| *** Settings *** |
| Documentation Validate IPMI sensor IDs using Redfish. |
| |
| Resource ../lib/ipmi_client.robot |
| Resource ../lib/openbmc_ffdc.robot |
| Resource ../lib/boot_utils.robot |
| Library ../lib/ipmi_utils.py |
| Variables ../data/ipmi_raw_cmd_table.py |
| |
| Test Setup Redfish.Login |
| Test Teardown Run Keywords FFDC On Test Case Fail AND |
| ... Redfish.Logout |
| |
| |
| *** Variables *** |
| ${allowed_temp_diff} ${2} |
| ${allowed_power_diff} ${10} |
| |
| |
| *** Test Cases *** |
| |
| Verify IPMI Temperature Readings using Redfish |
| [Documentation] Verify temperatures from IPMI sensor reading command using Redfish. |
| [Tags] Verify_IPMI_Temperature_Readings_using_Redfish |
| [Template] Get Temperature Reading And Verify In Redfish |
| |
| # command_type sensor_id member_id |
| IPMI pcie pcie |
| IPMI ambient ambient |
| |
| |
| Verify DCMI Temperature Readings using Redfish |
| [Documentation] Verify temperatures from DCMI sensor reading command using Redfish. |
| [Tags] Verify_DCMI_Temperature_Readings_using_Redfish |
| [Template] Get Temperature Reading And Verify In Redfish |
| |
| # command_type sensor_id member_id |
| DCMI pcie pcie |
| DCMI ambient ambient |
| |
| |
| Test Ambient Temperature Via IPMI |
| [Documentation] Test ambient temperature via IPMI and verify using Redfish. |
| [Tags] Test_Ambient_Temperature_Via_IPMI |
| |
| # Example of IPMI dcmi get_temp_reading output: |
| # Entity ID Entity Instance Temp. Readings |
| # Inlet air temperature(40h) 1 +19 C |
| # CPU temperature sensors(41h) 5 +51 C |
| # CPU temperature sensors(41h) 6 +50 C |
| # CPU temperature sensors(41h) 7 +50 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 9 +50 C |
| # CPU temperature sensors(41h) 10 +48 C |
| # CPU temperature sensors(41h) 11 +49 C |
| # CPU temperature sensors(41h) 12 +47 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 16 +51 C |
| # CPU temperature sensors(41h) 24 +50 C |
| # CPU temperature sensors(41h) 32 +43 C |
| # CPU temperature sensors(41h) 40 +43 C |
| # Baseboard temperature sensors(42h) 1 +35 C |
| |
| ${temp_reading}= Run IPMI Standard Command dcmi get_temp_reading -N 10 |
| Should Contain ${temp_reading} Inlet air temperature |
| ... msg="Unable to get inlet temperature via DCMI". |
| |
| ${ambient_temp_line}= |
| ... Get Lines Containing String ${temp_reading} |
| ... Inlet air temperature case-insensitive |
| |
| ${ambient_temp_ipmi}= Set Variable ${ambient_temp_line.split('+')[1].strip(' C')} |
| |
| # Example of ambient temperature via Redfish |
| |
| #"@odata.id": "/redfish/v1/Chassis/chassis/Thermal#/Temperatures/0", |
| #"@odata.type": "#Thermal.v1_3_0.Temperature", |
| #"LowerThresholdCritical": 0.0, |
| #"LowerThresholdNonCritical": 0.0, |
| #"MaxReadingRangeTemp": 0.0, |
| #"MemberId": "ambient", |
| #"MinReadingRangeTemp": 0.0, |
| #"Name": "ambient", |
| #"ReadingCelsius": 24.987000000000002, |
| #"Status": { |
| #"Health": "OK", |
| #"State": "Enabled" |
| #}, |
| #"UpperThresholdCritical": 35.0, |
| #"UpperThresholdNonCritical": 25.0 |
| |
| ${ambient_temp_redfish}= Get Temperature Reading From Redfish ambient |
| |
| ${ipmi_redfish_temp_diff}= |
| ... Evaluate abs(${ambient_temp_redfish} - ${ambient_temp_ipmi}) |
| |
| Should Be True ${ipmi_redfish_temp_diff} <= ${allowed_temp_diff} |
| ... msg=Ambient temperature above allowed threshold ${allowed_temp_diff}. |
| |
| |
| Test Power Reading Via IPMI With Host Off |
