blob: 6a2a8b45af0e0f110bce5bc9bcde5aebfddda550 [file] [log] [blame]
*** Settings ***
Documentation This module provides one wrapper keyword for each kind of boot
... test supported by obmc_boot_test.py.
Resource ../extended/obmc_boot_test_resource.robot
*** Keywords ***
REST Power On
[Documentation] Do "REST Power On" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=REST Power On
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Redfish Power On
[Documentation] Do "Redfish Power On" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Redfish Power On
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Power On
[Documentation] Do "IPMI Power On" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power On
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
REST Power Off
[Documentation] Do "REST Power Off" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=REST Power Off
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Redfish Power Off
[Documentation] Do "Redfish Power Off" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Redfish Power Off
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
REST Hard Power Off
[Documentation] Do "REST Hard Power Off" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=REST Hard Power Off
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Redfish Hard Power Off
[Documentation] Do "Redfish Hard Power Off" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=Redfish Hard Power Off
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Power Off
[Documentation] Do "IPMI Power Off" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Off
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Power Soft
[Documentation] Do "IPMI Power Soft" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Soft
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Host Power Off
[Documentation] Do "Host Power Off" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Host Power Off
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
APOR
[Documentation] Do "APOR" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=APOR
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
OBMC Reboot (run)
[Documentation] Do "OBMC Reboot (run)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=OBMC Reboot (run)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
REST OBMC Reboot (run)
[Documentation] Do "REST OBMC Reboot (run)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=REST OBMC Reboot (run)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
OBMC Reboot (off)
[Documentation] Do "OBMC Reboot (off)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=OBMC Reboot (off)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
REST OBMC Reboot (off)
[Documentation] Do "REST OBMC Reboot (off)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=REST OBMC Reboot (off)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
PDU AC Cycle (run)
[Documentation] Do "PDU AC Cycle (run)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=PDU AC Cycle (run)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
PDU AC Cycle (off)
[Documentation] Do "PDU AC Cycle (off)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=PDU AC Cycle (off)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI MC Reset Warm (run)
[Documentation] Do "IPMI MC Reset Warm (run)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI MC Reset Warm (run)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI MC Reset Warm (off)
[Documentation] Do "IPMI MC Reset Warm (off)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI MC Reset Warm (off)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI MC Reset Cold (run)
[Documentation] Do "IPMI MC Reset Cold (run)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI MC Reset Cold (run)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI MC Reset Cold (off)
[Documentation] Do "IPMI MC Reset Cold (off)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI MC Reset Cold (off)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Std MC Reset Warm (run)
[Documentation] Do "IPMI Std MC Reset Warm (run)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI Std MC Reset Warm (run)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Std MC Reset Warm (off)
[Documentation] Do "IPMI Std MC Reset Warm (off)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI Std MC Reset Warm (off)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Std MC Reset Cold (run)
[Documentation] Do "IPMI Std MC Reset Cold (run)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI Std MC Reset Cold (run)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Std MC Reset Cold (off)
[Documentation] Do "IPMI Std MC Reset Cold (off)" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test
... \ loc_boot_stack=IPMI Std MC Reset Cold (off)
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Power Cycle
[Documentation] Do "IPMI Power Cycle" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Cycle
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
IPMI Power Reset
[Documentation] Do "IPMI Power Reset" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Reset
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Auto Reboot
[Documentation] Do "Auto Reboot" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Auto Reboot
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Host Reboot
[Documentation] Do "Host Reboot" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Host Reboot
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Redfish Host Reboot
[Documentation] Do "Redfish Host Reboot" boot test.
[Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet}
# Description of argument(s):
# stack_mode If stack_mode is set to "skip", each test
# specified in the boot_stack is only
# performed if the machine is not already in
# the state that would normally result from
# running the given boot test. Otherwise,
# the test is skipped. If stack_mode is set
# to "normal", all tests from the boot_stack
# are performed. "skip" mode is useful when
# you simply want the machine in a desired
# state. The default value is the global
# value of "${stack_mode}"
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Redfish Host Reboot
... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet}
Run Key U ${cmd_buf}
Smart Power Off
[Documentation] Do a smart power off.
[Arguments] ${quiet}=${QUIET}
# A 'Smart Power Off' consists of a 'REST Power Off' with recovery.
# Namely, if the 'REST Power Off' fails, a 'REST Hard Power Off' will
# be attempted.
# Description of argument(s):
# quiet If this parameter is set to ${1}, this
# keyword will print only essential
# information. The default value is the
# global value of "${quiet}"
# OBMC Boot Test will restore global quiet to initial global value.
# Unfortunately, that restore affects our local quiet so we must
# preserve it.
${loc_quiet}= Set Variable ${quiet}
${cmd_buf}= Catenate REST Power Off \ stack_mode=skip
... \ \ quiet=${loc_quiet}
${status} ${ret_values}= Run Key U ${cmd_buf} ignore=${1}
... quiet=${loc_quiet}
Run Keyword If '${status}' == 'PASS' Return From Keyword
${cmd_buf}= Catenate REST Hard Power Off \ stack_mode=skip
... \ \ quiet=${loc_quiet}
Run Key U ${cmd_buf} quiet=${loc_quiet}