meta-dl360poc/recipes-kernel/linux/linux-obmc/gxp.dts

/dts-v1/;
/ {
  #address-cells = <1>;
  #size-cells = <1>;
  compatible = "HPE,GXP";
  model = "GXP";

  chosen {
    bootargs = "earlyprintk console=ttyS0,115200 user_debug=31";
  };

  aliases {
  };

  memory@40000000 {
    device_type = "memory";
    reg = <0x40000000 0x20000000>;
  };

  ahb@80000000 {
    compatible = "simple-bus";
    #address-cells = <1>;
    #size-cells = <1>;
    ranges;

    vic0: vic@ceff0000 {
      compatible = "arm,pl192-vic";
      interrupt-controller;
      reg = <0xceff0000 0x1000>;
      #interrupt-cells = <1>;
    };

    vic1: vic@80f00000 {
      compatible = "arm,pl192-vic";
      interrupt-controller;
      reg = <0x80f00000 0x1000>;
      #interrupt-cells = <1>;
    };

    timer0: timer@c0000080 {
      compatible = "hpe,gxp-timer";
      reg = <0xc0000080 0x1>, <0xc0000094 0x01>, <0xc0000088 0x08>;
      interrupts = <0>;
      interrupt-parent = <&vic0>;
      clock-frequency = <400000000>;
    };
    
    watchdog: watchdog@c0000090 {
      compatible = "hpe,gxp-wdt";
      reg = <0xc0000090 0x02>, <0xc0000096 0x01>;
    };

    uartc: serial@c00000f0 {
      compatible = "ns16550a";
      reg = <0xc00000f0 0x8>;
      interrupts = <19>;
      interrupt-parent = <&vic0>;
      clock-frequency = <1846153>;
      reg-shift = <0>;
    };

    uarta: serial@c00000e0 {
      compatible = "ns16550a";
      reg = <0xc00000e0 0x8>;
      interrupts = <17>;
      interrupt-parent = <&vic0>;
      clock-frequency = <1846153>;
      reg-shift = <0>;
    };

    uartb: serial@c00000e8 {
      compatible = "ns16550a";
      reg = <0xc00000e8 0x8>;
      interrupts = <18>;
      interrupt-parent = <&vic0>;
      clock-frequency = <1846153>;
      reg-shift = <0>;
    };

    vuart_a_cfg: vuarta_cfg@80fc0230 {
      compatible = "hpe,gxp-vuarta_cfg", "simple-mfd", "syscon";
      reg = <0x80fc0230 0x100>;
      reg-io-width = <1>;
    };
 
    vuart_a: vuart_a@80fd0200 {
      compatible = "hpe,gxp-vuart";
      reg = <0x80fd0200 0x100>;
      interrupts = <2>;
      interrupt-parent = <&vic1>;
      clock-frequency = <1846153>;
      reg-shift = <0>;
      status = "okay";
      serial-line = <3>;
      vuart_cfg = <&vuart_a_cfg>;
    };
 
    spifi0: spifi@c0000200 {
      compatible = "hpe,gxp-spifi";
      reg = <0xc0000200 0x80>, <0xc000c000 0x100>, <0xf8000000 0x8000000>;
      interrupts = <20>;
      interrupt-parent = <&vic0>;
      #address-cells = <1>;
      #size-cells = <0>;

      flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0>;
        partitions {
          compatible = "fixed-partitions";
          #address-cells = <1>;
          #size-cells = <1>;
          
          u-boot@0 {
            label = "u-boot";
            reg = <0x0 0x60000>;
          };
          u-boot-env@60000 {
            label = "u-boot-env";
            reg = <0x60000 0x20000>;
          };
          kernel@80000 {
            label = "kernel";
            reg = <0x80000 0x4c0000>;
          };
          rofs@540000 {
            label = "rofs";
            reg = <0x540000 0x1740000>;
          };
          rwfs@1c80000 {
            label = "rwfs";
            reg = <0x1c80000 0x250000>;
          };
          section@1edf000{
            labele = "section";
            reg = <0x1ed0000 0x130000>;
          };
        };
      };

