meta-quanta: gbs: add xml for igps and patch/dts for u-boot
1.XML:
change the SPI speed to 19Mhz
2.U-boot:
dts/pinctrl: add GBS dts/pinctrl support
Nuvoton u-boot srcrev bump adb4ac1af3...6870e66f6b:
https://gerrit.openbmc-project.xyz/c/openbmc/meta-nuvoton/+/34756
3.modify u-boot environment partiions offset for GBS
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I87fbd7d65c2d1c002bdbb9242182e40c91c4ccbe
diff --git a/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/BootBlockAndHeader_GBS.xml b/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/BootBlockAndHeader_GBS.xml
new file mode 100644
index 0000000..3c1e3be
--- /dev/null
+++ b/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/BootBlockAndHeader_GBS.xml
@@ -0,0 +1,276 @@
+<!-- SPDX-License-Identifier: GPL-2.0
+#
+# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
+#
+# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
+#--------------------------------------------------------------------------->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Bin_Ecc_Map>
+ <!-- BMC mandatory fields -->
+ <ImageProperties>
+ <BinSize>0</BinSize> <!-- If 0 the binary size will be calculated by the tool -->
+ <PadValue>0xFF</PadValue> <!-- Byte value to pad the empty areas, default is 0 -->
+ </ImageProperties>
+
+ <BinField>
+ <!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
+ uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
+ <name>StartTag</name> <!-- name of field -->
+ <config>
+ <offset>0</offset>
+ <size>0x8</size>
+ </config>
+ <content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for -->
+ <name>DestAddr</name> <!-- name of field -->
+ <config>
+ <offset>0x140</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0xFFFD5E00</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- BootBlock or u-boot Code size -->
+ <name>CodeSize</name> <!-- name of field -->
+ <config>
+ <offset>0x144</offset>
+ <size>0x4</size>
+ </config>
+ <content format='FileSize'>Poleg_bootblock.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- The BootBlock or u-boot binary file -->
+ <name>Code</name> <!-- name of field -->
+ <config>
+ <offset>0x200</offset>
+ <size format='FileSize'>Poleg_bootblock.bin</size> <!-- size in the header calculated by tool-->
+ </config>
+ <content format='FileContent'>Poleg_bootblock.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
+ <name>FIU0_DRD_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x108</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x0300100B</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines the clock divide ratio from AHB to FIU0 clock -->
+ <name>FIU_Clk_Divider</name> <!-- name of field -->
+ <config>
+ <offset>0x10C</offset>
+ <size>0x1</size>
+ </config>
+ <content format='bytes'>0x0A</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Version (Major.Minor) -->
+ <name>Version</name> <!-- name of field -->
+ <config>
+ <offset>0x148</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x0201</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) -->
+ <name>BOARD_VENDOR</name> <!-- name of field -->
+ <config>
+ <offset>0x14C</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>100</content> <!--Board_manufacturer: Nuvoton-->
+ </BinField>
+ <BinField>
+ <!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) -->
+ <!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. -->
+ <name>BOARD_TYPE</name> <!-- name of field -->
+ <config>
+ <offset>0x150</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x64</content> <!--Board_type: EB-->
+ </BinField>
+
+ <!-- the next two fields are available since version 10.7.0 -->
+ <BinField>
+ <!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 -->
+ <name>MC_FREQ_IN_MHZ</name> <!-- name of field -->
+ <config>
+ <offset>0x11C</offset>
+ <size>0x2</size>
+ </config>
+ <content format='32bit'>800</content>
+ </BinField>
+ <BinField>
+ <!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 -->
+ <name>CPU_FREQ_IN_MHZ</name> <!-- name of field -->
+ <config>
+ <offset>0x154</offset>
+ <size>0x2</size>
+ </config>
+ <content format='32bit'>800</content>
+ </BinField>
+
+ <BinField>
+ <!-- MC_CONFIG.
+ Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01)
+ Bit 1: MC_CAPABILITY_IGNORE_ECC_DEVICE (0x02) -->
+ <name>MC_CONFIG</name> <!-- name of field -->
+ <config>
+ <offset>0x156</offset>
+ <size>0x1</size>
+ </config>
+ <content format='32bit'>0x01</content>
+ </BinField>
+
+ <BinField>
+ <!-- HOST_IF.
+ 0xFF: LPC backward compatible
+ 0x00: LPC.