| [Documentation] Verify power reading via IPMI with host in off state |
| [Tags] Test_Power_Reading_Via_IPMI_With_Host_Off |
| |
| Redfish Power Off stack_mode=skip |
| |
| ${ipmi_reading}= Get IPMI Power Reading |
| |
| Should Be Equal ${ipmi_reading['instantaneous_power_reading']} 0 |
| ... msg=Power reading not zero when power is off. |
| |
| |
| Test Power Reading Via IPMI With Host Booted |
| [Documentation] Test power reading via IPMI with host in booted state and |
| ... verify using Redfish. |
| [Tags] Test_Power_Reading_Via_IPMI_With_Host_Booted |
| |
| IPMI Power On stack_mode=skip |
| |
| Wait Until Keyword Succeeds 2 min 30 sec Verify Power Reading Using IPMI And Redfish |
| |
| |
| Test Baseboard Temperature Via IPMI |
| [Documentation] Test baseboard temperature via IPMI and verify using Redfish. |
| [Tags] Test_Baseboard_Temperature_Via_IPMI |
| |
| # Example of IPMI dcmi get_temp_reading output: |
| # Entity ID Entity Instance Temp. Readings |
| # Inlet air temperature(40h) 1 +19 C |
| # CPU temperature sensors(41h) 5 +51 C |
| # CPU temperature sensors(41h) 6 +50 C |
| # CPU temperature sensors(41h) 7 +50 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 9 +50 C |
| # CPU temperature sensors(41h) 10 +48 C |
| # CPU temperature sensors(41h) 11 +49 C |
| # CPU temperature sensors(41h) 12 +47 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 16 +51 C |
| # CPU temperature sensors(41h) 24 +50 C |
| # CPU temperature sensors(41h) 32 +43 C |
| # CPU temperature sensors(41h) 40 +43 C |
| # Baseboard temperature sensors(42h) 1 +35 C |
| |
| ${temp_reading}= Run IPMI Standard Command dcmi get_temp_reading -N 10 |
| Should Contain ${temp_reading} Baseboard temperature sensors |
| ... msg="Unable to get baseboard temperature via DCMI". |
| ${baseboard_temp_line}= |
| ... Get Lines Containing String ${temp_reading} |
| ... Baseboard temperature case-insensitive=True |
| |
| ${baseboard_temp_ipmi}= Set Variable ${baseboard_temp_line.split('+')[1].strip(' C')} |
| |
| # Example of Baseboard temperature via Redfish |
| |
| #"@odata.id": "/redfish/v1/Chassis/chassis/Thermal#/Temperatures/9", |
| #"@odata.type": "#Thermal.v1_3_0.Temperature", |
| #"LowerThresholdCritical": 0.0, |
| #"LowerThresholdNonCritical": 0.0, |
| #"MaxReadingRangeTemp": 0.0, |
| #"MemberId": "pcie", |
| #"MinReadingRangeTemp": 0.0, |
| #"Name": "pcie", |
| #"ReadingCelsius": 28.687, |
| #"Status": { |
| #"Health": "OK", |
| #"State": "Enabled" |
| #}, |
| #"UpperThresholdCritical": 70.0, |
| #"UpperThresholdNonCritical": 60.0 |
| |
| ${baseboard_temp_redfish}= Get Temperature Reading From Redfish pcie |
| |
| Should Be True |
| ... ${baseboard_temp_redfish} - ${baseboard_temp_ipmi} <= ${allowed_temp_diff} |
| ... msg=Baseboard temperature above allowed threshold ${allowed_temp_diff}. |
| |
| |
| Test Power Reading Via IPMI Raw Command |
| [Documentation] Test power reading via IPMI raw command and verify |
| ... using Redfish. |
| [Tags] Test_Power_Reading_Via_IPMI_Raw_Command |
| |
| IPMI Power On stack_mode=skip |
| |
| Wait Until Keyword Succeeds 2 min 30 sec Verify Power Reading Via Raw Command |
| |
| |
| Verify CPU Present |
| [Documentation] Verify the IPMI sensor for CPU present using Redfish. |
| [Tags] Verify_CPU_Present |
| [Template] Enable Present Bit Via IPMI and Verify Using Redfish |
| |
| # sensor_id component |
| 0x5a cpu0 |
| |
| |
| Verify CPU Not Present |
| [Documentation] Verify the IPMI sensor for CPU not present using Redfish. |
