| /dts-v1/; |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "HPE,GXP"; |
| model = "GXP"; |
| |
| chosen { |
| bootargs = "earlyprintk console=ttyS0,115200 user_debug=31"; |
| }; |
| |
| aliases { |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x40000000 0x20000000>; |
| }; |
| |
| ahb@80000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| vic0: vic@ceff0000 { |
| compatible = "arm,pl192-vic"; |
| interrupt-controller; |
| reg = <0xceff0000 0x1000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| vic1: vic@80f00000 { |
| compatible = "arm,pl192-vic"; |
| interrupt-controller; |
| reg = <0x80f00000 0x1000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| timer0: timer@c0000080 { |
| compatible = "hpe,gxp-timer"; |
| reg = <0xc0000080 0x1>, <0xc0000094 0x01>, <0xc0000088 0x08>; |
| interrupts = <0>; |
| interrupt-parent = <&vic0>; |
| clock-frequency = <400000000>; |
| }; |
| |
| watchdog: watchdog@c0000090 { |
| compatible = "hpe,gxp-wdt"; |
| reg = <0xc0000090 0x02>, <0xc0000096 0x01>; |
| }; |
| |
| uartc: serial@c00000f0 { |
| compatible = "ns16550a"; |
| reg = <0xc00000f0 0x8>; |
| interrupts = <19>; |
| interrupt-parent = <&vic0>; |
| clock-frequency = <1846153>; |
| reg-shift = <0>; |
| }; |
| |
| uarta: serial@c00000e0 { |
| compatible = "ns16550a"; |
| reg = <0xc00000e0 0x8>; |
| interrupts = <17>; |
| interrupt-parent = <&vic0>; |
| clock-frequency = <1846153>; |
| reg-shift = <0>; |
| }; |
| |
| uartb: serial@c00000e8 { |
| compatible = "ns16550a"; |
| reg = <0xc00000e8 0x8>; |
| interrupts = <18>; |
| interrupt-parent = <&vic0>; |
| clock-frequency = <1846153>; |
| reg-shift = <0>; |
| }; |
| |
| vuart_a_cfg: vuarta_cfg@80fc0230 { |
| compatible = "hpe,gxp-vuarta_cfg", "simple-mfd", "syscon"; |
| reg = <0x80fc0230 0x100>; |
| reg-io-width = <1>; |
| }; |
| |
| vuart_a: vuart_a@80fd0200 { |
| compatible = "hpe,gxp-vuart"; |
| reg = <0x80fd0200 0x100>; |
| interrupts = <2>; |
| interrupt-parent = <&vic1>; |
| clock-frequency = <1846153>; |
| reg-shift = <0>; |
| status = "okay"; |
| serial-line = <3>; |
| vuart_cfg = <&vuart_a_cfg>; |
| }; |
| |
| spifi0: spifi@c0000200 { |
| compatible = "hpe,gxp-spifi"; |
| reg = <0xc0000200 0x80>, <0xc000c000 0x100>, <0xf8000000 0x8000000>; |
| interrupts = <20>; |
| interrupt-parent = <&vic0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| u-boot@0 { |
| label = "u-boot"; |
| reg = <0x0 0x60000>; |
| }; |
| u-boot-env@60000 { |
| label = "u-boot-env"; |
| reg = <0x60000 0x20000>; |
| }; |
| kernel@80000 { |
| label = "kernel"; |
| reg = <0x80000 0x4c0000>; |
| }; |
| rofs@540000 { |
| label = "rofs"; |
| reg = <0x540000 0x1740000>; |
| }; |
| rwfs@1c80000 { |
| label = "rwfs"; |
| reg = <0x1c80000 0x250000>; |
| }; |
| section@1edf000{ |
| labele = "section"; |
| reg = <0x1ed0000 0x130000>; |
| }; |
| }; |
| }; |
| |
| flash@1 { |
| compatible = "jedec,spi-nor"; |
| reg = <1>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| host-prime@0 { |
| label = "host-prime"; |
| reg = <0x0 0x02000000>; |
| }; |
| host-second@0 { |
| label = "host-second"; |
| reg = <0x02000000 0x02000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| sram@d0000000 { |
| compatible = "mtd-ram"; |
| reg = <0xd0000000 0x80000>; |
| bank-width = <1>; |
