blob: cb203f1e5ba96675d139e765ec8fbf389b57d7c8 [file] [log] [blame]
*** Settings ***
Documentation This module provides general keywords for dump.
Library bmc_ssh_utils.py
*** Variables ***
*** Keywords ***
Create User Initiated Dump
[Documentation] Generate user initiated dump and return
... the dump id number (e.g., "5"). Optionally return EMPTY
... if out of dump space.
[Arguments] ${check_out_of_space}=${False}
# Description of Argument(s):
# check_out_of_space If ${False}, a dump will be created and
# its dump_id will be returned.
# If ${True}, either the dump_id will be
# returned, or the value ${EMPTY} will be
# returned if out of dump space was
# detected when creating the dump.
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Set Global Variable ${DUMP_URI} /xyz/openbmc_project/dump/
${data}= Create Dictionary data=@{EMPTY}
${resp}= OpenBMC Post Request
... ${DUMP_URI}action/CreateDump data=${data} quiet=${1}
Run Keyword If '${check_out_of_space}' == '${False}'
... Run Keyword And Return Get The Dump Id ${resp}
... ELSE
... Run Keyword And Return Check For Too Many Dumps ${resp}
Get The Dump Id
[Documentation] Wait for the dump to be created. Return the
... dump id number (e.g., "5").
[Arguments] ${resp}
# Description of Argument(s):
# resp Response object from action/Create Dump attempt.
# Example object:
# {
# "data": 5,
# "message": "200 OK",
# "status": "ok"
# },
# The "data" field conveys the id number of the created dump.
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
${json}= To JSON ${resp.content}
Run Keyword If ${json["data"]} == ${None}
... Fail Dump id returned null.
${dump_id}= Set Variable ${json["data"]}
Wait Until Keyword Succeeds 3 min 15 sec Check Dump Existence
... ${dump_id}
[Return] ${dump_id}
Check For Too Many Dumps
[Documentation] Return the dump_id number, or return ${EMPTY} if dump
... creation failed due to too many dumps.
[Arguments] ${resp}
# Description of Argument(s):
# resp Response object from action/Create Dump attempt.
# Example object if there are too many dumps:
# {
# "data": {
# "description": "xyz.openbmc_project.Dump.Create.Error.QuotaExceeded"
# },
# "message": "Dump not captured due to a cap.",
# "status": "error"
# }
# If dump was created normally, return the dump_id number.
Run Keyword If '${resp.status_code}' == '${HTTP_OK}'
... Run Keyword And Return Get The Dump Id ${resp}
${json}= To JSON ${resp.content}
${exception}= Set Variable ${json["message"]}
${at_capacity}= Set Variable Dump not captured due to a cap
${too_many_dumps}= Evaluate $at_capacity in $exception
Printn
Rprint Vars exception too_many_dumps
# If there are too many dumps, return ${EMPTY}, otherwise Fail.
${status}= Run Keyword If ${too_many_dumps} Set Variable ${EMPTY}
... ELSE Fail msg=${exception}.
[Return] ${status}
Verify No Dump In Progress
[Documentation] Verify no dump in progress.
${dump_progress} ${stderr} ${rc}= BMC Execute Command ls /tmp
Should Not Contain ${dump_progress} obmcdump
Check Dump Existence
[Documentation] Verify if given dump exist.
[Arguments] ${dump_id}
# Description of Argument(s):
# dump_id An integer value that identifies a particular dump
# object(e.g. 1, 3, 5).
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}${dump_id}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Delete BMC Dump
[Documentation] Deletes a given bmc dump.
[Arguments] ${dump_id}
# Description of Argument(s):
# dump_id An integer value that identifies a particular dump (e.g. 1, 3).
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/
${data}= Create Dictionary data=@{EMPTY}
${resp}= OpenBMC Post Request
... ${DUMP_ENTRY_URI}${dump_id}/action/Delete data=${data}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Delete All Dumps
[Documentation] Delete all dumps.
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/
# Check if dump entries exist, if not return.
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}list quiet=${1}
Return From Keyword If ${resp.status_code} == ${HTTP_NOT_FOUND}
# Get the list of dump entries and delete them all.
${dump_entries}= Get URL List ${DUMP_ENTRY_URI}
FOR ${entry} IN @{dump_entries}
${dump_id}= Fetch From Right ${entry} /
Delete BMC Dump ${dump_id}
END
Redfish Delete BMC Dump
[Documentation] Deletes a given BMC dump via Redfish..
[Arguments] ${dump_id}
# Description of Argument(s):
# dump_id An integer value that identifies a particular dump (e.g. 1, 3).
Redfish.Delete /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_id}
Redfish Delete All BMC Dumps
[Documentation] Delete all BMC dumps via Redfish.
# Check if dump entries exist, if not return.
${resp}= Redfish.Get /redfish/v1/Managers/bmc/LogServices/Dump/Entries
Return From Keyword If ${resp.dict["Members@odata.count"]} == ${0}
Redfish.Post /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.ClearLog
Delete All BMC Dump
[Documentation] Delete all BMC dump entries using "DeleteAll" interface.
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Set Global Variable ${DUMP_URI} /xyz/openbmc_project/dump/
${data}= Create Dictionary data=@{EMPTY}
${resp}= Openbmc Post Request ${DUMP_URI}action/DeleteAll data=${data}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Dump Should Not Exist
[Documentation] Verify that BMC dumps do not exist.
