| *** Settings *** |
| |
| Documentation Module to test IPMI SEL functionality. |
| Resource ../lib/ipmi_client.robot |
| Resource ../lib/openbmc_ffdc.robot |
| Library ../lib/ipmi_utils.py |
| Variables ../data/ipmi_raw_cmd_table.py |
| |
| Test Setup Test Setup Execution |
| Test Teardown FFDC On Test Case Fail |
| |
| *** Variables *** |
| |
| # Based on 13th byte of add SEL entry command as per IPMI spec |
| # event_dir and event_type variable value needs to be given. |
| ${sel_no_entry_msg} SEL has no entries |
| ${event_type} Lower Non-critical going low |
| ${event_dir} Asserted |
| |
| *** Test Cases *** |
| |
| Verify IPMI SEL Version |
| [Documentation] Verify IPMI SEL's version info. |
| [Tags] Verify_IPMI_SEL_Version |
| ${version_info}= Get IPMI SEL Setting Version |
| ${setting_status}= Fetch From Left ${version_info} ( |
| ${setting_status}= Evaluate $setting_status.replace(' ','') |
| |
| Should Be True ${setting_status} >= 1.5 |
| Should Contain ${version_info} v2 compliant case_insensitive=True |
| |
| |
| Verify Empty SEL |
| [Documentation] Verify IPMI sel clear command clears the SEL entry. |
| [Tags] Verify_Empty_SEL |
| |
| Redfish Power Off stack_mode=skip |
| |
| # Generate an error log and verify there is one at least. |
| Create Test PEL Log |
| ${resp}= Run IPMI Standard Command sel elist last 1 |
| Log To Console ${resp} |
| |
| Should Contain Any ${resp} system hardware failure Asserted |
| ... msg=Add SEL Entry failed. |
| |
| # Send SEL clear command and verify if it really clears up the SEL entry. |
| Run IPMI Standard Command sel clear |
| Sleep 5s |
| |
| ${resp}= Run IPMI Standard Command sel list |
| Should Contain ${resp} SEL has no entries case_insensitive=True |
| |
| |
| Verify Add SEL Entry |
| [Documentation] Verify add SEL entry. |
| [Tags] Verify_Add_SEL_Entry |
| [Teardown] Run Keywords FFDC On Test Case Fail AND Run IPMI Standard Command sel clear |
| |
| # The IPMI raw command to generate Temp sensor error is no longer working. |
| # Our aim is to check if the SEL command is listed in IPMI or not. |
| # Original keyword "Create User Defined SEL" for reference |
| Create Test PEL Log |
| |
| # Get last SEL entry. |
| ${resp}= Run IPMI Standard Command sel elist last 1 |
| # output: |
| # 1 | 11/17/2021 | 07:49:20 | System Event #0x01 | Undetermined system hardware failure | Asserted |
| Run Keywords Should Contain ${resp} system hardware failure AND |
| ... Should Contain ${resp} Asserted msg=Add SEL Entry failed. |
| |
| |
| Verify Add SEL Entry For Any Random Sensor |
| [Documentation] Create SEL entry and verify for any given random sensor. |
| [Tags] Verify_Add_SEL_Entry_For_Any_Random_Sensor |
| [Teardown] Run Keywords FFDC On Test Case Fail AND Run IPMI Standard Command sel clear |
| |
| # Get any sensor available from sensor list. |
| ${sensor_name}= Fetch One Threshold Sensor From Sensor List |
| |
| # Get Sensor ID from SDR get "sensor". |
| ${sensor_data1}= Fetch Sensor Details From SDR ${sensor_name} Sensor ID |
| ${sensor_number}= Get Bytes From SDR Sensor ${sensor_data1} |
| |
| # Get Sensor Type from SDR get "sensor". |
| ${sensor_data2}= Fetch Sensor Details From SDR ${sensor_name} Sensor Type (Threshold) |
| ${sensor_type_id}= Get Bytes From SDR Sensor ${sensor_data2} |
| |
| # Add SEL Entry. |
| # ${sel_entry_id} is the Record ID for added record (LSB First). |
| ${sel_create_resp}= Create SEL ${sensor_type_id} ${sensor_number} |
| ${sel_entry_id}= Split String ${sel_create_resp} |