| [Tags] Verify_CPU_Not_Present |
| [Template] Disable Present Bit Via IPMI and Verify Using Redfish |
| |
| # sensor_id component |
| 0x5a cpu0 |
| |
| |
| Verify GPU Present |
| [Documentation] Verify the IPMI sensor for GPU present using Redfish. |
| [Tags] Verify_GPU_Present |
| [Template] Enable Present Bit Via IPMI and Verify Using Redfish |
| |
| # sensor_id component |
| 0xC5 gv100card0 |
| |
| |
| Verify GPU Not Present |
| [Documentation] Verify the IPMI sensor for GPU not present using Redfish. |
| [Tags] Verify_GPU_Not_Present |
| [Template] Disable Present Bit Via IPMI and Verify Using Redfish |
| |
| # sensor_id component |
| 0xC5 gv100card0 |
| |
| |
| Test Sensor Threshold Via IPMI |
| [Documentation] Test sensor threshold via IPMI and verify using Redfish. |
| [Tags] Test_Sensor_Threshold_Via_IPMI |
| [Template] Verify Power Supply Sensor Threshold |
| |
| # threshold_id component |
| Upper Non-Critical UpperThresholdNonCritical |
| Upper Critical UpperThresholdCritical |
| Lower Non-Critical LowerThresholdNonCritical |
| Lower Critical LowerThresholdCritical |
| |
| |
| *** Keywords *** |
| |
| Get Temperature Reading And Verify In Redfish |
| [Documentation] Get IPMI or DCMI sensor reading and verify in Redfish. |
| [Arguments] ${command_type} ${sensor_id} ${member_id} |
| |
| # Description of argument(s): |
| # command_type Type of command used to get sensor data (eg. IPMI, DCMI). |
| # sensor_id Sensor id used to get reading in IPMI or DCMI. |
| # member_id Member id of sensor data in Redfish. |
| |
| ${ipmi_value}= Run Keyword If '${command_type}' == 'IPMI' Get IPMI Sensor Reading ${sensor_id} |
| ... ELSE Get DCMI Sensor Reading ${sensor_id} |
| |
| ${redfish_value}= Get Temperature Reading From Redfish ${member_id} |
| |
| Valid Range ${ipmi_value} ${redfish_value-1.000} ${redfish_value+1.000} |
| |
| |
| Get IPMI Sensor Reading |
| [Documentation] Get reading from IPMI sensor reading command. |
| [Arguments] ${sensor_id} |
| |
| # Description of argument(s): |
| # sensor_id Sensor id used to get reading in IPMI. |
| |
| ${data}= Run IPMI Standard Command sensor reading ${sensor_id} |
| |
| # Example reading: |
| # pcie | 28.500 |
| |
| ${sensor_value}= Set Variable ${data.split('| ')[1].strip()} |
| [Return] ${sensor_value} |
| |
| |
| Get DCMI Sensor Reading |
| [Documentation] Get reading from DCMI sensors command. |
| [Arguments] ${sensor_id} |
| |
| # Description of argument(s): |
| # sensor_id Sensor id used to get reading in DCMI. |
| |
| ${data}= Run IPMI Standard Command dcmi sensors |
| ${sensor_data}= Get Lines Containing String ${data} ${sensor_id} |
| |
| # Example reading: |
| # Record ID 0x00fd: pcie | 28.50 degrees C | ok |
| |
| ${sensor_value}= Set Variable ${sensor_data.split(' | ')[1].strip('degrees C').strip()} |
| [Return] ${sensor_value} |
| |
| |
| Get Temperature Reading From Redfish |
| [Documentation] Get temperature reading from Redfish. |
| [Arguments] ${member_id} |
| |
| # Description of argument(s): |
| # member_id Member id of temperature. |
| |
| @{redfish_readings}= Redfish.Get Attribute /redfish/v1/Chassis/chassis/Thermal Temperatures |
| FOR ${data} IN @{redfish_readings} |
| ${redfish_value}= Set Variable If '${data}[MemberId]' == '${member_id}' |
| ... ${data}[ReadingCelsius] |
| Exit For Loop If '${data}[MemberId]' == '${member_id}' |
| END |
| [Return] ${redfish_value} |
| |
| |
| Verify Power Reading Using IPMI And Redfish |
