| *** Settings *** |
| Documentation Test IPMI Inband SDR commands. |
| ... Following IPMI command are verified, |
| ... 1. Get SDR, |
| ... 2. Get Device SDR Info, |
| ... 3. Reserve Device SDR Repository, |
| ... 4. Get Device SDR. |
| |
| Resource ../lib/ipmi_client.robot |
| Resource ../lib/openbmc_ffdc.robot |
| Resource ../lib/boot_utils.robot |
| Library ../lib/ipmi_utils.py |
| Variables ../data/ipmi_raw_cmd_table.py |
| |
| Suite setup Suite Setup Execution |
| Suite Teardown Redfish.Logout |
| Test Teardown FFDC On Test Case Fail |
| |
| Force Tags IPMI_Inband_SDR |
| |
| *** Test Cases *** |
| |
| Verify Get SDR For Maximum Record Via IPMI |
| [Documentation] Verify Get SDR for each and every record one by one via IPMI lanplus. |
| [Tags] Verify_Get_SDR_For_Maximum_Record_Via_IPMI |
| |
| # Gets the Total Record Count from SDR Info and the last Record entry number. |
| ${record_count} ${last_record}= Get Record Count And Last Record From SDR |
| |
| # Validate each and every record till the last record. |
| FOR ${record} IN RANGE 0 ${record_count} |
| # Convert number to hexadecimal record ID. |
| ${recordhex}= Convert To Hex ${record} length=4 lowercase=yes |
| ${first_digit} Set Variable ${recordhex}[0:2] |
| ${second_digit} Set Variable ${recordhex}[2:4] |
| |
| # Get SDR command. |
| ${resp}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Get SDR']['Get'][1]} 0x00 0x00 0x${second_digit} 0x${first_digit} 0x00 0xff |
| ${get_SDR}= Split String ${resp} |
| |
| # If the record ID reaches the last data available, the next record ID will be ff ff. |
| # eg, If total record ID available is 115, record IDs : 0 - 114, |
| # Then when record ID reaches last record ID (i.e 114 (decimal) - 72h), |
| # Get SDR response bytes 0:2 will be - ff ff 72 00 .... |
| # If not then (say 25 - 19h ), 1a 00 19 00 .... |
| |
| IF '${record}' != '${last_record}' |
| # current record ID in response data. |
| Should Be Equal ${get_SDR[2]} ${second_digit} |
| Should Be Equal ${get_SDR[3]} ${first_digit} |
| |
| # Next record ID in response data. |
| ${record_next}= Evaluate ${record} + 1 |
| ${record_next}= Convert To Hex ${record_next} length=4 lowercase=yes |
| ${record_next_msb} Set Variable ${record_next}[0:2] |
| ${record_next_lsb} Set Variable ${record_next}[2:4] |
| Should Be Equal ${get_SDR[0]} ${record_next_lsb} |
| Should Be Equal ${get_SDR[1]} ${record_next_msb} |
| ELSE |
| # Next record ID in response data. |
| Should Be Equal ${get_SDR[0]} ff |
| Should Be Equal ${get_SDR[1]} ff |
| |
| # current record ID in response data. |
| Should Be Equal ${get_SDR[2]} ${second_digit} |
| Should Be Equal ${get_SDR[3]} ${first_digit} |
| END |
| |
| # Response Data Count - total records (max - FFh - 255 in decimal). |
| ${response_data}= Set Variable ${get_SDR[2:]} |
| ${length}= Get Length ${response_data} |
| Should Be True 0<${length}<=255 |
| END |
| |
| |
| Verify Sensor And SDR Count In Get Device SDR Info Via Inband IPMI |
| [Documentation] Verify Sensor and SDR Count in Get Device SDR Info via inband IPMI. |
| [Tags] Verify_Sensor_And_SDR_Count_In_Get_Device_SDR_Info_Via_Inband_IPMI |
| |
| # Get Sensor count and SDR elist all count from IPMI LAN interface. |
| ${sensor_count_lan1} ${SDR_count_lan1}= Get Count for Sensor And SDR Elist All |
| |
| # Get Sensor Count From Get Device SDR Info command. |
| ${sensor_count1}= Get Sensor Count From SDR Info |
