| *** Settings *** |
| |
| Documentation Module to test IPMI SEL Time functionality. |
| ... Pre-requisite Condition : Client Machine and BMC should be in Same TimeZone (example : UST) |
| ... |
| ... IPMI Raw command variables are defined under ../data/ipmi_raw_command_table.py |
| ... Python basic functionalities are defined under ../lib/functions.py imported under ../lib/resource.robot |
| ... |
| ... Test the Set/Get SEL Time functionality and compare the result against BMC Native command (date). |
| ... |
| ... Set the Time Sync Mode from NTP to Manual to Set SEL Time. |
| ... Time Sync Mode change performed via REDFISH URI. |
| ... Performs the change in Time Sync Mode with Test Setup and Teardown Execution with default NETWORK_TIMEOUT provided under ../lib/resource.robot. |
| ... |
| ... NETWORK_RESTART_TIME added for Set SEL Time and Add SEL Entry as the corresponding command takes approx 5 seconds for the operation to reflect. |
| ... |
| ... Current SEL time identified via BMC Native command (date) and perform SEL Time operations. |
| ... |
| ... Script Verifies SEL Time for various scenarios such as, |
| ... Get current time from BMC and add future year and compare against BMC native command (date), |
| ... Gets BMC Current Time and Adds 15 minutes and compare against BMC native command (date), |
| ... Gets BMC Current Time and subtracts 1 day and compare against BMC native command (date), |
| ... Add SEL Entry for all the above scenarios and compare against BMC native command (date). |
| |
| Library DateTime |
| Library Collections |
| Library String |
| Library ../lib/ipmi_utils.py |
| Resource ../lib/ipmi_client.robot |
| Resource ../lib/openbmc_ffdc.robot |
| Variables ../data/ipmi_raw_cmd_table.py |
| |
| Test Setup Test Setup Execution |
| Test Teardown Test Teardown Execution |
| |
| *** Variables *** |
| |
| ${NETWORK_RESTART_TIME} 5s |
| |
| |
| *** Test Cases *** |
| |
| Verify Default Get SEL Time |
| [Documentation] Verify IPMI Get SEL Time. |
| [Tags] Verify_Default_Get_SEL_Time |
| [Setup] Printn |
| [Teardown] FFDC On Test Case Fail |
| |
| # Gets the current SEL time via Get SEL Time Command. |
| ${resp}= Get SEL Time Command |
| Should Not Be Empty ${resp} |
| |
| |
| Set SEL Time On NTP Mode |
| [Documentation] IPMI Set SEL Time without NTP |
| [Tags] Verify_SEL_Set_Time_On_NTP_Mode |
| [Setup] Printn |
| [Teardown] printn |
| |
| # Get current time from BMC and add future year (here, 5years). |
| ${sel_date}= Get Specific Sel Date 5 |
| |
| # Gives Hexa decimal raw command data request with the prefix of 0x. |
| ${sel_date_raw}= Converting Date to HexaDecimal ${sel_date} |
| |
| ${Set_sel_time}= Run Keyword and Expect Error *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][2]}* |
| ... Run IPMI Command ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw} |
| Should Contain ${Set_sel_time} ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][1]} |
| |
| |
| Verify SEL Set Time For Specific Time |
| [Documentation] Verify IPMI Set SEL Time. |
| [Tags] Verify_SEL_Set_Time_For_Specific_Time |
| |
| # Get current time from BMC and add future year (here, 5years). |
| ${sel_date}= Get Specific Sel Date 5 |
| |
| # Gives Hexa decimal raw command data request with the prefix of 0x. |
| ${sel_date_raw}= Converting Date to HexaDecimal ${sel_date} |