| erase-size =<1>; |
| partition@0 { |
| label = "host-reserved"; |
| reg = <0x0 0x10000>; |
| }; |
| partition@10000 { |
| label = "nvram"; |
| reg = <0x10000 0x70000>; |
| }; |
| }; |
| |
| srom@80fc0000 { |
| compatible = "hpe,gxp-srom", "simple-mfd", "syscon"; |
| reg = <0x80fc0000 0x100>; |
| }; |
| |
| vrom@58000000 { |
| compatible = "mtd-ram"; |
| bank-width = <4>; |
| reg = <0x58000000 0x4000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "vrom-prime"; |
| reg = <0x0 0x2000000>; |
| }; |
| partition@2000000 { |
| label = "vrom-second"; |
| reg = <0x2000000 0x2000000>; |
| }; |
| }; |
| |
| i2cg: i2cg@c00000f8 { |
| compatible = "syscon"; |
| reg = <0xc00000f8 0x08>; |
| }; |
| |
| i2c0: i2c@c0002000 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002000 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@c0002100 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002100 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@c0002200 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002200 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| at24c02@50 { |
| compatible = "at24,24c02"; |
| pagesize = <8>; |
| reg = <0x50>; |
| }; |
| }; |
| |
| i2c3: i2c@c0002300 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002300 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c4: i2c@c0002400 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002400 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c5: i2c@c0002500 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002500 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| emc1402@4c { |
| compatible = "emc1402"; |
| reg = <0x4c>; |
| }; |
| |
| emc1404@1c { |
| compatible = "emc1404"; |
| reg = <0x1c>; |
| }; |
| }; |
| |
| i2c6: i2c@c0002600 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002600 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c7: i2c@c0002700 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002700 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| psu1: psu@58 { |
| compatible = "hpe,gxp-psu"; |
| reg = <0x58>; |
| }; |
| |
| psu2: psu@59 { |
| compatible = "hpe,gxp-psu"; |
| reg = <0x59>; |
| }; |
| }; |
| |
| i2c8: i2c@c0002800 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002800 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c9: i2c@c0002900 { |
| compatible = "hpe,gxp-i2c"; |
| reg = <0xc0002900 0x70>; |
| interrupts = <9>; |
| interrupt-parent = <&vic0>; |
| i2cg-handle = <&i2cg>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2cmux@4 { |
| compatible = "i2c-mux-reg"; |
| i2c-parent = <&i2c4>; |
| reg = <0xd1000374 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c4@1 { |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c4@3 { |
| reg = <3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c4@4 { |
| reg = <4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| i2cmux@6 { |
| compatible = "i2c-mux-reg"; |
| i2c-parent = <&i2c6>; |
| reg = <0xd1000376 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c6@1 { |
| reg = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c6@2 { |
| reg = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c6@3 { |
| reg = <3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c6@4 { |