| # Compare Get Device SDR Sensor count with Sensor count from lanplus. |
| Should Be Equal As Integers ${sensor_count1} ${sensor_count_lan1} |
| |
| # Get SDR Count From Get Device SDR Info command. |
| ${SDR_count1}= Get SDR Count From SDR Info |
| # Get sdr oem record count from "sdr elist -vvv" command output. |
| ${sdr_data}= Run Inband IPMI Standard Command sdr elist -vvv fail_on_err=0 |
| ${sdr_oem}= Fetch OEM Sdr Count ${sdr_data} |
| ${sdr_info_record_count}= Evaluate ${SDR_count1} - ${sdr_oem} |
| |
| # Compare Get Device SDR Sdr count with SDR Elist All count from lanplus. |
| Should Be Equal As Integers ${sdr_info_record_count} ${SDR_count_lan1} |
| |
| # Reboot Host using Chassis Power Cycle. |
| IPMI Power Cycle |
| |
| # Get Sensor count and SDR elist all count from IPMI lanplus interface. |
| ${sensor_count_lan2} ${SDR_count_lan2}= Get Count for Sensor And SDR Elist All |
| |
| # Get Sensor Count From Get Device SDR Info command. |
| ${sensor_count2}= Get Sensor Count From SDR Info |
| # Compare Get Device SDR Sensor count with Sensor count from lanplus. |
| Should Be Equal As Integers ${sensor_count2} ${sensor_count_lan2} |
| |
| # Get SDR Count From Get Device SDR Info command. |
| ${SDR_count2}= Get SDR Count From SDR Info |
| ${sdr_info_record_count2}= Evaluate ${SDR_count2} - ${sdr_oem} |
| # Compare Get Device SDR Sdr count with SDR Elist All count from lanplus. |
| Should Be Equal As Integers ${sdr_info_record_count2} ${SDR_count_lan2} |
| |
| |
| Verify Timestamp In Get Device SDR Info Via Inband IPMI |
| [Documentation] Verify timestamp In Get Device SDR Info via inband IPMI. |
| [Tags] Verify_Timestamp_In_Get_Device_SDR_Info_Via_Inband_IPMI |
| |
| # Reboot Host using Chassis Power Cycle. |
| IPMI Power Cycle |
| |
| # Get epoch Timestamp obtained from Get Device SDR Info command. |
| ${SDR_timestamp}= Get Device SDR Timestamp |
| |
| # Get current date from BMC Native Date command and convert to epoch. |
| ${bmc_date}= Get Current Date from BMC |
| ${epoch_bmc}= Convert Date ${bmc_date} epoch exclude_millis=yes date_format=%m/%d/%Y %H:%M:%S |
| |
| # Compare time difference between bmc time and Get Device SDR Info timestamp. |
| # The maximum time difference should be less then 6 minute - 360 seconds. |
| ${difference}= Evaluate int(${epoch_bmc}) - int(${SDR_timestamp}) |
| Should Be True ${difference}<=360 |
| |
| |
| Verify Get Device SDR Info For Invalid Data Request |
| [Documentation] Verify Get Device SDR Info via inband IPMI with extra bytes. |
| [Tags] Verify_Get_Device_SDR_Info_For_Invalid_Data_Request |
| |
| # Sensor Count Via Device SDR Info with extra bytes. |
| ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][3]}* |
| ... Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][0]} 0x00 |
| # Proper error code should be returned. |
| Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][2]} |
| |
| # SDR Count Via Device SDR Info with extra bytes. |
| ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][3]}* |
| ... Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][1]} 0x00 |
| # Proper error code should be returned. |
| Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][2]} |
| |
| |
| Verify Device SDR Info Via IPMI Lanplus |
| [Documentation] Verify whether Get Device SDR Info command is accessible via lanplus. |
| [Tags] Verify_Device_SDR_Info_Via_IPMI_Lanplus |
| |
| # Sensor Count Via Device SDR Info via lanplus. |
| ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][5]}* |
| ... Run External IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][0]} |
| # Proper error code should be returned. |
| Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][4]} |
| |
| # SDR Count Via Device SDR Info via lanplus. |
| ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][5]}* |
| ... Run External IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][1]} |
| # Proper error code should be returned. |
| Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][4]} |
| |
| |
| Verify Reserve Device SDR Repository Via Inband IPMI |
| [Documentation] Verify Reserve Device SDR Repository via inband IPMI. |
| [Tags] Verify_Reserve_Device_SDR_Repository_Via_Inband_IPMI |
| |
| # Reserve Device SDR Repository via inband IPMI. |
| ${resp}= Get Reserve Device SDR Repository |
| ${reserve_id}= Split String ${resp} |
| |
| # Identify the byte count. |
| ${length}= Get Length ${reserve_id} |
| Should Be Equal As Integers ${length} 2 |
| |
| |
| Verify Reserve Device SDR Repository For Invalid Data Request |
| [Documentation] Verify Reserve Device SDR Repository via inband IPMI with extra request bytes. |
| [Tags] Verify_Reserve_Device_SDR_Repository_For_Invalid_Data_Request |
| |
| # Reserve Device SDR Repository with extra request bytes. |
| ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][2]}* |
| ... Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][0]} 0x00 |
| # Proper error code should be returned. |
| Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][1]} |
| |
| |
| Verify Reserve Device SDR Repository Info Via IPMI Lanplus |
| [Documentation] Verify whether Reserve Device SDR Repository command is accessible via lanplus. |
| [Tags] Verify_Reserve_Device_SDR_Repository_Info_Via_IPMI_Lanplus |
| |
| # Reserve Device SDR Repository via lanplus. |
| ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][4]}* |
| ... Run External IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][0]} |
| # Proper error code should be returned. |
| Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][3]} |
| |
| |
| Verify Reserve Device SDR Repository For Partial Record |
| [Documentation] Verify whether reservation ID of Reserve Device SDR Repository is accessible |
| ... to fetch partial record from Get Device SDR. |
| [Tags] Verify_Reserve_Device_SDR_Repository_For_Partial_Record |
| |
| # Get Reservation ID. |
| ${resp}= Get Reserve Device SDR Repository |
| ${reserve_id}= Split String ${resp} |
| |
| # Check whether the response for Get device SDR command is obtained with the given Reservation ID. |
| ${resp}= Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f |
| ${resp}= Split String ${resp} |
| # Record data starts from ${resp[2]}. |
| ${resp}= Set Variable ${resp[2:]} |
| ${length}= Get Length ${resp} |
| Should Be Equal As Integers ${length} 15 |
| |
| |
| Verify Reserve Device SDR Repository For Partial Record After BMC Reboot |
| [Documentation] Verify whether Reservation ID of Reserve Device SDR Repository, |
| ... is accessible after bmc reboot to fetch partial record from Get Device SDR. |
| [Tags] Verify_Reserve_Device_SDR_Repository_For_Partial_Record_After_BMC_Reboot |
| |
| # Generate Reservation ID. |
| ${resp}= Get Reserve Device SDR Repository |
| ${reserve_id}= Split String ${resp} |
| |
