| From patchwork Fri May 12 19:38:19 2017 |
| Content-Type: text/plain; charset="utf-8" |
| MIME-Version: 1.0 |
| Content-Transfer-Encoding: 7bit |
| Subject: [linux,dev-4.10,2/3] drivers: fsi: sbefifo: Add OCC driver |
| From: eajames@linux.vnet.ibm.com |
| X-Patchwork-Id: 761838 |
| Message-Id: <1494617900-32369-3-git-send-email-eajames@linux.vnet.ibm.com> |
| To: openbmc@lists.ozlabs.org |
| Cc: "Edward A. James" <eajames@us.ibm.com>, bradleyb@fuzziesquirrel.com, |
| cbostic@linux.vnet.ibm.com |
| Date: Fri, 12 May 2017 14:38:19 -0500 |
| |
| From: "Edward A. James" <eajames@us.ibm.com> |
| |
| This driver provides an atomic communications channel between the OCC on |
| the POWER9 processor and a service processor (a BMC). The driver is |
| dependent on the FSI SBEIFO driver to get hardware access to the OCC |
| SRAM. |
| |
| The format of the communication is a command followed by a response. |
| Since the command and response must be performed atomically, the driver |
| will perform this operations asynchronously. In this way, a write |
| operation starts the command, and a read will gather the response data |
| once it is complete. |
| |
| Signed-off-by: Edward A. James <eajames@us.ibm.com> |
| --- |
| drivers/fsi/Kconfig | 9 + |
| drivers/fsi/Makefile | 1 + |
| drivers/fsi/occ.c | 625 +++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 3 files changed, 635 insertions(+) |
| create mode 100644 drivers/fsi/occ.c |
| |
| diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig |
| index 39527fa..f3d8593 100644 |
| --- a/drivers/fsi/Kconfig |
| +++ b/drivers/fsi/Kconfig |
| @@ -36,6 +36,15 @@ config FSI_SBEFIFO |
| ---help--- |
| This option enables an FSI based SBEFIFO device driver. |
| |
| +if FSI_SBEFIFO |
| + |
| +config OCCFIFO |
| + tristate "OCC SBEFIFO client device driver" |
| + ---help--- |
| + This option enables an SBEFIFO based OCC device driver. |
| + |
| +endif |
| + |
| endif |
| |
| endmenu |
| diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile |
| index 851182e..336d9d5 100644 |
| --- a/drivers/fsi/Makefile |
| +++ b/drivers/fsi/Makefile |
| @@ -4,3 +4,4 @@ obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o |
| obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o |
| obj-$(CONFIG_FSI_SCOM) += fsi-scom.o |
| obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o |
| +obj-$(CONFIG_OCCFIFO) += occ.o |
| diff --git a/drivers/fsi/occ.c b/drivers/fsi/occ.c |
| new file mode 100644 |
| index 0000000..74272c8 |
| --- /dev/null |
| +++ b/drivers/fsi/occ.c |
| @@ -0,0 +1,625 @@ |
| +/* |
| + * Copyright 2017 IBM Corp. |
| + * |
| + * This program is free software; you can redistribute it and/or modify |
| + * it under the terms of the GNU General Public License as published by |
| + * the Free Software Foundation; either version 2 of the License, or |
| + * (at your option) any later version. |
| + */ |
| + |
| +#include <asm/unaligned.h> |
| +#include <linux/device.h> |
| +#include <linux/err.h> |
| +#include <linux/fsi-sbefifo.h> |