| |
| # Get last SEL entry. |
| ${resp}= Run IPMI Standard Command sel elist |
| Should Not Contain ${resp} ${sel_no_entry_msg} |
| |
| # Output of the Sel elist. |
| # Below example is a continuous line statement. |
| # N | MM/DD/YYYY | HH:MM:SS | Sensor_Type Sensor_Name | |
| # Lower Non-critical going low | Asserted | Reading 0. |
| |
| ${get_sel_entry}= Get Lines Containing String ${resp} ${sensor_name} |
| ${sel_entry}= Get Lines Containing String ${get_sel_entry} ${event_type} |
| Should Contain ${sel_entry} ${event_dir} msg=Add SEL Entry failed. |
| |
| # Get SEL Entry IPMI Raw Command. |
| ${entry}= Get SEL Entry Via IPMI ${sel_entry_id[0]} ${sel_entry_id[1]} |
| |
| # Compare SEL Record ID. |
| ${sel_record_id}= Set Variable ${entry[2:4]} |
| Should Be Equal ${sel_record_id} ${sel_entry_id} |
| |
| # Sensor type compare. |
| Should Be Equal ${sensor_type_id} ${entry[12]} |
| |
| # Sensor number compare. |
| Should Be Equal ${sensor_number} ${entry[13]} |
| |
| |
| Verify Reserve SEL |
| [Documentation] Verify reserve SEL. |
| [Tags] Verify_Reserve_SEL |
| |
| ${resp}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['SEL_entry']['Reserve'][0]} |
| ${reserve_id}= Split String ${resp} |
| |
| # Execute clear SEL raw command with Reservation ID. |
| # Command will not execute unless the correct Reservation ID value is provided. |
| Run IPMI Standard Command |
| ... raw 0x0a 0x47 0x${reserve_id[0]} 0x${reserve_id[1]} 0x43 0x4c 0x52 0xaa |
| |
| # Check SEL list. |
| ${resp}= Run IPMI Standard Command sel list |
| Should Contain ${resp} SEL has no entries case_insensitive=True |
| |
| |
| Verify IPMI SEL Most Recent Addition Timestamp |
| [Documentation] Verify most recent addition timestamp in SEL info. |
| [Tags] Verify_IPMI_SEL_Most_Recent_Addition_Timestamp |
| |
| # Get Most Recent Addition Timestamp from SEL Info. |
| ${addition_timestamp}= Get Most Recent Addition Timestamp From SEL Info |
| |
| IF '${addition_timestamp}' != 'ffffffff' |
| # Convert to epoch timestamp. |
| ${epoch_addition}= Convert To Integer ${addition_timestamp} 16 |
| |
| # Get SEL List last 1 entry date and time and convert to epoch timestamp. |
| ${sel_epoch_time}= Get SEL Elist Last Entry Date In Epoch |
| |
| # Compare epoch of sel entry timestamp and last addition timestamp. |
| ${diff}= Evaluate int(${sel_epoch_time}) - int(${epoch_addition}) |
| Should Be True ${diff}<=600 |
| |
| ELSE |
| # Get any Sensor available from Sensor list |
| ${sensor_name}= Fetch One Threshold Sensor From Sensor List |
| |
| # Get Sensor ID from SDR Get "sensor" and Identify Sensor ID. |
| ${sensor_data1}= Fetch Sensor Details From SDR ${sensor_name} Sensor ID |
| ${sensor_number}= Get Bytes From SDR Sensor ${sensor_data1} |
| |
| # Get Sensor Type from SDR Get "sensor" and Identify Sensor Type. |
| ${sensor_data2}= Fetch Sensor Details From SDR ${sensor_name} Sensor Type (Threshold) |
| ${sensor_type_id}= Get Bytes From SDR Sensor ${sensor_data2} |
| |
| # Add SEL Entry. |
| ${sel_create_resp}= Create SEL ${sensor_type_id} ${sensor_number} |
| |
| # Get SEL List last 1 entry date and time and convert to epoch timestamp. |
| ${sel_epoch_time}= Get SEL Elist Last Entry Date In Epoch |
| |
| # Get Most Recent Addition Timestamp from SEL Info. |
| ${addition}= Get Most Recent Addition Timestamp From SEL Info |
| ${epoch_addition}= Convert To Integer ${addition} 16 |
| |
| # Compare epoch of sel entry timestamp and last addition timestamp. |
