| /* SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later */ |
| |
| #if HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| #if HAVE_ENDIAN_H |
| #include <endian.h> |
| #endif |
| |
| #include <assert.h> |
| #include <err.h> |
| #include <errno.h> |
| #include <inttypes.h> |
| #include <stdbool.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #define pr_fmt(x) "astlpc: " x |
| |
| #include "container_of.h" |
| #include "crc32.h" |
| #include "libmctp.h" |
| #include "libmctp-alloc.h" |
| #include "libmctp-log.h" |
| #include "libmctp-astlpc.h" |
| #include "range.h" |
| |
| #ifdef MCTP_HAVE_FILEIO |
| |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <sys/ioctl.h> |
| #include <sys/mman.h> |
| #include <linux/aspeed-lpc-ctrl.h> |
| |
| /* kernel interface */ |
| static const char *kcs_path = "/dev/mctp0"; |
| static const char *lpc_path = "/dev/aspeed-lpc-ctrl"; |
| |
| #endif |
| |
| struct mctp_astlpc_buffer { |
| uint32_t offset; |
| uint32_t size; |
| }; |
| |
| struct mctp_astlpc_layout { |
| struct mctp_astlpc_buffer rx; |
| struct mctp_astlpc_buffer tx; |
| }; |
| |
| struct mctp_astlpc_protocol { |
| uint16_t version; |
| uint32_t (*packet_size)(uint32_t body); |
| uint32_t (*body_size)(uint32_t packet); |
| void (*pktbuf_protect)(struct mctp_pktbuf *pkt); |
| bool (*pktbuf_validate)(struct mctp_pktbuf *pkt); |
| }; |
| |
| struct mctp_binding_astlpc { |
| struct mctp_binding binding; |
| |
| void *lpc_map; |
| struct mctp_astlpc_layout layout; |
| |
| uint8_t mode; |
| uint32_t requested_mtu; |
| |
| const struct mctp_astlpc_protocol *proto; |
| |
| /* direct ops data */ |
| struct mctp_binding_astlpc_ops ops; |
| void *ops_data; |
| |
| /* fileio ops data */ |
| int kcs_fd; |
| uint8_t kcs_status; |
| |
| bool running; |
| }; |
| |
| #define binding_to_astlpc(b) \ |
| container_of(b, struct mctp_binding_astlpc, binding) |
| |
| #define astlpc_prlog(ctx, lvl, fmt, ...) \ |
| do { \ |
| bool __bmc = ((ctx)->mode == MCTP_BINDING_ASTLPC_MODE_BMC); \ |
| mctp_prlog(lvl, pr_fmt("%s: " fmt), __bmc ? "bmc" : "host", \ |
| ##__VA_ARGS__); \ |
| } while (0) |
| |
| #define astlpc_prerr(ctx, fmt, ...) \ |
| astlpc_prlog(ctx, MCTP_LOG_ERR, fmt, ##__VA_ARGS__) |
| #define astlpc_prwarn(ctx, fmt, ...) \ |
| astlpc_prlog(ctx, MCTP_LOG_WARNING, fmt, ##__VA_ARGS__) |
| #define astlpc_prinfo(ctx, fmt, ...) \ |
| astlpc_prlog(ctx, MCTP_LOG_INFO, fmt, ##__VA_ARGS__) |
| #define astlpc_prdebug(ctx, fmt, ...) \ |
| astlpc_prlog(ctx, MCTP_LOG_DEBUG, fmt, ##__VA_ARGS__) |
| |
| /* clang-format off */ |
| #define ASTLPC_MCTP_MAGIC 0x4d435450 |
| #define ASTLPC_VER_BAD 0 |
| #define ASTLPC_VER_MIN 1 |
| |
| /* Support testing of new binding protocols */ |
| #ifndef ASTLPC_VER_CUR |
| #define ASTLPC_VER_CUR 3 |
| #endif |
| /* clang-format on */ |
| |
| #ifndef ARRAY_SIZE |
| #define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0])) |
| #endif |
| |
| static uint32_t astlpc_packet_size_v1(uint32_t body) |
| { |
| assert((body + 4) > body); |
| |
| return body + 4; |
| } |
| |
| static uint32_t astlpc_body_size_v1(uint32_t packet) |
| { |
| assert((packet - 4) < packet); |
| |
| return packet - 4; |
| } |
| |
| void astlpc_pktbuf_protect_v1(struct mctp_pktbuf *pkt) |
| { |
| (void)pkt; |
| } |
| |
| bool astlpc_pktbuf_validate_v1(struct mctp_pktbuf *pkt) |
| { |
| (void)pkt; |
| return true; |
| } |
| |
| static uint32_t astlpc_packet_size_v3(uint32_t body) |
| { |
| assert((body + 4 + 4) > body); |
| |
| return body + 4 + 4; |
| } |
| |
| static uint32_t astlpc_body_size_v3(uint32_t packet) |
| { |
| assert((packet - 4 - 4) < packet); |
| |
| return packet - 4 - 4; |
| } |
| |
| void astlpc_pktbuf_protect_v3(struct mctp_pktbuf *pkt) |
| { |
| uint32_t code; |
| |
| code = htobe32(crc32(mctp_pktbuf_hdr(pkt), mctp_pktbuf_size(pkt))); |
| mctp_prdebug("%s: 0x%" PRIx32, __func__, code); |
| mctp_pktbuf_push(pkt, &code, 4); |
| } |
| |
| bool astlpc_pktbuf_validate_v3(struct mctp_pktbuf *pkt) |
| { |
| uint32_t code; |
| void *check; |
| |
| code = be32toh(crc32(mctp_pktbuf_hdr(pkt), mctp_pktbuf_size(pkt) - 4)); |
| mctp_prdebug("%s: 0x%" PRIx32, __func__, code); |
| check = mctp_pktbuf_pop(pkt, 4); |
| return check && !memcmp(&code, check, 4); |
| } |
| |
| static const struct mctp_astlpc_protocol astlpc_protocol_version[] = { |
| [0] = { |
| .version = 0, |
| .packet_size = NULL, |
| .body_size = NULL, |
| .pktbuf_protect = NULL, |
| .pktbuf_validate = NULL, |
| }, |
| [1] = { |
| .version = 1, |
| .packet_size = astlpc_packet_size_v1, |
| .body_size = astlpc_body_size_v1, |
| .pktbuf_protect = astlpc_pktbuf_protect_v1, |
| .pktbuf_validate = astlpc_pktbuf_validate_v1, |
| }, |