| # Check whether the response for Get device SDR command is obtained with the given Reservation ID. |
| ${resp1}= Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f |
| |
| # Reboot bmc. |
| IPMI MC Reset Cold (run) |
| |
| # Check whether the response for Get device SDR command is obtained with the given Reservation ID. |
| # Reserve IDs are volatile so once bmc is rebooted, new Reserve ID should be generated. |
| ${resp2}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][5]}* |
| ... Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f |
| |
| |
| Verify Reserve Device SDR Repository Invalid Reservation ID For Partial Record |
| [Documentation] Verify whether invalid reservation ID of Reserve Device SDR Repository, |
| ... is accessible to fetch partial record from Get Device SDR. |
| [Tags] Verify_Reserve_Device_SDR_Repository_Invalid_Reservation_ID_For_Partial_Record |
| |
| # Generate Reservation ID 1. |
| ${resp}= Get Reserve Device SDR Repository |
| ${reserve_id}= Split String ${resp} |
| |
| # Generate Reservation ID 2. |
| ${resp2}= Get Reserve Device SDR Repository |
| |
| # Check whether response for Gner device SDR command is obtained with Reservation ID 1. |
| # Once Reservation ID is overwritten, old Reservation ID will be invalid. |
| ${resp1}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][5]}* |
| ... Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f |
| |
| |
| Verify Get Device SDR For Maximum Record Via IPMI |
| [Documentation] Verify Get Device SDR for each and every Record Via IPMI Inband. |
| [Tags] Verify_Get_Device_SDR_For_Maximum_Record_Via_IPMI |
| |
| # Gets the Total Record Count from SDR Info and the last Record entry number. |
| ${record_count} ${last_record}= Get Record Count And Last Record From SDR |
| |
| # Validate each and every record till the last record. |
| FOR ${record} IN RANGE 0 ${record_count} |
| # Convert number to hexadecimal record ID. |
| ${recordhex}= Convert To Hex ${record} length=4 lowercase=yes |
| ${first_digit} Set Variable ${recordhex}[0:2] |
| ${second_digit} Set Variable ${recordhex}[2:4] |
| |
| # Get Device SDR command. |
| ${resp}= Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x00 0x00 0x${second_digit} 0x${first_digit} 0x00 0xff |
| ${get_dev_SDR}= Split String ${resp} |
| |
| # If the record ID reaches the last data available, the next record ID will be ff ff |
| # eg, If total record ID available is 115, record IDs : 0 - 114, |
| # Then when record ID reaches last record ID (i.e 114 (in decimal) - 72h), |
| # Get SDR response bytes 0:2 will be - ff ff 72 00 .... |
| # If not then (say 25 - 19h ), 1a 00 19 00 .... |
| |
| IF '${record}' != '${last_record}' |
| # current record ID in response data. |
| Should Be Equal ${get_dev_SDR[2]} ${second_digit} |
| Should Be Equal ${get_dev_SDR[3]} ${first_digit} |
| |
| # Next record ID in response data. |
| ${record_next}= Evaluate ${record} + 1 |
| ${record_next}= Convert To Hex ${record_next} length=4 lowercase=yes |
| ${record_next_msb} Set Variable ${record_next}[0:2] |
| ${record_next_lsb} Set Variable ${record_next}[2:4] |
| Should Be Equal ${get_dev_SDR[0]} ${record_next_lsb} |
| Should Be Equal ${get_dev_SDR[1]} ${record_next_msb} |
| |
| ELSE |
| # Next record ID in response data. |
| Should Be Equal ${get_dev_SDR[0]} ff |
| Should Be Equal ${get_dev_SDR[1]} ff |
| |
| # current record ID in response data. |
| Should Be Equal ${get_dev_SDR[2]} ${second_digit} |
