Xo Wang | 61a1001 | 2016-12-15 18:29:58 -0800 | [diff] [blame] | 1 | #!/bin/sh -e |
| 2 | # AVSBus control for PMBUS voltage regulator modules (VRMs) |
| 3 | # Switches output voltage target between |
| 4 | # - VOUT_COMMAND register (AVSBus disabled, default on Zaius) |
| 5 | # - AVSBus target output (AVSBus enabled, voltage set by host) |
| 6 | |
| 7 | cpu0_i2c_bus="7" |
| 8 | cpu1_i2c_bus="8" |
| 9 | busses="$cpu0_i2c_bus $cpu1_i2c_bus" |
| 10 | vdd_i2c_addr_page="0x60:0x01" |
| 11 | vdn_i2c_addr_page="0x64:0x01" |
| 12 | vcs_i2c_addr_page="0x64:0x00" |
| 13 | addrs_pages="$vdd_i2c_addr_page $vdn_i2c_addr_page $vcs_i2c_addr_page" |
| 14 | |
| 15 | # Usage: vrm_set_page <bus> <i2c_address> <page> |
| 16 | vrm_set_page() |
| 17 | { |
| 18 | i2cset -y $1 $2 0x00 $3 b |
| 19 | } |
| 20 | |
| 21 | # Usage: vrm_avs_enable <bus> <i2c_address> <page> |
| 22 | # Sets OPERATION PMBUS register to |
| 23 | # - Enable/Disable: On |
| 24 | # - VOUT Source: AVSBus Target Rail Voltage |
| 25 | # - AVSBus Copy: VOUT_COMMAND remains unchanged |
| 26 | vrm_avs_enable() |
| 27 | { |
| 28 | vrm_set_page "$@" |
| 29 | echo Enabling AVSBus on bus $1 VRM @$2 rail $3... |
| 30 | i2cset -y $1 $2 0x01 0xb0 b |
| 31 | } |
| 32 | |
| 33 | # Usage: vrm_avs_disable <bus> <i2c_address> <page> |
| 34 | # Sets OPERATION PMBUS register to |
| 35 | # - Enable/Disable: On |
| 36 | # - VOUT Source: VOUT_COMMAND |
| 37 | # - AVSBus Copy: VOUT_COMMAND remains unchanged |
| 38 | vrm_avs_disable() |
| 39 | { |
| 40 | vrm_set_page "$@" |
| 41 | echo Disabling AVSBus on bus $1 VRM @$2 rail $3... |
| 42 | i2cset -y $1 $2 0x01 0x80 b |
| 43 | } |
| 44 | |
| 45 | # Usage: vrm_print <bus> <i2c_address> <page> |
| 46 | vrm_print() |
| 47 | { |
| 48 | vrm_set_page "$@" |
| 49 | local operation=`i2cget -y $1 $2 0x01 b` |
| 50 | local vout=`i2cget -y $1 $2 0x8b w` |
| 51 | local iout=`i2cget -y $1 $2 0x8c w` |
| 52 | echo VRM on bus $1 @$2 rail $3: OPERATION=$operation VOUT=$vout IOUT=$iout |
| 53 | } |
| 54 | |
| 55 | # Usage: for_each_rail <command> |
| 56 | # <command> will be invoked with <bus> <i2c_address> <page> |
| 57 | for_each_rail() |
| 58 | { |
| 59 | for bus in $busses |
| 60 | do |
| 61 | for addr_page in $addrs_pages |
| 62 | do |
| 63 | $1 $bus `echo $addr_page | tr : " "` |
| 64 | done |
| 65 | done |
| 66 | } |
| 67 | |
| 68 | if [ "$1" == "enable" ] |
| 69 | then |
| 70 | for_each_rail vrm_avs_enable |
| 71 | elif [ "$1" == "disable" ] |
| 72 | then |
| 73 | for_each_rail vrm_avs_disable |
| 74 | else |
| 75 | for_each_rail vrm_print |
| 76 | echo "\"$0 <enable|disable>\" to control whether VRMs use AVSBus" |
| 77 | fi |