| [2] = { |
| .version = 2, |
| .packet_size = astlpc_packet_size_v1, |
| .body_size = astlpc_body_size_v1, |
| .pktbuf_protect = astlpc_pktbuf_protect_v1, |
| .pktbuf_validate = astlpc_pktbuf_validate_v1, |
| }, |
| [3] = { |
| .version = 3, |
| .packet_size = astlpc_packet_size_v3, |
| .body_size = astlpc_body_size_v3, |
| .pktbuf_protect = astlpc_pktbuf_protect_v3, |
| .pktbuf_validate = astlpc_pktbuf_validate_v3, |
| }, |
| }; |
| |
| struct mctp_lpcmap_hdr { |
| uint32_t magic; |
| |
| uint16_t bmc_ver_min; |
| uint16_t bmc_ver_cur; |
| uint16_t host_ver_min; |
| uint16_t host_ver_cur; |
| uint16_t negotiated_ver; |
| uint16_t pad0; |
| |
| struct { |
| uint32_t rx_offset; |
| uint32_t rx_size; |
| uint32_t tx_offset; |
| uint32_t tx_size; |
| } layout; |
| } __attribute__((packed)); |
| |
| static const uint32_t control_size = 0x100; |
| |
| #define LPC_WIN_SIZE (1 * 1024 * 1024) |
| |
| #define KCS_STATUS_BMC_READY 0x80 |
| #define KCS_STATUS_CHANNEL_ACTIVE 0x40 |
| #define KCS_STATUS_IBF 0x02 |
| #define KCS_STATUS_OBF 0x01 |
| |
| static inline int mctp_astlpc_kcs_write(struct mctp_binding_astlpc *astlpc, |
| enum mctp_binding_astlpc_kcs_reg reg, |
| uint8_t val) |
| { |
| return astlpc->ops.kcs_write(astlpc->ops_data, reg, val); |
| } |
| |
| static inline int mctp_astlpc_kcs_read(struct mctp_binding_astlpc *astlpc, |
| enum mctp_binding_astlpc_kcs_reg reg, |
| uint8_t *val) |
| { |
| return astlpc->ops.kcs_read(astlpc->ops_data, reg, val); |
| } |
| |
| static inline int mctp_astlpc_lpc_write(struct mctp_binding_astlpc *astlpc, |
| const void *buf, long offset, |
| size_t len) |
| { |
| astlpc_prdebug(astlpc, "%s: %zu bytes to 0x%lx", __func__, len, offset); |
| |
| assert(offset >= 0); |
| |
| /* Indirect access */ |
| if (astlpc->ops.lpc_write) { |
| void *data = astlpc->ops_data; |
| |
| return astlpc->ops.lpc_write(data, buf, offset, len); |
| } |
| |
| /* Direct mapping */ |
| assert(astlpc->lpc_map); |
| memcpy(&((char *)astlpc->lpc_map)[offset], buf, len); |
| |
| return 0; |
| } |
| |
| static inline int mctp_astlpc_lpc_read(struct mctp_binding_astlpc *astlpc, |
| void *buf, long offset, size_t len) |
| { |
| astlpc_prdebug(astlpc, "%s: %zu bytes from 0x%lx", __func__, len, |
| offset); |
| |
| assert(offset >= 0); |
| |
| /* Indirect access */ |
| if (astlpc->ops.lpc_read) { |
| void *data = astlpc->ops_data; |
| |
| return astlpc->ops.lpc_read(data, buf, offset, len); |
| } |
| |
| /* Direct mapping */ |
| assert(astlpc->lpc_map); |
| memcpy(buf, &((char *)astlpc->lpc_map)[offset], len); |
| |
| return 0; |
| } |
| |
| static int mctp_astlpc_kcs_set_status(struct mctp_binding_astlpc *astlpc, |
| uint8_t status) |
| { |
| uint8_t data; |
| int rc; |
| |
| /* Since we're setting the status register, we want the other endpoint |
| * to be interrupted. However, some hardware may only raise a host-side |
| * interrupt on an ODR event. |
| * So, write a dummy value of 0xff to ODR, which will ensure that an |
| * interrupt is triggered, and can be ignored by the host. |
| */ |
| data = 0xff; |
| |
| rc = mctp_astlpc_kcs_write(astlpc, MCTP_ASTLPC_KCS_REG_STATUS, status); |
| if (rc) { |
| astlpc_prwarn(astlpc, "KCS status write failed"); |
| return -1; |
| } |
| |
| rc = mctp_astlpc_kcs_write(astlpc, MCTP_ASTLPC_KCS_REG_DATA, data); |
| if (rc) { |
| astlpc_prwarn(astlpc, "KCS dummy data write failed"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int mctp_astlpc_layout_read(struct mctp_binding_astlpc *astlpc, |
| struct mctp_astlpc_layout *layout) |
| { |
| struct mctp_lpcmap_hdr hdr; |
| int rc; |
| |
| rc = mctp_astlpc_lpc_read(astlpc, &hdr, 0, sizeof(hdr)); |
| if (rc < 0) |
| return rc; |
| |
| /* Flip the buffers as the names are defined in terms of the host */ |
| if (astlpc->mode == MCTP_BINDING_ASTLPC_MODE_BMC) { |
| layout->rx.offset = be32toh(hdr.layout.tx_offset); |
| layout->rx.size = be32toh(hdr.layout.tx_size); |
| layout->tx.offset = be32toh(hdr.layout.rx_offset); |
| layout->tx.size = be32toh(hdr.layout.rx_size); |
| } else { |
| assert(astlpc->mode == MCTP_BINDING_ASTLPC_MODE_HOST); |
| |
| layout->rx.offset = be32toh(hdr.layout.rx_offset); |
| layout->rx.size = be32toh(hdr.layout.rx_size); |
| layout->tx.offset = be32toh(hdr.layout.tx_offset); |
| layout->tx.size = be32toh(hdr.layout.tx_size); |
| } |
| |
| return 0; |
| } |
| |
| static int mctp_astlpc_layout_write(struct mctp_binding_astlpc *astlpc, |
| struct mctp_astlpc_layout *layout) |
| { |
| uint32_t rx_size_be; |
| |
| if (astlpc->mode == MCTP_BINDING_ASTLPC_MODE_BMC) { |
| struct mctp_lpcmap_hdr hdr; |
| |
| /* |
| * Flip the buffers as the names are defined in terms of the |
| * host |
| */ |