| Should Be Equal ${get_dev_SDR[3]} ${first_digit} |
| |
| END |
| # Response data count - total record ID (max - FFh - 255 in decimal). |
| ${response_data}= Set Variable ${get_dev_SDR[2:]} |
| ${length}= Get Length ${response_data} |
| Should Be True 0<${length}<=255 |
| END |
| |
| |
| Verify Get Device SDR For Invalid Data Request Via IPMI |
| [Documentation] Verify Get Device SDR via IPMI lanplus with extra bytes. |
| [Tags] Verify_Get_Device_SDR_For_Invalid_Data_Request_Via_IPMI |
| |
| # Get SDR command with extra bytes. |
| ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get'][3]}* |
| ... Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x00 0x00 ${IPMI_RAW_CMD['Device_SDR']['Get'][1]} 0x00 |
| # Proper error code should be returned. |
| Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get'][2]} |
| |
| |
| *** Keywords *** |
| |
| Get IPMI Sensor Count |
| [Documentation] Get sensors count using "SDR elist all" command. |
| # Example of "SDR elist all" command output: |
| # BootProgress | 03h | ok | 34.2 | |
| # OperatingSystemS | 05h | ok | 35.1 | |
| # AttemptsLeft | 07h | ok | 34.1 | |
| # occ0 | 08h | ok | 210.1 | Device Disabled |
| # occ1 | 09h | ok | 210.2 | Device Disabled |
| # p0_core0_temp | 11h | ns | 3.1 | Disabled |
| # cpu0_core0 | 12h | ok | 208.1 | Presence detected |
| # p0_core1_temp | 14h | ns | 3.2 | Disabled |
| # cpu0_core1 | 15h | ok | 208.2 | Presence detected |
| # p0_core2_temp | 17h | ns | 3.3 | Disabled |
| # .. |
| # .. |
| # .. |
| # .. |
| # .. |
| # .. |
| # fan3 | 00h | ns | 29.4 | Logical FRU @35h |
| # bmc | 00h | ns | 6.1 | Logical FRU @3Ch |
| # ethernet | 00h | ns | 1.1 | Logical FRU @46h |
| |
| ${output}= Run IPMI Standard Command sdr elist all |
| ${sensor_list}= Split String ${output} \n |
| ${sensor_count}= Get Length ${sensor_list} |
| [Return] ${sensor_count} |
| |
| |
| Get Device SDR Info For Sensor Data |
| [Documentation] Get Device SDR Info via inband IPMI and return response data with Sensor count. |
| |
| # Get Device SDR Info for Sensor data. |
| ${sensor_data}= Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][0]} |
| |
| [Return] ${sensor_data} |
| |
| |
| Get Device SDR Info For SDR Data |
| [Documentation] Get Device SDR Info via inband IPMI and return response data with SDR count. |
| |
| # Get Device SDR Info for SDR data. |
| ${SDR_data}= Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][1]} |
| |
| [Return] ${SDR_data} |
| |
| |
| Get Sensor Count From SDR Info |
| [Documentation] Get Sensor Count from Get Device SDR Info data. |
| |
| # Get Device SDR Info Via inband IPMI for Sensor count. |
| ${sensor_data}= Get Device SDR Info For Sensor Data |
| |
| # Get Sensor count from Get Device SDR Info count - bytie 0. |
| ${sensor_data}= Split String ${sensor_data} |
| ${sensor_count}= Set Variable ${sensor_data[0]} |
| ${sensor_count}= Convert To Integer ${sensor_count} 16 |
| |
| [Return] ${sensor_count} |
| |
| |
| Get SDR Count From SDR Info |
| [Documentation] Get SDR Count from Get Device SDR Info data. |
| |
| # Get Device SDR Info Via inband IPMI for SDR count. |
| ${SDR_data}= Get Device SDR Info For SDR Data |
| |
| # Get SDR count from Get Device SDR Info count - byte 0. |
| ${SDR_data}= Split String ${SDR_data} |
| ${SDR_count}= Set Variable ${SDR_data[0]} |
| ${SDR_count}= Convert To Integer ${SDR_count} 16 |
| |
| [Return] ${SDR_count} |
| |
| |
