| *** Settings *** |
| Documentation This testing requires special setup where SNMP trapd is |
| ... configured and installed. For download, installation and |
| ... configuration refer http://www.net-snmp.org/. |
| |
| |
| Resource ../../lib/snmp/resource.robot |
| Resource ../../lib/snmp/redfish_snmp_utils.robot |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Resource ../../lib/logging_utils.robot |
| |
| |
| Test Teardown FFDC On Test Case Fail |
| Suite Setup Suite Setup Execution |
| |
| |
| *** Test Cases *** |
| |
| Configure SNMP Manager On BMC And Verify |
| [Documentation] Configure SNMP manager on BMC via Redfish and verify. |
| [Tags] Configure_SNMP_Manager_On_BMC_And_Verify |
| [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} ${HTTP_CREATED} |
| |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| |
| |
| Configure SNMP Manager On BMC With Non-default Port And Verify |
| [Documentation] Configure SNMP Manager On BMC And Verify. |
| [Tags] Configure_SNMP_Manager_On_BMC_With_Non_Default_Port_And_Verify |
| [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} |
| |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} ${HTTP_CREATED} |
| |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} |
| |
| |
| Configure SNMP Manager On BMC With Out Of Range Port And Verify |
| [Documentation] Configure SNMP Manager On BMC with out-of range port and verify. |
| [Tags] Configure_SNMP_Manager_On_BMC_With_Out_Of_Range_Port_And_Verify |
| [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${out_of_range_port} |
| |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${out_of_range_port} ${HTTP_BAD_REQUEST} |
| |
| ${status}= Run Keyword And Return Status |
| ... Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${out_of_range_port} |
| |
| Should Be Equal As Strings ${status} False |
| ... msg=BMC is allowing to configure out of range port. |
| |
| |
| Generate Error On BMC And Verify SNMP Trap |
| [Documentation] Generate error on BMC and verify trap and its fields. |
| [Tags] Generate_Error_On_BMC_And_Verify_SNMP_Trap |
| [Template] Create Error On BMC And Verify Trap |
| |
| # event_log expected_error |
| |
| # Generate internal failure error. |
| ${CMD_INTERNAL_FAILURE} ${SNMP_TRAP_BMC_INTERNAL_FAILURE} |
| |
| # Generate timeout error. |
| ${CMD_FRU_CALLOUT} ${SNMP_TRAP_BMC_CALLOUT_ERROR} |
| |
| # Generate informational error. |
| ${CMD_INFORMATIONAL_ERROR} ${SNMP_TRAP_BMC_INFORMATIONAL_ERROR} |
| |
| |
| Configure SNMP Manager On BMC With Alpha Port And Verify |
| [Documentation] Configure SNMP Manager On BMC with alpha port and verify. |
| [Tags] Configure_SNMP_Manager_On_BMC_With_Alpha_Port_And_Verify |
| [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${alpha_port} |
| |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${alpha_port} ${HTTP_BAD_REQUEST} |
| |
| ${status}= Run Keyword And Return Status |
| ... Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${alpha_port} |
| |
| Should Be Equal As Strings ${status} False |
| ... msg=BMC is allowing to configure invalid port. |
| |
| |
| Configure SNMP Manager On BMC With Empty Port And Verify |
| [Documentation] Configure SNMP Manager On BMC with empty port and verify |
| ... SNMP manager gets configured with default port. |
| [Tags] Configure_SNMP_Manager_On_BMC_With_Empty_Port_And_Verify |
| [Teardown] Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${empty_port} |
| |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| |
| |
| Configure Multiple SNMP Managers And Verify |
| [Documentation] Configure multiple SNMP managers and verify. |
| [Tags] Configure_Multiple_SNMP_Managers_And_Verify |
| [Teardown] Run Keywords |
| ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| ... AND |
| ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} |
| |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${SNMP_DEFAULT_PORT} |
| |
| |
| Generate Error On BMC And Verify SNMP Trap Is Sent To Non-Default Port |
| [Documentation] Generate error on BMC and verify trap and its fields. |
| [Tags] Generate_Error_On_BMC_And_Verify_SNMP_Trap_Is_Sent_To_Non-Default_Port |
| [Template] Create Error On BMC And Verify Trap On Non-Default Port |
| |
| # event_log expected_error |