| [Documentation] Verify power reading using IPMI and Redfish. |
| |
| # Example of power reading command output via IPMI. |
| # Instantaneous power reading: 235 Watts |
| # Minimum during sampling period: 235 Watts |
| # Maximum during sampling period: 235 Watts |
| # Average power reading over sample period: 235 Watts |
| # IPMI timestamp: Thu Jan 1 00:00:00 1970 |
| # Sampling period: 00000000 Seconds. |
| # Power reading state is: deactivated |
| |
| ${ipmi_reading}= Get IPMI Power Reading |
| |
| ${power_uri_list}= redfish_utils.Get Members URI /redfish/v1/Chassis/ PowerControl |
| Log List ${power_uri_list} |
| |
| # Power entries could be seen across different redfish path, remove the URI |
| # where the attribute is non-existent. |
| # Example: |
| # ['/redfish/v1/Chassis/chassis/Power', |
| # '/redfish/v1/Chassis/motherboard/Power'] |
| FOR ${idx} IN @{power_uri_list} |
| ${power}= redfish_utils.Get Attribute ${idx} PowerControl |
| Log Dictionary ${power[0]} |
| |
| # Ensure the path does have the attribute else set to EMPTY as default to skip. |
| ${value}= Get Variable Value ${power[0]['PowerConsumedWatts']} ${EMPTY} |
| Run Keyword If "${value}" == "${EMPTY}" |
| ... Remove Values From List ${power_uri_list} ${idx} |
| |
| # Check the next available element in the list. |
| Continue For Loop If "${value}" == "${EMPTY}" |
| |
| ${ipmi_redfish_power_diff}= |
| ... Evaluate abs(${${power[0]['PowerConsumedWatts']}} - ${ipmi_reading['instantaneous_power_reading']}) |
| Should Be True ${ipmi_redfish_power_diff} <= ${allowed_power_diff} |
| ... msg=Power reading above allowed threshold ${allowed_power_diff}. |
| END |
| |
| # Double check, the validation has at least one valid path. |
| Should Not Be Empty ${power_uri_list} |
| ... msg=Should contain at least one element in the list. |
| |
| |
| Verify Power Reading Via Raw Command |
| [Documentation] Get dcmi power reading via IPMI raw command. |
| |
| ${ipmi_raw_output}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['power_reading']['Get'][0]} |
| |
| ${power_reading_ipmi}= Set Variable ${ipmi_raw_output.split()[1]} |
| ${power_reading_ipmi}= |
| ... Convert To Integer 0x${power_reading_ipmi} |
| |
| # Example of power reading via Redfish |
| # "@odata.id": "/redfish/v1/Chassis/chassis/Power#/PowerControl/0", |
| # "@odata.type": "#Power.v1_0_0.PowerControl", |
| # "MemberId": "0", |
| # "Name": "Chassis Power Control", |
| # "PowerConsumedWatts": 145.0, |
| |
| ${power}= Redfish.Get Properties /redfish/v1/Chassis/chassis/Power |
| ${redfish_reading}= Set Variable ${power['PowerControl'][0]['PowerConsumedWatts']} |
| |
| ${ipmi_redfish_power_diff}= |
| ... Evaluate abs(${redfish_reading} - ${power_reading_ipmi}) |
| |
| Should Be True ${ipmi_redfish_power_diff} <= ${allowed_power_diff} |
| ... msg=Power reading above allowed threshold ${allowed_power_diff}. |
| |
| |
| Enable Present Bit Via IPMI and Verify Using Redfish |
| [Documentation] Enable present bit of sensor via IPMI and verify using Redfish. |
| [Arguments] ${sensor_id} ${component} |
| |
| # Description of argument(s): |
| # sensor_id The sensor id of IPMI sensor. |
| # component The Redfish component of IPMI sensor. |
| |
| Run IPMI Command |
| ... 0x04 0x30 ${sensor_id} 0xa9 0x00 0x80 0x00 0x00 0x00 0x00 0x20 0x00 |
| |
| # Example of CPU state via Redfish |
| |
| #"Name": "Processor", |
| #"ProcessorArchitecture": "Power", |
| #"ProcessorType": "CPU", |
| #"Status": { |
| # "Health": "OK", |
| # "State": "Enabled" |