| |
| # Set SEL Entry command. |
| Set SEL Time Entry Via Raw Command ${sel_date_raw} |
| |
| # Get SEL Time command. |
| ${get_sel_time}= Check Current Date Time Via IPMI |
| |
| # Identify Time difference and find the difference is less than 6 seconds. |
| # Command execution may happen at the end of millisecond so considered 6 seconds as difference. |
| ${time_difference}= Get Time Difference ${get_sel_time} ${sel_date} |
| Should Be True 0<=${time_difference}<=5 |
| ... msg=Set SEL Time Not Working |
| |
| # Get BMC time (native) and compare with set sel time given. |
| ${bmc_time}= Get Current Date from BMC |
| |
| ${difference}= Get Time Difference ${bmc_time} ${sel_date} |
| Should Be True 0<=${difference}<=6 |
| |
| |
| Verify Set SEL Time With Future Date And Time |
| [Documentation] Verify IPMI Get SEL Time by adding 15 minutes from current time. |
| [Tags] Verify_Set_SEL_Time_With_Future_Date_And_Time |
| |
| # Gets BMC Current Time and Adds 15 minutes and sets the SEL Time. |
| ${sel_time} ${set_sel_time}= Identify SEL Time Future DateTime 06:15:00 |
| |
| # Set SEL Time via IPMI command. |
| Set SEL Time Via IPMI ${sel_time} |
| |
| # Get SEL Time Command. |
| ${get_sel_time}= Check Current Date Time Via IPMI |
| |
| # Difference of time between set sel time and get time. |
| ${difference}= Get Time Difference ${get_sel_time} ${set_sel_time} |
| Should Be True 0<=${difference}<=2 |
| |
| # Difference of time between BMC Date and Get SEL Time. |
| ${bmc_time}= Get Current Date from BMC |
| ${difference}= Get Time Difference ${get_sel_time} ${bmc_time} |
| Should Be True 0<=${difference}<=2 |
| |
| |
| Verify Set SEL Time With Past Date And Time |
| [Documentation] Verify IPMI Get SEL Time for yime delay of 1 day from current dat and time. |
| [Tags] Verify_Set_SEL_Time_With_Past_Date_And_Time |
| |
| # Gets BMC current time and subtracts 1 day and sets the SEL Time. |
| ${sel_time} ${set_sel_time}= Identify SEL Time DateTime Delay 1d |
| |
| ${status}= Run Keyword And Return Status Should Not Contain ${sel_time} 1969 |
| ... msg=Date cannot be less than 1970. |
| |
| IF '${status}' == '${TRUE}' |
| # Set SEL Time via IPMI command. |
| Set SEL Time Via IPMI ${sel_time} |
| # Get SEL Time Command. |
| ${get_sel_time}= Check Current Date Time Via IPMI |
| # Difference of time between set sel time and get time. |
| ${difference}= Get Time Difference ${get_sel_time} ${set_sel_time} |
| Should Be True 0<=${difference}<=2 |
| # Difference of time between BMC Date and Get SEL Time. |
| ${bmc_time}= Get Current Date from BMC |
| ${difference}= Get Time Difference ${get_sel_time} ${bmc_time} |
| Should Be True 0<=${difference}<=2 |
| ELSE |
| FAIL SEL Time cannot set Date less than 1970 |
| END |
| |
| |
| Verify SEL Set Time For Invalid Data Request |
| [Documentation] Verify IPMI Get SEL Time for invalid data request |
| [Tags] Verify_SEL_Set_Time_For_Invalid_Data_Request |
| [Setup] Printn |
| [Teardown] FFDC On Test Case Fail |
| |
| # Gets BMC current date via date command. |
| ${current_date}= Get Current Date from BMC |
| |
| # Gives hexa decimal Raw command data request with the prefix of 0x. |
| ${sel_date_raw}= Converting Date to HexaDecimal ${current_date} |
| |
| # Set Invalid SEL Time with one extra request byte. |