| reg = <4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c6@5 { |
| reg = <5>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| mdio0: mdio@c0004080 { |
| compatible = "hpe,gxp-umac-mdio"; |
| reg = <0xc0004080 0x10>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ext_phy0: ethernt-phy@0 { |
| compatible = "marvell,88e1415","ethernet-phy-ieee802.3-c22"; |
| phy-mode = "sgmii"; |
| reg = <0>; |
| }; |
| }; |
| |
| mdio1: mdio@c0005080 { |
| compatible = "hpe,gxp-umac-mdio"; |
| reg = <0xc0005080 0x10>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| int_phy0: ethernt-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| phy-mode = "gmii"; |
| reg = <0>; |
| }; |
| int_phy1: ethernt-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| phy-mode = "gmii"; |
| reg = <1>; |
| }; |
| }; |
| |
| umac0: umac@c0004000 { |
| compatible = "hpe, gxp-umac"; |
| reg = <0xc0004000 0x80>; |
| interrupts = <10>; |
| interrupt-parent = <&vic0>; |
| mac-address = [94 18 82 16 04 d8]; |
| phy-handle = <&ext_phy0>; |
| int-phy-handle = <&int_phy0>; |
| }; |
| |
| umac1: umac@c0005000 { |
| compatible = "hpe, gxp-umac"; |
| use-ncsi; |
| reg = <0xc0005000 0x80>; |
| interrupts = <11>; |
| interrupt-parent = <&vic0>; |
| mac-address = [94 18 82 16 04 d9]; |
| phy-handle = <&int_phy1>; |
| }; |
| |
| kcs_conf: kcs_conf@80fc0430 { |
| compatible = "hpe,gxp-kcs-bmc-cfg", "simple-mfd", "syscon"; |
| reg = <0x80fc0430 0x100>; |
| }; |
| |
| kcs_reg: kcs_reg@080fd0400 { |
| compatible = "hpe,gxp-kcs-bmc"; |
| reg = <0x80fd0400 0x8>; |
| interrupts = <6>; |
| interrupt-parent = <&vic1>; |
| kcs_chan = <1>; |
| status = "okay"; |
| kcs-bmc-cfg = <&kcs_conf>; |
| }; |
| |
| thumbnail: thumbnail@c0000500 { |
| compatible = "hpe,gxp-thumbnail"; |
| reg = <0xc0000500 0x20>; |
| bits-per-pixel = <32>; |
| width = <800>; |
| height = <600>; |
| }; |
| |
| xreg: xreg@d1000000 { |
| compatible = "hpe,gxp-xreg", "simple-mfd", "syscon"; |
| reg = <0xd1000300 0xFF>; |
| }; |
| |
| fanctrl: fanctrl@c1000c00 { |
| compatible = "hpe,gxp-fan-ctrl"; |
| reg = <0xc1000c00 0x200>; |
| xreg_handle = <&xreg>; |
| fn2_handle = <&fn2>; |
| }; |
| |
| fn2: fn2@80200000 { |
| compatible = "hpe,gxp-fn2", "simple-mfd", "syscon"; |
| reg = <0x80200000 0x100000>; |
| interrupts = <0>; |
| interrupt-parent = <&vic1>; |
| }; |
| |
| csm: csm@80000000 { |
| compatible = "hpe,gxp-csm", "simple-mfd", "syscon"; |
| reg = <0x80000000 0x100000>; |
| }; |
| |
| gpio: gpio { |
| compatible = "hpe,gxp-gpio"; |
| #gpio-cells = <2>; |
| csm_handle = <&csm>; |
| fn2_handle = <&fn2>; |
| xreg_handle = <&xreg>; |
| vuhc0_handle = <&vuhc0>; |
| interrupts = <26>; |
| interrupt-parent = <&vic0>; |
| }; |
| |
| leds: leds { |
| compatible = "gpio-leds"; |
| |
| power { |
| gpios = <&gpio 306 0>; |
| default-state = "off"; |
| }; |
| |
| heartbeat { |
| gpios = <&gpio 307 0>; |
| default-state = "off"; |
| }; |
| |
| identify { |
| gpios = <&gpio 356 0>; |
| default-state = "off"; |
| }; |
| |
| health_red { |
| gpios = <&gpio 357 0>; |
| default-state = "off"; |
| }; |
| |
| health_amber { |
| gpios = <&gpio 358 0>; |
| default-state = "off"; |
| }; |
| }; |
| |
| presence: presence { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <100>; |
| autorepeat; |
| |
| fan1 { |
| label = "fan1 presence"; |