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/
${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}list quiet=${1}
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
Check Existence Of BMC Dump File
[Documentation] Verify existence of BMC dump file.
[Arguments] ${dump_id}
# Description of argument(s):
# dump_id BMC dump identifier
${dump_check_cmd}= Set Variable
... ls /var/lib/phosphor-debug-collector/dumps
# Output of sample BMC Execute command with '2' as dump id is as follows
# ls /var/lib/phosphor-debug-collector/dumps/2
# obmcdump_2_XXXXXXXXXX.tar.xz
${file_there} ${stderr} ${rc}= BMC Execute Command
... ${dump_check_cmd}/${dump_id}
Should End With ${file_there} tar.xz msg=BMC dump file not found.
Get Dump Entries
[Documentation] Return dump entries list.
${resp}= OpenBMC Get Request ${DUMP_URI}
Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}'
... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/
${dump_entries}= Get URL List ${DUMP_ENTRY_URI}
[Return] ${dump_entries}
Trigger Core Dump
[Documentation] Trigger core dump.
# Find the pid of the active ipmid and kill it.
${cmd_buf}= Catenate kill -s SEGV $(ps | egrep ' ipmid$' |
... egrep -v grep | \ cut -c1-6)
${cmd_output} ${stderr} ${rc}= BMC Execute Command ${cmd_buf}
Should Be Empty ${stderr} msg=BMC execute command error.
Should Be Equal As Integers ${rc} ${0}
... msg=BMC execute command return code is not zero.
Create User Initiated BMC Dump Using Redfish
[Documentation] Trigger user initiated BMC dump via Redfish and return task id.
${payload}= Create Dictionary DiagnosticDataType=Manager
${resp}= Redfish.Post
... /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData
... body=${payload} valid_status_codes=[${HTTP_ACCEPTED}, ${HTTP_OK}]
# Example of response from above Redfish POST request.
# "@odata.id": "/redfish/v1/TaskService/Tasks/0",
# "@odata.type": "#Task.v1_4_3.Task",
# "Id": "0",
# "TaskState": "Running",
# "TaskStatus": "OK"
${task_id}= Set Variable ${resp.dict['Id']}
[Return] ${task_id}
Auto Generate BMC Dump
[Documentation] Auto generate BMC dump.
${stdout} ${stderr} ${rc}=
... BMC Execute Command
... busctl --verbose call xyz.openbmc_project.Dump.Manager
... /xyz/openbmc_project/dump/bmc xyz.openbmc_project.Dump.Create CreateDump a{ss} 0
[Return] ${stdout} ${stderr} ${rc}
Get Dump Size
[Documentation] Get dump size.
[Arguments] ${dump_uri}
# Description of argument(s):
# dump_uri Dump URI
# (Eg. /xyz/openbmc_project/dump/bmc/entry/1).
# Example of Dump entry.
# "data": {
# "CompletedTime": 1616760931,
# "Elapsed": 1616760931,
# "OffloadUri": "",
# "Offloaded": false,
# "Password": "",
# "Size": 3056,
# "SourceDumpId": 117440513,
# "StartTime": 1616760931,
# "Status": "xyz.openbmc_project.Common.Progress.OperationStatus.Completed",
# "VSPString": ""
# },
Log ${dump_uri}
${dump_data}= Redfish.Get Properties ${dump_uri}
[Return] ${dump_data["data"]["Size"]}
Get Dump ID
[Documentation] Return dump ID.
[Arguments] ${task_id}
# Description of argument(s):
# task_id Task ID.
# Example of HttpHeaders field of task details.
# "Payload": {
# "HttpHeaders": [
# "Host: <BMC_IP>",
# "Accept-Encoding: identity",
# "Connection: Keep-Alive",
# "Accept: */*",
# "Content-Length: 33",
# "Location: /redfish/v1/Managers/bmc/LogServices/Dump/Entries/2"]
# ],
# "HttpOperation": "POST",
# "JsonBody": "{\"DiagnosticDataType\":\"Manager\"}",
# "TargetUri":
# "/redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData"
# }
${task_dict}= Redfish.Get Properties /redfish/v1/TaskService/Tasks/${task_id}
${key} ${value}= Set Variable ${task_dict["Payload"]["HttpHeaders"][-1].split(":")}
Run Keyword If '${key}' != 'Location' Fail
[Return] ${value.split('/')[-1]}
Get Task Status
[Documentation] Return task status.
[Arguments] ${task_id}
# Description of argument(s):
# task_id Task ID.
${resp}= Redfish.Get Properties /redfish/v1/TaskService/Tasks/${task_id}
[Return] ${resp['TaskState']}
Check Task Completion
[Documentation] Check if the task is complete.
[Arguments] ${task_id}
# Description of argument(s):
# task_id Task ID.
${status}= Get Task Status ${task_id}
Run Keyword Unless '${status}' == 'Cancelled' or '${status}' == 'Completed'
... Fail Task is still running.
[Return] ${status}
Get Dump ID And Status
[Documentation] Return dump ID and status.
[Arguments] ${task_id}
# Description of argument(s):
# task_id Task ID.
${task_status}= Wait Until Keyword Succeeds 10 min 15 sec Check Task Completion ${task_id}
${dump_id}= Run Keyword If '${task_status}' == 'Completed' Get Dump ID ${task_id}
... ELSE Set Variable None
[Return] ${dump_id} ${task_status}