pragma pack(push, 1)
struct GUIDData
{
    uint8_t node1;
    uint8_t node2;
    uint8_t node3;
    uint8_t node4;
    uint8_t node5;
    uint8_t node6;
    uint8_t clock1;
    uint8_t clock2;
    uint8_t timeHigh1;
    uint8_t timeHigh2;
    uint8_t timeMid1;
    uint8_t timeMid2;
    uint8_t timeLow1;
    uint8_t timeLow2;
    uint8_t timeLow3;
    uint8_t timeLow4;
};

struct DeviceInfo
{
    uint8_t biosIDLength;
    uint8_t biosId[maxBIOSIDLength];
};

struct SetPowerRestoreDelayReq
{
    uint8_t byteMSB;
    uint8_t byteLSB;
};

struct GetPowerRestoreDelayRes
{
    uint8_t byteMSB;
    uint8_t byteLSB;
};

struct GetOemDeviceInfoRes
{
    uint8_t resDatalen;
    uint8_t data[maxBIOSIDLength];
};

struct GetOEMShutdownPolicyRes
{
    uint8_t policy;
    uint8_t policySupport;
};

struct CfgHostSerialReq
{
    uint8_t command;
    uint8_t parameter;
};
#pragma pack(pop)

//
// Fault type enumeration
//
enum class RemoteFaultType
{
    fan,         // 0
    temperature, // 1
    power,       // 2
    driveslot,   // 3
    software,    // 4
    memory,      // 5
    max = 6      // 6
};

// Enumeration for remote fault states as required by the HSC
//
enum class RemoteFaultState
{
    // fault indicators
    fanLEDs,
    cpu1DimmLeds,
    cpu2DimmLeds,
    cpu3DimmLeds,
    cpu4DimmLeds,
    maxFaultState,
};

enum class DimmFaultType
{
    cpu1cpu2Dimm,
    cpu3cpu4Dimm,
    maxFaultGroup,
};

enum class setFscParamFlags : uint8_t
{
    tcontrol = 0x1,
    pwmOffset = 0x2,
    maxPwm = 0x3,
    cfm = 0x4
};

enum class dimmOffsetTypes : uint8_t
{
    staticCltt = 0x0,
    dimmPower = 0x2
};

// FIXME: this stuff needs to be rewritten
enum IPMI_INTEL_OEM_RETURN_CODES
{
    IPMI_CC_OEM_PAYLOAD_ACTIVE = 0x80,
    IPMI_CC_OEM_INVALID_PCIE_SLOTID = 0x80,
    IPMI_CC_OEM_PARAMETER_NOT_SUPPORTED = 0x80,
    IPMI_CC_OEM_PAYLOAD_ALREADY_DEACTIVATED = 0x80,
    IPMI_CC_OEM_SET_IN_PROCESS = 0x81,
    IPMI_CC_OEM_PAYLOAD_DISABLE = 0x81,
    IPMI_CC_OEM_LOST_ARBITRATION = 0x81,
    IPMI_CC_OEM_INVALID_CABLE_PORT_INDEX = 0x81,
    IPMI_CC_OEM_HEALTH_STATUS_NOT_AVAILABLE = 0x81,
    IPMI_CC_OEM_BUS_ERROR = 0x82,
    IPMI_CC_OEM_READ_ONLY = 0x82,
    IPMI_CC_OEM_WRITE_ONLY = 0x82,
    IPMI_CC_OEM_NO_CABLE_PRESENT = 0x82,
    IPMI_CC_OEM_DATA_COLLECTION_IN_PROGRESS = 0x82,
    IPMI_CC_OEM_PAYLOAD_ACTIVATION_LIMIT_REACH = 0x82,
    IPMI_CC_OEM_NACK_ON_WRITE = 0x83,
    IPMI_CC_OEM_DATA_COLLECTION_FAILED = 0x83,
    IPMI_CC_OEM_CAN_NOT_ACTIVATE_WITH_ENCRYPTION = 0x83,
    IPMI_CC_OEM_CAN_NOT_ACTIVATE_WITHOUT_ENCRYPTION = 0x84,
    IPMI_CC_OEM_INVALID_CHECKSUM = 0x85,
    IPMI_CC_OEM_NO_CABLED_PCIE_PORTS_AVAILABLE = 0xC2,
};

enum IPMI_RETURN_CODE_EXT
{
    IPMI_CC_INVALID_LUN = 0xC2,
    IPMI_CC_STORGE_LEAK = 0xC4,
    IPMI_CC_REQUEST_DATA_TRUNCATED = 0xC6,
    IPMI_CC_REQUEST_DATA_FIELD_LENGTH_LIMIT_EXCEEDED = 0xC8,
    IPMI_CC_CANNOT_RETURN_NUMBER_OF_REQUESTED_DATA_BYTES = 0xCA,
    IPMI_CC_REQUEST_SENSOR_DATA_RECORD_NOT_FOUND = 0xCB,
    IPMI_CC_DESTINATION_UNAVAILABLE = 0xD3,
    IPMI_CC_PARAMETER_NOT_SUPPORT_IN_PRESENT_STATE = 0xD5,
};