+ 0x01: eSPI
+ 0x02: GPIOs TRIS. -->
+ <name>HOST_IF</name> <!-- name of field -->
+ <config>
+ <offset>0x157</offset>
+ <size>0x1</size>
+ </config>
+ <content format='32bit'>0x00</content>
+ </BinField>
+
+ <BinField>
+ <!-- SECURITY_LEVEL_T.
+ 0xFF: SECURITY_LEVEL_UNKNOWN: backward compatible
+ 0x00: SECURITY_LEVEL_NONE.
+ 0x01: SECURITY_LEVEL_STANDARD
+ 0x02: SECURITY_LEVEL_NIST. (require BootBlock with NIST support) -->
+ <name>SECURITY_LEVEL_T</name> <!-- name of field -->
+ <config>
+ <offset>0x15C</offset>
+ <size>0x1</size>
+ </config>
+ <content format='32bit'>0xFF</content>
+ </BinField>
+
+ <BinField>
+ <!-- Key revoke (bitwise). Set bit 0 to revoke key 0 etc. -->
+ <name>SECURITY_REVOKE_KEYS</name> <!-- name of field -->
+ <config>
+ <offset>0x1D7</offset>
+ <size>0x1</size>
+ </config>
+ <content format='bytes'>0x00</content>
+ </BinField>
+
+ <BinField>
+ <!-- security log offset -->
+ <name>SECURITY_LOG</name> <!-- name of field -->
+ <config>
+ <offset>0x1D8</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x090000</content>
+ </BinField>
+ <BinField>
+ <!-- hole 0 size: used for NIST security. -->
+ <name>SECURITY_LOG_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1DC</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x3000</content>
+ </BinField>
+
+
+ <BinField>
+ <!-- hole 0: used for NIST security. -->
+ <name>HOLE0</name> <!-- name of field -->
+ <config>
+ <offset>0x1E0</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x0A0000</content>
+ </BinField>
+ <BinField>
+ <!-- hole 0 size: used for NIST security. -->
+ <name>HOLE0_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1E4</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0xF70000</content>
+ </BinField>
+
+ <BinField>
+ <!-- hole 1: used for NIST security. -->
+ <name>HOLE1</name> <!-- name of field -->
+ <config>
+ <offset>0x1E8</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+ <BinField>
+ <!-- hole 1 size: used for NIST security. -->
+ <name>HOLE1_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1EC</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+
+
+ <BinField>
+ <!-- hole 2: used for NIST security. -->
+ <name>HOLE2</name> <!-- name of field -->
+ <config>
+ <offset>0x1F0</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0xFFFFFFFF</content>
+ </BinField>
+ <BinField>
+ <!-- hole 2 size: used for NIST security. -->
+ <name>HOLE2_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1F4</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+
+ <BinField>
+ <!-- hole 3: used for NIST security. -->
+ <name>HOLE3</name> <!-- name of field -->
+ <config>
+ <offset>0x1F8</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+ <BinField>
+ <!-- hole 3 size: used for NIST security. -->
+ <name>HOLE3_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1FC</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+
+</Bin_Ecc_Map>
diff --git a/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/UbootHeader_GBS.xml b/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/UbootHeader_GBS.xml
new file mode 100644
index 0000000..b99e7e6
--- /dev/null
+++ b/meta-gbs/recipes-bsp/images/npcm7xx-igps-native/UbootHeader_GBS.xml
@@ -0,0 +1,194 @@
+<!-- SPDX-License-Identifier: GPL-2.0
+#
+# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
+#
+# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
+#--------------------------------------------------------------------------->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Bin_Ecc_Map>
+ <!-- BMC mandatory fields -->
+ <ImageProperties>
+ <BinSize>0</BinSize> <!-- If 0 the binary size will be calculated by the tool -->
+ <PadValue>0xFF</PadValue> <!-- Byte value to pad the empty areas, default is 0 -->
+ </ImageProperties>
+
+ <BinField>
+ <!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
+ uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
+ <name>StartTag</name> <!-- name of field -->
+ <config>
+ <offset>0</offset> <!-- offset in the header -->
+ <size>0x8</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Code destination address, 32-bit aligned: for u-boot should be 0x80005000 so code will run in 0x80005200 as linked for -->
+ <name>DestAddr</name> <!-- name of field -->
+ <config>
+ <offset>0x140</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x8000</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- BootBlock or u-boot Code size -->
+ <name>CodeSize</name> <!-- name of field -->
+ <config>
+ <offset>0x144</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='FileSize'>u-boot.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- The BootBlock or u-boot binary file -->