| ${Set_seltime_invalid}= Run Keyword and Expect Error *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][4]}* |
| ... Run IPMI Command ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw} 0x00 |
| Should Contain ${Set_seltime_invalid} ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][3]} |
| |
| |
| Verify SEL Set Time For Incomplete Data Request |
| [Documentation] Verify IPMI Get SEL Time for invalid data with one byte less request data. |
| [Tags] Verify_SEL_Set_Time_For_Incomplete_Data_Request |
| [Setup] Printn |
| [Teardown] FFDC On Test Case Fail |
| |
| # Gets BMC current date via date command. |
| ${current_date}= Get Current Date from BMC |
| |
| # Gives hexa decimal raw command data request with the prefix of 0x. |
| ${sel_date_raw}= Converting Date to HexaDecimal ${current_date} |
| |
| # For data request less than expected byes, remove last byte. |
| ${sel_date_raw}= Split String ${sel_date_raw} |
| Remove From List ${sel_date_raw} -1 |
| ${sel_date_raw}= Evaluate " ".join(${sel_date_raw}) |
| |
| # Set incomplete SEL Time with one less request byte. |
| ${Set_seltime_incomplete}= Run Keyword and Expect Error *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][4]}* |
| ... Run IPMI Command ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw} |
| Should Contain ${Set_seltime_incomplete} ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][3]} |
| |
| |
| Verify SEL Time In SEL Entry |
| [Documentation] Verify Configured SEL Time reflects in newly added SEL Entry. |
| [Tags] Verify_SEL_Time_In_SEL_Entry |
| |
| Clear The SEL |
| |
| # change to manual, get current time and add future year (here, 5years). |
| ${sel_date}= Get Specific Sel Date 5 |
| |
| # Gives hexa decimal raw command data request with the prefix of 0x. |
| ${sel_date_raw}= Converting Date to HexaDecimal ${sel_date} |
| |
| # Set SEL Entry Command. |
| Set SEL Time Entry Via Raw Command ${sel_date_raw} |
| |
| # Get SEL Time Command. |
| ${get_sel_time}= Check Current Date Time Via IPMI |
| |
| # Identify Time difference and find the difference is less than 6 seconds. |
| # Command execution may happen at the end of millisecond so considered 6 seconds as difference. |
| ${time_difference}= Get Time Difference ${get_sel_time} ${sel_date} |
| Should Be True 0<=${time_difference}<=5 |
| ... msg=Set SEL Time Not Working |
| |
| # Get BMC time (native) and compare with set sel time given. |
| ${bmc_time}= Get Current Date from BMC |
| |
| ${difference}= Get Time Difference ${bmc_time} ${sel_date} |
| Should Be True 0<=${difference}<=6 |
| |
| # Get any Sensor available from Sensor list. |
| ${sensor_name}= Fetch Any Sensor From Sensor List |
| |
| # Get Sensor ID from SDR Get "sensor". |
| ${sensor_data1}= Fetch Sensor Details From SDR ${sensor_name} Sensor ID |
| ${name_sensor} ${sensor_number}= Get Data And Byte From SDR Sensor ${sensor_data1} |
| |
| # Get Sensor Type from SDR Get "sensor". |
| ${sensor_data2}= Fetch Sensor Details From SDR ${sensor_name} Sensor Type (Threshold) |
| ${sensor_type} ${sensor_type_id}= Get Data And Byte From SDR Sensor ${sensor_data2} |
| |
| # Add SEL Entry. |
| ${sel_create_resp}= Create SEL ${sensor_type_id} ${sensor_number} |
| |
| # Finds the last added sel entry. |
| ${resp}= Verify Last SEL Added ${sensor_type} ${sensor_name} |
| |
| # Fetches the date of the last added SEL Entry. |