| ${diff}= Evaluate int(${epoch_addition}) - int(${sel_epoch_time}) |
| Should Be True ${diff}<=5 |
| END |
| |
| |
| Verify IPMI SEL Most Recent Erase Timestamp |
| [Documentation] Verify Most Recent Erase Timestamp In SEL Info with current |
| ... BMC epoch timestamp. |
| [Tags] Verify_IPMI_SEL_Most_Recent_Erase_Timestamp |
| |
| # Get BMC Current Time. |
| ${bmc_epoch_time}= Get BMC Time In Epoch |
| |
| # Get Most Recent Addition Timestamp from SEL Info. |
| ${addition_timestamp}= Get Most Recent Addition Timestamp From SEL Info |
| Should Be Equal ${addition_timestamp} ffffffff |
| |
| # Get Most Recent Erase Timestamp from SEL Info. |
| ${erase_timestamp}= Get Most Recent Erase Timestamp From SEL Info |
| ${epoch_erase}= Convert To Integer ${erase_timestamp} 16 |
| |
| # Compare epoch of erase timestamp and current bmc timestamp. |
| ${diff}= Evaluate int(${epoch_erase}) - int(${bmc_epoch_time}) |
| Should Be True ${diff}<=5 |
| |
| |
| Verify Clear SEL With Invalid Reservation ID |
| [Documentation] Verify clear SEL After generating another reserve ID. |
| [Tags] Verify_Clear_SEL_With_Invalid_Reservation_ID |
| |
| # Reserve Sel command - 1. |
| ${resp}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['SEL_entry']['Reserve'][0]} |
| ${reserve_id}= Split String ${resp} |
| |
| # Reserve Sel command - 2. |
| ${resp}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['SEL_entry']['Reserve'][0]} |
| |
| ${cmd}= Catenate ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][0]} 0x${reserve_id[0]} |
| ... 0x${reserve_id[1]} ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][1]} |
| |
| # Clear SEL command. |
| ${clear_resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][4]}* |
| ... Run IPMI Standard Command raw ${cmd} |
| Should Contain ${clear_resp} ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][5]} |
| |
| |
| Verify Reservation ID Erasure Status |
| [Documentation] Verify Erasure status by clearing SEL with Reserve ID and verify the response byte, |
| ... whether erasure status is updated in clear sel command response data using new Reserve ID. |
| [Tags] Verify_Reservation_ID_Erasure_Status |
| |
| # Generate Reserve ID 1. |
| ${resp}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['SEL_entry']['Reserve'][0]} |
| ${reserve_id}= Split String ${resp} |
| |
| ${cmd1}= Catenate ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][0]} 0x${reserve_id[0]} |
| ... 0x${reserve_id[1]} ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][1]} |
| |
| # Execute clear SEL raw command with Reservation ID. |
| # Command will not execute unless the correct Reservation ID value is provided. |
| Run IPMI Standard Command raw ${cmd1} |
| |
| # Generate Reserver ID 2. |
| ${resp}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['SEL_entry']['Reserve'][0]} |
| ${reserve_id}= Split String ${resp} |
| |
| ${cmd2}= Catenate ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][0]} 0x${reserve_id[0]} |
| ... 0x${reserve_id[1]} ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][6]} |
| |
| # Check the Erasure status of Clear SEL. |
| ${data}= Run IPMI Standard Command raw ${cmd2} |
| |
| # 00 - Erasure in Progress , 01 - Erasure Complete. |
| Should Contain Any ${data} 00 01 |
| |
| |
| Verify Clear SEL After Cold Reset |
| [Documentation] Verify Clear SEL for a reserve SEL ID after Cold Reset. |
| [Tags] Verify_Clear_SEL_After_Cold_Reset |
| |
| # Reserve Sel command. |
| ${resp}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['SEL_entry']['Reserve'][0]} |
