| *** Settings *** |
| Documentation Network interface IPv6 configuration and verification |
| ... tests. |
| |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Resource ../../lib/bmc_ipv6_utils.robot |
| Resource ../../lib/external_intf/vmi_utils.robot |
| Resource ../../lib/bmc_network_utils.robot |
| Library ../../lib/bmc_network_utils.py |
| Library Collections |
| Library Process |
| |
| Test Setup Test Setup Execution |
| Test Teardown Test Teardown Execution |
| Suite Setup Suite Setup Execution |
| Suite Teardown Redfish.Logout |
| |
| Test Tags BMC_IPv6 |
| |
| *** Variables *** |
| ${test_ipv6_addr} 2001:db8:3333:4444:5555:6666:7777:8888 |
| ${test_ipv6_invalid_addr} 2001:db8:3333:4444:5555:6666:7777:JJKK |
| ${test_ipv6_addr1} 2001:db8:3333:4444:5555:6666:7777:9999 |
| ${invalid_hexadec_ipv6} x:x:x:x:x:x:10.5.5.6 |
| ${ipv6_multi_short} 2001::33::111 |
| # Valid prefix length is a integer ranges from 1 to 128. |
| ${test_prefix_length} 64 |
| ${ipv6_gw_addr} 2002:903:15F:32:9:3:32:1 |
| ${prefix_length_def} None |
| ${invalid_staticv6_gateway} 9.41.164.1 |
| ${linklocal_addr_format} fe80::[0-9a-f:]+$ |
| ${new_mac_addr} AA:E2:84:14:28:79 |
| |
| *** Test Cases *** |
| |
| Get IPv6 Address And Verify |
| [Documentation] Get IPv6 Address And Verify. |
| [Tags] Get_IPv6_Address_And_Verify |
| |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 On BMC ${ipv6_network_configuration['Address']} |
| END |
| |
| |
| Get PrefixLength And Verify |
| [Documentation] Get IPv6 prefix length and verify. |
| [Tags] Get_PrefixLength_And_Verify |
| |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 On BMC ${ipv6_network_configuration['PrefixLength']} |
| END |
| |
| |
| Get IPv6 Default Gateway And Verify |
| [Documentation] Get IPv6 default gateway and verify. |
| [Tags] Get_IPv6_Default_Gateway_And_Verify |
| |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ${ipv6_gateway}= Get From Dictionary ${resp.dict} IPv6DefaultGateway |
| Verify IPv6 Default Gateway On BMC ${ipv6_gateway} |
| |
| |
| Verify All Configured IPv6 And PrefixLength On BMC |
| [Documentation] Verify IPv6 address and its prefix length on BMC. |
| [Tags] Verify_All_Configured_IPv6_And_PrefixLength_On_BMC |
| |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 And PrefixLength ${ipv6_network_configuration['Address']} |
| ... ${ipv6_network_configuration['PrefixLength']} |
| END |
| |
| |
| Configure IPv6 Address And Verify |
| [Documentation] Configure IPv6 address and verify. |
| [Tags] Configure_IPv6_Address_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IPv6 Address ${test_ipv6_addr} AND Test Teardown Execution |
| [Template] Configure IPv6 Address On BMC |
| |
| |
| # IPv6 address Prefix length |
| ${test_ipv6_addr} ${test_prefix_length} |
| |
| |
| Delete IPv6 Address And Verify |
| [Documentation] Delete IPv6 address and verify. |
| [Tags] Delete_IPv6_Address_And_Verify |
| |
| Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} |
| |
| Delete IPv6 Address ${test_ipv6_addr} |
| |
| |
| Modify IPv6 Address And Verify |
| [Documentation] Modify IPv6 address and verify. |
| [Tags] Modify_IPv6_Address_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IPv6 Address ${test_ipv6_addr1} AND Test Teardown Execution |
| |
| Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} |
| |
| Modify IPv6 Address ${test_ipv6_addr} ${test_ipv6_addr1} ${test_prefix_length} |
| |
| |
| Verify Persistency Of IPv6 After BMC Reboot |
| [Documentation] Verify persistency of IPv6 after BMC reboot. |
| [Tags] Verify_Persistency_Of_IPv6_After_BMC_Reboot |
| [Teardown] Run Keywords |
| ... Delete IPv6 Address ${test_ipv6_addr} AND Test Teardown Execution |
| |
| Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} |
| |
| Redfish OBMC Reboot (off) stack_mode=skip |
| |
| # Verifying persistency of IPv6. |
| Verify IPv6 On BMC ${test_ipv6_addr} |
| |
| |
| Enable SLAAC On BMC And Verify |
| [Documentation] Enable SLAAC on BMC and verify. |
| [Tags] Enable_SLAAC_On_BMC_And_Verify |
| |
| Set SLAAC Configuration State And Verify ${True} |
| |
| |
| Enable DHCPv6 Property On BMC And Verify |
| [Documentation] Enable DHCPv6 property on BMC and verify. |
| [Tags] Enable_DHCPv6_Property_On_BMC_And_Verify |
| |
| Set And Verify DHCPv6 Property Enabled |
| |
| |
| Disable DHCPv6 Property On BMC And Verify |
| [Documentation] Disable DHCPv6 property on BMC and verify. |
| [Tags] Disable_DHCPv6_Property_On_BMC_And_Verify |
| |
| Set And Verify DHCPv6 Property Disabled |
| |
| |
| Verify Persistency Of DHCPv6 On Reboot |
| [Documentation] Verify persistency of DHCPv6 property on reboot. |
| [Tags] Verify_Persistency_Of_DHCPv6_On_Reboot |
| |
| Set And Verify DHCPv6 Property Enabled |
| Redfish OBMC Reboot (off) stack_mode=skip |
| Verify DHCPv6 Property Enabled |
| |
| |
| Configure Invalid Static IPv6 And Verify |
| [Documentation] Configure invalid static IPv6 and verify. |
| [Tags] Configure_Invalid_Static_IPv6_And_Verify |
| [Template] Configure IPv6 Address On BMC |
| |
| #invalid_ipv6 prefix length valid_status_code |
| ${ipv4_hexword_addr} ${test_prefix_length} ${HTTP_BAD_REQUEST} |
| ${invalid_hexadec_ipv6} ${test_prefix_length} ${HTTP_BAD_REQUEST} |
| ${ipv6_multi_short} ${test_prefix_length} ${HTTP_BAD_REQUEST} |
| |
| |
| |
| Configure IPv6 Static Default Gateway And Verify |
| [Documentation] Configure IPv6 static default gateway and verify. |
| [Tags] Configure_IPv6_Static_Default_Gateway_And_Verify |
