meta-zaius/recipes-bsp/u-boot/u-boot-aspeed/0001-board-aspeed-Add-reset_phy-for-Zaius.patch

From 3cd9aa92ab8ddd230cf6a9a68a27a18705b6f57c Mon Sep 17 00:00:00 2001
From: Xo Wang <xow@google.com>
Date: Thu, 20 Oct 2016 16:26:29 -0700
Subject: [PATCH 1/2] board/aspeed: Add reset_phy() for Zaius

The Broadcom PHY for the Zaius BMC requires a hard reset after RGMII
clocks are enabled. Add reset_phy() implementation and configure it to
be called.

Signed-off-by: Xo Wang <xow@google.com>
---
 board/aspeed/ast-g5/ast-g5.c | 19 +++++++++++++++++++
 include/configs/ast-common.h |  3 +++
 2 files changed, 22 insertions(+)

diff --git a/board/aspeed/ast-g5/ast-g5.c b/board/aspeed/ast-g5/ast-g5.c
index da79d7b..433ad18 100644
--- a/board/aspeed/ast-g5/ast-g5.c
+++ b/board/aspeed/ast-g5/ast-g5.c
@@ -33,6 +33,25 @@ int dram_init(void)
 	return 0;
 }
 
+void reset_phy(void)
+{
+	unsigned long reg;
+	/* D3 in GPIOA/B/C/D direction and data registers */
+	unsigned long phy_reset_mask = BIT(27);
+
+	/* Assert MAC2 PHY hardware reset */
+	/* Set pin low */
+	reg = readl(AST_GPIO_BASE | 0x00);
+	writel(reg & ~phy_reset_mask, AST_GPIO_BASE | 0x00);
+	/* Enable pin for output */
+	reg = readl(AST_GPIO_BASE | 0x04);
+	writel(reg | phy_reset_mask, AST_GPIO_BASE | 0x04);
+	udelay(3);
+	/* Set pin high */
+	reg = readl(AST_GPIO_BASE | 0x00);
+	writel(reg | phy_reset_mask, AST_GPIO_BASE | 0x00);
+}
+
 #ifdef CONFIG_FTGMAC100
 int board_eth_init(bd_t *bd)
 {
diff --git a/include/configs/ast-common.h b/include/configs/ast-common.h
index b39ea33..3566f73 100644
--- a/include/configs/ast-common.h
+++ b/include/configs/ast-common.h
@@ -104,4 +104,7 @@
 	"spi_dma=yes\0" \
 	""
 
+/* Call reset_phy() */
+#define CONFIG_RESET_PHY_R	1
+
 #endif	/* __AST_COMMON_CONFIG_H */
-- 
2.8.0.rc3.226.g39d4020