      flash@1 {
        compatible = "jedec,spi-nor";
        reg = <1>;
        partitions {
          compatible = "fixed-partitions";
          #address-cells = <1>;
          #size-cells = <1>;
          host-prime@0 {
            label = "host-prime";
            reg = <0x0 0x02000000>;
          };
          host-second@0 {
            label = "host-second";
            reg = <0x02000000 0x02000000>;
          };
        };
      };
    };

    sram@d0000000 {
      compatible = "mtd-ram";
      reg = <0xd0000000 0x80000>;
      bank-width = <1>;
      erase-size =<1>;
      partition@0 {
        label = "host-reserved";
        reg = <0x0 0x10000>;
      };
      partition@10000 {
        label = "nvram";
        reg = <0x10000 0x70000>;
      };
    };

    srom@80fc0000 {
      compatible = "hpe,gxp-srom", "simple-mfd", "syscon";
      reg = <0x80fc0000 0x100>;
    };

    vrom@58000000 {
      compatible = "mtd-ram";
      bank-width = <4>;
      reg = <0x58000000 0x4000000>;
      #address-cells = <1>;
      #size-cells = <1>;
      partition@0 {
        label = "vrom-prime";
        reg = <0x0 0x2000000>;
      };
      partition@2000000 {
        label = "vrom-second";
        reg = <0x2000000 0x2000000>;
      };
    };

    i2cg: i2cg@c00000f8 {
      compatible = "syscon";
      reg = <0xc00000f8 0x08>;
    };
    
    i2c0: i2c@c0002000 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002000 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;
    };

    i2c1: i2c@c0002100 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002100 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;
    };

    i2c2: i2c@c0002200 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002200 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;

      at24c02@50 {
        compatible = "at24,24c02";
        pagesize = <8>;
        reg = <0x50>;
      };
    };

    i2c3: i2c@c0002300 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002300 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;
    };

    i2c4: i2c@c0002400 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002400 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;
    };

    i2c5: i2c@c0002500 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002500 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;

      emc1402@4c {
        compatible = "emc1402";
        reg = <0x4c>;
      };
      
      emc1404@1c {
        compatible = "emc1404";
        reg = <0x1c>;
      };
    };

    i2c6: i2c@c0002600 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002600 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;
    };

    i2c7: i2c@c0002700 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002700 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;

      psu1: psu@58 {
        compatible = "hpe,gxp-psu";
        reg = <0x58>;
      };

      psu2: psu@59 {
        compatible = "hpe,gxp-psu";
        reg = <0x59>;
      };
    };

    i2c8: i2c@c0002800 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002800 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;
    };

    i2c9: i2c@c0002900 {
      compatible = "hpe,gxp-i2c";
      reg = <0xc0002900 0x70>;
      interrupts = <9>;
      interrupt-parent = <&vic0>;
      i2cg-handle = <&i2cg>;
      #address-cells = <1>;
      #size-cells = <0>;
    };

    i2cmux@4 {
      compatible = "i2c-mux-reg";
      i2c-parent = <&i2c4>;
      reg = <0xd1000374 1>;
      #address-cells = <1>;
      #size-cells = <0>;

      i2c4@1 {
        reg = <1>;
        #address-cells = <1>;
        #size-cells = <0>;
      };

      i2c4@3 {
        reg = <3>;
        #address-cells = <1>;
        #size-cells = <0>;
      };

      i2c4@4 {
        reg = <4>;
        #address-cells = <1>;
        #size-cells = <0>;
      };
    };

    i2cmux@6 {
      compatible = "i2c-mux-reg";
      i2c-parent = <&i2c6>;
      reg = <0xd1000376 1>;
      #address-cells = <1>;
      #size-cells = <0>;

      i2c6@1 {
        reg = <1>;
        #address-cells = <1>;
        #size-cells = <0>;
      };

      i2c6@2 {
        reg = <2>;
        #address-cells = <1>;
        #size-cells = <0>;
      };

      i2c6@3 {
        reg = <3>;
        #address-cells = <1>;
        #size-cells = <0>;
      };

      i2c6@4 {
        reg = <4>;
        #address-cells = <1>;
        #size-cells = <0>;
      };

      i2c6@5 {
        reg = <5>;
        #address-cells = <1>;
        #size-cells = <0>;
      };
    };