| linux,code = <200>; |
| gpios = <&gpio 308 0>; |
| }; |
| |
| fan2 { |
| label = "fan2 presence"; |
| linux,code = <201>; |
| gpios = <&gpio 309 0>; |
| }; |
| |
| fan3 { |
| label = "fan3 presence"; |
| linux,code = <202>; |
| gpios = <&gpio 310 0>; |
| }; |
| |
| fan4 { |
| label = "fan4 presence"; |
| linux,code = <203>; |
| gpios = <&gpio 311 0>; |
| }; |
| |
| fan5 { |
| label = "fan5 presence"; |
| linux,code = <204>; |
| gpios = <&gpio 312 0>; |
| }; |
| |
| fan6 { |
| label = "fan6 presence"; |
| linux,code = <205>; |
| gpios = <&gpio 313 0>; |
| }; |
| |
| fan7 { |
| label = "fan7 presence"; |
| linux,code = <206>; |
| gpios = <&gpio 314 0>; |
| }; |
| |
| fan8 { |
| label = "fan8 presence"; |
| linux,code = <207>; |
| gpios = <&gpio 315 0>; |
| }; |
| |
| fan9 { |
| label = "fan9 presence"; |
| linux,code = <208>; |
| gpios = <&gpio 316 0>; |
| }; |
| |
| fan10 { |
| label = "fan10 presence"; |
| linux,code = <209>; |
| gpios = <&gpio 317 0>; |
| }; |
| |
| fan11 { |
| label = "fan11 presence"; |
| linux,code = <210>; |
| gpios = <&gpio 318 0>; |
| }; |
| |
| fan12 { |
| label = "fan12 presence"; |
| linux,code = <211>; |
| gpios = <&gpio 319 0>; |
| }; |
| |
| fan13 { |
| label = "fan13 presence"; |
| linux,code = <212>; |
| gpios = <&gpio 320 0>; |
| }; |
| |
| fan14 { |
| label = "fan14 presence"; |
| linux,code = <213>; |
| gpios = <&gpio 321 0>; |
| }; |
| |
| fan15 { |
| label = "fan15 presence"; |
| linux,code = <214>; |
| gpios = <&gpio 322 0>; |
| }; |
| |
| fan16 { |
| label = "fan16 presence"; |
| linux,code = <215>; |
| gpios = <&gpio 323 0>; |
| }; |
| }; |
| |
| vuhc: vuhc { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <100>; |
| |
| PortOwner@0 { |
| label = "Port Owner"; |
| linux,code = <200>; |
| gpios = <&gpio 250 1>; |
| }; |
| |
| PortOwner@1 { |
| label = "Port Owner"; |
| linux,code = <201>; |
| gpios = <&gpio 251 1>; |
| }; |
| }; |
| |
| vuhc0: vuhc@80400080 { |
| compatible = "syscon"; |
| reg = <0x80400000 0x80>; |
| }; |
| |
| udcg: udcg@80400800 { |
| compatible = "syscon"; |
| reg = <0x80400800 0x200>; |
| }; |
| |
| udc0: udc@80401000 { |
| compatible = "hpe, gxp-udc"; |
| reg = <0x80401000 0x1000>; |
| interrupts = <13>; |
| interrupt-parent = <&vic1>; |
| vdevnum = <0>; |
| fepnum = <7>; |
| udcg-handle = <&udcg>; |
| }; |
| |
| udc1: udc@80402000 { |
| compatible = "hpe, gxp-udc"; |
| reg = <0x80402000 0x1000>; |
| interrupts = <13>; |
| interrupt-parent = <&vic1>; |
| vdevnum = <1>; |
| fepnum = <7>; |
| udcg-handle = <&udcg>; |
| }; |
| |
| coretemp: coretemp@c0000130 { |
| compatible = "hpe,gxp-coretemp"; |
| reg = <0xc0000130 0x8>; |
| }; |
| |
| syspower: syspower { |
| compatible = "hpe,gxp-power"; |
| psu_phandle = <&psu1>, <&psu2>; |
| }; |
| }; |
| |
| clocks { |
| osc: osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-output-names = "osc"; |
| clock-frequency = <33333333>; |
| }; |
| |
| iopclk: iopclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clocks = <&osc>; |
| clock-out-put-names = "iopclk"; |
| clock-frequency = <400000000>; |
| }; |
| |
| memclk: memclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clocks = <&osc>; |
| clock-out-put-names = "memclk"; |
| clock-frequency = <800000000>; |
| }; |
| }; |
| }; |