blob: d5bc4a1ca0b60f7841f2ef493ab5424da89f030d [file] [log] [blame]
*** Settings ***
Documentation Test dump functionality of OpenBMC.
Resource ../../lib/openbmc_ffdc.robot
Resource ../../lib/rest_client.robot
Resource ../../lib/dump_utils.robot
Resource ../../lib/boot_utils.robot
Resource ../../lib/utils.robot
Resource ../../lib/state_manager.robot
Library ../../lib/bmc_ssh_utils.py
Suite Setup Suite Setup Execution
Test Setup Open Connection And Log In
Test Teardown Test Teardown Execution
*** Test Cases ***
Pre Dump BMC Performance Test
[Documentation] Check performance of memory, CPU & file system of BMC.
[Tags] Pre_Dump_BMC_Performance_Test
Open Connection And Log In
Check BMC Performance
Verify User Initiated BMC Dump When Powered Off
[Documentation] Create user initiated BMC dump at host off state and
... verify dump entry for it.
[Tags] Verify_User_Initiated_BMC_Dump_When_Powered_Off
Redfish Power Off stack_mode=skip
${dump_id}= Create User Initiated Dump
Check Existence Of BMC Dump File ${dump_id}
Verify Dump Persistency On Service Restart
[Documentation] Create user dump, restart BMC service and verify dump
... persistency.
[Tags] Verify_Dump_Persistency_On_Service_Restart
Delete All BMC Dump
${dump_id}= Create User Initiated Dump
BMC Execute Command
... systemctl restart xyz.openbmc_project.Dump.Manager.service
Sleep 10s reason=Wait for BMC dump service to restart properly.
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}list
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Check Existence Of BMC Dump File ${dump_id}
Verify Dump Persistency On Reset
[Documentation] Create user dump, reset BMC and verify dump persistency.
[Tags] Verify_Dump_Persistency_On_Reset
Delete All BMC Dump
${dump_id}= Create User Initiated Dump
OBMC Reboot (off)
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}list
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Check Existence Of BMC Dump File ${dump_id}
Delete User Initiated BMC Dump And Verify
[Documentation] Delete user initiated dump and verify.
[Tags] Delete_User_Initiated_Dump_And_Verify
${dump_id}= Create User Initiated Dump
Check Existence Of BMC Dump File ${dump_id}
Delete BMC Dump ${dump_id}
Verify User Initiated Dump Size
[Documentation] Verify user Initiated BMC dump size is under 200k.
[Tags] Verify_User_Initiated_Dump_Size
${dump_id}= Create User Initiated Dump
${dump_size}= Read Attribute ${DUMP_ENTRY_URI}${dump_id} Size
# Max size for dump is 200k = 200x1024
Should Be True 0 < ${dump_size} < 204800
Check Existence Of BMC Dump File ${dump_id}
Create Two User Initiated Dump And Delete One
[Documentation] Create two dumps and delete the first.
[Tags] Create_Two_User_Initiated_Dump_And_Delete_One
${dump_id_1}= Create User Initiated Dump
${dump_id_2}= Create User Initiated Dump
Delete BMC Dump ${dump_id_1}
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}${dump_id_1}
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}${dump_id_2}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Check Existence Of BMC Dump File ${dump_id_2}
Create And Delete BMC Dump Multiple Times
[Documentation] Create and delete BMC dump multiple times.
[Tags] Create_And_Delete_BMC_Dump_Multiple_Times
FOR ${INDEX} IN 1 5
${dump_id}= Create User Initiated Dump
Delete BMC Dump ${dump_id}
END
Delete All BMC Dumps And Verify
[Documentation] Delete all BMC dumps and verify.
[Tags] Delete_All_BMC_Dumps_And_Verify
# Create some dump.
Create User Initiated Dump
Create User Initiated Dump
Delete All BMC Dump
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}list
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
Verify User Initiated BMC Dump When Host Booted
[Documentation] Create user initiated BMC dump at host booted state and
... verify dump entry for it.
[Tags] Verify_User_Initiated_BMC_Dump_When_Host_Booted
Redfish Power On stack_mode=skip
Create User Initiated Dump
Verify Core Dump Size
[Documentation] Verify BMC core dump size is under 200k.
[Tags] Verify_Core_Dump_Size
Delete All Dumps
Trigger Core Dump
Wait Until Keyword Succeeds 2 min 10 sec Get Dump Entries
${dump_entries}= Get URL List ${DUMP_ENTRY_URI}
${dump_size}= Read Attribute ${dump_entries[0]} Size
# Max size for dump is 200k = 200x1024
Should Be True 0 < ${dump_size} < 204800 msg=Size of dump is incorrect.