| +#include <linux/init.h> |
| +#include <linux/kernel.h> |
| +#include <linux/miscdevice.h> |
| +#include <linux/module.h> |
| +#include <linux/of.h> |
| +#include <linux/platform_device.h> |
| +#include <linux/slab.h> |
| +#include <linux/uaccess.h> |
| +#include <linux/wait.h> |
| +#include <linux/workqueue.h> |
| + |
| +#define OCC_SRAM_BYTES 4096 |
| +#define OCC_CMD_DATA_BYTES 4090 |
| +#define OCC_RESP_DATA_BYTES 4089 |
| + |
| +struct occ { |
| + struct device *sbefifo; |
| + char name[32]; |
| + int idx; |
| + struct miscdevice mdev; |
| + struct list_head xfrs; |
| + spinlock_t list_lock; |
| + spinlock_t occ_lock; |
| + struct work_struct work; |
| +}; |
| + |
| +#define to_occ(x) container_of((x), struct occ, mdev) |
| + |
| +struct occ_command { |
| + u8 seq_no; |
| + u8 cmd_type; |
| + u16 data_length; |
| + u8 data[OCC_CMD_DATA_BYTES]; |
| + u16 checksum; |
| +}; |
| + |
| +struct occ_response { |
| + u8 seq_no; |
| + u8 cmd_type; |
| + u8 return_status; |
| + u16 data_length; |
| + u8 data[OCC_RESP_DATA_BYTES]; |
| + u16 checksum; |
| +}; |
| + |
| +struct occ_xfr; |
| + |
| +enum { |
| + CLIENT_NONBLOCKING, |
| +}; |
| + |
| +struct occ_client { |
| + struct occ *occ; |
| + struct occ_xfr *xfr; |
| + spinlock_t lock; |
| + wait_queue_head_t wait; |
| + size_t read_offset; |
| + unsigned long flags; |
| +}; |
| + |
| +enum { |
| + XFR_IN_PROGRESS, |
| + XFR_COMPLETE, |
| + XFR_CANCELED, |
| + XFR_WAITING, |
| +}; |
| + |
| +struct occ_xfr { |
| + struct list_head link; |
| + struct occ_client *client; |
| + int rc; |
| + u8 buf[OCC_SRAM_BYTES]; |
| + size_t cmd_data_length; |
| + size_t resp_data_length; |
| + unsigned long flags; |
| +}; |
| + |
| +static struct workqueue_struct *occ_wq; |
| + |
| +static DEFINE_IDA(occ_ida); |
| + |
| +static void occ_enqueue_xfr(struct occ_xfr *xfr) |
| +{ |
| + int empty; |
| + struct occ *occ = xfr->client->occ; |
| + |
| + spin_lock_irq(&occ->list_lock); |
| + empty = list_empty(&occ->xfrs); |
| + list_add_tail(&xfr->link, &occ->xfrs); |
| + spin_unlock(&occ->list_lock); |
| + |
| + if (empty) |
| + queue_work(occ_wq, &occ->work); |
| +} |
| + |
| +static int occ_open(struct inode *inode, struct file *file) |
| +{ |
| + struct occ_client *client; |
| + struct miscdevice *mdev = file->private_data; |
| + struct occ *occ = to_occ(mdev); |
| + |
| + client = kzalloc(sizeof(*client), GFP_KERNEL); |
| + if (!client) |
| + return -ENOMEM; |
| + |
| + client->occ = occ; |
| + spin_lock_init(&client->lock); |
| + init_waitqueue_head(&client->wait); |
| + |
| + if (file->f_flags & O_NONBLOCK) |
| + set_bit(CLIENT_NONBLOCKING, &client->flags); |
| + |
| + file->private_data = client; |
| + |
| + return 0; |
| +} |
| + |
| +static ssize_t occ_read(struct file *file, char __user *buf, size_t len, |
| + loff_t *offset) |
| +{ |
| + int rc; |
| + size_t bytes; |
| + struct occ_xfr *xfr; |
| + struct occ_client *client = file->private_data; |
| + |
| + if (!access_ok(VERIFY_WRITE, buf, len)) |
| + return -EFAULT; |
| + |