| Get Device SDR Timestamp |
| [Documentation] Get Timestamp from Get Device SDR Info. |
| |
| # Get Device SDR Info Via inband IPMI for Sendor count. |
| ${sensor_data}= Get Device SDR Info For Sensor Data |
| # Get Device SDR Info Via inband IPMI for SDR count. |
| ${SDR_data}= Get Device SDR Info For SDR Data |
| |
| # Split into list. |
| ${sensor_data}= Split String ${sensor_data} |
| ${SDR_data}= Split String ${SDR_data} |
| |
| # Timestamp for the Get SDR count will be from Response byte 2 to N. |
| # Compare the timestamps for Sensor data and SDR data. |
| Should Be Equal ${sensor_data[2:]} ${SDR_data[2:]} |
| |
| # Convert Bytestamp to Epoch timestamp. |
| ${timestamp}= Set Variable ${SDR_data[2:]} |
| Reverse List ${timestamp} |
| ${timestamp}= Evaluate "".join(${timestamp}) |
| # Prefixes 0s for expected bytes. |
| ${timestamp}= Zfill Data ${timestamp} 8 |
| ${timestamp}= Convert To Integer ${timestamp} 16 |
| |
| [Return] ${timestamp} |
| |
| |
| Get Count for Sensor And SDR Elist All |
| [Documentation] Get Sensor and SDR elist all count via IPMI lanplus. |
| |
| # Get Sensor list via IPMI lanplus. |
| ${sensor_count}= Run IPMI Standard Command sensor | wc -l |
| # Get SDR elist all via IPMI lanplus. |
| ${SDR_count}= Get IPMI Sensor Count |
| |
| [Return] ${sensor_count} ${SDR_count} |
| |
| |
| Get Reserve Device SDR Repository |
| [Documentation] Get Reserve Device SDR Repository via Inband IPMI. |
| |
| # Reserve Device SDR Repository command via inband. |
| ${resp}= Run Inband IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][0]} |
| |
| [Return] ${resp} |
| |
| |
| Get IPMI SDR Status Info |
| [Documentation] Returns status for given IPMI SDR Info. |
| [Arguments] ${setting} |
| # Description of argument(s): |
| # setting SDR Info which needs to be read(e.g. "SDR Version"). |
| # SDR Version : 0x51 |
| # Record Count : 58 |
| # Free Space : 9312 bytes |
| # Most recent Addition : 03/10/2022 05:56:02 |
| # Most recent Erase : 02/07/2106 06:28:15 |
| # SDR overflow : yes |
| # SDR Repository Update Support : unspecified |
| # Delete SDR supported : no |
| # Partial Add SDR supported : no |
| # Reserve SDR repository supported : yes |
| # SDR Repository Alloc info supported : yes |
| |
| # Get SDR Info IPMI command. |
| ${resp}= Run IPMI Standard Command sdr info |
| |
| # Return lines for given IPMI SDR Info. |
| ${setting_line}= Get Lines Containing String ${resp} ${setting} |
| ... case-insensitive |
| ${setting_status}= Fetch From Right ${setting_line} :${SPACE} |
| |
| [Return] ${setting_status} |
| |
| |
| Get Record Count And Last Record From SDR |
| [Documentation] Returns total record count from IPMI SDR Info and last SDR record. |
| |
| # Returns Record count from IPMI SDR Info. |
| ${record_count}= Get IPMI SDR Status Info Record Count |
| |
| # Identifies Last record ID. |
| # If Record Count = 58 (3Ah), record IDs range from 0 to 57. |
| # Then Last record ID will be 57 (in decimal) - 39h. |
| ${last_record}= Evaluate ${record_count} - 1 |
| |
| [Return] ${record_count} ${last_record} |
| |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup tasks. |
| Redfish.Login |
| Should Not Be Empty ${OS_HOST} msg=Please provide required parameter OS_HOST |
| Should Not Be Empty ${OS_USERNAME} msg=Please provide required parameter OS_USERNAME |
| Should Not Be Empty ${OS_PASSWORD} msg=Please provide required parameter OS_PASSWORD |