| hdr.layout.rx_offset = htobe32(layout->tx.offset); |
| hdr.layout.rx_size = htobe32(layout->tx.size); |
| hdr.layout.tx_offset = htobe32(layout->rx.offset); |
| hdr.layout.tx_size = htobe32(layout->rx.size); |
| |
| return mctp_astlpc_lpc_write(astlpc, &hdr.layout, |
| offsetof(struct mctp_lpcmap_hdr, layout), |
| sizeof(hdr.layout)); |
| } |
| |
| assert(astlpc->mode == MCTP_BINDING_ASTLPC_MODE_HOST); |
| |
| /* |
| * As of v2 we only need to write rx_size - the offsets are controlled |
| * by the BMC, as is the BMC's rx_size (host tx_size). |
| */ |
| rx_size_be = htobe32(layout->rx.size); |
| return mctp_astlpc_lpc_write(astlpc, &rx_size_be, |
| offsetof(struct mctp_lpcmap_hdr, layout.rx_size), |
| sizeof(rx_size_be)); |
| } |
| |
| static bool |
| mctp_astlpc_buffer_validate(const struct mctp_binding_astlpc *astlpc, |
| const struct mctp_astlpc_buffer *buf, |
| const char *name) |
| { |
| /* Check for overflow */ |
| if (buf->offset + buf->size < buf->offset) { |
| mctp_prerr( |
| "%s packet buffer parameters overflow: offset: 0x%" PRIx32 |
| ", size: %" PRIu32, |
| name, buf->offset, buf->size); |
| return false; |
| } |
| |
| /* Check that the buffers are contained within the allocated space */ |
| if (buf->offset + buf->size > LPC_WIN_SIZE) { |
| mctp_prerr( |
| "%s packet buffer parameters exceed %uM window size: offset: 0x%" PRIx32 |
| ", size: %" PRIu32, |
| name, (LPC_WIN_SIZE / (1024 * 1024)), buf->offset, |
| buf->size); |
| return false; |
| } |
| |
| /* Check that the baseline transmission unit is supported */ |
| if (buf->size < astlpc->proto->packet_size(MCTP_PACKET_SIZE(MCTP_BTU))) { |
| mctp_prerr( |
| "%s packet buffer too small: Require %" PRIu32 " bytes to support the %u byte baseline transmission unit, found %" PRIu32, |
| name, |
| astlpc->proto->packet_size(MCTP_PACKET_SIZE(MCTP_BTU)), |
| MCTP_BTU, buf->size); |
| return false; |
| } |
| |
| /* Check for overlap with the control space */ |
| if (buf->offset < control_size) { |
| mctp_prerr( |
| "%s packet buffer overlaps control region {0x%" PRIx32 |
| ", %" PRIu32 "}: Rx {0x%" PRIx32 ", %" PRIu32 "}", |
| name, 0U, control_size, buf->offset, buf->size); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool |
| mctp_astlpc_layout_validate(const struct mctp_binding_astlpc *astlpc, |
| const struct mctp_astlpc_layout *layout) |
| { |
| const struct mctp_astlpc_buffer *rx = &layout->rx; |
| const struct mctp_astlpc_buffer *tx = &layout->tx; |
| bool rx_valid, tx_valid; |
| |
| rx_valid = mctp_astlpc_buffer_validate(astlpc, rx, "Rx"); |
| tx_valid = mctp_astlpc_buffer_validate(astlpc, tx, "Tx"); |
| |
| if (!(rx_valid && tx_valid)) |
| return false; |
| |
| /* Check that the buffers are disjoint */ |
| if ((rx->offset <= tx->offset && rx->offset + rx->size > tx->offset) || |
| (tx->offset <= rx->offset && tx->offset + tx->size > rx->offset)) { |
| mctp_prerr("Rx and Tx packet buffers overlap: Rx {0x%" PRIx32 |
| ", %" PRIu32 "}, Tx {0x%" PRIx32 ", %" PRIu32 "}", |
| rx->offset, rx->size, tx->offset, tx->size); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int mctp_astlpc_init_bmc(struct mctp_binding_astlpc *astlpc) |
| { |
| struct mctp_lpcmap_hdr hdr = { 0 }; |
| uint8_t status; |
| uint32_t sz; |
| |
| /* |
| * The largest buffer size is half of the allocated MCTP space |
| * excluding the control space. |
| */ |
| sz = ((LPC_WIN_SIZE - control_size) / 2); |
| |
| /* |
| * Trim the MTU to a multiple of 16 to meet the requirements of 12.17 |
| * Query Hop in DSP0236 v1.3.0. |
| */ |
| sz = MCTP_BODY_SIZE(astlpc->proto->body_size(sz)); |
| sz &= ~0xfUL; |
| sz = astlpc->proto->packet_size(MCTP_PACKET_SIZE(sz)); |
| |
| if (astlpc->requested_mtu) { |
| uint32_t rpkt, rmtu; |
| |
| rmtu = astlpc->requested_mtu; |
| rpkt = astlpc->proto->packet_size(MCTP_PACKET_SIZE(rmtu)); |
| sz = MIN(sz, rpkt); |
| } |
| |
| /* Flip the buffers as the names are defined in terms of the host */ |
| astlpc->layout.tx.offset = control_size; |
| astlpc->layout.tx.size = sz; |
| astlpc->layout.rx.offset = |
| astlpc->layout.tx.offset + astlpc->layout.tx.size; |
| astlpc->layout.rx.size = sz; |
| |
| if (!mctp_astlpc_layout_validate(astlpc, &astlpc->layout)) { |
| astlpc_prerr(astlpc, "Cannot support an MTU of %" PRIu32, sz); |
| return -EINVAL; |
| } |
| |
| hdr = (struct mctp_lpcmap_hdr){ |
| .magic = htobe32(ASTLPC_MCTP_MAGIC), |
| .bmc_ver_min = htobe16(ASTLPC_VER_MIN), |
| .bmc_ver_cur = htobe16(ASTLPC_VER_CUR), |
| |
| /* Flip the buffers back as we're now describing the host's |
| * configuration to the host */ |
| .layout.rx_offset = htobe32(astlpc->layout.tx.offset), |
| .layout.rx_size = htobe32(astlpc->layout.tx.size), |