| ${sel_entry_date}= Fetch Added SEL Date ${resp} |
| |
| # Identify and find the time difference is less than 60 seconds. |
| # Finding the sensor details and execution may take up to a minute. |
| # Compare date and time of Set SEL with sel entry. |
| ${d}= Get Time Difference ${sel_entry_date} ${sel_date} |
| Should Be True 0<=${d}<=60 |
| |
| |
| Verify SEL Time In SEL Entry For Future Date and Time |
| [Documentation] Verify configured SEL Time (Future Date & Time) in added SEL Entry. |
| [Tags] Verify_SEL_Time_In_SEL_Entry_For_Future_Date_and_Time |
| |
| Clear The SEL |
| |
| # Gets BMC Current Time and Adds 15 minutes and sets the SEL Time. |
| ${sel_time} ${set_sel_time}= Identify SEL Time Future DateTime 06:15:00 |
| |
| # Set SEL Time via IPMI command. |
| Set SEL Time Via IPMI ${sel_time} |
| |
| # Get SEL Time Command. |
| ${get_sel_time}= Check Current Date Time Via IPMI |
| |
| # Difference of time between set sel time and get time. |
| ${difference}= Get Time Difference ${get_sel_time} ${set_sel_time} |
| Should Be True 0<=${difference}<=2 |
| |
| # Difference of time between BMC Date and Get SEL Time. |
| ${bmc_time}= Get Current Date from BMC |
| ${difference}= Get Time Difference ${get_sel_time} ${bmc_time} |
| Should Be True 0<=${difference}<=2 |
| |
| # Get any Sensor available from Sensor list. |
| ${sensor_name}= Fetch Any Sensor From Sensor List |
| |
| # Get Sensor ID from SDR Get "sensor". |
| ${sensor_data1}= Fetch Sensor Details From SDR ${sensor_name} Sensor ID |
| ${name_sensor} ${sensor_number}= Get Data And Byte From SDR Sensor ${sensor_data1} |
| |
| # Get Sensor Type from SDR Get "sensor". |
| ${sensor_data2}= Fetch Sensor Details From SDR ${sensor_name} Sensor Type (Threshold) |
| ${sensor_type} ${sensor_type_id}= Get Data And Byte From SDR Sensor ${sensor_data2} |
| |
| # Add SEL Entry. |
| ${sel_create_resp}= Create SEL ${sensor_type_id} ${sensor_number} |
| |
| # Finds the last added sel entry. |
| ${resp}= Verify Last SEL Added ${sensor_type} ${sensor_name} |
| |
| # Fetches the date of the last added SEL Entry. |
| ${sel_entry_date}= Fetch Added SEL Date ${resp} |
| |
| # Identify and find the time difference is less than 60 seconds. |
| # Finding the sensor details and execution may take up to a minute. |
| # Compare date and time of Set SEL with sel entry. |
| ${d}= Get Time Difference ${sel_entry_date} ${set_sel_time} |
| Should Be True 0<=${d}<=60 |
| |
| |
| Verify SEL Time In SEL Entry For Past Date And Time |
| [Documentation] Verify configured SEL Time (Past Date & Time) in added SEL Entry. |
| [Tags] Verify_SEL_Time_In_SEL_Entry_For_Past_Date_And_Tine |
| |
| Clear The SEL |
| |
| # Gets BMC Current Time and subtracts 1 day and sets the SEL Time. |
| ${sel_time} ${set_sel_time}= Identify SEL Time DateTime Delay 1d |
| |
| ${status}= Run Keyword And Return Status Should Not Contain ${sel_time} 1969 |
| ... msg=Date cannot be less than 1970 |
| |
| IF '${status}' == '${TRUE}' |
| # Set SEL Time via IPMI command. |
| Set SEL Time Via IPMI ${sel_time} |
| # Get SEL Time Command. |
| ${get_sel_time}= Check Current Date Time Via IPMI |
| # Difference of time between set sel time and get time. |
| ${difference}= Get Time Difference ${get_sel_time} ${set_sel_time} |
| Should Be True 0<=${difference}<=2 |
| # Difference of time between BMC Date and Get SEL Time. |
