| *** Settings *** |
| Documentation Network interface IPv6 configuration and verification |
| ... tests. |
| |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Resource ../../lib/bmc_ipv6_utils.robot |
| Library ../../lib/bmc_network_utils.py |
| Library Collections |
| |
| Test Setup Test Setup Execution |
| Test Teardown Test Teardown Execution |
| Suite Setup Suite Setup Execution |
| |
| |
| *** Variables *** |
| ${test_ipv6_addr} 2001:db8:3333:4444:5555:6666:7777:8888 |
| ${test_ipv6_invalid_addr} 2001:db8:3333:4444:5555:6666:7777:JJKK |
| |
| # Valid prefix length is a intiger ranges from 1 to 128. |
| ${test_prefix_lenght} 64 |
| |
| |
| *** Test Cases *** |
| |
| Get IPv6 Address And Verify |
| [Documentation] Get IPv6 Address And Verify. |
| [Tags] Get_IPv6_Address_And_Verify |
| |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 On BMC ${ipv6_network_configuration['Address']} |
| END |
| |
| |
| Get PrefixLength And Verify |
| [Documentation] Get IPv6 prefix length and verify. |
| [Tags] Get_PrefixLength_And_Verify |
| |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 On BMC ${ipv6_network_configuration['PrefixLength']} |
| END |
| |
| |
| Get IPv6 Default Gateway And Verify |
| [Documentation] Get IPv6 default gateway and verify. |
| [Tags] Get_IPv6_Default_Gateway_And_Verify |
| |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ${ipv6_gateway}= Get From Dictionary ${resp.dict} IPv6DefaultGateway |
| Verify IPv6 Default Gateway On BMC ${ipv6_gateway} |
| |
| |
| Verify All Configured IPv6 And PrefixLength On BMC |
| [Documentation] Verify IPv6 address and its prefix length on BMC. |
| [Tags] Verify_All_Configured_IPv6_And_PrefixLength_On_BMC |
| |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 And PrefixLength On BMC ${ipv6_network_configuration['Address']} |
| ... ${ipv6_network_configuration['PrefixLength']} |
| END |
| |
| |
| Configure IPv6 Address And Verify |
| [Documentation] Configure IPv6 address and verify. |
| [Tags] Configure_IPv6_Address_And_Verify |
| [Template] Configure IPv6 Address On BMC |
| |
| |
| # IPv6 address Prefix length |
| ${test_ipv6_addr} ${test_prefix_length} |
| |
| |
| *** Keywords *** |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup execution. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Set Suite variable ${ethernet_interface} |
| |
| |
| Test Setup Execution |
| [Documentation] Test setup execution. |
| |
| Redfish.Login |
| |
| @{ipv6_network_configurations}= Get IPv6 Network Configuration |
| Set Test Variable @{ipv6_network_configurations} |
| |
| # Get BMC IPv6 address and prefix length. |
| ${ipv6_data}= Get BMC IPv6 Info |
| Set Test Variable ${ipv6_data} |
| |
| |
| Test Teardown Execution |
| [Documentation] Test teardown execution. |
| |
| FFDC On Test Case Fail |
| Redfish.Logout |
| |
| |
| Get IPv6 Network Configuration |
| [Documentation] Get Ipv6 network configuration. |
| # Sample output: |
| # { |
| # "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0", |
| # "@odata.type": "#EthernetInterface.v1_4_1.EthernetInterface", |
| # "DHCPv4": { |
| # "DHCPEnabled": false, |
| # "UseDNSServers": false, |
| # "UseDomainName": true, |
| # "UseNTPServers": false |
| # }, |
| # "DHCPv6": { |
| # "OperatingMode": "Disabled", |
| # "UseDNSServers": false, |
| # "UseDomainName": true, |
| # "UseNTPServers": false |
| # }, |
| # "Description": "Management Network Interface", |
| # "FQDN": "localhost", |
| # "HostName": "localhost", |
| # "IPv4Addresses": [ |
| # { |
| # "Address": "xx.xx.xx.xx", |
| # "AddressOrigin": "Static", |
| # "Gateway": "xx.xx.xx.1", |
| # "SubnetMask": "xx.xx.xx.0" |
| # }, |
| # { |
| # "Address": "169.254.xx.xx", |
| # "AddressOrigin": "IPv4LinkLocal", |
| # "Gateway": "0.0.0.0", |
| # "SubnetMask": "xx.xx.0.0" |
| # }, |
| # ], |
| # "IPv4StaticAddresses": [ |
| # { |
| # "Address": "xx.xx.xx.xx", |
| # "AddressOrigin": "Static", |
| # "Gateway": "xx.xx.xx.1", |
| # "SubnetMask": "xx.xx.0.0" |
| # } |