| .layout.tx_offset = htobe32(astlpc->layout.rx.offset), |
| .layout.tx_size = htobe32(astlpc->layout.rx.size), |
| }; |
| |
| mctp_astlpc_lpc_write(astlpc, &hdr, 0, sizeof(hdr)); |
| |
| /* |
| * Set status indicating that the BMC is now active. Be explicit about |
| * clearing OBF; we're reinitialising the binding and so any previous |
| * buffer state is irrelevant. |
| */ |
| status = KCS_STATUS_BMC_READY & ~KCS_STATUS_OBF; |
| return mctp_astlpc_kcs_set_status(astlpc, status); |
| } |
| |
| static int mctp_binding_astlpc_start_bmc(struct mctp_binding *b) |
| { |
| struct mctp_binding_astlpc *astlpc = |
| container_of(b, struct mctp_binding_astlpc, binding); |
| |
| astlpc->proto = &astlpc_protocol_version[ASTLPC_VER_CUR]; |
| |
| return mctp_astlpc_init_bmc(astlpc); |
| } |
| |
| static bool mctp_astlpc_validate_version(uint16_t bmc_ver_min, |
| uint16_t bmc_ver_cur, |
| uint16_t host_ver_min, |
| uint16_t host_ver_cur) |
| { |
| if (!(bmc_ver_min && bmc_ver_cur && host_ver_min && host_ver_cur)) { |
| mctp_prerr("Invalid version present in [%" PRIu16 ", %" PRIu16 |
| "], [%" PRIu16 ", %" PRIu16 "]", |
| bmc_ver_min, bmc_ver_cur, host_ver_min, |
| host_ver_cur); |
| return false; |
| } else if (bmc_ver_min > bmc_ver_cur) { |
| mctp_prerr("Invalid bmc version range [%" PRIu16 ", %" PRIu16 |
| "]", |
| bmc_ver_min, bmc_ver_cur); |
| return false; |
| } else if (host_ver_min > host_ver_cur) { |
| mctp_prerr("Invalid host version range [%" PRIu16 ", %" PRIu16 |
| "]", |
| host_ver_min, host_ver_cur); |
| return false; |
| } else if ((host_ver_cur < bmc_ver_min) || |
| (host_ver_min > bmc_ver_cur)) { |
| mctp_prerr( |
| "Unable to satisfy version negotiation with ranges [%" PRIu16 |
| ", %" PRIu16 "] and [%" PRIu16 ", %" PRIu16 "]", |
| bmc_ver_min, bmc_ver_cur, host_ver_min, host_ver_cur); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int mctp_astlpc_negotiate_layout_host(struct mctp_binding_astlpc *astlpc) |
| { |
| struct mctp_astlpc_layout layout; |
| uint32_t rmtu; |
| uint32_t sz; |
| int rc; |
| |
| rc = mctp_astlpc_layout_read(astlpc, &layout); |
| if (rc < 0) |
| return rc; |
| |
| if (!mctp_astlpc_layout_validate(astlpc, &layout)) { |
| astlpc_prerr( |
| astlpc, |
| "BMC provided invalid buffer layout: Rx {0x%" PRIx32 |
| ", %" PRIu32 "}, Tx {0x%" PRIx32 ", %" PRIu32 "}", |
| layout.rx.offset, layout.rx.size, layout.tx.offset, |
| layout.tx.size); |
| return -EINVAL; |
| } |
| |
| astlpc_prinfo(astlpc, "Desire an MTU of %" PRIu32 " bytes", |
| astlpc->requested_mtu); |
| |
| rmtu = astlpc->requested_mtu; |
| sz = astlpc->proto->packet_size(MCTP_PACKET_SIZE(rmtu)); |
| layout.rx.size = sz; |
| |
| if (!mctp_astlpc_layout_validate(astlpc, &layout)) { |
| astlpc_prerr( |
| astlpc, |
| "Generated invalid buffer layout with size %" PRIu32 |
| ": Rx {0x%" PRIx32 ", %" PRIu32 "}, Tx {0x%" PRIx32 |
| ", %" PRIu32 "}", |
| sz, layout.rx.offset, layout.rx.size, layout.tx.offset, |
| layout.tx.size); |
| return -EINVAL; |
| } |
| |
| astlpc_prinfo(astlpc, "Requesting MTU of %" PRIu32 " bytes", |
| astlpc->requested_mtu); |
| |
| return mctp_astlpc_layout_write(astlpc, &layout); |
| } |
| |
| static uint16_t mctp_astlpc_negotiate_version(uint16_t bmc_ver_min, |
| uint16_t bmc_ver_cur, |
| uint16_t host_ver_min, |
| uint16_t host_ver_cur) |
| { |
| if (!mctp_astlpc_validate_version(bmc_ver_min, bmc_ver_cur, |
| host_ver_min, host_ver_cur)) |
| return ASTLPC_VER_BAD; |
| |
| if (bmc_ver_cur < host_ver_cur) |
| return bmc_ver_cur; |
| |
| return host_ver_cur; |
| } |
| |
| static int mctp_astlpc_init_host(struct mctp_binding_astlpc *astlpc) |
| { |
| const uint16_t ver_min_be = htobe16(ASTLPC_VER_MIN); |
| const uint16_t ver_cur_be = htobe16(ASTLPC_VER_CUR); |
| uint16_t bmc_ver_min, bmc_ver_cur, negotiated; |
| struct mctp_lpcmap_hdr hdr; |
| uint8_t status; |
| int rc; |
| |
| rc = mctp_astlpc_kcs_read(astlpc, MCTP_ASTLPC_KCS_REG_STATUS, &status); |
| if (rc) { |
| mctp_prwarn("KCS status read failed"); |
| return rc; |
| } |
| |
| astlpc->kcs_status = status; |
| |
| if (!(status & KCS_STATUS_BMC_READY)) |
| return -EHOSTDOWN; |
| |
| mctp_astlpc_lpc_read(astlpc, &hdr, 0, sizeof(hdr)); |
| |
| bmc_ver_min = be16toh(hdr.bmc_ver_min); |
| bmc_ver_cur = be16toh(hdr.bmc_ver_cur); |
| |
| /* Calculate the expected value of negotiated_ver */ |
| negotiated = mctp_astlpc_negotiate_version(bmc_ver_min, bmc_ver_cur, |
| ASTLPC_VER_MIN, |
| ASTLPC_VER_CUR); |
| if (!negotiated) { |
| astlpc_prerr(astlpc, "Cannot negotiate with invalid versions"); |
| return -EINVAL; |
| } |
| |
| /* Assign protocol ops so we can calculate the packet buffer sizes */ |
| assert(negotiated < ARRAY_SIZE(astlpc_protocol_version)); |