    mdio0: mdio@c0004080 {
      compatible = "hpe,gxp-umac-mdio";
      reg = <0xc0004080 0x10>;
      #address-cells = <1>;
      #size-cells = <0>;
      ext_phy0: ethernt-phy@0 {
        compatible = "marvell,88e1415","ethernet-phy-ieee802.3-c22";
        phy-mode = "sgmii";
        reg = <0>;
      };
    };

    mdio1: mdio@c0005080 {
      compatible = "hpe,gxp-umac-mdio";
      reg = <0xc0005080 0x10>;
      #address-cells = <1>;
      #size-cells = <0>;
      int_phy0: ethernt-phy@0 {
        compatible = "ethernet-phy-ieee802.3-c22";
        phy-mode = "gmii";
        reg = <0>;
      };
      int_phy1: ethernt-phy@1 {
        compatible = "ethernet-phy-ieee802.3-c22";
        phy-mode = "gmii";
        reg = <1>;
      };
    };

    umac0: umac@c0004000 {
      compatible = "hpe, gxp-umac";
      reg = <0xc0004000 0x80>;
      interrupts = <10>;
      interrupt-parent = <&vic0>;
      mac-address = [94 18 82 16 04 d8];
      phy-handle = <&ext_phy0>;
      int-phy-handle = <&int_phy0>;
    };

    umac1: umac@c0005000 {
      compatible = "hpe, gxp-umac";
      use-ncsi;
      reg = <0xc0005000 0x80>;
      interrupts = <11>;
      interrupt-parent = <&vic0>;
      mac-address = [94 18 82 16 04 d9];
      phy-handle = <&int_phy1>;
    };

    kcs_conf: kcs_conf@80fc0430 {
      compatible = "hpe,gxp-kcs-bmc-cfg", "simple-mfd", "syscon";
      reg = <0x80fc0430 0x100>;
    };
  
    kcs_reg: kcs_reg@080fd0400 {
      compatible = "hpe,gxp-kcs-bmc";
      reg = <0x80fd0400 0x8>;
      interrupts = <6>;
      interrupt-parent = <&vic1>;
      kcs_chan = <1>;
      status = "okay";
      kcs-bmc-cfg = <&kcs_conf>;
    };

    thumbnail: thumbnail@c0000500 {
      compatible = "hpe,gxp-thumbnail";
      reg = <0xc0000500 0x20>;
      bits-per-pixel = <32>;
      width = <800>;
      height = <600>;
    };

    xreg: xreg@d1000000 {
      compatible = "hpe,gxp-xreg", "simple-mfd", "syscon";
      reg = <0xd1000300 0xFF>;
    };

    fanctrl: fanctrl@c1000c00 {
      compatible = "hpe,gxp-fan-ctrl";
      reg = <0xc1000c00 0x200>;
      xreg_handle = <&xreg>;
      fn2_handle = <&fn2>;
    };

    fn2: fn2@80200000 {
      compatible = "hpe,gxp-fn2", "simple-mfd", "syscon";
      reg = <0x80200000 0x100000>;
      interrupts = <0>;
      interrupt-parent = <&vic1>;
    };

    csm: csm@80000000 {
      compatible = "hpe,gxp-csm", "simple-mfd", "syscon";
      reg = <0x80000000 0x100000>;
    };

    gpio: gpio {
      compatible = "hpe,gxp-gpio";
      #gpio-cells = <2>;
      csm_handle = <&csm>;
      fn2_handle = <&fn2>;
      xreg_handle = <&xreg>;
      vuhc0_handle = <&vuhc0>;
      interrupts = <26>;
      interrupt-parent = <&vic0>;
    };

    leds: leds {
      compatible = "gpio-leds";

      power {
        gpios = <&gpio 306 0>;
        default-state = "off";
      };

      heartbeat {
        gpios = <&gpio 307 0>;
        default-state = "off";
      };

      identify {
        gpios = <&gpio 356 0>;
        default-state = "off";
      };

      health_red {
        gpios = <&gpio 357 0>;
        default-state = "off";
      };

      health_amber {
        gpios = <&gpio 358 0>;
        default-state = "off";
      };
    };

    presence: presence {
      compatible = "gpio-keys-polled";
      poll-interval = <100>;
      autorepeat;