| [Template] Configure IPv6 Static Default Gateway On BMC |
| |
| # static_def_gw prefix length valid_status_code |
| ${ipv6_gw_addr} ${prefix_length_def} ${HTTP_OK} |
| ${invalid_staticv6_gateway} ${test_prefix_length} ${HTTP_BAD_REQUEST} |
| |
| |
| Modify Static Default Gateway And Verify |
| [Documentation] Modify static default gateway and verify. |
| [Tags] Modify_Static_Default_Gateway_And_Verify |
| [Setup] Configure IPv6 Static Default Gateway On BMC ${ipv6_gw_addr} ${prefix_length_def} |
| |
| Modify IPv6 Static Default Gateway On BMC ${test_ipv6_addr1} ${prefix_length_def} ${HTTP_OK} ${ipv6_gw_addr} |
| |
| |
| Delete IPv6 Static Default Gateway And Verify |
| [Documentation] Delete IPv6 static default gateway and verify. |
| [Tags] Delete_IPv6_Static_Default_Gateway_And_Verify |
| [Setup] Configure IPv6 Static Default Gateway On BMC ${ipv6_gw_addr} ${prefix_length_def} |
| |
| Delete IPv6 Static Default Gateway ${ipv6_gw_addr} |
| |
| |
| Verify Coexistence Of Linklocalv6 And Static IPv6 On BMC |
| [Documentation] Verify linklocalv6 And static IPv6 both exist. |
| [Tags] Verify_Coexistence_Of_Linklocalv6_And_Static_IPv6_On_BMC |
| [Setup] Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} |
| [Teardown] Delete IPv6 Address ${test_ipv6_addr} |
| |
| Check Coexistence Of Linklocalv6 And Static IPv6 |
| |
| |
| Verify IPv6 Linklocal Address Is In Correct Format |
| [Documentation] Verify linklocal address has network part as fe80 and |
| ... host part as EUI64. |
| [Tags] Verify_IPv6_Linklocal_Address_Is_In_Correct_Format |
| |
| Check If Linklocal Address Is In Correct Format |
| |
| |
| Verify BMC Gets SLAAC Address On Enabling SLAAC |
| [Documentation] On enabling SLAAC verify SLAAC address comes up. |
| [Tags] Verify_BMC_Gets_SLAAC_Address_On_Enabling_SLAAC |
| [Setup] Set SLAAC Configuration State And Verify ${False} |
| |
| Set SLAAC Configuration State And Verify ${True} |
| Sleep ${NETWORK_TIMEOUT} |
| Check BMC Gets SLAAC Address |
| |
| |
| Enable And Verify DHCPv6 Property On Eth1 When DHCPv6 Property Enabled On Eth0 |
| [Documentation] Verify DHCPv6 on eth1 when DHCPv6 property is enabled on eth0. |
| [Tags] Enable_And_Verify_DHCPv6_Property_On_Eth1_When_DHCPv6_Property_Enabled_On_Eth0 |
| [Setup] Get The Initial DHCPv6 Settings |
| [Teardown] Run Keywords Set And Verify DHCPv6 Property ${dhcpv6_channel_1} ${1} |
| ... AND Set And Verify DHCPv6 Property ${dhcpv6_channel_2} ${2} |
| |
| Set And Verify DHCPv6 Property Enabled ${1} |
| Set And Verify DHCPv6 Property Enabled ${2} |
| |
| |
| Enable And Verify SLAAC Property On Eth1 When SLAAC Property Enabled On Eth0 |
| [Documentation] Enable and verify SLAAC property on Eth1 when SLAAC property enabled on Eth0. |
| [Tags] Enable_And_Verify_SLAAC_Property_On_Eth1_When_SLAAC_Property_Enabled_On_Eth0 |
| [Setup] Get The Initial SLAAC Settings |
| [Teardown] Run Keywords Set SLAAC Configuration State And Verify ${slaac_channel_1} [${HTTP_OK}] ${1} |
| ... AND Set SLAAC Configuration State And Verify ${slaac_channel_2} [${HTTP_OK}] ${2} |
| |
| Set SLAAC Configuration State And Verify ${True} [${HTTP_OK}] ${1} |
| Set SLAAC Configuration State And Verify ${True} [${HTTP_OK}] ${2} |
| |
| # Check all the addresses and address origins remain intact. |
| Verify All The Addresses Are Intact |
| |
| |
| Verify Autoconfig Is Present On Ethernet Interface |
| [Documentation] Verify autoconfig is present on ethernet interface. |
| [Tags] Verify_Autoconfig_Is_Present_On_Ethernet_Interface |
| |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| Should Contain ${resp.dict} StatelessAddressAutoConfig |
| |
| |
| Verify Interface ID Of SLAAC And LinkLocal Addresses Are Same |
| [Documentation] Validate interface id of SLAAC and link-local addresses are same. |
| [Tags] Verify_Interface_ID_Of_SLAAC_And_LinkLocal_Addresses_Are_Same |
| |
| @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal |
| @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= Get Address Origin List And Address For Type SLAAC |
| |
| ${linklocal_interface_id}= Get Interface ID Of IPv6 ${ipv6_linklocal_addr} |
| ${slaac_interface_id}= Get Interface ID Of IPv6 ${ipv6_slaac_addr} |
| |
| Should Be Equal ${linklocal_interface_id} ${slaac_interface_id} |
| |
| |
| Verify Persistency Of Link Local IPv6 On BMC Reboot |
| [Documentation] Verify persistency of link local on BMC reboot. |
| [Tags] Verify_Persistency_Of_Link_Local_IPv6_On_BMC_Reboot |
| |
| # Capturing the linklocal before reboot. |
| @{ipv6_address_origin_list} ${linklocal_addr_before_reboot}= |
| ... Get Address Origin List And Address For Type LinkLocal |
| |
| # Rebooting BMC. |
| Redfish OBMC Reboot (off) stack_mode=skip |
| |
| @{ipv6_address_origin_list} ${linklocal_addr_after_reboot}= |
| ... Get Address Origin List And Address For Type LinkLocal |
| |
| # Verifying the linklocal must be the same before and after reboot. |
| Should Be Equal ${linklocal_addr_before_reboot} ${linklocal_addr_after_reboot} |
| ... msg=IPv6 Linklocal address has changed after reboot. |
| |
| |
| Modify MAC and Verify BMC Reinitializing Linklocal |
| [Documentation] Modify MAC and verify BMC reinitializing linklocal. |
| [Tags] Modify_MAC_and_Verify_BMC_Reinitializing_Linklocal |
| [Teardown] Configure MAC Settings ${original_address} |
| |
| ${original_address}= Get BMC MAC Address |
| @{ipv6_addressorigin_list} ${ipv6_before_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal |
| |