+ <name>Code</name> <!-- name of field -->
+ <config>
+ <offset>0x200</offset> <!-- offset in the header -->
+ <size format='FileSize'>u-boot.bin</size> <!-- size in the header calculated by tool-->
+ </config>
+ <content format='FileContent'>u-boot.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
+ <name>FIU0_DRD_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x108</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x0300100B</content> <!-- content the user should fill 0x030032EB -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines the clock divide ratio from AHB to FIU0 clock -->
+ <name>FIU0_Clk_Divider</name> <!-- name of field -->
+ <config>
+ <offset>0x10C</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU0 CS1 is enabled -->
+ <name>fiu0_cs1_en</name> <!-- name of field -->
+ <config>
+ <offset>0x10D</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU0 CS2 is enabled -->
+ <name>fiu0_cs2_en</name> <!-- name of field -->
+ <config>
+ <offset>0x10E</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU0 CS3 is enabled -->
+ <name>fiu0_cs3_en</name> <!-- name of field -->
+ <config>
+ <offset>0x10F</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
+ <name>FIU3_DRD_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x110</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU3 FIU_DRD_CFG register -->
+ <name>FIU3_DWR_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x114</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines the clock divide ratio from AHB to FIU3 clock -->
+ <name>FIU3_Clk_Divider</name> <!-- name of field -->
+ <config>
+ <offset>0x118</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+
+ <BinField>
+ <!-- Defines if FIU3 CS1 is enabled -->
+ <name>fiu3_cs1_en</name> <!-- name of field -->
+ <config>
+ <offset>0x119</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU3 CS2 is enabled -->
+ <name>fiu3_cs2_en</name> <!-- name of field -->
+ <config>
+ <offset>0x11A</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines if FIU3 CS3 is enabled -->
+ <name>fiu3_cs3_en</name> <!-- name of field -->
+ <config>
+ <offset>0x11B</offset> <!-- offset in the header -->
+ <size>0x1</size> <!-- size in the header -->
+ </config>
+ <content format='bytes'>0x0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Version (Major.Minor) -->
+ <name>Version</name> <!-- name of field -->
+ <config>
+ <offset>0x148</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by BB code to FIU0 FIU_DWR_CFG register -->
+ <name>FIU0_DWR_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x14C</offset> <!-- offset in the header -->
+ <size>0x4</size> <!-- size in the header -->
+ </config>
+ <content format='32bit'>0x03001102</content> <!-- content the user should fill -->
+ </BinField>
+
+
+</Bin_Ecc_Map>
diff --git a/meta-gbs/recipes-bsp/images/npcm7xx-igps-native_%.bbappend b/meta-gbs/recipes-bsp/images/npcm7xx-igps-native_%.bbappend
new file mode 100644
index 0000000..06bc31f
--- /dev/null
+++ b/meta-gbs/recipes-bsp/images/npcm7xx-igps-native_%.bbappend
@@ -0,0 +1,12 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI_append += "file://BootBlockAndHeader_GBS.xml"
+SRC_URI_append += "file://UbootHeader_GBS.xml"
+
+# Prepare the Bootblock XMLs.
+do_gbs_prepare_xmls() {
+ cp ${WORKDIR}/BootBlockAndHeader_GBS.xml ${S}/ImageGeneration/references/
+ cp ${WORKDIR}/UbootHeader_GBS.xml ${S}/ImageGeneration/references/
+}
+
+addtask do_gbs_prepare_xmls after do_patch before do_install
diff --git a/meta-gbs/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config b/meta-gbs/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
new file mode 100644
index 0000000..0c38427
--- /dev/null
+++ b/meta-gbs/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
@@ -0,0 +1,24 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x4000
+
+# MTD SPI-dataflash example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+#/dev/mtd5 0x4200 0x4200
+#/dev/mtd6 0x4200 0x4200
+
+# NAND example
+#/dev/mtd0 0x4000 0x4000 0x20000 2
+
+# Block device example
+#/dev/mmcblk0 0xc0000 0x20000
+
+# VFAT example
+#/boot/uboot.env 0x0000 0x4000
diff --git a/meta-gbs/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend b/meta-gbs/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
new file mode 100644
index 0000000..8b66271
--- /dev/null
+++ b/meta-gbs/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton_%.bbappend
@@ -0,0 +1,6 @@
+FILESEXTRAPATHS_prepend_gbs := "${THISDIR}/${PN}:"
+SRC_URI_append_gbs = " file://fw_env.config"
+
+do_install_append_gbs() {
+ install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
+}