| ${bmc_time}= Get Current Date from BMC |
| ${difference}= Get Time Difference ${get_sel_time} ${bmc_time} |
| Should Be True 0<=${difference}<=2 |
| |
| # Get any Sensor available from Sensor list. |
| ${sensor_name}= Fetch Any Sensor From Sensor List |
| # Get Sensor ID from SDR Get "sensor". |
| ${sensor_data1}= Fetch Sensor Details From SDR ${sensor_name} Sensor ID |
| ${name_sensor} ${sensor_number}= Get Data And Byte From SDR Sensor ${sensor_data1} |
| |
| # Get Sensor Type from SDR Get "sensor". |
| ${sensor_data2}= Fetch Sensor Details From SDR ${sensor_name} Sensor Type (Threshold) |
| ${sensor_type} ${sensor_type_id}= Get Data And Byte From SDR Sensor ${sensor_data2} |
| |
| # Add SEL Entry. |
| ${sel_create_resp}= Create SEL ${sensor_type_id} ${sensor_number} |
| |
| # Finds the last added sel entry. |
| ${resp}= Verify Last SEL Added ${sensor_type} ${sensor_name} |
| |
| # Fetches the date of the last added SEL Entry. |
| ${sel_entry_date}= Fetch Added SEL Date ${resp} |
| |
| # Identify and find the time difference is less than 60 seconds. |
| # Finding the sensor details and execution may take up to a minute. |
| # Compare date and time of Set SEL with sel entry. |
| ${d}= Get Time Difference ${sel_entry_date} ${set_sel_time} |
| Should Be True 0<=${d}<=60 |
| ELSE |
| FAIL SEL Time cannot set Date less than 1970. |
| END |
| |
| |
| Verify Multiple Set SEL Time With Multiple Add SEL Entry |
| [Documentation] Verify SEL time in multiple addition Of SEL entry. |
| [Tags] Verify_Multiple_Set_SEL_Time_With_Multiple_Add_SEL_Entry |
| |
| # Gets BMC Current Time and Adds 15 minutes and sets the SEL Time. |
| ${sel_time} ${set_sel_time}= Identify SEL Time Future DateTime 06:15:00 |
| |
| FOR ${i} IN RANGE 1 6 |
| |
| # Set SEL Time via IPMI command. |
| Set SEL Time Via IPMI ${sel_time} |
| |
| # Clear the SEL. |
| Clear The SEL |
| |
| # Get any Sensor available from Sensor list. |
| ${sensor_name}= Fetch Any Sensor From Sensor List |
| |
| # Get Sensor ID from SDR Get "sensor" and Identify Sensor ID. |
| ${sensor_data1}= Fetch Sensor Details From SDR ${sensor_name} Sensor ID |
| ${name_sensor} ${sensor_number}= Get Data And Byte From SDR Sensor ${sensor_data1} |
| |
| # Get Sensor Type from SDR Get "sensor" and identify Sensor Type. |
| ${sensor_data2}= Fetch Sensor Details From SDR ${sensor_name} Sensor Type (Threshold) |
| ${sensor_type} ${sensor_type_id}= Get Data And Byte From SDR Sensor ${sensor_data2} |
| |
| # Add SEL Entry. |
| ${sel_create_resp}= Create SEL ${sensor_type_id} ${sensor_number} |
| |
| # Finds the last added sel entry. |
| ${resp}= Verify Last SEL Added ${sensor_type} ${sensor_name} |
| |
| # Fetches the date of the last added SEL Entry. |
| ${sel_entry_date}= Fetch Added SEL Date ${resp} |
| |
| # Identify and find the time difference is less than 60 seconds. |
| # Finding the sensor details and execution may take up to a minute. |
| # Compare date and time of Set SEL with sel entry. |
| ${d}= Get Time Difference ${sel_entry_date} ${set_sel_time} |
| Should Be True ${d}<=60 |
| |
| END |
| |
| |
| *** Keywords *** |
| |
| Time Sync Mode Change Through Redfish |
| [Documentation] Export IP, token and change the time sync to manual. |
| [Arguments] ${value} |
| |
| # Description of argument(s): |
| # ${value} can be either ${FALSE} or ${TRUE} |