| # Modify MAC Address Of Ethernet Interface. |
| Configure MAC Settings ${new_mac_addr} |
| Sleep 30s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| @{ipv6_addressorigin_list} ${ipv6_linklocal_after_addr}= Get Address Origin List And Address For Type LinkLocal |
| |
| # Verify whether the linklocal has changed and is in the the correct format. |
| Check If Linklocal Address Is In Correct Format |
| Should Not Be Equal ${ipv6_before_linklocal_addr} ${ipv6_linklocal_after_addr} |
| |
| |
| Add Multiple IPv6 Address And Verify |
| [Documentation] Add multiple IPv6 address and verify. |
| [Tags] Add_Multiple_IPv6_Address_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IPv6 Address ${test_ipv6_addr} AND Delete IPv6 Address ${test_ipv6_addr1} |
| ... AND Test Teardown Execution |
| |
| Configure Multiple IPv6 Address on BMC ${test_prefix_length} |
| |
| |
| Verify Coexistence Of Static IPv6 And SLAAC On BMC |
| [Documentation] Verify static IPv6 And SLAAC both coexist. |
| [Tags] Verify_Coexistence_Of_Static_IPv6_And_SLAAC_On_BMC |
| [Setup] Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} |
| Set SLAAC Configuration State And Verify ${True} |
| [Teardown] Delete IPv6 Address ${test_ipv6_addr} |
| |
| Sleep ${NETWORK_TIMEOUT}s |
| |
| Check Coexistence Of Static IPv6 And SLAAC |
| |
| |
| Verify Coexistence Of Link Local And DHCPv6 On BMC |
| [Documentation] Verify link local And dhcpv6 both coexist. |
| [Tags] Verify_Coexistence_Of_Link_Local_And_DHCPv6_On_BMC |
| [Setup] Set DHCPv6 Property Enabled ${2} |
| |
| Sleep ${NETWORK_TIMEOUT}s |
| |
| Check Coexistence Of Link Local And DHCPv6 |
| |
| |
| Verify Coexistence Of Link Local And SLAAC On BMC |
| [Documentation] Verify link local And SLAAC both coexist. |
| [Tags] Verify_Coexistence_Of_Link_Local_And_SLAAC_On_BMC |
| [Setup] Set SLAAC Configuration State And Verify ${True} |
| |
| Sleep ${NETWORK_TIMEOUT}s |
| |
| Check Coexistence Of Link Local And SLAAC |
| |
| |
| Verify Coexistence Of All IPv6 Type Addresses On BMC |
| [Documentation] Verify coexistence of link local, static, DHCPv6 and SLAAC ipv6 addresses. |
| [Tags] Verify_Coexistence_Of_All_IPv6_Type_Addresses_On_BMC |
| [Setup] Run Keywords Configure IPv6 Address On BMC ${test_ipv6_addr} ${test_prefix_length} |
| ... AND Get The Initial DHCPv6 Setting On Each Interface ${1} |
| ... AND Set And Verify DHCPv6 Property Enabled |
| ... AND Get The Initial SLAAC Setting On Each Interface ${1} |
| ... AND Set SLAAC Configuration State And Verify ${True} |
| [Teardown] Run Keywords Delete IPv6 Address ${test_ipv6_addr} |
| ... AND Set And Verify DHCPv6 Property ${dhcpv6_channel_1} ${1} |
| ... AND Set SLAAC Configuration State And Verify ${slaac_channel_1} [${HTTP_OK}] ${1} |
| |
| Sleep ${NETWORK_TIMEOUT}s |
| |
| # Verify link local, static, DHCPv6 and SLAAC ipv6 addresses coexist. |
| Verify The Coexistence Of The Address Type LinkLocal Static DHCPv6 SLAAC |
| |
| |
| *** Keywords *** |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup execution. |
| |
| Redfish.Login |
| ${active_channel_config}= Get Active Channel Config |
| Set Suite Variable ${active_channel_config} |
| |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Set Suite variable ${ethernet_interface} |
| |
| ${initial_ipv4_addressorigin_list} ${initial_ipv4_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses |
| ${initial_ipv6_addressorigin_list} ${initial_ipv6_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses |
| |
| Set Suite Variable ${initial_ipv4_addressorigin_list} |
| Set Suite Variable ${initial_ipv4_addr_list} |
| Set Suite Variable ${initial_ipv6_addressorigin_list} |
| Set Suite Variable ${initial_ipv6_addr_list} |
| |
| |
| Test Setup Execution |
| [Documentation] Test setup execution. |
| |
| @{ipv6_network_configurations}= Get IPv6 Network Configuration |
| Set Test Variable @{ipv6_network_configurations} |
| |
| # Get BMC IPv6 address and prefix length. |
| ${ipv6_data}= Get BMC IPv6 Info |
| Set Test Variable ${ipv6_data} |
| |
| |
| Test Teardown Execution |
| [Documentation] Test teardown execution. |
| |
| FFDC On Test Case Fail |
| |
| |
| Get IPv6 Network Configuration |
| [Documentation] Get Ipv6 network configuration. |
| # Sample output: |
| # { |
| # "@odata.id": "/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0", |
| # "@odata.type": "#EthernetInterface.v1_4_1.EthernetInterface", |
| # "DHCPv4": { |
| # "DHCPEnabled": false, |
| # "UseDNSServers": false, |
| # "UseDomainName": true, |
| # "UseNTPServers": false |
| # }, |
| # "DHCPv6": { |
| # "OperatingMode": "Disabled", |
| # "UseDNSServers": false, |
| # "UseDomainName": true, |
| # "UseNTPServers": false |
| # }, |
| # "Description": "Management Network Interface", |
| # "FQDN": "localhost", |
| # "HostName": "localhost", |
| # "IPv4Addresses": [ |
| # { |
| # "Address": "xx.xx.xx.xx", |
| # "AddressOrigin": "Static", |
| # "Gateway": "xx.xx.xx.1", |
| # "SubnetMask": "xx.xx.xx.0" |
| # }, |
| # { |
| # "Address": "169.254.xx.xx", |
| # "AddressOrigin": "IPv4LinkLocal", |
| # "Gateway": "0.0.0.0", |
| # "SubnetMask": "xx.xx.0.0" |
| # }, |
| # ], |
| # "IPv4StaticAddresses": [ |
| # { |
| # "Address": "xx.xx.xx.xx", |
| # "AddressOrigin": "Static", |
| # "Gateway": "xx.xx.xx.1", |
| # "SubnetMask": "xx.xx.0.0" |
| # } |
| # } |
| # ], |
| # "IPv6AddressPolicyTable": [], |
| # "IPv6Addresses": [ |
| # { |
| # "Address": "fe80::xxxx:xxxx:xxxx:xxxx", |
| # "AddressOrigin": "LinkLocal", |