| + if (len > OCC_SRAM_BYTES) |
| + return -EINVAL; |
| + |
| + spin_lock_irq(&client->lock); |
| + if (!client->xfr) { |
| + /* we just finished reading all data, return 0 */ |
| + if (client->read_offset) { |
| + rc = 0; |
| + client->read_offset = 0; |
| + } else |
| + rc = -ENOMSG; |
| + |
| + goto done; |
| + } |
| + |
| + xfr = client->xfr; |
| + |
| + if (!test_bit(XFR_COMPLETE, &xfr->flags)) { |
| + if (client->flags & CLIENT_NONBLOCKING) { |
| + rc = -ERESTARTSYS; |
| + goto done; |
| + } |
| + |
| + set_bit(XFR_WAITING, &xfr->flags); |
| + spin_unlock(&client->lock); |
| + |
| + rc = wait_event_interruptible(client->wait, |
| + test_bit(XFR_COMPLETE, &xfr->flags) || |
| + test_bit(XFR_CANCELED, &xfr->flags)); |
| + |
| + spin_lock_irq(&client->lock); |
| + if (test_bit(XFR_CANCELED, &xfr->flags)) { |
| + kfree(xfr); |
| + spin_unlock(&client->lock); |
| + kfree(client); |
| + return -EBADFD; |
| + } |
| + |
| + clear_bit(XFR_WAITING, &xfr->flags); |
| + if (!test_bit(XFR_COMPLETE, &xfr->flags)) { |
| + rc = -EINTR; |
| + goto done; |
| + } |
| + } |
| + |
| + if (xfr->rc) { |
| + rc = xfr->rc; |
| + goto done; |
| + } |
| + |
| + bytes = min(len, xfr->resp_data_length - client->read_offset); |
| + if (copy_to_user(buf, &xfr->buf[client->read_offset], bytes)) { |
| + rc = -EFAULT; |
| + goto done; |
| + } |
| + |
| + client->read_offset += bytes; |
| + |
| + /* xfr done */ |
| + if (client->read_offset == xfr->resp_data_length) { |
| + kfree(xfr); |
| + client->xfr = NULL; |
| + } |
| + |
| + rc = bytes; |
| + |
| +done: |
| + spin_unlock(&client->lock); |
| + return rc; |
| +} |
| + |
| +static ssize_t occ_write(struct file *file, const char __user *buf, |
| + size_t len, loff_t *offset) |
| +{ |
| + int rc; |
| + struct occ_xfr *xfr; |
| + struct occ_client *client = file->private_data; |
| + |
| + if (!access_ok(VERIFY_READ, buf, len)) |
| + return -EFAULT; |
| + |
| + if (len > OCC_SRAM_BYTES) |
| + return -EINVAL; |
| + |
| + spin_lock_irq(&client->lock); |
| + if (client->xfr) { |
| + rc = -EDEADLK; |
| + goto done; |
| + } |
| + |
| + xfr = kzalloc(sizeof(*xfr), GFP_KERNEL); |
| + if (!xfr) { |
| + rc = -ENOMEM; |
| + goto done; |
| + } |
| + |
| + if (copy_from_user(xfr->buf, buf, len)) { |
| + kfree(xfr); |
| + rc = -EFAULT; |
| + goto done; |
| + } |
| + |
| + xfr->client = client; |
| + xfr->cmd_data_length = len; |
| + client->xfr = xfr; |
| + client->read_offset = 0; |
| + |
| + occ_enqueue_xfr(xfr); |
| + |
| + rc = len; |
| + |
| +done: |
| + spin_unlock(&client->lock); |
| + return rc; |
| +} |
| + |
| +static int occ_release(struct inode *inode, struct file *file) |
| +{ |
| + struct occ_xfr *xfr; |
| + struct occ_client *client = file->private_data; |
| + struct occ *occ = client->occ; |
| + |
| + spin_lock_irq(&client->lock); |
| + xfr = client->xfr; |
| + if (!xfr) { |
| + spin_unlock(&client->lock); |
| + kfree(client); |
| + return 0; |
| + } |
| + |
| + spin_lock_irq(&occ->list_lock); |
| + set_bit(XFR_CANCELED, &xfr->flags); |