      fan1 {
        label = "fan1 presence";
        linux,code = <200>;
        gpios = <&gpio 308 0>;
      };

      fan2 {
        label = "fan2 presence";
        linux,code = <201>;
        gpios = <&gpio 309 0>;
      };

      fan3 {
        label = "fan3 presence";
        linux,code = <202>;
        gpios = <&gpio 310 0>;
      };

      fan4 {
        label = "fan4 presence";
        linux,code = <203>;
        gpios = <&gpio 311 0>;
      };

      fan5 {
        label = "fan5 presence";
        linux,code = <204>;
        gpios = <&gpio 312 0>;
      };

      fan6 {
        label = "fan6 presence";
        linux,code = <205>;
        gpios = <&gpio 313 0>;
      };

      fan7 {
        label = "fan7 presence";
        linux,code = <206>;
        gpios = <&gpio 314 0>;
      };

      fan8 {
        label = "fan8 presence";
        linux,code = <207>;
        gpios = <&gpio 315 0>;
      };

      fan9 {
        label = "fan9 presence";
        linux,code = <208>;
        gpios = <&gpio 316 0>;
      };

      fan10 {
        label = "fan10 presence";
        linux,code = <209>;
        gpios = <&gpio 317 0>;
      };

      fan11 {
        label = "fan11 presence";
        linux,code = <210>;
        gpios = <&gpio 318 0>;
      };

      fan12 {
        label = "fan12 presence";
        linux,code = <211>;
        gpios = <&gpio 319 0>;
      };

      fan13 {
        label = "fan13 presence";
        linux,code = <212>;
        gpios = <&gpio 320 0>;
      };

      fan14 {
        label = "fan14 presence";
        linux,code = <213>;
        gpios = <&gpio 321 0>;
      };

      fan15 {
        label = "fan15 presence";
        linux,code = <214>;
        gpios = <&gpio 322 0>;
      };

      fan16 {
        label = "fan16 presence";
        linux,code = <215>;
        gpios = <&gpio 323 0>;
      };
    };

    vuhc: vuhc {
      compatible = "gpio-keys-polled";
      poll-interval = <100>;

      PortOwner@0 {
        label = "Port Owner";
        linux,code = <200>;
        gpios = <&gpio 250 1>;
      };

      PortOwner@1 {
        label = "Port Owner";
        linux,code = <201>;
        gpios = <&gpio 251 1>;
      };
    };

    vuhc0: vuhc@80400080 {
      compatible = "syscon";
      reg = <0x80400000 0x80>;
    };

    udcg: udcg@80400800 {
      compatible = "syscon";
      reg = <0x80400800 0x200>;
    };

    udc0: udc@80401000 {
      compatible = "hpe, gxp-udc";
      reg = <0x80401000 0x1000>;
      interrupts = <13>;
      interrupt-parent = <&vic1>;
      vdevnum = <0>;
      fepnum = <7>;
      udcg-handle = <&udcg>;
    };

    udc1: udc@80402000 {
      compatible = "hpe, gxp-udc";
      reg = <0x80402000 0x1000>;
      interrupts = <13>;
      interrupt-parent = <&vic1>;
      vdevnum = <1>;
      fepnum = <7>;
      udcg-handle = <&udcg>;
    };

    coretemp: coretemp@c0000130 {
      compatible = "hpe,gxp-coretemp";
      reg = <0xc0000130 0x8>;
    };

    syspower: syspower {
      compatible = "hpe,gxp-power";
      psu_phandle = <&psu1>, <&psu2>;
    };
  };

  clocks {
    osc: osc {
      compatible = "fixed-clock";
      #clock-cells = <0>;
      clock-output-names = "osc";
      clock-frequency = <33333333>;
    };

    iopclk: iopclk {
      compatible = "fixed-clock";
      #clock-cells = <0>;
      clocks = <&osc>;
      clock-out-put-names = "iopclk";
      clock-frequency = <400000000>;
    };

    memclk: memclk {
      compatible = "fixed-clock";
      #clock-cells = <0>;
      clocks = <&osc>;
      clock-out-put-names = "memclk";
      clock-frequency = <800000000>;
    };
  };
};