| # "AddressState": null, |
| # "PrefixLength": xx |
| # } |
| # ], |
| # "IPv6DefaultGateway": "", |
| # "IPv6StaticAddresses": [ |
| # { "Address": "xxxx:xxxx:xxxx:xxxx::xxxx", |
| # "AddressOrigin": "Static", |
| # "AddressState": null, |
| # "PrefixLength": xxx |
| # } |
| # ], |
| # "Id": "eth0", |
| # "InterfaceEnabled": true, |
| # "LinkStatus": "LinkUp", |
| # "MACAddress": "xx:xx:xx:xx:xx:xx", |
| # "Name": "Manager Ethernet Interface", |
| # "NameServers": [], |
| # "SpeedMbps": 0, |
| # "StaticNameServers": [], |
| # "Status": { |
| # "Health": "OK", |
| # "HealthRollup": "OK", |
| # "State": "Enabled" |
| # }, |
| # "VLANs": { |
| # "@odata.id": "/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0/VLANs" |
| |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| @{ipv6_network_configurations}= Get From Dictionary ${resp.dict} IPv6StaticAddresses |
| RETURN @{ipv6_network_configurations} |
| |
| |
| Verify IPv6 And PrefixLength |
| [Documentation] Verify IPv6 address and prefix length on BMC. |
| [Arguments] ${ipv6_addr} ${prefix_len} |
| |
| # Description of the argument(s): |
| # ipv6_addr IPv6 address to be verified. |
| # prefix_len PrefixLength value to be verified. |
| |
| # Catenate IPv6 address and its prefix length. |
| ${ipv6_with_prefix}= Catenate ${ipv6_addr}/${prefix_len} |
| |
| # Get IPv6 address details on BMC using IP command. |
| @{ip_data}= Get BMC IPv6 Info |
| |
| # Verify if IPv6 and prefix length is configured on BMC. |
| |
| Should Contain ${ip_data} ${ipv6_with_prefix} |
| ... msg=IPv6 and prefix length pair does not exist. |
| |
| |
| Configure IPv6 Address On BMC |
| [Documentation] Add IPv6 Address on BMC. |
| [Arguments] ${ipv6_addr} ${prefix_len} ${valid_status_codes}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # ipv6_addr IPv6 address to be added (e.g. "2001:EEEE:2222::2022"). |
| # prefix_len Prefix length for the IPv6 to be added |
| # (e.g. "64"). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). |
| |
| ${prefix_length}= Convert To Integer ${prefix_len} |
| ${empty_dict}= Create Dictionary |
| ${ipv6_data}= Create Dictionary Address=${ipv6_addr} |
| ... PrefixLength=${prefix_length} |
| |
| ${patch_list}= Create List |
| |
| # Get existing static IPv6 configurations on BMC. |
| ${ipv6_network_configurations}= Get IPv6 Network Configuration |
| ${num_entries}= Get Length ${ipv6_network_configurations} |
| |
| FOR ${INDEX} IN RANGE 0 ${num_entries} |
| Append To List ${patch_list} ${empty_dict} |
| END |
| |
| ${valid_status_codes}= Set Variable If '${valid_status_codes}' == '${HTTP_OK}' |
| ... ${HTTP_OK},${HTTP_NO_CONTENT} |
| ... ${valid_status_codes} |
| |
| # We need not check for existence of IPv6 on BMC while adding. |
| Append To List ${patch_list} ${ipv6_data} |
| ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=[${valid_status_codes}] |
| |
| Return From Keyword If '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}' |
| |
| # Note: Network restart takes around 15-18s after patch request processing. |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| Verify IPv6 And PrefixLength ${ipv6_addr} ${prefix_len} |
| |
| # Verify if existing static IPv6 addresses still exist. |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 On BMC ${ipv6_network_configuration['Address']} |
| END |
| |
| Validate IPv6 Network Config On BMC |
| |
| |
| Configure Multiple IPv6 Address on BMC |
| [Documentation] Add multiple IPv6 address on BMC. |
| [Arguments] ${prefix_len} |
| ... ${valid_status_codes}=[${HTTP_OK},${HTTP_NO_CONTENT}] |
| |
| # Description of argument(s): |
| # prefix_len Prefix length for the IPv6 to be added |
| # (e.g. "64"). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). |
| |
| ${ipv6_list}= Create List ${test_ipv6_addr} ${test_ipv6_addr1} |
| ${prefix_length}= Convert To Integer ${prefix_len} |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| |
| # Get existing static IPv6 configurations on BMC. |
| ${ipv6_network_configurations}= Get IPv6 Network Configuration |
| ${num_entries}= Get Length ${ipv6_network_configurations} |
| |
| FOR ${INDEX} IN RANGE 0 ${num_entries} |
| Append To List ${patch_list} ${empty_dict} |
| END |
| |
| # We need not check for existence of IPv6 on BMC while adding. |
| FOR ${ipv6_addr} IN @{ipv6_list} |
| ${ipv6_data}= Create Dictionary Address=${ipv6_addr} PrefixLength=${prefix_length} |
| Append To List ${patch_list} ${ipv6_data} |
| END |
| ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=${valid_status_codes} |
| |
| IF ${valid_status_codes} != [${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| Fail msg=Static address not added correctly |
| END |
| |
| # Note: Network restart takes around 15-18s after patch request processing. |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| # Verify newly added ip address on CLI. |
| FOR ${ipv6_addr} IN @{ipv6_list} |
| Verify IPv6 And PrefixLength ${ipv6_addr} ${prefix_len} |
| END |
| |
| # Verify if existing static IPv6 addresses still exist. |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 On BMC ${ipv6_network_configuration['Address']} |
| END |
| |
| # Get the latest ipv6 network configurations. |
| @{ipv6_network_configurations}= Get IPv6 Network Configuration |
| |
| # Verify newly added ip address on BMC. |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Should Contain Match ${ipv6_list} ${ipv6_network_configuration['Address']} |
| END |
| |
| Validate IPv6 Network Config On BMC |