| #} |
| |
| # Python module: get_endpoint_path_list(resource_path, end_point_prefix) |
| ${processor_list}= redfish_utils.Get Endpoint Path List /redfish/v1/Systems/ Processors |
| |
| ${redfish_value}= Redfish.Get Properties ${processor_list[0]}/${component} |
| Should Be True '${redfish_value['Status']['State']}' == 'Enabled' |
| |
| |
| Disable Present Bit Via IPMI and Verify Using Redfish |
| [Documentation] Disable present bit of sensor via IPMI and verify using Redfish. |
| [Arguments] ${sensor_id} ${component} |
| |
| # Description of argument(s): |
| # sensor_id The sensor id of IPMI sensor. |
| # component The Redfish component of IPMI sensor. |
| |
| Run IPMI Command |
| ... 0x04 0x30 ${sensor_id} 0xa9 0x00 0x00 0x00 0x80 0x00 0x00 0x20 0x00 |
| |
| # Example of CPU state via Redfish |
| |
| #"Name": "Processor", |
| #"ProcessorArchitecture": "Power", |
| #"ProcessorType": "CPU", |
| #"Status": { |
| # "Health": "OK", |
| # "State": "Absent" |
| #} |
| |
| # Python module: get_endpoint_path_list(resource_path, end_point_prefix) |
| ${processor_list}= redfish_utils.Get Endpoint Path List /redfish/v1/Systems/ Processors |
| |
| ${redfish_value}= Redfish.Get Properties ${processor_list[0]}/${component} |
| Should Be True '${redfish_value['Status']['State']}' == 'Absent' |
| |
| |
| Verify Power Supply Sensor Threshold |
| [Documentation] Get power supply sensor threshold value via IPMI and verify using Redfish. |
| [Arguments] ${ipmi_threshold_id} ${redfish_threshold_id} |
| |
| # Description of argument(s): |
| # ipmi_threshold_id The sensor threshold component of IPMI sensor. |
| # redfish_threshold_id The sensor threshold component of Redfish sensor. |
| |
| |
| # Example of ipmi sensor output |
| # Locating sensor record... |
| # Sensor ID : ps0_input_voltag (0xf7) |
| # Entity ID : 10.19 |
| # Sensor Type (Threshold) : Voltage |
| # Sensor Reading : 208 (+/- 0) Volts |
| # Status : ok |
| # Lower Non-Recoverable : na |
| # Lower Critical : 180.000 |
| # Lower Non-Critical : 200.000 |
| # Upper Non-Critical : 290.000 |
| # Upper Critical : 300.000 |
| # Upper Non-Recoverable : na |
| # Positive Hysteresis : Unspecified |
| # Negative Hysteresis : Unspecified |
| |
| |
| ${ipmi_sensor_output}= Run External IPMI Standard Command sensor get ps0_input_voltag |
| ${ipmi_threshold_output}= Get Lines Containing String ${ipmi_sensor_output} ${ipmi_threshold_id} |
| ${ipmi_threshold_reading}= Fetch From Right ${ipmi_threshold_output} :${SPACE} |
| |
| ${ipmi_threshold_reading}= Set Variable If '${ipmi_threshold_reading}' == 'na' |
| ... ${0} ${ipmi_threshold_reading} |
| |
| # Example of redfish sensor output |
| # "@odata.id": "/redfish/v1/Chassis/chassis/Power#/Voltages/0", |
| # "@odata.type": "#Power.v1_0_0.Voltage", |
| # "LowerThresholdCritical": 180.0, |
| # "LowerThresholdNonCritical": 200.0, |
| # "MaxReadingRange": 0.0, |
| # "MemberId": "ps0_input_voltage", |
| # "MinReadingRange": 0.0, |
| # "Name": "ps0 input voltage", |
| # "ReadingVolts": 209.5, |
| # "Status": { |
| # "Health": "OK", |
| # "State": "Enabled" |
| # }, |
| # "UpperThresholdCritical": 300.0, |
| # "UpperThresholdNonCritical": 290.0 |
| |
| @{redfish_readings}= Redfish.Get Attribute /redfish/v1/Chassis/chassis/Power Voltages |
| FOR ${data} IN @{redfish_readings} |
| Run keyword if '${data}[MemberId]' == 'ps0_input_voltage' |
| ... Should Be Equal As Numbers ${data['${redfish_threshold_id}']} ${ipmi_threshold_reading} |
| END |