| astlpc->proto = &astlpc_protocol_version[negotiated]; |
| |
| /* Negotiate packet buffers in v2 style if the BMC supports it */ |
| if (negotiated >= 2) { |
| rc = mctp_astlpc_negotiate_layout_host(astlpc); |
| if (rc < 0) |
| return rc; |
| } |
| |
| /* Advertise the host's supported protocol versions */ |
| mctp_astlpc_lpc_write(astlpc, &ver_min_be, |
| offsetof(struct mctp_lpcmap_hdr, host_ver_min), |
| sizeof(ver_min_be)); |
| |
| mctp_astlpc_lpc_write(astlpc, &ver_cur_be, |
| offsetof(struct mctp_lpcmap_hdr, host_ver_cur), |
| sizeof(ver_cur_be)); |
| |
| /* Send channel init command */ |
| rc = mctp_astlpc_kcs_write(astlpc, MCTP_ASTLPC_KCS_REG_DATA, 0x0); |
| if (rc) { |
| astlpc_prwarn(astlpc, "KCS write failed"); |
| } |
| |
| /* |
| * Configure the host so `astlpc->proto->version == 0` holds until we |
| * receive a subsequent status update from the BMC. Until then, |
| * `astlpc->proto->version == 0` indicates that we're yet to complete |
| * the channel initialisation handshake. |
| * |
| * When the BMC provides a status update with KCS_STATUS_CHANNEL_ACTIVE |
| * set we will assign the appropriate protocol ops struct in accordance |
| * with `negotiated_ver`. |
| */ |
| astlpc->proto = &astlpc_protocol_version[ASTLPC_VER_BAD]; |
| |
| return rc; |
| } |
| |
| static int mctp_binding_astlpc_start_host(struct mctp_binding *b) |
| { |
| struct mctp_binding_astlpc *astlpc = |
| container_of(b, struct mctp_binding_astlpc, binding); |
| |
| return mctp_astlpc_init_host(astlpc); |
| } |
| |
| static bool __mctp_astlpc_kcs_ready(struct mctp_binding_astlpc *astlpc, |
| uint8_t status, bool is_write) |
| { |
| bool is_bmc; |
| bool ready_state; |
| uint8_t flag; |
| |
| is_bmc = (astlpc->mode == MCTP_BINDING_ASTLPC_MODE_BMC); |
| flag = (is_bmc ^ is_write) ? KCS_STATUS_IBF : KCS_STATUS_OBF; |
| ready_state = is_write ? 0 : 1; |
| |
| return !!(status & flag) == ready_state; |
| } |
| |
| static inline bool |
| mctp_astlpc_kcs_read_ready(struct mctp_binding_astlpc *astlpc, uint8_t status) |
| { |
| return __mctp_astlpc_kcs_ready(astlpc, status, false); |
| } |
| |
| static inline bool |
| mctp_astlpc_kcs_write_ready(struct mctp_binding_astlpc *astlpc, uint8_t status) |
| { |
| return __mctp_astlpc_kcs_ready(astlpc, status, true); |
| } |
| |
| static int mctp_astlpc_kcs_send(struct mctp_binding_astlpc *astlpc, |
| uint8_t data) |
| { |
| uint8_t status; |
| int rc; |
| |
| for (;;) { |
| rc = mctp_astlpc_kcs_read(astlpc, MCTP_ASTLPC_KCS_REG_STATUS, |
| &status); |
| if (rc) { |
| astlpc_prwarn(astlpc, "KCS status read failed"); |
| return -1; |
| } |
| if (mctp_astlpc_kcs_write_ready(astlpc, status)) |
| break; |
| /* todo: timeout */ |
| } |
| |
| rc = mctp_astlpc_kcs_write(astlpc, MCTP_ASTLPC_KCS_REG_DATA, data); |
| if (rc) { |
| astlpc_prwarn(astlpc, "KCS data write failed"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int mctp_binding_astlpc_tx(struct mctp_binding *b, |
| struct mctp_pktbuf *pkt) |
| { |
| struct mctp_binding_astlpc *astlpc = binding_to_astlpc(b); |
| uint32_t len, len_be; |
| struct mctp_hdr *hdr; |
| |
| hdr = mctp_pktbuf_hdr(pkt); |
| len = mctp_pktbuf_size(pkt); |
| |
| astlpc_prdebug(astlpc, |
| "%s: Transmitting %" PRIu32 |
| "-byte packet (%hhu, %hhu, 0x%hhx)", |
| __func__, len, hdr->src, hdr->dest, hdr->flags_seq_tag); |
| |
| if (len > astlpc->proto->body_size(astlpc->layout.tx.size)) { |
| astlpc_prwarn(astlpc, "invalid TX len %" PRIu32 ": %" PRIu32, len, |
| astlpc->proto->body_size(astlpc->layout.tx.size)); |
| return -1; |
| } |
| |
| len_be = htobe32(len); |
| mctp_astlpc_lpc_write(astlpc, &len_be, astlpc->layout.tx.offset, |
| sizeof(len_be)); |
| |
| astlpc->proto->pktbuf_protect(pkt); |
| len = mctp_pktbuf_size(pkt); |
| |
| mctp_astlpc_lpc_write(astlpc, hdr, astlpc->layout.tx.offset + 4, len); |
| |
| mctp_binding_set_tx_enabled(b, false); |
| |
| mctp_astlpc_kcs_send(astlpc, 0x1); |
| |
| return 0; |
| } |
| |
| static uint32_t mctp_astlpc_calculate_mtu(struct mctp_binding_astlpc *astlpc, |
| struct mctp_astlpc_layout *layout) |
| { |
| uint32_t low, high, limit, rpkt; |
| |
| /* Derive the largest MTU the BMC _can_ support */ |
| low = MIN(astlpc->layout.rx.offset, astlpc->layout.tx.offset); |
| high = MAX(astlpc->layout.rx.offset, astlpc->layout.tx.offset); |
| limit = high - low; |
| |
| /* Determine the largest MTU the BMC _wants_ to support */ |
| if (astlpc->requested_mtu) { |
| uint32_t rmtu = astlpc->requested_mtu; |
| |
| rpkt = astlpc->proto->packet_size(MCTP_PACKET_SIZE(rmtu)); |
| limit = MIN(limit, rpkt); |
| } |
| |
| /* Determine the accepted MTU, applied both directions by convention */ |
| rpkt = MIN(limit, layout->tx.size); |