| + if (!test_bit(XFR_IN_PROGRESS, &xfr->flags)) { |
| + /* already deleted from list if complete */ |
| + if (!test_bit(XFR_COMPLETE, &xfr->flags)) |
| + list_del(&xfr->link); |
| + |
| + spin_unlock(&occ->list_lock); |
| + |
| + if (test_bit(XFR_WAITING, &xfr->flags)) { |
| + /* blocking read; let reader clean up */ |
| + wake_up_interruptible(&client->wait); |
| + spin_unlock(&client->lock); |
| + return 0; |
| + } |
| + |
| + kfree(xfr); |
| + spin_unlock(&client->lock); |
| + kfree(client); |
| + return 0; |
| + } |
| + |
| + /* operation is in progress; let worker clean up*/ |
| + spin_unlock(&occ->list_lock); |
| + spin_unlock(&client->lock); |
| + return 0; |
| +} |
| + |
| +static const struct file_operations occ_fops = { |
| + .owner = THIS_MODULE, |
| + .open = occ_open, |
| + .read = occ_read, |
| + .write = occ_write, |
| + .release = occ_release, |
| +}; |
| + |
| +static int occ_getscom(struct device *sbefifo, u32 address, u8 *data) |
| +{ |
| + int rc; |
| + u32 buf[4]; |
| + struct sbefifo_client *client; |
| + const size_t len = sizeof(buf); |
| + |
| + buf[0] = cpu_to_be32(0x4); |
| + buf[1] = cpu_to_be32(0xa201); |
| + buf[2] = 0; |
| + buf[3] = cpu_to_be32(address); |
| + |
| + client = sbefifo_drv_open(sbefifo, 0); |
| + if (!client) |
| + return -ENODEV; |
| + |
| + rc = sbefifo_drv_write(client, (const char *)buf, len); |
| + if (rc < 0) |
| + goto done; |
| + else if (rc != len) { |
| + rc = -EMSGSIZE; |
| + goto done; |
| + } |
| + |
| + rc = sbefifo_drv_read(client, (char *)buf, len); |
| + if (rc < 0) |
| + goto done; |
| + else if (rc != len) { |
| + rc = -EMSGSIZE; |
| + goto done; |
| + } |
| + |
| + /* check for good response */ |
| + if ((be32_to_cpu(buf[2]) >> 16) != 0xC0DE) { |
| + rc = -EFAULT; |
| + goto done; |
| + } |
| + |
| + rc = 0; |
| + |
| + memcpy(data, buf, sizeof(u64)); |
| + |
| +done: |
| + sbefifo_drv_release(client); |
| + return rc; |
| +} |
| + |
| +static int occ_putscom(struct device *sbefifo, u32 address, u8 *data) |
| +{ |
| + int rc; |
| + u32 buf[6]; |
| + struct sbefifo_client *client; |
| + const size_t len = sizeof(buf); |
| + |
| + buf[0] = cpu_to_be32(0x6); |
| + buf[1] = cpu_to_be32(0xa202); |
| + buf[2] = 0; |
| + buf[3] = cpu_to_be32(address); |
| + memcpy(&buf[4], data, sizeof(u64)); |
| + |
| + client = sbefifo_drv_open(sbefifo, 0); |
| + if (!client) |
| + return -ENODEV; |
| + |
| + rc = sbefifo_drv_write(client, (const char *)buf, len); |
| + if (rc < 0) |
| + goto done; |
| + else if (rc != len) { |
| + rc = -EMSGSIZE; |
| + goto done; |
| + } |
| + |
| + rc = 0; |
| + |
| + /* ignore response */ |
| + sbefifo_drv_read(client, (char *)buf, len); |
| + |
| +done: |
| + sbefifo_drv_release(client); |
| + return rc; |
| +} |
| + |
| +static int occ_putscom_u32(struct device *sbefifo, u32 address, u32 data0, |
| + u32 data1) |
| +{ |
| + u8 buf[8]; |
| + u32 raw_data0 = cpu_to_be32(data0), raw_data1 = cpu_to_be32(data1); |
| + |
| + memcpy(buf, &raw_data0, 4); |
| + memcpy(buf + 4, &raw_data1, 4); |
| + |