| |
| |
| Validate IPv6 Network Config On BMC |
| [Documentation] Check that IPv6 network info obtained via redfish matches info |
| ... obtained via CLI. |
| |
| @{ipv6_network_configurations}= Get IPv6 Network Configuration |
| ${ipv6_data}= Get BMC IPv6 Info |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Should Contain Match ${ipv6_data} ${ipv6_network_configuration['Address']}/* |
| ... msg=IPv6 address does not exist. |
| END |
| |
| |
| Delete IPv6 Address |
| [Documentation] Delete IPv6 address of BMC. |
| [Arguments] ${ipv6_addr} |
| ... ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}] |
| |
| # Description of argument(s): |
| # ipv6_addr IPv6 address to be deleted (e.g. "2001:1234:1234:1234::1234"). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). See prolog of rest_request |
| # method in redfish_plus.py for details. |
| |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| |
| @{ipv6_network_configurations}= Get IPv6 Network Configuration |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| IF '${ipv6_network_configuration['Address']}' == '${ipv6_addr}' |
| Append To List ${patch_list} ${null} |
| ELSE |
| Append To List ${patch_list} ${empty_dict} |
| END |
| END |
| |
| ${ip_found}= Run Keyword And Return Status List Should Contain Value |
| ... ${patch_list} ${null} msg=${ipv6_addr} does not exist on BMC |
| Pass Execution If ${ip_found} == ${False} ${ipv6_addr} does not exist on BMC |
| |
| # Run patch command only if given IP is found on BMC |
| ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=${valid_status_codes} |
| |
| # Note: Network restart takes around 15-18s after patch request processing |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| # IPv6 address that is deleted should not be there on BMC. |
| ${delete_status}= Run Keyword And Return Status Verify IPv6 On BMC ${ipv6_addr} |
| IF '${valid_status_codes}' == '[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}]' |
| Should Be True '${delete_status}' == '${False}' |
| ELSE |
| Should Be True '${delete_status}' == '${True}' |
| END |
| |
| Validate IPv6 Network Config On BMC |
| |
| |
| Modify IPv6 Address |
| [Documentation] Modify and verify IPv6 address of BMC. |
| [Arguments] ${ipv6} ${new_ipv6} ${prefix_len} |
| ... ${valid_status_codes}=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| # Description of argument(s): |
| # ipv6 IPv6 address to be replaced (e.g. "2001:AABB:CCDD::AAFF"). |
| # new_ipv6 New IPv6 address to be configured. |
| # prefix_len Prefix length value (Range 1 to 128). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200", "201"). |
| |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| ${prefix_length}= Convert To Integer ${prefix_len} |
| ${ipv6_data}= Create Dictionary |
| ... Address=${new_ipv6} PrefixLength=${prefix_length} |
| |
| # Sample IPv6 network configurations: |
| # "IPv6AddressPolicyTable": [], |
| # "IPv6Addresses": [ |
| # { |
| # "Address": "X002:db8:0:2::XX0", |
| # "AddressOrigin": "DHCPv6", |
| # "PrefixLength": 128 |
| # }, |
| # { |
| # "Address": “X002:db8:0:2:a94:XXff:fe82:XXXX", |
| # "AddressOrigin": "SLAAC", |
| # "PrefixLength": 64 |
| # }, |
| # { |
| # "Address": “Y002:db8:0:2:a94:efff:fe82:5000", |
| # "AddressOrigin": "Static", |
| # "PrefixLength": 56 |
| # }, |
| # { |
| # "Address": “Z002:db8:0:2:a94:efff:fe82:5000", |
| # "AddressOrigin": "Static", |
| # "PrefixLength": 56 |
| # }, |
| # { |
| # "Address": “Xe80::a94:efff:YYYY:XXXX", |
| # "AddressOrigin": "LinkLocal", |
| # "PrefixLength": 64 |
| # }, |
| # { |
| # "Address": “X002:db8:1:2:eff:233:fee:546", |
| # "AddressOrigin": "Static", |
| # "PrefixLength": 56 |
| # } |
| # ], |
| # "IPv6DefaultGateway": “XXXX::ab2e:80fe:87df:XXXX”, |
| # "IPv6StaticAddresses": [ |
| # { |
| # "Address": “X002:db8:0:2:a94:efff:fe82:5000", |
| # "PrefixLength": 56 |
| # }, |
| # { |
| # "Address": “Y002:db8:0:2:a94:efff:fe82:5000", |
| # "PrefixLength": 56 |
| # }, |
| # { |
| # "Address": “Z002:db8:1:2:eff:233:fee:546", |
| # "PrefixLength": 56 |
| # } |
| # ], |
| # "IPv6StaticDefaultGateways": [], |
| |
| # Find the position of IPv6 address to be modified. |
| @{ipv6_network_configurations}= Get IPv6 Network Configuration |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| IF '${ipv6_network_configuration['Address']}' == '${ipv6}' |
| Append To List ${patch_list} ${ipv6_data} |
| ELSE |
| Append To List ${patch_list} ${empty_dict} |
| END |
| END |
| |
| # Modify the IPv6 address only if given IPv6 is found |
| ${ip_found}= Run Keyword And Return Status List Should Contain Value |
| ... ${patch_list} ${ipv6_data} msg=${ipv6} does not exist on BMC |
| Pass Execution If ${ip_found} == ${False} ${ipv6} does not exist on BMC |
| |
| ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=&{data} valid_status_codes=${valid_status_codes} |
| |
| # Note: Network restart takes around 15-18s after patch request processing. |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| # Verify if new IPv6 address is configured on BMC. |
| Verify IPv6 On BMC ${new_ipv6} |
| |
| # Verify if old IPv6 address is erased. |
| ${cmd_status}= Run Keyword And Return Status |
| ... Verify IPv6 On BMC ${ipv6} |
| Should Be Equal ${cmd_status} ${False} msg=Old IPv6 address is not deleted. |
| |
| Validate IPv6 Network Config On BMC |
| |
| |
| Set SLAAC Configuration State And Verify |
| [Documentation] Set SLAAC configuration state and verify. |