| return MCTP_BODY_SIZE(astlpc->proto->body_size(rpkt)); |
| } |
| |
| static int mctp_astlpc_negotiate_layout_bmc(struct mctp_binding_astlpc *astlpc) |
| { |
| struct mctp_astlpc_layout proposed, pending; |
| uint32_t sz, mtu; |
| int rc; |
| |
| /* Do we have a valid protocol version? */ |
| if (!astlpc->proto->version) |
| return -EINVAL; |
| |
| /* Extract the host's proposed layout */ |
| rc = mctp_astlpc_layout_read(astlpc, &proposed); |
| if (rc < 0) |
| return rc; |
| |
| /* Do we have a reasonable layout? */ |
| if (!mctp_astlpc_layout_validate(astlpc, &proposed)) |
| return -EINVAL; |
| |
| /* Negotiate the MTU */ |
| mtu = mctp_astlpc_calculate_mtu(astlpc, &proposed); |
| sz = astlpc->proto->packet_size(MCTP_PACKET_SIZE(mtu)); |
| |
| /* |
| * Use symmetric MTUs by convention and to pass constraints in rx/tx |
| * functions |
| */ |
| pending = astlpc->layout; |
| pending.tx.size = sz; |
| pending.rx.size = sz; |
| |
| if (mctp_astlpc_layout_validate(astlpc, &pending)) { |
| /* We found a sensible Rx MTU, so honour it */ |
| astlpc->layout = pending; |
| |
| /* Enforce the negotiated MTU */ |
| rc = mctp_astlpc_layout_write(astlpc, &astlpc->layout); |
| if (rc < 0) |
| return rc; |
| |
| astlpc_prinfo(astlpc, "Negotiated an MTU of %" PRIu32 " bytes", |
| mtu); |
| } else { |
| astlpc_prwarn(astlpc, "MTU negotiation failed"); |
| return -EINVAL; |
| } |
| |
| if (astlpc->proto->version >= 2) |
| astlpc->binding.pkt_size = MCTP_PACKET_SIZE(mtu); |
| |
| return 0; |
| } |
| |
| static void mctp_astlpc_init_channel(struct mctp_binding_astlpc *astlpc) |
| { |
| uint16_t negotiated, negotiated_be; |
| struct mctp_lpcmap_hdr hdr; |
| uint8_t status; |
| int rc; |
| |
| mctp_astlpc_lpc_read(astlpc, &hdr, 0, sizeof(hdr)); |
| |
| /* Version negotiation */ |
| negotiated = |
| mctp_astlpc_negotiate_version(ASTLPC_VER_MIN, ASTLPC_VER_CUR, |
| be16toh(hdr.host_ver_min), |
| be16toh(hdr.host_ver_cur)); |
| |
| /* MTU negotiation requires knowing which protocol we'll use */ |
| assert(negotiated < ARRAY_SIZE(astlpc_protocol_version)); |
| astlpc->proto = &astlpc_protocol_version[negotiated]; |
| |
| /* Host Rx MTU negotiation: Failure terminates channel init */ |
| rc = mctp_astlpc_negotiate_layout_bmc(astlpc); |
| if (rc < 0) |
| negotiated = ASTLPC_VER_BAD; |
| |
| /* Populate the negotiated version */ |
| negotiated_be = htobe16(negotiated); |
| mctp_astlpc_lpc_write(astlpc, &negotiated_be, |
| offsetof(struct mctp_lpcmap_hdr, negotiated_ver), |
| sizeof(negotiated_be)); |
| |
| /* Finalise the configuration */ |
| status = KCS_STATUS_BMC_READY | KCS_STATUS_OBF; |
| if (negotiated > 0) { |
| astlpc_prinfo(astlpc, "Negotiated binding version %" PRIu16, |
| negotiated); |
| status |= KCS_STATUS_CHANNEL_ACTIVE; |
| } else { |
| astlpc_prerr(astlpc, "Failed to initialise channel"); |
| } |
| |
| mctp_astlpc_kcs_set_status(astlpc, status); |
| |
| mctp_binding_set_tx_enabled(&astlpc->binding, |
| status & KCS_STATUS_CHANNEL_ACTIVE); |
| } |
| |
| static void mctp_astlpc_rx_start(struct mctp_binding_astlpc *astlpc) |
| { |
| struct mctp_pktbuf *pkt; |
| uint32_t body, packet; |
| |
| mctp_astlpc_lpc_read(astlpc, &body, astlpc->layout.rx.offset, |
| sizeof(body)); |
| body = be32toh(body); |
| |
| if (body > astlpc->proto->body_size(astlpc->layout.rx.size)) { |
| astlpc_prwarn(astlpc, "invalid RX len 0x%x", body); |
| return; |
| } |
| |
| assert(astlpc->binding.pkt_size >= 0); |
| if (body > (uint32_t)astlpc->binding.pkt_size) { |
| astlpc_prwarn(astlpc, "invalid RX len 0x%x", body); |
| return; |
| } |
| |
| /* Eliminate the medium-specific header that we just read */ |
| packet = astlpc->proto->packet_size(body) - 4; |
| pkt = mctp_pktbuf_alloc(&astlpc->binding, packet); |
| if (!pkt) |
| goto out_complete; |
| |
| /* |
| * Read payload and medium-specific trailer from immediately after the |
| * medium-specific header. |
| */ |
| mctp_astlpc_lpc_read(astlpc, mctp_pktbuf_hdr(pkt), |
| astlpc->layout.rx.offset + 4, packet); |
| |
| /* |
| * v3 will validate the CRC32 in the medium-specific trailer and adjust |
| * the packet size accordingly. On older protocols validation is a no-op |
| * that always returns true. |
| */ |
| if (astlpc->proto->pktbuf_validate(pkt)) { |
| mctp_bus_rx(&astlpc->binding, pkt); |
| } else { |
| /* TODO: Drop any associated assembly */ |
| mctp_pktbuf_free(pkt); |
| astlpc_prdebug(astlpc, "Dropped corrupt packet"); |
| } |
| |
| out_complete: |
| mctp_astlpc_kcs_send(astlpc, 0x2); |
| } |
| |
| static void mctp_astlpc_tx_complete(struct mctp_binding_astlpc *astlpc) |
| { |
| mctp_binding_set_tx_enabled(&astlpc->binding, true); |
| } |
| |