| + return occ_putscom(sbefifo, address, buf); |
| +} |
| + |
| +static void occ_worker(struct work_struct *work) |
| +{ |
| + int i, empty, canceled, waiting, rc; |
| + u16 resp_data_length; |
| + struct occ *occ = container_of(work, struct occ, work); |
| + struct device *sbefifo = occ->sbefifo; |
| + struct occ_client *client; |
| + struct occ_xfr *xfr; |
| + struct occ_response *resp; |
| + |
| +again: |
| + spin_lock_irq(&occ->list_lock); |
| + xfr = list_first_entry(&occ->xfrs, struct occ_xfr, link); |
| + if (!xfr) { |
| + spin_unlock(&occ->list_lock); |
| + return; |
| + } |
| + |
| + set_bit(XFR_IN_PROGRESS, &xfr->flags); |
| + spin_unlock(&occ->list_lock); |
| + |
| + resp = (struct occ_response *)xfr->buf; |
| + |
| + spin_lock_irq(&occ->occ_lock); |
| + |
| + /* set address reg to occ sram command buffer */ |
| + rc = occ_putscom_u32(sbefifo, 0x6D050, 0xFFFBE000, 0); |
| + if (rc) |
| + goto done; |
| + |
| + /* write cmd data */ |
| + for (i = 0; i < xfr->cmd_data_length; i += 8) { |
| + rc = occ_putscom(sbefifo, 0x6D055, &xfr->buf[i]); |
| + if (rc) |
| + goto done; |
| + } |
| + |
| + /* trigger attention */ |
| + rc = occ_putscom_u32(sbefifo, 0x6D035, 0x20010000, 0); |
| + if (rc) |
| + goto done; |
| + |
| + /* set address reg to occ sram response buffer */ |
| + rc = occ_putscom_u32(sbefifo, 0x6D050, 0xFFFBF000, 0); |
| + if (rc) |
| + goto done; |
| + |
| + rc = occ_getscom(sbefifo, 0x6D055, xfr->buf); |
| + if (rc) |
| + goto done; |
| + |
| + xfr->resp_data_length += 8; |
| + |
| + resp_data_length = be16_to_cpu(get_unaligned(&resp->data_length)); |
| + if (resp_data_length > OCC_RESP_DATA_BYTES) { |
| + rc = -EFAULT; |
| + goto done; |
| + } |
| + |
| + /* already read 3 bytes of resp data, but also need 2 bytes chksum */ |
| + for (i = 8; i < resp_data_length + 7; i += 8) { |
| + rc = occ_getscom(sbefifo, 0x6D055, &xfr->buf[i]); |
| + if (rc) |
| + goto done; |
| + |
| + xfr->resp_data_length += 8; |
| + } |
| + |
| + /* no errors, got all data */ |
| + xfr->resp_data_length = resp_data_length + 7; |
| + |
| +done: |
| + spin_unlock(&occ->occ_lock); |
| + |
| + xfr->rc = rc; |
| + client = xfr->client; |
| + |
| + /* lock client to prevent race with read() */ |
| + spin_lock_irq(&client->lock); |
| + set_bit(XFR_COMPLETE, &xfr->flags); |
| + waiting = test_bit(XFR_WAITING, &xfr->flags); |
| + spin_unlock(&client->lock); |
| + |
| + spin_lock_irq(&occ->list_lock); |
| + clear_bit(XFR_IN_PROGRESS, &xfr->flags); |
| + list_del(&xfr->link); |
| + empty = list_empty(&occ->xfrs); |
| + canceled = test_bit(XFR_CANCELED, &xfr->flags); |
| + spin_unlock(&occ->list_lock); |
| + |
| + if (waiting) |
| + wake_up_interruptible(&client->wait); |
| + else if (canceled) { |
| + kfree(xfr); |
| + kfree(xfr->client); |
| + } |
| + |
| + if (!empty) |
| + goto again; |
| +} |
| + |
| +static int occ_probe(struct platform_device *pdev) |
| +{ |
| + int rc; |
| + u32 reg; |
| + struct occ *occ; |
| + struct device *dev = &pdev->dev; |
| + |
| + dev_info(dev, "Found occ device\n"); |