| # } |
| # ], |
| # "IPv6AddressPolicyTable": [], |
| # "IPv6Addresses": [ |
| # { |
| # "Address": "fe80::xxxx:xxxx:xxxx:xxxx", |
| # "AddressOrigin": "LinkLocal", |
| # "AddressState": null, |
| # "PrefixLength": xx |
| # } |
| # ], |
| # "IPv6DefaultGateway": "", |
| # "IPv6StaticAddresses": [ |
| # { "Address": "xxxx:xxxx:xxxx:xxxx::xxxx", |
| # "AddressOrigin": "Static", |
| # "AddressState": null, |
| # "PrefixLength": xxx |
| # } |
| # ], |
| # "Id": "eth0", |
| # "InterfaceEnabled": true, |
| # "LinkStatus": "LinkUp", |
| # "MACAddress": "xx:xx:xx:xx:xx:xx", |
| # "Name": "Manager Ethernet Interface", |
| # "NameServers": [], |
| # "SpeedMbps": 0, |
| # "StaticNameServers": [], |
| # "Status": { |
| # "Health": "OK", |
| # "HealthRollup": "OK", |
| # "State": "Enabled" |
| # }, |
| # "VLANs": { |
| # "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0/VLANs" |
| |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| @{ipv6_network_configurations}= Get From Dictionary ${resp.dict} IPv6StaticAddresses |
| [Return] @{ipv6_network_configurations} |
| |
| |
| Verify IPv6 And PrefixLength |
| [Documentation] Verify IPv6 address and prefix length on BMC. |
| [Arguments] ${ipv6_addr} ${prefix_len} |
| |
| # Description of the argument(s): |
| # ipv6_addr IPv6 address to be verified. |
| # prefix_len PrefixLength value to be verified. |
| |
| # Catenate IPv6 address and its prefix length. |
| ${ipv6_with_prefix}= Catenate ${ipv6_addr}/${prefix_len} |
| |
| # Get IPv6 address details on BMC using IP command. |
| @{ip_data}= Get BMC IPv6 Info |
| |
| # Verify if IPv6 and prefix length is configured on BMC. |
| |
| Should Contain ${ip_data} ${ipv6_with_prefix} |
| ... msg=IPv6 and prefix length pair does not exist. |
| |
| |
| Configure IPv6 Address On BMC |
| [Documentation] Add IPv6 Address on BMC. |
| [Arguments] ${ipv6_addr} ${prefix_len} ${valid_status_codes}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # ipv6_addr IPv6 address to be added (e.g. "2001:EEEE:2222::2022"). |
| # prefix_len Prefix length for the IPv6 to be added |
| # (e.g. "64"). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). |
| |
| ${empty_dict}= Create Dictionary |
| ${ipv6_data}= Create Dictionary Address=${ipv6_addr} |
| ... PrefixLength=${prefix_len} |
| |
| ${patch_list}= Create List |
| |
| # Get existing static IPv6 configurations on BMC. |
| ${ipv6_network_configurations}= Get IPv6 Network Configuration |
| ${num_entries}= Get Length ${ipv6_network_configurations} |
| |
| FOR ${INDEX} IN RANGE 0 ${num_entries} |
| Append To List ${patch_list} ${empty_dict} |
| END |
| |
| ${valid_status_codes}= Run Keyword If '${valid_status_codes}' == '${HTTP_OK}' |
| ... Set Variable ${HTTP_OK},${HTTP_NO_CONTENT} |
| ... ELSE Set Variable ${valid_status_codes} |
| |
| # We need not check for existence of IPv6 on BMC while adding. |
| Append To List ${patch_list} ${ipv6_data} |
| ${data}= Create Dictionary IPv6StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=[${valid_status_codes}] |
| |
| Return From Keyword If '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}' |
| |
| # Note: Network restart takes around 15-18s after patch request processing. |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| Verify IPv6 And PrefixLength ${ipv6_addr} ${prefix_len} |
| |
| # Verify if existing static IPv6 addresses still exist. |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Verify IPv6 On BMC ${ipv6_network_configuration['Address']} |
| END |
| |
| Validate IPv6 Network Config On BMC |
| |
| |
| Validate IPv6 Network Config On BMC |
| [Documentation] Check that IPv6 network info obtained via redfish matches info |
| ... obtained via CLI. |
| @{network_configurations}= Get IPv6 Network Configuration |
| ${ipv6_data}= Get BMC IPv6 Info |
| FOR ${ipv6_network_configuration} IN @{ipv6_network_configurations} |
| Should Contain Match ${ipv6_data} ${ipv6_network_configuration['Address']}/* |
| ... msg=IPv6 address does not exist. |
| END |
| |