| static int mctp_astlpc_finalise_channel(struct mctp_binding_astlpc *astlpc) |
| { |
| struct mctp_astlpc_layout layout; |
| uint16_t negotiated; |
| int rc; |
| |
| rc = mctp_astlpc_lpc_read(astlpc, &negotiated, |
| offsetof(struct mctp_lpcmap_hdr, |
| negotiated_ver), |
| sizeof(negotiated)); |
| if (rc < 0) |
| return rc; |
| |
| negotiated = be16toh(negotiated); |
| astlpc_prerr(astlpc, "Version negotiation got: %u", negotiated); |
| |
| if (negotiated == ASTLPC_VER_BAD || negotiated < ASTLPC_VER_MIN || |
| negotiated > ASTLPC_VER_CUR) { |
| astlpc_prerr(astlpc, "Failed to negotiate version, got: %u\n", |
| negotiated); |
| return -EINVAL; |
| } |
| |
| assert(negotiated < ARRAY_SIZE(astlpc_protocol_version)); |
| astlpc->proto = &astlpc_protocol_version[negotiated]; |
| |
| rc = mctp_astlpc_layout_read(astlpc, &layout); |
| if (rc < 0) |
| return rc; |
| |
| if (!mctp_astlpc_layout_validate(astlpc, &layout)) { |
| mctp_prerr("BMC proposed invalid buffer parameters"); |
| return -EINVAL; |
| } |
| |
| astlpc->layout = layout; |
| |
| if (negotiated >= 2) |
| astlpc->binding.pkt_size = |
| astlpc->proto->body_size(astlpc->layout.tx.size); |
| |
| return 0; |
| } |
| |
| static int mctp_astlpc_update_channel(struct mctp_binding_astlpc *astlpc, |
| uint8_t status) |
| { |
| uint8_t updated; |
| int rc = 0; |
| |
| assert(astlpc->mode == MCTP_BINDING_ASTLPC_MODE_HOST); |
| |
| updated = astlpc->kcs_status ^ status; |
| |
| astlpc_prdebug(astlpc, "%s: status: 0x%x, update: 0x%x", __func__, |
| status, updated); |
| |
| if (updated & KCS_STATUS_BMC_READY) { |
| if (status & KCS_STATUS_BMC_READY) { |
| astlpc->kcs_status = status; |
| return astlpc->binding.start(&astlpc->binding); |
| } else { |
| mctp_binding_set_tx_enabled(&astlpc->binding, false); |
| } |
| } |
| |
| if (astlpc->proto->version == 0 || |
| updated & KCS_STATUS_CHANNEL_ACTIVE) { |
| bool enable; |
| |
| rc = mctp_astlpc_finalise_channel(astlpc); |
| enable = (status & KCS_STATUS_CHANNEL_ACTIVE) && rc == 0; |
| |
| mctp_binding_set_tx_enabled(&astlpc->binding, enable); |
| } |
| |
| astlpc->kcs_status = status; |
| |
| return rc; |
| } |
| |
| int mctp_astlpc_poll(struct mctp_binding_astlpc *astlpc) |
| { |
| uint8_t status, data; |
| int rc; |
| |
| rc = mctp_astlpc_kcs_read(astlpc, MCTP_ASTLPC_KCS_REG_STATUS, &status); |
| if (rc) { |
| astlpc_prwarn(astlpc, "KCS read error"); |
| return -1; |
| } |
| |
| astlpc_prdebug(astlpc, "%s: status: 0x%hhx", __func__, status); |
| |
| if (!mctp_astlpc_kcs_read_ready(astlpc, status)) |
| return 0; |
| |
| rc = mctp_astlpc_kcs_read(astlpc, MCTP_ASTLPC_KCS_REG_DATA, &data); |
| if (rc) { |
| astlpc_prwarn(astlpc, "KCS data read error"); |
| return -1; |
| } |
| |
| astlpc_prdebug(astlpc, "%s: data: 0x%hhx", __func__, data); |
| |
| if (!astlpc->proto->version && !(data == 0x0 || data == 0xff)) { |
| astlpc_prwarn(astlpc, "Invalid message for binding state: 0x%x", |
| data); |
| return 0; |
| } |
| |
| switch (data) { |
| case 0x0: |
| mctp_astlpc_init_channel(astlpc); |
| break; |
| case 0x1: |
| mctp_astlpc_rx_start(astlpc); |
| break; |
| case 0x2: |
| mctp_astlpc_tx_complete(astlpc); |
| break; |
| case 0xff: |
| /* No responsibilities for the BMC on 0xff */ |
| if (astlpc->mode == MCTP_BINDING_ASTLPC_MODE_HOST) { |
| rc = mctp_astlpc_update_channel(astlpc, status); |
| if (rc < 0) |
| return rc; |
| } |
| break; |
| default: |
| astlpc_prwarn(astlpc, "unknown message 0x%x", data); |
| } |
| |
| /* Handle silent loss of bmc-ready */ |
| if (astlpc->mode == MCTP_BINDING_ASTLPC_MODE_HOST) { |
| if (!(status & KCS_STATUS_BMC_READY && data == 0xff)) |
| return mctp_astlpc_update_channel(astlpc, status); |
| } |
| |
| return rc; |
| } |
| |
| /* allocate and basic initialisation */ |
| static struct mctp_binding_astlpc *__mctp_astlpc_init(uint8_t mode, |
| uint32_t mtu) |
| { |
| struct mctp_binding_astlpc *astlpc; |
| |
| assert((mode == MCTP_BINDING_ASTLPC_MODE_BMC) || |
| (mode == MCTP_BINDING_ASTLPC_MODE_HOST)); |
| |
| astlpc = __mctp_alloc(sizeof(*astlpc)); |
| if (!astlpc) |
| return NULL; |
| |
| memset(astlpc, 0, sizeof(*astlpc)); |
| astlpc->mode = mode; |
| astlpc->lpc_map = NULL; |
| astlpc->requested_mtu = mtu; |
| astlpc->binding.name = "astlpc"; |
| astlpc->binding.version = 1; |
| astlpc->binding.pkt_size = |
| MCTP_PACKET_SIZE(mtu > MCTP_BTU ? mtu : MCTP_BTU); |
| astlpc->binding.pkt_header = 4; |
| astlpc->binding.pkt_trailer = 4; |
| astlpc->binding.tx = mctp_binding_astlpc_tx; |
| if (mode == MCTP_BINDING_ASTLPC_MODE_BMC) |
| astlpc->binding.start = mctp_binding_astlpc_start_bmc; |
| else if (mode == MCTP_BINDING_ASTLPC_MODE_HOST) |
| astlpc->binding.start = mctp_binding_astlpc_start_host; |