| [Arguments] ${slaac_state} ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}] |
| ... ${channel_number}=${CHANNEL_NUMBER} |
| |
| # Description of argument(s): |
| # slaac_state SLAAC state('True' or 'False'). |
| # valid_status_code Expected valid status codes. |
| # channel_number Channel number 1(eth0) or 2(eth1). |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${data}= Set Variable If ${slaac_state} == ${False} ${DISABLE_SLAAC} ${ENABLE_SLAAC} |
| ${resp}= Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=${data} valid_status_codes=${valid_status_codes} |
| |
| # Verify SLAAC is set correctly. |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ${slaac_verify}= Get From Dictionary ${resp.dict} StatelessAddressAutoConfig |
| |
| IF '${slaac_verify['IPv6AutoConfigEnabled']}' != '${slaac_state}' |
| Fail msg=SLAAC not set properly. |
| END |
| |
| Set And Verify DHCPv6 Property |
| [Documentation] Set DHCPv6 property and verify. |
| [Arguments] ${dhcpv6_operating_mode}=${Disabled} ${channel_number}=${CHANNEL_NUMBER} |
| |
| # Description of argument(s): |
| # dhcpv6_operating_mode Enabled if user wants to enable DHCPv6('Enabled' or 'Disabled'). |
| # channel_number Channel number 1 or 2. |
| |
| Set DHCPv6 Property ${dhcpv6_operating_mode} ${channel_number} |
| Verify DHCPv6 Property ${dhcpv6_operating_mode} ${channel_number} |
| |
| |
| Set DHCPv6 Property |
| [Documentation] Set DHCPv6 attribute is enables or disabled. |
| [Arguments] ${dhcpv6_operating_mode}=${Disabled} ${channel_number}=${CHANNEL_NUMBER} |
| |
| # Description of argument(s): |
| # dhcpv6_operating_mode Enabled if user wants to enable DHCPv6('Enabled' or 'Disabled'). |
| # channel_number Channel number 1 or 2. |
| |
| ${data}= Set Variable If '${dhcpv6_operating_mode}' == 'Disabled' ${DISABLE_DHCPv6} ${ENABLE_DHCPv6} |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=${data} valid_status_codes=[${HTTP_OK},${HTTP_NO_CONTENT}] |
| |
| |
| Verify DHCPv6 Property |
| [Documentation] Verify DHCPv6 settings is enabled or disabled. |
| [Arguments] ${dhcpv6_operating_mode} ${channel_number}=${CHANNEL_NUMBER} |
| |
| # Description of Argument(s): |
| # dhcpv6_operating_mode Enable/ Disable DHCPv6. |
| # channel_number Channel number 1 or 2. |
| |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ${dhcpv6_verify}= Get From Dictionary ${resp.dict} DHCPv6 |
| |
| Should Be Equal '${dhcpv6_verify['OperatingMode']}' '${dhcpv6_operating_mode}' |
| |
| |
| Get IPv6 Static Default Gateway |
| [Documentation] Get IPv6 static default gateway. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| @{ipv6_static_defgw_configurations}= Get From Dictionary ${resp.dict} IPv6StaticDefaultGateways |
| RETURN @{ipv6_static_defgw_configurations} |
| |
| |
| Configure IPv6 Static Default Gateway On BMC |
| [Documentation] Configure IPv6 static default gateway on BMC. |
| [Arguments] ${ipv6_gw_addr} ${prefix_length_def} |
| ... ${valid_status_codes}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # ipv6_gw_addr IPv6 Static Default Gateway address to be configured. |
| # prefix_len_def Prefix length value (Range 1 to 128). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200", "204".) |
| |
| # Prefix Length is passed as None. |
| IF '${prefix_length_def}' == '${None}' |
| ${ipv6_gw}= Create Dictionary Address=${ipv6_gw_addr} |
| ELSE |
| ${ipv6_gw}= Create Dictionary Address=${ipv6_gw_addr} Prefix Length=${prefix_length_def} |
| END |
| |
| ${ipv6_static_def_gw}= Get IPv6 Static Default Gateway |
| |
| ${num_entries}= Get Length ${ipv6_static_def_gw} |
| |
| ${patch_list}= Create List |
| ${empty_dict}= Create Dictionary |
| |
| FOR ${INDEX} IN RANGE 0 ${num_entries} |
| Append To List ${patch_list} ${empty_dict} |
| END |
| |
| ${valid_status_codes}= Set Variable If '${valid_status_codes}' == '${HTTP_OK}' |
| ... ${HTTP_OK},${HTTP_NO_CONTENT} |
| ... ${valid_status_codes} |
| |
| Append To List ${patch_list} ${ipv6_gw} |
| ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} |
| |
| Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=${data} valid_status_codes=[${valid_status_codes}] |
| |
| # Verify the added static default gateway is present in Redfish Get Output. |
| ${ipv6_staticdef_gateway}= Get IPv6 Static Default Gateway |
| |
| ${ipv6_static_def_gw_list}= Create List |
| FOR ${ipv6_staticdef_gateway} IN @{ipv6_staticdef_gateway} |
| ${value}= Get From Dictionary ${ipv6_staticdef_gateway} Address |
| Append To List ${ipv6_static_def_gw_list} ${value} |
| END |
| |
| IF '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}' |
| Should Not Contain ${ipv6_static_def_gw_list} ${ipv6_gw_addr} |
| ELSE |
| Should Contain ${ipv6_static_def_gw_list} ${ipv6_gw_addr} |
| END |
| |
| |
| Modify IPv6 Static Default Gateway On BMC |
| [Documentation] Modify and verify IPv6 address of BMC. |
| [Arguments] ${ipv6_gw_addr} ${new_static_def_gw} ${prefix_length} |
| ... ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED}] |
| |
| # Description of argument(s): |
| # ipv6_gw_addr IPv6 static default gateway address to be replaced (e.g. "2001:AABB:CCDD::AAFF"). |
| # new_static_def_gw New static default gateway address to be configured. |
| # prefix_length Prefix length value (Range 1 to 128). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200", "204"). |
| |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| # Prefix Length is passed as None. |
| IF '${prefix_length_def}' == '${None}' |