| |
| # May be changed to WebView. |
| |
| # Changing Time Sync Mode to Manual. |
| Change Time Sync Mode Via Redfish ${value} |
| |
| |
| Change Time Sync Mode Via Redfish |
| [Documentation] To change the time sync mode via Redfish. |
| [Arguments] ${value} |
| |
| # Description of argument(s): |
| # ${value} can be either ${FALSE} or ${TRUE} |
| |
| # Creates request body for Redfish url. |
| ${mode}= Create Dictionary ProtocolEnabled=${value} |
| ${data}= Create Dictionary NTP=${mode} |
| |
| # Patches the obtained body to the given url. |
| Redfish.patch ${REDFISH_NW_PROTOCOL_URI} body=&{data} |
| ... valid_status_codes=[${HTTP_NO_CONTENT}] |
| |
| Sleep ${NETWORK_RESTART_TIME} |
| |
| |
| Get SEL Time Command |
| [Documentation] Get SEL Time command. |
| |
| # The response will be 8 byte timestamp in hexadecimal. |
| # example: If current date and time is "Wed May 4 18:55:00 UTC 2022", |
| # then, ${get_sel_time} will be "07 cc 72 62". |
| ${get_sel_time}= Run IPMI Command |
| ... ${IPMI_RAW_CMD['SEL_entry']['Get_SEL_Time'][0]} |
| |
| [Return] ${get_sel_time} |
| |
| |
| Set SEL Time Entry Via Raw Command |
| [Documentation] Set SEL Time command. |
| [Arguments] ${sel_date_raw} |
| |
| # Description of argument(s): |
| # ${sel_date_raw} Time to set in hexadecimal bytes. |
| # Example: |
| # If date is 1st January 2022 12:30:00 PM, |
| # the hexadecimal timestamp is, 61D04948. |
| # then the request bytes are, |
| # ${sel_date_raw} 0x48 0x49 0xd0 0x61 |
| |
| Run IPMI Command ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw} |
| Sleep ${NETWORK_RESTART_TIME} |
| |
| |
| Clear The SEL |
| [Documentation] Clear SEL Command. |
| |
| # Clear the SEL. |
| ${out}= Run IPMI Standard Command sel clear |
| Should Contain ${out} Clearing SEL |
| Sleep 2s |
| |
| |
| Verify Last SEL Added |
| [Documentation] Verify last SEL added. |
| [Arguments] ${sensor_type} ${sensor_name} |
| |
| # Description of argument(s): |
| # ${sensor_type} Type of the sensor (say Fan, Temp, etc.,). |
| # ${sensor_name} Name of the sensor. |
| |
| ${resp}= Run IPMI Standard Command sel elist last 1 |
| Run Keywords Should Contain ${resp} ${sensor_type} ${sensor_name} AND |
| ... Should Contain ${resp} Asserted msg=Add SEL Entry failed. |
| Should Not Contain ${resp} reset/cleared |
| |
| [Return] ${resp} |
| |
| |
| Check Current Date Time Via IPMI |
| [Documentation] Verify Current Date and Time Via IPMI user command. |
| |
| ${resp}= Run IPMI Standard Command sel time get |
| [Return] ${resp} |
| |
| |
| Get Specific Sel Date |
| [Documentation] Gets initial time and adds year to the current date and returns future date. |
| [Arguments] ${year} |
| |
| # Description of argument(s): |
| # ${year} Can be any number of years (say 5 year). |
| |
| ${current_date}= Get Current Date from BMC |
| |
| # Converting given years to days by multiplying with 365days and adding the days to current date. |
| ${days}= Evaluate 365*${year}+1 |
| ${date} = Add Time To Date ${current_date} ${days}d result_format=%m/%d/%Y %H:%M:%S date_format=%m/%d/%Y %H:%M:%S |
| |
| [Return] ${date} |
| |
| |
| Converting Date to HexaDecimal |
| [Documentation] Converting the date into hexa decimal values. |
| [Arguments] ${date} |
| |
| # Description of argument(s): |
| # ${date} Can be any date in format %m/%d/%Y %H:%M:%S. |