| else { |
| astlpc_prerr(astlpc, "%s: Invalid mode: %d\n", __func__, mode); |
| __mctp_free(astlpc); |
| return NULL; |
| } |
| |
| return astlpc; |
| } |
| |
| struct mctp_binding *mctp_binding_astlpc_core(struct mctp_binding_astlpc *b) |
| { |
| return &b->binding; |
| } |
| |
| struct mctp_binding_astlpc * |
| mctp_astlpc_init(uint8_t mode, uint32_t mtu, void *lpc_map, |
| const struct mctp_binding_astlpc_ops *ops, void *ops_data) |
| { |
| struct mctp_binding_astlpc *astlpc; |
| |
| if (!(mode == MCTP_BINDING_ASTLPC_MODE_BMC || |
| mode == MCTP_BINDING_ASTLPC_MODE_HOST)) { |
| mctp_prerr("Unknown binding mode: %u", mode); |
| return NULL; |
| } |
| |
| astlpc = __mctp_astlpc_init(mode, mtu); |
| if (!astlpc) |
| return NULL; |
| |
| memcpy(&astlpc->ops, ops, sizeof(astlpc->ops)); |
| astlpc->ops_data = ops_data; |
| astlpc->lpc_map = lpc_map; |
| astlpc->mode = mode; |
| |
| return astlpc; |
| } |
| |
| struct mctp_binding_astlpc * |
| mctp_astlpc_init_ops(const struct mctp_binding_astlpc_ops *ops, void *ops_data, |
| void *lpc_map) |
| { |
| return mctp_astlpc_init(MCTP_BINDING_ASTLPC_MODE_BMC, MCTP_BTU, lpc_map, |
| ops, ops_data); |
| } |
| |
| void mctp_astlpc_destroy(struct mctp_binding_astlpc *astlpc) |
| { |
| /* Clear channel-active and bmc-ready */ |
| if (astlpc->mode == MCTP_BINDING_ASTLPC_MODE_BMC) |
| mctp_astlpc_kcs_set_status(astlpc, KCS_STATUS_OBF); |
| __mctp_free(astlpc); |
| } |
| |
| #ifdef MCTP_HAVE_FILEIO |
| |
| static int mctp_astlpc_init_fileio_lpc(struct mctp_binding_astlpc *astlpc) |
| { |
| struct aspeed_lpc_ctrl_mapping map = { |
| .window_type = ASPEED_LPC_CTRL_WINDOW_MEMORY, |
| .window_id = 0, /* There's only one */ |
| .flags = 0, |
| .addr = 0, |
| .offset = 0, |
| .size = 0 |
| }; |
| void *lpc_map_base; |
| int fd, rc; |
| |
| fd = open(lpc_path, O_RDWR | O_SYNC); |
| if (fd < 0) { |
| astlpc_prwarn(astlpc, "LPC open (%s) failed", lpc_path); |
| return -1; |
| } |
| |
| rc = ioctl(fd, ASPEED_LPC_CTRL_IOCTL_GET_SIZE, &map); |
| if (rc) { |
| astlpc_prwarn(astlpc, "LPC GET_SIZE failed"); |
| close(fd); |
| return -1; |
| } |
| |
| lpc_map_base = |
| mmap(NULL, map.size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); |
| if (lpc_map_base == MAP_FAILED) { |
| astlpc_prwarn(astlpc, "LPC mmap failed"); |
| rc = -1; |
| } else { |
| astlpc->lpc_map = lpc_map_base + map.size - LPC_WIN_SIZE; |
| } |
| |
| close(fd); |
| |
| return rc; |
| } |
| |
| static int mctp_astlpc_init_fileio_kcs(struct mctp_binding_astlpc *astlpc) |
| { |
| astlpc->kcs_fd = open(kcs_path, O_RDWR); |
| if (astlpc->kcs_fd < 0) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int __mctp_astlpc_fileio_kcs_read(void *arg, |
| enum mctp_binding_astlpc_kcs_reg reg, uint8_t *val) |
| { |
| struct mctp_binding_astlpc *astlpc = arg; |
| off_t offset = reg; |
| int rc; |
| |
| rc = pread(astlpc->kcs_fd, val, 1, offset); |
| |
| return rc == 1 ? 0 : -1; |
| } |
| |
| static int __mctp_astlpc_fileio_kcs_write(void *arg, |
| enum mctp_binding_astlpc_kcs_reg reg, uint8_t val) |
| { |
| struct mctp_binding_astlpc *astlpc = arg; |
| off_t offset = reg; |
| int rc; |
| |
| rc = pwrite(astlpc->kcs_fd, &val, 1, offset); |
| |
| return rc == 1 ? 0 : -1; |
| } |
| |
| int mctp_astlpc_get_fd(struct mctp_binding_astlpc *astlpc) |
| { |
| return astlpc->kcs_fd; |
| } |
| |
| struct mctp_binding_astlpc *mctp_astlpc_init_fileio(void) |
| { |
| struct mctp_binding_astlpc *astlpc; |
| int rc; |
| |
| /* |
| * If we're doing file IO then we're very likely not running |
| * freestanding, so lets assume that we're on the BMC side. |
| * |
| * Requesting an MTU of 0 requests the largest possible MTU, whatever |
| * value that might take. |
| */ |
| astlpc = __mctp_astlpc_init(MCTP_BINDING_ASTLPC_MODE_BMC, 0); |
| if (!astlpc) |
| return NULL; |
| |
| /* Set internal operations for kcs. We use direct accesses to the lpc |
| * map area */ |
| astlpc->ops.kcs_read = __mctp_astlpc_fileio_kcs_read; |
| astlpc->ops.kcs_write = __mctp_astlpc_fileio_kcs_write; |
| astlpc->ops_data = astlpc; |
| |
| rc = mctp_astlpc_init_fileio_lpc(astlpc); |
| if (rc) { |
| free(astlpc); |
| return NULL; |
| } |
| |
| rc = mctp_astlpc_init_fileio_kcs(astlpc); |
| if (rc) { |
| free(astlpc); |
| return NULL; |
| } |
| |
| return astlpc; |
| } |
| #else |
| struct mctp_binding_astlpc * __attribute__((const)) |
| mctp_astlpc_init_fileio(void) |
| { |
| astlpc_prerr(astlpc, "Missing support for file IO"); |
| return NULL; |
| } |
| |
| int __attribute__((const)) mctp_astlpc_get_fd( |
| struct mctp_binding_astlpc *astlpc __attribute__((unused))) |
| { |
| astlpc_prerr(astlpc, "Missing support for file IO"); |
| return -1; |
| } |
| #endif |