Dump Out Of Space Test
[Documentation] Verify out of dump space is reported when attempt
... to create too many dumps.
[Tags] Dump_Out_Of_Space_Test
[Setup] Delete All BMC Dump
# Systems typically hold 8-14 dumps before running out of dump space.
# Attempt to create too_many_dumps. Expect to run out of space
# before this.
${too_many_dumps} Set Variable ${20}
# Loop, creating a dump each iteration. Will either get dump_id or
# will get EMPTY when out of dump space.
FOR ${n} IN RANGE 0 ${too_many_dumps}
${dump_id}= Create User Initiated Dump check_out_of_space=${True}
Exit For Loop If '${dump_id}' == '${EMPTY}'
Check Existence Of BMC Dump File ${dump_id}
END
Run Keyword If '${dump_id}' != '${EMPTY}' Fail
... msg=Did not run out of dump space as expected.
Post Dump BMC Performance Test
[Documentation] Check performance of memory, CPU & file system of BMC.
[Tags] Post_Dump_BMC_Performance_Test
Open Connection And Log In
Check BMC Performance
Post Dump Core Dump Check
[Documentation] Check core dump existence on BMC after code update.
[Tags] Post_Dump_Core_Dump_Check
Check For Core Dumps
Verify Dump After Host Watchdog Error Injection
[Documentation] Inject host watchdog error and verify whether dump is generated.
[Tags] Verify_Dump_After_Host_Watchdog_Error_Injection
Redfish Power On
Run Keyword And Ignore Error Delete All Dumps
# Enable auto reboot
Set Auto Reboot ${1}
Trigger Host Watchdog Error 2000 30
Wait Until Keyword Succeeds 300 sec 20 sec Is Host Rebooted
#Get dump details
@{dump_entry_list}= Read Properties ${DUMP_ENTRY_URI}
# Verifying that there is only one dump
${length}= Get length ${dump_entry_list}
Should Be Equal As Integers ${length} ${1}
# Get dump id
${value}= Get From List ${dump_entry_list} 0
@{split_value}= Split String ${value} /
${dump_id}= Get From List ${split_value} -1
# Max size for dump is 200k = 200x1024
${dump_size}= Read Attribute ${DUMP_ENTRY_URI}${dump_id} Size
Should Be True 0 < ${dump_size} < 204800
Verify Download BMC Dump
[Documentation] Verify that a BMC dump can be downloaded to the local machine.
[Tags] Verify_Download_BMC_Dump
${dump_id}= Create User Initiated Dump
${dump_dict}= Get Dump Dict
${bmc_dump_name}= Fetch From Right ${dump_dict['${dump_id}']} /
${bmc_dump_checksum} ${stderr} ${rc}= BMC Execute Command
... md5sum ${dump_dict['${dump_id}']}|awk '{print$1}'
${bmc_dump_size} ${stderr} ${rc}= BMC Execute Command
... stat -c "%s" ${dump_dict['${dump_id}']}
${response}= OpenBMC Get Request ${DUMP_DOWNLOAD_URI}${dump_id}
... quiet=${1}
Should Be Equal As Strings ${response.status_code} ${HTTP_OK}
Create Binary File ${EXECDIR}${/}dumps ${response.content}
Run tar -xvf ${EXECDIR}${/}dumps
${download_dump_name}= Fetch From Left ${bmc_dump_name} .
${download_dump_checksum}= Run md5sum ${EXECDIR}/dumps|awk '{print$1}'
${download_dump_size}= Run stat -c "%s" ${EXECDIR}${/}dumps
OperatingSystem.Directory Should Exist ${EXECDIR}/${download_dump_name}
... msg=Created dump name and downloaded dump name don't match.
Should Be Equal As Strings ${bmc_dump_checksum} ${download_dump_checksum}
Should Be Equal As Strings ${bmc_dump_size} ${download_dump_size}
Run rm -rf ${EXECDIR}${/}${download_dump_name};rm ${EXECDIR}${/}dumps
*** Keywords ***
Suite Setup Execution
[Documentation] Do initial suite setup tasks.
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Run Keywords Set Suite Variable ${DUMP_URI} /xyz/openbmc_project/dump/ AND
... Set Suite Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/
Test Teardown Execution
[Documentation] Do the post test teardown.
Wait Until Keyword Succeeds 3 min 15 sec Verify No Dump In Progress
FFDC On Test Case Fail
Delete All BMC Dump
Close All Connections