| ${modified_ipv6_gw_addripv6_data}= Create Dictionary Address=${new_static_def_gw} |
| ELSE |
| ${modified_ipv6_gw_addripv6_data}= Create Dictionary Address=${new_static_def_gw} Prefix Length=${prefix_length_def} |
| END |
| |
| @{ipv6_static_def_gw_list}= Get IPv6 Static Default Gateway |
| |
| FOR ${ipv6_static_def_gw} IN @{ipv6_static_def_gw_list} |
| IF '${ipv6_static_def_gw['Address']}' == '${ipv6_gw_addr}' |
| Append To List ${patch_list} ${modified_ipv6_gw_addripv6_data} |
| ELSE |
| Append To List ${patch_list} ${empty_dict} |
| END |
| END |
| |
| # Modify the IPv6 address only if given IPv6 static default gateway is found. |
| ${ip_static_def_gw_found}= Run Keyword And Return Status List Should Contain Value |
| ... ${patch_list} ${modified_ipv6_gw_addripv6_data} msg=${ipv6_gw_addr} does not exist on BMC |
| Pass Execution If ${ip_static_def_gw_found} == ${False} ${ipv6_gw_addr} does not exist on BMC |
| |
| ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} |
| |
| Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=&{data} valid_status_codes=${valid_status_codes} |
| |
| ${ipv6_staticdef_gateway}= Get IPv6 Static Default Gateway |
| |
| ${ipv6_static_def_gw_list}= Create List |
| FOR ${ipv6_staticdef_gateway} IN @{ipv6_staticdef_gateway} |
| ${value}= Get From Dictionary ${ipv6_staticdef_gateway} Address |
| Append To List ${ipv6_static_def_gw_list} ${value} |
| END |
| |
| Should Contain ${ipv6_static_def_gw_list} ${new_static_def_gw} |
| # Verify if old static default gateway address is erased. |
| Should Not Contain ${ipv6_static_def_gw_list} ${ipv6_gw_addr} |
| |
| |
| Delete IPv6 Static Default Gateway |
| [Documentation] Delete IPv6 static default gateway on BMC. |
| [Arguments] ${ipv6_gw_addr} |
| ... ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}] |
| |
| # Description of argument(s): |
| # ipv6_gw_addr IPv6 Static Default Gateway address to be deleted. |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). |
| |
| ${patch_list}= Create List |
| ${empty_dict}= Create Dictionary |
| |
| ${ipv6_static_def_gw_list}= Create List |
| @{ipv6_static_defgw_configurations}= Get IPv6 Static Default Gateway |
| |
| FOR ${ipv6_staticdef_gateway} IN @{ipv6_static_defgw_configurations} |
| ${value}= Get From Dictionary ${ipv6_staticdef_gateway} Address |
| Append To List ${ipv6_static_def_gw_list} ${value} |
| END |
| |
| ${defgw_found}= Run Keyword And Return Status List Should Contain Value |
| ... ${ipv6_static_def_gw_list} ${ipv6_gw_addr} msg=${ipv6_gw_addr} does not exist on BMC |
| Skip If ${defgw_found} == ${False} ${ipv6_gw_addr} does not exist on BMC |
| |
| FOR ${ipv6_static_def_gw} IN @{ipv6_static_defgw_configurations} |
| IF '${ipv6_static_def_gw['Address']}' == '${ipv6_gw_addr}' |
| Append To List ${patch_list} ${null} |
| ELSE |
| Append To List ${patch_list} ${empty_dict} |
| END |
| END |
| |
| # Run patch command only if given IP is found on BMC. |
| ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} |
| |
| Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=${valid_status_codes} |
| |
| ${data}= Create Dictionary IPv6StaticDefaultGateways=${patch_list} |
| |
| @{ipv6_static_defgw_configurations}= Get IPv6 Static Default Gateway |
| Should Not Contain Match ${ipv6_static_defgw_configurations} ${ipv6_gw_addr} |
| ... msg=IPv6 Static default gateway does not exist. |
| |
| |
| Check Coexistence Of Linklocalv6 And Static IPv6 |
| [Documentation] Verify both linklocalv6 and static IPv6 exist. |
| |
| # Verify the address origin contains static and linklocal. |
| @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal |
| |
| Should Match Regexp ${ipv6_linklocal_addr} ${linklocal_addr_format} |
| Should Contain ${ipv6_addressorigin_list} Static |
| |
| |
| Check Coexistence Of Static IPv6 And SLAAC |
| [Documentation] Verify both static IPv6 and SLAAC coexist. |
| |
| # Verify the address origin contains static and slaac. |
| @{ipv6_addressorigin_list} ${ipv6_static_addr}= |
| ... Get Address Origin List And Address For Type Static |
| |
| @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= |
| ... Get Address Origin List And Address For Type SLAAC |
| |
| |
| Check Coexistence Of Link Local And SLAAC |
| [Documentation] Verify both link local and SLAAC coexist. |
| |
| # Verify the address origin contains SLAAC and link local. |
| @{ipv6_addressorigin_list} ${ipv6_link_local_addr}= |
| ... Get Address Origin List And Address For Type LinkLocal |
| |
| @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= |
| ... Get Address Origin List And Address For Type SLAAC |
| |
| Should Match Regexp ${ipv6_link_local_addr} ${linklocal_addr_format} |
| |
| |
| Check Coexistence Of Link Local And DHCPv6 |
| [Documentation] Verify both link local and dhcpv6 coexist. |
| |
| # Verify the address origin contains dhcpv6 and link local. |
| @{ipv6_address_origin_list} ${ipv6_link_local_addr}= |
| ... Get Address Origin List And Address For Type LinkLocal |
| |
| @{ipv6_address_origin_list} ${ipv6_dhcpv6_addr}= |
| ... Get Address Origin List And Address For Type DHCPv6 |
| |
| Should Match Regexp ${ipv6_link_local_addr} ${linklocal_addr_format} |
| |
| |
| Check If Linklocal Address Is In Correct Format |
| [Documentation] Linklocal address has network part fe80 and host part EUI64. |
| |
| # Fetch the linklocal address. |
| @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal |
| |
| # Follow EUI64 from MAC. |
| ${system_mac}= Get BMC MAC Address |