| + occ = devm_kzalloc(dev, sizeof(*occ), GFP_KERNEL); |
| + if (!occ) |
| + return -ENOMEM; |
| + |
| + occ->sbefifo = dev->parent; |
| + INIT_LIST_HEAD(&occ->xfrs); |
| + spin_lock_init(&occ->list_lock); |
| + spin_lock_init(&occ->occ_lock); |
| + INIT_WORK(&occ->work, occ_worker); |
| + |
| + if (dev->of_node) { |
| + rc = of_property_read_u32(dev->of_node, "reg", ®); |
| + if (!rc) { |
| + /* make sure we don't have a duplicate from dts */ |
| + occ->idx = ida_simple_get(&occ_ida, reg, reg + 1, |
| + GFP_KERNEL); |
| + if (occ->idx < 0) |
| + occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX, |
| + GFP_KERNEL); |
| + } else |
| + occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX, |
| + GFP_KERNEL); |
| + } else |
| + occ->idx = ida_simple_get(&occ_ida, 1, INT_MAX, GFP_KERNEL); |
| + |
| + snprintf(occ->name, sizeof(occ->name), "occ%d", occ->idx); |
| + occ->mdev.fops = &occ_fops; |
| + occ->mdev.minor = MISC_DYNAMIC_MINOR; |
| + occ->mdev.name = occ->name; |
| + occ->mdev.parent = dev; |
| + |
| + rc = misc_register(&occ->mdev); |
| + if (rc) { |
| + dev_err(dev, "failed to register miscdevice\n"); |
| + return rc; |
| + } |
| + |
| + platform_set_drvdata(pdev, occ); |
| + |
| + return 0; |
| +} |
| + |
| +static int occ_remove(struct platform_device *pdev) |
| +{ |
| + struct occ_xfr *xfr, *tmp; |
| + struct occ *occ = platform_get_drvdata(pdev); |
| + struct occ_client *client; |
| + |
| + misc_deregister(&occ->mdev); |
| + |
| + spin_lock_irq(&occ->list_lock); |
| + list_for_each_entry_safe(xfr, tmp, &occ->xfrs, link) { |
| + client = xfr->client; |
| + set_bit(XFR_CANCELED, &xfr->flags); |
| + |
| + if (!test_bit(XFR_IN_PROGRESS, &xfr->flags)) { |
| + list_del(&xfr->link); |
| + |
| + spin_lock_irq(&client->lock); |
| + if (test_bit(XFR_WAITING, &xfr->flags)) { |
| + wake_up_interruptible(&client->wait); |
| + spin_unlock(&client->lock); |
| + } else { |
| + kfree(xfr); |
| + spin_unlock(&client->lock); |
| + kfree(client); |
| + } |
| + } |
| + } |
| + spin_unlock(&occ->list_lock); |
| + |
| + flush_work(&occ->work); |
| + |
| + ida_simple_remove(&occ_ida, occ->idx); |
| + |
| + return 0; |
| +} |
| + |
| +static const struct of_device_id occ_match[] = { |
| + { .compatible = "ibm,p9-occ" }, |
| + { }, |
| +}; |
| + |
| +static struct platform_driver occ_driver = { |
| + .driver = { |
| + .name = "occ", |
| + .of_match_table = occ_match, |
| + }, |
| + .probe = occ_probe, |
| + .remove = occ_remove, |
| +}; |
| + |
| +static int occ_init(void) |
| +{ |
| + occ_wq = create_singlethread_workqueue("occ"); |
| + if (!occ_wq) |
| + return -ENOMEM; |
| + |
| + return platform_driver_register(&occ_driver); |
| +} |
| + |
| +static void occ_exit(void) |
| +{ |
| + destroy_workqueue(occ_wq); |
| + |
| + platform_driver_unregister(&occ_driver); |
| +} |
| + |
| +module_init(occ_init); |
| +module_exit(occ_exit); |
| + |
| +MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>"); |
| +MODULE_DESCRIPTION("BMC P9 OCC driver"); |
| +MODULE_LICENSE("GPL"); |
| + |