| |
| ${epoch_date}= Convert Date ${date} epoch exclude_millis=yes date_format=%m/%d/%Y %H:%M:%S |
| ${date}= Convert To Hex ${epoch_date} lowercase=yes |
| |
| # function calls from utils.py. |
| # Length of the date byte should be 8 so that each bytes are separated. |
| ${date}= Zfill Data ${date} 8 |
| # To split every two characters to form one byte each. |
| ${date}= Split String With Index ${date} 2 |
| # Prefix every list index value with 0x. |
| ${date}= Prefix Bytes ${date} |
| |
| # Reverse the bytes and join the list to form request Time stamp data. |
| Reverse List ${date} |
| ${date}= Evaluate " ".join(${date}) |
| |
| [Return] ${date} |
| |
| |
| Get Time Difference |
| [Documentation] Converting the date into hexa decimal values. |
| [Arguments] ${date1} ${date2} |
| |
| # Description of argument(s): |
| # ${date1} Can be any date in format %m/%d/%Y %H:%M:%S. |
| # ${date2} Can be any date in format %m/%d/%Y %H:%M:%S. |
| |
| ${epoch_date1}= Convert Date ${date1} epoch exclude_millis=yes date_format=%m/%d/%Y %H:%M:%S |
| ${epoch_date2}= Convert Date ${date2} epoch exclude_millis=yes date_format=%m/%d/%Y %H:%M:%S |
| |
| ${diff}= Evaluate int(${epoch_date1}) - int(${epoch_date2}) |
| |
| [Return] ${diff} |
| |
| |
| Identify SEL Time Future DateTime |
| [Documentation] Identify SEL Time Future DateTime. |
| [Arguments] ${time} |
| |
| # Description of argument(s): |
| # ${time} Can be any number of hours or minutes in format %H:%M:%S. |
| |
| # Gets BMC current date via date command. |
| ${current_date}= Get Current Date from BMC |
| |
| ${datetime} = Add Time To Date ${current_date} ${time} result_format=%m/%d/%Y %H:%M:%S date_format=%m/%d/%Y %H:%M:%S |
| |
| #Set SEL Time. |
| ${quoted_date}= Fetch Date ${datetime} |
| |
| [Return] ${quoted_date} ${datetime} |
| |
| |
| Identify SEL Time DateTime Delay |
| [Documentation] Identify SEL Time DateTime Delay by subtracting given date. |
| [Arguments] ${days} |
| |
| # Description of argument(s): |
| # ${days} Can be any days (say 3d). |
| |
| # Gets BMC current date via date command. |
| ${current_date}= Get Current Date from BMC |
| |
| ${datetime} = Subtract Time From Date ${current_date} ${days} result_format=%m/%d/%Y %H:%M:%S date_format=%m/%d/%Y %H:%M:%S |
| |
| # Format the sel time. |
| # function call from lib/utils.py. |
| ${quoted_date}= Fetch Date ${datetime} |
| |
| [Return] ${quoted_date} ${datetime} |
| |
| |
| Set SEL Time Via IPMI |
| [Documentation] Set SEL Time for given date using IPMI. |
| [Arguments] ${date_time} |
| |
| # Description of argument(s): |
| # ${date_time} Can be any date in format %m/%d/%Y %H:%M:%S. |
| |
| ${resp}= Run IPMI Standard Command sel time set "${date_time}" |
| Should Not Contain ${resp} Unspecified error |
| |
| |
| Test Setup Execution |
| [Documentation] Test Setup Execution. |
| |
| Redfish.Login |
| # Change timesync mode to manual with timeout as per resource.robot. |
| Time Sync Mode Change Through Redfish ${FALSE} |
| Sleep ${NETWORK_TIMEOUT} |
| |
| |
| Test Teardown Execution |
| [Documentation] For execution of Test teardown. |
| |
| Clear The SEL |
| |
| # Change TimeSync mode to NTP with Timeout as per default resource.robot. |
| Time Sync Mode Change Through Redfish ${TRUE} |
| Sleep ${NETWORK_TIMEOUT} |
| Redfish.Logout |
| FFDC On Test Case Fail |