| |
| # Generate internal failure error. |
| ${CMD_INTERNAL_FAILURE} ${SNMP_TRAP_BMC_INTERNAL_FAILURE} |
| |
| # Generate timeout error. |
| ${CMD_FRU_CALLOUT} ${SNMP_TRAP_BMC_CALLOUT_ERROR} |
| |
| # Generate informational error. |
| ${CMD_INFORMATIONAL_ERROR} ${SNMP_TRAP_BMC_INFORMATIONAL_ERROR} |
| |
| |
| Verify SNMP SysUpTime |
| [Documentation] Verify SNMP SysUpTime. |
| [Tags] Verify_SNMP_SysUpTime |
| |
| Generate Error And Verify System Up Time |
| |
| |
| Verify SNMP SysUpTime On BMC Reboot |
| [Documentation] Verify SNMP SysUpTime on BMC reboot. |
| [Tags] Verify_SNMP_SysUpTime_On_BMC_Reboot |
| |
| # Reboot BMC to reset system uptime. |
| OBMC Reboot (off) |
| |
| ${uptime}= Generate Error And Verify System Up Time |
| |
| # Check if uptime is reset after reboot. |
| Should Be True ${uptime} <= 1 msg=SNMP SysUpTime is not reset on reboot |
| |
| |
| Configure Multiple SNMP Managers With Non-default Port And Verify |
| [Documentation] Configure multiple SNMP Managers with non-default port And Verify. |
| [Tags] Configure_Multiple_SNMP_Managers_With_Non_Default_Port_And_Verify |
| [Teardown] Run Keywords |
| ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} |
| ... AND |
| ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} |
| |
| # Configure multiple SNMP managers with non-default port. |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} |
| Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} |
| |
| # Verify if SNMP managers are configured. |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${NON_DEFAULT_PORT1} |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} |
| |
| |
| Configure Multiple SNMP Managers With Different Ports And Verify |
| [Documentation] Configure multiple SNMP Managers with different ports And Verify. |
| [Tags] Configure_Multiple_SNMP_Managers_With_Different_Ports_And_Verify |
| [Teardown] Run Keywords |
| ... Delete SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| ... AND |
| ... Delete SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} |
| ... AND |
| ... Delete SNMP Manager Via Redfish ${SNMP_MGR3_IP} ${NON_DEFAULT_PORT2} |
| |
| # Configure multiple SNMP managers with different ports. |
| Configure SNMP Manager Via Redfish ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| Configure SNMP Manager Via Redfish ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} |
| Configure SNMP Manager Via Redfish ${SNMP_MGR3_IP} ${NON_DEFAULT_PORT2} |
| |
| # Verify if SNMP managers are configured. |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1} |
| Verify SNMP Manager Configured On BMC ${SNMP_MGR3_IP} ${NON_DEFAULT_PORT2} |
| |
| |
| *** Keywords *** |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup execution. |
| |
| Redfish.Login |
| |
| # Check for SNMP configurations. |
| Valid Value SNMP_MGR1_IP |
| Valid Value SNMP_DEFAULT_PORT |
| |
| |
| Generate Error And Verify System Up Time |
| [Documentation] Generate error and verify system up time. |
| |
| # Get system uptime on BMC. |
| # Example output of uptime: |
| # (8055.79 15032.86) |
| |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command cat /proc/uptime |
| @{times}= Split String ${cmd_output} |
| |
| ${bmc_uptime_in_minutes}= Evaluate int(${times}[0])/60 |
| |
| ${trap}= Create Error On BMC And Verify Trap |
| |
| # Extract System up time from SNMP trap. |
| # Example - SNMP trap: |
| # DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (252367) 0:42:03.67 |
| # SNMPv2-MIB::snmpTrapOID.0 = OID: SNMPv2-SMI::enterprises.49871.1.0.0.1 |
| # SNMPv2-SMI::enterprises.49871.1.0.1.1 = Gauge32: 54 |
| # SNMPv2-SMI::enterprises.49871.1.0.1.2 = Opaque: UInt64: 4622921648578756984 |
| # SNMPv2-SMI::enterprises.49871.1.0.1.3 = INTEGER: 3 |
| # SNMPv2-SMI::enterprises.49871.1.0.1.4 = STRING: |
| |
| @{words}= Split String ${trap}[0] = |
| |
| ${timeticks}= Fetch From Right ${words}[1] ( |
| ${snmp_sysuptime}= Fetch From Left ${timeticks} ) |
| |
| # SNMP SysUptime will be in milli seconds. |
| # Convert into minutes. |
| ${sysuptime_in_minutes}= Evaluate int(${snmp_sysuptime})/6000 |
| |
| Should Be Equal As Integers ${bmc_uptime_in_minutes} ${sysuptime_in_minutes} |
| |
| [Return] ${sysuptime_in_minutes} |