| ${reserve_id}= Split String ${resp} |
| |
| # Run Cold Reset. |
| IPMI MC Reset Cold (off) |
| |
| ${cmd}= Catenate ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][0]} 0x${reserve_id[0]} |
| ... 0x${reserve_id[1]} ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][1]} |
| |
| # Clear SEL command. |
| ${clear_resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][5]}* |
| ... Run IPMI Standard Command raw ${cmd} |
| |
| Should Contain ${clear_resp} ${IPMI_RAW_CMD['SEL_entry']['Clear_SEL'][4]} |
| |
| |
| *** Keywords *** |
| |
| Create User Defined SEL |
| [Documentation] Create a user defined tempearature sensor SEL. |
| |
| # Create a SEL. |
| # Example: |
| # a | 02/14/2020 | 01:16:58 | Temperature #0x17 | | Asserted |
| Run IPMI Command |
| ... 0x0a 0x44 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x04 0x01 ${sensor_number} 0x00 0xa0 0x04 0x07 |
| |
| |
| Get SEL Entry Via IPMI |
| [Documentation] Get SEL Entry Via IPMI raw command. |
| [Arguments] ${record1} ${record2} |
| |
| # Description of Argument(s): |
| # ${record1} Record ID for added record, LS Byte |
| # ${record2} Record ID for added record, MS Byte |
| |
| # For example, when a first sel entry is added with IPMI raw command, the response will be "01 00". |
| # Here, ${record1} is 01, and ${record2} is 00. |
| |
| ${cmd}= Catenate ${IPMI_RAW_CMD['SEL_entry']['Get_SEL_Entry'][0]} 0x${record1} |
| ... 0x${record2} ${IPMI_RAW_CMD['SEL_entry']['Get_SEL_Entry'][1]} |
| |
| # Get SEL Entry Raw command. |
| ${resp}= Run IPMI Standard Command raw ${cmd} |
| ${resp}= Split String ${resp} |
| |
| [Return] ${resp} |
| |
| |
| Get Most Recent Addition Timestamp From SEL Info |
| [Documentation] Get Most recent addition timestamp From SEL Info. |
| |
| # Get SEL Info raw command. |
| ${sel_info}= Get SEL Info Via IPMI |
| |
| # Get Most Recent Addition timestamp in hex. |
| ${addition_timestamp}= Set Variable ${sel_info[5:9]} |
| Reverse List ${addition_timestamp} |
| ${addition_timestamp}= Evaluate "".join(${addition_timestamp}) |
| |
| [Return] ${addition_timestamp} |
| |
| |
| Get Most Recent Erase Timestamp From SEL Info |
| [Documentation] Get Most recent erase timestamp From SEL Info. |
| |
| # Get SEL Info Raw command. |
| ${sel_info}= Get SEL Info Via IPMI |
| |
| # Get Most Recent Erase timestamp in hex. |
| ${erase_timestamp}= Set Variable ${sel_info[9:13]} |
| Reverse List ${erase_timestamp} |
| ${erase_timestamp}= Evaluate "".join(${erase_timestamp}) |
| |
| [Return] ${erase_timestamp} |
| |
| |
| Get SEL Elist Last Entry Date In Epoch |
| [Documentation] Get the time from SEL elist last entry and returns epoch time. |
| |
| # Get SEL list last entry. |
| ${resp}= Run IPMI Standard Command sel elist last 1 |
| |
| # Get date from the sel entry and convert to epoch timestamp. |
| ${sel_entry_date}= Fetch Added SEL Date ${resp} |
| ${epoch_date}= Convert Date ${sel_entry_date} epoch exclude_millis=yes date_format=%m/%d/%Y %H:%M:%S |
| |
| [Return] ${epoch_date} |
| |
| |
| Get BMC Time In Epoch |
| [Documentation] Get the current time from BMC and returns epoch time. |
| |
| # Get the bmc native bmc date command response. |
| ${date}= Get Current Date from BMC |
| |
| ${epoch_date}= Convert Date ${date} epoch exclude_millis=yes date_format=%m/%d/%Y %H:%M:%S |
| |
| [Return] ${epoch_date} |
| |
| |
| Test Setup Execution |
| [Documentation] Do test setup tasks. |
| |
| Run IPMI Standard Command sel clear |
| Sleep 5s |