| ${split_octets}= Split String ${system_mac} : |
| ${first_octet}= Evaluate int('${split_octets[0]}', 16) |
| ${flipped_hex}= Evaluate format(${first_octet} ^ 2, '02x') |
| ${grp1}= Evaluate re.sub(r'^0+', '', '${flipped_hex}${split_octets[1]}') modules=re |
| ${grp2}= Evaluate re.sub(r'^0+', '', '${split_octets[2]}ff') modules=re |
| ${grp3}= Evaluate re.sub(r'^0+', '', '${split_octets[4]}${split_octets[5]}') modules=re |
| ${linklocal}= Set Variable fe80::${grp1}:${grp2}:fe${split_octets[3]}:${grp3} |
| |
| # Verify the linklocal obtained is the same as on the machine. |
| Should Be Equal ${linklocal} ${ipv6_linklocal_addr} |
| |
| |
| Check BMC Gets SLAAC Address |
| [Documentation] Check BMC gets slaac address. |
| |
| @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= Get Address Origin List And Address For Type SLAAC |
| |
| |
| Get The Initial DHCPv6 Setting On Each Interface |
| [Documentation] Get the initial DHCPv6 setting of each interface. |
| [Arguments] ${channel_number} |
| |
| # Description of the argument(s): |
| # channel_number Channel number 1 or 2. |
| |
| ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ${initial_dhcpv6_iface}= Get From Dictionary ${resp.dict} DHCPv6 |
| IF ${channel_number}==${1} |
| Set Test Variable ${dhcpv6_channel_1} ${initial_dhcpv6_iface['OperatingMode']} |
| ELSE |
| Set Test Variable ${dhcpv6_channel_2} ${initial_dhcpv6_iface['OperatingMode']} |
| END |
| |
| |
| Get The Initial DHCPv6 Settings |
| [Documentation] Get the initial DHCPv6 settings of both the interfaces. |
| |
| Get The Initial DHCPv6 Setting On Each Interface ${1} |
| Get The Initial DHCPv6 Setting On Each Interface ${2} |
| |
| |
| Get The Initial SLAAC Settings |
| [Documentation] Get the initial SLAAC settings of both the interfaces. |
| |
| Get The Initial SLAAC Setting On Each Interface ${1} |
| Get The Initial SLAAC Setting On Each Interface ${2} |
| |
| |
| Get The Initial SLAAC Setting On Each Interface |
| [Documentation] Get the initial SLAAC setting of the interface. |
| [Arguments] ${channel_number} |
| |
| # Description of the argument(s): |
| # channel_number Channel number 1 or 2. |
| |
| ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ${initial_slaac_iface}= Get From Dictionary ${resp.dict} StatelessAddressAutoConfig |
| IF ${channel_number}==${1} |
| Set Test Variable ${slaac_channel_1} ${initial_slaac_iface['IPv6AutoConfigEnabled']} |
| ELSE |
| Set Test Variable ${slaac_channel_2} ${initial_slaac_iface['IPv6AutoConfigEnabled']} |
| END |
| |
| |
| Get Address Origin List And IPv4 or IPv6 Address |
| [Documentation] Get address origin list and address for type. |
| [Arguments] ${ip_address_type} |
| |
| # Description of the argument(s): |
| # ip_address_type Type of IPv4 or IPv6 address to be checked. |
| |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| @{ip_addresses}= Get From Dictionary ${resp.dict} ${ip_address_type} |
| |
| ${ip_addressorigin_list}= Create List |
| ${ip_addr_list}= Create List |
| FOR ${ip_address} IN @{ip_addresses} |
| ${ip_addressorigin}= Get From Dictionary ${ip_address} AddressOrigin |
| Append To List ${ip_addressorigin_list} ${ip_addressorigin} |
| Append To List ${ip_addr_list} ${ip_address['Address']} |
| END |
| RETURN ${ip_addressorigin_list} ${ip_addr_list} |
| |
| |
| Verify All The Addresses Are Intact |
| [Documentation] Verify all the addresses and address origins remain intact. |
| |
| # Verify that it will not impact the IPv4 configuration. |
| Sleep ${NETWORK_TIMEOUT} |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| # IPv6 address must be present. |
| @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= Get Address Origin List And Address For Type SLAAC |
| @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal |
| |
| # IPv4 and IPv6 addresses must remain intact. |
| ${ipv4_addressorigin_list} ${ipv4_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses |
| ${ipv6_addressorigin_list} ${ipv6_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses |
| |
| ${ipv6_is_subset}= Evaluate set(${initial_ipv6_addr_list}).issubset(set(${ipv6_addr_list})) |
| Should Be True ${ipv6_is_subset} |
| |
| Should be Equal ${initial_ipv4_addressorigin_list} ${ipv4_addressorigin_list} |
| Should be Equal ${initial_ipv4_addr_list} ${ipv4_addr_list} |
| |
| |
| Get Interface ID Of IPv6 |
| [Documentation] Get interface id of IPv6 address. |
| [Arguments] ${ipv6_address} |
| |
| # Description of the argument(s): |
| # ${ipv6_address} IPv6 Address to extract the last 4 hextets. |
| |
| # Last 64 bits of SLAAC and Linklocal must be the same. |
| # Sample IPv6 network configurations. |
| #"IPv6AddressPolicyTable": [], |
| # "IPv6Addresses": [ |
| # { |
| # "Address": "fe80::xxxx:xxxx:xxxx:xxxx", |
| # "AddressOrigin": "LinkLocal", |
| # "AddressState": null, |
| # "PrefixLength": xx |
| # } |
| # ], |
| # { |
| # "Address": "2002:xxxx:xxxx:xxxx:xxxx", |
| # "AddressOrigin": "SLAAC", |
| # "PrefixLength": 64 |
| # } |
| # ], |
| |
| ${split_ip_address}= Split String ${ipv6_address} : |
| ${missing_ip}= Evaluate 8 - len(${split_ip_address}) + 1 |
| ${expanded_ip}= Create List |
| |
| FOR ${hextet} IN @{split_ip_address} |
| IF '${hextet}' == '' |
| FOR ${i} IN RANGE ${missing_ip} |
| Append To List ${expanded_ip} 0000 |
| END |
| ELSE |
| Append To List ${expanded_ip} ${hextet} |
| END |
| END |
| ${interface_id}= Evaluate ':'.join(${expanded_ip}[-4:]) |
| RETURN ${interface_id} |